| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 023f124a64174c47e18340ded7e2a39b96eb9523 ]
Kernel cross-compilation with BUILDTIME_MCOUNT_SORT produces zeroed
mcount values if the build-host endianness does not match the ELF
file endianness.
The mcount values array is converted from ELF file
endianness to build-host endianness during initialization in
fill_relocs()/fill_addrs(). Avoid extra conversion of these values during
weak-function zeroing; otherwise, they do not match nm-parsed addresses
and all mcount values are zeroed out.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/patch.git-dca31444b0f1.your-ad-here.call-01743554658-ext-8692@work.hours
Fixes: ef378c3b8233 ("scripts/sorttable: Zero out weak functions in mcount_loc table")
Reported-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reported-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Closes: https://lore.kernel.org/all/your-ad-here.call-01743522822-ext-4975@work.hours/
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dc208c69c033d3caba0509da1ae065d2b5ff165f ]
ARM 64 uses -fpatchable-function-entry=4,2 which adds padding before the
function and the addresses in the mcount_loc point there instead of the
function entry that is returned by nm. In order to find a function from nm
to make sure it's not an unused weak function, the entries in the
mcount_loc section needs to match the entries from nm. Since it can be an
instruction before the entry, add a before_func variable that ARM 64 can
set to 8, and if the mcount_loc entry is within 8 bytes of the nm function
entry, then it will be considered a match.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: "Arnd Bergmann" <arnd@arndb.de>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/20250225182054.815536219@goodmis.org
Fixes: ef378c3b82338 ("scripts/sorttable: Zero out weak functions in mcount_loc table")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 46514b3c2c17c67cefe84b0c1a59e0aaf6093131 ]
When ARM 64 is compiled with gcc, the mcount_loc section will be filled
with zeros and the addresses will be located in the Elf_Rela sections. To
sort the mcount_loc section, the addresses from the Elf_Rela need to be
placed into an array and that is sorted.
But when ARM 64 is compiled with clang, it does it the same way as other
architectures and leaves the addresses as is in the mcount_loc section.
To handle both cases, ARM 64 will first try to sort the Elf_Rela section,
and if it doesn't find any functions, it will then fall back to the
sorting of the addresses in the mcount_loc section itself.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/20250225182054.648398403@goodmis.org
Fixes: b3d09d06e052 ("arm64: scripts/sorttable: Implement sorting mcount_loc at boot for arm64")
Reported-by: "Arnd Bergmann" <arnd@arndb.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/893cd8f1-8585-4d25-bf0f-4197bf872465@app.fastmail.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ef378c3b8233855497a414b9d67bf22592c928a4 ]
When a function is annotated as "weak" and is overridden, the code is not
removed. If it is traced, the fentry/mcount location in the weak function
will be referenced by the "__mcount_loc" section. This will then be added
to the available_filter_functions list. Since only the address of the
functions are listed, to find the name to show, a search of kallsyms is
used.
Since kallsyms will return the function by simply finding the function
that the address is after but before the next function, an address of a
weak function will show up as the function before it. This is because
kallsyms does not save names of weak functions. This has caused issues in
the past, as now the traced weak function will be listed in
available_filter_functions with the name of the function before it.
At best, this will cause the previous function's name to be listed twice.
At worse, if the previous function was marked notrace, it will now show up
as a function that can be traced. Note that it only shows up that it can
be traced but will not be if enabled, which causes confusion.
https://lore.kernel.org/all/20220412094923.0abe90955e5db486b7bca279@kernel.org/
The commit b39181f7c6907 ("ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid
adding weak function") was a workaround to this by checking the function
address before printing its name. If the address was too far from the
function given by the name then instead of printing the name it would
print: __ftrace_invalid_address___<invalid-offset>
The real issue is that these invalid addresses are listed in the ftrace
table look up which available_filter_functions is derived from. A place
holder must be listed in that file because set_ftrace_filter may take a
series of indexes into that file instead of names to be able to do O(1)
lookups to enable filtering (many tools use this method).
Even if kallsyms saved the size of the function, it does not remove the
need of having these place holders. The real solution is to not add a weak
function into the ftrace table in the first place.
To solve this, the sorttable.c code that sorts the mcount regions during
the build is modified to take a "nm -S vmlinux" input, sort it, and any
function listed in the mcount_loc section that is not within a boundary of
the function list given by nm is considered a weak function and is zeroed
out.
Note, this does not mean they will remain zero when booting as KASLR
will still shift those addresses. To handle this, the entries in the
mcount_loc section will be ignored if they are zero or match the
kaslr_offset() value.
Before:
~# grep __ftrace_invalid_address___ /sys/kernel/tracing/available_filter_functions | wc -l
551
After:
~# grep __ftrace_invalid_address___ /sys/kernel/tracing/available_filter_functions | wc -l
0
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250218200022.883095980@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5fb964f5ba53afda0e2b6dbc00b8205461ffe04a ]
The sorting of the mcount_loc section is done directly to the section for
x86 and arm32 but it uses a separate array for arm64 as arm64 has the
values for the mcount_loc stored in the rela sections of the vmlinux ELF
file.
