| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add a new quirk SOF_RT5682S_HEADPHONE_CODEC_PRESENT to support
ALC5682I-VS headphone codec which driver is a new one, rt5682s, with
new macros and functions.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210914101847.778688-2-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SoundWire BEs make use of 'stream' functions for .prepare and
.trigger. These functions will in turn force a Bank Switch, which
implies a wait operation.
Mark SoundWire BEs as nonatomic for consistency, but keep all other
types of BEs as is. The initialization of .nonatomic is done outside
of the create_sdw_dailink helper to avoid adding more parameters to
deal with a single exception to the rule that BEs are atomic.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210907184436.33152-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH is enabled without
CONFIG_EXPERT, there is a Kconfig warning about unmet dependencies:
WARNING: unmet direct dependencies detected for SND_SOC_SDW_MOCKUP
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] &&
EXPERT [=n] && SOUNDWIRE [=y]
Selected by [y]:
- SND_SOC_INTEL_SOUNDWIRE_SOF_MACH [=y] && ...
Selecting a symbol does not account for dependencies. There are three
ways to resolve this:
1. Make CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH select
CONFIG_SND_SOC_SDW_MOCKUP only if CONFIG_EXPERT is set.
2. Make CONFIG_SND_SOC_SDW_MOCKUP's prompt depend on CONFIG_EXPERT so
that it can be selected by options that only depend on
CONFIG_SOUNDWIRE but still appear as a prompt to the user when
CONFIG_EXPERT is set.
3. Make CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH imply
CONFIG_SND_SOC_SDW_MOCKUP, which will select
CONFIG_SND_SOC_SDW_MOCKUP when its dependencies are enabled but still
allow the user to disable it.
Go with the third option as it gives the most flexibility while
retaining the original intent of the select.
Fixes: 0ccac3bcf356 ("ASoC: Intel: boards: sof_sdw: add SoundWire mockup codecs for tests")
Suggested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210902181217.2958966-1-nathan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Marking the two jack gpio as static fixes the following Sparse errors:
sound/soc/intel/boards/bytcr_rt5640.c:468:26: error: symbol 'rt5640_jack_gpio' was not declared. Should it be static?
sound/soc/intel/boards/bytcr_rt5640.c:475:26: error: symbol 'rt5640_jack2_gpio' was not declared. Should it be static?
Fixes: 9ba00856686ad ("ASoC: Intel: bytcr_rt5640: Add support for HP Elite Pad 1000G2 jack-detect")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210825122519.3364-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rojewski <cezary.rojewski@intel.com>:
Existing skylake-driver supports very basic scenarios with limited range
of modules and their control. Attached changes first fix code as several
advanced configurations are 'mentioned' throughout the files but are not
actually functional. Follow up are changes adding missing support for
said configurations.
Cezary Rojewski (5):
ASoC: Intel: kbl_da7219_max98927: Fix format selection for max98373
ASoC: Intel: Skylake: Leave data as is when invoking TLV IPCs
ASoC: Intel: Skylake: Fix module resource and format selection
ASoC: Intel: Skylake: Fix module configuration for KPB and MIXER
ASoC: Intel: Skylake: Select first entry for singular pipe config
arrays
Gustaw Lewandowski (2):
ASoC: Intel: Skylake: Fix passing loadable flag for module
ASoC: Intel: Skylake: Simplify m_state for loadable modules
Kareem Shaik (1):
ASoC: Intel: Skylake: Support multiple format configs
Pawel Harlozinski (1):
ASoC: Intel: Skylake: Properly configure modules with generic
extension
Piotr Maziarz (1):
ASoC: Intel: Skylake: Select proper format for NHLT blob
Szymon Mielczarek (1):
ASoC: Intel: Skylake: Support modules with generic extension
include/uapi/sound/snd_sst_tokens.h | 6 +-
sound/soc/intel/boards/kbl_da7219_max98927.c | 55 +------
sound/soc/intel/skylake/skl-messages.c | 155 ++++++++++++-------
sound/soc/intel/skylake/skl-pcm.c | 25 ++-
sound/soc/intel/skylake/skl-topology.c | 155 +++++++++++--------
sound/soc/intel/skylake/skl-topology.h | 26 +++-
6 files changed, 231 insertions(+), 191 deletions(-)
--
2.25.1
|
|
The byt_rt5640_hp_elitepad_1000g2_jack?_check functions are only
used inside bytcr_rt5640.c, mark them as static.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210823110432.64860-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Contrary to what is said in board's file, topology targeting
kbl_da7219_max98373 expects format 16b, not 24/32b. Partially revert
changes added in 'ASoC: Intel: Boards: Add Maxim98373 support' to bring
old behavior back, aligning with topology expectations.
