| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Sometimes the codec probe would be called earlier than the hardware initialization.
Therefore, the speaker route should be added before the the first_hw_init check.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Fixes: f3da2ed110e2 ("ASoC: rt1712-sdca: enable pm_runtime in probe, keep status as 'suspended'")?
Link: https://lore.kernel.org/r/20231030103644.1787948-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This was sent too late to actually make it for v6.6 but was sent against
v6.6 so merge it up here.
|
|
In the current setup the PA is left unmuted even when the
Soundwire ports are not started streaming. This can lead to click
and pop sounds during start.
There is a same issue in the reverse order where in the PA is
left unmute even after the data stream is stopped, the time
between data stream stopping and port closing is long enough
to accumulate DC on the line resulting in Click/Pop noise
during end of stream.
making use of new mute_unmute_on_trigger flag is helping a
lot with this Click/Pop issues reported on this Codec
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231027105747.32450-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The aw88395_lib module is shared by all the aw883* drivers that
need to select the corresponding Kconfig symbol. The newly added
aw88399 incorrectly selects SND_SOC_AW88399_LIB instead, which
is not defined anywhere in the kernel, causing a link failure when
the actual one is missing:
arm-linux-gnueabi-ld: sound/soc/codecs/aw88399.o: in function `aw88399_codec_probe':
aw88399.c:(.text+0xbc6): undefined reference to `aw88395_dev_load_acf_check'
arm-linux-gnueabi-ld: aw88399.c:(.text+0xbea): undefined reference to `aw88395_dev_cfg_load'
Fixes: 8ade6cc7e261 ("ASoC: codecs: Add aw88399 amplifier driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231027152403.386257-2-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Some codec drivers compare widget names with strcmp, ignoring
the component name prefix. If prefix is used, the comparisons start failing.
Except Qualcomm lpass-rx-macro, none of the patches were tested
on hardware.
|
|
Merge series from wangweidong.a@awinic.com:
Add the awinic,aw88399 property to the awinic,aw88395.yaml file.
Add i2c and amplifier registration for
aw88399 and their associated operation functions.
|
|
The existing code checks for the correct state transition after sending
a command. However, it is possible for the message box to return -1,
which indicates an error, if an error has occurred in the firmware.
We can detect if the error has occurred, and return a different error.
In addition, there is no recovering from a CSPL error, so the retry
mechanism is not needed in this case, and we can return immediately.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231026150558.2105827-9-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
To ensure the chip has correctly reset during probe and system suspend,
we need to force a software reset, in case of systems where the
hardware reset is not available.
The software reset register was labelled as volatile but not readable,
however, it is readable, (just returns 0x0). Adding it to readable
registers means it will be correctly treated as volatile, and thus
will not be cached.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-6-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231023095428.166563-12-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231023095428.166563-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231023095428.166563-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231023095428.166563-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231023095428.166563-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231023095428.166563-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231023095428.166563-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231023095428.166563-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231023095428.166563-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231023095428.166563-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231023095428.166563-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_dai_driver array in wcd938x driver has two entries whose order
must match order of wcd938x->sdw_priv array. The wcd938x_bind() and
wcd938x_codec_set_sdw_stream() rely on this order. wcd938x->sdw_priv
array is indexed by enum with AIF1_PB and AIF1_CAP, so use the same
defines instead of raw numners for snd_soc_dai_driver array.
No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231019144108.42853-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add i2c and amplifier registration for
aw88399 and their associated operation functions.
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20231025112625.959587-4-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add aw88399 compatible code to the aw88395_lib.c file
so that it can parse aw88399's bin file.
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20231025112625.959587-3-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Variable d_len_code is being initialized to zero and then re-assigned a
different value in all the valid cases in the following switch statement.
The only place it is not being assigned a value is on the return for
a default case and in this case it does not need to be assigned. The
initialization is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20231023154917.671595-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Get fixes needed so we can enable build of ams-delta in more
configurations.
|
|
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>:
This is another series to convert ASoC drivers to use struct
platform_driver:remove_new(). The rockchip one was already send before
but with a wrong subject prefix, the cs42l43 driver is newer than the
last series. The remaining five patches are for driver combos that my
coccinelle patch failed to detect before.
|
|
I have a board (RK3588 based) that sets the sysclk to 12287999. The
es8328 driver fails to match this to the 12288000 rate and fails to
load. Allow the rate comparison to work if the frequency is within
100hz by dividing it by 100 and rounding it, then multiplying it back
by 100.
Note the 100hz value was chosen arbitrarily by me, but it has only
been tested with a 1hz difference.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231020171539.65513-1-macroalpha82@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Modify the value of max_register, otherwirse
the AW88261_EFRL1_REG register will not be
accessible.
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20231020083426.302925-3-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231013221945.1489203-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.7
This is quite a large set of changes but mostly due to API cleanups and
in driver specific ways rather than due to anything subsystem wide.
Highlights include:
- Standardisation of API prefixes on snd_soc_, removing asoc_.
- GPIO API usage improvements.
- Support for HDA patches.
- Lots of work on SOF, including crash dump support.