In order to use the same code to remove weak functions, always use a
separate array to do the sorting. This requires splitting up the filling
of the array into one function and the placing the contents of the array
back into the rela sections or into the mcount_loc section into a separate
file.
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250218200022.710676551@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a0265659322540d656727b9e132edfb6f06b6c1a ]
The mcount_loc sorting for when the values are stored in the Elf_Rela
entries uses the compare_extable() function to do the compares in the
qsort(). That function does handle byte swapping if the machine being
compiled for is a different endian than the host machine. But the
sort_relocs() function sorts an array that pulled in the values from the
Elf_Rela section and has already done the swapping.
Create two new compare functions that will sort the direct values. One
will sort 32 bit values and the other will sort the 64 bit value. One of
these will be assigned to a compare_values function pointer and that will
be used for sorting the Elf_Rela mcount values.
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250218200022.538888594@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b3d09d06e052e1d754645acea4e4d1e96f81c934 ]
The mcount_loc section holds the addresses of the functions that get
patched by ftrace when enabling function callbacks. It can contain tens of
thousands of entries. These addresses must be sorted. If they are not
sorted at compile time, they are sorted at boot. Sorting at boot does take
some time and does have a small impact on boot performance.
x86 and arm32 have the addresses in the mcount_loc section of the ELF
file. But for arm64, the section just contains zeros. The .rela.dyn
Elf_Rela section holds the addresses and they get patched at boot during
the relocation phase.
In order to sort these addresses, the Elf_Rela needs to be updated instead
of the location in the binary that holds the mcount_loc section. Have the
sorttable code, allocate an array to hold the functions, load the
addresses from the Elf_Rela entries, sort them, then put them back in
order into the Elf_rela entries so that they will be sorted at boot up
without having to sort them during boot up.
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250218200022.373319428@goodmis.org
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1e5f6771c247b28135307058d2cfe3b0153733dc ]
Instead of having a series of function pointers that gets assigned to the
Elf64 or Elf32 versions, put them all into a single structure and use
that. Add the helper function that chooses the structure into the macros
that build the different versions of the elf functions.
Link: https://lore.kernel.org/all/CAHk-=wiafEyX7UgOeZgvd6fvuByE5WXUPh9599kwOc_d-pdeug@mail.gmail.com/
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/20250110075459.13d4b94c@gandalf.local.home
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4acda8edefa1ce66d3de845f1c12745721cd14c3 ]
The get_mcount_loc() does a cheesy trick to find the start_mcount_loc and
stop_mcount_loc values. That trick is:
file_start = popen(" grep start_mcount System.map | awk '{print $1}' ", "r");
and
file_stop = popen(" grep stop_mcount System.map | awk '{print $1}' ", "r");
Those values are stored in the Elf symbol table. Use that to capture those
values. Using the symbol table is more efficient and more robust. The
above could fail if another variable had "start_mcount" or "stop_mcount"
as part of its name.
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/20250105162346.817157047@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 58d87678a0f46c6120904b4326aaf5ebf4454c69 ]
Instead of having the main code live in a header file and included twice
with MACROs that define the Elf structures for 64 bit or 32 bit, move the
code in the C file now that the Elf structures are defined in a union that
has both. All accesses to the Elf structure fields are done through helper
function pointers. If the file being parsed if for a 64 bit architecture,
all the helper functions point to the 64 bit versions to retrieve the Elf
fields. The same is true if the architecture is 32 bit, where the function
pointers will point to the 32 bit helper functions.
Note, when the value of a field can be either 32 bit or 64 bit, a 64 bit
is always returned, as it works for the 32 bit code as well.
This makes the code easier to read and maintain, and it now all exists in
sorttable.c and sorttable.h may be removed.
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/20250107223217.6f7f96a5@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1b649e6ab8dc9188d82c64069493afe66ca0edad ]
The mcount sorting defines uint_t to uint64_t on 64bit architectures and
uint32_t on 32bit architectures. It can work with just using uint64_t as
that will hold the values of both, and they are not used to point into the
ELF file.
sizeof(uint_t) is used for defining the size of the mcount_loc section.
Instead of using a type, define long_size and use that instead. This will
allow the header code to be moved into the C file as generic functions and
not need to include sorttable.h twice, once for 64bit and once for 32bit.
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/20250105162346.373528925@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 17bed33ac12f011f4695059960e1b1d6457229a7 ]
In order to remove the double #include of sorttable.h for 64 and 32 bit
to create duplicate functions, add helper functions for Elf_Sym. This
will create a function pointer for each helper that will get assigned to
the appropriate function to handle either the 64bit or 32bit version.
