| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Bug fixes, code clean up, and new features:
- IMA policy rules can be defined in terms of LSM labels, making the
IMA policy dependent on LSM policy label changes, in particular LSM
label deletions. The new environment, in which IMA-appraisal is
being used, frequently updates the LSM policy and permits LSM label
deletions.
- Prevent an mmap'ed shared file opened for write from also being
mmap'ed execute. In the long term, making this and other similar
changes at the VFS layer would be preferable.
- The IMA per policy rule template format support is needed for a
couple of new/proposed features (eg. kexec boot command line
measurement, appended signatures, and VFS provided file hashes).
- Other than the "boot-aggregate" record in the IMA measuremeent
list, all other measurements are of file data. Measuring and
storing the kexec boot command line in the IMA measurement list is
the first buffer based measurement included in the measurement
list"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: Introduce struct evm_xattr
ima: Update MAX_TEMPLATE_NAME_LEN to fit largest reasonable definition
KEXEC: Call ima_kexec_cmdline to measure the boot command line args
IMA: Define a new template field buf
IMA: Define a new hook to measure the kexec boot command line arguments
IMA: support for per policy rule template formats
integrity: Fix __integrity_init_keyring() section mismatch
ima: Use designated initializers for struct ima_event_data
ima: use the lsm policy update notifier
LSM: switch to blocking policy update notifiers
x86/ima: fix the Kconfig dependency for IMA_ARCH_POLICY
ima: Make arch_policy_entry static
ima: prevent a file already mmap'ed write to be mmap'ed execute
x86/ima: check EFI SetupMode too
|
|
A buffer(kexec boot command line arguments) measured into IMA
measuremnt list cannot be appraised, without already being
aware of the buffer contents. Since hashes are non-reversible,
raw buffer is needed for validation or regenerating hash for
appraisal/attestation.
Add support to store/read the buffer contents in HEX.
The kexec cmdline hash is stored in the "d-ng" field of the
template data. It can be verified using
sudo cat /sys/kernel/security/integrity/ima/ascii_runtime_measurements |
grep kexec-cmdline | cut -d' ' -f 6 | xxd -r -p | sha256sum
- Add two new fields to ima_event_data to hold the buf and
buf_len
- Add a new template field 'buf' to be used to store/read
the buffer data.
- Updated process_buffer_meaurement to add the buffer to
ima_event_data. process_buffer_measurement added in
"Define a new IMA hook to measure the boot command line
arguments"
- Add a new template policy name ima-buf to represent
'd-ng|n-ng|buf'
Signed-off-by: Prakhar Srivastava <prsriva02@gmail.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Currently during soft reboot(kexec_file_load) boot command line
arguments are not measured. Define hooks needed to measure kexec
command line arguments during soft reboot(kexec_file_load).
- A new ima hook ima_kexec_cmdline is defined to be called by the
kexec code.
- A new function process_buffer_measurement is defined to measure
the buffer hash into the IMA measurement list.
- A new func policy KEXEC_CMDLINE is defined to control the
measurement.
Signed-off-by: Prakhar Srivastava <prsriva02@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Admins may wish to log different measurements using different IMA
templates. Add support for overriding the default template on a per-rule
basis.
Inspired-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Don't do lazy policy updates while running the rule matching,
run the updates as they happen.
Depends on commit f242064c5df3 ("LSM: switch to blocking policy update notifiers")
Signed-off-by: Janne Karhunen <janne.karhunen@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 315 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The kernel calls deny_write_access() to prevent a file already opened
for write from being executed and also prevents files being executed
from being opened for write. For some reason this does not extend to
files being mmap'ed execute.
From an IMA perspective, measuring/appraising the integrity of a file
being mmap'ed shared execute, without first making sure the file cannot
be modified, makes no sense. This patch prevents files, in policy,
already mmap'ed shared write, from being mmap'ed execute.
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
If tmpfiles can be made persistent, then newly created tmpfiles need to
be treated like any other new files in policy.
This patch indicates which newly created tmpfiles are in policy, causing
the file hash to be calculated on __fput().
Reported-by: Ignaz Forster <ignaz.forster@gmx.de>
[rgoldwyn@suse.com: Call ima_post_create_tmpfile() in vfs_tmpfile() as
opposed to do_tmpfile(). This will help the case for overlayfs where
copy_up is denied while overwriting a file.]
