| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust addendum from Miguel Ojeda:
"A second, tiny pull request later in the merge window with a small
patch to simplify cross-tree development:
'kernel' crate:
- 'prelude' module: add 'zerocopy{,_derive}::IntoBytes'.
This will simplify using 'zerocopy' in several trees next cycle"
* tag 'rust-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: prelude: add `zerocopy{,_derive}::IntoBytes`
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Work around a 'rustc' bug by setting the 'frame-pointer' LLVM
module flag under 'CONFIG_FRAME_POINTER'.
The upcoming Rust 1.98.0 is fixed.
- Doctests: fix incorrect replacement pattern.
'kernel' crate:
- Mark 'Debug' impl as '#[inline]'"
* tag 'rust-fixes-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: Kbuild: set frame-pointer llvm module flag for CONFIG_FRAME_POINTER
rust: doctest: fix incorrect pattern in replacement
rust: bitfield: mark `Debug` impl as `#[inline]`
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver updates from Greg KH:
"Here is the big set of char, misc, iio, fpga, and other small driver
subsystems changes for 7.2-rc1.
Lots of little stuff in here, the majority being of course the IIO
driver updates, as a list they are:
- IIO driver updates and additions
- GPIB driver bugfixes and cleanups
- Android binder driver updates (rust and C version)
- counter driver updates
- MHI driver updates
- mei driver updates
- w1 driver updates
- interconnect driver updates
- Comedi driver fixes and updates
- some obsolete char drivers removed (applicom and dtlk)
- hwtracing driver updates
- other tiny driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
w1: ds2482: Use named initializers for arrays of i2c_device_data
firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version
firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy
coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
iio: chemical: scd30: Replace manual locking with RAII locking
iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
iio: dac: ad5686: create bus ops struct
iio: dac: ad5686: cleanup doc header of local structs
iio: dac: ad5686: add control_sync() for single-channel devices
iio: dac: ad5686: add helpers to handle powerdown masks
iio: dac: ad5686: add of_match table to the spi driver
iio: dac: ad5686: drop enum id
iio: dac: ad5686: remove redundant register definition
iio: dac: ad5686: refactor include headers
iio: adc: ad4080: fix AD4880 chip ID
iio: light: veml3328: add support for new device
dt-bindings: iio: light: veml6030: add veml3328
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "taskstats: fix TGID dead-thread stat retention" (Yiyang Chen)
Fix a taskstats TGID aggregation bug where fields added in the TGID
query path were not preserved after thread exit, and adds a kselftest
covering the regression.
- "lib/tests: string_helpers: Slight improvements" (Andy Shevchenko)
Improve lib/tests/string_helpers_kunit.c a little
- "lib/base64: decode fixes" (Josh Law)
Address minor issues in lib/base64.c
- "selftests/filelock: Make output more kselftestish" (Mark Brown)
Make the output from the ofdlocks test a bit easier for tooling to
work with. Also ignore the generated file
- "uaccess: unify inline vs outline copy_{from,to}_user() selection"
(Yury Norov)
Simplify the usercopy code by removing the selectability of inlining
copy_{from,to}_user().
- "ocfs2: validate inline xattr header consumers" (ZhengYuan Huang)
Fix a number of possible issues in the ocfs2 xattr code
- "lib and lib/cmdline enhancements" (Dmitry Antipov)
Provide additional robustness checking in the cmdline handling code
and its in-kernel testing and selftests
- "cleanup the RAID6 P/Q library" (Christoph Hellwig)
Clean up the RAID6 P/Q library to match the recent updates to the
RAID 5 XOR library and other CRC/crypto libraries
- "ocfs2: harden inode validators against forged metadata" (Michael
Bommarito)
Add three structural checks to OCFS2 dinode validation so malformed
on-disk fields are rejected before ocfs2_populate_inode() copies them
into the in-core inode
- "lib/raid: replace __get_free_pages() call with kmalloc()" (Mike
Rapoport)
Clean up the lib/raid code by using kmalloc() in more places
* tag 'mm-nonmm-stable-2026-06-21-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (108 commits)
ocfs2: fix circular locking dependency in ocfs2_dio_end_io_write
ocfs2: fix NULL h_transaction deref in ocfs2_assure_trans_credits
lib: interval_tree_test: validate benchmark parameters
ocfs2: avoid moving extents to occupied clusters
treewide: fix transposed "sign" typos and update spelling.txt
ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec
fat: reject BPB volumes whose data area starts beyond total sectors
selftests/uevent: increase __UEVENT_BUFFER_SIZE to avoid ENOBUFS on busy systems
lib/test_firmware: allocate the configured into_buf size
fs: efs: remove unneeded debug prints
checkpatch: cuppress warnings when Reported-by: is followed by Link:
MAINTAINERS: add Alexander as a kcov reviewer
mailmap: update Alexander Sverdlin's Email addresses
fs: fat: inode: replace sprintf() with scnprintf()
ocfs2: fix out-of-bounds write in ocfs2_remove_refcount_extent
ocfs2: fix race between ocfs2_control_install_private() and ocfs2_control_release()
ocfs2/dlm: require a ref for locking_state debugfs open
ocfs2: reject FITRIM ranges shorter than a cluster
ocfs2: validate fast symlink target during inode read
ocfs2: add journal NULL check in ocfs2_checkpoint_inode()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "selftests/mm: clean up build output and verbosity" (Li Wang)
Remove some noise from the MM selftests build
- "mm: Free contiguous order-0 pages efficiently" (Ryan Roberts)
Speed up the freeing of a batch of 0-order pages by first scanning
them for coalescing opportunities. This is applicable to vfree() and
to the releasing of frozen pages
- "mm/damon: introduce DAMOS failed region quota charge ratio"
(SeongJae Park)
Address a DAMOS usability issue: The DAMOS quota often exhausts
prematurely because it charges for all memory attempted, causing slow
and inconsistent performance when actions fail on unreclaimable
memory.
To fix this, a new feature lets users set a smaller, flexible quota
charge ratio (via a numerator and denominator) for failed regions.
Since failed actions cause less overhead, reducing their quota cost
ensures more predictable and efficient DAMOS processing
- "selftests/cgroup: improve zswap tests robustness and support large
page sizes" (Li Wang)
Fix various spurious failures and improves the overall robustness of
the cgroup zswap selftests
- "fix MAP_DROPPABLE not supported errno" (Anthony Yznaga)
Fix an issue in the mlock selftests on arm32
- "mm: huge_memory: clean up defrag sysfs with shared" (Breno Leitao)
Some maintenance work in the huge_memory code
- "treewide: fixup gfp_t printks" (Brendan Jackman)
Use the special vprintf() gfp_t conversion in various places
- "mm: Fix vmemmap optimization accounting and initialization" (Muchun
Song)
Fix several bugs in the vmemmap optimization, mainly around incorrect
page accounting and memmap initialization in the DAX and memory
hotplug paths. It also fixes pageblock migratetype initialization and
struct page initialization for ZONE_DEVICE compound pages
- "mm/damon: repost non-hotfix reviewed patches in damon/next tree"
A sprinkle of unrelated minor bugfixes for DAMON
- "mm: remove page_mapped()" (David Hildenbrand)
Remove this function from the tree, replacing it with folio_mapped()
- "mm/damon: let DAMON be paused and resumed" (SeongJae Park)
Allow DAMON to be paused and resumed without losing its current state
- "kasan: hw_tags: Disable tagging for stack and page-tables" (Muhammad
Usama Anjum)
Simplify and speed up kasan by removing its ineffective tagging of
stacks and page tables
- "mm/damon/reclaim,lru_sort: monitor all system rams by default"
(SeongJae Park)
Simplify deployment on diverse hardware like NUMA systems by updating
DAMON_RECLAIM and DAMON_LRU_SORT to automatically monitor the
physical address range covering all System RAM areas by default,
replacing the overly restrictive behavior that only targeted the
single largest memory block to save on negligible overhead
- "mm/damon/sysfs: document filters/ directory as deprecated" (SeongJae
Park)
Update some DAMON docs
- "mm: use spinlock guards for zone lock" (Dmitry Ilvokhin)
Switch zone->lock handling over to using the guard() mechanisms
- "mm/filemap: tighten mmap_miss hit accounting" (fujunjie)
Fix a flaw where the mmap_miss counter over-credited page cache hits
during fault-arounds and page-fault retries. This results in
significant reduction of redundant synchronous mmap readahead I/O,
drastically cutting down execution time and gigabytes read for sparse
random or strided memory access workloads
- "selftests/cgroup: Fix false positive failures in test_percpu_basic"
(Li Wang)
Fix a couple of false-positives in the cgroup kmem selftests
- "mm/damon/reclaim: support monitoring intervals auto-tuning"
(SeongJae Park)
Add a new parameter to DAMON permitting DAMON_RECLAIM to
automatically tune DAMON's sampling and aggregation intervals
- "mm/damon/stat: add kdamond_pid parameter" (SeongJae Park)
Change DAMON_STAT to provide the pid of its kdamond
- "mm/kmemleak: dedupe verbose scan output" (Breno Leitao)
Remove large amounts of duplicated backtraces from the verbose-mode
kmemleak output
- "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 1)" (David
Hildenbrand)
Reduce our use of CONFIG_HAVE_BOOTMEM_INFO_NODE, with a view to
removing it entirely in a later series
- "mm/damon: validate min_region_size to be power of 2" (Liew Rui Yan)
Prevent users from passing a non-power-of-2 value of `addr_unit', as
this later results in undesirable behavior
- "mm: document read_pages and simplify usage" (Frederick Mayle)
- "tools/mm/page-types: Fix misc bugs" (Ye Liu)
Fix three issues in tools/mm/page-types.c
- "mm: misc cleanups from __GFP_UNMAPPED series" (Brendan Jackman)
Implement several cleanups in the page allocator and related code
- "mm, swap: swap table phase IV: unify allocation" (Kairui Song)
Unify the allocation and charging of anon and shmem swap in folios,
provides better synchronization, consolidates the metadata
management, hence dropping the static array and map, and improves
performance
- "mm/damon: introduce data attributes monitoring" (SeongJae Park(
Extend DAMON to monitor general data attributes other than accesses
- "mm/vmalloc: free unused pages on vrealloc() shrink" (Shivam Kalra)
Implement the TODO in vrealloc() to unmap and free unused pages when
shrinking across a page boundary
- "mm/damon: documentation and comment fixes" (niecheng)
- "remove mmap_action success, error hooks" (Lorenzo Stoakes)
Eliminate custom hooks from mmap_action by removing the problematic
success_hook which allowed drivers to improperly access uninitialized
VMAs. It replaces the error_hook with a simple error-code field and
updates the memory char driver accordingly
- "mm/damon: minor improvements for code readability and tests"
(SeongJae Park)
- "mm/damon: fix macro arguments and clarify quota goals doc" (Maksym
Shcherba)
- "userfaultfd: merge fs/userfaultfd.c into mm/userfaultfd.c" (Mike
Rapoport)
- "mm/mglru: improve reclaim loop and dirty folio" (Kairui Song and
others)
Clean up and slightly improves MGLRU's reclaim loop and dirty
writeback handling. Large performance improvements are measured
- "use vma locks for proc/pid/{smaps|numa_maps} reads" (Suren
Baghdasaryan)
Use per-vma locks when reading /proc/pid/smaps and numa_maps similar
to reduce contention on central mmap_lock
- "refactors thpsize_shmem_enabled_store() and thpsize_shmem_enabled_show()"
(Ran Xiaokai)
Some cleanup work in the THP code
- "selftests/memfd: fix compilation warnings" (Konstantin Khorenko)
Fix a few build glitches in the memfd selftest code.