This also removes the last references of etype and _r() macros from the
sorttable.h file as their references are now just defined in the
appropriate architecture version of the helper functions. All read
functions now exist in the helper functions which makes it easier to
maintain, as the helper functions define the necessary architecture sizes.
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/20250105162346.185740651@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 67afb7f504400e5b4e5ff895459fbb3eb63d4450 ]
In order to remove the double #include of sorttable.h for 64 and 32 bit
to create duplicate functions, add helper functions for Elf_Shdr. This
will create a function pointer for each helper that will get assigned to
the appropriate function to handle either the 64bit or 32bit version.
This also moves the _r()/r() wrappers for the Elf_Shdr references that
handle endian and size differences between the different architectures,
into the helper function and out of the open code which is more error
prone.
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/20250105162345.940924221@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1dfb59a228dde59ad7d99b2fa2104e90004995c7 ]
In order to remove the double #include of sorttable.h for 64 and 32 bit
to create duplicate functions, add helper functions for Elf_Ehdr. This
will create a function pointer for each helper that will get assigned to
the appropriate function to handle either the 64bit or 32bit version.
This also moves the _r()/r() wrappers for the Elf_Ehdr references that
handle endian and size differences between the different architectures,
into the helper function and out of the open code which is more error
prone.
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/20250105162345.736369526@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 200d015e73b4da69bcd8212a7c58695452b12bad ]
In order to remove the double #include of sorttable.h for 64 and 32 bit
to create duplicate functions for both, replace the Elf_Sym macro with a
union that defines both Elf64_Sym and Elf32_Sym, with field e64 for the
64bit version, and e32 for the 32bit version.
It can then use the macro etype to get the proper value.
This will eventually be replaced with just single functions that can
handle both 32bit and 64bit ELF parsing.
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/20250105162345.528626969@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 545f6cf8f4c9a268e0bab2637f1d279679befdbf ]
In order to remove the double #include of sorttable.h for 64 and 32 bit
to create duplicate functions for both, replace the Elf_Shdr macro with a
union that defines both Elf64_Shdr and Elf32_Shdr, with field e64 for the
64bit version, and e32 for the 32bit version.
It can then use the macro etype to get the proper value.
This will eventually be replaced with just single functions that can
handle both 32bit and 64bit ELF parsing.
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/20250105162345.339462681@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 157fb5b3cfd2cb5950314f926a76e567fc1921c5 ]
In order to remove the double #include of sorttable.h for 64 and 32 bit
to create duplicate functions for both, replace the Elf_Ehdr macro with a
union that defines both Elf64_Ehdr and Elf32_Ehdr, with field e64 for the
64bit version, and e32 for the 32bit version.
Then a macro etype can be used instead to get to the proper value.
This will eventually be replaced with just single functions that can
handle both 32bit and 64bit ELF parsing.
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/20250105162345.148224465@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7ffc0d0819f438779ed592e2e2e3576f43ce14f0 ]
Instead of having the compare_extable() part of the sorttable.h header
where it get's defined twice, since it is a very simple function, just
define it twice in sorttable.c, and then it can use the proper read
functions for the word size and endianess and the Elf_Addr macro can be
removed from sorttable.h.
Also add a micro optimization. Instead of:
if (a < b)
return -1;
if (a > b)
return 1;
return 0;
That can be shorten to:
if (a < b)
return -1;
return a > b;
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/20250105162344.945299671@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 66990c003306c240d570b3ba274ec4f68cf18c91 ]
The ORC code reads the section information directly from the file. This
currently works because the default read function is for 64bit little
endian machines. But if for some reason that ever changes, this will
break. Instead of having a surprise breakage, use the _r() functions that
will read the values from the file properly.
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/20250105162344.721480386@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6f2c2f93a190467cebd6ebd03feb49514fead5ca ]
The code had references to initialize the Elf_Rel relocation tables, but
it was never used. Remove it.
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/20250105162344.515342233@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4f48a28b37d594dab38092514a42ae9f4b781553 ]
The code of sorttable.h was copied from the recordmcount.h which defined
various write functions for different sizes (2, 4, 8 byte lengths). But
sorttable only uses the 4 byte writes. Remove the extra versions as they
are not used.
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/20250105162344.314385504@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 28b24394c6e9a3166fcb4480cba054562526657c ]
The code of sorttable.h was copied from the recordmcount.h which defined
a bunch of Elf MACROs so that they could be used between 32bit and 64bit
functions. But there's several MACROs that sorttable.h does not use but
was copied over. Remove them to clean up the code.
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/20250105162344.128870118@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4a44b17406cb5a93f90af3df9392b3a45eb336fb upstream.
