summaryrefslogtreecommitdiff
path: root/sound/soc/codecs
AgeCommit message (Collapse)AuthorFilesLines
2011-05-08ASoC: UDA134x: Remove POWER_OFF_ON_STANDBY define.Marek Belisko1-2/+0
Define POWER_OFF_ON_STANDBY cause trobles when trying to get some sound from codec because code for bias setup was not compiled (define wasn't defined). This define was removed in commit: cc3202f5 but again introduced by commit: f0fba2ad1 which then completely break codec functionality so remove it again. Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-05-08ASoC: SSM2602: Remove unused struct and defineLars-Peter Clausen1-6/+0
Those are leftovers from a pre-multicomponent era. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-08ASoC: SSM2602: Remove duplicate controlLars-Peter Clausen1-2/+0
There are currently two controls which allow selecting the capture source, one as a normal control, the other as part of a DAPM_MUX widget. Remove the normal control. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-08ASoC: SSM2602: Cleanup coeff handlingLars-Peter Clausen1-40/+35
Drop unused field from the coeff struct, precalculate the srate register at compile-time and cleanup up the naming. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-08Merge branch 'for-2.6.39' into for-2.6.40Mark Brown1-5/+5
2011-05-08ASoC: SSM2602: Fix reg_cache_sizeLars-Peter Clausen1-1/+1
reg_cache_size is supposed to be the number of elements in the register cache, not the size in bytes. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-08ASoC: SSM2602: Fix 'Mic Boost2' controlLars-Peter Clausen1-1/+1
The 'Mic Boost2' control's shift was off by one and thus was not working. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-05-08ASoC: SSM2602: Properly annotate i2c probe and remove functionsLars-Peter Clausen1-3/+3
Annotate the i2c probe and remove functions with __devinit and __devexit. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-04ASoC: Remove outdated FIXME from WM8915Mark Brown1-1/+0
Actually the current code is perfectly sensible given the hardware. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-05-04ASoC: Use shared controls for input signal path in WM8915Mark Brown1-20/+25
Gives finer grained power management. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-05-03ASoC: s/w->kcontrols/w->kcontrol_news/gStephen Warren1-1/+1
A future change will modify struct snd_soc_dapm_widget to store the actual kcontrol pointers for each kcontrol_new in a field named kcontrols. Rename the existing kcontrols field to enable this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-28ASoC: Implement WM8962 ADC high pass filter configurationMark Brown1-0/+10
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-26ASoC: Don't warn if the WM8962 SYSCLK FLL setting doesn't match realityMark Brown1-1/+0
When bringing up audio low power modes boards may configure SYSCLK before they actually start the FLL as we do much of the clocking setup prior to the power up sequence. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-26ASoC: Implement WM8962 DMIC supportMark Brown1-0/+31
DMIC support is automatically disabled when none of the GPIOs are set up to bring out the DMICCLK and DMICDAT pins at startup. Note that there's no support for controlling DMIC routing except the power control so the board DAPM configuration will need to manage DMIC enable and disable if analogue mics (eg, a headset) also exist. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-26ASoC: Move WM8962 FLL configuration to CODECMark Brown1-3/+2
There's only one DAI anyway. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-26ASoC: Support FLL lock interrupt on WM8962Mark Brown1-1/+15
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-26ASoC: Support 24.576MHz MCLKs in WM8915Mark Brown1-2/+5
We can safely divide these down to within the supported SYSCLK range. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-20ASoC: WM8903: Implement DMIC supportStephen Warren1-2/+21
In addition to the currently supported analog capture path, the WM8903 also supports digital mics. The analog and digital capture paths are exclusive; a mux is present to select the capture source. Logically, the mux exists to select the decimator's input, from either the ADC or DMIC block outputs. However, the ADC power domain also includes the DMIC interface. Consequently, this change represents the mux as existing immediately before the ADC, and selecting between the Input PGA and DMIC block outputs. An alternative might be to represent the mux in its correct location, and associate the ADC power enable controls with both the real ADC, and a fake ADC for the DMIC? Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-20ASoC: Add EQ and filter to max98095 CODEC driverPeter Hsiang2-0/+406
This patch adds the equalizer and biquad filter controls. Signed-off-by: Peter Hsiang <peter.hsiang@maxim-ic.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-18ASoC: Merge branch 'for-2.6.39' into for-2.6.40Mark Brown15-18/+20
Fix trivial conflict caused by silly spelling fix patch. Conflicts: sound/soc/codecs/wm8994.c
2011-04-18Merge commit 'v2.6.39-rc3' into for-2.6.39Mark Brown17-34/+46
2011-04-13ASoC: codecs: JZ4740: Convert to table based controls and DAPM setupLars-Peter Clausen1-11/+7
Use the newly introduced dapm_widgets, dpam_routes and controls fields of the snd_soc_dai_driver struct to setup controls and DAPM. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-13Merge branch 'for-2.6.39' into for-2.6.40Mark Brown1-2/+0
2011-04-13ASoC: codecs: JZ4740: Fix OOPSLars-Peter Clausen1-2/+0
Commit ce6120cc(ASoC: Decouple DAPM from CODECs) changed the signature of snd_soc_dapm_widgets_new to take an pointer to a snd_soc_dapm_context instead of a snd_soc_codec. The call to snd_soc_dapm_widgets_new in jz4740_codec_dev_probe was not updated to reflect this change, which results in a compiletime warning and a runtime OOPS. Since the core code calls snd_soc_dapm_widgets_new after the codec has been registered it can be dropped here. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-04-13ASoC: Move WM8915 FLL operations onto the CODECMark Brown1-3/+2
