summaryrefslogtreecommitdiff
path: root/sound/soc
AgeCommit message (Collapse)AuthorFilesLines
2018-04-24ASoC: topology: Fix kcontrol name string handlingLiam Girdwood1-5/+18
commit 267e2c6fd7ca3d4076d20f9d52d49dc91addfe9d upstream. Fix the topology kcontrol string handling so that string pointer references are strdup()ed instead of being copied. This fixes issues with kcontrol templates on the stack or ones that are freed. Remember and free the strings too when topology is unloaded. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24ASoC: ssm2602: Replace reg_default_raw with reg_defaultJames Kelly1-6/+13
commit a01df75ce737951ad13a08d101306e88c3f57cb2 upstream. SSM2602 driver is broken on recent kernels (at least since 4.9). User space applications such as amixer or alsamixer get EIO when attempting to access codec controls via the relevant IOCTLs. Root cause of these failures is the regcache_hw_init function in drivers/base/regmap/regcache.c, which prevents regmap cache initalization from the reg_defaults_raw element of the regmap_config structure when registers are write only. It also disables the regmap cache entirely when all registers are write only or volatile as is the case for the SSM2602 driver. Using the reg_defaults element of the regmap_config structure rather than the reg_defaults_raw element to initalize the regmap cache avoids the logic in the regcache_hw_init function entirely. It also makes this driver consistent with other ASoC codec drivers, as this driver was the ONLY codec driver that used the reg_defaults_raw element to initalize the cache. Tested on Digilent Zybo Z7 development board which has a SSM2603 codec chip connected to a Xilinx Zynq SoC. Signed-off-by: James Kelly <jamespeterkelly@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-12ASoC: Intel: sst: Fix the return value of 'sst_send_byte_stream_mrfld()'Christophe JAILLET1-1/+1
[ Upstream commit eaadb1caa966a91128297b754e90b7c92b350a00 ] In some error handling paths, an error code is assiegned to 'ret'. However, the function always return 0. Fix it and return the error code if such an error paths is taken. Fixes: 3d9ff34622ba ("ASoC: Intel: sst: add stream operations") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-12ASoC: Intel: cht_bsw_rt5645: Analog Mic supportHans de Goede1-0/+7
[ Upstream commit b70b309950418437bbd2a30afd169c4f09dee3e5 ] Various Cherry Trail boards with a rt5645 codec have an analog mic connected to IN2P + IN2N. The mic on this boards also needs micbias to be enabled, on some boards micbias1 is used and on others micbias2, so we enable both. This commit adds a new "Int Analog Mic" DAPM widget for this, so that we do not end up enabling micbias on boards with a digital mic which uses the already present "Int Mic" widget. Some existing UCM files already refer to "Int Mic" for their "Internal Analog Microphones" SectionDevice, but these don't work anyways since they enable the RECMIX BST1 Switch instead of the BST2 switch. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-12ASoC: Intel: Skylake: Disable clock gating during firmware and library downloadPardha Saradhi K2-0/+8
[ Upstream commit d5cc0a1fcbb5ddbef9fdd4c4a978da3254ddbf37 ] During firmware and library download, sometimes it is observed that firmware and library download is timed-out resulting into probe failure. This patch disables dynamic clock gating while firmware and library download. Signed-off-by: Pardha Saradhi K <pardha.saradhi.kesapragada@intel.com> Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19ASoC: nuc900: Fix a loop timeout testDan Carpenter1-2/+2
[ Upstream commit 65a12b3aafed5fc59f4ce41b22b752b1729e6701 ] We should be finishing the loop with timeout set to zero but because this is a post-op we finish with timeout == -1. Fixes: 1082e2703a2d ("ASoC: NUC900/audio: add nuc900 audio driver support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19ASoC: rt5651: Fix regcache sync errors on resumeHans de Goede1-0/+1
commit 2d30e9494f1ea320aaaad0cff9ddd92c87eac355 upstream. The ALC5651 does not like multi-write accesses, avoid them. This fixes: rt5651 i2c-10EC5651:00: Unable to sync registers 0x27-0x28. -121 Errors on resume (and all registers after the registers in the error not being synced). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19ASoC: wm_adsp: For TLV controls only register TLV get/setRichard Fitzgerald1-6/+8
