| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
We have many set_bias_level functions, thus dapm->bias_level should be
handled by owner function, not by its callback functions.
|
|
snd_soc_component_set_bias_level() (A) which will call .set_bias_level()
callback (B) will be called from snd_soc_dapm_force_bias_level() (C) only,
and it sets dapm->bias_level (D) inside. No need to set it by each driver.
Remove it.
(A) int snd_soc_component_set_bias_level(...)
{
...
if (component->driver->set_bias_level)
(B) ret = component->driver->set_bias_level(...);
...
}
(C) int snd_soc_dapm_force_bias_level(...)
{
...
if (dapm->component)
(A) ret = snd_soc_component_set_bias_level(...);
if (ret == 0)
(D) dapm->bias_level = level;
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87plebmmax.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_component_set_bias_level() (A) which will call .set_bias_level()
callback (B) will be called from snd_soc_dapm_force_bias_level() (C) only,
and it sets dapm->bias_level (D) inside. No need to set it by each driver.
Remove it.
(A) int snd_soc_component_set_bias_level(...)
{
...
if (component->driver->set_bias_level)
(B) ret = component->driver->set_bias_level(...);
...
}
(C) int snd_soc_dapm_force_bias_level(...)
{
...
if (dapm->component)
(A) ret = snd_soc_component_set_bias_level(...);
if (ret == 0)
(D) dapm->bias_level = level;
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87qzyrmmb2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
This is prepare to hiding snd_soc_dapm_context inside soc-dapm.c
|
|
Merge series from Sakari Ailus <sakari.ailus@linux.intel.com>:
Late last year I posted a set to switch to __pm_runtime_mark_last_busy()
and gradually get rid of explicit pm_runtime_mark_last_busy() calls in
drivers, embedding them in the appropriate pm_runtime_*autosuspend*()
calls. The overall feedback I got at the time was that this is an
unnecessary intermediate step, and removing the
pm_runtime_mark_last_busy() calls can be done after adding them to the
relevant Runtime PM autosuspend related functions.
|
|
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20250704075456.3222642-1-sakari.ailus@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://patch.msgid.link/20250703183523.2075276-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Return an error from driver probe if the DEVID read from the chip is not
one supported by this driver.
In cs35l56_hw_init() there is a check for valid DEVID, but the invalid
case was returning the value of ret. At this point in the code ret == 0
so the caller would think that cs35l56_hw_init() was successful.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 84851aa055c8 ("ASoC: cs35l56: Move part of cs35l56_init() to shared library")
Link: https://patch.msgid.link/20250703102521.54204-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add calibration functionality to the aw88399 chip.
When the chip is in calibration condition, calibration
can be achieved by configuring the chip's internal DSP
and save the calibration values in cali_re.
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://patch.msgid.link/20250627110306.23488-1-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Current Kconfig menu at [ALSA for SoC audio support] has no rules.
So, some venders are using menu style, some venders are listed each drivers
on top page, etc. It is difficult to find target vender and/or drivers
because it is very random.
Let's standardize ASoC menu, like below
--- ALSA for SoC audio support
Analog Devices --->
AMD --->
Apple --->
Atmel --->
Au1x ----
Broadcom --->
Cirrus Logic --->
DesignWare --->
Freescale --->
Google --->
Hisilicon --->
...
One concern is *vender folder* alphabetical order vs *vender name*
alphabetical order were different. For example "sunxi" menu is
"Allwinner".
Link: https://lore.kernel.org/r/8734c8bf3l.wl-kuninori.morimoto.gx@renesas.com
|
|
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Minor cleanup while preparing for adding WCD9378 support: do not use
enum for values which are not an enumeration.
|
|
Fix the boost gain calculation error in rt721_sdca_set_gain_get.
This patch is specific for "FU33 Boost Volume".
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/1b18fcde41c64d6fa85451d523c0434a@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In some cases, the sysclk won't be configured on init, and sysclk can be
changed in hw_params() according to different sample rate, for example,
for 44kHz sample rate, the sysclk is 11.2896MHz, for 48kHz sample rate,
the sysclk is 12.288MHz.
In order to support the above case, only enable constraints when sysclk
is configured, and check the rate in hw_params.
So overall there are three cases that need to be considered:
- call set_sysclk() on init, then constraints will be initialized.