- "memcg: shrink obj_stock_pcp and cache multiple objcgs" (Shakeel
Butt)
Resolve a 68% performance regression caused by NUMA-node cache
thrashing around struct obj_stock_pcp by shrinking its existing
fields and expanding it into a multi-slot array that caches up to
five obj_cgroup pointers per CPU, allowing per-node variants of the
same memcg to coexist within a single 64-byte cache line.
- "zram: writeback fixes" (Sergey Senozhatsky)
address a couple of unrelated zram writeback issues
- "mm: switch THP shrinker to list_lru" (Johannes Weiner)
Resolve NUMA-awareness issues and streamlines callsite interaction by
refactoring and extending the list_lru API to completely replace the
complex, open-coded deferred split queue for Transparent Huge Pages
- "mm: improve large folio readahead for exec memory" (Usama Arif)
Improve large-folio readahead on systems like 64K-page arm64 by
preventing the mmap_miss check from permanently disabling
target-oriented VM_EXEC readahead, and by generalizing the
force_thp_readahead gate to support mappings with any usefully large
maximum folio order under the cache cap.
- "userfaultfd/pagemap: pre-existing fixes" (Kiryl Shutsemau)
Fix a bunch of minor issues in the userfaultfd/pagemap, all of which
were flagged by Sashiko review of proposed new material
- "mm/sparse-vmemmap: Provide generic vmemmap_set_pmd() and
vmemmap_check_pmd()" (Muchun Song)
Provide generic versions of these two functions so the four
arch-specific implementations can be removed.
- "mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap
device" (Youngjun Park)
Address a uswsusp-vs-swapoff race and reduces the swap device
reference taking/releasing frequency.
- "mm/hmm: A fix and a selftest" (Dev Jain)
* tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
selftests/mm/hmm-tests: test pagemap reads of PMD device-private entries
fs/proc/task_mmu: do not warn on seeing non-migration pmd entry
lib/test_hmm: check alloc_page_vma() return value and handle OOM
mm/compaction: cap compact_gap() at COMPACT_CLUSTER_MAX
mm/swap: remove redundant swap device reference in alloc/free
mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap device
mm/filemap: use folio_next_index() for start
vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
sparc/mm: drop vmemmap_check_pmd helper and use generic code
loongarch/mm: drop vmemmap_check_pmd helper and use generic code
riscv/mm: drop vmemmap_pmd helpers and use generic code
arm64/mm: drop vmemmap_pmd helpers and use generic code
mm/sparse-vmemmap: provide generic vmemmap_set_pmd() and vmemmap_check_pmd()
rust: page: mark Page::nid as inline
userfaultfd: build __VMA_UFFD_FLAGS from config-gated masks
userfaultfd: gate must_wait writability check on pte_present()
mm/huge_memory: preserve pmd_swp_uffd_wp on device-private PMD downgrade
fs/proc/task_mmu: fix hugetlb self-deadlock in pagemap_scan_pte_hole()
fs/proc/task_mmu: use huge_page_size() in pagemap_scan_hugetlb_entry()
fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules updates from Sami Tolvanen:
- Add a missing return value check for module_extend_max_pages() to
prevent a kernel oops on memory allocation failure.
- Force sh_addr to 0 for architecture-specific module sections on arm,
arm64, m68k, and riscv. This prevents non-zero section addresses when
linking modules with ld.bfd -r, which may cause tools to misbehave
and result in worse compressibility.
- Replace pr_warn! with pr_warn_once! for set_param null pointer
warnings in Rust abstractions, now that the _once variant is
available.
* tag 'modules-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
rust: module_param: add missing newline to pr_warn_once
module: decompress: check return value of module_extend_max_pages()
rust: module_param: use `pr_warn_once!` for null pointer warning
module, riscv: force sh_addr=0 for arch-specific sections
module, m68k: force sh_addr=0 for arch-specific sections
module, arm64: force sh_addr=0 for arch-specific sections
module, arm: force sh_addr=0 for arch-specific sections
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- xe: add initial CRI platform support
- amdgpu: initial HDMI 2.1 FRL support
- rust: add some new type concepts for device lifetimes
- scheduler: moves to a fair algorithm and lots of cleanups
But it's mostly the usual mountain of changes across the board.
core:
- add docbook for DRM_IOCTL_SYNCOBJ_EVENTFD
- change signature of drm_connector_attach_hdr_output_metadata_property
- dedup counter and timestamp retrieval in vblank code
- parse AMD VSDB v3 in CTA extension blocks
- add P230, Y7, XYYY2101010, T430, XVUY210101010 formats
- don't call drop master on file close if not master
- use drm_printf_indent in atomic / bridge
- fix 32b format descriptions
- docs: fix toctree
- hdmi: add common TMDS character rates
- fix drm_syncobj_find_fence leak
rust:
- introduce Higher-Ranked lifetime types
- replace drvdata with scoped registration data
- add GPUVM immediate mode abstraction for rust GPU drivers
- introduce DeviceContext type state for drm::Device
bridge:
- clarify drm_bridge_get/put
- create drm_get_bridge_by_endpoint and use it
- analogix_dp: add panel probing
- ite-it6211 - use drm audio hdmi helpers
buddy:
- add lockdep annotations
dp:
- add PR and VRR updates
- mst: fix buffer overflows
- add Adaptive Sync SDP decoding support
- fix OOB reads in dp-mst
ttm:
- bump fpfn/lpfn to 64-bit
scheduler:
- change default to fair scheduler
- map runqueue 1:1 with scheduler
dma-buf:
- port selftests to kunit
- convert dma-buf system/heap allocators to module
- add separate DMABUF_HEAPS_SYSTEM_CC_SHARED Kconfig
udmabuf:
- revert hugetlb support
- fix error with CONFIG_DMA_API_DEBUG
dma-fence:
- fix tracepoints lifetime
- remove unused signal on any support
ras:
- add clear error counter netlink command to drm ras
gpusvm:
- reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges
- use IOVA allocations
pagemap:
- use IOVA allocations
panels:
- update to use ref counts
- add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1
- add support for waveshare panels
- CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5,
- IVO, R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F,
- AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels
- Surface Pro 12 Panel
xe:
- add CRI PCI-IDs
- debugfs add multi-lrc info
- engine init cleanup
- PF fair scheduling auto provisioning
- system controller support for CRI/Xe3p
- PXP state machine fixes
- Reset/wedge/unload corner case fixes
- Wedge path memory allocation fixes
- PAT type cleanups
- Reject unsafe PAT for CPU cached memory
- OA improvements for CRI device memory
- kernel doc syntax in xe headers
- xe_drm.h documentation fixes
- include guard cleanups
- VF CCS memory pool
- i915/xe step unification
- Xe3p GT tuning fixes
- forcewake cleanup in GT and GuC
- admin-only PF mode
- enable hwmon energy attributes for CRI
- enable GT_MI_USER_INTERRUPT
- refactor emit functions
- oa workarounds
- multi_queue: allow QUEUE_TIMESTAMP register
- convert stolen memory to ttm range manager
- use xe2 style blitter as a feature flag
- make drm_driver const
- add/use IRQ page to HW engine definition
- fix oops when display disabled
i915:
- enable PIPEDMC_ERROR interrupt
- more common display code refactoring
- restructure DP/HDMI sink format handling
- eliminate FB usage from lowlevel pinning code
- panel replay bw optimization
- integrate sharpness filter into the scaler
- new fb_pin abstraction for xe/i915 fb transparent handling
- skip inactive MST connectors on HDCP
- start switching to display specific registers
- use polling when irq unavailable
- Adaptive-sync SDP prep
amdgpu:
- use drm_display_info for AMD VSDB data
- Initial HDMI 2.1 FRL support
- Initial DCN 4.2.1 support
- GART fixes for non-4k pages
- GC 11.5.6/SDMA 6.4.0/and other new IPs
- GFX9/DCE6/Hawaii/SDMA4/GART/Userq fixes
- Finish support for using multiple SDMA queues for TTM operations
- SWSMU updates
- GC 12.1 updates
- SMU 15.0.8 updates
- DCN 4.2 updates
- DC type conversion fixes
- Enable DC power module
- Replay/PSR updates
- SMU 13.x updates
- Compute queue quantum MQD updates
- ASPM fix
- Align VKMS with common implementation
- DC analog support fixes
- UVD 3 fixes
- TCC harvesting fixes for SI
- GC 11 APU module reload fix
- NBIO 6.3.2 support
- IH 7.1 updates
- DC cursor fixes
- VCN/JPEG user fence fixes
- DC support for connectors without DDC
- Prefer ROM BAR for default VGA device
- DC bandwidth fixes
- Add PTL support for profiler
- Introduce dc_plane_cm and migrate surface update color path
- Add FRL registers for HDMI 2.1
- Restructure VM state machine
- Auxless ALPM support
- GEM_OP locking/warning fixes
- switch to system_dfl_wq
amdkfd:
- GPUVM TLB flush fix
- Hotplug fix
- Boundary check fixes
- SVM fixes
- CRIU fixes
- add profiler API
- MES 12.1 updates
msm:
- core:
- fix shrinker documentation
- IFPC enabled for gen8
- PERFCNTR_CONFIG ioctl support
- GPU:
- reworked UBWC handling
