| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit fd15b457a86939c38aa12116adabd8ff686c5e51 upstream.
A: request_key() B: KEYCTL_INSTANTIATE_IOV
================ =========================
create auth key
store rka in auth key
wait for helper
get auth key
load rka from auth key
copy user payload
sleep on #PF
helper completed
detach and free rka
destroy auth key
wake up
use rka->target_key
**USE-AFTER-FREE**
Give request_key_auth payloads a refcount. Take a payload reference while
authkey->sem stabilizes the payload and revocation state. Hold that
reference across the instantiate and reject paths. Drop the auth key
owning reference from revoke and destroy.
[jarkko: Replaced the first two paragraphs of text with an actual
concurrency scenario.]
Cc: stable@vger.kernel.org # v5.10+
Fixes: b5f545c880a2 ("[PATCH] keys: Permit running process to instantiate keys")
Reported-by: Shaomin Chen <eeesssooo020@gmail.com>
Closes: https://lore.kernel.org/r/20260519144403.436694-1-eeesssooo020@gmail.com
Signed-off-by: Shaomin Chen <eeesssooo020@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cb481e59ea6cae3b7796ac1d7a22b6b24c3f3c0b upstream.
The length for the internal output buffer is calculated incorrectly, which
can result overflow when a too small buffer is provided.
Fix the bug by allocating internal output with the size of the maximum
length of the cryptographic primitive instead of caller provided size.
Link: https://lore.kernel.org/keyrings/20260531024914.3712130-1-jarkko@kernel.org/
Cc: stable@vger.kernel.org # v4.20+
Fixes: 00d60fd3b932 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]")
Reported-by: Alessandro Groppo <ale.grpp@gmail.com>
Tested-by: Alessandro Groppo <ale.grpp@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6f060496d03e4dc560a40f73770bd08335cb7a27 upstream.
aa_replace_profiles() walks ns->rawdata_list to dedup the incoming
policy blob against entries already attached to existing profiles.
Per the kernel-doc on struct aa_loaddata, list membership does not
hold a reference: profiles hold pcount, and when the last pcount
drops, do_ploaddata_rmfs() is queued on a workqueue that takes
ns->lock and removes the entry. Between dropping the last pcount
and the workqueue running, an entry remains on the list with
pcount == 0.
aa_get_profile_loaddata() is an unconditional kref_get() on
pcount, so when the dedup loop hits such an entry, refcount
hardening reports
refcount_t: addition on 0; use-after-free.
inside aa_replace_profiles(), and the poisoned counter then
trips "saturated" and "underflow" warnings on the subsequent
uses of the same loaddata.
Before commit a0b7091c4de4 ("apparmor: fix race on rawdata
dereference") the dedup path used a get_unless_zero-style helper
on a single counter, so the existing "if (tmp)" guard was
meaningful. The split-refcount refactor introduced
aa_get_profile_loaddata(), which has plain kref_get() semantics,
and the guard quietly became a no-op.
Introduce aa_get_profile_loaddata_not0(), matching the existing
_not0 convention used by aa_get_profile_not0(), and use it for
the rawdata_list dedup lookup so dying entries are skipped.
Reproduced on x86_64 with v7.1-rc5 in QEMU+KVM running Ubuntu
24.04 + stress-ng 0.17.06:
stress-ng --apparmor 1 --klog-check --timeout 60s
Without this patch the three refcount_t warnings fire within a
few seconds. With it the same 60 s run is clean. Coverage is a
smoke-test only; a longer soak with CONFIG_KASAN, CONFIG_KCSAN
and CONFIG_PROVE_LOCKING would be welcome from anyone with the
cycles.
Fixes: a0b7091c4de4 ("apparmor: fix race on rawdata dereference")
Reported-by: Colin Ian King <colin.i.king@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221513
Cc: stable@vger.kernel.org
Signed-off-by: Ruslan Valiyev <linuxoid@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4d587cd8a72155089a627130bbd4716ec0856e21 upstream.
sendmsg()/sendto() with MSG_FASTOPEN is a combination of connect(2) and
write(2): it opens the connection in the SYN. apparmor_socket_sendmsg()
only checks AA_MAY_SEND, so a profile that grants send but denies connect
lets a confined task open an outbound TCP/MPTCP connection that connect(2)
would have refused, bypassing connect mediation.
Mediate the implicit connect when MSG_FASTOPEN is set and a destination
is supplied. Add it to apparmor_socket_sendmsg() (not the shared
aa_sock_msg_perm() helper, which recvmsg also uses) and call aa_sk_perm()
directly, mirroring the selinux and tomoyo fixes. sk_is_tcp() does not
cover MPTCP fast open, so the SOCK_STREAM/IPPROTO_MPTCP arm is explicit.
Fixes: cf60af03ca4e ("net-tcp: Fast Open client - sendmsg(MSG_FASTOPEN)")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 82544d36b1729153c8aeb179e84750f0c085d3b1 ]
The existing SELinux security model for overlayfs is to allow access if
the current task is able to access the top level file (the "user" file)
and the mounter's credentials are sufficient to access the lower
level file (the "backing" file). Unfortunately, the current code does
not properly enforce these access controls for both mmap() and mprotect()
operations on overlayfs filesystems.
This patch makes use of the newly created security_mmap_backing_file()
LSM hook to provide the missing backing file enforcement for mmap()
operations, and leverages the backing file API and new LSM blob to
provide the necessary information to properly enforce the mprotect()
access controls.
Cc: stable@vger.kernel.org
Acked-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Cai Xinchen <caixinchen1@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6af36aeb147a06dea47c49859cd6ca5659aeb987 ]
Stacked filesystems such as overlayfs do not currently provide the
necessary mechanisms for LSMs to properly enforce access controls on the
mmap() and mprotect() operations. In order to resolve this gap, a LSM
security blob is being added to the backing_file struct and the following
new LSM hooks are being created:
security_backing_file_alloc()
security_backing_file_free()
security_mmap_backing_file()
The first two hooks are to manage the lifecycle of the LSM security blob
in the backing_file struct, while the third provides a new mmap() access
control point for the underlying backing file. It is also expected that
LSMs will likely want to update their security_file_mprotect() callback
to address issues with their mprotect() controls, but that does not
require a change to the security_file_mprotect() LSM hook.