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull integrity updates from James Morris:
"In Linux 4.19, a new LSM hook named security_kernel_load_data was
upstreamed, allowing LSMs and IMA to prevent the kexec_load syscall.
Different signature verification methods exist for verifying the
kexec'ed kernel image. This adds additional support in IMA to prevent
loading unsigned kernel images via the kexec_load syscall,
independently of the IMA policy rules, based on the runtime "secure
boot" flag. An initial IMA kselftest is included.
In addition, this pull request defines a new, separate keyring named
".platform" for storing the preboot/firmware keys needed for verifying
the kexec'ed kernel image's signature and includes the associated IMA
kexec usage of the ".platform" keyring.
(David Howell's and Josh Boyer's patches for reading the
preboot/firmware keys, which were previously posted for a different
use case scenario, are included here)"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
integrity: Remove references to module keyring
ima: Use inode_is_open_for_write
ima: Support platform keyring for kernel appraisal
efi: Allow the "db" UEFI variable to be suppressed
efi: Import certificates from UEFI Secure Boot
efi: Add an EFI signature blob parser
efi: Add EFI signature data types
integrity: Load certs to the platform keyring
integrity: Define a trusted platform keyring
selftests/ima: kexec_load syscall test
ima: don't measure/appraise files on efivarfs
x86/ima: retry detecting secure boot mode
docs: Extend trusted keys documentation for TPM 2.0
x86/ima: define arch_get_ima_policy() for x86
ima: add support for arch specific policies
ima: refactor ima_init_policy()
ima: prevent kexec_load syscall based on runtime secureboot flag
x86/ima: define arch_ima_get_secureboot
integrity: support new struct public_key_signature encoding field
|
|
In commit 4f83d5ea643a ("security: integrity: make ima_main explicitly
non-modular") I'd removed <linux/module.h> after assuming that the
function is_module_sig_enforced() was an LSM function and not a core
kernel module function.
Unfortunately the typical .config selections used in build testing
provide an implicit <linux/module.h> presence, and so normal/typical
build testing did not immediately reveal my incorrect assumption.
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-ima-devel@lists.sourceforge.net
Cc: linux-security-module@vger.kernel.org
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into next-integrity
From Mimi:
In Linux 4.19, a new LSM hook named security_kernel_load_data was
upstreamed, allowing LSMs and IMA to prevent the kexec_load
syscall. Different signature verification methods exist for verifying
the kexec'ed kernel image. This pull request adds additional support
in IMA to prevent loading unsigned kernel images via the kexec_load
syscall, independently of the IMA policy rules, based on the runtime
"secure boot" flag. An initial IMA kselftest is included.
In addition, this pull request defines a new, separate keyring named
".platform" for storing the preboot/firmware keys needed for verifying
the kexec'ed kernel image's signature and includes the associated IMA
kexec usage of the ".platform" keyring.
(David Howell's and Josh Boyer's patches for reading the
preboot/firmware keys, which were previously posted for a different
use case scenario, are included here.)
|
|
Use the aptly named function rather than open coding the check. No
functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
The Makefile/Kconfig entry controlling compilation of this code is:
obj-$(CONFIG_IMA) += ima.o
ima-y := ima_fs.o ima_queue.o ima_init.o ima_main.o ima_crypto.o ima_api.o \
ima_policy.o ima_template.o ima_template_lib.o
security/integrity/ima/Kconfig:config IMA
security/integrity/ima/Kconfig- bool "Integrity Measurement Architecture(IMA)"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-ima-devel@lists.sourceforge.net
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
When CONFIG_KEXEC_VERIFY_SIG is enabled, the kexec_file_load syscall
requires the kexec'd kernel image to be signed. Distros are concerned
about totally disabling the kexec_load syscall. As a compromise, the
kexec_load syscall will only be disabled when CONFIG_KEXEC_VERIFY_SIG
is configured and the system is booted with secureboot enabled.
This patch disables the kexec_load syscall only for systems booted with
secureboot enabled.
[zohar@linux.ibm.com: add missing mesage on kexec_load failure]
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Constify some static data that is never modified,
so that it is placed in .rodata.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
- kstrdup() return value fix from Eric Biggers
- Add new security_load_data hook to differentiate security checking of
kernel-loaded binaries in the case of there being no associated file
descriptor, from Mimi Zohar.
