| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit d5dc1e69fd7258ea605c9952e5d5947539159ae3 upstream.
A virtio_net_hdr (tun/tap, or AF_PACKET with PACKET_VNET_HDR) can mark
an IPv4 or IPv6 fragment as GSO; nothing relates gso_type to frag_off.
inet_frag_reasm_prepare()/inet_frag_reasm_finish() keep the first
fragment's skb as the head of the reassembled datagram, including its
shinfo->gso_size/gso_type/gso_segs, and chain the remaining fragments
on frag_list with whatever linear/paged layout they arrived with.
After ip_defrag() (ip_local_deliver(), nf_defrag_ipv4, ...) the
reassembled skb therefore still claims to be GSO (SKB_GSO_DODGY), and
the next software segmentation point - udp_rcv_segment() on local
delivery, validate_xmit_skb(), or the ip_finish_output_gso() slow
path - hands it to skb_segment(). skb_segment()'s frag_list walk
assumes GRO-shaped input and hits one of its BUG_ON()s. Two writes to
a tap by an unprivileged user in its own userns are enough:
kernel BUG at net/core/skbuff.c:4899!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 1000 PID: 82 Comm: poc Not tainted 7.2.0-pentest+ #2
RIP: 0010:skb_segment+0x20ca/0x48b0
Call Trace:
<TASK>
__udp_gso_segment+0x29a/0x27d0
udp4_ufo_fragment+0x458/0x6c0
inet_gso_segment+0x429/0x1340
skb_mac_gso_segment+0x233/0x4f0
__skb_gso_segment+0x308/0x660
udp_queue_rcv_skb+0x440/0xad0
udp_unicast_rcv_skb+0xc7/0x2c0
udp_rcv+0x16ce/0x2260
ip_protocol_deliver_rcu+0x197/0x2d0
ip_local_deliver+0x430/0x690
ip_rcv+0x16f/0x1f0
__netif_receive_skb_one_core+0x15e/0x1c0
__netif_receive_skb+0x1e/0x110
netif_receive_skb+0xf6/0x5c0
tun_rx_batched.isra.0+0x3ab/0x790
tun_get_user+0x17c3/0x3550
tun_chr_write_iter+0xba/0x1b0
vfs_write+0x646/0x1130
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
This runs with BH disabled, so it is a panic rather than an oops. The
same is reachable with CAP_NET_RAW in a netns where a defrag point
precedes a GSO point, and from a guest whose VMM forwards
virtio_net_hdr to a tap. The SKB_GSO_DODGY frag_list checks added by
commit 3dcbdb134f32 ("net: gso: Fix skb_segment splat when splitting
gso_size mangled skb having linear-headed frag_list") and by
commit 9e4b7a99a03a ("net: gso: fix panic on frag_list with mixed head
alloc types") do not cover it: page-backed heads skip them, and kmalloc
heads skip them when gso_size == skb_headlen(head), which the sender
controls.
An skb entering a frag queue is an IP fragment by definition and
cannot legitimately carry GSO state: GRO does not merge fragments and
the stack segments before it fragments, so only untrusted sources are
affected. This has been reachable since
commit f43798c27684 ("tun: Allow GSO using virtio_net_hdr"), the first
path that let userspace attach GSO metadata to an IP fragment. Reset
the GSO fields of every fragment as it is queued, in
inet_frag_queue_insert(), which IPv4, IPv6, nf_conntrack_reasm and
6lowpan reassembly share; then neither the head nor the frag_list
members of the reassembled skb carry them (the members matter too:
the ip_do_fragment()/ip6_fragment() fast paths send them out as they
are). The head may remain CHECKSUM_PARTIAL; that is already accepted
on receive and resolved by skb_checksum_help() in
ip_do_fragment()/ip6_fragment() on forward.
Tested on top of net.git (dc4b95b8fee9), x86_64: the tap reproducer
above, two further IPv4 frag_list geometries that reach
BUG_ON(i >= nfrags) and BUG_ON(!list_skb->head_frag), and an IPv6
fragment-header variant (udp6_ufo_fragment()) each panic the unpatched
kernel; with this patch all four datagrams are delivered intact and
nothing is logged.
Fixes: f43798c27684 ("tun: Allow GSO using virtio_net_hdr")
Cc: stable@kernel.org
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Xinyang Ge <xinyang@anthropic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/937926e509f2acd8e0e66520dc2b30fd6b4d1687.1787839506.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When GRO attempts to aggregate packets beyond GRO_LEGACY_MAX_SIZE (64KB),
BIG TCP should only be permitted for plain IPv4 TCP and plain IPv6 TCP
(with sufficient MAC header room to insert the temporary HBH jumbo header).
However, commit b1a78b9b9886 ("net: add support for ipv4 big tcp")
loosened the check in skb_gro_receive(), leading to several issues:
1. skb_gro_receive() checked skb_headroom(p) instead of the actual space
before the MAC header (p->mac_header). Because skb_headroom(p) includes
mac_len, crafted frames (e.g. injected via AF_PACKET) can pass the check
with p->mac_header < 8 bytes. When ipv6_gro_complete() inserts the
temporary HBH jumbo header, the memmove() starts before skb->head,
causing an out-of-bounds write and wrapping skb->mac_header.