The Makefile version of rustc-option currently checks whether the option
exists for the host target instead of the target actually being compiled
for. It was done this way in commit 46e24a545cdb ("rust: kasan/kbuild:
fix missing flags on first build") to avoid a circular dependency on
target.json. However, because of this, rustc-option currently does not
function when cross-compiling from x86_64 to aarch64 if
CONFIG_SHADOW_CALL_STACK is enabled. This is because KBUILD_RUSTFLAGS
contains -Zfixed-x18 under this configuration. Since that flag does not
exist on the host target, rustc-option runs into a compilation failure
every time, leading to all flags being rejected as unsupported.
To fix this, update rustc-option to pass a --target parameter so that
the host target is not used. For targets using target.json, use a
built-in target that is as close as possible to the target created with
target.json to avoid the circular dependency on target.json.
One scenario where this causes a boot failure:
* Cross-compiled from x86_64 to aarch64.
* With CONFIG_SHADOW_CALL_STACK=y
* With CONFIG_KASAN_SW_TAGS=y
* With CONFIG_KASAN_INLINE=n
Then the resulting kernel image will fail to boot when it first calls
into Rust code with a crash along the lines of "Unable to handle kernel
paging request at virtual address 0ffffffc08541796". This is because the
call threshold is not specified, so rustc will inline kasan operations,
but the kasan shadow offset is not specified, which leads to the inlined
kasan instructions being incorrect.
Note that the -Zsanitizer=kernel-hwaddress parameter itself does not
lead to a rustc-option failure despite being aarch64-specific because
RUSTFLAGS_KASAN has not yet been added to KBUILD_RUSTFLAGS when
rustc-option is evaluated by the kasan Makefile.
Cc: stable@vger.kernel.org
Fixes: 46e24a545cdb ("rust: kasan/kbuild: fix missing flags on first build")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260507-rustc-option-cross-v2-1-2f650a49c2b5@google.com
[ Edited slightly:
- Reset variable to avoid using the environment.
- Use a simply expanded variable flavor for simplicity.
- Export variable so that behavior in sub-`make`s is consistent.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This matches other variables. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
commit 905b06d32a52afe32fcf5f30cf298c9ea6359f11 upstream.
Starting with Rust 1.98.0 (expected 2026-08-20), the target spec will not
support `x86-softfloat` anymore [1]. Instead, `softfloat` should be used,
which is an alias. Otherwise, one gets:
error: error loading target specification: rustc-abi: invalid rustc abi: 'x86-softfloat'. allowed values: 'x86-sse2', 'softfloat' at line 3 column 32
|
= help: run `rustc --print target-list` for a list of built-in targets
Thus conditionally use one or the other depending on the version.
The alias has existed since Rust 1.95.0 (released 2026-04-16) [2], but
use the newer version instead to avoid changing how the build works for
existing compilers, at least until more testing takes place.
Cc: Ralf Jung <post@ralfj.de>
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/157151 [1]
Link: https://github.com/rust-lang/rust/pull/151154 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260530114925.260754-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 202550713128da20d9381d6d2dc0f6b73839f434 ]
The package versioning scheme does not enable smooth upgrades from "rc"
releases to the corresponding stable releases (e.g. 7.0.0-rc7 -> 7.0.0)
because pacman considers that a downgrade due to the underscore in
pkgver (e.g. 7.0.0_rc7), see e.g. vercmp(8) for an explanation of the
package version comparison used by pacman. Package versions which are
derived from said releases (e.g. built from git revisions) are
similarly affected. Fix this by modifying pkgver in order to remove the
hyphen from kernel versions containing "-rcN", where N is a
non-negative integer.
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260515215913.92481-1-viktor_jaegerskuepper@freenet.de
Fixes: c8578539deba ("kbuild: add script and target to generate pacman package")
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2452dcf4d740effff5aa71b7f6529ee8c04fd8f6 ]
Commit e2c318225ac1 ("kbuild: deb-pkg: add
pkg.linux-upstream.nokernelheaders build profile") changed how
install-extmod-build gets called, making it always rebuild the host
programs below scripts/ if HOSTCC wasn't specified with its full triplet
on the make command line. That is, apparently, needed to fix up commit
f1d87664b82a ("kbuild: cross-compile linux-headers package when
possible") for cross-compiles. However, in the much more common case of
non-cross-compile builds this will lead to unnecessary rebuilding of
host tools including gcc plugins. This, in turn, will lead to a full
kernel rebuild on the next 'make bindeb-pkg' which is unfortunate.
Avoid that by only triggering the rebuild of host tools for actual
cross-compile builds.
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Fixes: e2c318225ac1 ("kbuild: deb-pkg: add pkg.linux-upstream.nokernelheaders build profile")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260402145116.1010901-1-minipli@grsecurity.net
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a261f6dff3c1653c19c065c3b3650c625447b8a7 upstream.
While testing ABI changes across all architectures, I found that abidiff
sometimes produces nonsensical output. Further debugging identified
missing or broken libelf support for architecture specific relocations
in ET_REL binaries as the source of the problem[1].
Change the script to no longer produce a relocatable object file but
instead create a shared library for each header. This makes abidiff
work for all of the architectures in upstream linux kernels.