- Add ability to IMA to specify a policy at build-time, rather than
just via command line params or by loading a custom policy, from
Mimi.
- Allow IMA and LSMs to prevent sysfs firmware load fallback (e.g. if
using signed firmware), from Mimi.
- Allow IMA to deny loading of kexec kernel images, as they cannot be
measured by IMA, from Mimi.
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
security: check for kstrdup() failure in lsm_append()
security: export security_kernel_load_data function
ima: based on policy warn about loading firmware (pre-allocated buffer)
module: replace the existing LSM hook in init_module
ima: add build time policy
ima: based on policy require signed firmware (sysfs fallback)
firmware: add call to LSM hook before firmware sysfs fallback
ima: based on policy require signed kexec kernel images
kexec: add call to LSM hook in original kexec_load syscall
security: define new LSM hook named security_kernel_load_data
MAINTAINERS: remove the outdated "LINUX SECURITY MODULE (LSM) FRAMEWORK" entry
|
|
Some systems are memory constrained but they need to load very large
firmwares. The firmware subsystem allows drivers to request this
firmware be loaded from the filesystem, but this requires that the
entire firmware be loaded into kernel memory first before it's provided
to the driver. This can lead to a situation where we map the firmware
twice, once to load the firmware into kernel memory and once to copy the
firmware into the final resting place.
To resolve this problem, commit a098ecd2fa7d ("firmware: support loading
into a pre-allocated buffer") introduced request_firmware_into_buf() API
that allows drivers to request firmware be loaded directly into a
pre-allocated buffer.
Do devices using pre-allocated memory run the risk of the firmware being
accessible to the device prior to the completion of IMA's signature
verification any more than when using two buffers? (Refer to mailing list
discussion[1]).
Only on systems with an IOMMU can the access be prevented. As long as
the signature verification completes prior to the DMA map is performed,
the device can not access the buffer. This implies that the same buffer
can not be re-used. Can we ensure the buffer has not been DMA mapped
before using the pre-allocated buffer?
[1] https://lkml.org/lkml/2018/7/10/56
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
Both the init_module and finit_module syscalls call either directly
or indirectly the security_kernel_read_file LSM hook. This patch
replaces the direct call in init_module with a call to the new
security_kernel_load_data hook and makes the corresponding changes
in SELinux, LoadPin, and IMA.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
With an IMA policy requiring signed firmware, this patch prevents
the sysfs fallback method of loading firmware.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Matthew Garrett <mjg59@google.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
The original kexec_load syscall can not verify file signatures, nor can
the kexec image be measured. Based on policy, deny the kexec_load
syscall.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
|
|
just check ->f_mode in ima_appraise_measurement()
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
match_string() returns the index of an array for a matching string,
which can be used intead of open coded variant.
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
Don't differentiate, for now, between kernel_read_file_id READING_FIRMWARE
and READING_FIRMWARE_PREALLOC_BUFFER enumerations.
Fixes: a098ecd firmware: support loading into a pre-allocated buffer (since 4.8)
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Serge E. Hallyn <serge@hallyn.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
|
|
Commit a756024 ("ima: added ima_policy_flag variable") replaced
ima_initialized with ima_policy_flag, but didn't remove ima_initialized.
This patch removes it.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
IMA requires having it's hash algorithm be compiled-in due to it's
early use. The default IMA algorithm is protected by Kconfig to be
compiled-in.
The ima_hash kernel parameter allows to choose the hash algorithm. When
the specified algorithm is not available or available as a module, IMA
initialization fails, which leads to a kernel panic (mknodat syscall calls
ima_post_path_mknod()). Therefore as fallback we force IMA to use
the default builtin Kconfig hash algorithm.
Fixed crash:
$ grep CONFIG_CRYPTO_MD4 .config
CONFIG_CRYPTO_MD4=m
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-2.3-default root=UUID=74ae8202-9ca7-4e39-813b-22287ec52f7a video=1024x768-16 plymouth.ignore-serial-consoles console=ttyS0 console=tty resume=/dev/disk/by-path/pci-0000:00:07.0-part3 splash=silent showopts ima_hash=md4
...
