summaryrefslogtreecommitdiff
path: root/sound/soc/samsung/speyside.c
AgeCommit message (Collapse)AuthorFilesLines
2023-10-26ASoC: samsung: speyside: Handle component name prefixKrzysztof Kozlowski1-2/+2
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231023095428.166563-17-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-09-25ASoC: samsung: convert not to use asoc_xxx()Kuninori Morimoto1-4/+4
ASoC is now unified asoc_xxx() into snd_soc_xxx(). This patch convert asoc_xxx() to snd_soc_xxx(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87fs3kqnhi.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-04-05ASoC: samsung: switch to use c2c_params instead of paramsKuninori Morimoto1-1/+2
ASoC is now using c2c_params instead of params. This patch replace it. num_c2c_params (was num_params) was not mandatory before, but let's set it by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87jzytc2kp.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-14ASoC: soc-card: Create jack kcontrol without pinsAkihiko Odaki1-4/+6
snd_soc_card_jack_new() allowed to create jack kcontrol without pins, but did not create kcontrols. The jack would not have kcontrols if pins were not going to be added. This renames the old snd_soc_card_jack_new() to snd_soc_card_jack_new_pins() for use when pins are provided or will be added later. The new snd_soc_card_jack_new() appropriately creates a jack for use without pins and adds a kcontrol. Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Link: https://lore.kernel.org/r/20220408041114.6024-1-akihiko.odaki@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-05ASoC: samsung: Constify snd_soc_dapm_{route,widget} structsRikard Falkeborn1-2/+2
These structs only have their address assigned to the dapm_{routes,widget} fields in the snd_soc_card struct, both which are pointers to const data. Make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220330204227.25081-1-rikard.falkeborn@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-12-20ASoC: samsung: Use dev_err_probe() helperKuninori Morimoto1-3/+2
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20211214020843.2225831-21-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27ASoC: samsung: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto1-4/+4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87ftdzir57.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-28ASoC: samsung: Silence warnings during deferred probeMarek Szyprowski1-1/+1
Don't confuse user with meaningless warning about the failure in getting resources and registering card in case of deferred probe. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200228101120.28819-1-m.szyprowski@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-16ASoC: samsung: speyside: use snd_soc_dai_link_component for codec_confKuninori Morimoto1-1/+1
We can use snd_soc_dai_link_component to specify codec_conf. Let's use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/874ky559in.wl-kuninori.morimoto.gx@renesas.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-10ASoC: soc-core: find rtd via dai_link pointer at snd_soc_get_pcm_runtime()Kuninori Morimoto1-2/+2
Current snd_soc_get_pcm_runtime() is finding rtd by checking dai_link name. But, it is strange and waste of CPU power, because its user want to get from rtd from dai_link, not from dai_link name. This patch find rtd via dai_link pointer instead of its name. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87a781yq67.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-09ASoC: samsung: speyside: use snd_soc_dai_link_component for aux_devKuninori Morimoto1-2/+1
We can use snd_soc_dai_link_component to specify aux_dev. Let's use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/87mugk6w9l.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-06ASoC: samsung: speyside: use modern dai_link styleKuninori Morimoto1-10/+16
ASoC is now supporting modern style dai_link (= snd_soc_dai_link_component) for CPU/Codec/Platform. This patch switches to use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-19ASoC: samsung: speyside: Convert to SPDX License IdentifierSylwester Nawrocki1-10/+5
Replace GPL v2.0+ license statements with SPDX license identifier. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12ASoC: wm8996: replace codec to componentKuninori Morimoto1-7/+5
Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-18ASoC: Vendor drivers get a link's runtime by snd_soc_get_pcm_runtime()Mengdong Lin1-2/+10
Vendor drivers no longer access a DAI link's runtime by the link index but by matching the link name via snd_soc_get_pcm_runtime(). We assume each DAI link has a unique name. This is preparation for changing runtimes from an array to a list later. Vendor drivers changed: sound/soc/fsl/fsl-asoc-card.c sound/soc/fsl/imx-wm8962.c sound/soc/pxa/mioa701_wm9713.c sound/soc/samsung/bells.c sound/soc/samsung/littlemill.c sound/soc/samsung/odroidx2_max98090.c sound/soc/samsung/snow.c sound/soc/samsung/speyside.c sound/soc/samsung/tobermory.c sound/soc/tegra/tegra_wm8903 Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-04ASoC: speyside: Use snd_soc_codec_get_dapm()Lars-Peter Clausen1-1/+1