There are a three other small changes to support these new LSM hooks:
* Pass the user file associated with a backing file down to
alloc_empty_backing_file() so it can be included in the
security_backing_file_alloc() hook.
* Add getter and setter functions for the backing_file struct LSM blob
as the backing_file struct remains private to fs/file_table.c.
* Constify the file struct field in the LSM common_audit_data struct to
better support LSMs that need to pass a const file struct pointer into
the common LSM audit code.
Thanks to Arnd Bergmann for identifying the missing EXPORT_SYMBOL_GPL()
and supplying a fixup.
Cc: stable@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-unionfs@vger.kernel.org
Cc: linux-erofs@lists.ozlabs.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
[ Mainline declares lsm_backing_file_cache in security/lsm.h. Linux 6.12.y
does not have security/lsm_init.c or security/lsm.h; the cache variable
is defined locally as static struct kmem_cache *lsm_backing_file_cache in
security/security.c. ]
Signed-off-by: Cai Xinchen <caixinchen1@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9f0ec4b16f2b41d663f688a8012e9e52b2657eba ]
The IMA log is currently copied to the new kernel during kexec 'load' using
ima_dump_measurement_list(). However, the IMA measurement list copied at
kexec 'load' may result in loss of IMA measurements records that only
occurred after the kexec 'load'. Move the IMA measurement list log copy
from kexec 'load' to 'execute'
Make the kexec_segment_size variable a local static variable within the
file, so it can be accessed during both kexec 'load' and 'execute'.
Define kexec_post_load() as a wrapper for calling ima_kexec_post_load() and
machine_kexec_post_load(). Replace the existing direct call to
machine_kexec_post_load() with kexec_post_load().
When there is insufficient memory to copy all the measurement logs, copy as
much of the measurement list as possible.
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
(cherry picked from commit 9f0ec4b16f2b41d663f688a8012e9e52b2657eba)
Signed-off-by: Sherry Yang <sherry.yang@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9ee8888a80fe2bd20ce929ffbc1dedd57607a778 ]
Currently, the function kexec_calculate_store_digests() calculates and
stores the digest of the segment during the kexec_file_load syscall,
where the IMA segment is also allocated.
Later, the IMA segment will be updated with the measurement log at the
kexec execute stage when a kexec reboot is initiated. Therefore, the
digests should be updated for the IMA segment in the normal case. The
problem is that the content of memory segments carried over to the new
kernel during the kexec systemcall can be changed at kexec 'execute'
stage, but the size and the location of the memory segments cannot be
changed at kexec 'execute' stage.
To address this, skip the calculation and storage of the digest for the
IMA segment in kexec_calculate_store_digests() so that it is not added
to the purgatory_sha_regions.
With this change, the IMA segment is not included in the digest
calculation, storage, and verification.
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
[zohar@linux.ibm.com: Fixed Signed-off-by tag to match author's email ]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
(cherry picked from commit 9ee8888a80fe2bd20ce929ffbc1dedd57607a778)
Signed-off-by: Sherry Yang <sherry.yang@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit be5498cac2ddb112c5bd7433d5e834a1a2493427 ]
some of those used to be needed, some had been cargo-culted for
no reason...
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stable-dep-of: ea5fe6a73ca5 ("net/handshake: Drain pending requests at net namespace exit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 43a1e3744548e6fd85873e6fb43e293eb4010694 upstream.
Nicholas Carlini reports that the keyring code calls assoc_array_find()
in find_key_to_update() without holding the RCU read lock, while the
assoc_array_gc() code really is designed around removing the node from
the tree and then freeing it after an RCU grace-period.
The regular key handling doesn't see this because holding the keyring
semaphore hides any lifetime issues, but the persistent key handling
uses a different model.
Instead of extending the keyring locking, just do the simple RCU locking
that the assoc_array was designed for.
Reported-by: Nicholas Carlini <npc@anthropic.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris James Morris <jmorris@namei.org>
Cc: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e4d82cbce2258f454634307fdabf33aa46b61ab0 ]
current_check_access_socket() treats AF_UNSPEC addresses as
AF_INET ones, and only later adds special case handling to
allow connect(AF_UNSPEC), and on IPv4 sockets
bind(AF_UNSPEC+INADDR_ANY).
This would be fine except AF_UNSPEC addresses can be as
short as a bare AF_UNSPEC sa_family_t field, and nothing
more. The AF_INET code path incorrectly enforces a length of
sizeof(struct sockaddr_in) instead.
Move AF_UNSPEC edge case handling up inside the switch-case,
before the address is (potentially incorrectly) treated as
AF_INET.
Fixes: fff69fb03dde ("landlock: Support network rules with TCP bind and connect")
Signed-off-by: Matthieu Buffet <matthieu@buffet.re>
Link: https://lore.kernel.org/r/20251027190726.626244-4-matthieu@buffet.re
Signed-off-by: Mickaël Salaün <mic@digikod.net>
[ There was a conflict due to missing commit 9f74411a40ce ("landlock:
Log TCP bind and connect denials") ]
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 4a9b16541ad3faf8bccb398532bf3f8b6bbf1188 upstream.
Just as proc_pid_attr_write() already does before calling the LSM
hook. This only matters for SELinux and AppArmor which check
whether the process is being ptraced and if so, whether to
allow the transition.
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d7bd8cf0b348d3edae7bee33e74a32b21668b181 ]
ima_tpm_chip->allocated_banks[i].crypto_id is initialized to
HASH_ALGO__LAST if the TPM algorithm is not supported. However there
are places relying on the algorithm to be valid because it is accessed
by hash_algo_name[].
