summaryrefslogtreecommitdiff
path: root/sound/soc/intel/boards
AgeCommit message (Collapse)AuthorFilesLines
2016-08-15ASoC: Intel: bytcr_rt5640: log quirksPierre-Louis Bossart1-0/+30
use dev_info to provide better support for autodetection and DMI-based quirks, no functional changes Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15ASoC: Intel: bytcr_rt5640: Add quirk for Teclast X98 Air 3G tabletPierre-Louis Bossart1-0/+10
Add DMI-based quirk, routing from SSP0 to AIF1 is not very usual Suggested-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15AsoC: Intel: Add quirks for MinnowBoard MAXIrina Tirdea1-0/+9
I2S MCLK has been routed to LSE connector on the MinnowBoard starting with HW version 3. Older versions of the board do not have MCLK wired. Add dmi quirk to disable MCLK for MinnowBoard MAX (v2). Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15ASoC: Intel: bytcr_rt5640: add MCLK supportIrina Tirdea1-15/+172
Use platform clocks "pmc_plt_clk_3" when MCLK quirk is defined. By default always enable the 19.2 MHz PLL. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15ASoC: Intel: bytcr_rt5640: add IN3 mapPierre-Louis Bossart1-0/+10
Some platforms have the analog mic connected to IN3, add route accordingly Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15ASoC: Intel: bytcr_rt5640: default routing and quirks on Baytrail-CRPierre-Louis Bossart1-1/+31
Auto routing based on Baytrail/Baytrail-CR detection Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15ASoC: Intel: bytcr_rt5640: fix dai/clock setup for SSP0 routingPierre-Louis Bossart1-28/+64
SSP0 uses 16 bits 2ch, SSP2 24 bits 2ch Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15ASoC: Intel: bytcr_rt56040: additional routing quirksPierre-Louis Bossart1-2/+42
Allow for all possible combinations of SSP0,SSP2, AIF1, AIF2 combination (only one at a time) Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15ASoC: Intel: bytcr_rt5640: add SSP2_AIF2 routingPierre-Louis Bossart1-8/+46
Add quirk to model routing on Baytrail-CR devices Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15ASoC: Intel: bytcr_rt5640: enable differential mic quirkPierre-Louis Bossart1-1/+8
Some Baytrail-CR devices rely on analog mics connected with differential pairs and not the single-ended default Add quirk and enable it for T00TAF Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15ASoC: Intel: bytcr_rt5640: quirk for mono speakerPierre-Louis Bossart1-5/+28
Some Baytrail devices only have a mono speaker, add quirk and enable it for T100TAF. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15ASoC: Intel: bytcr-rt5640: add Asus T100TAF quirksPierre-Louis Bossart1-6/+14
Add quirk based on DMI string matching Also fix matching to use DMI_EXACT_MATCH otherwise T100TA and T100TAF will be using same quirk Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: Intel: board: add kabylake nau88l25_ssm4567 machine idVinod Koul1-0/+8
Like SKL we have skl_nau88l25_ssm4567 machine for KBL, so add the ID for this machine too. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: Intel: board: add kabylake nau88l25_max98357a machine idVinod Koul1-0/+8
Like SKL we have skl_nau88l25_max98357a machine for KBL, so add the ID for this machine too. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: Intel: Skylake: reduce machine name for skl_nau88l25_max98357aVinod Koul1-2/+2
The platform device id table expects names to be less that 20chars, so truncate the name in skl id table and skl_nau88l25_max98357a machine. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14ASoC: Intel: Skylake: reduce machine name for skl_nau88l25_ssm4567Vinod Koul1-2/+2
The platform device id table expects names to be less that 20chars, so truncate the name in skl id table and skl_nau88l25_ssm4567 machine. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-12ASoC: Intel: board: add kabylake machine idVinod Koul1-0/+9
Kabylake platform is similar to Skylake. So, add machine id. Since same machine driver supports both, add these in id table. Signed-off-by: Shreyas NC <shreyas.nc@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-08ASoC: Intel: cht: fix uninit variable warningVinod Koul1-1/+1
Kbuild bot reports that we might use dai_index uninitialized. sound/soc/intel/boards/cht_bsw_rt5645.c:391:37: warning: 'dai_index' may be used uninitialized in this function [-Wmaybe-uninitialized] Since it is theoretically possible, set it while initializing. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-08ASoC: Intel: Add surface3 entry in CHT-RT5645 machineVinod Koul1-1/+19
Surface3 device is a CHT machine, so add entry for it. Also update the HID from BIOS. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98001 Signed-off-by: Sachin Mokashi <sachinx.mokashi@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-22ASoC: Intel: Skylake: Add pm ops for broxton-rt298 machineVinod Koul1-0/+1
Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-22ASoC: Intel: Revert "ASoC: Intel: Add support for PM ops in bxt-rt298"Vinod Koul1-23/+0