2. It allowed non-IP protocols such as software VLAN (ETH_P_8021Q /
ETH_P_8021AD) to aggregate beyond 64KB because
p->protocol != ETH_P_IPV6 was true.
3. It checked p->encapsulation instead of NAPI_GRO_CB(skb)->encap_mark,
allowing encapsulated flows (e.g. SIT / IPv6-in-IPv4) to aggregate
beyond 64KB.
Fix skb_gro_receive() to strictly enforce:
- NAPI_GRO_CB(skb)->proto == IPPROTO_TCP
- Not encapsulated (!NAPI_GRO_CB(skb)->encap_mark && !p->encapsulation)
- Protocol must be either ETH_P_IP or ETH_P_IPV6
- If ETH_P_IPV6, p->mac_header must be at least
sizeof(struct hop_jumbo_hdr)
Returning -E2BIG from skb_gro_receive() ensures that packets which cannot
become BIG TCP are cleanly flushed at <= 64KB and delivered intact without
dropping.
This issue does not exist in mainline (7.0+) because the subsystem was
rewritten in commit 81be30c1f5f2 ("net/ipv6: Drop HBH for BIG TCP on RX
side"), making this fix relevant only for older stable branches like
6.18.y.
Fixes: 0fe79f28bfaf ("net: allow gro_max_size to exceed 65536")
Fixes: b1a78b9b9886 ("net: add support for ipv4 big tcp")
Reported-by: Sam Dlinn <sledge@meta.com>
Cc: stable@vger.kernel.org
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0acd4eeb4b225b9bebbf9ef96cc10cdd79b94899 upstream.
The Command Complete dispatch validates only the fixed part of the LE Set
CIG Parameters response. After that part is pulled from the skb,
hci_cc_le_set_cig_params() trusts num_handles and reads each entry in the
trailing handle array.
Matching num_handles against the command's num_cis does not guarantee
that the response contains the advertised handles. A truncated response
from a malfunctioning controller can therefore make the handler read
beyond the skb data.
Validate that the remaining skb data contains all advertised handles.
Include this in the existing response validation so malformed responses
also follow the established CIG failure handling.
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Cc: stable@vger.kernel.org
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 33af47e847fe4a28b109673affb5874015d54f5a upstream.
hci_cc_reset() clears the LE accept and resolving lists without taking
hdev->lock. Other command-complete handlers serialize updates to these
lists with that lock, and the debugfs readers hold it while walking them.
This permits the reset completion and a debugfs read to interleave as
follows:
hci_rx_work debugfs reader
----------- --------------
lock hdev->lock
fetch current entry
list_del(entry)
kfree(entry)
read entry fields
The reader then dereferences a freed list entry and may follow its stale
next pointer.
KASAN reported:
BUG: KASAN: slab-use-after-free in white_list_show+0x15f/0x180
Read of size 1 at addr ffff8881015dab16 by task poc/95
Call Trace:
white_list_show+0x15f/0x180
seq_read_iter+0x3ff/0x1190
seq_read+0x267/0x3d0
vfs_read+0x177/0xa20
ksys_read+0xf7/0x1c0
Allocated by task 91:
hci_bdaddr_list_add+0x1a6/0x3a0
hci_cc_le_add_to_accept_list+0xab/0x140
hci_cmd_complete_evt+0x26c/0x9a0
hci_event_packet+0x454/0xb20
hci_rx_work+0x293/0x730
Freed by task 90:
kfree+0x131/0x3c0
hci_bdaddr_list_clear+0xd8/0x160
hci_cc_reset+0x28a/0x370
hci_cmd_complete_evt+0x26c/0x9a0
hci_event_packet+0x454/0xb20
hci_rx_work+0x293/0x730
Take hdev->lock around both list clears. This matches the existing
mutation and traversal locking convention.
Fixes: a4d5504d5c39 ("Bluetooth: Clear LE white list when resetting controller")
Fixes: cfdb0c2d095a ("Bluetooth: Store Resolv list size")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit efc33b5102ff859bacd390a5f30112d8e0c084c0 ]
mptcp_pm_destroy() empties msk->pm.anno_list and
msk->pm.userspace_pm_local_addr_list under msk->pm.lock during socket
teardown, dropping the lock between the two.
A concurrent userspace PM genl ANNOUNCE on the same msk holds a sock
reference via mptcp_token_get_sock() and, in
mptcp_pm_nl_announce_doit(), calls
mptcp_userspace_pm_append_new_local_addr() and
mptcp_pm_announced_alloc(). Both take msk->pm.lock briefly to add to
their respective lists. Because the genl handler holds a sock reference,
mptcp_pm_destroy() may run on the same msk via mptcp_disconnect(), which
invokes mptcp_destroy_common() without dropping the sock refcount,
before the handler completes.