commit d7789f5bcdb298c4a302db471b1b20f74a20de95 upstream. Normal 512-byte get/set of a TLV isn't supported but we were registering the normal get/set anyway and relying on omitting the SNDRV_CTL_ELEM_ACCESS_[READ|WRITE] flags to prevent them being called. Trouble is if this gets broken in the core ALSA code - as it has been since at least 4.14 - the standard get/set can be called unexpectedly and corrupt memory. There's no point providing functions that won't be called and it's a trivial change. The benefit is that if the ALSA core gets broken again we get a big fat immediate NULL dereference instead of a memory corruption timebomb. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19ASoC: sgtl5000: Fix suspend/resumeFabio Estevam1-0/+11
commit a8992973edbb2555e956b90f6fe97c4bc14d761d upstream. Commit 8419caa72702 ("ASoC: sgtl5000: Do not disable regulators in SND_SOC_BIAS_OFF") causes the sgtl5000 to fail after a suspend/resume sequence: Playing WAVE '/media/a2002011001-e02.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo aplay: pcm_write:2051: write error: Input/output error The problem is caused by the fact that the aforementioned commit dropped the cache handling, so re-introduce the register map resync to fix the problem. Suggested-by: Mark Brown <broonie@kernel.org> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19ASoC: sun4i-i2s: Fix RX slot number of SUN8IYong Deng1-1/+1
commit 5a3386790a172cf738194e1574f631cd43c6140a upstream. I2S's RX slot number of SUN8I should be shifted 4 bit to left. Fixes: 7d2993811a1e ("ASoC: sun4i-i2s: Add support for H3") Signed-off-by: Yong Deng <yong.deng@magewell.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15ASoC: Intel: kbl: fix jack nameVinod Koul1-1/+1
commit cedb6415f9ece6d3368aa0ac8a433caff799792a upstream. Commit d1c4cb447a7e ("ASoC: Intel: Skylake: Fix jack name format substitution") added Jack name but erroneously added a space as well, so remove the space in Jack name. Fixes: d1c4cb447a7e ("ASoC: Intel: Skylake: Fix jack name format substitution") Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15ASoC: Intel: Skylake: Fix jack name format substitutionChintan Patel1-0/+2
commit d1c4cb447a7efcb5608a33cdfed8ab4234378b0a upstream. Jack name is not getting formatted correctly hence resulting in invalid name for HDMI/DP input devices. This was recently exposed due changes brought by MST: commit 3a13347f05fd ("ASoC: Intel: kbl: Add jack port initialize in kbl machine drivers") Signed-off-by: Chintan Patel <chintan.m.patel@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-03ASoC: rsnd: fixup ADG register maskKuninori Morimoto1-3/+3
[ Upstream commit d5aa24825da5711f8cb829f873160ddf1a29b19c ] BRGCKR should use 0x80770000, instead of 0x80FF0000. R-Car Gen2 xxx_TIMSEL should use 0x0F1F, R-Car Gen3 xxx_TIMSEL should use 0x1F1F. Here, Gen3 doesn't support AVD, thus, both case can use 0x0F1F. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-03ASoC: nau8825: fix issue that pop noise when start captureAbhijeet Kumar1-0/+1
[ Upstream commit d070f7c703ef26e3db613f24206823f916272fc6 ] In skylake platform, we hear a loud pop noise(0 dB) at start of audio capture power up sequence. This patch removes the pop noise from the recording by adding a delay before enabling ADC. Signed-off-by: Abhijeet Kumar <abhijeet.kumar@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25ASoC: rsnd: ssi: fix race condition in rsnd_ssi_pointer_updateJiada Wang1-6/+10
[ Upstream commit 33f801366bdf3f8b67dfe325b84f4051a090d01e ] Currently there is race condition between set of byte_pos and wrap it around when new buffer starts. If .pointer is called in-between it will result in inconsistent pointer position be returned from .pointer callback. This patch increments buffer pointer atomically to avoid this issue. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Reviewed-by: Takashi Sakamoto <takashi.sakamoto@miraclelinux.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25ASoC: rockchip: disable clock on errorStefan Potyra1-5/+13
[ Upstream commit c7b92172a61b91936be985cb9bc499a4ebc6489b ] Disable the clocks in rk_spdif_probe when an error occurs after one of the clocks has been enabled previously. Found by Linux Driver Verification project (linuxtesting.org). Fixes: f874b80e1571 ASoC: rockchip: Add rockchip SPDIF transceiver driver Signed-off-by: Stefan Potyra <Stefan.Potyra@elektrobit.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25ASoC: ux500: add MODULE_LICENSE tagArnd Bergmann2-0/+9
