summaryrefslogtreecommitdiff
path: root/sound/soc/codecs
AgeCommit message (Collapse)AuthorFilesLines
2017-01-10Merge remote-tracking branches 'asoc/fix/nau8825', 'asoc/fix/rt5645', ↵Mark Brown4-7/+25
'asoc/fix/tlv320aic3x' and 'asoc/fix/topology' into asoc-linus
2017-01-10Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/dpcm', ↵Mark Brown1-1/+24
'asoc/fix/dwc', 'asoc/fix/fsl-ssi' and 'asoc/fix/hdmi-codec' into asoc-linus
2017-01-09ASoC: rt5645: set sel_i2s_pre_div1 to 2Bard Liao1-0/+3
The i2s clock pre-divider 1 is used for both i2s1 and sysclk. The i2s1 is usually used for the main i2s and the pre-divider will be set in hw_params function. However, if i2s2 is used, the pre-divider is not set in the hw_params function and the default value of i2s clock pre-divider 1 is too high for sysclk and DMIC usage. Fix by overriding default divider value to 2. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95681 Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-31ASoC: nau8825: fix invalid configuration in Pre-Scalar of FLLJohn Hsu2-2/+4
The clk_ref_div is not configured in the correct position of the register. The patch fixes that clk_ref_div, Pre-Scalar, is assigned the wrong value. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-31ASoC: nau8825: correct the function name of registerJohn Hsu2-5/+5
Change to correct name of the register function. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-31ASoC: tlv320aic3x: Mark the RESET register as volatilePeter Ujfalusi1-0/+13
The RESET register only have one self clearing bit and it should not be cached. If it is cached, when we sync the registers back to the chip we will initiate a software reset as well, which is not desirable. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-20ASoC: wm_adsp: Don't overrun firmware file buffer when reading region dataRichard Fitzgerald1-1/+24
Protect against corrupt firmware files by ensuring that the length we get for the data in a region actually lies within the available firmware file data buffer. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-14Merge tag 'sound-4.10-rc1' of ↵Linus Torvalds69-2154/+15539
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "No dramatic changes are found in this development cycle, but as usual, many commits are applied in a wide range of drivers. Most of big changes are in ASoC, where a few bits of framework work and quite a lot of cleanups and improvements to existing code have been done. The rest are usual stuff, a few HD-audio and USB-audio quirks and fixes, as well as the drop of kthread usages in the whole subsystem. Below are some highlights: ASoC: - support for stereo DAPM controls - some initial work on the of-graph sound card - regmap conversions of the remaining AC'97 drivers - a new version of the topology ABI; this should be backward compatible - updates / cleanups of rsnd, sunxi, sti, nau8825, samsung, arizona, Intel skylake, atom-sst - new drivers for Cirrus Logic CS42L42, Qualcomm MSM8916-WCD, and Realtek RT5665 USB-audio: - yet another race fix at disconnection - tolerated packet size calculation for some Android devices - quirks for Axe-Fx II, QuickCam, TEAC 501/503 HD-audio: - improvement of Dell pin fixup mapping - quirks for HP Z1 Gen3, Alienware 15 R2 2016 and ALC622 headset mic Misc: - replace all kthread usages with simple works" * tag 'sound-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (296 commits) ALSA: hiface: Fix M2Tech hiFace driver sampling rate change ALSA: usb-audio: Eliminate noise at the start of DSD playback. ALSA: usb-audio: Add native DSD support for TEAC 501/503 DAC ASoC: wm_adsp: wm_adsp_buf_alloc should use kfree in error path ASoC: topology: avoid uninitialized kcontrol_type ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirks ALSA: usb-audio: add implicit fb quirk for Axe-Fx II ASoC: zte: spdif: correct ZX_SPDIF_CLK_RAT define ASoC: zte: spdif and i2s drivers are not zx296702 specific ASoC: rsnd: setup BRGCKR/BRRA/BRRB when starting ASoC: rsnd: enable/disable ADG when suspend/resume timing ASoC: rsnd: tidyup ssi->usrcnt counter check in hw_params ALSA: cs46xx: add a new line ASoC: Intel: update bxt_da7219_max98357a to support quad ch dmic capture ASoC: nau8825: disable sinc filter for high THD of ADC ALSA: usb-audio: more tolerant packetsize ALSA: usb-audio: avoid setting of sample rate multiple times on bus ASoC: cs35l34: Simplify the logic to set CS35L34_MCLK_CTL setting ALSA: hda - Gate the mic jack on HP Z1 Gen3 AiO ALSA: hda: when comparing pin configurations, ignore assoc in addition to seq ...