[ 1.545190] ima: Can not allocate md4 (reason: -2)
...
[ 2.610120] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 2.611903] IP: ima_match_policy+0x23/0x390
[ 2.612967] PGD 0 P4D 0
[ 2.613080] Oops: 0000 [#1] SMP
[ 2.613080] Modules linked in: autofs4
[ 2.613080] Supported: Yes
[ 2.613080] CPU: 0 PID: 1 Comm: systemd Not tainted 4.12.14-2.3-default #1
[ 2.613080] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
[ 2.613080] task: ffff88003e2d0040 task.stack: ffffc90000190000
[ 2.613080] RIP: 0010:ima_match_policy+0x23/0x390
[ 2.613080] RSP: 0018:ffffc90000193e88 EFLAGS: 00010296
[ 2.613080] RAX: 0000000000000000 RBX: 000000000000000c RCX: 0000000000000004
[ 2.613080] RDX: 0000000000000010 RSI: 0000000000000001 RDI: ffff880037071728
[ 2.613080] RBP: 0000000000008000 R08: 0000000000000000 R09: 0000000000000000
[ 2.613080] R10: 0000000000000008 R11: 61c8864680b583eb R12: 00005580ff10086f
[ 2.613080] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000008000
[ 2.613080] FS: 00007f5c1da08940(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
[ 2.613080] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.613080] CR2: 0000000000000000 CR3: 0000000037002000 CR4: 00000000003406f0
[ 2.613080] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2.613080] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2.613080] Call Trace:
[ 2.613080] ? shmem_mknod+0xbf/0xd0
[ 2.613080] ima_post_path_mknod+0x1c/0x40
[ 2.613080] SyS_mknod+0x210/0x220
[ 2.613080] entry_SYSCALL_64_fastpath+0x1a/0xa5
[ 2.613080] RIP: 0033:0x7f5c1bfde570
[ 2.613080] RSP: 002b:00007ffde1c90dc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000085
[ 2.613080] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5c1bfde570
[ 2.613080] RDX: 0000000000000000 RSI: 0000000000008000 RDI: 00005580ff10086f
[ 2.613080] RBP: 00007ffde1c91040 R08: 00005580ff10086f R09: 0000000000000000
[ 2.613080] R10: 0000000000104000 R11: 0000000000000246 R12: 00005580ffb99660
[ 2.613080] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000002
[ 2.613080] Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 56 44 8d 14 09 41 55 41 54 55 53 44 89 d3 09 cb 48 83 ec 38 48 8b 05 c5 03 29 01 <4c> 8b 20 4c 39 e0 0f 84 d7 01 00 00 4c 89 44 24 08 89 54 24 20
[ 2.613080] RIP: ima_match_policy+0x23/0x390 RSP: ffffc90000193e88
[ 2.613080] CR2: 0000000000000000
[ 2.613080] ---[ end trace 9a9f0a8a73079f6a ]---
[ 2.673052] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[ 2.673052]
[ 2.675337] Kernel Offset: disabled
[ 2.676405] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
This patch addresses the fuse privileged mounted filesystems in
environments which are unwilling to accept the risk of trusting the
signature verification and want to always fail safe, but are for example
using a pre-built kernel.
This patch defines a new builtin policy named "fail_securely", which can
be specified on the boot command line as an argument to "ima_policy=".
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Dongsu Park <dongsu@kinvolk.io>
Cc: Alban Crequy <alban@kinvolk.io>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
This patch addresses the fuse privileged mounted filesystems in a "secure"
environment, with a correctly enforced security policy, which is willing
to assume the inherent risk of specific fuse filesystems that are well
defined and properly implemented.
As there is no way for the kernel to detect file changes, the kernel
ignores the cached file integrity results and re-measures, re-appraises,
and re-audits the file.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Dongsu Park <dongsu@kinvolk.io>
Cc: Alban Crequy <alban@kinvolk.io>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The existing BPRM_CHECK functionality in IMA validates against the
credentials of the existing process, not any new credentials that the
child process may transition to. Add an additional CREDS_CHECK target
and refactor IMA to pass the appropriate creds structure. In
ima_bprm_check(), check with both the existing process credentials and
the credentials that will be committed when the new process is started.
This will not change behaviour unless the system policy is extended to
include CREDS_CHECK targets - BPRM_CHECK will continue to check the same
credentials that it did previously.
