summaryrefslogtreecommitdiff
path: root/sound/soc/atmel/atmel_ssc_dai.c
AgeCommit message (Collapse)AuthorFilesLines
2016-07-07ASoC: atmel_ssc_dai: Fix DMA params for different SSCPeter Meerwald1-1/+1
follow-up patch from c706f2e55f ASoC: atmel_ssc_dai: distinguish the different SSC cpu_dai id is always 0, use platform_device id to distinguish DMA parameters of SSCs Signed-off-by: Peter Meerwald-Stadler <p.meerwald@bct-electronic.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-27ASoC: atmel_ssc_dai: read DSP mode A data on rising edges of bclkPeter Rosin1-2/+2
Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-02ASoC: atmel_ssc_dai: distinguish the different SSCSongjun Wu1-9/+18
Cpu_dai id always equals 0, can't distinguish the different SSC. Use platform_device id to record and distinguish the different SSC. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-04ASoC: atmel_ssc_dai: Correct misuse of 0x%<decimal>Joe Perches1-1/+1
Correct misuse of 0x%d in logging message. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-05Merge remote-tracking branches 'asoc/topic/atmel', 'asoc/topic/davinci', ↵Mark Brown1-4/+107
'asoc/topic/gpiod' and 'asoc/topic/intel' into asoc-next
2015-02-10ASoC: atmel_ssc_dai: Allow more ratesPeter Rosin1-4/+107
When the SSC acts as BCK master, use a ratnum rule to limit the rate instead of only doing the standard rates. When the SSC acts as BCK slave, allow any BCK frequency up to the SSC master clock, divided by either of 2, 3 or 6. Put a cap at 384kHz. Who's /ever/ going to need more than that? The divider of 2, 3 or 6 is selected based on the Serial Clock Ratio Considerations section from the SSC documentation: The Transmitter and the Receiver can be programmed to operate with the clock signals provided on either the TK or RK pins. This allows the SSC to support many slave-mode data transfers. In this case, the maximum clock speed allowed on the RK pin is: - Peripheral clock divided by 2 if Receiver Frame Synchro is input - Peripheral clock divided by 3 if Receiver Frame Synchro is output In addition, the maximum clock speed allowed on the TK pin is: - Peripheral clock divided by 6 if Transmit Frame Synchro is input - Peripheral clock divided by 2 if Transmit Frame Synchro is output Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-09Merge remote-tracking branches 'asoc/topic/ad193x', 'asoc/topic/alc5632', ↵Mark Brown1-37/+71
'asoc/topic/atmel' and 'asoc/topic/au1x' into asoc-next
2015-02-04Merge remote-tracking branches 'asoc/topic/ad193x', 'asoc/topic/alc5632', ↵Mark Brown1-37/+71
'asoc/topic/atmel' and 'asoc/topic/au1x' into asoc-next
2015-01-30ASoC: atmel_ssc_dai: only clean PDC when using PDCBo Shen1-9/+11
Only using PDC, it needs to clean PDC registers. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-30ASoC: atmel_ssc_dai: refactor the startup and shutdownBo Shen1-17/+11
In startup function, enable ssc clock and in shutdown function, disable clock. And also remove disable ssc in shutdown function, as ssc is disabled in prepare function. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-30ASoC: atmel_ssc_dai: fix the setting for DSP modeBo Shen1-3/+3
When SCC work in DSP A mode, the data outputs/inputs are shift out on falling edge, the frame sync are sample on the rising edge. Reported-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-30ASoC: atmel_ssc_dai: Support SND_SOC_DAIFMT_CBM_CFS on I2SPeter Rosin1-0/+48
Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27ASoC: atmel_ssc_dai: remove clock pin commentsBo Shen1-11/+1
As the clock can be get from TK/RK pin, so remove the comments. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27ASoC: atmel_ssc_dai: fix start event for I2S modeBo Shen1-14/+4
According to the I2S specification information as following: - WS = 0, channel 1 (left) - WS = 1, channel 2 (right) So, the start event should be TF/RF falling edge. Reported-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-12-08ASoC: atmel_ssc_dai/trivial: typo fixMatthieu Crapet1-1/+1
Signed-off-by: Matthieu Crapet <mcrapet@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-03ASoC: atmel_ssc_dai: Match the CMR divider only in full duplex.Peter Rosin1-1/+4
The CMR divider register is shared by playback and capture. The SSC driver therefore tries to enforce rules so that the needed register content do not conflict during simultaneous playback/capture. However, the implementation also prevents changing the register content in half-duplex scenarios, which is needed when using the OSS API. Thus, only lock the divider if there is a stream in the other direction. Fixes the below program to not fail with the atmel ssc dai in master mode. int main(void) { int fd; int format; int channels; int speed; if ((fd = open("/dev/dsp", O_WRONLY, 0)) == -1) { perror("open"); return 1; } format = AFMT_S16_LE; if (ioctl(fd, SNDCTL_DSP_SETFMT, &format) == -1) { perror("SNDCTL_DSP_SETFMT"); return 1; } channels = 2; if (ioctl(fd, SNDCTL_DSP_CHANNELS, &channels) == -1) { perror("SNDCTL_DSP_CHANNELS"); return 1; } speed = 22025; if (ioctl(fd, SNDCTL_DSP_SPEED, &speed) == -1) { perror("SNDCTL_DSP_SPEED"); return 1; } return 0; } Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-06-21ASoC: atmel_ssc_dai: enable fslen extension featureBo Shen1-16/+18
