summaryrefslogtreecommitdiff
path: root/sound/soc/sh/fsi.c
AgeCommit message (Collapse)AuthorFilesLines
2012-02-03ASoC: fsi: PortA/B information was controlled by sh_fsi_port_infoKuninori Morimoto1-16/+16
Current FSI got each PortA/B parameter by porta_flags/portb_flags from platform. And .set_rate function was shared for PortA/B. This structure was not readable and not flexible. This patch adds sh_fsi_port_info, and its own settings was added on each platform. it is preparation for DMAEngine support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03ASoC: fsi: fsi_stream_is_working() care substream->runtimeKuninori Morimoto1-4/+2
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03ASoC: fsi: add .start_stop handler to fsi_stream_handlerKuninori Morimoto1-22/+29
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03ASoC: fsi: don't use is_play as a parameter of fsi functionsKuninori Morimoto1-49/+45
is_play should be kept as local valuable. it prepare cleanup for DMAEngine support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03ASoC: fsi: tidyup: fsi_pio_xxx() are gatheredKuninori Morimoto1-52/+49
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03ASoC: fsi: add fsi_stream_handler and PIO handlerKuninori Morimoto1-15/+118
This patch adds struct fsi_stream_handler and defined fsi_pio_push/pop_handler. these are controled by fsi_steam_xxx() function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03ASoC: fsi: use fsi_stream in fsi_get_current_fifo_samples() parameterKuninori Morimoto1-3/+7
fsi_get_current_fifo_samples() uses fsi_stream instead of is_play. This is just prepare cleanup for DMAEngine support. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03ASoC: fsi: re-define fsi_is_play() and fsi_stream_is_play()Kuninori Morimoto1-5/+10
This patch re-define fsi_is_play() and fsi_stream_is_play(). fsi_data_pop/push() function keeps direct value of "is_play" at this point, but it will be removed soon. This is just prepare cleanup for DMAEngine support. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03ASoC: fsi: modify fsi_pio_get_area() parameter and using positionKuninori Morimoto1-26/+17
This patch modify fsi_pio_get_area() parameter to use struct fsi_stream, and used it on fsi_fifo_data_ctrl(). This is just prepare cleanup for DMAEngine support. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03ASoC: fsi: rename fsi_stream_push/pop() to fsi_stream_init/quit()Kuninori Morimoto1-4/+4
This is preparation for DMAEngine support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03ASoC: fsi: remove unnecessary parameter from fsi_hw_shutdown()Kuninori Morimoto1-4/+2
This is preparation for DMAEngine support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03ASoC: fsi: tidyup: move fsi_fifo_init() onto fsi_hw_startup()Kuninori Morimoto1-55/+54
fsi_fifo_init() is called only from fsi_hw_startup() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03ASoC: fsi: rename fsi_dma_soft_xxx() to fsi_pio_xxx()Kuninori Morimoto1-14/+14
This is preparation for DMAEngine support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03ASoC: fsi: data push/pop calculation part was dividedKuninori Morimoto1-59/+45
Next transfer data size of "push" and "pop" had calculated on shared function. But it was not readable code. This patch divided it into for push, and for pop. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03ASoC: fsi: tidyup: fsi_stream_xx() functions were gatheredKuninori Morimoto1-58/+57
This patch gathered fsi_stream_xxx() functions in order to make it readable. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03ASoC: fsi: reduce runtime calculation by using pre-settingKuninori Morimoto1-6/+5
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-31ASoC: fsi: Remove unneeded empty runtime PM callbacksMark Brown1-14/+0
The runtime PM core no longer requires any callbacks so don't provide empty ones for it any more. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-14ASoC: Use core pm_runtime callbacks for fsiMark Brown1-4/+0
Now that the core holds a pm_runtime reference to the device while the link is active there is no need for the driver to do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-25ASoC: Convert sh directory to module_platform_driverAxel Lin1-12/+1
Factor out some boilerplate code. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23ASoC: Constify snd_soc_dai_ops structsLars-Peter Clausen1-1/+1
Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure") introduced the possibility to have constant DAI ops structures, yet this is barley used in both existing drivers and also new drivers being submitted, although none of them modifies its DAI ops structure. The later is not surprising since existing drivers are often used as templates for new drivers. So this patch just constifies all existing snd_soc_dai_ops structs to eliminate the issue altogether. The patch was generated with the following coccinelle semantic patch: // <smpl> @@ identifier ops; @@ -struct snd_soc_dai_ops ops = +const struct snd_soc_dai_ops ops = { ... }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08ASoC: fsi: add valid data position control supportKuninori Morimoto1-0/+15
FSI2 can control valid data position, like package in front/back or stream mode (16bit x 2). But current fsi driver is assuming it was in-back. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08ASoC: fsi: fixup compile warningKuninori Morimoto1-3/+3
This patch fixup below warning ${linux}/sound/soc/sh/fsi.c:442:3:\ warning: passing argument 1 of '__fsi_reg_read' makes pointer\ from integer without a cast ${linux}/sound/soc/sh/fsi.c:517:3: \ warning: passing argument 1 of '__fsi_reg_write' makes pointer\ from integer without a cast ${linux}/sound/soc/sh/fsi.c:663:3: \ warning: passing argument 1 of '__fsi_reg_mask_set' makes pointer\ from integer without a cast Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-01sound: Add module.h to the previously silent sound usersPaul Gortmaker1-0/+1
Lots of sound drivers were getting module.h via the implicit presence of it in <linux/device.h> but we are going to clean that up. So fix up those users now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-27Merge branch 'topic/asoc' into for-linusTakashi Iwai1-5/+5
2011-10-03ASoC: sh: use correct __iomem annotationsArnd Bergmann1-5/+5
This removes a few unnecessary type casts and avoids sparse warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22sound: irq: Remove IRQF_DISABLEDYong Zhang1-1/+1
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-07ASoC: core - Optimise and refactor pcm_new() to pass only rtdLiam Girdwood1-3/+3
Currently pcm_new() passes in 3 arguments :- card, pcm and DAI. Refactor this to only pass in 1 argument (i.e. the rtd) since struct rtd contains card, pcm and DAI along with other members too that are useful too. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: add fsi_hw_startup/shutdownKuninori Morimoto1-14/+29
This patch is preparation of cleanup suspend/resume patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: cleanup suspend/resumeKuninori Morimoto1-55/+42
Current FSI driver was using saved_xxx variable for suspend/resume. OTOH, the start and stop of power/clock are controlled by fsi_hw_startup/fsi_hw_shutdown in current FSI driver. The all necessary registers value are set by fsi_hw_startup. So, if fsi_hw_shutdown is called when "suspend" is generated, and fsi_hw_startup is called at "resume", the saved_xxx are not needed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: remove fsi_module_init/killKuninori Morimoto1-30/+0
FSIA/B ports is enabled by default when power-on, and current FSI is supporting RuntimePM. In addition, current fsi_module_init/kill doesn't care simultaneous playback/recorde. This mean FSI port control is not needed. This patch remove fsi_module_init/kill Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: make sure fsi_stream_push/pop access by spin lockKuninori Morimoto1-0/+8
fsi_stream_push/pop might be called in same time. This patch protect it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: remove pm_runtime from fsi_dai_set_fmt.Kuninori Morimoto1-20/+32
pm_runtime_get/put_sync were used to access FSI register in fsi_dai_set_fmt which is called when ALSA probe. But this register value will disappear after pm_runtime_put_sync if platform is supporting RuntimePM. To solve this issue, this patch adds new variable for format, and remove pm_runtime_get/put_sync from fsi_dai_set_fmt. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: tidyup unclear variable namingKuninori Morimoto1-82/+100
Some variables on this driver were a unclear naming, and were different unit (byte, frame, sample). And some functions had wrong name (ex. it returned "sample width" but name was "fsi_get_frame_width"). This patch tidy-up this issue, and the minimum unit become "sample". Special thanks to Takashi YOSHII. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: irq control moves to fsi_port_start/stopKuninori Morimoto1-10/+10
Using fsi_irq_enable/disable in fsi_port_start/stop is very natural. This patch is preparation of cleanup suspend/resume patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: add fsi_set_master_clkKuninori Morimoto1-77/+87