- Support for AMD platforms with es83xx, Awinc AT87390, many Intel
platforms, many Mediatek platforms, Qualcomm SM6115, Richtek RTQ9128
and Texas Instruments TAS575x.
[ the merge conflicts around SOF Intel HD-audio and CS35L41 subcodec
drivers are resolved here -- tiwai ]
|
|
Switch to gpiod_set_value_cansleep() to support gpiochips which can
sleep like i2c gpio expanders.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20231019131806.381280-1-m.felsch@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add new kcontrol for tone generator
Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20231018064444.23186-1-David.Rau.opensource@dm.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Don't populate the const read-only array magic_number on the stack,
instead make it static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20231017170436.176615-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Enable Gnd switch to improve stability when Jack insert event
occurs, and then disable Gnd switch after Jack type detection
is finished.
Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20231017021258.5929-1-David.Rau.opensource@dm.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Improve two errors logs which report bad information.
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
While there, use struct_size() and size_sub() helpers, instead of the
open-coded version, to calculate the size for the allocation of the
whole flexible structure, including of course, the flexible-array
member.
This code was found with the help of Coccinelle, and audited and
fixed manually.
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZSRvh1j2MVVhuOUv@work
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Correctly log failures of reset via I2C.
Signed-off-by: Roy Chateau <roy.chateau@mep-info.com>
Link: https://lore.kernel.org/r/20231013110239.473123-1-roy.chateau@mep-info.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The RT5650 should enable a power setting for button detection to avoid the wrong result.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20231013094525.715518-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
"Failed to set private value: ffffffea <= 6100000 24832" is confusing.
It should be "Failed to set private value: 6100000 <= 24832 -22"
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012191315.145411-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
"Failed to set private value: ffffffea <= 6100000 24832" is confusing.
It should be "Failed to set private value: 6100000 <= 24832 -22"
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012191315.145411-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The call to gpiod_set_value_cansleep() in cs42l42_sdw_update_status()
needs the header file gpio/consumer.h to be included.
This was introduced by commit 2d066c6a7865 ("ASoC: cs42l42: Avoid stale
SoundWire ATTACH after hard reset")
and caused error:
sound/soc/codecs/cs42l42-sdw.c:374:4: error: implicit declaration of
function ‘gpiod_set_value_cansleep’;
did you mean gpio_set_value_cansleep’?
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2d066c6a7865 ("ASoC: cs42l42: Avoid stale SoundWire ATTACH after hard reset")
Link: https://lore.kernel.org/r/20231011134853.20059-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have adjacent changes for the cs42l43 DT schema, merge the fixes
branch up so that there's a single thing for people to base future
changes on.
|
|
Due to an error in the datasheet the bias sense values currently don't
match the hardware. Whilst this is a change to the binding no devices
have yet shipped so updating the binding will not cause any issues.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231010102425.3662364-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Rob Herring <robh@kernel.org>:
This is a series is part of ongoing clean-ups related to device
matching and DT related implicit includes. Essentially of_device.h has
a bunch of implicit includes and generally isn't needed any nore except
for of_match_device(). As we also generally want to get rid of
of_match_device() as well, I've done that so we're not updating the
includes twice.
|
|
The ASP1 DOUT line must be defaulted to be high-impedance when
it is not actually transmitting data for an active channel.
In non-SoundWire modes ASP1 will usually be shared by multiple
amps so each amp must only drive the line during the slot for
an enabled TX channel.
In SoundWire mode a custom firmware can use ASP1 as a secondary
chip-to-chip audio link or as GPIO. It should be defaulted to
high-impedance since by default the purpose of this pin is not
known.
Backport note:
On kernel versions before 6.6 the cs35l56->base.regmap argument
to regmap_set_bits() must be changed to cs35l56->regmap.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://lore.kernel.org/r/20231009153412.30380-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Some codec drivers compare widget names with strcmp, ignoring the component
name prefix. If prefix is used, the comparisons start failing.
Add a helper to fix the issue.
|
|
Merge series from Johan Hovold <johan+linaro@kernel.org>:
The wcd938x codec driver happily ignores error handling, something which
has bitten us in the past when we hit a probe deferral:
https://lore.kernel.org/lkml/20230705123018.30903-1-johan+linaro@kernel.org/
Fix up the remaining probe and component bind paths that left resources
allocated and registered after errors to avoid similar future issues.
|
|
Driver compares widget name in wsa_macro_spk_boost_event() widget event
callback, however it does not handle component's name prefix. This
leads to using uninitialized stack variables as registers and register
values. Handle gracefully such case.
Fixes: 2c4066e5d428 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231003155422.801160-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use preferred i2c_get_match_data() instead of of_match_device() and
i2c_match_id() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.
Avoid using 0 for enum da7218_dev_id so that no match data can be
distinguished.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-3-13a4f0f7fee6@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If probe is reached, we've already matched the device and in the case of
DT matching, the struct device_node pointer will be set. Therefore, there
is no need to call of_match_device() in probe.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-2-13a4f0f7fee6@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> # for at91
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-1-13a4f0f7fee6@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