The dapm field of the snd_soc_codec struct is eventually going to be removed. Replace direct access to it with snd_soc_codec_get_dapm(), which will return the DAPM context for the CODEC. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-04ASoC: speyside: Register jacks at the card levelLars-Peter Clausen1-10/+4
The jacks are card level elements so use snd_soc_card_jack_new() instead of snd_soc_jack_new() to register them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20ASoC: samsung: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-08-19ASoC: Pass component instead of DAPM context to AUX dev init callbackLars-Peter Clausen1-2/+4
Given that the component is the containing structure it makes more sense to pass the component rather than the DAPM context to the AUX dev init callback. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-22ASoC: samsung: Use devm_snd_soc_register_cardTushar Behera1-15/+3
Replace snd_soc_register_card with devm_snd_soc_register_card. With this change, we can delete the empty remove functions. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2012-12-09ASoC: Samsung: remove __dev* attributesBill Pemberton1-3/+3
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-07ASoC: Samsung: Do not register samsung audio dma device as pdevPadmavathi Venna1-1/+1
Previously, the ASoC 'platform' (PCM/DMA) object was instantiated via a platform_device. This didn't represent the hardware well, since there was no separate hardware associated with this platform_device; it was a virtual device with sole purpose to call snd_soc_register_platform(). This change removes the platform_device completely. Each Samsung DAI now registers the ASoC 'platform' itself. Machine drivers are adjusted for the new 'platform' name. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-25ASoC: samsung: Add hookup of WM0010 on SpeysideMark Brown1-5/+37
The Speyside platform by default has a WM0010 fitted. Now that we have a public driver hook it up in the machine integration. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-16ASoC: Use dai_fmt in SpeysideMark Brown1-29/+4
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-22ASoC: samsung: Add .owner to struct snd_soc_cardAxel Lin1-0/+1
Missed .owner of struct snd_soc_card will prevent the module from being removed from underneath its users. Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-12ASoC: Raise Speyside audio system clock rate to 512fsMark Brown1-3/+4
To support advanced system functionality for additional components; the actively used clocks will remain the same for current components. Also factor the rate out to a single #define while we're at it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-27Merge branch 'for-3.2' into for-3.3Mark Brown1-1/+1
2011-11-27ASoC: Correct name of Speyside Main Speaker widgetMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-25ASoC: Convert Samsung directory to module_platform_driverMark Brown1-11/+1
Saves some boilerplate code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com>
2011-11-24ASoC: Add fully_routed flag to Speyside machinesMark Brown1-2/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-01sound: Add module.h to the previously silent sound usersPaul Gortmaker1-0/+1
Lots of sound drivers were getting module.h via the implicit presence of it in <linux/device.h> but we are going to clean that up. So fix up those users now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-19ASoC: Add line loads to the list of supported detections for SpeysideMark Brown1-1/+2
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-31ASoC: Allow source specification for CODEC level sysclkMark Brown1-1/+1
Similarly to PLLs/FLLs some modern CODECs provide selectable system clock sources. When the clock is the clock for a DAI we do not usually need to identify which clock is being configured so can use clk_id for the source clock but with CODEC wide system clocks we will need to specify both the clock being configured and the source. Add a source argument to the CODEC driver set_sysclk() operation to reflect this. As this operation is not as widely used as the DAI set_sysclk() operation the change is not very invasive. We probably ought to go and make the same alternation for DAIs at some point. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-12ASoC: Allow userspace control of Speyside headphone outputMark Brown1-4/+1
In order to facilitate the widest range of use cases (especially things like speakerphone) allow the headphone output to be enabled and disabled by the application layer. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-08ASoC: Rename WM8915 to WM8996Mark Brown1-16/+16
For marketing reasons the part will be called WM8996. In order to avoid user confusion rename the driver to reflect this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-08ASoC: Fix mismerge of Speyside set_bias_level_post()Mark Brown1-0/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-07ASoC: Manage Speyside system clocking only in bias managementMark Brown1-10/+40
