summaryrefslogtreecommitdiff
path: root/sound/soc/intel/skylake/skl-topology.h
AgeCommit message (Collapse)AuthorFilesLines
2018-08-01Merge branch 'topic/drm_audio_component' of ↵Mark Brown1-3/+3
https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-4.19
2018-06-28ALSA: hdac: Remove usage of struct hdac_ext_bus and use hdac_bus insteadRakesh Ughreja1-3/+3
This patch removes the hdac_ext_bus structure. The legacy and enhanced HDaudio capabilities can be handled in a backward-compatible way without separate definitions. Follow-up patches in this series handle the driver definition. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-18ASoC: topology: Give more data to clients via callbacksLiam Girdwood1-2/+3
Give topology clients more access to the topology data by passing index, pcm, link_config and dai_driver to clients. This allows clients to fully instantiate and track topology objects. The SOF driver is the first user of these new APIs and needs them to build component topology driver and FW objects. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-01ASoC: topology: Move skl-tplg-interface.h to uapiGuenter Roeck1-1/+1
skl-tplg-interface.h describes firmware format details for Skylake topology files. It is part of the ABI and should reside in the uapi directory. While moving the file, also replace the license boilerplate with the SPDX License Identifier. No functional change. Signed-off-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-18ASoC: topology: Fix build errorsMark Brown1-5/+15
The two commits: 81e9b0a07889 ASoC: topology: Give more data to clients via callbacks 28aa6f7779f7 ASoC: topology: Add callback for DAPM route load/unload break the build so revert them. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-17ASoC: topology: Give more data to clients via callbacksLiam Girdwood1-15/+5
Give topology clients more access to the topology data by passing index, pcm, link_config and dai_driver to clients. This allows clients to fully instantiate and track topology objects. The SOF driver is the first user of these new APIs and needs them to build component topology driver and FW objects. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-01Merge branch 'topic/component-platform' of ↵Mark Brown1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2018-03-01ASoC: Intel: Skylake: Find module id from UUID for bind paramsSriram Periyasamy1-1/+12
Module id is a property of firmware manifest and can vary across platforms. So use the uuid to find module id dynamically for bind params like kpb post bind params. Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12ASoC: intel: skylake: replace platform to componentKuninori Morimoto1-1/+1
Now platform can be replaced to component, let's do it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: "Kp, Jeeja" <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-11Merge remote-tracking branch 'asoc/topic/intel' into asoc-nextMark Brown1-2/+5
2017-11-08ASoC: Intel: Skylake: Add channel map in updown mixer module IPCGuneshwor Singh1-0/+1
DSP expects channel map to be sent in the IPC for updown mixer module. So add ch_map info in updown mixer module config. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-08ASoC: Intel: Skylake: Fix updown mixer module formatGuneshwor Singh1-1/+1
DSP expects length of the coefficient for updown mixer module to be 8. So fix the max coefficient length and since we are using default values for coefficient select which is zero, we need not explicitly initialize it. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-13ASoC: Intel: Skylake: Add dai load ops for dais from topologyGuneshwor Singh1-0/+3
Since FE dais can come from topology, add dai_load ops for the dais from topology. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-09ASoC: Intel: Skylake: Modify skl_dsp_set_dma_control API argumentsJaikrishna Nemallapudi1-2/+2
Set dma control ipc can be used to set the M/N divider, enable the clks. It takes different payload for different configuration. So modify the skl_dsp_set_dma_control API to take the size and node_id as argument. Signed-off-by: Jaikrishna Nemallapudi <jaikrishnax.nemallapudi@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-01ASoC: Intel: Skylake: Add IPC to configure the copier secondary pinsPradeep Tewani1-0/+5
Copier can support upto 4 output pins. However, only pin 0 is configured as a part of copier initialization. Configuring rest of pins require the separate IPC to be sent to fw. Signed-off-by: Pradeep Tewani <pradeep.d.tewani@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-25ASoC: Intel: Skylake: Update module id in pin connectionsJeeja KP1-0/+1
Each module's id comes from the topology and gets updated in the driver. This patch updates the input and output pin connections of each module by matching the uuid for each module. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-25ASoC: Intel: Skylake: Parse and update module config structureRamesh Babu1-0/+25
A dsp path and the modules in the path can support various pcm configurations. The list of supported pcm configurations from topology manifest would be stored and later selected runtime based on the hw pcm params. For legacy, module data is filled in the 0th index of resource and interface table. To accommodate both models, change the relevant structures and populate them by parsing newly defined tokens. This change is backward compatible with the existing model where driver computes the resources required by each dsp module. Signed-off-by: Ramesh Babu <ramesh.babu@intel.com> Signed-off-by: Shreyas NC <shreyas.nc@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-25ASoC: Intel: Skylake: Add driver structures to be filled from topology manifestShreyas NC1-0/+52
The topology manifest would include module common data including resource and interface table. The resource table consists of resources required by the dsp module such as buffer size, cycles per second, number of input/output pins. And, the interface table consists of pcm parameters per module which can be referenced later. So define the structures accordingly to represent topology manifest data in the driver. Signed-off-by: Shreyas NC <shreyas.nc@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-19ASoC: Intel: Skylake: Add deep buffer supportRamesh Babu1-0/+1