commit 1783c9d7cb7bc3181b9271665959b87280d98d8e upstream. This adds MODULE_LICENSE/AUTHOR/DESCRIPTION tags to the ux500 platform drivers, to avoid these build warnings: WARNING: modpost: missing MODULE_LICENSE() in sound/soc/ux500/snd-soc-ux500-plat-dma.o WARNING: modpost: missing MODULE_LICENSE() in sound/soc/ux500/snd-soc-ux500-mach-mop500.o The company no longer exists, so the email addresses of the authors don't work any more, but I've added them anyway for consistency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22ASoC: acpi: fix machine driver selection based on quirkPierre-Louis Bossart1-5/+3
commit 5c256045b87b8aa8e5bc9d2e2fdc0802351c1f99 upstream. The ACPI/machine-driver code refactoring introduced in 4.13 introduced a regression for cases where we need a DMI-based quirk to select the machine driver (the BIOS reports an invalid HID). The fix is just to make sure the results of the quirk are actually used. Fixes: 54746dabf770 ('ASoC: Improve machine driver selection based on quirk data') Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96691 Tested-by: Nicole Færber <nicole.faerber@dpin.de> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-16ASoC: skl: Fix kernel warning due to zero NHTL entryTakashi Iwai1-1/+2
commit 20a1ea2222e7cbf96e9bf8579362e971491e6aea upstream. I got the following kernel warning when loading snd-soc-skl module on Dell Latitude 7270 laptop: memremap attempted on mixed range 0x0000000000000000 size: 0x0 WARNING: CPU: 0 PID: 484 at kernel/memremap.c:98 memremap+0x8a/0x180 Call Trace: skl_nhlt_init+0x82/0xf0 [snd_soc_skl] skl_probe+0x2ee/0x7c0 [snd_soc_skl] .... It seems that the machine doesn't support the SKL DSP gives the empty NHLT entry, and it triggers the warning. For avoiding it, let do the zero check before calling memremap(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-16ASoC: rockchip: i2s: fix playback after runtime resumeJohn Keeping1-0/+6
commit c66234cfedfc3e6e3b62563a5f2c1562be09a35d upstream. When restoring registers during runtime resume, we must not write to I2S_TXDR which is the transmit FIFO as this queues up a sample to be output and pushes all of the output channels down by one. This can be demonstrated with the speaker-test utility: for i in a b c; do speaker-test -c 2 -s 1; done which should play a test through the left speaker three times but if the I2S hardware starts runtime suspended the first sample will be played through the right speaker. Fix this by marking I2S_TXDR as volatile (which also requires marking it as readble, even though it technically isn't). This seems to be the most robust fix, the alternative of giving I2S_TXDR a default value is more fragile since it does not prevent regcache writing to the register in all circumstances. While here, also fix the configuration of I2S_RXDR and I2S_FIFOLR; these are not writable so they do not suffer from the same problem as I2S_TXDR but reading from I2S_RXDR does suffer from a similar problem. Fixes: f0447f6cbb20 ("ASoC: rockchip: i2s: restore register during runtime_suspend/resume cycle", 2016-09-07) Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-07ASoC: pcm512x: add missing MODULE_DESCRIPTION/AUTHOR/LICENSEJesse Chan1-0/+4
commit 0cab20cec0b663b7be8e2be5998d5a4113647f86 upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in sound/soc/codecs/snd-soc-pcm512x-spi.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by: Jesse Chan <jc@linux.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02ASoC: tlv320aic31xx: Fix GPIO1 register definitionAndrew F. Davis1-1/+1
commit 737e0b7b67bdfe24090fab2852044bb283282fc5 upstream. GPIO1 control register is number 51, fix this here. Fixes: bafcbfe429eb ("ASoC: tlv320aic31xx: Make the register values human readable") Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02ASoC: twl4030: fix child-node lookupJohan Hovold1-1/+3
commit 15f8c5f2415bfac73f33a14bcd83422bcbfb5298 upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent codec node was also prematurely freed, while the child node was leaked. Fixes: 2d6d649a2e0f ("ASoC: twl4030: Support for DT booted kernel") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02ASoC: fsl_ssi: AC'97 ops need regmap, clock and cleaning up on failureMaciej S. Szmigiero1-6/+12
commit 695b78b548d8a26288f041e907ff17758df9e1d5 upstream. AC'97 ops (register read / write) need SSI regmap and clock, so they have to be set after them. We also need to set these ops back to NULL if we fail the probe. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02ASoC: da7218: fix fix child-node lookupJohan Hovold1-1/+1