On 6.12.40 I observe the following read out-of-bounds in hash_algo_name:
==================================================================
BUG: KASAN: global-out-of-bounds in create_securityfs_measurement_lists+0x396/0x440
Read of size 8 at addr ffffffff83e18138 by task swapper/0/1
CPU: 4 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.40 #3
Call Trace:
<TASK>
dump_stack_lvl+0x61/0x90
print_report+0xc4/0x580
? kasan_addr_to_slab+0x26/0x80
? create_securityfs_measurement_lists+0x396/0x440
kasan_report+0xc2/0x100
? create_securityfs_measurement_lists+0x396/0x440
create_securityfs_measurement_lists+0x396/0x440
ima_fs_init+0xa3/0x300
ima_init+0x7d/0xd0
init_ima+0x28/0x100
do_one_initcall+0xa6/0x3e0
kernel_init_freeable+0x455/0x740
kernel_init+0x24/0x1d0
ret_from_fork+0x38/0x80
ret_from_fork_asm+0x11/0x20
</TASK>
The buggy address belongs to the variable:
hash_algo_name+0xb8/0x420
Memory state around the buggy address:
ffffffff83e18000: 00 01 f9 f9 f9 f9 f9 f9 00 01 f9 f9 f9 f9 f9 f9
ffffffff83e18080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffffff83e18100: 00 00 00 00 00 00 00 f9 f9 f9 f9 f9 00 05 f9 f9
^
ffffffff83e18180: f9 f9 f9 f9 00 00 00 00 00 00 00 04 f9 f9 f9 f9
ffffffff83e18200: 00 00 00 00 00 00 00 00 04 f9 f9 f9 f9 f9 f9 f9
==================================================================
Seems like the TPM chip supports sha3_256, which isn't yet in
tpm_algorithms:
tpm tpm0: TPM with unsupported bank algorithm 0x0027
That's TPM_ALG_SHA3_256 == 0x0027 from "Trusted Platform Module 2.0
Library Part 2: Structures", page 51 [1].
See also the related U-Boot algorithms update [2].
Thus solve the problem by creating a file name with "_tpm_alg_<ID>"
postfix if the crypto algorithm isn't initialized.
This is how it looks on the test machine (patch ported to v6.12 release):
# ls -1 /sys/kernel/security/ima/
ascii_runtime_measurements
ascii_runtime_measurements_tpm_alg_27
ascii_runtime_measurements_sha1
ascii_runtime_measurements_sha256
binary_runtime_measurements
binary_runtime_measurements_tpm_alg_27
binary_runtime_measurements_sha1
binary_runtime_measurements_sha256
policy
runtime_measurements_count
violations
[1]: https://trustedcomputinggroup.org/wp-content/uploads/Trusted-Platform-Module-2.0-Library-Part-2-Version-184_pub.pdf
[2]: https://lists.denx.de/pipermail/u-boot/2024-July/558835.html
Fixes: 9fa8e7625008 ("ima: add crypto agility support for template-hash algorithm")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Cc: Enrico Bravi <enrico.bravi@polito.it>
Cc: Silvia Sisinni <silvia.sisinni@polito.it>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Tested-by: Roberto Sassu <roberto.sassu@huawei.com>
Link: https://github.com/linux-integrity/linux/issues/14
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d15ffbbf4d32a9007c4a339a9fecac90ce30432a ]
lookup_template_data_hash_algo() machinery is used to locate the
matching ima_algo_array[] element at read time; securityfs
allows to stash that into inode->i_private at object creation
time, so there's no need to bother
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stable-dep-of: d7bd8cf0b348 ("ima_fs: Correctly create securityfs files for unsupported hash algos")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 22260a99d791163f7697a240dfc48e4e5a91ecfe ]
removal of parent takes all children out
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stable-dep-of: d7bd8cf0b348 ("ima_fs: Correctly create securityfs files for unsupported hash algos")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 870819434c8dfcc3158033b66e7851b81bb17e21 ]
The return value of crypto_shash_final() is not checked in
ima_calc_boot_aggregate_tfm(). If the hash finalization fails, the
function returns success and a corrupted boot aggregate digest could
be used for IMA measurements.
Capture the return value and propagate any error to the caller.
Fixes: 76bb28f6126f ("ima: use new crypto_shash API instead of old crypto_hash")
Signed-off-by: Daniel Hodges <hodgesd@meta.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6348be02eead77bdd1562154ed6b3296ad3b3750 ]
fdget() is the first thing done in scope, all matching fdput() are
immediately followed by leaving the scope.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stable-dep-of: 66052a768d47 ("fanotify: call fanotify_events_supported() before path_permission() and security_path_notify()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 19cfa0099024bb9cd40f6d950caa7f47ff8e77f6 upstream.
Commit f22f9aaf6c3d ("selinux: remove the runtime disable
functionality") removed the underlying SELinux runtime disable
functionality but left everything else intact and started logging an
error message to warn any residual users.
Prune it to just log an error message once and to return count
(i.e. all bytes written successfully) to avoid breaking
userspace. This also fixes a local DoS from logspam.
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 868f31e4061eca8c3cd607d79d954d5e54f204aa upstream.
Currently sel_write_load() takes the policy mutex earlier than
necessary. Move the taking of the mutex later. This avoids
holding it unnecessarily across the vmalloc() and copy_from_user()
of the policy data.
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1e5a8eed7821e7a43a31b4c1b3675a91be6bc6f6 upstream.
Move lsm_get_xattr_slot() below the SBLABEL_MNT check so we don't leave
a NULL-named slot in the array when returning -EOPNOTSUPP; filesystem
initxattrs() callbacks stop iterating at the first NULL ->name, silently
dropping xattrs installed by later LSMs.
Cc: stable@vger.kernel.org
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4afc61702bdcc3b9b519749ef966cf762a6e7051 upstream.
apparmor_getprocattr() incorrectly calls task_ctx(current) instead of
task_ctx(task) when retrieving prev and exec attributes, returning the
caller's labels rather than the target's.
