| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
So we can apply the tlv320aic3xxx DT conversion.
|
|
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
|
|
The rt5682 driver switches its regmap to cache-only when the
device suspends and back to regular mode on resume. When the
jack detect interrupt fires rt5682_irq() schedules the jack
detect work. This can result in invalid reads from the regmap
in cache-only mode if the work runs before the device has
resumed:
[ 56.245502] rt5682 9-001a: ASoC: error at soc_component_read_no_lock on rt5682.9-001a for register: [0x000000f0] -16
Disable the jack detection interrupt during suspend and
re-enable it on resume. The driver already schedules the
jack detection work on resume, so any state change during
suspend is still handled.
This is essentially the same as commit f7d00a9be147 ("SoC:
rt5682s: Disable jack detection interrupt during suspend")
for the rt5682s.
Cc: stable@kernel.org
Signed-off-by: Matthias Kaehlcke <mka@chromium.org
Reviewed-by: Douglas Anderson <dianders@chromium.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org
Link: https://lore.kernel.org/r/20230516164629.1.Ibf79e94b3442eecc0054d2b478779cc512d967fc@changeid
Signed-off-by: Mark Brown <broonie@kernel.org
|
|
Add support for the DBVDD and LDO1-IN supplies.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20221102182002.255282-7-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On resume from suspend the following chain of events can happen:
A rt5682_resume() -> mod_delayed_work() for jack_detect_work
B DAPM sequence starts ( DAPM is locked now)
A1. rt5682_jack_detect_handler() scheduled
- Takes both jdet_mutex and calibrate_mutex
- Calls in to rt5682_headset_detect() which tries to take DAPM lock, it
starts to wait for it as B path took it already.
B1. DAPM sequence reaches the "HP Amp", rt5682_hp_event() tries to take
the jdet_mutex, but it is locked in A1, so it waits.
Deadlock.
To solve the deadlock, drop the jdet_mutex, use the jack_detect_work to do
the jack removal handling, move the dapm lock up one level to protect the
most of the rt5682_jack_detect_handler(), but not the jack reporting as it
might trigger a DAPM sequence.
The rt5682_headset_detect() can be changed to static as well.
Fixes: 8deb34a90f063 ("ASoC: rt5682: fix the wrong jack type detected")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220126100325.16513-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sometimes, end-users change the jack type under suspending,
so it needs to re-detect the combo jack type after resuming to
avoid any unexpected behaviors.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211109095450.12950-2-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A little pop can be heard obviously from HP while playing a silent.
This patch fixes it by using two functions:
1. Enable HP 1bit output mode.
2. Change the charge pump switch size during playback on and off.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211014094054.811-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The DAI clock is only used in I2S mode, to make it clear
and to fix clock resource release issue, we move CCF clock
related code to rt5682_i2c_probe to fix clock
register/unregister issue.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20210929054344.12112-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the initial driver we cancelled deferred work, but there is still a
window of time where a new interrupt could result in new deferred work
executed after the link is disabled, leading to an IO error. While we
did not see this IO error on RT5682-based platforms, the code pattern
is similar to the RT700 case where the IO error was noted, so the fix
is added for consistency.
This patch uses an 'disable_irq_lock' mutex to prevent new interrupts
from happening after the start of the system suspend. The choice of a
mutex v. a spinlock is mainly due to the time required to clear
interrupts, which requires a command to be transmitted by the
SoundWire host IP and acknowledged with an interrupt. The
'interrupt_callback' routine is also not meant to be called from an
interrupt context.
An additional 'disable_irq' flag prevents race conditions where the
status changes before the interrupts are disabled, but the workqueue
handling status changes is scheduled after the completion of the
system suspend. On resume the interrupts are re-enabled already by the
io_init routine so we only clear the flag.
The Fixes tag points to a 5.10 commit, there's no need to propagate
this change to earlier upstream versions.
BugLink: https://github.com/thesofproject/linux/issues/2943
Fixes: 4a55000722d7 ('ASoC: codecs: rt*.c: remove useless pointer cast')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210614180815.153711-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch keeps the delay time (50 ms) for jack detection and zero delay time for the button press.
This patch improves the reaction of the button press.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20210309085827.32032-1-shumingf@realtek.com
Tested-by Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The resume operation relies on multiple transactions to synchronize
the regmap state, make sure the timeout is one order of magnitude
larger than an individual transaction, so that timeouts of failed
transactions are detected first.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210115061651.9740-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The patch adds a new property to set the DMIC clock driving.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20201113055400.11242-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The (new?) style of clk registration uses clk_hw based APIs so that we
can more easily see the difference between clk providers and clk
consumers. Use the clk_hw based APIs to do this and migrate to devm for
the clkdev creation so that we can reduce the amount of code.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200804000531.920688-4-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
PLL2 of rt5682 only supports the freq conversion for 48000Hz
sample rate so far, this patch lets it support 44100Hz.
Signed-off-by: derek.fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/1591938925-1070-3-git-send-email-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With SND_SOC_AMD_RV_RT5682_MACH using the i2c version of the
driver, we can easily get a build failure when I2C is built-in
but soundwire is not:
WARNING: unmet direct dependencies detected for SND_SOC_RT5682
Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && (I2C [=y] || SOUNDWIRE [=m]) && (SOUNDWIRE [=m] || !SOUNDWIRE [=m]) && (I2C [=y] || !I2C [=y])
Selected by [y]:
- SND_SOC_AMD_RV_RT5682_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_ACP3x [=y] && I2C [=y] && CROS_EC [=y]
Selected by [m]:
- SND_SOC_RT5682_SDW [=m] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SOUNDWIRE [=m] && (I2C [=y] || !I2C [=y])
Rework the driver to have three separate modules, with the
main driver just dealing with the common bits and the actual
initialization as part of i2c and sdw specific modules.
The conversion is fairly mechanical to keep it easy to review,
i.e. it moves code around with the minimal required renaming
and changes.
Fixes: 6b8e4e7db3cd ("ASoC: amd: Add machine driver for Raven based platform")
Fixes: fd443a20c2f0 ("ASoC: rt5682: fix I2C/Soundwire dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200528091851.2889754-1-arnd@arndb.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.7
|
|
The cycle time of FIFO clock should increase 2 times to avoid
the random recording noise issue.
This setting could apply to all known situations in i2s mode.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200317073308.11572-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds the soundwire support for ALC5682.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200219102858.20166-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a need to use RT5682 as DAI clock master for other codecs
within a platform, which means that the DAI clocks are required to
remain, regardless of whether the RT5682 is actually running
playback/capture.
The RT5682 CCF basic functions are implemented almost by the existing
internal functions and asoc apis. It needs a clk provider (rt5682 mclk)
to generate the bclk and wclk outputs.
The RT5682 CCF supports and restricts as below:
1. Fmt of DAI-AIF1 must be configured to master before using CCF.
2. Only accept a 48MHz clk as the clk provider.
3. Only provide a 48kHz wclk and a set of multiples of wclk as bclk.
There are some temporary limitations in this patch until a better
implementation.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/1582033912-6841-1-git-send-email-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Enable RT5682 PLL2 function to implement the more complex
frequency conversion.
Signed-off-by: derek.fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/1581577510-1807-1-git-send-email-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The field "is_sdw" is used for distinguishing the driver whether is run
in soundwire mode or not. That will run the separated setting in runtime
to make sure the driver can be run with the same build between i2s mode
and soundwire mode.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/980b97e1ab9c4fab8bd345ec2158f1fd@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix typo which causes headphone no sound while using BCLK
as PLL source.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We change the settings while HP power-up for better performance.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This is the initial codec driver for rt5682.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