commit bc6476d6c1edcb9b97621b5131bd169aa81f27db upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent codec node was also prematurely freed. Fixes: 4d50934abd22 ("ASoC: da7218: Add da7218 codec driver") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02ASoC: wm_adsp: Fix validation of firmware and coeff lengthsBen Hutchings1-6/+6
commit 50dd2ea8ef67a1617e0c0658bcbec4b9fb03b936 upstream. The checks for whether another region/block header could be present are subtracting the size from the current offset. Obviously we should instead subtract the offset from the size. The checks for whether the region/block data fit in the file are adding the data size to the current offset and header size, without checking for integer overflow. Rearrange these so that overflow is impossible. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02ASoC: codecs: msm8916-wcd: Fix supported formatsSrinivas Kandagatla2-3/+3
commit 51f493ae71adc2c49a317a13c38e54e1cdf46005 upstream. This codec is configurable for only 16 bit and 32 bit samples, so reflect this in the supported formats also remove 24bit sample from supported list. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25ASoC: codecs: msm8916-wcd-analog: fix module autoloadNicolas Dechesne1-0/+2
[ Upstream commit 46d69e141d479585c105a4d5b2337cd2ce6967e5 ] If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo snd_soc_msm8916_analog | grep alias $ After this patch: $ modinfo snd_soc_msm8916_analog | grep alias alias: of:N*T*Cqcom,pm8916-wcd-analog-codecC* alias: of:N*T*Cqcom,pm8916-wcd-analog-codec Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25ASoC: img-parallel-out: Add pm_runtime_get/put to set_fmt callbackEd Blake1-0/+2
[ Upstream commit c70458890ff15d858bd347fa9f563818bcd6e457 ] Add pm_runtime_get_sync and pm_runtime_put calls to set_fmt callback function. This fixes a bus error during boot when CONFIG_SUSPEND is defined when this function gets called while the device is runtime disabled and device registers are accessed while the clock is disabled. Signed-off-by: Ed Blake <ed.blake@sondrel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25ASoC: codecs: msm8916-wcd-analog: fix micbias levelJean-François Têtu1-3/+4
[ Upstream commit 664611e7e02f76fbc5470ef545b2657ed25c292b ] The macro used to set the microphone bias level causes the snd_soc_write() call to overwrite other fields in the CDC_A_MICB_1_VAL register. The macro also does not return the proper level value to use. This fixes this by preserving all bits from the register that are not the level while setting the level. Signed-off-by: Jean-François Têtu <jean-francois.tetu@savoirfairelinux.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20ASoC: rsnd: rsnd_ssi_run_mods() needs to care ssi_parent_modKuninori Morimoto1-3/+8
[ Upstream commit 21781e87881f9c420871b1d1f3f29d4cd7bffb10 ] SSI parent mod might be NULL. ssi_parent_mod() needs to care about it. Otherwise, it uses negative shift. This patch fixes it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20ASoC: Intel: Skylake: Fix uuid_module memory leak in failure casePankaj Bharadiya1-4/+11
[ Upstream commit f8e066521192c7debe59127d90abbe2773577e25 ] In the loop that adds the uuid_module to the uuid_list list, allocated memory is not properly freed in the error path free uuid_list whenever any of the memory allocation in the loop fails to avoid memory leak. Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30ASoC: sun8i-codec: Set the BCLK dividerMaxime Ripard1-0/+51
commit 316b7758c998fb13371d14bb6c9e45ab129c19a7 upstream. While the current code was reporting to be able to work in master mode, it failed to do so because the BCLK divider wasn't programmed, meaning that the BCLK would run at the PLL's frequency no matter the sample rate. It was obviously a bit too fast. Add support to retrieve the divider to use, and set it. Since our PLL is not always able to generate a perfect multiple of the sample rate, we'll have to choose the closest divider that matches our setup. Fixes: 36c684936fae ("ASoC: Add sun8i digital audio codec") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30ASoC: sun8i-codec: Fix left and right channels inversionMaxime Ripard1-1/+1
commit 18c1bf35c1c09bca05cf70bc984a4764e0b0372b upstream. Since its introduction, the codec had an inversion of the left and right channels. It turned out to be pretty simple as it appears that the codec doesn't have the same polarity on the LRCK signal than the I2S block. Fix this by inverting our bit value for the LRCK inversion. Fixes: 36c684936fae ("ASoC: Add sun8i digital audio codec") Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30ASoC: sun8i-codec: Invert Master / Slave conditionMaxime Ripard1-4/+4