- a810 support
- MDSS:
- add support for Milos platform
- reworked UBWC handling
- DisplayPort:
- reworked HPD handling as prep for MST
- DPU:
- Milos platform support
- reworked UBWC handling
- DSI:
- Milos platform support
nova:
- Hopper/Blackwell enablement (GH100/GB100/GB202)
- FSP support
- 32-bit firmware support
- HAL functions
- refactor GSP boot/unload
- GA100 support
- VBIOS hardening/refactoring
- Adopt higher order lifetime types
tyr:
- define register blocks
- add shmem backed GEM objects
- adopt higher order lifetime types
- move clock cleanup into Drop
radeon:
- Hawaii SMU fixes
- CS parser fix
- use struct drm_edid instead of edid
amdxdna:
- export per-client BO memory via fdinfo
- AIE4 device support
- support medium/lower power modes
- expandable device heap support
- revert read-only user-pointer BO mappings
ivpu:
- support frequency limiting
panthor:
- enable GEM shrinker support
- add eviction and reclaim info to fdinfo
v3d:
- enable runtime PM
mgag200:
- support XRGB1555 + C8
ast:
- support XRGB1555 + C8
- use constants for lots of registers
- fix register handling
imagination:
- fence handling refactoring
nouveau:
- fix sched double call
- expose VBIOS on GSP-RM systems
- add GA100 support
virtio:
- add VIRTIO_GPU_F_BLOB_ALIGNMENT flag
- add deferred mapping support
gud:
- add RCade Display Adapter
hibmc:
- fix no connectors usage
mediatek:
- hdmi: convert error handling
- simplify mtk_crtc allocation
exynos:
- move fbdev emulation to drm client buffers
- use drm format helpers for geometry/size
- adopt core DMA tracking
- fix framebuffer offset handling
renesas:
- add RZ/T2H SOC support
versilicon:
- add cursor plane support
tegra:
- use drm client for framebuffer"
* tag 'drm-next-2026-06-17' of https://gitlab.freedesktop.org/drm/kernel: (1731 commits)
dma-buf: move system_cc_shared heap under separate Kconfig
accel/amdxdna: Clear sva pointer after unbind
agp/amd64: Fix broken error propagation in agp_amd64_probe()
accel/amdxdna: Require carveout when PASID and force_iova are disabled
drm/amdkfd: always resume_all after suspend_all
drm/amdgpu/gfx: move fault and EOP IRQ get/put to hw_init/hw_fini
drm/amd/display: Consult MCCS FreeSync cap only if requested & supported
drm/amd/pm: Use strscpy in profile mode parsing
drm/amdkfd: Fix infinite loop parsing CRAT with zero subtype length
drm/amdkfd: fix sysfs topology prop length on buffer truncation
drm/amdgpu: drop retry loop in amdgpu_hmm_range_get_pages
drm/amd/pm: bound OD parameter parsing to stack array size
drm/amd/pm: Stop pp_od_clk_voltage emit at PAGE_SIZE
drm/amdkfd: Unwind debug trap enable on copy_to_user failure
drm/amdgpu: validate the mes firmware version for gfx12.1
drm/amdgpu: validate the mes firmware version for gfx12
drm/amdgpu: compare MES firmware version ucode for gfx11
drm/amdkfd: Add bounds check for AMDKFD_IOC_WAIT_EVENTS
drm/amdgpu: restart the CS if some parts of the VM are still invalidated
drm/amd/display: use unsigned types for local pipe and REG_GET counters
...
|
|
A `Debug` impl is for debugging and is normally not used, and therefore
should ideally not be code-generated unless used. However, Rust has no way
of knowing if a dependent crate is going to use the trait impl or not, so
unless it is marked as `#[inline]`, it will be code-generated in the
defining crate (as it is not generic).
Mark the impl generated by bitfield macro `#[inline]`, so they do not stay
in the binary unless used.
This reduces nova-core.o .text by 17% (from 151922 bytes to 125676 bytes).
Signed-off-by: Gary Guo <gary@garyguo.net>
Fixes: b7b8b4ccdad4 ("rust: extract `bitfield!` macro from `register!`")
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260611190555.2298991-1-gary@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
In order to easily use `IntoBytes`, add it to the prelude.
This adds both the trait (`zerocopy::IntoBytes`) as well as the derive
macro (`zerocopy_derive::IntoBytes`).
[ This patch will simplify using the feature in several trees next cycle.
Gary writes:
This is wanted because I want to convert the upcoming I/O projection
series to use `zerocopy` traits rather than keep using transmute
module.
It is most helpful for derives in doc tests; I do not want to
explicitly use `#[derive(zerocopy_derive::IntoBytes)]` in the
doc tests.
For reference, the upcoming I/O projection series is at:
https://lore.kernel.org/rust-for-linux/20260611-io_projection-v4-0-1f7224b02dcb@garyguo.net/
- Miguel ]
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260611134802.2052296-1-gary@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Per-controller admin and IO timeout sysfs attributes, and
letting the block layer set request timeouts (Maurizio,
Maximilian)
- Multipath passthrough iostats, and PCI P2PDMA enablement for
multipath devices (Keith, Kiran)
- A new diag sysfs attribute group exporting per-controller
counters (retries, multipath failover, error counters, requeue
and failure counts, reset and reconnect events) (Nilay)
- FDP configuration validation and bounds check fixes (liuxixin)
- Various nvmet fixes, including a pre-auth out-of-bounds read in
the Discovery Get Log Page handler, auth payload bounds
validation, and tcp error-path leak fixes (Bryam, Tianchu,
Geliang)
- nvme-tcp lockdep and workqueue fixes (Shin'ichiro, Kuniyuki,
Eric)
- Assorted other fixes and cleanups (John, Yao, Chao, Mateusz,
Achkinazi, Wentao)
- MD pull request via Yu Kuai:
- raid1/raid10 fixes for a deadlock in the read error recovery
path, error-path detection and bio accounting with cloned bios,
and an nr_pending leak in the REQ_ATOMIC bad-block error path
(Abd-Alrhman)
- PCI P2PDMA propagation from member devices to the RAID device
(Kiran)
- dm-raid bio requeue fix, and various smaller fixes and cleanups
(Benjamin, Chen, Li, Thorsten)
- Enable Clang lock context analysis for the block layer, with the
accompanying annotations across queue limits, the blk_holder_ops
callbacks, crypto, cgroup, iocost, kyber and mq-deadline (Bart)
- Block status code infrastructure work: a tagged status table, a
str_to_blk_op() helper, a bio_endio_status() helper, and on top of
that a new configurable block-layer error injection facility
(Christoph)
- DRBD netlink rework, replacing the genl_magic machinery with explicit
netlink serialization and moving the DRBD UAPI headers to
include/uapi/linux/ (Christoph Böhmwalder)
- bvec improvements: a bvec_folio() helper and making the bvec_iter
helpers proper inline functions (Willy, Christoph)
- ublk cleanups and a canceling-flag fix for the disk-not-allocated
case (Caleb, Ming)
- Partition handling fixes: bound the AIX pp_count scan, fix an of_node
refcount leak, and replace __get_free_page() with kmalloc() (Bryam,
Wentao, Mike)
- Convert numa_node to int in blk_mq_hw_ctx and ->init_request, and add
WQ_PERCPU to the block workqueue users (Mateusz, Marco)
- Block statistics and tracing: propagate in-flight to the whole disk
on partition IO, export passthrough stats, and a new
block_rq_tag_wait tracepoint (Tang, Keith, Aaron)
- A round of removals, unexports and cleanups across bio, direct-io and
the bvec helpers (Christoph)
- Various driver fixes (mtip32xx use-after-free, rbd snap_count
validation and strscpy conversion, nbd socket lockdep reclassify,
virtio-blk zone report clamp, floppy) and a batch of MAINTAINERS
email/list updates (Coly, Li, Yu, Christoph Böhmwalder)
- Other little fixes and cleanups all over
* tag 'for-7.2/block-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (117 commits)
MAINTAINERS: Update Coly Li's email address
block: check bio split for unaligned bvec
nbd: Reclassify sockets to avoid lockdep circular dependency
block: add configurable error injection
block: add a str_to_blk_op helper
block: add a "tag" for block status codes
block: add a macro to initialize the status table
floppy: Drop unused pnp driver data
block: propagate in_flight to whole disk on partition I/O
virtio-blk: clamp zone report to the report buffer capacity
block: optimize I/O merge hot path with unlikely() hints
drivers/block/rbd: Use strscpy() to copy strings into arrays
partitions: aix: bound the pp_count scan to the ppe array
block: Enable lock context analysis
block/mq-deadline: Make the lock context annotations compatible with Clang
block/Kyber: Make the lock context annotations compatible with Clang
block/blk-mq-debugfs: Improve lock context annotations
block/blk-iocost: Inline iocg_lock() and iocg_unlock()
block/blk-iocost: Split ioc_rqos_throttle()
block/crypto: Annotate the crypto functions
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Use CIO device online variable instead of the internal FSM state to
determine device availability during purge operations
- Remove extra check of task_stack_page() because try_get_task_stack()
already takes care of that when reading /proc/<pid>/wchan
- Allow user-space to use the new SCLP action qualifier 4 for to
provide NVMe SMART log data to the platform.