This reverts commit 3513798ca4bc ("ASoC: Intel: Add support for PM ops in bxt-rt298") as the right way to fix this is to disable async suspend Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-14ASoC: Intel: Add support for PM ops in bxt-rt298Jeeja KP1-0/+23
We need card to be early suspended and late resumed, so use prepare and complete for card suspend and resume. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-14ASoC: Intel: Update ignore suspend for bxt-rt298Senthilnathan Veppur1-0/+15
Capture from DMIC requires that we ignore the suspend, so mark these as ignore_suspend in bxt-rt298 machine. Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-14ASoC: Intel: Add FE rate & channel constraints for bxt-rt298Senthilnathan Veppur1-0/+36
We support stereo 48Khz audio, so add these as constraints for this card Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-14ASoC: Intel: Add DMIC 4 channel support for bxt machineSenthilnathan Veppur1-0/+66
Like Skylake, we can support 4 channel for DMIC, so add hw_params and constraints in the bxt-rt298 machine While at it, also add codec1 pipe for speaker playback. Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-01ASoC: Intel: Add Broxton-P Dialog Maxim machine driverSathyanarayana Nujella2-0/+462
This patch adds Broxton-P I2S machine driver which uses DA7219 and MAX98357A codecs. Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-31ASoC: Intel: boards: configure DMIC for machine sklnau8825maxYong Zhi1-3/+22
This machine driver can support 2 or 4 DMIC configuration, so apply the ch constraint according to driver pdata. Signed-off-by: Yong Zhi <yong.zhi@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-31ASoC: Intel: boards: configure DMIC for machine sklnau8825adiYong Zhi1-3/+22
This machine driver can support 2 or 4 DMIC configuration, so apply the ch constraint according to driver pdata. Signed-off-by: Yong Zhi <yong.zhi@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-30ASoC: Intel: Skylake: Use refcap device for mono recordingYong Zhi1-0/+14
Only mono channel is allowed for refcap device. Signed-off-by: Yong Zhi <yong.zhi@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-30ASoC: Intel: Skylake: Add channel constraints for refcapYong Zhi1-0/+14
Add constraint for ref DMIC to match with the topology firmware config. Signed-off-by: Yong Zhi <yong.zhi@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-19Merge tag 'sound-4.7-rc1' of ↵Linus Torvalds12-34/+567
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This time was again a relatively calm development cycle; most of updates are about drivers, and no radical changes are seen in any core code. Here are some highlights: ALSA core: - Continued hardening of ALSA hrtimer - A few leak fixes in timer interface - Fix poll error handling in PCM and compress - Add error propagation in compress API - Removal of dead rtctimer driver HD-audio: - Native ELD notify support for i915 HDMI - Realtek ALC234 & co support - Code refactoring to standardize chmap support - Continued development for SKL HDMI core support Firewire: - Apply delayed card registration to all drivers - Improved / stabilized the handling of PCM stream start / stop - Add tracepoints to dump a part of isochronous packet data - Fixed incoming/outgoing packet parameter usages - Add support for M-Audio profire series USB-audio: - Fixes for UAC2 clock source - SS+ support - Workaround for oft-seen repeated sample rate read errors ASoC: - Further slow progress on the topology code - Substantial updates and improvements for the da7219, es8328, fsl-ssi, Intel and rcar drivers. - Compress error handling in WM ADSP driver" * tag 'sound-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (177 commits) ALSA: firewire-lib: change a member of event structure to suppress sparse wanings to bool type sound: oss: Use setup_timer and mod_timer. ASoC: hdac_hdmi: Remove the unused 'timeout' variable ASoC: fsl_ssi: Fix channel slipping on capture (or playback) restart in full duplex. ASoC: fsl_ssi: Fix channel slipping in Playback at startup ASoC: fsl_ssi: Fix samples being dropped at Playback startup ASoC: fsl_ssi: Save a dev reference for dev_err() purpose. ASoC: fsl_ssi: The IPG/5 limitation concerns the bitclk, not the sysclk. ASoC: fsl_ssi: Real hardware channels max number is 32 ASoC: pcm5102a: Add support for PCM5102A codec ASoC: hdac_hdmi: add link management ASoC: Intel: Skylake: add link management ALSA: hdac: add link pm and ref counting ALSA: au88x0: Fix zero clear of stream->resources ASoC: rt298: Add DMI match for Broxton-P reference platform ASoC: rt298: fix null deref on acpi driver data ASoC: dapm: deprecate MICBIAS widget type ALSA: firewire-lib: drop skip argument from helper functions to queue a packet ALSA: firewire-lib: add context information to tracepoints ALSA: firewire-lib: permit to flush queued packets only in process context for better PCM period granularity ...