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=33869
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260306163309.2015837-2-arnd@kernel.org
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch is for stable only. Commit 5a09df20872c ("scripts/dtc: Update
to upstream version v1.7.2-69-g53373d135579") upstream applied it as
part of a regular scripts/dtc sync, which may be unsuitable for older
versions of stable where the warning it fixes is present.
A recent strengthening of -Wunused-but-set-variable (enabled with -Wall)
in clang under a new subwarning, -Wunused-but-set-global, points out an
unused static global variable in dtc-lexer.lex.c (compiled from
dtc-lexer.l):
scripts/dtc/dtc-lexer.lex.c:641:12: warning: variable 'dts_version' set but not used [-Wunused-but-set-global]
641 | static int dts_version = 1;
| ^
Remove it to clear up the warning, as it is truly unused.
Fixes: 658f29a51e98 ("of/flattree: Update dtc to current mainline.")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 36c619f6bd793493294becb10a02fea370b67a91 ]
Add IDE support for host-side scripts written in Rust. This support has
been missing since these scripts were initially added in commit
9a8ff24ce584 ("scripts: add `generate_rust_target.rs`"), thus add it.
Change the existing instance of extension stripping to
`pathlib.Path.stem` to maintain code consistency.
Fixes: 9a8ff24ce584 ("scripts: add `generate_rust_target.rs`")
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Link: https://patch.msgid.link/20260122-rust-analyzer-scripts-v1-1-ff6ba278170e@kernel.org
Signed-off-by: Tamir Duberstein <tamird@kernel.org>
[ changed `[std]` dep to `["std"]` and kept untyped `is_root_crate()` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b2603f8ac8217bc59f5c7f248ac248423b9b99cb ]
When testing a `clang` upgrade with Rust Binder, Alice encountered [1] a
build failure caused by `bindgen` not translating some symbols related to
tracepoints. This was caused by commit 2e770edd8ce1 ("[libclang] Compute
the right spelling location") changing the behavior of a function exposed
by `libclang`. `bindgen` fixed the regression in commit 600f63895f73
("Use clang_getFileLocation instead of clang_getSpellingLocation").
However, the regression fix is only available in `bindgen` versions
0.69.5 or later (it was backported for 0.69.x). This means that when
older bindgen versions are used with new versions of `libclang`, `bindgen`
may do the wrong thing, which could lead to a build failure.
Alice encountered the bug with some header files related to tracepoints,
but it could also cause build failures in other circumstances. Thus,
always emit a warning when using an old `bindgen` with a new `libclang`
so that other people do not have to spend time chasing down the same
bug.
However, testing just the version is inconvenient, since distributions
do patch their packages without changing the version, so I reduced the
issue into the following piece of code that can trigger the issue:
#define F(x) int x##x
F(foo);
In particular, an unpatched `bindgen` will ignore the macro expansion
and thus not provide a declaration for the exported `int`.
Thus add a build test to `rust_is_available.sh` using the code above
(that is only triggered if the versions appear to be affected), following
what we did for the 0.66.x issue.
Moreover, I checked the status in the major distributions we have
instructions for:
- Fedora 41 was affected but is now OK, since it now ships `bindgen`
0.69.5.
Thanks Ben for the quick reply on the updates that were ongoing.
Fedora 40 and earlier are OK (older `libclang`, and they also now
carry `bindgen` 0.69.5).
- Debian Sid was affected but is now OK, since they now ship a patched
`bindgen` binary (0.66.1-7+b3). The issue was reported to Debian by
email and then as a bug report [2].
Thanks NoisyCoil and Matthias for the quick replies. NoisyCoil handled
the needed updates. Debian may upgrade to `bindgen` 0.70.x, too.
Debian Testing is OK (older `libclang` so far).
- Ubuntu non-LTS (oracular) is affected. The issue was reported to Ubuntu
by email and then as a bug report [3].
Ubuntu LTS is not affected (older `libclang` so far).
- Arch Linux, Gentoo Linux and openSUSE should be OK (newer `bindgen` is
provided). Nix as well (older `libclang` so far).
This issue was also added to our "live list" that tracks issues around
distributions [4].
Cc: Ben Beasley <code@musicinmybrain.net>
Cc: NoisyCoil <noisycoil@tutanota.com>
Cc: Matthias Geiger <werdahias@riseup.net>
Link: https://lore.kernel.org/rust-for-linux/20241030-bindgen-libclang-warn-v1-1-3a7ba9fedcfe@google.com/ [1]
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1086510 [2]
Link: https://bugs.launchpad.net/ubuntu/+source/rust-bindgen-cli/+bug/2086639 [3]
Link: https://github.com/Rust-for-Linux/linux/issues/1127 [4]
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241111201607.653149-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d1db4118489fffd2b2f612140b7acbb477880839 upstream.