If the lock acquisitions interleave such that mptcp_pm_destroy() empties
a list first, the later alloc adds its entry to a list head that nothing
else iterates for this msk, and the entry leaks. kmemleak reports both
mptcp_pm_add_addr objects (from mptcp_pm_announced_alloc()) and
mptcp_pm_addr_entry objects (from
mptcp_userspace_pm_append_new_local_addr()) under sustained concurrent
ANNOUNCE + close load against the userspace PM.
Add an MPTCP_PM_DESTROYING bit in msk->pm.status, set by
mptcp_pm_destroy() under pm.lock before the lists are emptied and
checked under pm.lock by the alloc paths. Either the alloc takes pm.lock
first, in which case its entry is on the list when mptcp_pm_destroy()
frees it; or mptcp_pm_destroy() takes pm.lock first, in which case the
later alloc observes the bit and refuses.
Found by an MPTCP protocol-flow harness extending BRF (arXiv:2305.08782).
Fixes: 9ab4807c84a4 ("mptcp: netlink: Add MPTCP_PM_CMD_ANNOUNCE")
Cc: stable@vger.kernel.org
Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-6-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Inlined `mptcp_pm_destroy()` at its call site in `mptcp_destroy_common()` and moved the fences into the pre-rename `mptcp_pm_alloc_anno_list()`/`mptcp_free_local_addr_list()` equivalents, deleting the `mptcp_pm_is_userspace()` guard from inside the callee instead of the call site. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cdc36db204ffd97b947d64374cf23a210dc74777 ]
hci_find_adv_instance() returns an adv_info pointer that is valid only
while hdev->lock is held. The advertising command-sync paths perform
instance lookups without that lock and, in some cases, retain the pointer
while waiting for a controller response.
An advertising termination event can therefore interleave as follows:
hci_cmd_sync_work hci_rx_work
hci_find_adv_instance()
__hci_cmd_sync_status()
wait for controller reply hci_dev_lock()
hci_remove_adv_instance()
kfree(adv)
adv->scan_rsp_changed = false
KASAN reported:
BUG: KASAN: slab-use-after-free in hci_set_ext_scan_rsp_data_sync+0x2e1/0x300
Write of size 1 at addr ffff88810a45d21d by task kworker/u17:0/88
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
hci_set_ext_scan_rsp_data_sync+0x2e1/0x300
hci_schedule_adv_instance_sync+0x390/0x4c0
hci_cmd_sync_work+0x173/0x300
Allocated by task 87:
hci_add_adv_instance+0x538/0xac0
add_advertising+0x885/0x1160
Freed by task 89:
kfree+0x131/0x3c0
hci_remove_adv_instance+0x1d8/0x3b0
hci_le_ext_adv_term_evt+0x17b/0x730
Protect the instance lookup and payload construction in the extended
advertising, scan response, and periodic advertising data paths. Snapshot
the advertising parameters under hdev->lock, but release the lock before
waiting for the controller.
Clear advertising-data dirty bits before issuing their commands and
restore them after a failure using a fresh lookup. Likewise, update the
reported transmit power through a fresh lookup after the parameter command
completes. No adv_info pointer then survives an HCI command wait.
Fixes: cba6b758711c ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 2")
Cc: stable@vger.kernel.org
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c283e9ada7fcb7dd4b10592623086b2e6d2f9925 ]
xfrm_user_policy() clears the socket dst cache with __sk_dst_reset(),
i.e. the non-atomic __sk_dst_set(sk, NULL): it reads sk_dst_cache with
rcu_dereference_protected(), stores NULL and dst_release()s the old dst.
That is only safe if no other thread modifies sk_dst_cache concurrently.
For a connected UDP socket that does not hold: the transmit fast path
(udp_sendmsg -> sk_dst_check -> sk_dst_reset) resets the cache locklessly
with an atomic xchg(). A per-socket policy change racing a send can make
both sides observe the same old dst and each dst_release() it, dropping
the socket's single reference twice and freeing the xfrm_dst bundle while
it is still referenced:
BUG: KASAN: slab-use-after-free in dst_release
Write of size 4 at addr ffff88801897b6c0 by task exploit/155
Call Trace:
...
dst_release (... ./include/linux/rcuref.h:109)
xfrm_user_policy (./include/net/sock.h:2239 ./include/net/sock.h:2256 net/xfrm/xfrm_state.c:3053)
do_ip_setsockopt (net/ipv4/ip_sockglue.c:1347)
ip_setsockopt (net/ipv4/ip_sockglue.c:1417)
do_sock_setsockopt (net/socket.c:2368)
__sys_setsockopt (net/socket.c:2393)
__x64_sys_setsockopt (net/socket.c:2396)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Reachable by an unprivileged user via a user+network namespace.
Use the atomic sk_dst_reset() so the cache is cleared and released with a
single xchg(): whichever side wins releases the dst once, the other sees
NULL and does nothing. Behaviour is otherwise unchanged.
Fixes: 2b06cdf3e688 ("xfrm: Clear sk_dst_cache when applying per-socket policy.")
Fixes: be8f8284cd89 ("net: xfrm: allow clearing socket xfrm policies.")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a7aad5b69d3bdaec20a3ed9284e184502450c0cd ]
The timer callback reads entry->retrans_times outside pm.lock to decide
whether to call mptcp_pm_subflow_established(). Since
mptcp_pm_announced_del_timer() can concurrently set retrans_times =
ADD_ADDR_RETRANS_MAX under pm.lock, a race condition exists.
