| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit d5f8458e34a331e5b228de142145e62ac5bfda34 upstream.
The tasdev_load_calibrated_data() function expects the calibration data
values in the cali_data buffer as R0, R0Low, InvR0, Power, TLim which
is not the same as what tas2563_save_calibration() writes to the buffer.
Reorder the EFI variables in the tas2563_save_calibration() function
to put the values in the buffer in the correct order.
Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://patch.msgid.link/20250829160450.66623-2-soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e5a00dafc7e06ab1b20fd4c1535cfa9b9940061e upstream.
Before conversion to unify the calibration data management, the
tas2563_apply_calib() function performed the big endian conversion and
wrote the calibration data to the device. The writing is now done by the
common tasdev_load_calibrated_data() function, but without conversion.
Put the values into the calibration data buffer with the expected
endianness.
Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://patch.msgid.link/20250829160450.66623-1-soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 051b02b17a8b383ee033db211f90f24b91ac7006 upstream.
Add a PCI quirk to enable microphone detection on the headphone jack of
TongFang X6AR5xxY and X6FR5xxY devices.
Signed-off-by: Aaron Erhardt <aer@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250826141054.1201482-1-aer@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bcd6659d4911c528381531472a0cefbd4003e29e upstream.
It was reported that HP EliteDesk 800 G4 DM 65W (SSID 103c:845a) needs
the similar quirk for enabling HDMI outputs, too. This patch adds the
corresponding quirk entry.
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250901115009.27498-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eafae0fdd115a71b3a200ef1a31f86da04bac77f upstream.
The HP EliteBook x360 830 G6 and HP EliteBook 830 G6 have
Realtek HDA codec ALC215. It needs the ALC285_FIXUP_HP_GPIO_LED
quirk to enable the mute LED.
Cc: <stable@vger.kernel.org>
Signed-off-by: Evgeniy Harchenko <evgeniyharchenko.dev@gmail.com>
Link: https://patch.msgid.link/20250815095814.75845-1-evgeniyharchenko.dev@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3f4422e7c9436abf81a00270be7e4d6d3760ec0e upstream.
During the conversion to unify the calibration data management, the
reference to tasdevice_priv was wrongly set to h->hda_priv instead of
h->priv. This resulted in memory corruption and crashes eventually.
Unfortunately it's a void pointer, hence the compiler couldn't know
that it's wrong.
Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1248270
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250820051902.4523-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dbe05428c4e54068a86e7e02405f3b30b1d2b3dd ]
Several months ago, Joshua Grisham submitted a patch [1]
for several ALC298 based sound cards.
The entry for the LG gram 16 in the alc269_fixup_tbl only matches the
Subsystem ID for the 16Z90R-Q and 16Z90R-K models [2]. My 16Z90R-A has a
different Subsystem ID [3]. I'm not sure why these IDs differ, but I
speculate it's due to the NVIDIA GPU included in the 16Z90R-A model that
isn't present in the other models.
I applied the patch to the latest Arch Linux kernel and the card was
initialized as expected.
[1]: https://lore.kernel.org/linux-sound/20240909193000.838815-1-josh@joshuagrisham.com/
[2]: https://linux-hardware.org/?id=pci:8086-51ca-1854-0488
[3]: https://linux-hardware.org/?id=pci:8086-51ca-1854-0489
Signed-off-by: Thomas Croft <thomasmcft@gmail.com>
Link: https://patch.msgid.link/20250804151457.134761-2-thomasmcft@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a409c60111e6bb98fcabab2aeaa069daa9434ca0 ]
The 'sprintf' call in 'add_tuning_control' may exceed the 44-byte
buffer if either string argument is too long. This triggers a compiler
warning.
Replaced 'sprintf' with 'snprintf' to limit string lengths to prevent
overflow.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506100642.95jpuMY1-lkp@intel.com/
Signed-off-by: Lucy Thrun <lucy.thrun@digital-rabbithole.de>
Link: https://patch.msgid.link/20250610175012.918-3-lucy.thrun@digital-rabbithole.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1adcbdf54f76e1004bdf71df4eb1888c26e7ad06 ]
Although the jack polling is canceled at shutdown in
snd_hda_codec_shutdown(), it might be still re-triggered when the work
is being processed at cancel_delayed_work_sync() call. This may
result in the unexpected hardware access that should have been already
disabled.
For assuring to stop the jack polling, clear codec->jackpoll_interval
at shutdown.
