summaryrefslogtreecommitdiff
path: root/sound/soc/sh/rcar
AgeCommit message (Collapse)AuthorFilesLines
2019-03-23ASoC: rsnd: fixup rsnd_ssi_master_clk_start() user count checkKuninori Morimoto1-1/+1
[ Upstream commit d9111d36024de07784f2e1ba2ccf70b16035f378 ] commit 4d230d1271064 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") added new rsnd_ssi_prepare() and moved rsnd_ssi_master_clk_start() to .prepare. But, ssi user count (= ssi->usrcnt) is incremented at .init (= rsnd_ssi_init()). Because of these timing exchange, ssi->usrcnt check at rsnd_ssi_master_clk_start() should be adjusted. Otherwise, 2nd master clock setup will be no check. This patch fixup this issue. Fixes: commit 4d230d1271064 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Reported-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-17ASoC: rsnd: fixup clock start checkerKuninori Morimoto1-1/+1
[ Upstream commit 3ee9a76a8c5a10e1bfb04b81db767c6d562ddaf3 ] commit 4d230d12710646 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") fixuped clock start timing. But it exchanged clock start checker from ssi->usrcnt to ssi->rate. Current rsnd_ssi_master_clk_start() is called from .prepare, but some player (for example GStreamer) might calls it many times. In such case, the checker might returns error even though it was not error. It should check ssi->usrcnt instead of ssi->rate. This patch fixup it. Without this patch, GStreamer can't switch 48kHz / 44.1kHz. Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-09-06ASoC: rsnd: don't fallback to PIO mode when -EPROBE_DEFERKuninori Morimoto2-1/+13
Current rsnd driver will fallback to PIO mode if it can't get DMA handler. But, DMA might return -EPROBE_DEFER when probe timing. This driver always fallback to PIO mode especially from commit ac6bbf0cdf4206c ("iommu: Remove IOMMU_OF_DECLARE") because of this reason. The DMA driver will be probed later, but sound driver might be probed as PIO mode in such case. This patch fixup this issue. Then, -EPROBE_DEFER is not error. Thus, let's don't indicate error message in such case. And it needs to call rsnd_adg_remove() individually if probe failed, because it registers clk which should be unregister. Maybe PIO fallback feature itself is not needed, but let's keep it so far. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-06ASoC: rsnd: adg: care clock-frequency sizeKuninori Morimoto1-0/+5
ADG has buffer over flow bug if DT has more than 3 clock-frequency. This patch fixup this issue, and uses first 2 values. clock-frequency = <x y>; /* this is OK */ clock-frequency = <x y z>; /* this is NG */ Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ASoC: rsnd: fixup not to call clk_get/set under non-atomicJiada Wang3-6/+28
Clocking operations clk_get/set_rate, are non-atomic, they shouldn't be called in soc_pcm_trigger() which is atomic. Following issue was found due to execution of clk_get_rate() causes sleep in soc_pcm_trigger(), which shouldn't be blocked. We can reproduce this issue by following > enable CONFIG_DEBUG_ATOMIC_SLEEP=y > compile, and boot > mount -t debugfs none /sys/kernel/debug > while true; do cat /sys/kernel/debug/clk/clk_summary > /dev/null; done & > while true; do aplay xxx; done This patch adds support to .prepare callback, and moves non-atomic clocking operations to it. As .prepare is non-atomic, it is always called before trigger_start/trigger_stop. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 in_atomic(): 1, irqs_disabled(): 128, pid: 2242, name: aplay INFO: lockdep is turned off. irq event stamp: 5964 hardirqs last enabled at (5963): [<ffff200008e59e40>] mutex_lock_nested+0x6e8/0x6f0 hardirqs last disabled at (5964): [<ffff200008e623f0>] _raw_spin_lock_irqsave+0x24/0x68 softirqs last enabled at (5502): [<ffff200008081838>] __do_softirq+0x560/0x10c0 softirqs last disabled at (5495): [<ffff2000080c2e78>] irq_exit+0x160/0x25c Preemption disabled at:[ 62.904063] [<ffff200008be4d48>] snd_pcm_stream_lock+0xb4/0xc0 CPU: 2 PID: 2242 Comm: aplay Tainted: G B C 4.9.54+ #186 Hardware name: Renesas Salvator-X board based on r8a7795 (DT) Call trace: [<ffff20000808fe48>] dump_backtrace+0x0/0x37c [<ffff2000080901d8>] show_stack+0x14/0x1c [<ffff2000086f4458>] dump_stack+0xfc/0x154 [<ffff2000081134a0>] ___might_sleep+0x57c/0x58c [<ffff2000081136b8>] __might_sleep+0x208/0x21c [<ffff200008e5980c>] mutex_lock_nested+0xb4/0x6f0 [<ffff2000087cac74>] clk_prepare_lock+0xb0/0x184 [<ffff2000087cb094>] clk_core_get_rate+0x14/0x54 [<ffff2000087cb0f4>] clk_get_rate+0x20/0x34 [<ffff20000113aa00>] rsnd_adg_ssi_clk_try_start+0x158/0x4f8 [snd_soc_rcar] [<ffff20000113da00>] rsnd_ssi_init+0x668/0x7a0 [snd_soc_rcar] [<ffff200001133ff4>] rsnd_soc_dai_trigger+0x4bc/0xcf8 [snd_soc_rcar] [<ffff200008c1af24>] soc_pcm_trigger+0x2a4/0x2d4 Fixes: e7d850dd10f4 ("ASoC: rsnd: use mod base common method on SSI-parent") Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [Kuninori: tidyup for upstream] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-07-05ASoC: rsnd: cmd: Add missing newline to debug messageAndrew Gabbasov1-1/+1