2016-12-12Merge remote-tracking branches 'asoc/topic/wm9712', 'asoc/topic/wm9713' and ↵Mark Brown4-105/+86
'asoc/topic/zte' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/wm8580', 'asoc/topic/wm8753', ↵Mark Brown7-126/+157
'asoc/topic/wm8978', 'asoc/topic/wm9081' and 'asoc/topic/wm9705' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/tlv320aic31xx', ↵Mark Brown7-85/+29
'asoc/topic/topology', 'asoc/topic/uda1380', 'asoc/topic/wm2200' and 'asoc/topic/wm8523' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/stac9766', 'asoc/topic/sti', ↵Mark Brown3-266/+92
'asoc/topic/sti-codec', 'asoc/topic/sunxi' and 'asoc/topic/tegra' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/rt5665', 'asoc/topic/rt5670', ↵Mark Brown4-10/+19
'asoc/topic/rt5677', 'asoc/topic/samsung' and 'asoc/topic/simple' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/rt5514', 'asoc/topic/rt5616', ↵Mark Brown14-1148/+8065
'asoc/topic/rt5640', 'asoc/topic/rt5660' and 'asoc/topic/rt5663' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/rl6231', 'asoc/topic/rl6347a', ↵Mark Brown4-4/+24
'asoc/topic/rockchip', 'asoc/topic/rt286' and 'asoc/topic/rt298' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/of-graph', 'asoc/topic/pxa', ↵Mark Brown4-1/+1824
'asoc/topic/qcom' and 'asoc/topic/rk808' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/inntel', 'asoc/topic/input', ↵Mark Brown3-17/+142
'asoc/topic/max98504' and 'asoc/topic/nau8825' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/dpcm', 'asoc/topic/es8328', ↵Mark Brown3-85/+21
'asoc/topic/extcon' and 'asoc/topic/fsl' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/cs42l42', 'asoc/topic/cs42l56', ↵Mark Brown7-24/+2777
'asoc/topic/cs42l73' and 'asoc/topic/cs42xx8' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/compress', 'asoc/topic/const' and ↵Mark Brown4-0/+1527
'asoc/topic/cs35l34' into asoc-next
2016-12-12Merge remote-tracking branches 'asoc/topic/ab8500', 'asoc/topic/arizona', ↵Mark Brown11-263/+638
'asoc/topic/atmel', 'asoc/topic/bcm' and 'asoc/topic/bitfield' into asoc-next
2016-12-12Merge remote-tracking branch 'asoc/topic/dapm' into asoc-nextMark Brown4-4/+4
2016-12-12Merge remote-tracking branches 'asoc/fix/da7219-pops' and 'asoc/fix/qcom' ↵Mark Brown3-22/+140
into asoc-linus
2016-12-12ASoC: wm_adsp: wm_adsp_buf_alloc should use kfree in error pathRichard Fitzgerald1-1/+1
buf was allocated by kzalloc() so it should be passed to kfree() Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-06ASoC: nau8825: disable sinc filter for high THD of ADCJohn Hsu2-1/+4
This bit will enable 4th order SINC filter. =1, filter will enable; but it consumes higher power. =0, the sinc filter is disable, and it should always keep 0 value to get high THD. Therefor, disable the filter when codec initiation for better performance when recording. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-06ASoC: cs35l34: Simplify the logic to set CS35L34_MCLK_CTL settingAxel Lin1-3/+3
The logic of "value = ~CS35L34_MCLK_DIV & CS35L34_MCLK_RATE_XXXXXX;" is unnecessary complex. By setting CS35L34_MCLK_DIV | CS35L34_MCLK_RATE_MASK as the mask for regmap_update_bits() call, what the code does is exactly the same as setting value = CS35L34_MCLK_RATE_XXXXXX. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Paul Handrigan <Paul.Handrigan@cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-05ASoC: cs42l56: Fix misuse of regmap_update_bitsFlorian Vaussard1-4/+8