Now that the CODEC driver supports it defer configuration of the system clock until bias management which is a much more idiomatic place to do system power control and makes things a lot more happy when we're using both interfaces. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-07ASoC: Add context parameter to card DAPM callbacksMark Brown1-0/+4
The card callback will get called for each DAPM context in the card so it can be useful for it to know which device is currently undergoing a transition. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-01ASoC: Update speyside audio driver for hardware revision 2Mark Brown1-4/+4
Revision 2 of the Speyside platform supplies a 32kHz clock on MCLK2 rather than MCLK1. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-28ASoC: Don't specify the DMA driver for Speyside baseband linkMark Brown1-1/+0
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Mark Speyside widgets as ignoring suspendMark Brown1-0/+16
Allow audio paths through the Speyside system to be kept active while the system is suspended (for example, when on a voice call) by marking all the external widgets and the DAI link to the WM1250-EV1 baseband module as ignoring suspend. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Add stub baseband link on SpeysideMark Brown1-0/+11
Demonstrate the connection of a baseband to the system. We add a DAI for the link to the baseband. This will become visible to the application layer - audio should be started from the application layer using an application such as this: http://opensource.wolfsonmicro.com/~gg/bluetooth-pcm/bluetooth_pcm.c which starts up audio as for CPU based playback and record up to the point where data is streamed. Due to non-availability of baseband simulation hardware we reuse the configuration for the CPU link with the CODEC acting as clock master, allowing signals to be observed with a scope. A more standard system would have separate configuration for the baseband with its own ops structure and operations. Normally the baseband would be clock master as the baseband audio will be synchronised to the external telephony network. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Add pin switches for fixed analogue inputs and outputs on SpeysideMark Brown1-0/+8
Pin switches enable direct control of the DAPM state from userspace, enabling simple enabling and disabling of the path. This is especially useful for outputs such as the speaker which are composed of several physical devices as it allows them to be controlled as a group. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Add Speyside headset jack detection supportMark Brown1-1/+77
Speyside makes use of support the WM8915 has for detecting the polarity of the microphone and ground connections on headsets, using a GPIO to control the polarity of the ground connection and switching between the two microphone bias supplies available on the device in order to do so. As a result of this the detection support is more involved than for most other CODECs, using a callback to configure the current polarity of the jack and translate this into the board-specific connections required for the current scenario. On Android some additional work is required to hook this up to the application layer as the Android HeadsetObserver monitors a custom drivers/switch API rather than the standard Linux APIs. This can be done by either updating HeadsetObserver or modifying the ALSA core to report via drivers/switch as well. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Support the sub speaker driver on SpeysideMark Brown1-0/+34
Speyside includes a WM9081 configured as an external speaker driver taking an analogue input from HPOUT2 on the WM8915 on the system. Add support for this to the driver, using a prefix of "Sub" for the WM9081 controls to ensure we avoid collisions with controls on the WM8915. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Optimise clock management for WM8915 SpeysideMark Brown1-0/+37
Dynamically enable and disable the FLL on the WM8915, configuring the system clock to 256fs for 48kHz when the device is active but reverting to using the input 32.768kHz clock directly at other times to support features such as jack detection with minimal power consumption. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Add basic widgets for WM8915 SpeysideMark Brown1-0/+28
Provide widgets for the basic widgets connected directly to the WM8915 on Speyside - the headphones, speaker, digital and analogue microphones. For the outputs this is just documentation, for the inputs this ensures that the relevant microphone biases are enabled when they are in use. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Initial audio support for Speyside on Cragganmore 6410Mark Brown1-0/+123
This is minimal code required to get audio out of the Speyside audio subsystem on the Wolfson Cragganmore 6410 reference platform. It sets up the link between the CPU and AIF1 of the WM8915 on the system, enabling audio playback via the headphone and speaker outputs of the device (which require no further configuration except runtime). It allows verification of basic functionality of the system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 01:30:39 +0300