summaryrefslogtreecommitdiff
path: root/sound/drivers
AgeCommit message (Collapse)AuthorFilesLines
2015-06-26Merge tag 'sound-4.2-rc1' of ↵Linus Torvalds6-28/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "It was a busy development cycle at this time, as you can see a wide range of changes in diffstat. There are no big changes but many refactoring and improvements. Here we go some highlights: ALSA core: - Procfs codes were cleaned up to use seq_file - Procfs can be opt out via Kconfig (only for EXPERT) - Two types of jack API were unified finally; now both kctl and input jack devs are handled via a single function call. HD-audio: - Continued code restructuring for the future ASoC driver; now HDA controller driver is split to a core helper module. - Preliminary codes for Skylake audio support in HDA core. - Proper i915 gfx power well management for SKL & co - Enabled runtime PM as default for Intel HDMI/DP codecs - Newer Tegra chip supports - More quirks for Dell headsets, Alienware (with CA0132), etc. - A couple of DRM ELD helper API functions ASoC: - Support for loading ASoC topology maps from firmware, intended to be used to allow self-describing DSP firmware images to be built which can map controls added by the DSP to userspace without the kernel needing to know about individual DSP firmwares - Lots of refactoring to avoid direct access to snd_soc_codec where it's not needed supporting future refactoring - Big refactoring, cleanup and enhancement for the Wolfson ADSP driver - Cleanup series for TI TAS2552 and R-CAR drivers - Fixes and improvements on RT56xx codecs - Support for TI TAS571x power amplifiers - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs - Support for x86 systems with RT5650 and Qualcomm Storm - Support for Mediatek AFE (Audio Front End) unit - Other various small fixes to ASoC codec drivers Firewire: - Enhanced to allow non-blocking streams to use timestamp synchronization - Improve support for DM1500 and BeBoBv3 Misc: - Cleanup of old pci API functions over all PCI sound drivers - Fix long-standing regression of the old powermac i2c setup" * tag 'sound-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (533 commits) ALSA: pcm: Fix pcm_class sysfs output ALSA: hda-beep: Update authors dead email address ASoC: wm_adsp: Move DSP Rate controls into the codec ASoC: wm8995: Fix setting sysclk for WM8995_SYSCLK_MCLK2 case ALSA: hda: provide default bus io ops extended hdac ALSA: hda: add hda link cleanup routine ALSA: hda: add hdac_ext stream creation and cleanup routines ASoC: rsrc-card: remove unused ret ALSA: HDAC: move SND_HDA_PREALLOC_SIZE to core ASoC: mediatek: Add machine driver for rt5650 rt5676 codec ASoC: mediatek: Add machine driver for MAX98090 codec ASoC: mediatek: Add AFE platform driver ASoC: rsnd: remove io from rsnd_mod ASoC: rsnd: move rsnd_mod_is_working() to rsnd_io_is_working() ASoC: rsnd: don't use rsnd_mod_to_io() on snd_kcontrol ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_src_xxx() ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_ssi_xxx() ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_dma_xxx() ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_get_adinr() ASoC: rsnd: add common interrupt handler for SSI/SRC/DMA ...
2015-05-29ALSA: opl4: Fix / cleanup ifdef CONFIG_PROC_FSTakashi Iwai4-11/+7
Some are replaced with the new ifdef CONFIG_SND_PROC_FS. Some are removed by building opl4_proc.o conditionally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-29ALSA: dummy: Replace CONFIG_PROC_FS with CONFIG_SND_PROC_FSTakashi Iwai1-2/+2
Although there shouldn't be a problem in practice (the compiler should handle well), it's better to follow to the new Kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-29ALSA: aloop: Drop unnecessary ifdef CONFIG_PROC_FSTakashi Iwai1-8/+0
Since the compiler can optimize away the unused code, we can reduce the messy ifdef. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-26ALSA: dummy: make local data staticTakashi Iwai1-7/+7
Add missing prefix to make some local data static. Spotted by sparse: sound/drivers/dummy.c:159:20: warning: symbol 'model_emu10k1' was not declared. Should it be static? sound/drivers/dummy.c:165:20: warning: symbol 'model_rme9652' was not declared. Should it be static? .... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-12ALSA: drivers: pcsp: Fix printout of resolutionThomas Gleixner1-2/+2
The recent conversion of the hrtimer resolution failed to convert the printk format from %li to %u. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22sound: Use hrtimer_resolution instead of hrtimer_get_res()Thomas Gleixner1-9/+6
No point in converting a timespec now that the value is directly accessible. Get rid of the null check while at it. Resolution is guaranteed to be > 0. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: alsa-devel@alsa-project.org Link: http://lkml.kernel.org/r/20150414203500.799133359@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-03-09Merge branch 'for-linus' into for-nextTakashi Iwai1-0/+2
Merging the HD-audio fixes back to base devel branch for further working on it.
