summaryrefslogtreecommitdiff
path: root/sound/soc/sh/rcar/gen.c
AgeCommit message (Collapse)AuthorFilesLines
2014-05-13ASoC: rsnd: add DVC supportKuninori Morimoto1-0/+11
This patch adds DVC (Digital Volume Controller) support which is member of CMD unit. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-21ASoC: rsnd: add DeviceTree supportKuninori Morimoto1-0/+15
Support for loading the Renesas R-Car sound driver via DeviceTree. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05ASoC: rsnd: remove all rsnd_xxx_remove()Kuninori Morimoto1-5/+0
Now, rsnd_xxx_remove() do nothing. remove these Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04ASoC: rsnd: remove unused SSI_CONTROLKuninori Morimoto1-1/+0
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04ASoC: rsnd: run rsnd_path_init() when probe() timingKuninori Morimoto1-56/+0
Current rsnd SSIU/SSI/SCU/SRU path is set when playback/capture starts up. But it is meaningless method, since the path is based on platform and can be set in probe() timing. This patch sets the path on probe() timing. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03ASoC: rsnd: remove verbose function parameterKuninori Morimoto1-5/+2
priv has rcar_snd_info pointer. having priv and info in same time is verbose. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12ASoC: rsnd: set DIV_EN register on rsnd_adg_set_convert_clk_gen2()Kuninori Morimoto1-0/+1
DIV_EN register enable bit is required when you use Gen2 SRC Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: add Gen2 SRC and DMAEngine supportKuninori Morimoto1-0/+26
Renesas sound Gen2 has SRC (= Sampling Rate Converter) which needs 2 DMAC. The data path image when you use SRC on Gen2 is [mem] -> Audio-DMAC -> SRC -> Audio-DMAC-peri-peri -> SSIU -> SSI This patch support SRC and DMAEnine. It is tested on R-Car H2 Lager board Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: SCU should be called before SSIKuninori Morimoto1-4/+4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: fixup Gen2 module namingKuninori Morimoto1-1/+1
Gen2 has SCU, not SRU Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: tidyup register naming of BUSIF_MODEKuninori Morimoto1-1/+1
Gen1:SRU has only 1 BUSIF_MODE, but Gen2:SSIU/SCU has SRCm_BUSIF_MODE, and SSIn_BUSIF_MODE. This patch rename current BUSIF_MODE to SRC_BUSIF_MODE. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31ASoC: rsnd: add SRC (Sampling Rate Converter) supportKuninori Morimoto1-0/+10
This patch adds SRC support to Renesas sound driver. SRC converts sampling rate between codec <-> cpu. It needs special codec chip, or very simple DA/AD converter to use it. This patch was tested via ak4554 codec, and supports Gen1 only at this point. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31ASoC: rsnd: tidyup register namingKuninori Morimoto1-2/+2
Use correct register name which appears in the datasheet Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-10ASoC: rsnd: gen: fixup Gen2 channel sizeKuninori Morimoto1-2/+2
Gen2 has 0 - 9, total 10 channels, not 9 channels. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-29ASoC: rcar: add Gen2 sound supportKuninori Morimoto1-5/+86
This patch adds Gen2 sound support for Renesas R-Car. But, it is supporting PIO transfer only at this point Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-29ASoC: rcar: remove rcar_gen_opsKuninori Morimoto1-27/+6
Current rcar driver gen.c is using rcar_gen_ops which was made with the assumption that Gen1 and Gen2 need different behavior. but it was not needed. This patch removes unnecessary complex method. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-29ASoC: rcar: remove .path_init/exit from rsnd_gen_opsKuninori Morimoto1-39/+15
rsnd_gen_ops has .path_init/exit callback function which cares SRU/SSI (if Gen1) SCU/SSIU/SSI (if Gen2) path settings. But, the differences between Gen1/Gen2 are cared in ssi.c/scu.c, and the path itself is same in Gen1/Gen2. This patch removes .path_init/exit callback. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-29ASoC: rcar: add rsnd_is_accessible_reg()Kuninori Morimoto1-0/+26
Current rcar driver is supporting Gen1, and Gen2 will be supported soon. Then, some registers are used from Gen1 only, or from Gen2 only. To avoid NULL pointer access, this patch adds register accessible check function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-29ASoC: rcar: separate regmap init common fieldKuninori Morimoto1-21/+28
The repmap initialization difference between Gen1/Gen2 is only register offset. This patch separates rsnd_gen1_regmap_init() into common part and Gen1 specific part. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-29ASoC: rcar: remove unused register settingsKuninori Morimoto1-3/+0
AUDIO_CLK_SEL4/5 are not used Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-24ASoC: rsnd: use regmap instead of original register mapping methodKuninori Morimoto1-81/+143
Current Linux kernel is supporting regmap/regmap_field, and, it is good match for Renesas Sound Gen1/Gen2 register mapping. This patch uses regmap instead of original method for register access Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17ASoC: rsnd: gen: rsnd_gen_ops cares .probe and .removeKuninori Morimoto1-17/+24
Current rsnd_gen_ops didn't care about .probe and .remove functions, but it was not good sense. This patch tidyup it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06ASoC: rsnd: SSI supports DMA transfer via BUSIFKuninori Morimoto1-3/+7
This patch adds BUSIF support for R-Car sound DMAEngine transfer. The sound data will be transferred via FIFO which can cover blank time which will happen when DMA channel is switching. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06ASoC: rsnd: remove platform dai and add dai_id on platform settingKuninori Morimoto1-5/+5
Current rsnd driver is using struct rsnd_dai_platform_info so that indicate sound DAI information (playback/capture SSI ID). But, SSI settings were also required separately. Thus, platform settings was very un-understandable. This patch adds dai_id to SSI settings, and removed rsnd_dai_platform_info. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-31ASoC: rcar: fix return value check in rsnd_gen1_probe()Wei Yongjun1-13/+4
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(), and also remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-28ASoC: add Renesas R-Car SSI featureKuninori Morimoto1-2/+22
Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) As 1st protype, this patch adds SSI feature on this driver. But, it is PIO sound playback support only at this point. The DMA transfer, and capture feature will be supported in the future Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-28ASoC: add Renesas R-Car ADG featureKuninori Morimoto1-2/+18
Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) This patch adds ADG feature which controls sound clock Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-28ASoC: add Renesas R-Car SCU featureKuninori Morimoto1-0/+95
Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) This patch adds SCU feature on this driver. But, it defines SCU style only, does nothing at this point. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-28ASoC: add Renesas R-Car Generation featureKuninori Morimoto1-0/+154
Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) The main difference between Gen1 and Gen2 are 1) register offset, 2) data path In order to control Gen1/Gen2 by same method, this patch adds gen.c. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 07:51:15 +0300