- Send AP CHANGE uevents on successful bind and successful association
to notify user-space about SE operations on AP queue devices
- Add an s390dbf kernel parameter to configure debug log levels and
area sizes during early boot
- On arm64 the empty zero page is going to be mapped read-only. Do the
same for s390 with an explicit set_memory_ro() call
- Improve s390-specific bcr_serialize() and cpu_relax() implementations
- Remove all unused variables to avoid allmodconfig W=1 build fails
with latest clang-23
- Cleanup default Kconfig values for s390 selftests
- Add a s390-tod trace clock to allow comparing trace timestamps
between different systems or virtual machines on s390
- Remove the s390 implementation of strlcat() in favor of the generic
variant
- Make consistent the calling order between
page_table_check_pte_clear() and secure page conversion across all
code paths
- Rearrange some fields within AP and zcrypt structs to reduce memory
consumption and unused holes
- Shorten GR_NUM and VX_NUM macros and move them to a separate header
- Replace __get_free_page() with kmalloc() in few sources
- Introduce an infrastructure for more efficient this_cpu operations.
Eliminate conditional branches when PREEMPT_NONE is removed
- Enable Rust support
- Use z10 as minimum architecture level, similar to the boot code, to
enforce a defined architecture level set
- Improve and convert various mem*() helper functions to C. For that
add .noinstr.text section to avoid orphaned warnings from the linker
- Fix the function pointer type in __ret_from_fork() to correct the
indirect call to match kernel thread return type of int
- Revert support for DCACHE_WORD_ACCESS to avoid an endless exception
loop on read from donated Ultravisor pages at unaligned addresses
* tag 's390-7.2-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/s390/linux: (52 commits)
s390: Revert support for DCACHE_WORD_ACCESS
s390/process: Fix kernel thread function pointer type
s390/tishift: Convert __ashlti3(), __ashrti3(), __lshrti3() to C
s390/memmove: Optimize backward copy case
s390/string: Convert memset(16|32|64)() to C
s390/string: Convert memcpy() to C
s390/string: Convert memset() to C
s390/string: Convert memmove() to C
s390/string: Add -ffreestanding compile option to string.o
s390: Add .noinstr.text to boot and purgatory linker scripts
s390/purgatory: Enforce z10 minimum architecture level
s390: Enable Rust support
s390/cmpxchg: Fix KASAN stack-out-of-bounds in atomic helpers
rust: helpers: Add memchr wrapper for string operations
rust/bindgen_parameters: Mark s390 types as opaque to prevent repr conflicts
s390/jump_label: Implement ARCH_STATIC_BRANCH_JUMP_ASM and ARCH_STATIC_BRANCH_ASM macros
s390/bug: Provide ARCH_WARN_ASM for Rust WARN/BUG support
s390/ap: Fix locking issue in SE bind and associate sysfs functions
s390/percpu: Provide arch_this_cpu_write() implementation
s390/percpu: Provide arch_this_cpu_read() implementation
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Futex updates:
- Optimize futex hash bucket access patterns (Peter Zijlstra)
- Large series to address the robust futex unlock race for real, by
Thomas Gleixner:
"The robust futex unlock mechanism is racy in respect to the
clearing of the robust_list_head::list_op_pending pointer because
unlock and clearing the pointer are not atomic.
The race window is between the unlock and clearing the pending op
pointer. If the task is forced to exit in this window, exit will
access a potentially invalid pending op pointer when cleaning up
the robust list.
That happens if another task manages to unmap the object
containing the lock before the cleanup, which results in an UAF.
In the worst case this UAF can lead to memory corruption when
unrelated content has been mapped to the same address by the time
the access happens.
User space can't solve this problem without help from the kernel.
This series provides the kernel side infrastructure to help it
along:
1) Combined unlock, pointer clearing, wake-up for the
contended case
2) VDSO based unlock and pointer clearing helpers with a
fix-up function in the kernel when user space was interrupted
within the critical section.
... with help by André Almeida:
- Add a note about robust list race condition (André Almeida)
- Add self-tests for robust release operations (André Almeida)
Context analysis updates:
- Implement context analysis for 'struct rt_mutex'. (Bart Van Assche)
- Bump required Clang version to 23 (Marco Elver)
Guard infrastructure updates:
- Series to remove NULL check from unconditional guards (Dmitry
Ilvokhin)
Lockdep updates:
- Restore self-test migrate_disable() and sched_rt_mutex state on
PREEMPT_RT (Karl Mehltretter)
Membarriers updates:
- Use per-CPU mutexes for targeted commands (Aniket Gattani)
- Modernize membarrier_global_expedited with cleanup guards (Aniket
Gattani)
- Add rseq stress test for CFS throttle interactions (Aniket Gattani)
percpu-rwsems updates:
- Extract __percpu_up_read() to optimize inlining overhead (Dmitry
Ilvokhin)
Seqlocks updates:
- Allow UBSAN_ALIGNMENT to fail optimizing (Heiko Carstens)
Lock tracing:
- Add contended_release tracepoint to sleepable locks such as
mutexes, percpu-rwsems, rtmutexes, rwsems and semaphores (Dmitry
Ilvokhin)
MAINTAINERS updates:
- MAINTAINERS: Add RUST [SYNC] entry (Boqun Feng)
Misc updates and fixes by Randy Dunlap, YE WEI-HONG, Fabricio Parra,
Dmitry Ilvokhin and Peter Zijlstra"
* tag 'locking-core-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (36 commits)
locking: Add contended_release tracepoint to sleepable locks
locking/percpu-rwsem: Extract __percpu_up_read()
tracing/lock: Remove unnecessary linux/sched.h include
futex: Optimize futex hash bucket access patterns
rust: sync: completion: Mark inline complete_all and wait_for_completion
MAINTAINERS: Add RUST [SYNC] entry
cleanup: Specify nonnull argument index
selftests: futex: Add tests for robust release operations
Documentation: futex: Add a note about robust list race condition
x86/vdso: Implement __vdso_futex_robust_try_unlock()
x86/vdso: Prepare for robust futex unlock support
futex: Provide infrastructure to plug the non contended robust futex unlock race
futex: Add robust futex unlock IP range
futex: Add support for unlocking robust futexes
futex: Cleanup UAPI defines
x86: Select ARCH_MEMORY_ORDER_TSO
uaccess: Provide unsafe_atomic_store_release_user()
futex: Provide UABI defines for robust list entry modifiers
futex: Move futex related mm_struct data into a struct
futex: Make futex_mm_init() void
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Deferred probe:
- Fix race where deferred probe timeout work could be permanently
canceled by using mod_delayed_work()
- Fix missing jiffies conversion in deferred_probe_extend_timeout()
- Guard timeout extension with delayed_work_pending() to prevent
premature firing
- Use system_percpu_wq instead of the deprecated system_wq
- Update deferred_probe_timeout documentation
device:
- Replace direct struct device bitfield access (can_match, dma_iommu,
dma_skip_sync, dma_ops_bypass, state_synced, dma_coherent,
of_node_reused, offline, offline_disabled) with flag-based
accessors using bit operations
- Reject devices with unregistered buses
- Delete unused DEVICE_ATTR_PREALLOC()
- Add low-level device attribute macros with const show/store
callbacks, allowing device attributes to reside in read-only memory
- Move core device attributes to read-only memory
- Constify group array pointers in driver_add_groups() /
driver_remove_groups(), struct bus_type, and struct device_driver
device property:
- Fix fwnode reference leak in fwnode_graph_get_endpoint_by_id()
- Initialize all fields of fwnode_handle in fwnode_init()
- Provide swnode_get()/swnode_put() wrappers around kobject_get/put()
- Allow passing struct software_node_ref_args pointers directly to
PROPERTY_ENTRY_REF()
driver_override:
- Migrate amba, cdx, vmbus, and rpmsg to the generic driver_override
infrastructure, fixing a UAF from unsynchronized access to
driver_override in bus match() callbacks
- Remove the now-unused driver_set_override()
firmware loader:
- Fix recursive lock deadlock in device_cache_fw_images() when async
work falls back to synchronous execution
- Fix device reference leak in firmware_upload_register()
platform:
- Pass KBUILD_MODNAME through the platform driver registration macro
to create module symlinks in sysfs for built-in drivers; move
module_kset initialization to a pure_initcall and tegra cbb
registration to core_initcall to ensure correct ordering
- Pass THIS_MODULE implicitly through a coresight_init_driver() macro
sysfs:
- Upgrade OOB write detection in sysfs_kf_seq_show() from printk to
WARN
- Add return value clamping to sysfs_kf_read()
Rust:
- ACPI:
Fix missing match data for PRP0001 by exporting
acpi_of_match_device()
- Auxiliary:
Replace drvdata() with dedicated registration data on
auxiliary_device. drvdata() exposed the driver's bus device private
data beyond the driver's own scope, creating ordering constraints
and forcing the data to outlive all registrations that access it.