commit 560bfe774f058e97596f30ff71cffdac52b72914 upstream. The current code had the condition backward when checking if the codec should be running in slave or master mode. Fix it, and make the comment a bit more readable. Fixes: 36c684936fae ("ASoC: Add sun8i digital audio codec") Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds49-0/+49
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman49-0/+49
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01Merge remote-tracking branches 'asoc/fix/topology', 'asoc/fix/adau17x1', ↵Mark Brown10-73/+53
'asoc/fix/rt5514', 'asoc/fix/rt5616', 'asoc/fix/rt5659' and 'asoc/fix/rt5663' into tmp
2017-10-21ASoC: rt5616: fix 0x91 default valueBard Liao1-1/+1
The default value of register 0x91 is 0x0c00 instead of 0x0000. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-18ASoC: rt5659: connect LOUT Amp with Charge PumpBard Liao1-0/+1
"Charge Pump" is necessary for "LOUT Amp". Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-18ASoC: rt5659: register power bit of LOUT AmpBard Liao1-1/+2
There is a power bit for LOUT Amp. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-25ASoC: rt5663: Change the dev getting function in rt5663_irqoder_chiou@realtek.com1-1/+2
In the irq handler "rt5663_irq", while the codec is not initialized, rt5663->codec will be null, and it will cause the kernel panic in the debug print enabled. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-15ASoC: rt5514: Revert Hotword Model controlHsin-Yu Chao2-66/+0
This reverts commit eb33869c7206 ("ASoC: rt5514: Guard Hotword Model bytes loading") and commit d18420b0a0b8 ("ASoC: rt5514: expose Hotword Model control") It is discouraged to use SND_SOC_BYTES_TLV to load arbitrary bytes from userspace to driver. Removing the 'Hotword Model' control until we have a good way to verify the content of hotword model blobs. Signed-off-by: Hsin-Yu Chao <hychao@chromium.org> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-15ASoC: topology: Fix a potential memory leak in ↵Christophe JAILLET1-1/+1
'soc_tplg_dapm_widget_denum_create()' If this sanity check fails, we must free the memory that has already been allocated. So we must go to 'err' as in the other error handling parth of this function. Fixes: 1a7dd6e2f192 ("ASoC: topology: Allow a widget to have multiple enum controls") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-15ASoC: topology: Fix a potential NULL pointer dereference in ↵Christophe JAILLET1-0/+3
'soc_tplg_dapm_widget_denum_create()' if 'se = kzalloc()' fails in the 'for' loop, we will branch to 'err'. But in this case, 'kc[i].private_value' will still be NULL. A NULL pointer dereference will then occur is the error handling path. In such a case, it is safe to just 'continue' in order to skip this entry and free the other ones. Fixes: 1a7dd6e2f192 ("ASoC: topology: Allow a widget to have multiple enum controls") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-14dmi: Mark all struct dmi_system_id instances constChristoph Hellwig1-1/+1
... and __initconst if applicable. Based on similar work for an older kernel in the Grsecurity patch. [JD: fix toshiba-wmi build] [JD: add htcpen] [JD: move __initconst where checkscript wants it] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2017-09-13Merge tag 'clk-for-linus' of ↵Linus Torvalds1-33/+14
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The diff is dominated by the Allwinner A10/A20 SoCs getting converted to the sunxi-ng framework. Otherwise, the heavy hitters are various drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are some other new clk drivers in here too but overall this is just a bunch of clk drivers for various different pieces of hardware and a collection of non-critical fixes for clk drivers. New Drivers: - Allwinner R40 SoCs - Renesas R-Car Gen3 USB 2.0 clock selector PHY - Atmel AT91 audio PLL - Uniphier PXs3 SoCs - ARC HSDK Board PLLs - AXS10X Board PLLs - STMicroelectronics STM32H743 SoCs Removed Drivers: - Non-compiling mb86s7x support Updates: - Allwinner A10/A20 SoCs converted to sunxi-ng framework - Allwinner H3 CPU clk fixes - Renesas R-Car D3 SoC - Renesas V2H and M3-W modules - Samsung Exynos5420/5422/5800 audio fixes - Rockchip fractional clk approximation fixes - Rockchip rk3126 SoC support within the rk3128 driver - Amlogic gxbb CEC32 and sd_emmc clks - Amlogic meson8b reset controller support - IDT VersaClock 5P49V5925/5P49V6901 support - Qualcomm