I discovered this issue while studying the code. AI tools helped me to
verify the issue can potentially happen under race conditions.
Use a local 'retransmit' flag set inside pm.lock to capture whether
retransmission is still possible when the lock is taken. This allows to
call mptcp_pm_subflow_established() accordingly, and not depending on
the situation that can be different when checked outside the pm.lock.
Fixes: 348d5c1dec60 ("mptcp: move to next addr when timeout")
Cc: stable@vger.kernel.org
Signed-off-by: Qing Luo <luoqing@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-4-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ applied to mptcp_pm_add_timer() in pm_netlink.c instead of pm.c and collapsed the adaptive backoff branch to `if (!retransmit) timeout = 0;` since the tree lacks exponential ADD_ADDR retransmission timeouts ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d0d48d999b0eee6bb176ef4e39d9be868fa80f7e upstream.
ip6_finish_output2() caches a pointer to the IPv6 destination
address (daddr) before invoking lwtunnel_xmit(). The LWT-BPF
transmit path or other encapsulation operations within
lwtunnel_xmit() can reallocate the skb head, freeing the memory
that daddr points to. When lwtunnel_xmit() returns
LWTUNNEL_XMIT_CONTINUE, the function continues to use the stale
daddr pointer to compute the nexthop and to look up or create the
neighbour entry. This results in a use-after-free read, which can
leak sensitive kernel data, pollute the neighbour table with
arbitrary values, misdirect traffic, or crash the system.
Fix this by re-fetching the IPv6 header and the destination
address pointer after lwtunnel_xmit() returns
LWTUNNEL_XMIT_CONTINUE, ensuring that the subsequent nexthop
computation and neighbour lookup operate on valid memory.
Fixes: e415ed3a4b8b ("ipv6: use skb_expand_head in ip6_finish_output2")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Luxiao Xu <rakukuip@gmail.com>
Signed-off-by: Ren Wei <weir@nebusec.ai>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/4aa3f53bc44e79572c6dd2340ec7b68ef1a3d87d.1786516730.git.rakukuip@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c0726f0caf8c6b3208552949e17d23634a2f3129 upstream.
ip_do_fragment() subtracts the IPv4 header length from the effective
MTU and passes the resulting payload MTU to ip_frag_next().
If the effective MTU is smaller than hlen + 8, ip_frag_next() rounds
the fragment payload length down to zero. The fragmentation state then
never makes forward progress: state->left, state->ptr and state->offset
stay unchanged while ip_do_fragment() keeps allocating and transmitting
header-only fragments until the softlockup detector fires.
This is reproducible with a route installed using "mtu lock 20", but it
is also reproducible without route MTU lock, for example by forwarding a
packet to a device whose MTU is 20.
Fix it in ip_do_fragment() by rejecting mtu < hlen + 8 with -EMSGSIZE,
matching the existing IPv6 fragmentation check.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Yong Wang <edragain@163.com>
Signed-off-by: Ren Wei <weir@nebusec.ai>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/8809ef6314b98913681b0b370a05a85c2b6cd579.1786599079.git.edragain@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 00ead17c7de137a692edee59f2772e6af687e8eb upstream.
ceph_start_decoding() validates that struct_len bytes remain in the
buffer after the encoding header, but accepts struct_len=0 as valid:
ceph_decode_need(p, end, 0, bad) always passes. When a malicious or
compromised OSD sends an obj_list_watch_response_t reply with
struct_len=0, ceph_start_decoding() returns success with p == end,
leaving zero bytes guaranteed for subsequent reads.
The immediately following ceph_decode_32(p) in decode_watchers() has
no preceding bounds check. With p == end this is a 4-byte read past
the validated buffer boundary. The garbage value is then passed
directly to kzalloc_objs() as the watcher count.
The sibling function decode_watcher() already uses the safe variants
(ceph_decode_copy_safe, ceph_decode_64_safe, ceph_decode_skip_32)
after its own ceph_start_decoding() call. decode_watchers() is the
only site that uses the bare variant, confirming an oversight.
Fix by replacing ceph_decode_32(p) with ceph_decode_32_safe(p, end,
*num_watchers, bad), consistent with the established pattern.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment (e.g. cloud) can trigger this against any kernel client
that calls CEPH_OSD_OP_LIST_WATCHERS, without any further privileges
beyond OSD session establishment.
[ idryomov: trim changelog ]
Cc: stable@vger.kernel.org
Fixes: a4ed38d7a180 ("libceph: support for CEPH_OSD_OP_LIST_WATCHERS")
Signed-off-by: Pavitra Jha <jhapavitra98@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
[ kept the tree's `kcalloc()` context line instead of upstream's `kzalloc_objs()` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0784d83df3bfc977c13252a0599be924f0afa68d upstream.
ndisc_send_redirect() is always called under rcu_read_lock().
It can use dev_net_rcu() and avoid one redundant
rcu_read_lock()/rcu_read_unlock() pair.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250214140705.2105890-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Li Xiasong <lixiasong1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2e65bafdfd3a8bba972b3d17b6a57816557530fc upstream.