To comply with the style of all kernel messages, add newline to the end of every message. Fixes: 70fb10529f61 ("ASoC: rsnd: add MIX (Mixer) support") Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-22Merge branch 'asoc-4.18' into asoc-4.19 for amd depMark Brown2-13/+30
2018-06-18ASoC: rsnd: add rsnd_daidrv_get()Kuninori Morimoto1-1/+10
rsnd priv has many parameters. On __rsnd_dai_probe() it uses rsnd_rdai_get() to get rdai pointer, but is using priv->daidrv directly to get daidrvhv, but it is confusable for reader. This patch adds rsnd_daidrv_get() to get daidrv from priv. Now reader can understand that rdai and daidrv are related. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-18ASoC: rsnd: SSI parent cares SWSP bitKuninori Morimoto1-11/+21
SSICR has SWSP bit (= Serial WS Polarity) which decides WS pin 1st channel polarity (low or hi). This bit shouldn't exchange after running. Current SSI "parent" doesn't care SSICR, just controls clock only. Because of this behavior, if platform uses SSI0 as playback, SSI1 as capture, and if user starts capture -> playback order, SSI0 SSICR::SWSP bit exchanged 0 -> 1 during captureing, and it makes capture noise. This patch cares SSICR on SSI parent, too. Special thanks to Yokoyama-san Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-18ASoC: rsnd: has .symmetric_rates if SSIs are sharing WS pinKuninori Morimoto2-2/+9
If SSIs are sharing WS pin, it should has .symmetric_rates. This patch sets it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-18ASoC: rsnd: convert to SPDX identifiersKuninori Morimoto13-123/+82
Tidyup incoherence between MODULE_LICENSE and header license, too Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-13treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook8-9/+9
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-16Merge branch 'asoc-4.17' into asoc-4.18 to get adau17x1 changes soMark Brown1-2/+2
further patches can be applied.
2018-04-16ASoC: rsnd: ssi: wait maximum 5ms for status checkKuninori Morimoto1-1/+1
It is waiting udelay(50) x 1024 (= 50ms) for status check in worst case, but it is overkill. And we shouldn't use udelay() for 50us (linux/Documentation/timers/timers-howto.txt) Waiting maximum udelay(5) x 1024 (= 5ms) is very enough for status check. This patch fixes these issue. Reported-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-16ASoC: rsnd: Enable IPMMU v2Kuninori Morimoto3-5/+50
commit 4821d914fe747 ("ASoC: rsnd: use dma_sync_single_for_xxx() for IOMMU") (= v1) which have been already reverted had supported IPMMU support on rsnd driver. Because memory allocating timing and DMAEngine access timing were different, it used continuous memory and called dma map function by itself. OTOH, it is using DMA descriptor mode (= DMA cyclic mode), thus, there was timing conflict between DMA sync/unsync and DMA transfer starting, and it maked sound noise. This patch supports IPMMU with coherent memory, and, it uses Audio DMAC dev for allocating memory by snd_pcm_lib_preallocate_pages_for_all() to indicate memory area to IPMMU. One note is that Playback/Capture need each paired Audio DMAC dev. Because of this, we need to keep each paired Audio DMAC dev when probing, and use it when allocating each memory for IPMMU. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-16ASoC: rsnd: don't assume node full path name for HDMI probingKuninori Morimoto1-2/+9
Current ssi.c is assuming below 2 things to probing HDMI node. 1) remote node is including "hdmi0" or "hdmi1" in node name 2) remote_ep->full_name is including full path name But, these assumptions are broken by below 1) Node names should not use numerical suffixes commit 6b5ac2f1cb11 ("arm64: dts: renesas: r8a7795: Drop bogus HDMI node names suffixes") 2) node full_name no longer include full path name commit a7e4cfb0a7ca ("of/fdt: only store the device node basename in full_name") Because of these reasons, ssi.c can't probe HDMI on current kernel. This patch probes HDMI0/1 by using its address. Note is that we need to keep updating for this address for future generation chip. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-16ASoC: rsnd: add RSND_GEN3 for R-Car Gen3Kuninori Morimoto4-4/+7