2016-05-13Merge remote-tracking branch 'asoc/topic/hdmi' into asoc-nextMark Brown3-7/+188
2016-05-11ASoC: Intel: fix up for DAI link's be_id changeStephen Rothwell1-5/+5
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-11Merge branch 'topic/dai-link' of ↵Mark Brown10-24/+24
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2016-05-10ASoC: Intel: Add Broxton-P machine driverRamesh Babu2-0/+355
This patch adds the Broxton-P machine driver for Intel Broxton-P reference boards. This machine uses the RT298 codec Signed-off-by: Ramesh Babu <ramesh.babu@intel.com> Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-02ASoC: Intel: Boards: remove ignore_suspend for WoV streamsJeeja KP3-3/+0
On WoV we can suspend the DMA and keep the DSP pipelines only On, so remove the ignore_suspend for WoV streams but keep them for WoV endpoints. This helps in achieving better power by suspending DMAs Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-28ASoC: Intel: boards: Update skl_nau88l25_ssm4567 driver to support chmapSubhransu S. Prusty1-3/+70
HDMI registers channel map controls per PCM. As PCMs are not registered during dai_link init callback, store the pcm ids and codec DAIs during this init callback. Register for late probe and call the jack_init API which also registers channel map in the late probe callback handler. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-28ASoC: Intel: boards: Update skl_nau88l25_max98357a driver to support chmapSubhransu S. Prusty1-3/+71
HDMI registers channel map controls per PCM. As PCMs are not registered during dai_link init callback, store the pcm ids and codec DAIs during this init callback. Register for late probe and call the jack_init API which also registers channel map in the late probe callback handler. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-28ASoC: skl_rt286: Fix to support hdmi channel map supportSubhransu S. Prusty1-1/+47
HDMI registers channel map controls per PCM. As PCMs are not registered during dai_link init callback, store the pcm ids and codec DAIs during this init callback. Register for late probe and call the jack_init API which also registers channel map in the late probe callback handler. The patch following the machine driver changes adds the channel map control in the hdac_hdmi codec driver. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-20ASoC: Change DAI link's be_id to a generic idMengdong Lin10-24/+24
The generic ID can be used by topology: - Toplogy can create FE links and set their ID, machine drivers will be notified and check this ID for machine-specific init. - Toplogy can use the ID to find existing BE & CC links and further configure them. Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-09ACPI / utils: Rename acpi_dev_present()Lukas Wunner2-2/+2
acpi_dev_present() was originally named after pci_dev_present() to signify the similarity of the two functions. However Rafael J. Wysocki pointed out that the exported function acpi_dev_present() is easily confused with the non-exported acpi_device_is_present(). Additionally in ACPI parlance the term "present" usually refers to the "device is present" bit returned by the _STA control method, yet acpi_dev_present() merely checks presence in the namespace. It does not invoke _STA at all, let alone check the "device is present" bit. As suggested by Rafael, rename the function to acpi_dev_found() and adjust all existing call sites. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-13Merge remote-tracking branch 'asoc/topic/intel' into asoc-nextMark Brown6-89/+371
2016-03-05Merge remote-tracking branch 'asoc/fix/intel' into asoc-linusMark Brown2-9/+13
2016-03-05ASoC: Intel: bytcr_rt5640: use HID translation utilPierre-Louis Bossart1-3/+19
Remove hard-coded generation of codec name, use translation routine to avoid issues with codec name not matching what the ACPI subsystem registered Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-05ASoC: Intel: bytcr_rt5640: change quirk positionPierre-Louis Bossart1-13/+15
No added functionality Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-02ASoC: Intel: Skylake: remove IVI codec loop in skl_nau88l25_ssm4567 machineJeeja KP1-18/+0
The IVI loop is removed in skl_nau88l25_ssm4567 machine as we enable this path thru DAPM graph using the PCM device and not thru loop Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-02ASoC: Intel: Skylake: Add IVI feedback path in nau88125_ssm4567 machineJeeja KP1-0/+3
We can enable the IVI feedback path by connecting Left/Right speaker sensors (codec) to ssp0 Rx (soc-dsp). This way aDSP gets feedback data from codec to DSP algorithms Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-01ASoC: intel: mfld: Fix enum ctl accesses in a wrong typeTakashi Iwai1-8/+8
"Playback Switch" and "Lineout Mux" ctls in medfld machine driver are enum, while the current driver accesses wrongly via value.integer.value[]. They have to be via value.enumerated.item[] instead. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-26ASoC: cht_bsw_rt5645: Fix writing to string literalCarlo Caione1-1/+5
We cannot use strcpy() to write to a const char * location. This is causing a 'BUG: unable to handle kernel paging request' error at boot when using the cht-bsw-rt5645 driver. With this patch we also fix a wrong indexing in the driver where the codec_name of the wrong dai_link is being overwritten. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-24ASoC: Intel: boards: Remove WoV sink in nau88125_max98357a machineJeeja KP1-3/+0
WoV module needs to be triggered with PCM open, so remove this as DAPM Sink and will be connected to FE Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 01:38:35 +0300