When SSC work as master, it will generate the frame sync signal. On old SoCs, it only supports frame sync length less or equal to 16bits, on newer SoCs, it supports frame sync length extension, which can support frame size larger than 16 bits. So, add this to make it supports playback 24/32 bits audio clips. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12ASoC: atmel_ssc_dai: make option to choose clockBo Shen1-4/+9
When SSC works in slave mode, according to the hardware design, the clock can get from TK pin, also can get from RK pin. So, add one parameter to choose where the clock from. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-04ASoC: atmel_ssc_dai: add dai trigger opsBo Shen1-1/+29
According to the SSC specifiation, it should be enabled after DMA is enabled. So, add trigger operation to make sure the right sequence. Signed-off-by: Bo Shen <voice.shen@atmel.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-14sound: Remove unnecessary semicolonsJoe Perches1-1/+1
These aren't necessary after switch and if blocks. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-04ASoC: atmel: disable error interruptBo Shen1-1/+1
As once the error interrupt is triggered, it can not be cleared. So, disable it. No side effect found while testing on sama5d3xek and at91sam9x5ek boards. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15ASoC: atmel-pcm-dma: move prepare for dma to dai prepareBo Shen1-0/+1
as prepare callback for dma is acctually access ssc register which better done in dai driver, so move it to dai prepare callback function Signed-off-by: Bo Shen <voice.shen@atmel.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15ASoC: atmel_ssc_dai: add error mask defineBo Shen1-0/+2
add error mask define, which will be used when execute DMA transfer Signed-off-by: Bo Shen <voice.shen@atmel.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15ASoC: atmel_ssc_dai: move set dma data to startup callbackBo Shen1-17/+16
move set dma data to startup callback function, if the set dma data exist in hw_params callback, so the dma data only usable when call hw_params, if want use it before hw_params callback, it will cause NULL pointer access oops Signed-off-by: Bo Shen <voice.shen@atmel.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-04-12Merge remote-tracking branch 'asoc/topic/component' into asoc-nextMark Brown1-3/+8
2013-03-27ASoC: switch over to use snd_soc_register_component() on atmel sscKuninori Morimoto1-3/+8
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-04ASoC: atmel: Add slave mode support to SSC in DSP Mode AZoltan Puskas1-0/+43
Add previously unsupported slave mode to the SSC peripheral when using DSP/PCM Mode A format on the Atmel ARM platform. Signed-off-by: Zoltan Puskas <zpuskas@dension.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-04ASoC: atmel_ssc_dai: correct sequence when unloadBo Shen1-1/+1
correct the sequence when unload this module Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-04ASoC: atmel_ssc_dai: remove error set private dataBo Shen1-10/+0
ssc private data has been set in ssc driver, this cause the error private data set to ssc, remove it Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-24ASoC: atmel-soc: make it buildable on other architecturesJoachim Eastwood1-2/+0
Not very useful on non AT91/AVR32 platforms but it provides more build coverage and prepares for ARM multiplatform. Also fixes a couple of format type warnings. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-02ASoC: atmel-pcm: dma support based on pcm dmaengineBo Shen1-2/+15
Specify overrun bit in interrupt mask Add dmaengine specific routines Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> [voice.shen@atmel.com: adapt to soc dmaengine framework] Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-02ASoC: atmel-pcm: split into two fileBo Shen1-2/+2
This patch is split original atmel-pcm.c into new atmel-pcm.c and atmel-pcm-pdc.c two files. The new atmel-pcm.c is the share routine while will be used for pdc or dma transfer. Using SND_ATMEL_SOC_PDC to select using PDC for audio transfer Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-16ASoC: atmel-ssc-dai: register dai and pcm directlyBo Shen1-118/+39
change the method for register dai and pcm - let the atmel-ssc-dai no longer as a standalone platform device - remap ssc and then register dai directly - register pcm from dai directly - modify the code which related with this change Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-25ASoC: Convert atmel directory to module_platform_driverAxel Lin1-11/+1