Fix by passing task to task_ctx().
The issue can be reproduced when a process with an onexec transition
(e.g., configured by a container runtime) is inspected via
/proc/<pid>/attr/apparmor/exec. The reader's own value is returned
instead of the target's.
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Fixes: 3b529a7600d8 ("apparmor: move task domain change info to task security")
Cc: stable@vger.kernel.org
Co-developed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: Cengiz Can <cengiz.can@canonical.com>
Co-developed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fe3aebf27dc1875b2a0d13431e2e8cf3cf350cca ]
Kdump kernel doesn't need IMA to do integrity measurement.
Hence the measurement list in 1st kernel doesn't need to be copied to
kdump kernel.
Here skip allocating buffer for measurement list copying if loading
kdump kernel. Then there won't be the later handling related to
ima_kexec_buffer.
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Tested-by: Baoquan He <bhe@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d0a00ce470e3ea19ba3b9f1c390aee739570a44a ]
kexec 'load' may be called multiple times. Free and realloc the buffer
only if the segment_size is changed from the previous kexec 'load' call.
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 49c9e09d961025b22e61ef9ad56aa1c21b6ce2f1 ]
Disconnected files or directories can appear when they are visible and
opened from a bind mount, but have been renamed or moved from the source
of the bind mount in a way that makes them inaccessible from the mount
point (i.e. out of scope).
Previously, access rights tied to files or directories opened through a
disconnected directory were collected by walking the related hierarchy
down to the root of the filesystem, without taking into account the
mount point because it couldn't be found. This could lead to
inconsistent access results, potential access right widening, and
hard-to-debug renames, especially since such paths cannot be printed.
For a sandboxed task to create a disconnected directory, it needs to
have write access (i.e. FS_MAKE_REG, FS_REMOVE_FILE, and FS_REFER) to
the underlying source of the bind mount, and read access to the related
mount point. Because a sandboxed task cannot acquire more access
rights than those defined by its Landlock domain, this could lead to
inconsistent access rights due to missing permissions that should be
inherited from the mount point hierarchy, while inheriting permissions
from the filesystem hierarchy hidden by this mount point instead.
Landlock now handles files and directories opened from disconnected
directories by taking into account the filesystem hierarchy when the
mount point is not found in the hierarchy walk, and also always taking
into account the mount point from which these disconnected directories
were opened. This ensures that a rename is not allowed if it would
widen access rights [1].
The rationale is that, even if disconnected hierarchies might not be
visible or accessible to a sandboxed task, relying on the collected
access rights from them improves the guarantee that access rights will
not be widened during a rename because of the access right comparison
between the source and the destination (see LANDLOCK_ACCESS_FS_REFER).
It may look like this would grant more access on disconnected files and
directories, but the security policies are always enforced for all the
evaluated hierarchies. This new behavior should be less surprising to
users and safer from an access control perspective.
Remove a wrong WARN_ON_ONCE() canary in collect_domain_accesses() and
fix the related comment.
Because opened files have their access rights stored in the related file
security properties, there is no impact for disconnected or unlinked
files.
Cc: Christian Brauner <brauner@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Song Liu <song@kernel.org>
Reported-by: Tingmao Wang <m@maowtm.org>
Closes: https://lore.kernel.org/r/027d5190-b37a-40a8-84e9-4ccbc352bcdf@maowtm.org
Closes: https://lore.kernel.org/r/09b24128f86973a6022e6aa8338945fcfb9a33e4.1749925391.git.m@maowtm.org
Fixes: b91c3e4ea756 ("landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER")
Fixes: cb2c7d1a1776 ("landlock: Support filesystem access-control")
Link: https://lore.kernel.org/r/b0f46246-f2c5-42ca-93ce-0d629702a987@maowtm.org [1]
Reviewed-by: Tingmao Wang <m@maowtm.org>
Link: https://lore.kernel.org/r/20251128172200.760753-2-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
(cherry picked from commit 49c9e09d961025b22e61ef9ad56aa1c21b6ce2f1)
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d617f0d72d8041c7099fd04a62db0f0fa5331c1a ]
Always synchronize access_masked_parent* with access_request_parent*
according to allowed_parent*. This is required for audit support to be
able to get back to the reason of denial.
In a rename/link action, instead of always checking a rule two times for
the same parent directory of the source and the destination files, only
check it when an action on a child was not already allowed. This also
enables us to keep consistent allowed_parent* status, which is required
to get back to the reason of denial.
For internal mount points, only upgrade allowed_parent* to true but do
not wrongfully set both of them to false otherwise. This is also
required to get back to the reason of denial.
This does not impact the current behavior but slightly optimize code and
prepare for audit support that needs to know the exact reason why an
access was denied.
Cc: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20250108154338.1129069-14-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
(cherry picked from commit d617f0d72d8041c7099fd04a62db0f0fa5331c1a)
Stable-dep-of: 49c9e09d9610 ("landlock: Fix handling of disconnected directories")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1613462be621ad5103ec338a7b0ca0746ec4e5f1 upstream.
When running in an unprivileged domU under Xen, the privcmd driver
is restricted to allow only hypercalls against a target domain, for
which the current domU is acting as a device model.
Add a boot parameter "unrestricted" to allow all hypercalls (the
hypervisor will still refuse destructive hypercalls affecting other
guests).
Make this new parameter effective only in case the domU wasn't started
using secure boot, as otherwise hypercalls targeting the domU itself
might result in violating the secure boot functionality.
This is achieved by adding another lockdown reason, which can be
tested to not being set when applying the "unrestricted" option.
This is part of XSA-482
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8e135b8aee5a06c52a4347a5a6d51223c6f36ba3 upstream.