Registration data is instead scoped structurally to the
Registration object, making lifecycle ordering enforced by
construction rather than convention.
- Rust-native device driver lifetimes (HRT):
Allow Rust device drivers to carry a lifetime parameter on their
bus device private data, tied to the device binding scope -- the
interval during which a bus device is bound to a driver. Device
resources like pci::Bar<'a> and IoMem<'a> can be stored directly in
the driver's bus device private data with a lifetime bounded by the
binding scope, so the compiler enforces at build time that they do
not outlive the binding. This removes Devres indirection from every
access site and eliminates try_access() failure paths in
destructors.
Bus driver traits use a Generic Associated Type (GAT) Data<'bound>
to introduce the lifetime on the private data, rather than
parameterizing the Driver trait itself. Auxiliary registration
data, where the lifetime is not introduced by a trait callback but
must be threaded through Registration, uses the ForLt trait (a
type-level abstraction for types generic over a lifetime).
Misc:
- Fix DT overlayed devices not probing by reverting the broken
treewide overlay fix and re-running fw_devlink consumer pickup when
an overlay is applied to a bound device
- Use root_device_register() for faux bus root device; add sanity
check for failed bus init
- Fix dev_has_sync_state() data race with READ_ONCE() and move it to
base.h
- Avoid spurious device_links warning when removing a device while
its supplier is unbinding
- Switch ISA bus to dynamic root device
- Fix suspicious RCU usage in kernfs_put()
- Remove devcoredump exit callback
- Constify devfreq_event_class"
* tag 'driver-core-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core: (81 commits)
software node: allow passing reference args to PROPERTY_ENTRY_REF()
driver core: platform: set mod_name in driver registration
coresight: pass THIS_MODULE implicitly through a macro
kernel: param: initialize module_kset in a pure_initcall
soc/tegra: cbb: Move driver registration from pure_initcall to core_initcall
firmware_loader: Fix recursive lock in device_cache_fw_images()
driver core: Use system_percpu_wq instead of system_wq
driver core: remove driver_set_override()
rpmsg: use generic driver_override infrastructure
Drivers: hv: vmbus: use generic driver_override infrastructure
cdx: use generic driver_override infrastructure
amba: use generic driver_override infrastructure
rust: devres: add 'static bound to Devres<T>
samples: rust: rust_driver_auxiliary: showcase lifetime-bound registration data
rust: auxiliary: generalize Registration over ForLt
rust: types: add `ForLt` trait for higher-ranked lifetime support
gpu: nova-core: separate driver type from driver data
samples: rust: rust_driver_pci: use HRT lifetime for Bar
rust: io: make IoMem and ExclusiveIoMem lifetime-parameterized
rust: pci: make Bar lifetime-parameterized
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Over a half of the changes here are cpufreq updates that include core
modifications, fixes of the old-style governors, new hardware support
in drivers, assorded driver fixes and cleanups, and the removal of one
driver (AMD Elan SC4*).
Apart from that, the intel_idle driver will now be able to avoid
exposing redundant C-states if PC6 is disabled and there are new
sysctl knobs for device suspend/resume watchdog timeouts, hibernation
gets built-in LZ4 support for image compression and there is the usual
collection of assorted fixes and cleanups.
Specifics:
- Fix a race between cpufreq suspend and CPU hotplug during system
shutdown (Tianxiang Chen)
- Avoid redundant target() calls for unchanged limits and fix a typo
in a comment in the cpufreq core (Viresh Kumar)
- Fix concurrency issues related to sysfs attributes access that
affect cpufreq governors using the common governor code (Zhongqiu
Han)
- Simplify frequency limit handling in the conservative cpufreq
governor (Lifeng Zheng)
- Fix descriptions of the conservative governor freq_step tunable and
the ondemand governor sampling_down_factor tunable in the cpufreq
documentation (Pengjie Zhang)
- Fix use-after-free and double free during _OSC evaluation in the
PCC cpufreq driver (Yuho Choi)
- Rework the handling of policy min and max frequency values in the
cpufreq core to allow drivers to specify special initial values for
the scaling_min_freq and scaling_max_freq sysfs attributes (Pierre
Gondois)
- Add cpufreq scaling support for Qualcomm Shikra SoC (Taniya Das,
Imran Shaik).
- Improve the warning message on HWP-disabled hybrid processors
printed by the intel_pstate driver and sync policy->cur during CPU
offline in it (Yohei Kojima, Fushuai Wang)
- Drop cpufreq support for AMD Elan SC4* (Sean Young)
- Minor fixes for cpufreq drivers (Krzysztof Kozlowski, Akashdeep
Kaur, Hans Zhang, Guangshuo Li, Xueqin Luo)
- Clean up dead dependencies on X86 in the cpufreq Kconfig (Julian
Braha)
- Allow the intel_idle driver to avoid exposing C-states that are
redundant when PC6 is disabled (Artem Bityutskiy)
- Fix memory leak and a potential race in the OPP core (Abdun Nihaal,
Di Shen)
- Mark Rust OPP methods as inline (Nicolás Antinori)
- Fix misc device registration failure path in the PM QoS core (Yuho
Choi)
- Add sysctl interface for DPM watchdog timeouts (Tzung-Bi Shih)
- Use complete() instead of complete_all() in device_pm_sleep_init()
to avoid a false-positive warning from lockdep_assert_RT_in_threaded_ctx()
when CONFIG_PROVE_RAW_LOCK_NESTING is enabled (Jiakai Xu)
- Use a flexible array for CRC uncompressed buffers during
hibernation image saving (Rosen Penev)
- Make the LZ4 algorithm available for hibernation compression
(l1rox3)
- Move the preallocate_image() call during hibernation after the
"prepare" phase of the "freeze" transition (Matthew Leach)
- Fix a memory leak in rapl_add_package_cpuslocked() in the
intel_rapl power capping driver and use sysfs_emit() in
cpumask_show() in that driver (Sumeet Pawnikar, Yury Norov)
- Fix ValueError when parsing incomplete device properties in the
pm-graph utility (Gongwei Li)"
* tag 'pm-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (40 commits)
PM: dpm_watchdog: Add sysctl interface for DPM watchdog timeouts
PM: QoS: Fix misc device registration unwind
cpufreq: Use policy->min/max init as QoS request
cpufreq: Remove driver default policy->min/max init
cpufreq: Set default policy->min/max values for all drivers
cpufreq: Extract cpufreq_policy_init_qos() function
cpufreq: Documentation: fix conservative governor freq_step description
cpufreq: ti: Add EPROBE_DEFER for K3 SoCs
cpufreq: qcom: Add cpufreq scaling support for Qualcomm Shikra SoC
dt-bindings: cpufreq: Document Qualcomm Shikra SoC EPSS
powercap: intel_rapl: Use sysfs_emit() in cpumask_show()
cpufreq: governor: Fix stale prev_cpu_nice spike when enabling ignore_nice_load
cpufreq: governor: Fix data races on per-CPU idle/nice baselines
PM: hibernate: Use flexible array for CRC uncompressed buffers
powercap: intel_rapl: Fix memory leak in rapl_add_package_cpuslocked()
PM: hibernate: make LZ4 available for hibernation compression
PM: sleep: Use complete() in device_pm_sleep_init()
opp: rust: mark OPP methods as inline
cpufreq: intel_pstate: Improve warning message on HWP-disabled hybrid CPUs
cpufreq: elanfreq: Drop support for AMD Elan SC4*
...
|
|
Pull Rust updates from Miguel Ojeda:
"This one is big due to the vendoring of the `zerocopy` library, which
allows us to replace a bunch of `unsafe` code dealing with conversions
between byte sequences and other types with safe alternatives. More
details on that below (and in its merge commit).
Toolchain and infrastructure:
- Introduce support for the 'zerocopy' library [1][2]:
Fast, safe, compile error. Pick two.