rsnd driver is supporting Gen3. The difference between Gen1 and Gen2 were very big, but, between Gen2 and Gen3 are not so much. Thus, it is assuming Gen2 and Gen3 have compatible, therefore, there is no RSND_GEN3 and rsnd_is_gen3() macro. But in the future, it will need Gen2 and Gen3 different operation, and for Gen4. This patch adds missing RSND_GEN3 and rsnd_is_gen3() macro. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-16ASoC: rsnd: makes rsnd_cmd_mod_get() staticKuninori Morimoto2-9/+7
rsnd_cmd_mod_get() is used from cmd.c only. Let's makes it static function Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-12ASoC: rsnd: mark PM functions __maybe_unusedArnd Bergmann1-2/+2
The suspend/resume callbacks are now optional, leading to a warning when they are unused: sound/soc/sh/rcar/core.c:1548:12: error: 'rsnd_resume' defined but not used [-Werror=unused-function] static int rsnd_resume(struct device *dev) ^~~~~~~~~~~ sound/soc/sh/rcar/core.c:1539:12: error: 'rsnd_suspend' defined but not used [-Werror=unused-function] static int rsnd_suspend(struct device *dev) This marks the as __maybe_unused to avoid the warning. Fixes: f8a9a29c4fe9 ("ASoC: rsnd: set pm_ops in hibernate-compatible way") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-28Merge remote-tracking branches 'asoc/topic/pistachio', 'asoc/topic/pxa', ↵Mark Brown4-6/+66
'asoc/topic/rsnd', 'asoc/topic/rt274' and 'asoc/topic/rt286' into asoc-next
2018-03-21ASoC: rsnd: set pm_ops in hibernate-compatible wayNikita Yushchenko1-2/+1
Use SET_SYSTEM_SLEEP_PM_OPS() macro instead of direct assignment to .suspend and .resume fields. This makes driver working after restore from hibernation. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-13ASoC: rsnd: suppress rsnd_dai_call() debug messageKuninori Morimoto2-1/+20
rsnd_dai_call() is using dev_dbg(), but its message is sometimes blocks nessesary other messages. If RSND_DEBUG_NO_DAI_CALL was defined it will be suppressed by this patch. Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-13ASoC: rsnd: indicate IRQ error status for debugKuninori Morimoto3-3/+45
SSI/SRC have under/over flow error handling, and its status is useful for debuging. But sometimes it might be too much message, and it might blocks necessity other information. To avoid such situation, basically this patch indicates interrupt status debug message if DEBUG was defined, but it will be suppressed if RSND_DEBUG_NO_IRQ_STATUS was defined. Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12ASoC: sh: rsnd: replace platform to componentKuninori Morimoto1-18/+4
Now platform can be replaced to component, let's do it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05Merge remote-tracking branch 'asoc/topic/rcar' into asoc-nextMark Brown4-167/+172
2017-12-20ASoC: rsnd: fixup ADG register maskKuninori Morimoto1-3/+3
BRGCKR should use 0x80770000, instead of 0x80FF0000. R-Car Gen2 xxx_TIMSEL should use 0x0F1F, R-Car Gen3 xxx_TIMSEL should use 0x1F1F. Here, Gen3 doesn't support AVD, thus, both case can use 0x0F1F. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-11ASoC: rsnd: remove unneeded "is_graph" from __rsnd_dai_probe()Kuninori Morimoto1-3/+3
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-11ASoC: rsnd: PIO related function cleanupKuninori Morimoto1-81/+72
SSI had shared counting pointer position method between PIO/DMA mode before. But now DMA mode is using DMAEngine feature to get it. Thus, this counting pointer position method is needed for only PIO mode. We don't need to share code anymore. This patch names PIO related functions as rsnd_ssi_pio_xxx(), and merged/cleanuped each feature. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-11ASoC: rsnd: don't use runtime->sample_bitsKuninori Morimoto2-14/+7
Current rsnd driver is judging 16bit/24bit data by using runtime->sample_bits, but it is indicating physical size, not format size. This is confusable code. This patch uses snd_pcm_format_width() to be more correct code. Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-08ASoC: rsnd: more clear rsnd_get_dalign() for DALIGNKuninori Morimoto1-23/+10
On Renesas sound device, DALIGN which exchanges channel position is needed because SW and HW are using defferent data order if 16bit data. It is not needed when 24bit data. rsnd_get_dalign() returns necessary value, but it was confusable code. This patch makes it more simple. Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-08ASoC: rsnd: ssi: remove unnesessary period_posJiada Wang1-6/+3