After this patch, an IMA policy rule along the lines of:
measure func=CREDS_CHECK subj_type=unconfined_t
will trigger if a process is executed and runs as unconfined_t, ignoring
the context of the parent process. This is in contrast to:
measure func=BPRM_CHECK subj_type=unconfined_t
which will trigger if the process that calls exec() is already executing
in unconfined_t, ignoring the context that the child process executes
into.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Changelog:
- initialize ima_creds_status
|
|
The function inode_cmp_iversion{+raw} is counter-intuitive, because it
returns true when the counters are different and false when these are equal.
Rename it to inode_eq_iversion{+raw}, which will returns true when
the counters are equal and false otherwise.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull integrity updates from James Morris:
"This contains a mixture of bug fixes, code cleanup, and new
functionality. Of note is the integrity cache locking fix, file change
detection, and support for a new EVM portable and immutable signature
type.
The re-introduction of the integrity cache lock (iint) fixes the
problem of attempting to take the i_rwsem shared a second time, when
it was previously taken exclusively. Defining atomic flags resolves
the original iint/i_rwsem circular locking - accessing the file data
vs. modifying the file metadata. Although it fixes the O_DIRECT
problem as well, a subsequent patch is needed to remove the explicit
O_DIRECT prevention.
For performance reasons, detecting when a file has changed and needs
to be re-measured, re-appraised, and/or re-audited, was limited to
after the last writer has closed, and only if the file data has
changed. Detecting file change is based on i_version. For filesystems
that do not support i_version, remote filesystems, or userspace
filesystems, the file was measured, appraised and/or audited once and
never re-evaluated. Now local filesystems, which do not support
i_version or are not mounted with the i_version option, assume the
file has changed and are required to re-evaluate the file. This change
does not address detecting file change on remote or userspace
filesystems.
Unlike file data signatures, which can be included and distributed in
software packages (eg. rpm, deb), the existing EVM signature, which
protects the file metadata, could not be included in software
packages, as it includes file system specific information (eg. i_ino,
possibly the UUID). This pull request defines a new EVM portable and
immutable file metadata signature format, which can be included in
software packages"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
ima/policy: fix parsing of fsuuid
ima: Use i_version only when filesystem supports it
integrity: remove unneeded initializations in integrity_iint_cache entries
ima: log message to module appraisal error
ima: pass filename to ima_rdwr_violation_check()
ima: Fix line continuation format
ima: support new "hash" and "dont_hash" policy actions
ima: re-introduce own integrity cache lock
EVM: Add support for portable signature format
EVM: Allow userland to permit modification of EVM-protected metadata
ima: relax requiring a file signature for new files with zero length
|
|
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
i_version is only supported by a filesystem when the SB_I_VERSION
flag is set. This patch tests for the SB_I_VERSION flag before using
i_version. If we can't use i_version to detect a file change then we
must assume the file has changed in the last_writer path and remeasure
it.
On filesystems without i_version support IMA used to measure a file
only once and didn't detect any changes to a file. With this patch
IMA now works properly on these filesystems.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
Simple but useful message log to the user in case of module appraise is
forced and fails due to the lack of file descriptor, that might be
caused by kmod calls to compressed modules.
Signed-off-by: Bruno E. O. Meneguele <brdeoliv@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
ima_rdwr_violation_check() retrieves the full path of a measured file by
calling ima_d_path(). If process_measurement() calls this function, it
reuses the pointer and passes it to the functions to measure/appraise/audit
an accessed file.
After commit bc15ed663e7e ("ima: fix ima_d_path() possible race with
rename"), ima_d_path() first tries to retrieve the full path by calling
d_absolute_path() and, if there is an error, copies the dentry name to the
buffer passed as argument.
However, ima_rdwr_violation_check() passes to ima_d_path() the pointer of a
local variable. process_measurement() might be reusing the pointer to an
area in the stack which may have been already overwritten after
ima_rdwr_violation_check() returned.
Correct this issue by passing to ima_rdwr_violation_check() the pointer of
a buffer declared in process_measurement().