When a connection is closed, nci_core_conn_close_rsp_packet() frees
conn_info but not conn_info->dest_params, which is a separate devm
allocation. Each connect/close cycle leaks one dest_params until the
NFC device is removed. Free dest_params along with conn_info.
Fixes: 9b8d1a4cf2aa ("nfc: nci: Add an additional parameter to identify a connection id")
Cc: stable@vger.kernel.org
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260721023518.1697625-1-lilinmao@kylinos.cn
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8cbe06c1e699c0a165dae5093a2550e65f914818 upstream.
nci_rf_discover_ntf_packet() and nci_rf_intf_activated_ntf_packet() each
parse a notification into an on-stack struct (nci_rf_discover_ntf /
nci_rf_intf_activated_ntf) that is not initialised. The RF
technology-specific parameters are only extracted when
rf_tech_specific_params_len is non-zero, so a notification that reports a
zero length leaves the rf_tech_specific_params union uninitialised - and
both handlers then pass it to nci_add_new_protocol(), which reads it:
- discover: nci_add_new_target() -> nci_add_new_protocol();
- activated: nci_target_auto_activated() -> nci_add_new_protocol().
nci_add_new_protocol() uses nfca_poll->nfcid1_len as both a branch
condition and a memcpy() length and copies nfcid1/sens_res/sel_res into
ndev->targets, which is later exposed to user space via NFC_CMD_GET_TARGET.
BUG: KMSAN: uninit-value in nci_add_new_protocol+0x624/0x6c0
nci_add_new_protocol+0x624/0x6c0
nci_ntf_packet+0x25b2/0x3c30
nci_rx_work+0x318/0x5d0
process_scheduled_works+0x84b/0x17a0
worker_thread+0xc10/0x11b0
kthread+0x376/0x500
Local variable ntf.i created at:
nci_ntf_packet+0xbc2/0x3c30
Zero-initialise both on-stack notifications so the union reads back as
zero when no technology-specific parameters are present.
Fixes: 019c4fbaa790 ("NFC: Add NCI multiple targets support")
Fixes: e8c0dacd9836 ("NFC: Update names and structs to NCI spec 1.0 d18")
Link: https://lore.kernel.org/netdev/20260623172109.1105965-2-horms@kernel.org/
Cc: stable@vger.kernel.org
Assisted-by: Bynario AI
Signed-off-by: Samuel Page <sam@bynar.io>
Link: https://patch.msgid.link/20260626090301.2139500-1-sam@bynar.io
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ac200079db50af81e6b04d058b33ec92901d8edd upstream.
nci_target_auto_activated() appends a target to the fixed-size array
ndev->targets[NCI_MAX_DISCOVERED_TARGETS] and increments ndev->n_targets
without first checking the array is full; unlike its sibling
nci_add_new_target(), which bails out when n_targets already equals
NCI_MAX_DISCOVERED_TARGETS.
ndev->n_targets is only cleared by nci_clear_target_list(), so an NFCC
that repeatedly re-runs discovery (RF_DISCOVER_RSP, which re-enters
NCI_DISCOVERY without clearing the target list) and reports an
auto-activated target (RF_INTF_ACTIVATED_NTF) drives n_targets past the
limit. The append then writes a struct nfc_target past the end of the
array (a slab out-of-bounds write), and nfc_targets_found() goes on to
walk the array with the inflated count:
BUG: KASAN: slab-out-of-bounds in nci_add_new_protocol+0x94/0x2ac [nci]
Write of size 2 at addr ffff0000c7299a18 by task kworker/u8:0/12
Workqueue: nfc0_nci_rx_wq nci_rx_work [nci]
Call trace:
nci_add_new_protocol+0x94/0x2ac [nci]
nci_ntf_packet+0xddc/0x11a0 [nci]
nci_rx_work+0x15c/0x1e0 [nci]
process_one_work+0x2dc/0x500
worker_thread+0x240/0x460
kthread+0x1c0/0x1d0
ret_from_fork+0x10/0x20
The buggy address belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1024 bytes to the right of
allocated 1560-byte region [ffff0000c7299000, ffff0000c7299618)
Guard nci_target_auto_activated() with the same check used by
nci_add_new_target().
Fixes: 019c4fbaa790 ("NFC: Add NCI multiple targets support")
Cc: stable@vger.kernel.org
Assisted-by: Bynario AI
Signed-off-by: Samuel Page <sam@bynar.io>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260622145243.3167276-1-sam@bynar.io
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 95674f506c6376d6722a23144c9acd26609771ed upstream.
Every LLCP PDU begins with a two-byte header (DSAP/SSAP + PTYPE), but the
receive path never checked that a frame is at least LLCP_HEADER_SIZE bytes
before parsing it.
nfc_llcp_rx_skb() reads the header via nfc_llcp_ptype()/nfc_llcp_dsap()/
nfc_llcp_ssap(), which dereference pdu->data[0] and pdu->data[1], and a
CONNECT or CC PDU then computes
tlv_array_len = skb->len - LLCP_HEADER_SIZE;
as a size_t and hands it to the TLV walk. When the frame is shorter than
the header the subtraction wraps to a huge value and the walk runs far
past the buffer, an out-of-bounds read.