AppArmor was putting the reference to i_private data on its end after
removing the original entry from the file system. However the inode
can aand does live beyond that point and it is possible that some of
the fs call back functions will be invoked after the reference has
been put, which results in a race between freeing the data and
accessing it through the fs.
While the rawdata/loaddata is the most likely candidate to fail the
race, as it has the fewest references. If properly crafted it might be
possible to trigger a race for the other types stored in i_private.
Fix this by moving the put of i_private referenced data to the correct
place which is during inode eviction.
Fixes: c961ee5f21b20 ("apparmor: convert from securityfs to apparmorfs for policy ns files")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Maxime Bélair <maxime.belair@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a0b7091c4de45a7325c8780e6934a894f92ac86b upstream.
There is a race condition that leads to a use-after-free situation:
because the rawdata inodes are not refcounted, an attacker can start
open()ing one of the rawdata files, and at the same time remove the
last reference to this rawdata (by removing the corresponding profile,
for example), which frees its struct aa_loaddata; as a result, when
seq_rawdata_open() is reached, i_private is a dangling pointer and
freed memory is accessed.
The rawdata inodes weren't refcounted to avoid a circular refcount and
were supposed to be held by the profile rawdata reference. However
during profile removal there is a window where the vfs and profile
destruction race, resulting in the use after free.
Fix this by moving to a double refcount scheme. Where the profile
refcount on rawdata is used to break the circular dependency. Allowing
for freeing of the rawdata once all inode references to the rawdata
are put.
Fixes: 5d5182cae401 ("apparmor: move to per loaddata files, instead of replicating in profiles")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Maxime Bélair <maxime.belair@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 39440b137546a3aa383cfdabc605fb73811b6093 upstream.
Differential encoding allows loops to be created if it is abused. To
prevent this the unpack should verify that a diff-encode chain
terminates.
Unfortunately the differential encode verification had two bugs.
1. it conflated states that had gone through check and already been
marked, with states that were currently being checked and marked.
This means that loops in the current chain being verified are treated
as a chain that has already been verified.
2. the order bailout on already checked states compared current chain
check iterators j,k instead of using the outer loop iterator i.
Meaning a step backwards in states in the current chain verification
was being mistaken for moving to an already verified state.
Move to a double mark scheme where already verified states get a
different mark, than the current chain being kept. This enables us
to also drop the backwards verification check that was the cause of
the second error as any already verified state is already marked.
Fixes: 031dcc8f4e84 ("apparmor: dfa add support for state differential encoding")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6601e13e82841879406bf9f369032656f441a425 upstream.
An unprivileged local user can load, replace, and remove profiles by
opening the apparmorfs interfaces, via a confused deputy attack, by
passing the opened fd to a privileged process, and getting the
privileged process to write to the interface.
This does require a privileged target that can be manipulated to do
the write for the unprivileged process, but once such access is
achieved full policy management is possible and all the possible
implications that implies: removing confinement, DoS of system or
target applications by denying all execution, by-passing the
unprivileged user namespace restriction, to exploiting kernel bugs for
a local privilege escalation.
The policy management interface can not have its permissions simply
changed from 0666 to 0600 because non-root processes need to be able
to load policy to different policy namespaces.
Instead ensure the task writing the interface has privileges that
are a subset of the task that opened the interface. This is already
done via policy for confined processes, but unconfined can delegate
access to the opened fd, by-passing the usual policy check.
Fixes: b7fd2c0340eac ("apparmor: add per policy ns .load, .replace, .remove interface files")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5df0c44e8f5f619d3beb871207aded7c78414502 upstream.
if ns_name is NULL after
1071 error = aa_unpack(udata, &lh, &ns_name);
and if ent->ns_name contains an ns_name in
1089 } else if (ent->ns_name) {
then ns_name is assigned the ent->ns_name
1095 ns_name = ent->ns_name;
however ent->ns_name is freed at
1262 aa_load_ent_free(ent);
and then again when freeing ns_name at
1270 kfree(ns_name);
Fix this by NULLing out ent->ns_name after it is transferred to ns_name
Fixes: 145a0ef21c8e9 ("apparmor: fix blob compression when ns is forced on a policy load")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d352873bbefa7eb39995239d0b44ccdf8aaa79a4 upstream.
The verify_dfa() function only checks DEFAULT_TABLE bounds when the state
is not differentially encoded.
When the verification loop traverses the differential encoding chain,
it reads k = DEFAULT_TABLE[j] and uses k as an array index without
validation. A malformed DFA with DEFAULT_TABLE[j] >= state_count,
therefore, causes both out-of-bounds reads and writes.
[ 57.179855] ==================================================================
[ 57.180549] BUG: KASAN: slab-out-of-bounds in verify_dfa+0x59a/0x660
[ 57.180904] Read of size 4 at addr ffff888100eadec4 by task su/993
[ 57.181554] CPU: 1 UID: 0 PID: 993 Comm: su Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy)
[ 57.181558] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 57.181563] Call Trace:
[ 57.181572] <TASK>
[ 57.181577] dump_stack_lvl+0x5e/0x80
[ 57.181596] print_report+0xc8/0x270
[ 57.181605] ? verify_dfa+0x59a/0x660
[ 57.181608] kasan_report+0x118/0x150
[ 57.181620] ? verify_dfa+0x59a/0x660
[ 57.181623] verify_dfa+0x59a/0x660
[ 57.181627] aa_dfa_unpack+0x1610/0x1740
[ 57.181629] ? __kmalloc_cache_noprof+0x1d0/0x470
[ 57.181640] unpack_pdb+0x86d/0x46b0
[ 57.181647] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181653] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181656] ? aa_unpack_nameX+0x1a8/0x300
[ 57.181659] aa_unpack+0x20b0/0x4c30
[ 57.181662] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181664] ? stack_depot_save_flags+0x33/0x700
[ 57.181681] ? kasan_save_track+0x4f/0x80
[ 57.181683] ? kasan_save_track+0x3e/0x80
[ 57.181686] ? __kasan_kmalloc+0x93/0xb0
[ 57.181688] ? __kvmalloc_node_noprof+0x44a/0x780
[ 57.181693] ? aa_simple_write_to_buffer+0x54/0x130
[ 57.181697] ? policy_update+0x154/0x330
[ 57.181704] aa_replace_profiles+0x15a/0x1dd0
[ 57.181707] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181710] ? __kvmalloc_node_noprof+0x44a/0x780
[ 57.181712] ? aa_loaddata_alloc+0x77/0x140
[ 57.181715] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181717] ? _copy_from_user+0x2a/0x70
[ 57.181730] policy_update+0x17a/0x330
[ 57.181733] profile_replace+0x153/0x1a0
[ 57.181735] ? rw_verify_area+0x93/0x2d0
[ 57.181740] vfs_write+0x235/0xab0
[ 57.181745] ksys_write+0xb0/0x170
[ 57.181748] do_syscall_64+0x8e/0x660
[ 57.181762] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 57.181765] RIP: 0033:0x7f6192792eb2
Remove the MATCH_FLAG_DIFF_ENCODE condition to validate all DEFAULT_TABLE
entries unconditionally.