Factor out some boilerplate code. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23ASoC: Constify snd_soc_dai_ops structsLars-Peter Clausen1-1/+1
Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure") introduced the possibility to have constant DAI ops structures, yet this is barley used in both existing drivers and also new drivers being submitted, although none of them modifies its DAI ops structure. The later is not surprising since existing drivers are often used as templates for new drivers. So this patch just constifies all existing snd_soc_dai_ops structs to eliminate the issue altogether. The patch was generated with the following coccinelle semantic patch: // <smpl> @@ identifier ops; @@ -struct snd_soc_dai_ops ops = +const struct snd_soc_dai_ops ops = { ... }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-10sound/atmel_ssc_dai: add a missing space to an error messageUwe Kleine-König1-1/+1
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-06Merge branch 'for-3.0' into for-3.1Mark Brown1-2/+3
2011-06-03ASoC: atmel_ssc: Don't try to free ssc if request failedJoachim Eastwood1-2/+3
We should only call ssc_free() when ssc_request() succeeds or bad things will happen. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-26ASoC: atmel_ssc_dai: fix ssc error pathNicolas Ferre1-3/+1
We do not have to free a resource that is not allocated yet. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2010-08-18ASoC: Add simplfied device registration for Atmel SSC devicesMark Brown1-3/+54
Since the SSC is already being registered as a device under arch and the DMA and SSC hardware are pretty much the same provide a simplified device registration function for the Atmel SSC which will add the ASoC-specific devices within the ASoC code, parenting the SSC device off the actual SSC device. Also use it in the sam9g20-ek driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12ASoC: multi-component - ASoC Multi-Component SupportLiam Girdwood1-25/+72
This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-06-07ASoC: atmel: trivial code cleanupWan ZongShun1-1/+0
Remove break after return, it is not needed. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-04-05ALSA: ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_streamDaniel Mack1-3/+3
This fixes a memory corruption when ASoC devices are used in full-duplex mode. Specifically for pxa-ssp code, where this pointer is dynamically allocated for each direction and destroyed upon each stream start. All other platforms are fixed blindly, I couldn't even compile-test them. Sorry for any breakage I may have caused. [Note that this is a backported version for 2.6.34. Upstream commit is fd23b7dee] Signed-off-by: Daniel Mack <daniel@caiaq.de> Reported-by: Sven Neumann <s.neumann@raumfeld.com> Reported-by: Michael Hirsch <m.hirsch@raumfeld.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-05ASoC: make ops a pointer in 'struct snd_soc_dai'Eric Miao1-21/+12
Considering the fact that most cpu_dai or codec_dai are using a same 'snd_soc_dai_ops' for several similar interfaces, 'ops' would be better made a pointer instead, to make sharing easier and code a bit cleaner. The patch below is rather preliminary since the asoc tree is being actively developed, and this touches almost every piece of code, (and possibly many others in development need to be changed as well). Building of all codecs are OK, yet to every SoC, I didn't test that. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-03ALSA: ASoC: email - update email addresses.Liam Girdwood1-1/+1
This just updates my email address on some drivers I'd forgotten in a previous patch. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ALSA: ASoC - Fix wrong section typesTakashi Iwai1-1/+1
The module init entries should be __init instead of __devinit. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-09ASoC: Fix typos in Atmel module registrationMark Brown1-2/+3
I wish I had boards which work with unmodified kernels :/ Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-09ASoC: Register platform DAIsMark Brown1-0/+11
Register all platform DAIs with the core. In line with current behaviour this is done at module probe time rather than when the devices are probed (since currently that only happens as the entire ASoC card is registered except for those drivers that currently implement some kind of hotplug). Since the core currently ignores DAI registration this has no practical effect. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-03ASoC: Remove platform device from DAI suspend and resume operationsMark Brown1-4/+2
None of the DAIs use it except s3c2412-i2s which only uses it for dev_() printouts. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-29 22:37:57 +0300