With this patch, the dma buffer size is fetched from topology binary. This buffer size is applicable for gateway copier modules. Now that we can configure DSP dma buffer size, the device can support deep buffer playback. DSP fetches large buffer and can result fewer wakes, which helps in power reduction. Signed-off-by: Ramesh Babu <ramesh.babu@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-06ASoC: Intel: Skylake: Add enum control for mic selectionDharageswari R1-0/+20
User may prefer to select data from particular mics. A mic-select module in DSP allows this selection. Create possible enum controls to allow user to select a combination of mics to capture data from. Based on the user selection, parameters are generated and passed to mic-select module during init. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-12ASoC: Intel: Skylake: Add support for deferred DSP module bindJeeja KP1-0/+6
Module at the end of DSP pipeline that needs to be connected to a module in another pipeline are represented as a PGA(leaf node) and in PGA event handler these modules are bound/unbounded. Modules other than PGA leaf can be connected directly or via switch to a module in another pipeline. Example: reference path. To support the deferred DSP module bind, following changes are done: o When the path is enabled, the destination module that needs to be bound may not be initialized. If the module is not initialized, add these modules in a deferred bind list. o When the destination module is initialized, check for these modules in deferred bind list. If found, bind them. o When the destination module is deleted, Unbind the modules. o When the source module is deleted, remove the entry from the deferred bind list. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29ASoC: Intel: Skylake: Rearrangement of code to cleanup SKL SST libraryJeeja KP1-13/+0
Skylake driver topology header/driver structure is referenced and used in SST library which creates circular dependency. Hence the rearrangement. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29ASoC: Intel: Skylake: Use the sig_bits to define dai bps capabilityJeeja KP1-0/+2
For calculating the HDA DMA format, use the max_bps supported by the DAI caps instead of fixing it to 32/24. For host DMA the Max bps support is 32, but in case of link DMA, this depends on the codec capability. So use the sig_bits to define the bps supported by dai. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-06ASoC: Intel: Skylake: Clean up manifest infoJeeja KP1-0/+13
Instead of passing the topology manifest info directly to IPC library, define the manifest info in topology and use this in IPC Library. This will remove the dependency on topology interface definition with IPC library. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-15ASoC: Intel: Skylake: Add helper function to setup host/link dmaJeeja KP1-0/+4
This patch adds helper function to configure the host/link DMA when the DMA is in decoupled mode. Next patch adds the usage of this helper routines for configuring DMA in Mixer event handler. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-15ASoC: Intel: Skylake: Update link_index and format in pipe paramsJeeja KP1-0/+2
To configure Host/Link DMA, additionally link index and format are required based on the hw params. So added these parameters in the pipe params and in hw_params the pipe params are updated. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-25ASoC: Intel: Skylake: Removed the unused I2S blob structureGuruprasadX Pawse1-17/+0
Now that I2S conflig blob structure is no longer in use, remove it. Signed-off-by: GuruprasadX Pawse <guruprasadx.pawse@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-03ASoC: Intel: Skylake: Add D0i3 mode ref countingVinod Koul1-0/+3
For device opened/closed, we check the D0i3 capability for the device and invoke skl_tplg_d0i3_get/put, which counts the use case based on the mode supported. These counters are then used to decide if the device can enter D0i3 mode of streaming or non-streaming or no D0i3. Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-03ASoC: Intel: Skylake: Add support for specifying D0i3 configurationVinod Koul1-0/+7
Not all use cases can support Doi3. Only certain use cases like hot word detection, deep buffering can support D0i3 based on resource requirement. So, pass the D0i3 capability for the FE/BE copier using topology. This will be used to take a decision for D0i3 mode entry/exit. Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-03ASoC: Intel: Skylake: Add support for LPModeVinod Koul1-0/+1
For D0i3, we need to tell DSP to run the pipelines in LP mode. This information is kept in topology and passed to driver as an attribute for pipe. So add a new tuple for lpmode and program the pipe based on value set. Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-24ASoC: Intel: Skylake: Update to use instance ids generatedDharageswari R1-0/+10
Post bind parameters of KPB module contains the instance id's of neighbouring modules in the sink path Now that module instance ids are generated dynamically we need to update these parameters as well, so use the table created and update the ids Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-24ASoC: Intel: Skylake: Add module instance id generation APIsDharageswari R1-0/+1
Driver needs to send unique module instance id to firmware while creating the module and uses this id to communicate with DSP for setting parameters while audio use case is ongoing. But, we have upper bound of instance ID. The current IDs are coming from topology but it doesn't know the upper bound and can't assign unique id's subject to upper bounds as we can create a big graph but not all parts running at same time. This patch adds a 128bit unique id management routines which are built on top of ffz() for faster implementation. Unfortunately ffz() works on 32bits values, so additional code is added on top of ffz() to create a 128bit unique id. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01ASoC: Intel: Skylake: Fix DMA control config sizeJeeja KP1-1/+1