Fixes: 031dcc8f4e84 ("apparmor: dfa add support for state differential encoding")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: Massimiliano Pellizzer <massimiliano.pellizzer@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8756b68edae37ff546c02091989a4ceab3f20abd upstream.
The match_char() macro evaluates its character parameter multiple
times when traversing differential encoding chains. When invoked
with *str++, the string pointer advances on each iteration of the
inner do-while loop, causing the DFA to check different characters
at each iteration and therefore skip input characters.
This results in out-of-bounds reads when the pointer advances past
the input buffer boundary.
[ 94.984676] ==================================================================
[ 94.985301] BUG: KASAN: slab-out-of-bounds in aa_dfa_match+0x5ae/0x760
[ 94.985655] Read of size 1 at addr ffff888100342000 by task file/976
[ 94.986319] CPU: 7 UID: 1000 PID: 976 Comm: file Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy)
[ 94.986322] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 94.986329] Call Trace:
[ 94.986341] <TASK>
[ 94.986347] dump_stack_lvl+0x5e/0x80
[ 94.986374] print_report+0xc8/0x270
[ 94.986384] ? aa_dfa_match+0x5ae/0x760
[ 94.986388] kasan_report+0x118/0x150
[ 94.986401] ? aa_dfa_match+0x5ae/0x760
[ 94.986405] aa_dfa_match+0x5ae/0x760
[ 94.986408] __aa_path_perm+0x131/0x400
[ 94.986418] aa_path_perm+0x219/0x2f0
[ 94.986424] apparmor_file_open+0x345/0x570
[ 94.986431] security_file_open+0x5c/0x140
[ 94.986442] do_dentry_open+0x2f6/0x1120
[ 94.986450] vfs_open+0x38/0x2b0
[ 94.986453] ? may_open+0x1e2/0x2b0
[ 94.986466] path_openat+0x231b/0x2b30
[ 94.986469] ? __x64_sys_openat+0xf8/0x130
[ 94.986477] do_file_open+0x19d/0x360
[ 94.986487] do_sys_openat2+0x98/0x100
[ 94.986491] __x64_sys_openat+0xf8/0x130
[ 94.986499] do_syscall_64+0x8e/0x660
[ 94.986515] ? count_memcg_events+0x15f/0x3c0
[ 94.986526] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986540] ? handle_mm_fault+0x1639/0x1ef0
[ 94.986551] ? vma_start_read+0xf0/0x320
[ 94.986558] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986561] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986563] ? fpregs_assert_state_consistent+0x50/0xe0
[ 94.986572] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986574] ? arch_exit_to_user_mode_prepare+0x9/0xb0
[ 94.986587] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986588] ? irqentry_exit+0x3c/0x590
[ 94.986595] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 94.986597] RIP: 0033:0x7fda4a79c3ea
Fix by extracting the character value before invoking match_char,
ensuring single evaluation per outer loop.
Fixes: 074c1cd798cb ("apparmor: dfa move character match into a macro")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: Massimiliano Pellizzer <massimiliano.pellizzer@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 306039414932c80f8420695a24d4fe10c84ccfb2 upstream.
Currently the number of policy namespaces is not bounded relying on
the user namespace limit. However policy namespaces aren't strictly
tied to user namespaces and it is possible to create them and nest
them arbitrarily deep which can be used to exhaust system resource.
Hard cap policy namespaces to the same depth as user namespaces.
Fixes: c88d4c7b049e8 ("AppArmor: core policy routines")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Reviewed-by: Ryan Lee <ryan.lee@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ab09264660f9de5d05d1ef4e225aa447c63a8747 upstream.
The profile removal code uses recursion when removing nested profiles,
which can lead to kernel stack exhaustion and system crashes.
Reproducer:
$ pf='a'; for ((i=0; i<1024; i++)); do
echo -e "profile $pf { \n }" | apparmor_parser -K -a;
pf="$pf//x";
done
$ echo -n a > /sys/kernel/security/apparmor/.remove
Replace the recursive __aa_profile_list_release() approach with an
iterative approach in __remove_profile(). The function repeatedly
finds and removes leaf profiles until the entire subtree is removed,
maintaining the same removal semantic without recursion.
Fixes: c88d4c7b049e ("AppArmor: core policy routines")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: Massimiliano Pellizzer <massimiliano.pellizzer@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e38c55d9f834e5b848bfed0f5c586aaf45acb825 upstream.
The function sets `*ns = NULL` on every call, leaking the namespace
string allocated in previous iterations when multiple profiles are
unpacked. This also breaks namespace consistency checking since *ns
is always NULL when the comparison is made.
Remove the incorrect assignment.
The caller (aa_unpack) initializes *ns to NULL once before the loop,
which is sufficient.