2015-03-06ALSA: opl3: small array underflowDan Carpenter1-0/+2
There is a missing lower bound check on "pitchbend" so it means we can read up to 6 elements before the start of the opl3_note_table[] array. Thanks to Clemens Ladisch for his help with this patch. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-12ALSA: seq: Define driver object in each driverTakashi Iwai2-39/+28
This patch moves the driver object initialization and allocation to each driver's module init/exit code like other normal drivers. The snd_seq_driver struct is now published in seq_device.h, and each driver is responsible to define it with proper driver attributes (name, probe and remove) with snd_seq_driver specific attributes as id and argsize fields. The helper functions snd_seq_driver_register(), snd_seq_driver_unregister() and module_snd_seq_driver() are used for simplifying codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: Include linux/uaccess.h and linux/bitopts.h instead of asm/*Takashi Iwai1-1/+1
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: Include linux/io.h instead of asm/io.hTakashi Iwai8-9/+8
Nowadays it's recommended. Replace all in a shot. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19ALSA: serial-u16550: Use setup_timer() and mod_timer()Takashi Iwai1-5/+3
No functional change, refactoring with the standard helpers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19ALSA: opl3: Use setup_timer() and mod_timer()Takashi Iwai2-10/+5
No functional change, refactoring with the standard helpers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19ALSA: mtpav: Use setup_timer() and mod_timer()Takashi Iwai1-8/+4
No functional change, refactoring with the standard helpers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19ALSA: mpu401: Use setup_timer() and mod_timer()Takashi Iwai1-7/+4
No functional change, refactoring with the standard helpers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19ALSA: aloop: Use setup_timer() and mod_timer()Takashi Iwai1-2/+1
No functional change, refactoring with the standard helpers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19ALSA: dummy: use setup_timer and mod_timerRoman Kollar1-6/+4
Use setup_timer and mod_timer instead of structure assignments as it is the preferred way to setup and set the timer. Signed-off-by: Roman Kollar <rkollar@mail.muni.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-04ALSA: Deletion of checks before the function call "iounmap"Markus Elfring1-2/+1
The iounmap() function performs also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-02ALSA: ml403-ac97cr: Remove always NULL parameterLars-Peter Clausen1-7/+2
snd_ml403_ac97cr_pcm() takes a pointer to a pointer of a PCM where if this parameter is provided the newly allocated PCM is stored. All callers pass NULL though, so remove the parameter. This makes the code a bit cleaner and shorter. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-15Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds10-10/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-30ALSA: virmidi: Fix wrong error checkTakashi Iwai1-1/+1
While rewriting the code in the previous commit [316638a5030a: ALSA: virmidi: fixed code style issues], the error check was wrongly converted. This resulted an Oops. Fixes: 316638a5030a ('ALSA: virmidi: fixed code style issues') Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-29ALSA: virmidi: fixed code style issuesKyle Chamberlin1-8/+13
Fixed some minor code style issues and also removed some assignments inside of if conditionals. Signed-off-by: Kyle Chamberlin <kylechamberlin@project20million.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-11ALSA: vx: Fix missing kerneldoc parameter descriptionsTakashi Iwai1-0/+10
The file isn't processed, but it's not bad to fix beforehand. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-21ALSA: vx: Use snd_ctl_elem_info()Takashi Iwai1-27/+8
... and reduce the open codes. Also add missing const to text arrays. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-21ALSA: mts64: Use snd_ctl_elem_info()Takashi Iwai1-14/+4
... and reduce the open codes. Also add missing const to the text array. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-20ALSA: drivers: pcsp: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20ALSA: drivers: mpu401: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20ALSA: drivers: drop owner assignment from platform_driversWolfram Sang8-8/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-15ALSA: vx: Use nonatomic PCM opsTakashi Iwai4-92/+60
Rewrite VXpocket and VX222 drivers to use the new PCM nonatomic ops. The former irq tasklet is replaced with a threaded irq handler, and the tasklet for the PCM delayed start is simply merged into the normal PCM trigger, as well as the replacement of spinlock with mutex. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-12ALSA: drivers: Convert to snd_card_new() with a device pointerTakashi Iwai10-33/+23