Since the WM8915 FLL is not tied to a particular audio interface move it to a CODEC wide operation. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: tlv320dac33: Lower the OSC calibration timePeter Ujfalusi1-2/+2
To get correct calibration, we can decrease the time needed for the OSC to calibrate itself. With this change we can save ~15ms in the OSC calibration phase. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-04-12ASoC: Fix mis cherry-pick of wm1250-ev1 driverMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-12ASoC: Add initial WM1250-EV1 Springbank audio I/O module driverMark Brown3-0/+114
The WM1250-EV1 Springbank audio I/O module for the Wolfson Glenfarclas reference platform provides a simple audio I/O with an independant clock domain, intended to simulate cellular modem and bluetooth subsystems within the platform. The card supports some limited GPIO based control but this is currently not implemented. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-12ASoC: Add WM8915 CODEC driverMark Brown4-0/+6648
The WM8915 is an ultra low power mobile CODEC designed for smartphones, featuring a mixture of digital and analogue I/O with flexible mixing options and advanced low power accessory detection functionality in a compact package. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-04-12Merge branch 'for-2.6.39' into for-2.6.40Mark Brown2-5/+5
2011-04-12ASoC: Fix output PGA enabling in wm_hubs CODECsMark Brown1-4/+4
The output PGA was not being powered up in headphone and speaker paths, removing the ability to offer volume control and mute with the output PGA. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2011-04-12ASoC: sn95031: decorate function with __devexit_p()Lu Guanqun1-1/+1
According to the comments in include/linux/init.h: "Pointers to __devexit functions must use __devexit_p(function_name), the wrapper will insert either the function_name or NULL, depending on the config options." Fix this issue in codecs sn95031. Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-08Merge branch 'for-2.6.39' into for-2.6.40Mark Brown1-15/+23
2011-04-08ASoC: SSM2602: add SPI supportMike Frysinger2-5/+53
The ssm2602 codec has a SPI interface as well as I2C, so add the simple bit of glue to make it usable. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-08ASoC: WM8903: HP and Line out PGA/mixer DAPM fixesDilan Lee1-15/+23
Update the headphone and line out mixers and PGAs use the same logical set of register bits and sequencing as the speaker mixer/PGA. This allows ALSA controls for mute and volume on headphone and line out to operate correctly. Per conversation on alsa-devel, earlier datasheets indicated that the POWER_MANAGEMENT_* register bits 0 and 1 were aliases to ANALOG_* register bits 0 and 4, and hence only one copy of those bits was programmed. However, later datasheets corrected this. From: Dilan Lee <dilee@nvidia.com> [swarren: Applied same change to headphone widgets] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-07Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds15-21/+21
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
2011-04-07Merge branch 'for-2.6.39' into for-2.6.40Mark Brown1-0/+16
2011-04-07ASoC: Set left channel volume update bits for WM8994Mark Brown1-0/+16
Ensures that we apply volume updates that don't affect the right channel. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-06ASoC: Add max98095 CODEC driverPeter Hsiang4-0/+2299
This patch adds the MAX98095 CODEC driver. Signed-off-by: Peter Hsiang <peter.hsiang@maxim-ic.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-05Merge branch 'for-2.6.40' of ↵Takashi Iwai22-605/+1302
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc
2011-04-04Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, UV: Fix kdump reboot x86, amd-nb: Rename CPU PCI id define for F4 sound: Add delay.h to sound/soc/codecs/sn95031.c x86, mtrr, pat: Fix one cpu getting out of sync during resume x86, microcode: Unregister syscore_ops after microcode unloaded x86: Stop including <linux/delay.h> in two asm header files
2011-04-03Merge branch 'for-2.6.39' into for-2.6.40Mark Brown5-9/+19
2011-03-31Fix common misspellingsLucas De Marchi15-21/+21
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31sound: Add delay.h to sound/soc/codecs/sn95031.cIngo Molnar1-0/+2
This is further fallout from delay.h removal from asm/apic.h and asm/dma.h: ca444564a947: x86: Stop including <linux/delay.h> in two asm header files Which caused this build failure: sound/soc/codecs/sn95031.c: In function ‘sn95031_get_mic_bias’: sound/soc/codecs/sn95031.c:153:2: error: implicit declaration of function ‘msleep’ [-Werror=implicit-function-declaration] Cc: Jean Delvare <khali@linux-fr.org> Cc: James E.J. Bottomley <James.Bottomley@suse.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> LKML-Reference: <20110325152014.297890ec@endymion.delvare> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-31ASoC: Use data based init for sn95031 DAPMLu Guanqun1-12/+5
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31ASoC: Use data based init for ak4535 DAPMLu Guanqun1-14/+5
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31ASoC: Use data based init for tlv320aic23 DAPMLu Guanqun1-14/+5
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31ASoC: Use data based init for wm8711 DAPMLu Guanqun1-13/+5
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31ASoC: Use data based init for wm8728 DAPMLu Guanqun1-13/+5
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31ASoC: Use data based init for wm9705 DAPMLu Guanqun1-13/+5
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>