- don't call set_sysclk() on init, but call it after startup(), then
constraints will be configured, the constraints can be cleared with
call set_sysclk() again in shutdown().
- don't call set_sysclk() in the whole flow, then there are no any
constraints. The clocks depend on cpu dai.
Enlarge the WM8524_NUM_RATES to 12, as the supported rate range is 8kHz
to 192kHz.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250620021403.624303-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We currently log parse failures for ELD data and some disconnection events
as errors without rate limiting. These log messages can be triggered very
frequently in some situations, especially ELD parsing when there is nothing
connected to a HDMI port which will generate:
hdmi-audio-codec hdmi-audio-codec.1.auto: HDMI: Unknown ELD version 0
While there's doubtless work that could be done on reducing the number of
connection notification callbacks it's possible these may be legitimately
generated by poor quality physical connections so let's use rate limiting
to mitigate the log spam for the parse errors and lower the severity for
disconnect logging to debug level.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250613-asoc-hdmi-eld-logging-v1-1-76d64154d969@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace hard-coded register values with defines for checking major and
minor versions of device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250616-asoc-wcd93xx-enum-v1-4-a20a1b538509@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The value used to identify chip variant is not an enumeration, but raw
value used to compare registers with. The 'enum' is not used in the
code at all, so simplify and make it a raw hex value define, so
intention will be explicit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250616-asoc-wcd93xx-enum-v1-3-a20a1b538509@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The value used to identify chip variant is not an enumeration, but raw
value used to compare registers with. The 'enum' is not used in the
code at all, so simplify and make it a raw hex value define, so
intention will be explicit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250616-asoc-wcd93xx-enum-v1-2-a20a1b538509@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The value used to identify chip variant is not an enumeration, but raw
value used to compare registers with. The 'enum' is not used in the
code at all, so simplify and make it a raw hex value define, so
intention will be explicit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250616-asoc-wcd93xx-enum-v1-1-a20a1b538509@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use SND_JACK_AVOUT as the mask to align with hdac_hdmi driver so that we
can determine HDMI/DP devices from event type.
Most drivers that uses hdmi-codec driver will not be affected since they
are creating jacks with SND_JACK_LINEOUT mask. They will still report
SND_JACK_LINEOUT when the jack status is updated with
snd_soc_jack_report.
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Link: https://patch.msgid.link/20250613-hdmi-v1-1-665ba7ecd5e7@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move the include linux/debugfs.h into tas2781.h for code clean.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250612044252.1025-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the SoundWire link number and device unique ID as the firmware file
qualifier suffix on CS35L56 B0 if .bin files are not found with the older
suffix. Some changes in wm_adsp needed to support this have been included
in this patch because they are trivial.
The allows future products with CS35L56 B0 silicon to use the same firmware
file naming as CS35L57 and cs35L63, while retaining backward compatibility
for firmware that has already been published with the old naming scheme.
The old suffix is searched first, partly because there are already many
files using that naming scheme, but also because they are a smaller subset
of all the possible fallback name options offered by wm_adsp so we know
that it will either find the qualified files or fail. All the firmware
files already published have the wmfw qualified with only the ACPI SSID and
the bin files qualified with both SSID and the suffix.
Originally, the firmware file names indicated which amplifier instance they
were for by appending the ALSA prefix string. This is the standard ASoC way
of distinguishing different instances of the same device. However, on
SoundWire systems the SoundWire physical unique address is available as a
unique identifier for each amp, and this address is hardwired by the
address pin on the amp.
The firmware files are specific for each physical amp so they must be
applied to that amp. Using the ALSA prefix for the filename qualifier means
that to name a firmware file it must be determined what prefix string the
machine driver will assign to each device and then use that to name the
firmware file correctly. This is straightforward in traditional ASoC
systems where the machine driver is specific to a particular piece of
hardware. But on SoundWire the machine driver is generic and can handle a
very wide range of hardware. It is more difficult to determine exactly what
the prefix will be on any particular production device, and more prone to
mistakes. Also, when the machine driver switches to generating this
automatically from SDCA properties in ACPI, there is an additional layer of
complexity in determining the mapping. This uncertainty is unnecessary
because the firmware is built for a specific amp. with known address, so we
can use that directly instead of introducing a redundant intermediate
alias. This ensures the firmware is applied to the amp it was intended for.