Fixes: dd51c8485763 ("apparmor: provide base for multiple profiles to be replaced at once")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: Massimiliano Pellizzer <massimiliano.pellizzer@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9063d7e2615f4a7ab321de6b520e23d370e58816 upstream.
Start states are read from untrusted data and used as indexes into the
DFA state tables. The aa_dfa_next() function call in unpack_pdb() will
access dfa->tables[YYTD_ID_BASE][start], and if the start state exceeds
the number of states in the DFA, this results in an out-of-bound read.
==================================================================
BUG: KASAN: slab-out-of-bounds in aa_dfa_next+0x2a1/0x360
Read of size 4 at addr ffff88811956fb90 by task su/1097
...
Reject policies with out-of-bounds start states during unpacking
to prevent the issue.
Fixes: ad5ff3db53c6 ("AppArmor: Add ability to load extended policy")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: Massimiliano Pellizzer <massimiliano.pellizzer@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 10d1c75ed4382a8e79874379caa2ead8952734f9 ]
Patch series "Address page fault in ima_restore_measurement_list()", v3.
When the second-stage kernel is booted via kexec with a limiting command
line such as "mem=<size>" we observe a pafe fault that happens.
BUG: unable to handle page fault for address: ffff97793ff47000
RIP: ima_restore_measurement_list+0xdc/0x45a
#PF: error_code(0x0000) not-present page
This happens on x86_64 only, as this is already fixed in aarch64 in
commit: cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer
against memory bounds")
This patch (of 3):
When the second-stage kernel is booted with a limiting command line (e.g.
"mem=<size>"), the IMA measurement buffer handed over from the previous
kernel may fall outside the addressable RAM of the new kernel. Accessing
such a buffer can fault during early restore.
Introduce a small generic helper, ima_validate_range(), which verifies
that a physical [start, end] range for the previous-kernel IMA buffer lies
within addressable memory:
- On x86, use pfn_range_is_mapped().
- On OF based architectures, use page_is_ram().
Link: https://lkml.kernel.org/r/20251231061609.907170-1-harshit.m.mogalapalli@oracle.com
Link: https://lkml.kernel.org/r/20251231061609.907170-2-harshit.m.mogalapalli@oracle.com
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: guoweikang <guoweikang.kernel@gmail.com>
Cc: Henry Willard <henry.willard@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Jonathan McDowell <noodles@fb.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Paul Webb <paul.x.webb@oracle.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Yifei Liu <yifei.l.liu@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f18e502db673c75f762d47101dafcf58f30e2733 ]
The IMA log is currently copied to the new kernel during kexec 'load'
using ima_dump_measurement_list(). However, the log copied at kexec
'load' may result in loss of IMA measurements that only occurred after
kexec "load'. Setup the needed infrastructure to move the IMA log copy
from kexec 'load' to 'execute'.
Define a new IMA hook ima_update_kexec_buffer() as a stub function.
It will be used to call ima_dump_measurement_list() during kexec 'execute'.
Implement ima_kexec_post_load() function to be invoked after the new
Kernel image has been loaded for kexec. ima_kexec_post_load() maps the
IMA buffer to a segment in the newly loaded Kernel. It also registers
the reboot notifier_block to trigger ima_update_kexec_buffer() at
kexec 'execute'.
Set the priority of register_reboot_notifier to INT_MIN to ensure that the
IMA log copy operation will happen at the end of the operation chain, so
that all the IMA measurement records extended into the TPM are copied
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Stable-dep-of: 10d1c75ed438 ("ima: verify the previous kernel's IMA buffer lies in addressable RAM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c95e1acb6d7f00efab73e41b31e0560751e3f469 ]
In the current implementation, the ima_dump_measurement_list() API is
called during the kexec "load" phase, where a buffer is allocated and
the measurement records are copied. Due to this, new events added after
kexec load but before kexec execute are not carried over to the new kernel
during kexec operation
Carrying the IMA measurement list across kexec requires allocating a
buffer and copying the measurement records. Separate allocating the
buffer and copying the measurement records into separate functions in
order to allocate the buffer at kexec 'load' and copy the measurements
at kexec 'execute'.
After moving the vfree() here at this stage in the patch set, the IMA
measurement list fails to verify when doing two consecutive "kexec -s -l"
with/without a "kexec -s -u" in between. Only after "ima: kexec: move
IMA log copy from kexec load to execute" the IMA measurement list verifies
properly with the vfree() here.
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Stable-dep-of: 10d1c75ed438 ("ima: verify the previous kernel's IMA buffer lies in addressable RAM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cb5052282c65dc998d12e4eea8d5133249826c13 ]
Before making the function local seq_file "file" variable file static
global, rename it to "ima_kexec_file".
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Stable-dep-of: 10d1c75ed438 ("ima: verify the previous kernel's IMA buffer lies in addressable RAM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 68af44a71975688b881ea524e2526bb7c7ad0e9a ]
The ima_measurements list is append-only and doesn't require
rcu_read_lock() protection. However, lockdep issues a warning when
traversing RCU lists without the read lock:
security/integrity/ima/ima_kexec.c:40 RCU-list traversed in non-reader section!!
Fix this by using the variant of list_for_each_entry_rcu() with the last
argument set to true. This tells the RCU subsystem that traversing this
append-only list without the read lock is intentional and safe.
This change silences the lockdep warning while maintaining the correct
semantics for the append-only list traversal.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Stable-dep-of: 10d1c75ed438 ("ima: verify the previous kernel's IMA buffer lies in addressable RAM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9058798652c8bc0584ed1fb0766a1015046c06e8 ]
aa-label_match is not correctly returning the state in all cases.
The only reason this didn't cause a error is that all callers currently
ignore the return value.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602020631.wXgZosyU-lkp@intel.com/
Fixes: a4c9efa4dbad6 ("apparmor: make label_match return a consistent value")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit df9ac55abd18628bd8cff687ea043660532a3654 ]
If the export_binary parameter is disabled on runtime, profiles that
were loaded before that will still have their rawdata stored in
apparmorfs, with a symbolic link to the rawdata on the policy
directory. When one of those profiles are replaced, the rawdata is set
to NULL, but when trying to resolve the symbolic links to rawdata for
that profile, it will try to dereference profile->rawdata->name when
profile->rawdata is now NULL causing an oops. Fix it by checking if
rawdata is set.
