summaryrefslogtreecommitdiff
path: root/sound/core/jack.c
AgeCommit message (Collapse)AuthorFilesLines
2013-11-14ALSA: jack: Unregister input device at disconnectionTakashi Iwai1-3/+16
The recent change in sysfs triggered a kernel WARNING at unloading a sound driver like WARNING: CPU: 3 PID: 2247 at fs/sysfs/group.c:214 sysfs_remove_group+0xe8/0xf0() sysfs group ffffffff81ab7b20 not found for kobject 'event14' for each jack instance. It's because the unregistration of jack input device is done in dev_free callback, which is called after snd_card_disconnect(). Since device_unregister(card->card_dev) is called in snd_card_disconnect(), the whole sysfs entries belonging to card->card_dev have been already removed recursively. Thus this results in a warning as input_unregister_device() yet tries to unregister the already removed sysfs entry. For fixing this mess, we need to unregister the jack input device at dev_disconnect callback so that it's called before unregistering the card->card_dev. Reviwed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-12ALSA: add/change some comments describing function return valuesYacine Belkadi1-2/+4
script/kernel-doc reports the following type of warnings (when run in verbose mode): Warning(sound/core/init.c:152): No description found for return value of 'snd_card_create' To fix that: - add missing descriptions of function return values - use "Return:" sections to describe those return values Along the way: - complete some descriptions - fix some typos Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-07ALSA: jack: Update documention to reflect other userspace interfacesMark Brown1-1/+4
Since this is a generic API which should support any userspace interface for reporting jacks update the documentation a little to make that a bit clearer. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-27ALSA: Use a define for the number of jack switch typesMark Brown1-2/+2
This is intended to facilitate the merge of the two jack detection mechanisms. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-01sound: Add module.h to the previously silent sound usersPaul Gortmaker1-0/+1
Lots of sound drivers were getting module.h via the implicit presence of it in <linux/device.h> but we are going to clean that up. So fix up those users now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-05ALSA: jack - Add "Line In" input jack constantsDavid Henningsson1-0/+1
Similar to Line Out, these constants form the base for future patches enabling input jack reporting for Line in jacks. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-21ALSA: fix one memory leak in sound jackLu Guanqun1-0/+1
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-20Merge branch 'topic/jack' into for-linusTakashi Iwai1-6/+65
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-17ALSA: Add support for key reporting via the jack interfaceMark Brown1-1/+59
Some devices provide support for detection of a small number of buttons on their jacks. One common implementation provides a single button, implemented by shorting the microphone to ground and detected along with microphone presence detection by detecting varying current draws on the microphone bias signal. Provide support for up to three buttons via the jack interface. These default to reporting BTN_n but an API is provided to allow these to be remapped to other keys by the machine driver where it knows what the keys are. More keys can be added with ease if required. This is only intended to support simple accessory button designs. If the interface is limiting then either creating a child device for the accessory or accessing the input device in the jack directly is recommended. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-17ALSA: Rename jack switch table in preparation for button supportMark Brown1-5/+6
Avoids confusion when we have button support. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-10ALSA: use card device as parent for jack input-devicesKay Sievers1-1/+1
This moves the jack devices from the PCI device into the ALSA card device, which makes it easier for userspace to find all devices belonging to a specific card while granting access to logged-in users. Jack input devices from sound cards can now simply be matched with udev by doing: SUBSYSTEM="input", SUBSYSTEMS="sound", ... ls -l /sys/devices/pci0000:00/0000:00:1b.0/sound/card0 controlC0 device -> ../../../0000:00:1b.0 id input10 input11 input8 input9 number pcmC0D0c pcmC0D0p pcmC0D1p power subsystem -> ../../../../../class/sound uevent Cc: Lennart Poettering <lennart@0pointer.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-14ALSA: add private_data to struct snd_jackTakashi Iwai1-0/+3
Added private_data and private_free fields to struct snd_jack so that the caller can assign the data. It'll be helpful for avoiding the double-free of the jack instance. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-24Merge branch 'topic/jack' into for-linusTakashi Iwai1-24/+21
2009-02-18ALSA: jack - Use card->shortname for input nameTakashi Iwai1-1/+1
Currently the jack layer refers to card->longname as a part of its input device name string. However, longname is often really long and way too ugly as an identifier, such as, "HDA Intel at 0xf8400000 irq 21". This patch changes the code to use card->shortname instead. The shortname string contains usually the h/w vendor and product names but without messy I/O port or IRQ numbers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-07ALSA: Add support for video out to the jack reporting APIJani Nikula1-0/+1
Add support for reporting new jack types SND_JACK_VIDEOOUT and SND_JACK_AVOUT (a combination of LINEOUT and VIDEOOUT) to the jack reporting API. Also add the corresponding SW_VIDEOOUT_INSERT switch to the input system header. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-03ALSA: Reduce boilerplate for new jack typesMark Brown1-24/+20
Use a lookup table rather than explicit code to map input subsystem jack types into ASoC ones, implemented as suggested by Takashi Iwai. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-25Merge branch 'topic/jack-mechanical' into to-pushTakashi Iwai1-0/+6
2008-12-19Merge branch 'fix/hda' into topic/hdaTakashi Iwai1-0/+3
2008-12-10ALSA: Add support for mechanical jack insertionMark Brown1-0/+6
Some systems support both mechanical and electrical jack detection, allowing them to report that a jack is physically present but does not have any functioning connections. Add a new jack type for these, allowing user space to report faulty connections. Thanks to Guillem Jover for the suggestion. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-27ALSA: jack: lineout support to jack abstraction layerMatthew Ranostay1-0/+6
This patch introduces support for reporting SW_LINEOUT_INSERT detection events via the jack abstraction layer. Also adds a SND_JACK_LINEOUT define to the input system header. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Cc: Dmitry Torokhov <dtor@mail.ru> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-27ALSA: hda: dynamic jack idMatthew Ranostay1-1/+2
This patch duplicates the jack->id pointer with kstrdup() to prevent scoping issues from calling autoprobing functions from the HDA section. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-16ALSA: Handle NULL jacks in snd_jack_report()Mark Brown1-0/+3
Facilitate drivers that wish to carry on if they can't create a jack input device by handling attempts to report the state of a NULL jack, removing the need to check for initialisation before use. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-29ALSA: Add jack reporting APIMark Brown1-0/+163
Currently very few systems provide information about jack status to user space, even though many have hardware facilities to do detection. Those systems that do use an input device with the existing SW_HEADPHONE_INSERT switch type to do so, often independently of ALSA. This patch introduces a standard method for representing jacks to user space into ALSA. It allows drivers to register jacks for a sound card with the input subsystem, binding the input device to the card to help user space associate the input devices with their sound cards. The created input devices are named in the form "card longname jack" where jack is provided by the driver when allocating a jack. By default the parent for the input device is the sound card but this can be overridden by the card driver. The existing user space API with SW_HEADPHONE_INSERT is preserved. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>