Fixes: 716d53cc7837 ("ASoC: Intel: Boards: Add Maxim98373 support")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The HP Elitepad 1000 G2 tablet has 2 headset jacks:
1. on the dock which uses the output of the codecs built-in HP-amp +
the standard IN2 input which is always used with the headset-jack.
2. on the tablet itself, this uses the line-out of the codec + an external
HP-amp, which gets enabled by the ALC5642 codec's GPIO1 pin; and IN1 for
the headset-mic.
The codec's GPIO1 is also its only IRQ output pin, so this means that
the codec's IRQ cannot be used on this tablet. Instead the jack-detect
is connected directly to GPIOs on the main SoC. The dock has a helper
chip which also detects if a headset-mic is present or not, so there
are 2 GPIOs for the jack-detect status of the dock. The tablet jack
uses a single GPIO which indicates if a jack is present or not.
Differentiating between headphones vs a headset on the tablet jack
is done by using the usual mic-bias over-current-detection mechanism.
Add support for this unique setup, this support gets enabled on this
tablet through a new BYT_RT5640_JD_HP_ELITEP_1000G2 quirk.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213415
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210819190543.784415-7-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
mic on the 2nd jack
In order to be able to do jack-detection reporting for the
mic contact on the 2nd jack found on some devices, the
DAPM topology needs to have a separate DAPM pin/input for that
microphone, instead of re-using the "Internal Mic" pin which is
normally used together with the IN1P input of the codec.
Using the "Internal Mic" dapm-pin-switch for this in a snd_soc_jack_pin to
report hotplug events causes the "Internal Mic" pin to get deactivated
when unplugging a headset from the 2nd jack, thus turning off the actual
Internal Mic (typically a pair of digital mics on devices with 2 jacks).
Fixes: 79c1123bac3b ("ASoC: Intel: bytcr_rt5640: Add support for a second headset mic input")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210819190543.784415-6-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use "cfg-lineout:2" in the components string on boards with a lineout
instead of "cfg-lineout:1", this better mirrors the speaker part of
the components string where we use "cfg-spk:1" for devices with a single
speaker and "cfg-spk:2" for stereo speakers.
The lineout is stereo by default, so using ":2" makes more sense, this
way we keep ":1" reserved in case we ever encounter a device with
a mono lineout.
We can make this change without breaking userspace because no kernel
has shipped with "cfg-lineout:1" in the component-string yet; and there
also are no userspace bits (UCM profiles) checking for this yet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210816114722.107363-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function device_add_properties() is going to be removed.
Replacing it with software node API equivalents.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Prepare the transition to the software node API by removing device
properties in the probe error handling and .remove callback.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function device_add_properties() is going to be removed.
Replacing it with software node API equivalents.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Co-developed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Follow the example of Intel Atom drivers and keep a reference to the
headset codec until the properties are removed.
There is no guarantee that the module for the codec driver is loaded
before the machine driver probe, the use of the deferred probe
mechanism is required.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If we want to handle a context in init/exit function, we have to pass
the card information. This will be necessary to better deal with
device properties in the follow-up commits.
No functional change other than prototype update.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have an existing 'adev' handle from which we can find the codec
device, no need for an I2C bus search.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
acpi_dev_get_first_match_dev() searches for an acpi_handle
instantiated by the ACPI table scanning done early during boot.