The Assisted-by tag was introduced in
Documentation/process/coding-assistants.rst for attributing AI tool
contributions to kernel patches. However, checkpatch.pl did not recognize
this tag, causing two issues:
WARNING: Non-standard signature: Assisted-by:
ERROR: Unrecognized email address: 'AGENT_NAME:MODEL_VERSION'
Fix this by:
1. Adding Assisted-by to the recognized $signature_tags list
2. Skipping email validation for Assisted-by lines since they use the
AGENT_NAME:MODEL_VERSION format instead of an email address
3. Warning when the Assisted-by value doesn't match the expected format
Link: https://lkml.kernel.org/r/20260311215818.518930-1-sashal@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Reported-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9b4744d8eda2824041064a5639ccbb079850914d upstream.
Use `pathlib.Path.read_text()` to avoid leaking file descriptors.
Fixes: 8c4555ccc55c ("scripts: add `generate_rust_analyzer.py`")
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Link: https://patch.msgid.link/20260127-rust-analyzer-fd-leak-v2-1-1bb55b9b6822@kernel.org
Signed-off-by: Tamir Duberstein <tamird@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 459cb3c054c2352bb321648744b620259a716b60 ]
When CONFIG_DEBUG_INFO_BTF_MODULES is enabled and vmlinux is available,
Makefile.modfinal and gen-btf.sh will try to use resolve_btfids on the
module .ko. install-extmod-build currently does not package
resolve_btfids, so that step fails.
Package resolve_btfids if it may be used.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260226-kbuild-resolve_btfids-v1-1-2bf38b93dfe7@linutronix.de
[nathan: Small commit message tweaks]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3cd9763ce4ad999d015cf0734e6b968cead95077 ]
Building a size optimized ppc64 kernel (-Os), gcc emits more FP
save/restore symbols, that the linker generates on demand into the
.sfpr section. Explicitly allow-list those in scripts/mod/modpost.c,
too. They are needed for the amdgpu in-kernel floating point support.
MODPOST Module.symvers
ERROR: modpost: "_restfpr_20" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost: "_restfpr_26" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost: "_restfpr_22" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost: "_savegpr1_27" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost: "_savegpr1_25" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost: "_restfpr_28" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost: "_savegpr1_29" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost: "_savefpr_20" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost: "_savefpr_22" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost: "_restfpr_15" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
WARNING: modpost: suppressed 56 unresolved symbol warnings because there were too many)
Signed-off-by: René Rebe <rene@exactco.de>
Link: https://patch.msgid.link/20251123.131330.407910684435629198.rene@exactco.de
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 5157c328edb35bac05ce77da473c3209d20e0bbb upstream.
Add a dependency edge from `compiler_builtins` to `core` to
`scripts/generate_rust_analyzer.py` to match `rust/Makefile`. This has
been incorrect since commit 8c4555ccc55c ("scripts: add
`generate_rust_analyzer.py`")
Signed-off-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Jesung Yang <y.j3ms.n@gmail.com>
Acked-by: Benno Lossin <lossin@kernel.org>
Fixes: 8c4555ccc55c ("scripts: add `generate_rust_analyzer.py`")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250723-rust-analyzer-pin-init-v1-1-3c6956173c78@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ac3c50b9a24e9ebeb585679078d6c47922034bb6 upstream.
Use `core_edition` for all sysroot crates rather than just core as all
were updated to edition 2024 in Rust 1.87.
Fixes: f4daa80d6be7 ("rust: compile libcore with edition 2024 for 1.87+")
Signed-off-by: Tamir Duberstein <tamird@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260116-rust-analyzer-sysroot-v2-1-094aedc33208@kernel.org
[ Added `>`s to make the quote a single block. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1b83ef9f7ad4635c913b80ef5e718f95f48e85af upstream.
With nixpkgs's rustc, rust-src component is not bundled
with the compiler by default and is instead provided from
a separate store path, so this assumption does not hold.
The assertion assumes these paths are in the same location
which causes `make LLVM=1 rust-analyzer` to fail on NixOS.
Link: https://rust-for-linux.zulipchat.com/#narrow/stream/x/topic/x/near/565284250
Signed-off-by: Onur Özkan <work@onurozkan.dev>
Reviewed-by: Gary Guo <gary@garyguo.net>
Fixes: fe992163575b ("rust: Support latest version of `rust-analyzer`")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251224135343.32476-1-work@onurozkan.dev
[ Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit af20ae33e7dd949f2e770198e74ac8f058cb299d upstream.
`rustfmt` is configured via the `.rustfmt.toml` file in the source tree,
and we apply `rustfmt` to the macro expanded sources generated by the
`.rsi` target.