A nearby NFC device can reach this without authentication; LLCP link
activation happens automatically after NFC-DEP.
Guard the common receive choke point __nfc_llcp_recv(), shared by both the
target (nfc_llcp_data_received()) and initiator (nfc_llcp_recv()) paths, so
a short skb is dropped before the rx_work worker parses it. Use
pskb_may_pull() rather than a skb->len test so the two header bytes are
guaranteed to sit in the skb linear area even for a non-linear skb,
matching how the sibling NCI and HCI receive paths validate their headers.
Reproduced with a KFENCE out-of-bounds read via /dev/virtual_nci on
linux-next.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Cc: stable@vger.kernel.org
Suggested-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260714164631.75068-1-doruk@0sec.ai
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 78b20c8eeacd2e44a2d8a4cb5316d3c521d90911 upstream.
nfc_llcp_parse_gb_tlv() and nfc_llcp_parse_connection_tlv() contain
three related bugs in their TLV parsing loops:
1. 'offset' is declared u8 but tlv_array_len is u16. When TLV data
advances offset past 255 it silently wraps to zero, causing
infinite loops or double-processing of buffer data.
2. Before reading tlv[0] (type) and tlv[1] (length) there is no
check that offset+2 <= tlv_array_len. A truncated TLV causes
an OOB read of one byte past the buffer end.
3. After reading the length field, the value bytes are accessed
without checking offset+2+length <= tlv_array_len. A crafted
length=0xFF on a short buffer causes up to 255 bytes of OOB
read past the buffer end.
Both functions are reachable without authentication via
nfc_llcp_set_remote_gb() which feeds remote LLCP general bytes
directly into nfc_llcp_parse_gb_tlv() with no additional
validation.
Fix all three issues by widening offset from u8 to u16 and adding
bounds checks for both the TLV header and value field before each
access.
Fixes: 3df40eb3a2ea ("nfc: constify several pointers to u8, char and sk_buff")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260622131802.239035-1-meatuni001@gmail.com
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 55c68ac93e7dacc0f5f608b9c39dd4ff48cf28e8 upstream.
Commit 27256cdb290e ("nfc: llcp: bound SNL TLV parsing to the skb and
add length checks") fixed the unbounded TLV walk in nfc_llcp_recv_snl(),
and commit d8bd2dedbde5 ("nfc: llcp: fix OOB read and u8 offset wrap in
TLV parsers") subsequently bounded nfc_llcp_parse_gb_tlv() and
nfc_llcp_parse_connection_tlv(). One sibling parser sharing the same
pattern remains unbounded: nfc_llcp_connect_sn().
nfc_llcp_connect_sn() walks a TLV list, reading a two-byte header
(type, length) followed by length bytes of value, without checking that
the two header bytes or the declared length stay within the buffer. It
returns a pointer to a service name of up to 255 bytes that may point
past the end of the skb; it is subsequently consumed by memcmp() in
nfc_llcp_sock_from_sn(). In addition tlv_array_len was computed as
"skb->len - LLCP_HEADER_SIZE" in size_t, so a CONNECT/CC frame shorter
than the LLCP header underflows to a huge length and the walk runs far
past the buffer.
nfc_llcp_connect_sn() is reachable from nfc_llcp_recv_connect() and
nfc_llcp_recv_cc(), i.e. from received CONNECT and CC PDUs. A nearby
NFC device can reach this without authentication; LLCP link activation
happens automatically after NFC-DEP, and the nfc_llcp_rx_skb()
dispatcher applies no minimum-length guard.
Walk the TLV list by pointer, bounded by skb_tail_pointer(skb), and
validate each declared length before use, matching the approach already
used for nfc_llcp_recv_snl(). Starting the walk at
&skb->data[LLCP_HEADER_SIZE] against the tail pointer also removes the
size_t underflow for short frames.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Cc: stable@vger.kernel.org
Assisted-by: 0sec:claude-opus-4-8
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260709131229.44477-1-doruk@0sec.ai
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 344a56d7c8e0f3cbaff0bcb1bcd95a1a1db24b16 upstream.
digital_in_recv_sensf_res() memcpy()s resp->len bytes from a remote
NFC-F device response into the NFC_SENSF_RES_MAXSIZE-byte target.sensf_res
field without an upper-bound check. A nearby malicious NFC-F device can
send an oversized SENSF_RES response to overflow the stack-local struct
nfc_target.
Clamp resp->len to NFC_SENSF_RES_MAXSIZE before the copy.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: 8c0695e4998d ("NFC Digital: Add NFC-F technology support")
Cc: stable@vger.kernel.org
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260603141355.68156-1-doruk@0sec.ai
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 653d7ddf6cba867777a3d14c4f83ace008c5ad13 ]
inet_frag_create() arms the fragment queue timer before inserting the
queue into the fqdir rhashtable. If the namespace fragment timeout is
zero or negative, the timer can run before the queue is published.