There are already many published firmware for CS35L56 B0 silicon so this
first looks for the original name suffix, to keep backward compatibility.
If this doesn't find .bin files it will switch to using the new name suffix
so that future products using CS35L56 B0 can start to use the new suffix.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250612121428.1667-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the SoundWire link number and device unique ID as the firmware file
qualifier suffix on CS35L57, CS35L63 and revisions of CS35L56 after B0. The
change in wm_adsp needed to support this has been included in this patch
because it is fairly trivial.
Originally, the firmware file names indicated which amplifier instance they
were for by appending the ALSA prefix string. This is the standard ASoC way
of distinguishing different instances of the same device. However, on
SoundWire systems the SoundWire physical unique address is available as a
unique identifier for each amp, and this address is hardwired by a pin on
the amp.
The firmware files are specific for each physical amp so they must be
applied to that amp. Using the ALSA prefix for the filename qualifier means
that to name a firmware file it must be determined what prefix string the
machine driver will assign to each device and then use that to name the
firmware file correctly. This is straightforward in traditional ASoC
systems where the machine driver is specific to a particular piece of
hardware. But on SoundWire the machine driver is generic and can handle a
very wide range of hardware. It is more difficult to determine exactly what
the prefix will be on any particular production device, and more prone to
mistakes. Also, when the machine driver switches to generating this
automatically from SDCA properties in ACPI, there is an additional layer of
complexity in determining the mapping. This uncertainty is unnecessary
because the firmware is built for a specific amp. with known address, so we
can use that directly instead of introducing the redundant intermediate
alias. This ensures the firmware is applied to the amp it was intended for.
There have not been any firmwares published for CS35L57 or CS35L63, so
these can safely be switched to using the SoundWire unique address as the
suffix string. Also note that the machine driver in older kernel version
only has match entries for the CS35L56 Soundwire identity so any future
product with a cs35L57 or CS35L63 would require a new kernel anyway.
There are already many published firmware for CS35L56 B0 silicon so this
keeps the original naming scheme on those, to preserve backward
compatibility.
Note that although sdw_slave.id contains a unique_id field, this cannot
be trusted because the SoundWire core code also puts magic values into it
that it uses as a flag. So the unique ID is read from the chip register.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250612121428.1667-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Make static data const for code safety and drop some unused fields in
structs.
|
|
Now the SoundWire IRQ lock has been changed in the core, it is no longer
necessary to use a bunch of work functions to dodge mutex inversions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250609143041.495049-4-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Merge series from cy_huang@richtek.com:
This patch series adds Richtek RTQ9124 1x30W audio amplifier support.
|
|
Merge series from Bram Vlerick <bram.vlerick@openpixelsystems.org>:
Add support for the ti,tas5753 to tas571x driver.
|
|
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Small set of patches intoducing two low-impact improvements to rt5640
codec driver and then avs_rt5640 machine board driver. The board
behavior is based on existing boards such as avs_rt274.
In regard to the retry-device-verification change, there is number of
similar "fixes" found in the Realtek code in sound/soc/codecs. What I
provide here is verified with tests, the delay is not mentioned in the
spec I have access to.
|
|
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Make the WCD93xx codec drivers simpler using
devm_regulator_bulk_get_enable() and obtain missing VDD_PX supply on
wcd939x.
Context depends on fixes:
https://lore.kernel.org/r/20250526-b4-b4-asoc-wcd9395-vdd-px-fixes-v1-0-0b8a2993b7d3@linaro.org
|
|
Add codecs driver for Richtek RTQ9124.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/aca49d1912bfd1b90e82146df6393760a731810c.1749454717.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The unnecessary symbols for imply are SND_SOC_TAS2781_COMLIB,
SND_SOC_TAS2781_COMLIB_I2C, and SND_SOC_TAS2781_FMWLIB. They all used for
library compiling. All the symbols in the imply are used for codec driver
compiling.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250523131111.1884-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No one is using hdac_hdmi_jack[_port]_init(). Remove it and its
related functions.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87o6v3j73q.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All four Qualcomm SoC macro codecs define DAI IDs in an enum starting
with AIF_INVALID=0, which is nowhere used in the code thus actual DAI
IDs start from 1. Drivers do not have their own of_xlate_dai_name(),
thus snd_soc_get_dlc() expects the DTS to start numbering DAIs from 0,
which creates confusing debugging scenario, e.g. DTS should use
<&lpass_wsamacro 2> for WSA_MACRO_AIF_VI with dai->id=3.
