| Age | Commit message (Collapse) | Author | Files | Lines |
|
Motorola CPCAP, Lochnagar Sound, Rockchip RK817 and Qualcomm
WCD9340/WCD9341 do not depend on parent MFD driver in build time and can
be compile tested without respective MFD part for increased build
coverage.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220826093659.1059276-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no reason to set type_base here: the chip doesn't set
num_type_regs and none of the IRQs have type information so it's
not possible for regmap-irq to configure IRQ types.
Type registers are also deprecated in regmap-irq, so any IRQ type
support in the future should be implemented using config registers
instead.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220721102558.25457-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Type registers in regmap-irq have been deprecated in favor of config
registers, which are more general. Chips using type_base can switch
over to a single config base register and a standard ->set_irq_type()
callback provided by regmap-irq, which uses the type info associated
with each 'struct regmap_irq' to update type registers in the same
way as the old code did.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220721102558.25457-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Expose a control for the setting of 'DC blocker' highpass filter in the
playback path of TAS2764.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825140241.53963-6-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add an IRQ handler which logs detected faults (but doesn't do anything
else).
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825140241.53963-5-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Because the PWR_CTRL field is modeled as the power state of the DAC
widget, and at the same time it is used to implement mute/unmute, we
need some additional book-keeping to have the right end result no matter
the sequence of calls. Without this fix, one permanently mutes an
ongoing stream by toggling the associated speaker pin control.
(This mirrors commit 1e5907bcb3a3 ("ASoC: tas2770: Fix handling of
mute/unmute") which was a fix to the tas2770 driver.)
Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825140241.53963-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver is setting the PWR_CTRL field in both the set_bias_level
callback and on DAPM events of the DAC widget (and also in the
mute_stream method). Drop the set_bias_level callback altogether as the
power setting it does is in conflict with the other code paths.
(This mirrors commit c8a6ae3fe1c8 ("ASoC: tas2770: Drop conflicting
set_bias_level power setting") which was a fix to the tas2770 driver.)
Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825140241.53963-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The part is a mono speaker amp, but it can do downmix and switch between
left and right channel, so the right channel range is 1 to 2.
(This mirrors commit bf54d97a835d ("ASoC: tas2770: Allow mono streams")
which was a fix to the tas2770 driver.)
Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825140241.53963-2-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use kmemdup_nul() helper instead of open-coding to
simplify the code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220825123525.1845695-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for Noise Gate Threshold reg (ANTH reg 0x40 bit 4 to 7)
References:
- https://datasheets.maximintegrated.com/en/ds/MAX98089.pdf, p75
Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220825101714.81580-1-tommaso.merciai@amarulasolutions.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The registers may be lost after suspend due to powerdown.
regcache_sync solves this issue.
Signed-off-by: Zhu Ning <zhuning@everest-semi.com>
Link: https://lore.kernel.org/r/20220825014952.1038508-1-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
src4xxx_hw_params()
Clang warns:
sound/soc/codecs/src4xxx.c:280:3: error: variable 'd' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized]
default:
^~~~~~~
sound/soc/codecs/src4xxx.c:298:59: note: uninitialized use occurs here
ret = regmap_write(src4xxx->regmap, SRC4XXX_RCV_PLL_11, d);
^
sound/soc/codecs/src4xxx.c:223:20: note: initialize the variable 'd' to silence this warning
int val, pj, jd, d;
^
= 0
sound/soc/codecs/src4xxx.c:280:3: error: variable 'jd' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized]
default:
^~~~~~~
sound/soc/codecs/src4xxx.c:293:59: note: uninitialized use occurs here
ret = regmap_write(src4xxx->regmap, SRC4XXX_RCV_PLL_10, jd);
^~
sound/soc/codecs/src4xxx.c:223:17: note: initialize the variable 'jd' to silence this warning
int val, pj, jd, d;
^
= 0
sound/soc/codecs/src4xxx.c:280:3: error: variable 'pj' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized]
default:
^~~~~~~
sound/soc/codecs/src4xxx.c:288:59: note: uninitialized use occurs here
ret = regmap_write(src4xxx->regmap, SRC4XXX_RCV_PLL_0F, pj);
^~
sound/soc/codecs/src4xxx.c:223:13: note: initialize the variable 'pj' to silence this warning
int val, pj, jd, d;
^
= 0
3 errors generated.
The datasheet does not have any default values for these regmap values
so pick some arbitrary values and print to the user that this is the
case to silence the warnings.