The timer callback then marks the queue complete, tries to remove a node
that is not in the hash table yet, and drops the anticipated hash
reference. Creation can subsequently publish the completed queue without
restoring that reference, leaving a stale hash node after the caller drops
the remaining reference.
Publish the queue first and arm the timer while holding the queue lock.
This makes timer expiry wait until the queue is visible in the hash table,
so inet_frag_kill() can remove the node and balance the hash reference.
Fixes: 648700f76b03 ("inet: frags: use rhashtables for reassembly units")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Link: https://patch.msgid.link/bf66785e7c0c139d7a1900e2f01faeeab344b960.1784948849.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ca0359df45a55a9eb4d6dc09a481064abf78320f ]
As mentioned in commit 648700f76b03 ("inet: frags:
use rhashtables for reassembly units"):
A followup patch will even remove the refcount hold/release
left from prior implementation and save a couple of atomic
operations.
This patch implements this idea, seven years later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250312082250.1803501-5-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 653d7ddf6cba ("inet: frags: publish queues before arming timer")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit eb0dfc0ef195a04e519b15d73cf25d8c25ee8df7 ]
In the following patch, we no longer assume inet_frag_kill()
callers own a reference.
Consuming two refcounts from inet_frag_kill() would lead in UAF.
Propagate the pointer to the refs that will be consumed later
by the final inet_frag_putn() call.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250312082250.1803501-4-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 653d7ddf6cba ("inet: frags: publish queues before arming timer")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a2fb987c0ecf0498cc17056339cb11d128c46ab7 ]
Replace ipq_put() with inet_frag_putn()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250312082250.1803501-3-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 653d7ddf6cba ("inet: frags: publish queues before arming timer")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ae2d90355aa5592b0e99c8bbb4c3fa1d8e205f1b ]
inet_frag_putn() can release multiple references
in one step.
Use it in inet_frags_free_cb().
Replace inet_frag_put(X) with inet_frag_putn(X, 1)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250312082250.1803501-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 653d7ddf6cba ("inet: frags: publish queues before arming timer")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 43a556b2fd43f2df6dded59c2e26560a27874c24 upstream.
rfcomm_sock_recvmsg() completes a deferred setup by calling
rfcomm_dlc_accept() without holding any RFCOMM lock:
if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) {
rfcomm_dlc_accept(d);
return 0;
}
and rfcomm_dlc_accept() dereferences the session on its first line:
struct sock *sk = d->session->sock->sk;
Every other path that touches d->session runs under rfcomm_mutex:
rfcomm_dlc_open(), rfcomm_dlc_close(), rfcomm_dlc_exists(),
rfcomm_dlc_send_rpn(), and the RFCOMM thread through
rfcomm_process_sessions(). rfcomm_connect_ind() is even documented as
"called under rfcomm_lock()". This call site is the only one that skips
it.
The RFCOMM_DEFER_SETUP bit looks like it serialises the accept against
teardown, since __rfcomm_dlc_close() returns early when it wins the
test_and_clear. But rfcomm_recv_disc() forces the state first:
d->state = BT_CLOSED;
__rfcomm_dlc_close(d, err);
and the early return only covers BT_CONNECT, BT_CONFIG, BT_OPEN and
BT_CONNECT2. With the state already BT_CLOSED that switch does not
match, the bit is never consulted, and __rfcomm_dlc_close() falls
through to rfcomm_dlc_unlink(), which sets d->session = NULL.
So a remote DISC on a deferred dlc clears the session while leaving
RFCOMM_DEFER_SETUP set. The next recvmsg() then passes the
test_and_clear and dereferences a NULL session. No timing window is
needed: once the DISC has been processed, the dereference is
unconditional.
Give rfcomm_dlc_accept() the same shape as rfcomm_dlc_open() and
rfcomm_dlc_close(): an exported wrapper that takes rfcomm_mutex and
re-checks the session, around a __rfcomm_dlc_accept() that the two
in-core callers, which already hold the mutex, keep using.
Reproduced on a KASAN + PROVE_LOCKING kernel with a BR/EDR peer emulated
over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the
RFCOMM PSM, starts a session, opens a dlc on a channel bound with
BT_DEFER_SETUP, and sends DISC after the socket is accepted. recv() on
the accepted socket then hits:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:rfcomm_dlc_accept+0x54/0x350
Call Trace:
rfcomm_sock_recvmsg+0x1cd/0x230
sock_recvmsg+0x166/0x1c0
__sys_recvfrom+0x20d/0x300
0x10 is the offset of sock in struct rfcomm_session. With this patch the
same run completes with recv() returning 0 and no report, and lockdep
stays quiet, confirming rfcomm_mutex is still taken before lock_sock on
this path as it is on the thread side.
Fixes: bb23c0ab8246 ("Bluetooth: Add support for deferring RFCOMM connection setup")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d3ed6dee73c560fad0a8e152c8e233b3fb3a2e44 upstream.
After the blamed commits below, some UDP tunnel use dstats for
accounting. On the xmit path, all the UDP-base tunnels ends up
using iptunnel_xmit_stats() for stats accounting, and the latter
assumes the relevant (tunnel) network device uses tstats.