Zerocopy makes zero-cost memory manipulation effortless. We write
`unsafe` so you don't have to.
It essentially provides derivable traits (e.g. 'FromBytes') and
macros (e.g. 'transmute!') for safely converting between byte
sequences and other types. Having such support allows us to remove
some 'unsafe' code.
It is among the most downloaded Rust crates and it is also used by
the Rust compiler itself.
It is licensed under "BSD-2-Clause OR Apache-2.0 OR MIT".
The crates are imported essentially as-is (only +2/-3 lines needed
to be adapted), plus SPDX identifiers. Upstream has since added the
SPDX identifiers as well as one of the tweaks at my request, thus
reducing our future diffs on updates -- I keep the details in one
of our usual live lists [3].
In total, it is about ~39k lines added, ~32k without counting
'benches/' which are just for documentation purposes.
The series includes a few Kbuild and rust-analyzer improvements and
an example patch using it in Nova, removing one 'unsafe impl'.
I checked that the codegen of an isolated example function (similar
to the Nova patch on top) is essentially identical. It also turns
out that (for that particular case) the 'zerocopy' version, even
with 'debug-assertions' enabled, has no remaining panics, unlike a
few in the current code (since the compiler can prove the remaining
'ub_checks' statically).
So their "fast, safe" does indeed check out -- at least in that
case.
- Support AutoFDO. This allows Rust code to be profiled and optimized
based on the profile. Tested with Rust Binder: ~13% slower without
AutoFDO in the binderAddInts benchmark (using an app-launch
benchmark for the profile).
- Support Software Tag-Based KASAN.
In addition, fix KASAN Kconfig by requiring Clang.
- Add Kconfig options for each existing Rust KUnit test suite, such
as 'CONFIG_RUST_BITMAP_KUNIT_TEST'.
They are placed within a new menu, 'CONFIG_RUST_KUNIT_TESTS', in
the new 'rust/kernel/Kconfig.test' file.
- Support the upcoming Rust 1.98.0 release (expected 2026-08-20):
lint cleanups and an unstable flag rename.
- Disable 'rustdoc' documentation inlining for all prelude items,
which bloats the generated documentation.
- Ignore (in Git) and clean (in Kbuild) the (rarely) 'rustc'-generated
'*.long-type-*.txt' files.
'kernel' crate:
- Add new 'bitfield' module with the 'bitfield!' macro (extracted
from the existing 'register!' one), which declares integer types
that are split into distinct bit fields of arbitrary length.
Each field is a 'Bounded' of the appropriate bit width (ensuring
values are properly validated and avoiding implicit data loss) and
gets several generated getters and setters (infallible, 'const' and
fallible) as well as associated constants ('_MASK', '_SHIFT' and
'_RANGE'). It also supports fields that can be converted from/to
custom types, either fallibly ('?=>') or infallibly ('=>').
For instance:
bitfield! {
struct Rgb(u16) {
15:11 blue;
10:5 green;
4:0 red;
}
}
// Compile-time checks.
let color = Rgb::zeroed().with_const_green::<0x1f>();
assert_eq!(color.green(), 0x1f);
assert_eq!(color.into_raw(), 0x1f << Rgb::GREEN_SHIFT);
Add as well documentation and a test suite for it, as usual; and
update the 'register!' macro to use it.
It will be maintained by Alexandre Courbot (with Yury Norov as
reviewer) under a new 'MAINTAINERS' entry: 'RUST [BITFIELD]'.
- 'ptr' module: rework index projection syntax into keyworded syntax
and introduce panicking variant.
The keyword syntax ('build:', 'try:', 'panic:') is more explicit
and paves the way of perhaps adding more flavors in the future,
e.g. an 'unsafe' index projection.
For instance, projections now look like this:
fn f(p: *const [u8; 32]) -> Result {
// Ok, within bounds, checked at build time.
project!(p, [build: 1]);
// Build error.
project!(p, [build: 128]);
// `OutOfBound` runtime error (convertible to `ERANGE`).
project!(p, [try: 128]);
// Runtime panic.
project!(p, [panic: 128]);
Ok(())
}
Update as well the users, which now look like e.g.
// Pointer to the first entry of the GSP message queue.
let data = project!(self.0.as_ptr(), .gspq.msgq.data[build: 0]);
- 'build_assert' module: make the module the home of its macros
instead of rendering them twice.
- 'sync' module: add 'UniqueArc::as_ptr()' associated function.
- 'alloc' module:
- Fix the 'Vec::reserve()' doctest to properly account for the
existing vector length in the capacity assertion.
- Fix an incorrect operator in the 'Vec::extend_with()' 'SAFETY'
comment; add a doc test demonstrating basic usage and the
zero-length case.
- Clean imports across several modules to follow the "kernel
vertical" import style in order to minimize conflicts.
'pin-init' crate:
- User visible changes:
- Do not generate 'non_snake_case' warnings for identifiers that
are syntactically just users of a field name. This would allow
all '#[allow(non_snake_case)]' in nova-core to be removed,
which Gary will send to the nova tree next cycle.
- Filter non-cfg attributes out properly in derived structs. This
improves pin-init compatibility with other derive macros.
- Insert projection types' where clause properly.
- Other changes:
- Bump MSRV to 1.82, plus associated cleanups.
- Overhaul how init slots are projected. The new approach is
easier to justify with safety comments.
- Mark more functions as inline, which should help mitigate the
super-long symbol name issue due to lack of inlining.
rust-analyzer:
- Support '--envs' for passing env vars for crates like 'zerocopy'.
'MAINTAINERS':
- Add the following reviewers to the 'RUST' entry:
- Daniel Almeida
- Tamir Duberstein
- Alexandre Courbot
- Onur Özkan
They have been involved in the Rust for Linux project for about 7
collective years and bring expertise across several domains, which
will be very useful to have around in the future.
Thanks everyone for stepping up!
And some other fixes, cleanups and improvements"
Link: https://github.com/google/zerocopy [1]
Link: https://docs.rs/zerocopy [2]
Link: https://github.com/Rust-for-Linux/linux/issues/1239 [3]
* tag 'rust-7.2' of gitolite.kernel.org:pub/scm/linux/kernel/git/ojeda/linux: (86 commits)
MAINTAINERS: add Onur Özkan as Rust reviewer
MAINTAINERS: add Alexandre Courbot as Rust reviewer
MAINTAINERS: add Tamir Duberstein as Rust reviewer
MAINTAINERS: add Daniel Almeida as Rust reviewer
kbuild: rust: clean `zerocopy-derive` in `mrproper`
rust: make `build_assert` module the home of related macros
rust: str: clean unused import for Rust >= 1.98
rust: str: use the "kernel vertical" imports style
rust: aref: use the "kernel vertical" imports style
rust: page: use the "kernel vertical" imports style
gpu: nova-core: firmware: parse `FalconUCodeDescV2` via `zerocopy`
rust: prelude: add `zerocopy{,_derive}::FromBytes`
rust: zerocopy-derive: enable support in kbuild
rust: zerocopy-derive: add `README.md`
rust: zerocopy-derive: avoid generating non-ASCII identifiers
rust: zerocopy-derive: add SPDX License Identifiers
rust: zerocopy-derive: import crate
rust: zerocopy: enable support in kbuild
rust: zerocopy: add `README.md`
rust: zerocopy: remove float `Display` support
...
|
|
Enable building Rust code on s390 by wiring the architecture into the
kernel Rust infrastructure.
Add s390 to the Rust arch support documentation, provide the s390 Rust
target and required compiler flags, and set the bindgen target for
arch/s390. Adjust the Rust target generation and minimum rustc version
gating so the s390 setup is handled explicitly.
The Rust toolchain uses the "s390x" triple naming for the 64 bit target.
Rust support is currently incompatible with CONFIG_EXPOLINE, which
relies on compiler support for the -mindirect-branch= and
-mfunction_return= options. Therefore, select HAVE_RUST only when
EXPOLINE is disabled.
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Gary Guo <gary@garyguo.net>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Add a dedicated string helper file with a memchr wrapper that uses the
kernel's instrumented memchr() function to ensure KASAN and FORTIFY_SOURCE
protections are preserved for Rust code.
Reported-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: https://lore.kernel.org/rust-for-linux/CANiq72mXAZc0sNM7ShX8VDVs_7zJddawP-e=wt+ERr1YUCcWUw@mail.gmail.com/
Signed-off-by: Jan Polensky <japo@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Bindgen attempts to generate Rust layouts for a number of s390 structs
that are packed but contain, or transitively contain, aligned fields.
Rust rejects such layouts with E0588 ("packed type cannot transitively
contain a #[repr(align)] type").
Add the affected s390 types to the opaque type list so bindgen emits
opaque blob types instead of full representations. This matches existing
workarounds for x86 types such as alt_instr and x86_msi_data.
Link: https://lore.kernel.org/all/e5c7aa10-590d-0d20-dd3b-385bee2377e7@intel.com/
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Given the macro scoping rules, all macros are rendered twice, in the
module and in the top-level of kernel crate.
Add `#[doc(hidden)]` to the macro definition and `#[doc(inline)]` to the
re-export inside `build_assert` module so the top-level items are hidden.
[ Sadly, because the definition is hidden, `rustdoc` decides to not list
them as re-exports in the `prelude` page anymore, even if we refer to
the not-actually-hidden item.