However, under an `O=` pointing to an external folder (i.e. not just
a subdir), `rustfmt` will not find the file when checking the parent
folders. Since the edition is configured in this file, this can lead to
errors when it encounters newer syntax, e.g.
error: expected one of `!`, `.`, `::`, `;`, `?`, `where`, `{`, or an operator, found `"rust_minimal"`
--> samples/rust/rust_minimal.rsi:29:49
|
28 | impl ::kernel::ModuleMetadata for RustMinimal {
| - while parsing this item list starting here
29 | const NAME: &'static ::kernel::str::CStr = c"rust_minimal";
| ^^^^^^^^^^^^^^ expected one of 8 possible tokens
30 | }
| - the item list ends here
|
= note: you may be trying to write a c-string literal
= note: c-string literals require Rust 2021 or later
= help: pass `--edition 2024` to `rustc`
= note: for more on editions, read https://doc.rust-lang.org/edition-guide
A workaround is to use `RUSTFMT=n`, which is documented in the `Makefile`
help for cases where macro expanded source may happen to break `rustfmt`
for other reasons, but this is not one of those cases.
One solution would be to pass `--edition`, but we want `rustfmt` to
use the entire configuration, even if currently we essentially use the
default configuration.
Thus explicitly give the path to the config file to `rustfmt` instead.
Reported-by: Alice Ryhl <aliceryhl@google.com>
Fixes: 2f7ab1267dc9 ("Kbuild: add Rust support")
Cc: stable@vger.kernel.org
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260115183832.46595-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit baaecfcac559bcac73206df447eb5c385fa22f2a ]
When running make nconfig with a static linking host toolchain,
the libraries are linked in an incorrect order,
resulting in errors similar to the following:
$ MAKEFLAGS='HOSTCC=cc\ -static' make nconfig
/usr/bin/ld: /usr/lib64/gcc/x86_64-unknown-linux-gnu/14.2.1/../../../../lib64/libpanel.a(p_new.o): in function `new_panel':
(.text+0x13): undefined reference to `_nc_panelhook_sp'
/usr/bin/ld: (.text+0x6c): undefined reference to `_nc_panelhook_sp'
Fixes: 1c5af5cf9308 ("kconfig: refactor ncurses package checks for building mconf and nconf")
Signed-off-by: Arusekk <floss@arusekk.pl>
Link: https://patch.msgid.link/20260110114808.22595-1-floss@arusekk.pl
[nsc: Added comment about library order]
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b08fc4d0ec2466558f6d5511434efdfabbddf2a6 ]
Since commit e7e2941300d2 ("kbuild: split device tree build rules into
scripts/Makefile.dtbs"), it is no longer possible to compile a device tree
blob that is not specified in a make rule
like:
dtb-$(CONFIG_FOO) += foo.dtb
Before the mentioned commit, one could copy a dts file to e.g.
arch/arm64/boot/dts/ (or a new subdirectory) and then convert it to a dtb
file using:
make ARCH=arm64 foo.dtb
In this scenario, both 'dtb-y' and 'dtb-' are empty, and the inclusion of
scripts/Makefile.dtbs relies on 'targets' to contain the MAKECMDGOALS. The
value of 'targets', however, is only final later in the code.
Move the conditional include of scripts/Makefile.dtbs down to where the
value of 'targets' is final. Since Makefile.dtbs updates 'always-y' which is
used as a prerequisite in the build rule, the build rule also needs to move
down.
Fixes: e7e2941300d2 ("kbuild: split device tree build rules into scripts/Makefile.dtbs")
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251126100017.1162330-1-thomas.de_schampheleire@nokia.com
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit af61da281f52aba0c5b090bafb3a31c5739850ff ]
When building out-of-tree modules with CONFIG_MODULE_SIG_FORCE=y,
module signing fails because the private key path uses $(srctree)
while the public key path uses $(objtree). Since signing keys are
generated in the build directory during kernel compilation, both
paths should use $(objtree) for consistency.
This causes SSL errors like:
SSL error:02001002:system library:fopen:No such file or directory
sign-file: /kernel-src/certs/signing_key.pem
The issue occurs because:
- sig-key uses: $(srctree)/certs/signing_key.pem (source tree)
- cmd_sign uses: $(objtree)/certs/signing_key.x509 (build tree)
But both keys are generated in $(objtree) during the build.
This complements commit 25ff08aa43e37 ("kbuild: Fix signing issue for
external modules") which fixed the scripts path and public key path,
but missed the private key path inconsistency.
Fixes out-of-tree module signing for configurations with separate
source and build directories (e.g., O=/kernel-out).
Signed-off-by: Mikhail Malyshev <mike.malyshev@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20251015163452.3754286-1-mike.malyshev@gmail.com
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ff5c0466486ba8d07ab2700380e8fd6d5344b4e9 ]
The run_readelf() function reads the entire output of readelf into a
single shell variable. For large object files with extensive debug
information, the size of this variable can exceed the system's
command-line argument length limit.
When this variable is subsequently passed to sed via `echo "${out}"`, it
triggers an "Argument list too long" error, causing the script to fail.