Using regmap_update_bits(..., mask, 1) with 'mask' following (1 << k) and k greater than 0 is wrong. Indeed, _regmap_update_bits will perform (mask & 1), which results in 0 if LSB of mask is 0. Thus the call regmap_update_bits(..., mask, 1) is in reality equivalent to regmap_update_bits(..., mask, 0). In such a case, the correct use is regmap_update_bits(..., mask, mask). This driver is performing such a mistake with the CS42L56_AIN*_REF_MASK masks, which equal 0x10, 0x20, 0x40 and 0x80. Fix the driver to make it consistent with the API. Please note that this change is untested, as I do not have this piece of hardware. Testers are welcome! Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30ASoC: nau8825: lock longer to avoid playback pop upon resumeJohn Hsu1-6/+6
There is an issue about pop noise in NAU88L25 as follows. Issue 54078: Chell_headphone pop back from S3 (1)Play directly to hw, bypassing CRAS: sox -b 16 -n -t alsa hw:0,0 synth sine 200 sine 200 (2)Close lid or powerd_dbus_suspend, then press a key to resume. (3)no audio after resume (4)Audio will be back after close then reopen the pcm device. After verification, we find one defect is that semaphone lock is not long enough and expired. In this situation, the playback comes back early but pauses a while to wait for the crosstalk detection done. But the detection spends too much time and lock time is up. Therefore, the playback and jack detection sequence interfere to each other. That breaks sequence and makes noise. The driver extends the lock time for the issue. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30ASoC: arizona: Use component pin control functionsRichard Fitzgerald6-9/+18
We need to modify the state of some of our own pins and are currently not taking account that the pin name may have a name_prefix applied to it. Replace the snd_soc_dapm_x_pin functions with the equivalent snd_soc_component_x_pin functions so that any name_prefix will be handled automatically. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30ASoC: rt5670: Add missing 10EC5072 ACPI IDTakashi Iwai1-0/+1
rt5670 driver supports also RT5672 codec, but its ACPI ID is missing. This was found on Dell Wyse 3040 box. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30ASoC: rt5670: Enable Braswell platform workaround for Dell Wyse 3040Takashi Iwai1-0/+7
Dell Wyse 3040 requires the platform workaround for enabling dmic and jack detection as defined for Braswell CRB. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30Merge tag 'drm-qemu-20161121' of git://git.kraxel.org/linux into drm-nextDave Airlie7-34/+32
drm/virtio: fix busid in a different way, allocate more vbufs. drm/qxl: various bugfixes and cleanups, * tag 'drm-qemu-20161121' of git://git.kraxel.org/linux: (224 commits) drm/virtio: allocate some extra bufs qxl: Allow resolution which are not multiple of 8 qxl: Don't notify userspace when monitors config is unchanged qxl: Remove qxl_bo_init() return value qxl: Call qxl_gem_{init, fini} qxl: Add missing '\n' to qxl_io_log() call qxl: Remove unused prototype qxl: Mark some internal functions as static Revert "drm: virtio: reinstate drm_virtio_set_busid()" drm/virtio: fix busid regression drm: re-export drm_dev_set_unique Linux 4.9-rc5 gp8psk: Fix DVB frontend attach gp8psk: fix gp8psk_usb_in_op() logic dvb-usb: move data_mutex to struct dvb_usb_device iio: maxim_thermocouple: detect invalid storage size in read() aoe: fix crash in page count manipulation lightnvm: invalid offset calculation for lba_shift Kbuild: enable -Wmaybe-uninitialized warnings by default pcmcia: fix return value of soc_pcmcia_regulator_set ...