DMA control IPC structure wrong config array length, So corrected the size Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: Intel: Skylake: Move modules query to runtimeVinod Koul1-1/+1
Since we are moving DSP init to later, at the topology load the module info is not available. So set the module id to -1 at init and query at first module initialization. Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-25Merge remote-tracking branch 'asoc/topic/intel' into asoc-nextMark Brown1-1/+5
2016-07-08ASoC: Intel: Skylake: Fix to use the actual size for TLV controlDharageswari R1-0/+1
DSP expects the actual length of parameters that is set through TLV to be passed in large config set, so pass the actual size received in tlv_control_set() instead of max size. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07ASoC: Intel: Skylake: Set the DSP pipe typeJeeja KP1-0/+1
DSP pipe type can be a pass through or it can be processing pipe. In case of pass through pipe, it is a single pipeline with both host and link copier in the same pipeline. Identify the DSP pipe type if it pass through or not. Pass through pipe is identified by checking if it has both host and link copier in the same pipeline. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07ASoC: Intel: Skylake: Reset DSP pipe when host/link DMA is resetJeeja KP1-1/+4
In case of XRUN recovery PCM prepare will be called. In this case Host/Link DMAs are reset and reconfigured, hence the corresponding FE/BE pipe needs to be reset in order to get to a clean state. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-02Merge tag 'asoc-fix-v4.6-rc5' into asoc-intelMark Brown1-4/+4
ASoC: Fixes for v4.6 This is a fairly large collection of fixes but almost all driver specific ones, especially to the new Intel drivers which have had a lot of recent development. The one core fix is a change to the debugfs code to avoid crashes in some relatively unusual configurations.
2016-04-21ASoC: Intel: Skylake: Use UUID in binary formatShreyas NC1-1/+1
To avoid complex string manipulations with UUID in canonical form, use UUID in binary format. Signed-off-by: Shreyas NC <shreyas.nc@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-28ASoC: Intel: Skylake: Fix for unloading module only when it is loadedJeeja KP1-4/+4
Module needs to be unloaded only when it is loaded successfully. To fix this, first correct the module state sequence and set module state to LOADED if module is loaded successfully. When unloading the module check if module state is not in UNINIT, then unload it. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-08ASoC: Intel: Skylake: Add MCLK configurationDharageswari.R1-0/+25
The SoC has MCLK output which is typically required by codecs. The MCLK is controlled by DSP FW, so driver can configure that by sending DMA_CONTROL IPC. The configuration for MCLK is present in the endpoint blob. So if block has this configuration, send IPC to DSP for MCLK configuration. This is done by new function skl_dsp_set_dma_control() which is invoked by BE prepare. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-08ASoC: Intel: Skylake: Add skl_tplg_be_get_cpr_module() helperDharageswari.R1-0/+2
An I2S port can be connected to multiple BE pipes, get module config only for the active BE pipe. This helpers helps to do that and is used in subsequent patches Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08ASoC: Intel: Skylake: read params from DSP if module is onOmair M Abdullah1-0/+2
If a module is ON then we should read the module parameters from DSP rather than driver cached values Signed-off-by: Omair M Abdullah <omair.m.abdullah@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08ASoC: Intel: Skylake: Fix module init data correctlyJeeja KP1-2/+2
Module initialization parameter data can be set by - INIT_INSTANCE IPC by using the default value - SET_PARAMS immediately after INIT_INSTANCE - SET_PARAMS data from kcontrol values set this patch add param type to identify the parameters has to be sent to DSP. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08ASoC: Intel: Skylake: Add support for Mic Select moduleDharageswari R1-0/+5
Mic select is a DSP module which is used to select one or many inputs to form an output. This is useful to select data selectively from PDM input and hence the name. This module is of generic module type. This patch adds support to add and configure Mic select module in firmware topology. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08ASoC: Intel: Skylake: Add memory pages to widget data.Jeeja KP1-0/+1
A module can require extra memory for processing, like audio algorithms. The memory for these modules needs to be represented in base module configuration and passed to DSP on init, so add the memory pages as a field in widget data Signed-off-by: Dharageswari.R <dharageswari.r@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-02ASoC: Intel: Skylake: Add support to configure module paramsJeeja KP1-0/+9
This adds support to configure module parameter during module initialization or after module init using set module param required by the DSP firmware sequence. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-02ASoC: Intel: Skylake: Add helper routine to handle Algo parameterJeeja KP1-0/+5
Some DSP modules has user configurable parameters, which are required by some modules at module initialization. To configure the module algorithm parameter during initialization we add helpers here Signed-off-by: Divya Prakash <divya1.prakash@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-02ASoC: Intel: Skylake: Add helper routines to handle module paramsJeeja KP1-2/+4
Some DSP modules have user configurable parameters. These parameters are required by modules in the following scenario - during initialization - after initialization using set parameter This patch adds helper routine to set module parameters using large config set IPC message and removes params to be passed as init module routine. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-03 20:33:37 +0300