Fix this by redirecting the output of readelf to a temporary file
instead of a variable. The sed commands are then modified to read from
this file, avoiding the argument length limitation entirely.
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 43c2931a95e6b295bfe9e3b90dbe0f7596933e91 ]
Fix bug where make nconfig doesn't initialize the default locale, which
causes ncurses menu borders to be displayed incorrectly (lqqqqk) in
UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY.
Signed-off-by: Jakub Horký <jakub.git@horky.net>
Link: https://patch.msgid.link/20251014144405.3975275-2-jakub.git@horky.net
[nathan: Alphabetize locale.h include]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3927c4a1084c48ef97f11281a0a43ecb2cb4d6f1 ]
Fix bug where make menuconfig doesn't initialize the default locale, which
causes ncurses menu borders to be displayed incorrectly (lqqqqk) in
UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY.
Signed-off-by: Jakub Horký <jakub.git@horky.net>
Link: https://patch.msgid.link/20251014154933.3990990-1-jakub.git@horky.net
[nathan: Alphabetize locale.h include]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a40282dd3c484e6c882e93f4680e0a3ef3814453 upstream.
GCC now runs TODO_verify_il automatically[1], so it is no longer exposed to
plugins. Only use the flag on GCC < 16.
Link: https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=9739ae9384dd7cd3bb1c7683d6b80b7a9116eaf8 [1]
Suggested-by: Christopher Fore <csfore@posteo.net>
Link: https://lore.kernel.org/r/20250920234519.work.915-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8851e27d2cb947ea8bbbe8e812068f7bf5cbd00b upstream.
Starting with Rust 1.91.0 (expected 2025-10-30), the target spec format
has changed the type of the `target-pointer-width` key from string
to integer [1].
Thus conditionally use one or the other depending on the version.
Cc: Waffle Maybe <waffle.lapkin@gmail.com>
Link: https://github.com/rust-lang/rust/pull/144443 [1]
Link: https://lore.kernel.org/r/20250829195525.721664-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 51337a9a3a404fde0f5337662ffc7699793dfeb5 upstream.
GCC doesn't support "hwasan-kernel-mem-intrinsic-prefix", only
"asan-kernel-mem-intrinsic-prefix"[0], while LLVM supports both. This is
already taken into account when checking
"CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX", but not in the KASAN Makefile
adding those parameters when "CONFIG_KASAN_SW_TAGS" is enabled.
Replace the version check with "CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX",
which already validates that mem-intrinsic prefix parameter can be used,
and choose the correct name depending on compiler.
GCC 13 and above trigger "CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX" which
prevents `mem{cpy,move,set}()` being redefined in "mm/kasan/shadow.c"
since commit 36be5cba99f6 ("kasan: treat meminstrinsic as builtins in
uninstrumented files"), as we expect the compiler to prefix those calls
with `__(hw)asan_` instead. But as the option passed to GCC has been
incorrect, the compiler has not been emitting those prefixes, effectively
never calling the instrumented versions of `mem{cpy,move,set}()` with
"CONFIG_KASAN_SW_TAGS" enabled.
If "CONFIG_FORTIFY_SOURCES" is enabled, this issue would be mitigated as
it redefines `mem{cpy,move,set}()` and properly aliases the
`__underlying_mem*()` that will be called to the instrumented versions.
Link: https://lkml.kernel.org/r/20250821120735.156244-1-ada.coupriediaz@arm.com
Link: https://gcc.gnu.org/onlinedocs/gcc-13.4.0/gcc/Optimize-Options.html [0]
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Fixes: 36be5cba99f6 ("kasan: treat meminstrinsic as builtins in uninstrumented files")
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 694174f94ebeeb5ec5cc0e9de9b40c82057e1d95 ]
In case a menu has comment without letters/numbers (eg. characters
matching the regexp '^[^[:alpha:][:digit:]]+$', for example - or *),
hitting space will cycle through those comments, rather than
selecting/deselecting the currently-highlighted option.
This is the behaviour of hitting any letter/digit: jump to the next
option which prompt starts with that letter. The only letters that
do not behave as such are 'y' 'm' and 'n'. Prompts that start with
one of those three letters are instead matched on the first letter
that is not 'y', 'm' or 'n'.
Fix that by treating 'space' as we treat y/m/n, ie. as an action key,
not as shortcut to jump to prompt.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Cherniaev Andrei <dungeonlords789@naver.com>
[masahiro: took from Buildroot, adjusted the commit subject]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f72ed4c6a375e52a3f4b75615e4a89d29d8acea7 ]
If gtk_tree_model_get_iter() fails, gtk_tree_path_free() is not called.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cae9cdbcd9af044810bcceeb43a87accca47c71d ]
The on_treeview2_cursor_changed() handler is connected to both the left
and right tree views, but it hardcodes model2 (the GtkTreeModel of the
right tree view). This is incorrect. Get the associated model from the
view.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
