summaryrefslogtreecommitdiff
path: root/sound/pci/hda/patch_sigmatel.c
AgeCommit message (Collapse)AuthorFilesLines
2008-04-24[ALSA] Keep private TLV entry in vmaster itselfTakashi Iwai1-5/+3
Use a private array for TLV entries of virtual master controls instead of (supposed) static array. This cleans up the existing codes. Also, now vmaster assumes the simple dB-range TLV that is the only type it can handle. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-codec - Add "IEC958 Default PCM" switchTakashi Iwai1-1/+7
Added a new mixer switch to enable/disable the sharing of the default PCM stream with analog and SPDIF outputs. When "IEC958 Default PCM" switch is on, the PCM stream is routed both to analog and SPDIF outputs. This is the behavior in the earlier version. Turning this switch off has a merit for some codecs, though. Some codec chips don't support 24bit formats for SPDIF but only for analog outputs. In this case, you can use 24bit format by disabling this switch. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda: STAC927x power down inactive DACsMatthew Ranostay1-1/+23
On several laptops that have STAC9228 codecs have unused DACs, this powers them down to a D3 state. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] hda-intel - Fix PCM device number assignmentTakashi Iwai1-0/+1
In the current scheme, PCM device numbers are assigned incrementally in the order of codecs. This causes problems when the codec number is irregular, e.g. codec #0 for HDMI and codec #1 for analog. Then the HDMI becomes the first PCM, which is picked up as the default output device. Unfortuantely this doesn't work well with normal setups. This patch introduced the fixed device numbers for the PCM types, namely, analog, SPDIF, HDMI and modem. The PCM devices are assigned according to the corresponding PCM type. After this patch, HDMI will be always assigned to PCM #3, SPDIF to PCM #1, and the first analog to PCM #0, etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] HDA - Add support for the OQO Model 2Tobin Davis1-1/+12
This patch adds support for the OQO Model 2 Ultra Mobile PC. Signed-off-by: Tobin Davis <tdavis@dsl-only.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-01-31[ALSA] hda: fix Mic in as outputMatthew Ranostay1-8/+16
Some laptop has an internal analog microphone that is 'fixed'. This patch prevents creating a 'Mic In as Output' switch for ports that can't be outputs. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: Add GPIO mute support to STAC9205Matthew Ranostay1-17/+45
Support added for detecting HP jack presence via GPIO on several laptop docks. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Control SPDIF as slaveTakashi Iwai1-0/+1
Add SPDIF playback switch to the slave element list so that it can be toggled via the master control as well. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: STAC92xx Line In/Mic as output checkMatthew Ranostay1-7/+25
This patch checks to see the Line In/Mic port have the ability to do output before creating the the control switches. The 92hd71bxx series of codecs has this issue with the port 0xe, which only allows input. Signed-off-by: Matthew Ranostay <mranostay@embededalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: STAC9205 GPIO line fixMatthew Ranostay1-4/+4
Fixed issue that the incorrect GPIO line was being pulled high for some STAC9205 based laptops. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: Add dynamic mono mixer support for STAC92xx codecsMatthew Ranostay1-10/+51
Allows for dynamically creating mono out mixer controls and well as mono mux controls. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: Mono mux mixer supportMatthew Ranostay1-1/+82
Add support for the mono mux on several 92HD7xxx codecs. Creates a dynamic mixer for the mux selection. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-intel - Add workarounds for STAC codecsTakashi Iwai1-0/+12
Some machines with STAC codecs seem to have problems (e.g. no audible playback) when the delay in codec-read routine is too short. I still don't figure out which command sequence causes this problem (due to lack of test hardware), but it's known that increasing the delay fixes. So, added a stupid workaround here temporarily... Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-code - Clean up STAC GPIO enablement codeTakashi Iwai1-43/+13
There are two similar GPIO-enablement codes in patch_sigmatel.c. Let's clean up. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: Add new STAC9205 PCI_QUIRKMatthew Ranostay1-0/+3
Added a new STAC 9205 quirk for Vostro 1500. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: 92HD7XXX power management supportMatthew Ranostay1-8/+83