Link: https://github.com/ClangBuiltLinux/linux/issues/1691
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: "Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com>
Suggested-by: Matt Flax <flatmax@flatmax.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Matt Flax <flatmax@flatmax.com>
Link: https://lore.kernel.org/r/20220823151939.2493697-1-nathan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
nau8540 driver restricts the sample rate with over sampling rate, but
currently it barely bails out at hw_params with -EINVAL error (with a
kernel message); this doesn't help for user-space to recognize which
rate can be actually used.
This patch introduces the proper hw constraint for adjusting the
available range of the sample rate depending on the OSR setup, as well
as some code cleanup, for improving the communication with
user-space. Now applications can know the valid rate beforehand and
reduces the rate appropriately without errors.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220823081000.2965-6-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
nau8825 driver restricts the sample rate with over sampling rate, but
currently it barely bails out at hw_params with -EINVAL error (with a
kernel message); this doesn't help for user-space to recognize which
rate can be actually used.
This patch introduces the proper hw constraint for adjusting the
available range of the sample rate depending on the OSR setup, as well
as some code cleanup, for improving the communication with
user-space. Now applications can know the valid rate beforehand and
reduces the rate appropriately without errors.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220823081000.2965-5-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
nau8824 driver restricts the sample rate with over sampling rate, but
currently it barely bails out at hw_params with -EINVAL error (with a
kernel message); this doesn't help for user-space to recognize which
rate can be actually used.
This patch introduces the proper hw constraint for adjusting the
available range of the sample rate depending on the OSR setup, as well
as some code cleanup, for improving the communication with
user-space. Now applications can know the valid rate beforehand and
reduces the rate appropriately without errors.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220823081000.2965-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The semaphore of nau8824 wasn't properly unlocked at some error
handling code paths, hence this may result in the unbalance (and
potential lock-up). Fix them to handle the semaphore up properly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220823081000.2965-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
nau8821 driver restricts the sample rate with over sampling rate, but
currently it barely bails out at hw_params with -EINVAL error (with a
kernel message); this doesn't help for user-space to recognize which
rate can be actually used.
This patch introduces the proper hw constraint for adjusting the
available range of the sample rate depending on the OSR setup, as well
as some code cleanup, for improving the communication with
user-space. Now applications can know the valid rate beforehand and
reduces the rate appropriately without errors.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220823081000.2965-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To make snd_hda_codec_device_init() the only constructor for struct
hda_codec instances remaining tasks are:
1) no struct may wrap struct hda_codec as its base type
2) bus drivers (skylake and sof) which are the current hdac_ext users
need to be adjusted to make use of newly added codec init and exit
routines instead
3) as bus drivers (skylake and sof) are to be responsible for creating
codec device and assigning it to hdac_hda_priv->codec,
hdac_hda_dev_probe() has to be freed of that job
To keep git bisect happy, all of these in made in one-go.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220816111727.3218543-4-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This is a collection of minor improvements to the code or comments.
|
|
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
we've been stuck with problems in the dual-amplifier configurations where
one of the two devices seems to become UNATTACHED and never regains sync,
see https://github.com/thesofproject/linux/issues/3638.
This is a rather infrequent issue that may happen once or twice per month,
but still it remains a concern.
One possibility is that the device does lose sync but somehow our hardware
detection fails to see it resync.
This series just adds a basic read directly from the PING frames to help
confirm if yes/no the device regain sync.
|
|
Use the new snd_soc_tdm_params_to_bclk() helper function to
calculate the bclk. This function handles most of the previous
manipulation and makes the code tidier.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220817122347.1356773-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix "much change together" to "must change together".
It's probably obvious what was meant but it's nice to fix it.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220817122347.1356773-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The array of supply name strings doesn't need to be in the header file.
Move it to the .c file.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220817122347.1356773-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make cs42l42.h include the other headers it depends on instead of
assuming that the .c file already included them.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220817122347.1356773-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
kernel.h includes a lot of other headers that we don't need.
Replace with an include of types.h.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220817122347.1356773-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This helper should help identify cases where devices fall off the bus
and don't resync.
BugLink: https://github.com/thesofproject/linux/issues/3638
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220714011043.46059-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new kcontrol for phase calib
Signed-off-by: Kevin Lu <luminlong@139.com>
Link: https://lore.kernel.org/r/20220815112715.21617-1-luminlong@139.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
es8326_regmap_config is only used in es8326.c now, change it to static.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220817091519.2487385-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.0
A relatively large batch of fixes that came in since my pull request,
none of them too major and mostly device specific apart from a series of
security/robustness improvements from Takashi.
|
|
The ES8326 codec is not compatible with ES8316 and requires
a dedicated driver.