period_pos can always be calculated by byte_pos and byte_per_period, there is no reason to maintain this variable in rsnd_dai_stream. This patch removes period_pos from rsnd_ssi and calculates next_period_byte with consideration of actual byte_pos value. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-08Merge branch 'fix/rcar' of ↵Mark Brown2-7/+14
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-rcar
2017-12-08ASoC: rsnd: ssi: fix race condition in rsnd_ssi_pointer_updateJiada Wang1-6/+10
Currently there is race condition between set of byte_pos and wrap it around when new buffer starts. If .pointer is called in-between it will result in inconsistent pointer position be returned from .pointer callback. This patch increments buffer pointer atomically to avoid this issue. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Reviewed-by: Takashi Sakamoto <takashi.sakamoto@miraclelinux.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-29ASoC: rsnd: dma.c: spin lock is no longer needed in IRQ handlerKuninori Morimoto1-18/+0
DMA handler had needed to calculate pointer before, but it doesn't need now. Thus, we can remove unnecessary spin lock from DMAC handler. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-29ASoC: rsnd: TDM 6ch needs 8ch clock for hw refineKuninori Morimoto2-27/+80
Renesas sound needs 8ch clock if TDM 6ch mode, and needs 2ch clock for 6ch or 8ch sound if Multi SSI mode. And these are related to before/after CTU (= Channel Transfer Unit). To calculate these we already has rsnd_runtime_channel_for_ssi() which returns runtime necessary channels. But, it based on runtime->channels which is not yet set when hw refine. We need to use hw_params instead of runtime->xxx when hw refine, and it is not needed after runtime was set. This patch adds new hw_params on rsnd_dai_stream, and it will be removed on rsnd_hw_params(). This is very temporary durty code, but it seems no choice at this point. Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-28ASoC: rsnd: call snd_soc_disconnect_sync() when removeKuninori Morimoto1-0/+2
Renesas R-Car sound driver should be stopped if unbinded during playbacking/capturing. Otherwise clock open/close counter mismatch happen. One note is that we can't skip from remove function (= return -Exxx) in such case if user used unbind. Because unbind function doesn't check return value from each driver's remove function. This means we must to stop and remove driver in remove function. Now ASoC has snd_soc_disconnect_sync() for this purpose. Let's use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-28ASoC: rsnd: ssiu: clear SSI_MODE for non TDM Extended modesJiada Wang1-1/+4
register SSI_MODE is set when SSI works in TDM Extended, but it isn't reset when SSI starts to work in other modes, thus causes issues. This patch clearss SSI_MODE register when SSI works in modes other than TDM Extended. Fixes: 186fadc132f0 ("ASoC: rsnd: add TDM Extend Mode support") Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-16ASoC: rcar: revert IOMMU support so farKuninori Morimoto2-82/+8
commit 4821d914fe74 ("ASoC: rsnd: use dma_sync_single_for_xxx() for IOMMU") had supported IOMMU, but it breaks normal sound "recorde" and both PulseAudio's "playback/recorde". The sound will be noisy. That commit was using dma_sync_single_for_xxx(), and driver should make sure memory is protected during CPU or Device are using it. But if driver returns current "residue" data size correctly on pointer function, player/recorder will access to protected memory. IOMMU feature should be supported, but I don't know how to handle it without memory cache problem at this point. Thus, this patch simply revert it to avoid current noisy sound. Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Tested-by: Ryo Kodama <ryo.kodama.vz@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-11Merge remote-tracking branch 'asoc/topic/rcar' into asoc-nextMark Brown8-188/+400
2017-11-06ASoC: rsnd: return -EIO if rsnd_dmaen_request_channel() failedKuninori Morimoto1-3/+1
PTR_ERR(NULL) is success. Normally when a function returns both NULL and error pointers, it means that NULL is not a error. But, rsnd_dmaen_request_channel() returns NULL if requested resource was failed. Let's return -EIO if rsnd_dmaen_request_channel() was failed on rsnd_dmaen_nolock_start(). This patch fixes commit edce5c496c6a ("ASoC: rsnd: Request/Release DMA channel eachtime") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-01ASoC: rsnd: remove NULL check from rsnd_mod_name()/rsnd_mod_id()Kuninori Morimoto3-17/+21