- Miguel ]
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Acked-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260609142637.373347-1-gary@kernel.org
[ Kept a single declaration in the prelude, and reworded since they
already had `no_inline`. Removed other imports from `predefine` since
we now use the prelude. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Starting with Rust 1.98.0 (expected 2026-08-20), the compiler has changed
how the resolution algorithm works [1] in upstream commit c4d84db5f184
("Resolver: Batched import resolution."), and it now spots:
error: unused import: `flags::*`
--> rust/kernel/str.rs:7:9
|
7 | flags::*,
| ^^^^^^^^
|
= note: `-D unused-imports` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(unused_imports)]`
It happens to not be needed because the `prelude::*` already provides
the flags.
Thus clean it up.
Cc: stable@vger.kernel.org # Needed in 6.18.y and later (prelude added to `str`).
Link: https://github.com/rust-lang/rust/pull/145108 [1]
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260609104152.261145-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Convert the imports to use the "kernel vertical" imports style [1].
No functional changes intended.
Link: https://docs.kernel.org/rust/coding-guidelines.html#imports [1]
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260609104152.261145-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Convert the imports to use the "kernel vertical" imports style [1].
No functional changes intended.
Link: https://docs.kernel.org/rust/coding-guidelines.html#imports [1]
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://patch.msgid.link/20260604-unique-ref-v17-8-7b4c3d2930b9@kernel.org
[ Picked from larger series and reworded. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Convert the imports to use the "kernel vertical" imports style [1].
No functional changes intended.
Link: https://docs.kernel.org/rust/coding-guidelines.html#imports [1]
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://patch.msgid.link/20260604-unique-ref-v17-4-7b4c3d2930b9@kernel.org
[ Picked from larger series and reworded. Adjusted the `error::`
block too. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
When building the kernel using the llvm-22.1.0-rust-1.93.1-x86_64
toolchain provided by kernel.org with ARCH=x86_64, the following symbols
are generated:
$ nm vmlinux | grep ' _R'.*Completion | rustfilt
ffffffff81827930 T <kernel::sync::completion::Completion>::complete_all
ffffffff81827950 T <kernel::sync::completion::Completion>::wait_for_completion
These Rust methods are thin wrappers around the C completion helpers
`complete_all` and `wait_for_completion`. Mark them `#[inline]` to keep
the wrapper pattern consistent with other small Rust helper methods.
After applying this patch, the above command will produce no output.
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Fabricio Parra <a@alice0.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://github.com/Rust-for-Linux/linux/issues/1145
Link: https://patch.msgid.link/20260316151056.287-1-a@alice0.com
Link: https://patch.msgid.link/20260605052331.1628-4-boqun@kernel.org
|
|
In order to easily use `FromBytes`, add it to the prelude.
This adds both the trait (`zerocopy::FromBytes`) as well as the derive
macro (`zerocopy_derive::FromBytes`).
We will be adding more as we need them.
Link: https://patch.msgid.link/20260608141439.182634-19-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
With all the new files in place and ready from the new crate, enable
the support for it in the build system.
In addition, skip formatting for this vendored crate.
Link: https://patch.msgid.link/20260608141439.182634-18-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Originally, when the Rust upstream `alloc` standard library crate was
vendored in commit 057b8d257107 ("rust: adapt `alloc` crate to the
kernel"), a `README.md` file was added to explain the provenance and
licensing of the source files.
Thus do the same for the `zerocopy-derive` crate.
Cc: Joshua Liebow-Feeser <joshlf@google.com>
Cc: Jack Wrenn <jswrenn@google.com>
Link: https://patch.msgid.link/20260608141439.182634-17-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Linux is built with `-Dnon_ascii_idents`. However, `zerocopy-derive`
uses a non-ASCII character (`ẕ`) internally, which in turn triggers
the lint when attempting to use derives like `FromBytes`:
error: identifier contains non-ASCII characters
--> rust/kernel/lib.rs:153:9
|
153 | a: u32,
| ^
|
= note: requested on the command line with `-D non-ascii-idents`
This was already noticed by another project using
`#![deny(non_ascii_idents)]` [1]. `zerocopy` added an
`#[allow(non_ascii_idents)]` [2], but it does not work since, at the
moment, the `non_ascii_idents` lint is a `crate_level_only` one, and thus
`allow`s only work at the crate root level.
Due to this, an issue about relaxing this restriction was created in
upstream Rust [3] some months ago.
Thus work around it here by using another prefix. The likelihood of a
collision is very small for us, since we control the callers, and this
will hopefully be fixed soon at either the `zerocopy` or the Rust level.
I filed an issue [4] about it with upstream `zerocopy` as requested
and we discussed this with upstream Rust and `zerocopy`: the Rust issue
got nominated and a PR [5] to relax the restriction was submitted by
Joshua. Upstream `zerocopy` prefers that approach, so if Rust merges it,
then it means we will be able to remove the workaround when we bump the
MSRV, thus likely late 2027, since we follow Debian Stable.
Cc: Joshua Liebow-Feeser <joshlf@google.com>
Cc: Jack Wrenn <jswrenn@google.com>
Link: https://github.com/google/zerocopy/issues/2880 [1]
Link: https://github.com/google/zerocopy/pull/2882 [2]
Link: https://github.com/rust-lang/rust/issues/151025 [3]
Link: https://github.com/google/zerocopy/issues/3427 [4]
Link: https://github.com/rust-lang/rust/pull/157497 [5]
Link: https://patch.msgid.link/20260608141439.182634-16-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Originally, when the Rust upstream `alloc` standard library crate was
vendored, the SPDX License Identifiers were added to every file so that
the license on those was clear. The same happened with the vendoring of
`proc_macro2`, `quote` and `syn`. Please see:
commit 057b8d257107 ("rust: adapt `alloc` crate to the kernel")
commit 69942c0a8965 ("rust: syn: add SPDX License Identifiers")
commit ddfa1b279d08 ("rust: quote: add SPDX License Identifiers")
commit a9acfceb9614 ("rust: proc-macro2: add SPDX License Identifiers")
Thus do the same for the `zerocopy-derive` crate.
This makes `scripts/spdxcheck.py` pass: use parentheses like commit
06e9bfc1e57d ("ionic: make spdxcheck.py happy") did since we have two
`OR` operators in the expression (three licenses).
Finally, as requested, I filed an issue [1] with upstream about it.
Cc: Joshua Liebow-Feeser <joshlf@google.com>
Cc: Jack Wrenn <jswrenn@google.com>
Link: https://github.com/google/zerocopy/issues/3428 [1]
Link: https://patch.msgid.link/20260608141439.182634-15-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This is a subset of the Rust `zerocopy-derive` crate, version v0.8.50
(released 2026-05-31), licensed under "BSD-2-Clause OR Apache-2.0 OR
MIT", from:
https://github.com/google/zerocopy/tree/v0.8.50/zerocopy-derive/src
The files are copied as-is, with no modifications whatsoever (not even
adding the SPDX identifiers).
For copyright details, please see:
https://github.com/google/zerocopy/blob/v0.8.50/README.md?plain=1
https://github.com/google/zerocopy/blob/v0.8.50/LICENSE-BSD
https://github.com/google/zerocopy/blob/v0.8.50/LICENSE-APACHE
https://github.com/google/zerocopy/blob/v0.8.50/LICENSE-MIT
The next two patches modify these files as needed for use within the
kernel. This patch split allows reviewers to double-check the import
and to clearly see the differences introduced.
The following script may be used to verify the contents:
for path in $(cd rust/zerocopy-derive/ && find . -type f); do
curl --silent --show-error --location \
https://github.com/google/zerocopy/raw/v0.8.50/zerocopy-derive/src/$path \
| diff --unified rust/zerocopy-derive/$path - && echo $path: OK
done
Cc: Joshua Liebow-Feeser <joshlf@google.com>
Cc: Jack Wrenn <jswrenn@google.com>
Link: https://patch.msgid.link/20260608141439.182634-14-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
With all the new files in place and ready from the new crate, enable
the support for it in the build system.
In addition, skip formatting for this vendored crate.
Finally, there are no generated symbols expected from `zerocopy`, thus
skip adding the `exports` generation.
Link: https://patch.msgid.link/20260608141439.182634-13-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Originally, when the Rust upstream `alloc` standard library crate was
vendored in commit 057b8d257107 ("rust: adapt `alloc` crate to the
kernel"), a `README.md` file was added to explain the provenance and
licensing of the source files.
Thus do the same for the `zerocopy` crate.
Cc: Joshua Liebow-Feeser <joshlf@google.com>
Cc: Jack Wrenn <jswrenn@google.com>
Link: https://patch.msgid.link/20260608141439.182634-12-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The kernel builds `core` with the `no_fp_fmt_parse` `--cfg`, which means
we do not have support for formatting floating point primitives. However,
`zerocopy` expects those implementations to exist:
error[E0277]: `f32` doesn't implement `core::fmt::Display`
--> rust/zerocopy/src/byteorder.rs:172:29
|
172 | $trait::fmt(&self.get(), f)
| ----------- ^^^^^^^^^^^ the trait `core::fmt::Display` is not implemented for `f32`
| |
| required by a bound introduced by this call
...
907 | / define_type!(
908 | | An,
909 | | "A 32-bit floating point number",
910 | | F32,
... |
922 | | []
923 | | );
| |_- in this macro invocation
|
= help: the following other types implement trait `core::fmt::Display`:
i128
i16
i32
i64
i8
isize
u128
u16
and 4 others
= note: this error originates in the macro `impl_fmt_trait` which comes from the expansion of the macro `define_type` (in Nightly builds, run with -Z macro-backtrace for more info)
Thus work around it by skipping those implementations in `zerocopy`.