Reported-by: Joakim Zhang <joakim.zhang@cixtech.com>
Closes: https://lore.kernel.org/20250619020844.2974160-4-joakim.zhang@cixtech.com
Tested-by: Joakim Zhang <joakim.zhang@cixtech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250623131437.10670-2-tiwai@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5f7e54b23e4d253eff3b10b12d6fa92d28d7dddc ]
We used to call directly hda_jackpoll_work() from a couple of places
for updating the jack and notify to user-space, but this makes rather
the code flow fragile. Namely, because of those direct calls,
hda_jackpoll_work() uses snd_hda_power_up_pm() and *_down_pm() calls
instead of the standard snd_hda_power_up() and *_down() calls. The
latter pair assures the runtime PM resume sync, so it can avoid the
race against the PM callbacks gracefully, while the former pair may
continue if called concurrently, hence it may race (by design).
In this patch, we change the call pattern of hda_jackpoll_work(); now
all callers are replaced with the standard snd_hda_jack_report_sync()
and the additional schedule_delayed_work().
Since hda_jackpoll_work() is called only from the associated work,
it's always outside the PM code path, and we can safely use
snd_hda_power_up() and *_down() there instead. This allows us to
remove the racy check of power-state in hda_jackpoll_work(), as well
as the tricky cancel_delayed_work() and rescheduling at
hda_codec_runtime_suspend().
Reported-by: Joakim Zhang <joakim.zhang@cixtech.com>
Closes: https://lore.kernel.org/20250619020844.2974160-1-joakim.zhang@cixtech.com
Tested-by: Joakim Zhang <joakim.zhang@cixtech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250623131437.10670-4-tiwai@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6eda9429501508196001845998bb8c73307d311a ]
add firmware information in the .modinfo section, so that userspace
tools can find out firmware required by cs35l41/cs35l56 kernel module
Signed-off-by: GalaxySnail <me@glxys.nl>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250624101716.2365302-2-me@glxys.nl
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0db77eccd964b11ab2b757031d1354fcc5a025ea upstream.
Framework Laptop 13 (AMD Ryzen AI 300) requires the same quirk for
headset detection as other Framework 13 models.
Signed-off-by: Christopher Eby <kreed@kreed.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250810030006.9060-1-kreed@kreed.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b26e2afb3834d4a61ce54c8484ff6014bef0b4b7 upstream.
Add a PCI quirk to enable microphone input on the headphone jack on
the HONOR BRB-X M1010 laptop.
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250811132716.45076-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a9dec0963187d05725369156a5e0e14cd3487bfb upstream.
My friend have Victus 16-d1xxx with board ID 8A26, the existing quirk
for Victus 16-d1xxx wasn't working because of different board ID
Tested on Victus 16-d1015nt Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250729181848.24432-4-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 956048a3cd9d2575032e2c7ca62803677357ae18 upstream.
The mute led on this laptop is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the device.
Tested on Victus 16-S0063NT Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250729181848.24432-2-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bd7814a4c0fd883894bdf9fe5eda24c9df826e4c upstream.
The mute led on this laptop is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the device.
Tested on Victus 16-r1xxx Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250725151436.51543-2-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9f320dfb0ffc555aa2eac8331dee0c2c16f67633 ]
There are a couple of cases where the error is ignored or the error
code isn't propagated in ca0132_alt_select_out(). Fix those.
Fixes: def3f0a5c700 ("ALSA: hda/ca0132 - Add quirk output selection structures.")
Link: https://patch.msgid.link/20250806094423.8843-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
this patch is to fix my previous Commit <e5182305a519> i have fixed mute
led but for by This patch corrects the coefficient mask value introduced
in commit <e5182305a519>, which was intended to enable the mute LED
functionality. During testing, multiple values were evaluated, and
an incorrect value was mistakenly included in the final commit.
This update fixes that error by applying the correct mask value for
proper mute LED behavior.
Tested on 6.15.5-arch1-1
Fixes: e5182305a519 ("ALSA: hda/realtek: Enable Mute LED on HP OMEN 16 Laptop xd000xx")
Signed-off-by: SHARAN KUMAR M <sharweshraajan@gmail.com>
Link: https://patch.msgid.link/20250722172224.15359-1-sharweshraajan@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The mute LED on the HP Pavilion Laptop 15-eg0xxx,
which uses the ALC287 codec, didn't work.
This patch fixes the issue by enabling the ALC287_FIXUP_HP_GPIO_LED quirk.
Tested on a physical device, the LED now works as intended.
Signed-off-by: Dawid Rezler <dawidrezler.patches@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250720154907.80815-2-dawidrezler.patches@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The mute led on this laptop is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the device.