MSM8996 SMMU clks - Various 'const' applications for struct clk_ops - si5351 PLL reset bugfix - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2 - Assorted Tegra clk driver fixes" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (120 commits) clk: si5351: fix PLL reset ASoC: atmel-classd: remove aclk clock ASoC: atmel-classd: remove aclk clock from DT binding clk: at91: clk-generated: make gclk determine audio_pll rate clk: at91: clk-generated: create function to find best_diff clk: at91: add audio pll clock drivers dt-bindings: clk: at91: add audio plls to the compatible list clk: at91: clk-generated: remove useless divisor loop clk: mb86s7x: Drop non-building driver clk: ti: check for null return in strrchr to avoid null dereferencing clk: Don't write error code into divider register clk: uniphier: add video input subsystem clock clk: uniphier: add audio system clock clk: stm32h7: Add stm32h743 clock driver clk: gate: expose clk_gate_ops::is_enabled clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled() clk: uniphier: add PXs3 clock data clk: hi6220: change watchdog clock source clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808 clk: cs2000: Add cs2000_set_saved_rate ...
2017-09-13ASoC: rt5514-spi: check irq status to schedule data copyHsin-Yu Chao2-2/+18
For wake on voice use case, we need to copy data from DSP buffer to PCM stream when system wakes up by voice. However the edge triggered IRQ could be missed when system wakes up, in that case the irq function will not be called. Fix that by checking the irq status bit and schedule data copy accordingly. Signed-off-by: Hsin-Yu Chao <hychao@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-09linux/kernel.h: move DIV_ROUND_DOWN_ULL() macroMasahiro Yamada1-3/+0
This macro is useful to avoid link error on 32-bit systems. We have the same definition in two drivers, so move it to include/linux/kernel.h While we are here, refactor DIV_ROUND_UP_ULL() by using DIV_ROUND_DOWN_ULL(). Link: http://lkml.kernel.org/r/1500945156-12907-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Mark Brown <broonie@kernel.org> Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07Merge tag 'mfd-next-4.14' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers - RK805 Power Management IC (PMIC) - ROHM BD9571MWV-M MFD Power Management IC (PMIC) - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs New Device Support: - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core - Add support for X-Powers AXP806 to axp20x - Add support for X-Powers AXP813 to axp20x - Add support for Intel Sunrise Point LPSS to intel-lpss-pci New Functionality: - Amend API to provide register layout; atmel-smc Fix-ups: - DT re-work; omap, nokia - Header file location change {I2C => MFD}; dm355evm_msp, tps65010 - Fix chip ID formatting issue(s); rk808 - Optionally register touchscreen devices; da9052-core - Documentation improvements; twl-core - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi - Drop unnecessary static declaration; max8925-i2c - Kconfig changes (missing deps and remove module support) - Slim down oversized licence statement; hi6421-pmic-core - Use managed resources (devm_*); lp87565 - Supply proper error checking/handling; t7l66xb Bug Fixes: - Fix counter duplication issue; da9052-core - Fix potential NULL deference issue; max8998 - Leave SPI-NOR write-protection bit alone; lpc_ich - Ensure device is put into reset during suspend; intel-lpss - Correct register offset variable size; omap-usb-tll" * tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits) mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT dt-bindings: mfd: Add bindings for ZII RAVE devices mfd: omap-usb-tll: Fix register offsets mfd: da9052: Constify spi_device_id mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend mfd: da9055: Constify i2c_device_id mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices mfd: t7l66xb: Handle return value of clk_prepare_enable mfd: Add ROHM BD9571MWV-M PMIC DT bindings mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool mfd: lp87565: Convert to use devm_mfd_add_devices() mfd: Add support for TPS68470 device mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell mfd: syscon: atmel-smc: Add helper to retrieve register layout mfd: axp20x: Use correct platform device ID for many PEK dt-bindings: mfd: axp20x: Introduce bindings for AXP813 mfd: axp20x: Add support for AXP813 PMIC dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips mfd: Add ROHM BD9571MWV-M MFD PMIC driver ...