Two of three machine drivers using this search don't deal with errors
and the one which does (bytcr_rt5651) returns -ENODEV, which doesn't
make sense here: an alternate driver will not be probed.
Add consistent error handling and report -ENXIO.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In current ACPI-based devices, the DSDT does not include any of the
properties required by the codec driver. This is not an ACPI
limitation proper since the _DSD method could be used, as done for
Camera and SoundWire in newer platforms. For legacy devices, there is
unfortunately no other option than using a work-around: we add
properties to the codec device from the machine driver.
To avoid any issues with the codec driver being unbound, we need to
keep a reference to the codec device until the card is removed.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
No need to initialize a variable if the next line overwrites the value.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210802152151.15832-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The default SOF topology enables SSP capture and DMICs, even though
both of these hardware capabilities are not always available in
hardware (specific versions of HiFiberry and DMIC kit needed).
For the SSP capture, this leads to annoying "SP5-Codec: ASoC: no
backend capture" and "streamSSP5-Codec: ASoC: no users capture at
close - state 0" errors.
Update the quirks to match what the topology needs, which also allows
for the ability to remove SSP capture and DMIC support.
BugLink: https://github.com/thesofproject/linux/issues/3061
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210802152151.15832-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
DMI product name is used to support system variants based on
adl_mx98373_rt5682 in current implementation. Replace this DMI search with
DMI_OEM_STRING and coreboot(BIOS used in these systems) is
setting the needed DMI_OEM_STRING field to uniquely identify these
systems.
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: jairaj arava <jairaj.arava@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210802152151.15832-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This device has the same audio subsystem as the 0A5E skew (RT711
headset codec, 2 RT1308 amps and RT715 for mic capture)
BugLink: https://github.com/thesofproject/linux/issues/3057
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: FRED OH <fred.oh@intel.com>
Link: https://lore.kernel.org/r/20210802152151.15832-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The HP Elitepad 1000 G2 has 2 headset jacks:
1. on the dock which uses the output of the codecs built-in HP-amp +
the standard IN2 input which is always used with the headset-jack.
2. on the tablet itself, this uses the line-out of the codec, combined
with an external HP-amp + IN1 for the headset-mic.
Fix the HP ElitePad 1000 G2 to properly reflect this now that the
machine-driver supports this setup.
Note this also changes the mapping for the internal mic. from
IN1 (which was pointing to the 2nd headset-jack mic) to DMIC2
which is the actual input for the internal mics.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213415
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210802142501.991985-7-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some devices (HP Elitepad 1000 G2) have 2 headset jacks (1 on the dock,
2nd on the tablet itself). The 2nd headset mic input on these is
connected to in1 (the internal mics on the HP Elitepad 1000 G2 use DMIC2).
Add support for this through a new BYT_RT5640_HSMIC2_ON_IN1 quirk.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210802142501.991985-6-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some devices (HP Elitepad 1000 G2) have a second headphones output
(1 on the dock, 2nd on the tablet itself) which is implemented through
the line-out output of the codec combined with an external hp-amp
which gets enabled through the codec's GPIO1 pin.
Add support for this through a new BYT_RT5640_LINEOUT_AS_HP2 quirk,
note users are expected to use this combined with the
BYT_RT5640_LINEOUT quirk. If that quirk is not set the new quirk is
ignored.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210802142501.991985-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a byt_rt5640_get_codec_dai() helper, which gets the codec_dai
from a dapm_context.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210802142501.991985-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for boards which use the codecs Line Out output, this can
be enabled by using the newly added BYT_RT5640_LINEOUT quirk.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210802142501.991985-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
matching in-/output
Move the "Platform Clock" routes for the "Internal Mic" and "Speaker"
routes to the intmic_*_map[] / *_spk_map[] arrays.
This ensures that these "Platform Clock" routes do not get added when the
BYT_RT5640_NO_INTERNAL_MIC_MAP / BYT_RT5640_NO_SPEAKERS quirks are used.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210802142501.991985-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The default codec for speaker amp's DAI Link is max98373 and will be
overwritten in probe function if the board id is sof_da7219_mx98360a.