Fixes: bc15ed663e7e ("ima: fix ima_d_path() possible race with rename")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
The builtin ima_appraise_tcb policy, which is specified on the boot
command line, can be replaced with a custom policy, normally early in
the boot process. Custom policies can be more restrictive in some ways,
like requiring file signatures, but can be less restrictive in other
ways, like not appraising mutable files. With a less restrictive policy
in place, files in the builtin policy might not be hashed and labeled
with a security.ima hash. On reboot, files which should be labeled in
the ima_appraise_tcb are not labeled, possibly preventing the system
from booting properly.
To resolve this problem, this patch extends the existing IMA policy
actions "measure", "dont_measure", "appraise", "dont_appraise", and
"audit" with "hash" and "dont_hash". The new "hash" action will write
the file hash as security.ima, but without requiring the file to be
appraised as well.
For example, the builtin ima_appraise_tcb policy includes the rule,
"appraise fowner=0". Adding the "hash fowner=0" rule to a custom
policy, will cause the needed file hashes to be calculated and written
as security.ima xattrs.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
|
|
i_version is only supported by a filesystem when the SB_I_VERSION
flag is set. This patch tests for the SB_I_VERSION flag before using
i_version. If we can't use i_version to detect a file change then we
must assume the file has changed in the last_writer path and remeasure
it.
On filesystems without i_version support IMA used to measure a file
only once and didn't detect any changes to a file. With this patch
IMA now works properly on these filesystems.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
Before IMA appraisal was introduced, IMA was using own integrity cache
lock along with i_mutex. process_measurement and ima_file_free took
the iint->mutex first and then the i_mutex, while setxattr, chmod and
chown took the locks in reverse order. To resolve the potential deadlock,
i_mutex was moved to protect entire IMA functionality and the redundant
iint->mutex was eliminated.
Solution was based on the assumption that filesystem code does not take
i_mutex further. But when file is opened with O_DIRECT flag, direct-io
implementation takes i_mutex and produces deadlock. Furthermore, certain
other filesystem operations, such as llseek, also take i_mutex.
More recently some filesystems have replaced their filesystem specific
lock with the global i_rwsem to read a file. As a result, when IMA
attempts to calculate the file hash, reading the file attempts to take
the i_rwsem again.
To resolve O_DIRECT related deadlock problem, this patch re-introduces
iint->mutex. But to eliminate the original chmod() related deadlock
problem, this patch eliminates the requirement for chmod hooks to take
the iint->mutex by introducing additional atomic iint->attr_flags to
indicate calling of the hooks. The allowed locking order is to take
the iint->mutex first and then the i_rwsem.
Original flags were cleared in chmod(), setxattr() or removwxattr()
hooks and tested when file was closed or opened again. New atomic flags
are set or cleared in those hooks and tested to clear iint->flags on
close or on open.
Atomic flags are following:
* IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown,
chgrp) and file attributes have changed. On file open, it causes IMA
to clear iint->flags to re-evaluate policy and perform IMA functions
again.
* IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called
and extended attributes have changed. On file open, it causes IMA to
clear iint->flags IMA_DONE_MASK to re-appraise.
* IMA_UPDATE_XATTR - indicates that security.ima needs to be updated.
It is cleared if file policy changes and no update is needed.
* IMA_DIGSIG - indicates that file security.ima has signature and file
security.ima must not update to file has on file close.
* IMA_MUST_MEASURE - indicates the file is in the measurement policy.
Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in
the VFS inode instead")
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
When the user requests MODULE_CHECK policy and its kernel is compiled
with CONFIG_MODULE_SIG_FORCE not set, all modules would not load, just
those loaded in initram time. One option the user would have would be
set a kernel cmdline param (module.sig_enforce) to true, but the IMA
module check code doesn't rely on this value, it checks just
CONFIG_MODULE_SIG_FORCE.
This patch solves this problem checking for the exported value of
module.sig_enforce cmdline param intead of CONFIG_MODULE_SIG_FORCE,
which holds the effective value (CONFIG || param).
Signed-off-by: Bruno E. O. Meneguele <brdeoliv@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
The hash_setup function always sets the hash_setup_done flag, even
when the hash algorithm is invalid. This prevents the default hash
algorithm defined as CONFIG_IMA_DEFAULT_HASH from being used.
This patch sets hash_setup_done flag only for valid hash algorithms.