Tested on my Victus 15-fa0xxx Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250717212625.366026-2-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ASUS ROG Strix G712LWS (PCI SSID 1043:1a83) requires the quirk for
ALC294 headset mode in order to make the speaker and headset I/O
working properly.
Cc: <stable@vger.kernel.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220334
Link: https://patch.msgid.link/20250715062906.11857-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Lenovo Yoga Book 9i GenX has the wrong values in the cirrus,dev-index
_DSD property. Add a fixup for this model to ignore the property and
hardcode the index from the I2C bus address.
The error in the cirrus,dev-index property would prevent the second amp
instance from probing. The component binding would never see all the
required instances and so there would not be a binding between
patch_realtek.c and the cs35l56 driver.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: Brian Howard <blhoward2@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220228
Link: https://patch.msgid.link/20250714110154.204740-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Support mute LED on keyboard for Lenovo Yoga series products with
Realtek ALC287 chipset.
Tested on Lenovo Slim Pro 7 14APH8.
[ slight comment cleanup by tiwai ]
Signed-off-by: Jackie Dong <xy-jackie@139.com>
Link: https://patch.msgid.link/20250714094655.4657-1-xy-jackie@139.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The mute led on this laptop is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the device.
Tested on Victus 16-r0xxx Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250710131812.27509-1-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Positivo K116J is equipped with ALC269VC, and needs a fix to make
the headset mic to work.
Also must to limits the internal microphone boost.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20250707114537.8291-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We will copy calibration data from position behind to front.
We have created a variable (tmp_val) point on top of calibration data
buffer, and tmp_val[1] is max of node number in original calibration
data structure, it will be overwritten after first data copy,
so can't be used as max node number check in for loop.
So we create a new variable to save max of node number (tmp_val[1]),
used to check if max node number was reached in for loop.
And a point need to be increased to point at calibration data in node.
Data saved position also need to be increased one byte.
Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250707090513.1462-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ASUS ExpertBook B9403CVAR needs the ALC294_FIXUP_ASUS_HPE for the
headphones to work.
Closes: https://github.com/thesofproject/linux/issues/5472
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Tested-by: Anton Khirnov <anton@khirnov.net>
Link: https://patch.msgid.link/20250701133411.25275-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The mute led on this laptop is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the device.
Tested on my friend's Victus 15-fb2xxx Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250627203415.56785-2-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add codec IDs for several NVIDIA products with HDA controllers to the
snd_hda_id_hdmi[] patch table.
Signed-off-by: Daniel Dadap <ddadap@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/aF24rqwMKFWoHu12@ddadap-lakeline.nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The built-in mic of ASUS VivoBook X507UAR is broken recently by the fix
of the pin sort. The fixup ALC256_FIXUP_ASUS_MIC_NO_PRESENCE is working
for addressing the regression, too.
Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort")
Reported-by: Igor Tamara <igor.tamara@gmail.com>
Closes: https://bugs.debian.org/1108069
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Link: https://lore.kernel.org/CADdHDco7_o=4h_epjEAb92Dj-vUz_PoTC2-W9g5ncT2E0NzfeQ@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ASUS UM5606* models use the quirk to set up the bass speakers, but it
missed the mic-mute LED configuration. Other similar models have the
AMD ACP dmic, and the mic-mute is set up for that, but those models
don't have AMD ACP but rather built-in mics of Realtek codec, hence
the Realtek driver should set it up, instead.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220125
Link: https://patch.msgid.link/20250623151841.28810-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
HP EliteBook 6 G1a laptops use ALC236 codec and need the fixup
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF to make the mic/micmute LEDs
work.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Link: https://patch.msgid.link/20250623063023.374920-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The HP Pavilion Laptop 15-eg100 has Realtek HDA codec ALC287.
It needs the ALC287_FIXUP_HP_GPIO_LED quirk to enable the mute LED.
Signed-off-by: Yasmin Fitzgerald <sunoflife1.git@gmail.com>
Link: https://patch.msgid.link/20250621053832.52950-1-sunoflife1.git@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add audio quirks to fix speaker output and headset detection on the
following Clevo models:
- V350ENC
- V350WNPQ
- V540TU
- X560WNR
- X580WNS
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Link: https://patch.msgid.link/20250620204329.35878-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Positivo P15X is equipped with ALC269VC, and needs a fix to make
the headset mic to work.
Also must to limits the internal microphone boost.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20250619191215.17203-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The GA605K has similar audio hardware to the GA403U so apply the
same quirk.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Tested-by: Timofey Titovets <nefelim4ag@gmail.com>
Link: https://github.com/alsa-project/alsa-ucm-conf/issues/578
Link: https://patch.msgid.link/20250613145251.397500-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Like many Dell laptops, the 3.5mm port by default can not detect a
combined headphones+mic headset or even a pure microphone. This
change enables the port's functionality.