2016-11-29ASoC: rt298: disable IRQ when jack is NULLBard Liao1-2/+22
Disable IRQ when jack is NULL in rt298_mic_detect. So machine driver can use it in suspend/resume. Signed-off-by: Bard Liao <bardliao@realtek.com> Reviewed-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-29ASoC: wm_adsp: Remove redundant extern declarationsCharles Keepax1-13/+12
Functions are given external linkage by default making the extern's unnecessary, as such remove them. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-29ASoC: arizona: Remove redundant extern declarationsCharles Keepax1-42/+38
Functions are given external linkage by default making the extern's unnecessary, as such remove them. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-23ASoC: ab8500: Remove explicit initialization of driver callbacks to NULLLars-Peter Clausen1-2/+0
Fields of structs with global storage are implicitly initialized to 0/NULL, there is usually no need to do this explicitly. Removing the initialization of the legacy suspend/resume callback fields also gets the driver ready for the day when they are eventually removed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-23ASoC: uda1380: Request GPIOs at bus probe timeLars-Peter Clausen1-35/+20
Resources should be requested when the device is probed on the control bus rather then when the CODEC is bound to the sound card. This allows things like probe deferring and device managed allocations to work. So move the GPIO request calls from the CODEC probe to the bus probe and also make them managed along the way. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-23ASoC: uda1380: Remove unused DAI ID definesLars-Peter Clausen1-4/+0
The DAI ID defines are back from the time when DAIs were referenced by a numerical ID. These days a string is used for matching instead and the defines are unused. The last user of these defines was removed in commit f0fba2ad1b6b ("ASoC: multi-component - ASoC Multi-Component Support"). So remove the defines as well. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-22ASoC: wm_adsp: Check return value from wm_adsp_buffer_initCharles Keepax1-1/+6
We are not checking the return value from a call to wm_adsp_buffer_init it looks like this used to be returned at the bottom of the function but probably got missed when more error paths were added. This patch adds the appropriate error check. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-22ASoC: wm_adsp: Remove unused wm_coeff_ctl.kcontrolRichard Fitzgerald1-3/+0
The kcontrol pointer in wm_coeff_ctl is not used now. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-22ASoC: wm_adsp: Firmware controls should be added as codec controlsRichard Fitzgerald2-5/+5
We were adding firmware controls as card controls (using snd_soc_add_codec_controls). The DSP is part of a specific codec so we should be adding them as codec controls. Adding as codec controls also means that if the codec has a name_prefix it will be added to the control name, which won't happen when adding as a card control. As that was the only use of the card pointer in struct wm_adsp it can be removed. For ADSP2 codecs a wm_adsp2_codec_probe() was added since the original control handling was written, and that's the logical place to store a pointer to the codec rather than delaying it until the codec is powered-up. For ADSP1 we don't use a codec_probe() stage so the codec pointer initialization replaces the original card pointer initialization in wm_adsp1_event(). Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-22ASoC: wm8580: Remove #if IS_ENABLED(CONFIG_I2C)Kuninori Morimoto1-24/+1
wm8580 driver doesn't work without CONFIG_I2C anyway. Let's remove #if IS_ENABLED(CONFIG_I2C), and use module_i2c_driver(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-21ASoC: wm8523: Remove #if IS_ENABLED(CONFIG_I2C)Kuninori Morimoto1-23/+1
wm8523 driver doesn't work without CONFIG_I2C anyway. Let's remove #if IS_ENABLED(CONFIG_I2C), and use module_i2c_driver(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-21ASoC: wm_adsp: Only write shutdown controls for active firmwaresCharles Keepax1-0/+3
The control list may contain shutdown controls for firmwares that are not currently active, attempting to write this will at best fail. To avoid this issue we skip any control that is not active. Fixes: commit f4f0c4c60c39 ("ASoC: wm_adsp: Signal firmware shutdown through event control") Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-18ASoC: wm9081: Remove #if IS_ENABLED(CONFIG_I2C)Kuninori Morimoto2-2/+1
wm9081 driver doesn't work without CONFIG_I2C anyway. Let's remove #if IS_ENABLED(CONFIG_I2C) And, this patch adds "depends on I2C" to Kconfig Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-18ASoC: uda1380: Remove #if IS_ENABLED(CONFIG_I2C)Kuninori Morimoto2-21/+2
uda1380 driver doesn't work without CONFIG_I2C anyway. Let's remove #if IS_ENABLED(CONFIG_I2C), and use module_i2c_driver(). And, this patch adds "depends on I2C" to Kconfig Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-16ASoC: rt5677: Remove superfluous linux/kthread.h inclusionTakashi Iwai1-1/+0
It's nowhere used in this driver code. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-16ASoC: rt5514: Remove superfluous linux/kthread.h inclusionTakashi Iwai1-1/+0
It's nowhere used in this driver code. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-16ASoC: rt5665: Use devm_gpio_request_one()Axel Lin1-4/+2
Simplify the code a bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-16ASoC: rt5665: Fix missing mutex_unlock in rt5665_calibrateAxel Lin1-2/+3
Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 02:38:35 +0300