------
v6 remove rate 96000 remove HEX suffix
Signed-off-by: David Yang <yangxiaohua@everest-semi.com>
Signed-off-by: Zhu Ning <zhuning@everest-semi.com>
Link: https://lore.kernel.org/r/20220816024456.4475-2-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Merge series from Takashi Iwai <tiwai@suse.de>:
This is a patch set for rather simple conversions from the plain
sprintf() & co to the new helpers, sysfs_emit() and sysfs_emit_at().
No functional changes are expected.
|
|
Only report a button state change if the interrupt status shows that
there was a button event.
Previously the code would always drop into the button reporting at the
end of interrupt handling if the jack was present. If neither of the
button report interrupts were pending it would report all buttons
released. This could then lead to a button being reported as released
while it is still pressed.
Fixes: c5b8ee0879bc ("ASoC: cs42l42: Report jack and button detection")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220815123138.3810249-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The platform_get_irq() returns negative error codes. It can't actually
return zero, but if it did that should be treated as success.
Fixes: eef07b9e0925 ("ASoC: mediatek: mt6359: add MT6359 accdet jack driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YvThhr86N3qQM2EO@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'unsigned int' is better than 'unsigned'.
Signed-off-by: Xin Gao <gaoxin@cdjrlc.com>
Link: https://lore.kernel.org/r/20220808153910.59545-1-gaoxin@cdjrlc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The src4xxx keyword is used for future capability to integrate
other codecs similar to the src4392 to the same code base.
Signed-off-by: Matt Flax <flatmax@flatmax.com>
Link: https://lore.kernel.org/r/20220810013213.1544645-1-flatmax@flatmax.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
s/TLV320ADCX104/TLV320ADCX140/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/63efe8fe4e25a8ac386762d2d7cfe9bb9482333f.1659814389.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For sysfs outputs, it's safer to use a new helper, sysfs_emit(),
instead of the raw sprintf() & co. This patch replaces the sprintf()
usage straightforwardly with a new helper, sysfs_emit().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220801170108.26340-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sysfs_emit() is a new helper to simplify the sysfs string output.
Replace the open-code straightforwardly with this new helper.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220801170108.26340-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
The two commits referenced below break mono playback via I2S DAI because
they set BCLK to half the required speed. For PCM transport over I2S, the
number of transmitted channels is always 2, even for mono playback.
Fixes: dcd79364bff3 ("ASoC: codec: tlv3204: Enable 24 bit audio support")
Fixes: 40b37136287b ("ASoC: tlv320aic32x4: Fix bdiv clock rate derivation")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220810104156.665452-1-p.zabel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Martin Povišer <povik+lin@cutebit.org>:
The first two fixes should be straightforward.
The latter two clean up what looks to me like a mess in the setting of
power levels. However we settle it, we should then do the same changes
to TAS2764, which has the same template (and maybe there are other
drivers).
|
|
The patch fixes the JD voltage dropping issue in the HDA JD using.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Reported-by: Mohan Kumar D <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20220808052836.25791-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Because the PWR_CTRL field is modeled as the power state of the DAC
widget, and at the same time it is used to implement mute/unmute, we
need some additional book-keeping to have the right end result no matter
the sequence of calls. Without this fix, one can mute an ongoing stream
by toggling a speaker pin control.
Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-5-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver is setting the PWR_CTRL field in both the set_bias_level
callback and on DAPM events of the DAC widget (and also in the
mute_stream method). Drop the set_bias_level callback altogether as the
power setting it does is in conflict with the other code paths.
Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The part is a mono speaker amp, but it can do downmix and switch between
left and right channel, so the right channel range is 1 to 2.
Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix setting of FSYNC polarity for DAI formats other than I2S. Also
add support for polarity inversion.
Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-2-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: More updates for v5.20
More updates that came in since the last pull request I sent, a series
of driver specific changes:
- Support for AMD RPL, some Intel platforms and Mediatek MT8186.
|
|
|
|
VA Macro fsgen clock is supplied to other LPASS Macros using proper
clock apis, however the internal user uses the registers directly without
clk apis. This approch has race condition where in external users of
the clock might cut the clock while VA macro is actively using this.
Moving the internal usage to clk apis would provide a proper refcounting
and avoid such race conditions.
This issue was noticed while headset was pulled out while recording is
in progress and shifting record patch to DMIC.
Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Link: https://lore.kernel.org/r/20220727124749.4604-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|