Added support for advanced power management support for output ports on 92HD7xxx family of codecs. Inactive output ports are powered down when the pin sense doesn't detect a connection, and powered back up when a connection is sensed. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add virtual master controlsTakashi Iwai1-0/+48
Add master controls using vmaster to codecs that have no real hardware master volume registers. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: STAC9228 VT fixesMatthew Ranostay1-2/+4
Moved 2 systems PCI_QUIRK values to STAC_DELL_BIOS. Also the second front HP jack is incorrect defined in the BIOS VT's for some laptops, this patch corrects this. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: 92HD71BXX Mono Mute SupportMatthew Ranostay1-4/+4
Added a mono output mute mixer for the 92hd71bxx family of codecs, this also removes the need for the mono out node to explicitly unmuted in the core init. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Remove sound/driver.hTakashi Iwai1-1/+0
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: Dynamically create digital gain mixersMatthew Ranostay1-31/+20
Dynamically create digital gain mixers for dmics that have out-amp support. Also some 92HD73xx's codecs don't have DMIC gains, so this also prevents creating dead mixers. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: STAC927x VREF fixMatthew Ranostay1-0/+3
Some laptops incorrectly assume the front input jack as a line in instead of a microphone in. Which in turn disables the voltage reference, in which non-amplified input is not possible. This patch enables VREF80 for the input jack. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Fix invalid access to non-existing dmux on STACTakashi Iwai1-18/+28
The digital mux on STAC codecs doesn't always exist although the driver builds dmux enum mixer elements unconditionally. Now the driver creates 'digital input source' mixer elements only when dmux is available. Also, the patch adds the missing dmux definition for STAC925x. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: STAC927x DMIC CleanupMatthew Ranostay1-50/+50
Cleaned up STAC927x and added several subsystem id's for more laptops. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: Added more 92HD71 codecsMatthew Ranostay1-6/+62
Added more codecs to the 92HD71 family, as well as support for several that don't have an analog mixer. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: 92HD73 DMIC AmpsMatthew Ranostay1-6/+6
Changed hardware gain mixers for the digital mic's from HDA_OUTPUT to HDA_INPUT. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: Added STAC92HD73 supportMatthew Ranostay1-20/+387
Added support for new STAC92HD73 family of codecs. Additionally added features for multiple analog loopbacks, and multiple dmux mixers. Regression testing for the analog loopback changes for STAC9205 and STAC9274D completed with any issues, as well for the dmux changes. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Revert volume knob controls in STAC codecsTakashi Iwai1-48/+0
Volume knob controls with STAC codecs seem to cause problems with some devices. Volumes change very slowly or silent suddenly. It's likely due to conflict between the software and the hardware volume knob setup. Since we'll have a virtual master control in future, it's safer to remove this control completely right now. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Check value range in ctl callbacksTakashi Iwai1-6/+44
Check the value ranges in ctl put callbacks properly so that invalid values won't be stored or written to registers. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Avoid wrong speaker-auto mute via mic jackJiang Zhe1-5/+19
When a mic jack is set up as the multiple I/O, it may issue the automute function wrongly. This patch fixes the wrong automute detection. Signed-off-by: Jiang Zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add workaround for multiple HPsJiang Zhe1-0/+32
Dell laptops have multiple HP jacks that can be used for multi-channel outputs. The current auto pincfg handles the speaker as the primary output and thus cannot handle the multi-channel configuration for such cases. This patch adds a workaround to fix this issue by swapping the HP and speaker during multi-channel setup routines. Signed-off-by: Jiang Zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Update dell-m82 model pin configJiang Zhe1-2/+2
Updated dell-m82 model pin config table. The old config doesn't work with Dell 1210 and co. Signed-off-by: Jiang Zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: STAC9228 Subsystem updateMatthew Ranostay1-2/+4