However, the probe function does not do it because the board id is
changed in earlier commit.
Fixes: 1cc04d195dc2 ("ASoC: Intel: sof_da7219_max98373: shrink platform_id below 20 characters")
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210726094525.5748-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The same quirk is used for LAPBC510 and LAPBC710 skews who use the
same audio design, with an RT711 headset codec using JD1 mode and one
RT1308 amplifier, along with 4 DMICs.
BugLink: https://github.com/thesofproject/linux/issues/3049
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210719233248.557923-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
<yung-chuan.liao@linux.intel.com>:
Adding mockup SoundWire codec is useful to debug driver/topology changes
without having any actual device connected.
Bard Liao (2):
soundwire: stream: don't abort bank switch on Command_Ignored/-ENODATA
soundwire: stream: don't program mockup device ports
Pierre-Louis Bossart (8):
ASoC: codecs: add SoundWire mockup device support
ASoC: soc-acpi: cnl: add table for SoundWire mockup devices
ASoC: soc-acpi: tgl: add table for SoundWire mockup devices
ASoC: Intel: boards: sof_sdw: add SoundWire mockup codecs for tests
soundwire: add flag to ignore all command/control for mockup devices
soundwire: bus: squelch error returned by mockup devices
soundwire: cadence: add debugfs interface for PDI loopbacks
soundwire: cadence: override PDI configurations to create loopback
drivers/soundwire/bus.c | 10 +-
drivers/soundwire/cadence_master.c | 174 ++++++++--
drivers/soundwire/cadence_master.h | 3 +
drivers/soundwire/stream.c | 5 +-
include/linux/soundwire/sdw.h | 3 +
sound/soc/codecs/Kconfig | 18 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/sdw-mockup.c | 312 ++++++++++++++++++
sound/soc/intel/boards/Kconfig | 1 +
sound/soc/intel/boards/sof_sdw.c | 41 +++
sound/soc/intel/common/Makefile | 3 +-
.../intel/common/soc-acpi-intel-cnl-match.c | 15 +
.../common/soc-acpi-intel-sdw-mockup-match.c | 166 ++++++++++
.../common/soc-acpi-intel-sdw-mockup-match.h | 17 +
.../intel/common/soc-acpi-intel-tgl-match.c | 23 ++
15 files changed, 754 insertions(+), 39 deletions(-)
create mode 100644 sound/soc/codecs/sdw-mockup.c
create mode 100644 sound/soc/intel/common/soc-acpi-intel-sdw-mockup-match.c
create mode 100644 sound/soc/intel/common/soc-acpi-intel-sdw-mockup-match.h
base-commit: e73f0f0ee7541171d89f2e2491130c7771ba58d3
--
2.17.1
|
|
Add support for SoundWire mockup devices. The configurations assume the
same topology as the CML SoundWire devices and can be used to test the
SOF firmware on a development board (RVP, UpExtreme) without any
hardware connected.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210714032209.11284-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ADL RVP uses different circuits for jack detection, hence
adding external resister 100k mode.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: jairaj arava <jairaj.arava@intel.com>
Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210712203240.46960-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We don't need to redefine enum rt711_jd_src.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210712203240.46960-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
commit 683b0df26c33 ("ASoC: rt711: add two jack detection modes")
added two jack detection modes. Rt711 has 4 JD modes now.
Reserve 4 bits in case rt711 adds more JD modes in the future.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210712203240.46960-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Refactor the machine driver by using the common code in maxim-common
module to support max98360a.
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210712203240.46960-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds driver data for jsl_cs4242_mx98360a which supports two
max98360a speaker amplifiers on SSP1 and cs42l42 headphone codec on
SSP0 running on JSL platform.
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210712203240.46960-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move max98360a code to this common module so it could be shared
between multiple SOF machine drivers. MAX98357A and MAX98360A are
sharing same codec driver so here we also share some function and
structures.
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210712203240.46960-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently there are two types of DAI Link sequences defined in
topology files, one starts from speaker link and the other starts from
headphone link.