Ideally, `zerocopy` would have the equivalent of `no_fp_fmt_parse`;
and, indeed, upstream just added it [1] after I filed an issue [2]
about it as requested. We can try it in a future update of our
vendored copy.
Cc: Joshua Liebow-Feeser <joshlf@google.com>
Cc: Jack Wrenn <jswrenn@google.com>
Link: https://github.com/google/zerocopy/pull/3429 [1]
Link: https://github.com/google/zerocopy/issues/3426 [2]
Link: https://patch.msgid.link/20260608141439.182634-11-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Originally, when the Rust upstream `alloc` standard library crate was
vendored, the SPDX License Identifiers were added to every file so that
the license on those was clear. The same happened with the vendoring of
`proc_macro2`, `quote` and `syn`. Please see:
commit 057b8d257107 ("rust: adapt `alloc` crate to the kernel")
commit 69942c0a8965 ("rust: syn: add SPDX License Identifiers")
commit ddfa1b279d08 ("rust: quote: add SPDX License Identifiers")
commit a9acfceb9614 ("rust: proc-macro2: add SPDX License Identifiers")
Thus do the same for the `zerocopy` crate.
This makes `scripts/spdxcheck.py` pass: use parentheses like commit
06e9bfc1e57d ("ionic: make spdxcheck.py happy") did since we have two
`OR` operators in the expression (three licenses).
SPDX identifiers are not added to the `benches` files because they are
included in rendered documentation. Nevertheless, the `README.md` to be
added by a later commit mentions the license.
Finally, as requested, I filed an issue [1] with upstream about it.
Cc: Joshua Liebow-Feeser <joshlf@google.com>
Cc: Jack Wrenn <jswrenn@google.com>
Link: https://github.com/google/zerocopy/issues/3428 [1]
Link: https://patch.msgid.link/20260608141439.182634-10-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This is a subset of the Rust `zerocopy` crate, version v0.8.50 (released
2026-05-31), licensed under "BSD-2-Clause OR Apache-2.0 OR MIT", from:
https://github.com/google/zerocopy/tree/v0.8.50
The files are copied as-is, with no modifications whatsoever (not even
adding the SPDX identifiers).
The `benches` folder is added (i.e. not just `src` like in other cases)
since the files there are included in the rendered documentation,
as well as the `rustdoc` CSS style file that is needed to make those
visually more understandable.
For copyright details, please see:
https://github.com/google/zerocopy/blob/v0.8.50/README.md?plain=1
https://github.com/google/zerocopy/blob/v0.8.50/LICENSE-BSD
https://github.com/google/zerocopy/blob/v0.8.50/LICENSE-APACHE
https://github.com/google/zerocopy/blob/v0.8.50/LICENSE-MIT
The next two patches modify these files as needed for use within the
kernel. This patch split allows reviewers to double-check the import
and to clearly see the differences introduced.
The following script may be used to verify the contents:
for path in $(cd rust/zerocopy/ && find . -type f); do
curl --silent --show-error --location \
https://github.com/google/zerocopy/raw/v0.8.50/$path \
| diff --unified rust/zerocopy/$path - && echo $path: OK
done
Cc: Joshua Liebow-Feeser <joshlf@google.com>
Cc: Jack Wrenn <jswrenn@google.com>
Link: https://patch.msgid.link/20260608141439.182634-9-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Certain vendored crates, like the upcoming `zerocopy-derive`, do not
need to be built with Clippy since we `--cap-lints=allow` them anyway.
Thus add support to skip Clippy for proc macro crates.
Acked-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260608141439.182634-8-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Certain vendored crates, like the upcoming `zerocopy`, use extra
environment variables (e.g. via `env!`).
Thus add support to easily specify those.
Acked-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260608141439.182634-7-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Since we are adding one more proc macro crate (`zerocopy-derive`),
we are refactoring their handling.
Thus, instead of using `libmacros_extension` as the common variable to
hold the extension for all of them, use a dedicated variable with a more
generic name (including for its implementation).
Link: https://patch.msgid.link/20260608141439.182634-6-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Since we are adding one more proc macro crate (`zerocopy-derive`),
we are refactoring their handling.
Thus define a `procmacro-name` function and use it to fill the existing
variables' values.
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260608141439.182634-5-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Since we are adding one more proc macro crate (`zerocopy-derive`),
we are refactoring their handling.
`libpin_init_internal_extension` was added to mimic the setup for
`macros`, but it is not used, since the extension is expected to be
the same.
Thus remove it.
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260608141439.182634-4-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
When Clippy is skipped, `RUSTC` should be shown in `quiet` instead of
`CLIPPY` to be accurate and to avoid confusion.
Thus do so, matching what we do in `quiet_cmd_rustc_library`.
Fixes: 7dbe46c0b11d ("rust: kbuild: add proc macro library support")
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260608141439.182634-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add an associated function to `UniqueArc` for getting a raw pointer. The
implementation defers to the `Arc` implementation.
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260605-unique-arc-as-ptr-v2-1-425476d2abdb@kernel.org
[ Relaxed bound moving it to new `T: ?Sized` impl block. Reworded since
it is not a method anymore. Added intra-doc link. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
These methods should be inlined for optimization reasons. Failure to do
so can also produce symbol names larger than what `modpost` or `objtool`
can handle.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260605-nova-exports-v4-1-e948c287407c@nvidia.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Replace the local bitfield rules by the equivalent invocation of the
`bitfield!` macro.
No functional change should be introduced as the `bitfield!` macro has
been extracted from the rules of `register!`.
Acked-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Yury Norov <ynorov@nvidia.com>
Link: https://patch.msgid.link/20260606-bitfield-v5-3-b92188820914@nvidia.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add KUnit tests to make sure the macro is working correctly. The unit
tests are put behind the new `RUST_BITFIELD_KUNIT_TEST` Kconfig option.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
[acourbot:
- Use a consistent test axis where each test focuses on a single thing.
- Rename members to generic name including range for readability.
- Add test exercising `try_with`.
- Add test checking that unallocated bits are left untouched.
]
Co-developed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Yury Norov <ynorov@nvidia.com>
Link: https://patch.msgid.link/20260606-bitfield-v5-2-b92188820914@nvidia.com
[ Prefixed test suite name with `rust_` as mentioned. Markdown-formatted
a few comments with Markdown. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Extract the bitfield-defining part of the `register!` macro into an
independent macro used to define bitfield types with bounds-checked
accessors.
Each field is represented as a `Bounded` of the appropriate bit width,
ensuring field values are never silently truncated.
Fields can optionally be converted to/from custom types, either fallibly
or infallibly.
Appropriate documentation is also added, and a MAINTAINERS entry created
for the new module.
Two minor fixups are also applied: the private accessors are inlined,
and a couple of missing fully qualified types in the macro are fixed.
Acked-by: Yury Norov <ynorov@nvidia.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Yury Norov <ynorov@nvidia.com>
Link: https://patch.msgid.link/20260606-bitfield-v5-1-b92188820914@nvidia.com
[ Added some more intra-doc links. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
When building the kernel, the following Rust symbol is generated:
$ nm vmlinux | grep ' _R'.*Page | rustfilt
<kernel::page::Page>::nid
`Page::nid` is a trivial wrapper around the C function `page_to_nid`. It
does not make sense to go through a trivial wrapper for this function, so
mark it inline.
This follows commit 878620c5a93a ("rust: page: optimize rust symbol
generation for Page"), which did the same for `alloc_page` and `drop`.
Link: https://github.com/Rust-for-Linux/linux/issues/1145
Link: https://lore.kernel.org/20260529085316.27432-1-nakamura.shuta@gmail.com
Signed-off-by: Nakamura Shuta <nakamura.shuta@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Trevor Gross <tmgross@umich.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pass KBUILD_MODNAME through the driver registration macro so that the
driver core can create the module symlink in sysfs for built-in drivers,
and fixup all callers.
The Rust platform adapter is updated to pass the module name through to
the new parameter.
Tested on qemu with:
- x86 defconfig + CONFIG_RUST
- arm64 defconfig + CONFIG_RUST + CONFIG_CORESIGHT stuff
Examples after this patch:
/sys/bus/platform/drivers/...
coresight-itnoc/module -> coresight_tnoc
coresight-static-tpdm/module -> coresight_tpdm
coresight-catu-platform/module -> coresight_catu
serial8250/module -> 8250
acpi-ged/module -> acpi
vmclock/module -> ptp_vmclock
Co-developed-by: Rahul Bukte <rahul.bukte@sony.com>
Signed-off-by: Rahul Bukte <rahul.bukte@sony.com>
Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Link: https://patch.msgid.link/20260518-acpi_mod_name-v5-4-705ccc430885@sony.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull OPP updates for 7.2 from Viresh Kumar:
"- Fix memory leak and a potential race in the OPP core (Abdun Nihaal,
and Di Shen).
- Mark Rust OPP methods as inline (Nicolás Antinori)"
* tag 'opp-updates-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: rust: mark OPP methods as inline
OPP: of: Fix potential memory leak in opp_parse_supplies()
OPP: Fix race between OPP addition and lookup
|
|
i2c/for-current
rust: i2c: fix I2cAdapter refcount double increment
|