Added more laptops subsystem id's that have STAC9228 DMIC support. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: STAC92HD71 codec mixerMatthew Ranostay1-5/+28
Added analog loopback support and missing ADC capture mixer for the STAC92HD71 codec family. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: Added new IDT codec familyMatthew Ranostay1-0/+149
Added initial support for the STAC92HD71BXX family of codecs. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: STAC9228 DMICMatthew Ranostay1-3/+10
Added support for the dmics and enabled EAPD for several laptops with STAC9228 cards. Signed-off-by: Matthew Ranostay <mranostay@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: STAC9228 updated DMUX nidMatthew Ranostay1-1/+1
Changed the dmux for STAC9228 from ADC1MUX to ADC0MUX to avoid confusion. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: Add dmux to STAC 9228Matthew Ranostay1-8/+13
Added a dmux to the STAC9228 cards with DMIC support. And added a STAC_DIGITAL_INPUT_SOURCE macro for repeating mixer code. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add STAC9228 DMIC supportMatthew Ranostay1-3/+15
Added the missing STAC9228 DMIC support. Also added a new vendor id tag for IDT. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-11-20[ALSA] hda-codec - Revert volume knob controls in STAC codecsTakashi Iwai1-56/+1
Volume knob controls with STAC codecs seem to cause problems with some devices. Volumes change very slowly or silent suddenly. It's likely due to conflict between the software and the hardware volume knob setup. Since we'll have a virtual master control in future, it's safer to remove this control completely right now. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-23[ALSA] hda-codec - Fix conflict of Master volume in STAC92xx codecTakashi Iwai1-1/+5
The addition of volume knob as Master volume resulted in conflict with the existing one by stac92xx_auto_create_hp_ctls(). This patch fixes the conflict, and still keeps the Master control for codecs without volume knob as much as possible. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] hda-codec - Add array terminator for dmic in STAC codecTakashi Iwai1-6/+8
Reported by Jan-Marek Glogowski. The dmic array is passed to snd_hda_parse_pin_def_config() and should be zero-terminated. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] hda-codec - Fix STAC922x volume knob controlTakashi Iwai1-11/+13
Reported by zhejiang <zhe.jiang@intel.com> 'I found that STAC_VOLKNOB hardwired the KNOB nid to 0x24. It is okay for stac9205 and stac927x. But the VolumeKnob nid of stac9220-9221 is 0x16.' Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] hda-codec - Fix input_mux numbers for vaio stac92xxTakashi Iwai1-1/+1
My bad, I forgot to update the num_items field when added a new item to vaio_mux items table, so the last item 'PCM' disappeared. Now it has the right number 3. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Re-add quirk support for Dell XPS 1330 and Inspiron 1420Tim Gardner1-0/+2
Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Fix Gateway laptops with STAC9200Takashi Iwai1-2/+19
Fix the output of Gateway laptops with STAC9200 codec chip. They require the EAPD control for some pins. These pins shouldn't be powered down. To enable EAPD control, a new model 'gateway' was added to STAC9200. The known PCI SSIDs are included in the quirk list. The fix was originally suggested by Brian Hinz, in ALSA bug#2948. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda: More subsystem id BIOS changesMatthew Ranostay1-4/+3
More laptop BIOS changes the subsystem id for STAC9205 cards if the microphone is toggled on/off in the settings. The patch removes the old STAC_9205_M43xx and use STAC_9205_DELL_M43. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda: BIOS changing subsystem idMatthew Ranostay1-0/+2
Some laptop BIOS change the subsystem id for STAC9205 cards if the microphone isn't toggled on/off in the settings. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Fix wrong pin config order in STAC92xx dell modelsTakashi Iwai1-18/+18
The last patch to change/add Dell models have wrong pin config orders. This patch fixes the pin positions. Taken from ALSA bug#3319, https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3319 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Fix support for sigmatel codecs that have 2 or more ADCsMaxim Levitsky1-40/+57
1) Create seperate mixer controls for each ADC 2) Make number of substreams of capture PCM device be equal to number of ADCs Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-12 05:57:42 +0300