[ 168.653080] BUG: kernel NULL pointer dereference, address: 0000000000000088
[ 168.657420] #PF: supervisor read access in kernel mode
[ 168.660619] #PF: error_code(0x0000) - not-present page
[ 168.663613] PGD 0 P4D 0
[ 168.665450] Oops: Oops: 0000 [#1] SMP NOPTI
[ 168.667836] CPU: 1 UID: 0 PID: 1729 Comm: ls Not tainted 6.19.0-rc7+ #3 PREEMPT(voluntary)
[ 168.672308] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 168.679327] RIP: 0010:rawdata_get_link_base.isra.0+0x23/0x330
[ 168.682768] Code: 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 18 48 89 55 d0 48 85 ff 0f 84 e3 01 00 00 <48> 83 3c 25 88 00 00 00 00 0f 84 d4 01 00 00 49 89 f6 49 89 cc e8
[ 168.689818] RSP: 0018:ffffcdcb8200fb80 EFLAGS: 00010282
[ 168.690871] RAX: ffffffffaee74ec0 RBX: 0000000000000000 RCX: ffffffffb0120158
[ 168.692251] RDX: ffffcdcb8200fbe0 RSI: ffff88c187c9fa80 RDI: ffff88c186c98a80
[ 168.693593] RBP: ffffcdcb8200fbc0 R08: 0000000000000000 R09: 0000000000000000
[ 168.694941] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88c186c98a80
[ 168.696289] R13: 00007fff005aaa20 R14: 0000000000000080 R15: ffff88c188f4fce0
[ 168.697637] FS: 0000790e81c58280(0000) GS:ffff88c20a957000(0000) knlGS:0000000000000000
[ 168.699227] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 168.700349] CR2: 0000000000000088 CR3: 000000012fd3e000 CR4: 0000000000350ef0
[ 168.701696] Call Trace:
[ 168.702325] <TASK>
[ 168.702995] rawdata_get_link_data+0x1c/0x30
[ 168.704145] vfs_readlink+0xd4/0x160
[ 168.705152] do_readlinkat+0x114/0x180
[ 168.706214] __x64_sys_readlink+0x1e/0x30
[ 168.708653] x64_sys_call+0x1d77/0x26b0
[ 168.709525] do_syscall_64+0x81/0x500
[ 168.710348] ? do_statx+0x72/0xb0
[ 168.711109] ? putname+0x3e/0x80
[ 168.711845] ? __x64_sys_statx+0xb7/0x100
[ 168.712711] ? x64_sys_call+0x10fc/0x26b0
[ 168.713577] ? do_syscall_64+0xbf/0x500
[ 168.714412] ? do_user_addr_fault+0x1d2/0x8d0
[ 168.715404] ? irqentry_exit+0xb2/0x740
[ 168.716359] ? exc_page_fault+0x90/0x1b0
[ 168.717307] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 1180b4c757aab ("apparmor: fix dangling symlinks to policy rawdata after replacement")
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 640cf2f09575c9dc344b3f7be2498d31e3923ead ]
When aa_get_buffer() pulls from the per-cpu list it unconditionally
decrements cache->hold. If hold reaches 0 while count is still non-zero,
the unsigned decrement wraps to UINT_MAX. This keeps hold non-zero for a
very long time, so aa_put_buffer() never returns buffers to the global
list, which can starve other CPUs and force repeated kmalloc(aa_g_path_max)
allocations.
Guard the decrement so hold never underflows.
Fixes: ea9bae12d028 ("apparmor: cache buffers on percpu list if there is lock contention")
Signed-off-by: Zhengmian Hu <huzhengmian@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a4c9efa4dbad6dacad6e8b274e30e814c8353097 ]
compound match is inconsistent in returning a state or an integer error
this is problemati if the error is ever used as a state in the state
machine
Fixes: f1bd904175e81 ("apparmor: add the base fns() for domain labels")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b2e27be2948f2f8c38421cd554b5fc9383215648 ]
The modes shouldn't be applied at the point of label match, it just
results in them being applied multiple times. Instead they should be
applied after which is already being done by all callers so it can
just be dropped from label_match.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Stable-dep-of: a4c9efa4dbad ("apparmor: make label_match return a consistent value")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6ca56813f4a589f536adceb42882855d91fb1125 ]
Posix cpu timers requires an additional step beyond setting the rlimit.
Refactor the code so its clear when what code is setting the
limit and conditionally update the posix cpu timers when appropriate.
Fixes: baa73d9e478ff ("posix-timers: Make them configurable")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 74b7105e53e80a4072bd3e1a50be7aa15e3f0a01 ]
In policy_unpack.c:unpack_perms_table, the perms struct is allocated via
kcalloc, with the position being reset if the allocation fails. However,
the error path results in -EPROTO being retured instead of -ENOMEM. Fix
this to return the correct error code.
Reported-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
Fixes: fd1b2b95a2117 ("apparmor: add the ability for policy to specify a permission table")
Reviewed-by: Tyler Hicks <code@tyhicks.com>
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6fc367bfd4c8886e6b1742aabbd1c0bdc310db3a ]
Source blob may come from userspace and might be unaligned.
Try to optize the copying process by avoiding unaligned memory accesses.
- Added Fixes tag
- Added "Fix &" to description as this doesn't just optimize but fixes
a potential unaligned memory access
Fixes: e6e8bf418850d ("apparmor: fix restricted endian type warnings for dfa unpack")
Signed-off-by: Helge Deller <deller@gmx.de>
[jj: remove duplicate word "convert" in comment trigger checkpatch warning]
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