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-12ALSA: Drop unused name argument in snd_register_oss_device()Takashi Iwai1-3/+1
The last argument, name, of snd_oss_register_device() is nowhere referred in the function in the current code. Let's drop it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-10ALSA: Replace with IS_ENABLED()Takashi Iwai1-1/+1
Replace the lengthy #if defined(XXX) || defined(XXX_MODULE) with the new IS_ENABLED() macro. The patch still doesn't cover all ifdefs. For example, the dependency on CONFIG_GAMEPORT is still open-coded because this also has an extra dependency on MODULE. Similarly, an open-coded ifdef in pcm_oss.c and some sequencer-related stuff are left untouched. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-07ALSA: pcsp: Include appropriate header file in pcsp/pcsp_input.cRashika Kheria1-0/+1
Include appropriate header file in drivers/pcsp/pcsp_input.c because it defines function whose prototype definitions are present in drivers/pcsp/pcsp_input.h. This eliminates the following warning in drivers/pcsp/pcsp_input.c: sound/drivers/pcsp/pcsp_input.c:42:6: warning: no previous prototype for ‘pcspkr_stop_sound’ [-Wmissing-prototypes] sound/drivers/pcsp/pcsp_input.c:80:5: warning: no previous prototype for ‘pcspkr_input_init’ [-Wmissing-prototypes] sound/drivers/pcsp/pcsp_input.c:110:5: warning: no previous prototype for ‘pcspkr_input_remove’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-11-14ALSA: pcsp: Fix the order of input device unregistrationTakashi Iwai1-1/+1
The current code may access to the already freed object. The input device must be accessed and unregistered before freeing the top level sound object. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-29ALSA: pcsp: Fix initialization with nopcm=1Takashi Iwai1-1/+2
When nopcm=1 is set, some initializations based on hrtimer resolution might be bogus because the driver checks the resolution only when nopcm=0. Simply get the resolution always at first for fixing the bug. Spotted by coverity CID 139740. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-29ALSA: opl3: Fix possible negative array index accessTakashi Iwai1-0/+5
Spotted by coverity CID 115196. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-21ALSA: replace strict_strto*() with kstrto*()Jingoo Han1-1/+1
The usage of strict_strto*() is not preferred, because strict_strto*() is obsolete. Thus, kstrto*() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-21ALSA: vx_core: off by one in vx_read_status()Dan Carpenter1-1/+1
This code is older than git, and I haven't tested it, but if size == SIZE_MAX_STATUS then we would write one space past the end of the rmh->Stat[] array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-29ALSA: Remove the rest of *_set_drvdata(NULL) callsTakashi Iwai1-1/+0
A few calls are still left in parport drivers after this commit, which I'm not quite sure yet. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-23ALSA: virmidi: Remove redundant platform_set_drvdata()Sachin Kamat1-1/+0
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-23ALSA: serial-u16550: Remove redundant platform_set_drvdata()Sachin Kamat1-1/+0
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-23ALSA: pcsp: Remove redundant platform_set_drvdata()Sachin Kamat1-1/+0
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Stas Sergeev <stsp@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-23ALSA: mtpav: Remove redundant platform_set_drvdata()Sachin Kamat1-1/+0
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-23ALSA: mpu401: Remove redundant platform_set_drvdata()Sachin Kamat1-1/+0
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-23ALSA: ml403-ac97cr: Remove redundant platform_set_drvdata()Sachin Kamat1-1/+0
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-23ALSA: aloop: Remove redundant platform_set_drvdata()Sachin Kamat1-1/+0
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-29ALSA: pcm_format_to_bits strong-typed conversionEldad Zack1-1/+1
Add a function to handle conversion from snd_pcm_format_t to bitwise with proper typing. Change such conversions to use this function and silence sparse warnings. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-24ALSA: sound kconfig typoPavel Machek1-1/+1
Fix english in sound/drivers/Kconfig. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-12ALSA: add/change some comments describing function return valuesYacine Belkadi1-1/+5
script/kernel-doc reports the following type of warnings (when run in verbose mode): Warning(sound/core/init.c:152): No description found for return value of 'snd_card_create' To fix that: - add missing descriptions of function return values - use "Return:" sections to describe those return values Along the way: - complete some descriptions - fix some typos Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-21 21:57:21 +0300