Fixes: e7a2ad7eb6f4 "ima: enable support for larger default filedata hash
algorithms"
Signed-off-by: Boshi Wang <wangboshi@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
The CONFIG_IMA_LOAD_X509 and CONFIG_EVM_LOAD_X509 options permit
loading x509 signed certificates onto the trusted keyrings without
verifying the x509 certificate file's signature.
This patch replaces the call to the integrity_read_file() specific
function with the common kernel_read_file_from_path() function.
To avoid verifying the file signature, this patch defines
READING_X509_CERTFICATE.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
All files matching a "measure" rule must be included in the IMA
measurement list, even when the file hash cannot be calculated.
Similarly, all files matching an "audit" rule must be audited, even when
the file hash can not be calculated.
The file data hash field contained in the IMA measurement list template
data will contain 0's instead of the actual file hash digest.
Note:
In general, adding, deleting or in anyway changing which files are
included in the IMA measurement list is not a good idea, as it might
result in not being able to unseal trusted keys sealed to a specific
TPM PCR value. This patch not only adds file measurements that were
not previously measured, but specifies that the file hash value for
these files will be 0's.
As the IMA measurement list ordering is not consistent from one boot
to the next, it is unlikely that anyone is sealing keys based on the
IMA measurement list. Remote attestation servers should be able to
process these new measurement records, but might complain about
these unknown records.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
|
|
Otherwise some mask and inmask tokens with MAY_APPEND flag may not work
as expected.
Signed-off-by: Lans Zhang <jia.zhang@windriver.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
On failure to return a pathname from ima_d_path(), a pointer to
dname is returned, which is subsequently used in the IMA measurement
list, the IMA audit records, and other audit logging. Saving the
pointer to dname for later use has the potential to race with rename.
Intead of returning a pointer to dname on failure, this patch returns
a pointer to a copy of the filename.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
|
|
The builtin and single custom templates are currently stored in an
array. In preparation for being able to restore a measurement list
containing multiple builtin/custom templates, this patch stores the
builtin and custom templates as a linked list. This will permit
defining more than one custom template per boot.
Link: http://lkml.kernel.org/r/1480554346-29071-8-git-send-email-zohar@linux.vnet.ibm.com
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andreas Steffen <andreas.steffen@strongswan.org>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Ima tries to call ->setxattr() on overlayfs dentry after having locked
underlying inode, which results in a deadlock.
Reported-by: Krisztian Litkey <kli@iki.fi>
Fixes: 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # v4.2
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
IMA avoids re-measuring files by storing the current state as a flag in
the integrity cache. It will then skip adding a new measurement log entry
if the cache reports the file as already measured.
If a policy measures an already measured file to a new PCR, the measurement
will not be added to the list. This patch implements a new bitfield for
specifying which PCR the file was measured into, rather than if it was
measured.
Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
The IMA measurement list entries include the Kconfig defined PCR value.
This patch defines a new ima_template_entry field for including the PCR
as specified in the policy rule.
Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
Different policy rules may extend different PCRs. This patch retrieves
the specific PCR for the matched rule. Subsequent patches will include
the rule specific PCR in the measurement list and extend the appropriate
PCR.
Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
Commit 3034a14 "ima: pass 'opened' flag to identify newly created files"
stopped identifying empty files as new files. However new empty files
can be created using the mknodat syscall. On systems with IMA-appraisal
enabled, these empty files are not labeled with security.ima extended
attributes properly, preventing them from subsequently being opened in
order to write the file data contents. This patch defines a new hook
named ima_post_path_mknod() to mark these empty files, created using
mknodat, as new in order to allow the file data contents to be written.
In addition, files with security.ima xattrs containing a file signature
are considered "immutable" and can not be modified. The file contents
need to be written, before signing the file. This patch relaxes this
requirement for new files, allowing the file signature to be written
before the file contents.
Changelog:
- defer identifying files with signatures stored as security.ima
(based on Dmitry Rozhkov's comments)
- removing tests (eg. dentry, dentry->d_inode, inode->i_size == 0)
(based on Al's review)
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Al Viro <<viro@zeniv.linux.org.uk>
Tested-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
|
|
Add support for measuring and appraising the IMA policy itself.
Changelog v4:
- use braces on both if/else branches, even if single line on one of the
branches - Dmitry
- Use the id mapping - Dmitry
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Petko Manolov <petkan@mip-labs.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
|