This also wastes some space, because drivers allocate few arrays for all
DAIs and basically the [0] is never used.
Drop the confusing first AIF_INVALID DAI identifier so the enum with DAI
IDs will start from 0. This has little functional impact and does not
affect the ABI, except saving a few bytes of memory per driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250523121811.380045-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To be more resilient to codec-detection failures when the hardware
powers on slowly, add retry mechanism to the device verification check.
Similar pattern is found throughout a number of Realtek codecs. Our
tests show that 60ms delay is sufficient to address readiness issues on
rt5640 chip.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Xinxin Wan <xinxin.wan@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530142120.2944095-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Registers 0xfa and 0xfb represent "General Control 1" and "General
Control 2" respectively.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530142120.2944095-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for tas5753, device is similar to tas5733 but with added
headphone / line driver.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
Link: https://patch.msgid.link/20250528-asoc-tas5753-support-v1-1-a50c3f6734ee@openpixelsystems.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Device has also VDD_PX supply, which should be acquired by the driver.
Regulator framework will provide a dummy supply, thus the change is
compatible with older DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250526-b4-asoc-wcd9395-vdd-px-v1-6-64d3cb60313b@linaro.org
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No need to store devm_gpiod_get() error code in temporary variable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250526-b4-asoc-wcd9395-vdd-px-v1-4-64d3cb60313b@linaro.org
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Drop separate regulator get and enable in probe() path with
devm_regulator_bulk_get_enable(), which simplifies cleanup paths and
device remove().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250526-b4-asoc-wcd9395-vdd-px-v1-3-64d3cb60313b@linaro.org
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Drop separate regulator get and enable in probe() path with
devm_regulator_bulk_get_enable(), which simplifies cleanup paths and
device remove().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250526-b4-asoc-wcd9395-vdd-px-v1-2-64d3cb60313b@linaro.org
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Drop separate regulator get and enable in probe() path with
devm_regulator_bulk_get_enable(), which simplifies cleanup paths and
device remove().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250526-b4-asoc-wcd9395-vdd-px-v1-1-64d3cb60313b@linaro.org
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'wcd_regmap_irq_chip' and 'jack' in 'struct wcd939x_priv' are not used
at all.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-asoc-const-unused-v1-8-19a5d07b9d5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Member wcd938x_priv.variant is assigned in probe() function and used
immediately thereafter, thus it can be just a local variable for less
variables stored in 'struct wcd938x_priv' device-wide state.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-asoc-const-unused-v1-7-19a5d07b9d5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'wcd_regmap_irq_chip' and 'jack' in 'struct wcd938x_priv' are not used
at all.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-asoc-const-unused-v1-6-19a5d07b9d5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'wcd_regmap_irq_chip' and 'jack' in 'struct wcd937x_priv' are not used
at all.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-asoc-const-unused-v1-5-19a5d07b9d5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Members wcd934x_codec.num_rx_port and num_tx_port are not read anywhere
after assignment, so they can be safely dropped.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-asoc-const-unused-v1-4-19a5d07b9d5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Member wcd9335_codec.sido_input_src is not read anywhere after
assignment, so it can be safely dropped.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-asoc-const-unused-v1-3-19a5d07b9d5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Static arrays/structs for regmap configuration like 'struct
reg_default', 'struct reg_sequence' and others are not modified so can
be changed to const for more safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-asoc-const-unused-v1-1-19a5d07b9d5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Modify the value of ES8326_SDINOUT1_IO in the initialization
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20250604061821.2678-1-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a type promotion that can happen when freq(u32) variable is
comapared with sclk_target(integer), when sclk_target is a negative
value it promotes to a large postive integer which might not be a
problem in this particular case as the condition evaluates to false
when that happens, but bail out early when sclk_target has negative
error codes.
cs48l32_sclk_rates[i].freq >= sclk_target
Fix this by adding a negative error check when
snd_soc_tdm_params_to_bclk() fails
Fixes: e2bcbf99d045 ("ASoC: cs48l32: Add driver for Cirrus Logic CS48L32 audio DSP")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://patch.msgid.link/20250603214813.197346-1-harshit.m.mogalapalli@oracle.com
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