Current FSI driver is using set_rate call back function which is for master mode. By this patch, it is used from fsi_set_master_clk. This patch is preparation of cleanup suspend/resume patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: tidyup parameter of fsi_stream_pushKuninori Morimoto1-9/+5
It is possible to create buff_len and period_len from substream->runtime. This patch is preparation of tidyup unclear variable naming patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-26ASoC: sh: fsi: Add module/port clock control functionKuninori Morimoto1-31/+50
The FIFO of each port were always working though it was not used in current FSI driver. This patch add module/port clock control function for fixing it. This patch is also caring suspend/resume. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <simon@horms.net> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-26ASoC: sh: fsi: add dev_pm_ops :: suspend/resumeKuninori Morimoto1-0/+86
Current FSI driver sets important settings when probing. And it are not set again as long as driver is not bind again. This mean FSI driver will lost it from register if suspend/resume are happen. This patch save important settings for suspend/resume. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <simon@horms.net> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-26ASoC: sh: fsi: add fsi_is_clk_master functionKuninori Morimoto1-8/+25
If FSI port is clock master, it use set_rate function which is callback from platform, and it is not necessary to call it if FSI port is clock slave. Current FSI driver called this callback if platform provide it. This patch modify it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <simon@horms.net> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-18ASoC: add a module alias to the FSI driverGuennadi Liakhovetski1-0/+1
This patch enables FSI driver autoloading on sh-mobile systems. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Simon Horman <horms@verge.net.au Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-12ASoC: fsi: driver safely remove for against irqKuninori Morimoto1-4/+3
free_irq and pm_runtime_disable should be called before snd_soc_unregister_xxx Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-12ASoC: fsi: modify vague PM control on probeKuninori Morimoto1-1/+2
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-12ASoC: fsi: take care in failing case of dai registerKuninori Morimoto1-1/+10
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-26ASoC: sh: fsi: modify selection method of I2S/PCM/SPDIF formatKuninori Morimoto1-51/+55
Current format selection of FSI-codecs depended on platform information for FSI, and chip default settings for codecs. It is not understandable/formal method. This patch modify FSI and FSI-codecs to use snd_soc_dai_set_fmt. But FSI can use I2S/PCM and SPDIF format today. It can be selected to I2S/PCM by snd_soc_dai_set_fmt, but can not select SPDIF. So, this patch change FSI platform information to have DAI/SPDIF mode. If platform selects DAI mode (default), FSI-codecs can select I2S/PCM by snd_soc_dai_set_fmt, and if it is SPDIF mode, FSI become SPDIF format. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-26ASoC: sh: fsi: free from NULL pointer of struct sh_fsi_platform_infoKuninori Morimoto1-4/+17
Current FSI driver assumed master->info is not NULL. This patch allow NULL in master->info Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-26ASoC: sh: fsi: move chan_num from fsi_stream to fsi_privKuninori Morimoto1-19/+15
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-21ASoC: sh: fsi: Add snd_soc_dai_set_fmt supportKuninori Morimoto1-23/+31
This patch add snd_soc_dai_ops :: set_fmt to FSI driver and select master/slave clock mode by snd_soc_dai_set_fmt on fsi-xxx.c instead of platform infomation code. This patch remove fsi_is_master function which is no longer needed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-21ASoC: sh: fsi: Add fsi_get_priv_frm_dai functionKuninori Morimoto1-2/+6
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-17ASoC: sh: fsi: Add over/under run counterKuninori Morimoto1-27/+49
Current FSI driver had printed under/over run error if status register have its error bit. But runtime print cause the next error because print out is slow. This patch add error counter and print error when sound stop Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-17ASoC: sh: fsi: move fsi_irq_enable function to fsi_dai_triggerKuninori Morimoto1-3/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 01:34:46 +0300