Signed-off-by: Jonathan Lane <jon@borg.moe>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250611193124.26141-2-jon@borg.moe
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The GU605C has similar audio hardware to the GU605M so apply the
same quirk.
Note that in the linked bugzilla there are two separate problems
with the GU605C. This patch fixes one of the problems, so I haven't
added a Closes: tag.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: Nick Karaolidis <nick@karaolidis.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220152
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250609102125.63196-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The built-in mic of ASUS VivoBook X513EA is broken recently by the
fix of the pin sort. The fixup ALC256_FIXUP_ASUS_MIC_NO_PRESENCE
is working for addressing the regression, too.
Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort")
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250610035607.690771-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Victus 15-fa1xxx
The mute led on those laptops is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the devices.
Tested on my Victus 16-s1011nt Laptop and my friend's Victus
15-fa1xxx. The LED behaviour works as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250609075943.13934-2-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Lenovo Thinkpad E15 with Conexant CX8070 codec seems causing ugly
noises after runtime-PM suspend. Disable the codec runtime PM as a
workaround.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220210
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250608091415.21170-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
For the classic snd_hda_intel driver, codec->card and bus->card point to
the exact same thing. When snd_card_diconnect() fires, bus->shutdown is
set thanks to azx_dev_disconnect(). card->shutdown is already set when
that happens but both provide basically the same functionality.
For the DSP snd_soc_avs driver where multiple codecs are located on
multiple cards, bus->shutdown 'shortcut' is not sufficient. One codec
card may be unregistered while other codecs are still operational.
Proper check in form of card->shutdown must be used to verify whether
the codec's card is being shut down.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141309.2943404-1-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add new pci id for AMD GPU display HD audio controller(device id- 0xab40).
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20250529053838.2350071-1-Vijendar.Mukunda@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Static 'struct regmap_irq_chip' is not modified so can be changed to
const for more safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250528194402.567062-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The driver's match data, nvidia_hda_data, is referred only locally,
and should be static. Also, as it's a read-only data, it can be
gracefully const, too.
Fixes: 4b214c9bbe26 ("ALSA: hda - Add new driver for HDA controllers listed via ACPI")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505230426.k8ruTgnr-lkp@intel.com/
Link: https://patch.msgid.link/20250522205252.4056-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The dev_pm_ops definition must be SYSTEM_SLEEP_PM_OPS() instead of
SET_SYSTEM_SLEEP_PM_OPS(); otherwise it leads compile warnings without
CONFIG_PM_SLEEP. The latest patch version I took was back to an old
macro (likely mistakenly), and I overlooked it at applying. Fix it
now.
Fixes: 4b214c9bbe26 ("ALSA: hda - Add new driver for HDA controllers listed via ACPI")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/20250522203020.1478369-1-rdunlap@infradead.org
Link: https://patch.msgid.link/20250522204624.1757-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Sync with the pending 6.15 fixes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.16
The changes in this release are quite large, mainly in drivers rather
than the core. This is partly due to cleanups that touch a lot of
drivers and partly due to several relatively large new drivers.
- Support for automatically enumerating DAIs from standards conforming
SoundWire SDCA devices, further work is required for these to be
useful in an actual card.
- Conversion of quite a few drivers to newer GPIO APIs.
- More helpers and cleanups from Mormimoto-san.
- Support for a wider range of AVS platforms.
- Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32,
Everest Semiconductor ES8389, Longsoon-1 AC'97 controllers, nVidia
Tegra264, Richtek ALC203 and RT9123 and Rockchip SAI controllers.
|
|
In commit d69d80484598 ("driver core: have match() callback in struct
bus_type take a const *"), the match bus callback was changed to have
the driver be a const pointer. Unfortunately that const attribute was
thrown away when container_of() is called, which is not correct and was
not caught by the compiler due to how container_of() is implemented.
Fix this up by correctly preserving the const attribute of the driver
passed to the bus match function which requires the hdac_driver match
function to also take a const pointer for the driver structure.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025052204-hyphen-thermal-3e72@gregkh
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
SPI and I2C into the tas2781_hda lib
Calibration data getting function for SPI and I2C HDA drivers are almost
same, which read the calibration data from UEFI. To put them into
tas2781_hda lib for code cleanup is more reasonable than to still keep
them in the codec driver. For tas2781 codec driver, there're two different
sources for calibrated data, one is from bin file, generated in factory
test, requested and read in codec driver side; the other is from user
space during device bootup.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250522014347.1163-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