Type 1: SPK - HP - DMIC - HDMI
Type 2: HP - DMIC - HDMI - SPK
Here we add a macro SOF_CS42L42_DAILINK to define the DAI Link
sequence in quirk and refactor the sof_card_dai_links_create()
function to support arbitrary DAI Link sequence.
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210712203240.46960-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use sof_dai_get_bclk() function to get bclk frequency instead of a
hard-coded magic number depending on configuration in topology.
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210625205042.65181-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big set of char / misc and other driver subsystem updates
for 5.14-rc1. Included in here are:
- habanalabs driver updates
- fsl-mc driver updates
- comedi driver updates
- fpga driver updates
- extcon driver updates
- interconnect driver updates
- mei driver updates
- nvmem driver updates
- phy driver updates
- pnp driver updates
- soundwire driver updates
- lots of other tiny driver updates for char and misc drivers
This is looking more and more like the "various driver subsystems
mushed together" tree...
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
mcb: Use DEFINE_RES_MEM() helper macro and fix the end address
PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable
bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls
bus: mhi: Wait for M2 state during system resume
bus: mhi: core: Fix power down latency
intel_th: Wait until port is in reset before programming it
intel_th: msu: Make contiguous buffers uncached
intel_th: Remove an unused exit point from intel_th_remove()
stm class: Spelling fix
nitro_enclaves: Set Bus Master for the NE PCI device
misc: ibmasm: Modify matricies to matrices
misc: vmw_vmci: return the correct errno code
siox: Simplify error handling via dev_err_probe()
fpga: machxo2-spi: Address warning about unused variable
lkdtm/heap: Add init_on_alloc tests
selftests/lkdtm: Enable various testable CONFIGs
lkdtm: Add CONFIG hints in errors where possible
lkdtm: Enable DOUBLE_FAULT on all architectures
lkdtm/heap: Add vmalloc linear overflow test
lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE
...
|
|
On TGL platform with max98373 codec the trigger start sequence is
fe first, then codec component and sdw link is the last. Recently
a delay was introduced in max98373 codec driver and this resulted
to the start of sdw stream transmission was delayed and the data
transmitted by fw can't be consumed by sdw controller, so xrun happened.
Adding delay in trigger function is a bad idea. This patch enable spk
pin in prepare function and disable it in hw_free to avoid xrun issue
caused by delay in trigger.
Fixes: 3a27875e91fb ("ASoC: max98373: Added 30ms turn on/off time delay")
BugLink: https://github.com/thesofproject/sof/issues/4066
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210625205042.65181-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Kconfig documentation for SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH
is a bit misleading as it refers to a set of older platforms,
while in practise this machine driver supports all modern
Intel systems with Smart Sound Technology based DSP and HDA codecs.
Modify the Kconfig text to reflect current state.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210621194057.21711-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When we have a platform_device_id table, we can use
MODULE_DEVICE_TABLE to automatically generate the modalias. As a
result we can remove the manual insertion of MODULE_ALIAS.
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210621194057.21711-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sparse throws the following warning:
sound/soc/intel/boards/sof_sdw.c:796:31: error: incorrect type in argument 6 (different signedness)
sound/soc/intel/boards/sof_sdw.c:796:31: expected int *group_id
sound/soc/intel/boards/sof_sdw.c:796:31: got unsigned int *
The group_id cannot be negative, use unsigned int.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210621194057.21711-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sparse throws the following warning:
sound/soc/intel/boards/sof_da7219_max98373.c:438:25: error: too long
initializer-string for array of char(no space for nul char)
Fix by using 'mx' acronym for Maxim.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210621194057.21711-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sparse throws the following warnings:
sound/soc/intel/boards/kbl_da7219_max98357a.c:647:25: error: too long
initializer-string for array of char(no space for nul char)
Fix by using the 'mx' acronym for Maxim.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210621194057.21711-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sparse throws the following warning:
sound/soc/intel/boards/glk_rt5682_max98357a.c:622:25: error: too long
initializer-string for array of char(no space for nul char)
Fix by using the 'mx' acronym for Maxim
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210621194057.21711-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