Current rsnd driver has rsnd_mod_id() which returns mod ID, and it returns -1 if mod was NULL. In the same time, this driver has rsnd_mod_name() which returns mod name, and it returns "unknown" if mod or mod->ops was NULL. Basically these "mod" never be NULL, but the reason why rsnd driver has such behavior is that DMA path finder is assuming memory as "mod == NULL". Thus, current DMA path debug code prints like below. Here "unknown[-1]" means it was memory. ... rcar_sound ec500000.sound: unknown[-1] from rcar_sound ec500000.sound: src[0] to rcar_sound ec500000.sound: ctu[2] rcar_sound ec500000.sound: mix[0] rcar_sound ec500000.sound: dvc[0] rcar_sound ec500000.sound: ssi[0] rcar_sound ec500000.sound: audmac[0] unknown[-1] -> src[0] ... 1st issue is that it is confusable for user. 2nd issue is rsnd driver has something like below code. mask |= 1 << rsnd_mod_id(mod); Because of this kind of code, some statically code checker will reports "Shifting by a negative value is undefined behaviour". But this "mod" never be NULL, thus negative shift never happen. To avoid these issues, this patch adds new dummy "mem" to indicate memory, and use it to indicate debug information, and, remove unneeded "NULL mod" behavior from rsnd_mod_id() and rsnd_mod_name(). The debug information will be like below by this patch ... rcar_sound ec500000.sound: mem[0] from rcar_sound ec500000.sound: src[0] to rcar_sound ec500000.sound: ctu[2] rcar_sound ec500000.sound: mix[0] rcar_sound ec500000.sound: dvc[0] rcar_sound ec500000.sound: ssi[0] rcar_sound ec500000.sound: audmac[0] mem[0] -> src[0] ... Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-01ASoC: rsnd: rsnd_ssi_run_mods() needs to care ssi_parent_modKuninori Morimoto1-3/+8
SSI parent mod might be NULL. ssi_parent_mod() needs to care about it. Otherwise, it uses negative shift. This patch fixes it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-31ASoC: rsnd: Don't check SSISR::DIRQ when CaptureKuninori Morimoto1-6/+9
When stop case, it was Playback, it need to check all data were completely sent. But in Capture case, it might not receive data anymore. SSISR::DIRQ check is not need for Capture case. Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-31ASoC: rsnd: use snd_pcm_running() in rsnd_io_is_working()Kuninori Morimoto1-1/+4
Let's use more common style to checking running/working Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-31ASoC: rsnd: NULL check is not needed for clk_unprepare()Kuninori Morimoto1-2/+1
clk_unprepare() is checking parameter by IS_ERR_OR_NULL(). clk NULL check is not needed on rsnd_mod_quit() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-31ASoC: rsnd: tidyup rsnd_mod_next() for loop methodKuninori Morimoto1-4/+2
Let's remove point less "continue" Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-31ASoC: rsnd: don't use io->mod[] directlyKuninori Morimoto1-1/+1
We have rsnd_io_to_mod() macro. Let's use it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-13ASoC: rsnd: more clear ADG clock debug infoKuninori Morimoto1-18/+41
ADG inputs clock from CLK{A,B,C,I} and outputs clock from CLKOUT{0,1,2,3} which is selected by BRG{A,B}. Now, ADG is assuming BRGA is for 44100Hz related clocks, BRGB is for 48000Hz related clocks. Clock related debug is very difficult/confusable. This patch cleanups clock related debug info. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-11ASoC: rsnd: add rsnd_kctrl_xxx() macroKuninori Morimoto4-54/+59
Current CTU/MIX/DVC are directly using rsnd_kctrl_cfg_m/s to control val etc, but it is difficult to read/understand. And there was no uniformity in access method. This patch adds new rsnd_kctrl_xxx() and implements uniformed access method. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-04ASoC: rsnd: add MIX Volume Ramp supportKuninori Morimoto3-7/+154
Both DVC/MIX have Volume Ramp Control. This patch supprts MIX Volume Ramp. One note is that main purpose of MIX Volume Ramp is to reduce noise, thus, MIX Ramp range is very few if you compare to DVC Volume Ramp (DVC = 5bit, MIX = 4bit). You can use MIX Volume Ranp like below amixer set "MIX Ramp Up Rate" "0.125 dB/1 step" amixer set "MIX Ramp Down Rate" "0.125 dB/1 step" amixer set "MIX Ramp" on aplay xxx.wav & amixer set "MIX",0 80% // DAI0 Volume Down amixer set "MIX",1 100% // DAI1 Volume Up Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>