The end result is some 'funny' stat report for the mentioned UDP
tunnel, e.g. when no packet is actually dropped and a bunch of
packets are transmitted:
gnv2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue \
state UNKNOWN mode DEFAULT group default qlen 1000
link/ether ee:7d:09:87:90:ea brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
14916 23 0 15 0 0
TX: bytes packets errors dropped carrier collsns
0 1566 0 0 0 0
Address the issue ensuring the same binary layout for the overlapping
fields of dstats and tstats. While this solution is a bit hackish, is
smaller and with no performance pitfall compared to other alternatives
i.e. supporting both dstat and tstat in iptunnel_xmit_stats() or
reverting the blamed commit.
With time we should possibly move all the IP-based tunnel (and virtual
devices) to dstats.
Fixes: c77200c07491 ("bareudp: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Fixes: 6fa6de302246 ("geneve: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Fixes: be226352e8dc ("vxlan: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/2e1c444cf0f63ae472baff29862c4c869be17031.1738432804.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2195424c3da2ef1829a63b807e3a900a90e57d85 upstream.
The x25 timers are armed with mod_timer() and cancelled with
timer_delete(), so a pending timer holds no reference on the socket and a
cancel does not wait for a callback already running on another CPU.
x25_heartbeat_expiry() also rearms unconditionally, so it can reinstall
sk->sk_timer after __x25_destroy_socket() has passed its cancel point.
The following __sock_put() frees the socket while the timer is still
queued, and the next expiry uses freed memory. KASAN reports a
slab-use-after-free on the kmalloc-2k object freed by close().
timer_delete_sync() cannot be used here: x25_heartbeat_expiry() and
x25_timer_expiry() both reach the cancels from inside the timer they
would wait on, through __x25_destroy_socket() and x25_disconnect().
Arm the timers with sk_reset_timer() and cancel them with sk_stop_timer()
so that an armed timer owns a reference, and release it in both expiry
handlers. Rearm the heartbeat only while sk_hashed(sk) is still true,
since __x25_destroy_socket() unlinks the socket before dropping it. Arm
the deferred destroy timer the same way and drop its reference in
x25_destroy_timer().
Reproduced on net with KASAN, with the heartbeat period shortened so the
window recurs. With this patch the reproducer no longer triggers a
report and /proc/net/x25 drains.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260726220342.47245-1-baul.lee@xbow.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ adjusted context due to `del_timer()` not yet renamed to `timer_delete()` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 120977e2c096deea4e866e4273be9220b957c29e ]
cls_bpf_prog_from_efd() obtained a SCHED_CLS program via
bpf_prog_get_type_dev() but never verified that a device-bound (offloaded)
program's bound netdev matches the TC netdev the classifier is being
attached to. This let a program loaded with prog_ifindex for device A be
attached via cls_bpf + skip_sw to device B; deleting device A then
destroyed the program's offload state while it was still attached to
device B, triggering a netdevsim WARN (panic with panic_on_warn=1).
Mirror the XDP attach path (net/core/dev.c) and reject the attach with
-EINVAL when a dev-bound program's bound device does not match the
target device.
Fixes: 2b3486bc2d23 ("bpf: Introduce device-bound XDP programs")
Reported-by: vega@nebusec.ai
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260809094418.901607-1-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6d3724e616faf952c3adcf8414fc21a828ef3709 ]
u32_walk() enumerates both struct tc_u_hnode and struct tc_u_knode
through the walker callback. u32_bind_class() unconditionally casts the
passed fh to tc_u_knode and accesses &n->res, so when fh is actually a
tc_u_hnode, which has no tcf_result member, this results in a
slab-out-of-bounds read of res->classid in tc_cls_bind_class().
The issue can be reproduced with the following commands:
tc qdisc add dev lo root handle 1: hfsc
tc class add dev lo parent 1: classid 1:1 hfsc sc rate 1000kbit
tc filter add dev lo parent 1:1 protocol ip prio 1 u32 match u32 0 0 flowid 1:1
tc class add dev lo parent 1: classid 1:2 hfsc sc rate 2000kbit
Fix this by skipping hash tables via the TC_U32_KEY(handle) check.
Fixes: 07d79fc7d94e ("net_sched: add reverse binding for tc class")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/1786089038-36366-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f60b396ee174206fe08ebf997d16cd3801b77b22 ]
tcf_action_exec() handles TC_ACT_GOTO_CHAIN by first checking
rcu_access_pointer(a->goto_chain) and then calling
tcf_action_goto_chain_exec(), which does a second, independent
rcu_dereference_bh(a->goto_chain) read and immediately dereferences
chain->filter_chain. A concurrent tcf_action_set_ctrlact() (e.g. the gact
replace path) can clear a->goto_chain between the two reads, so the second
read returns NULL and tcf_action_goto_chain_exec() dereferences NULL.
Fix the race by doing a single rcu_dereference_bh() read of a->goto_chain
in tcf_action_exec(), checking it once for NULL, and passing the resulting
chain pointer into tcf_action_goto_chain_exec(). This turns the split
check/use into a single check/use on one value.
Fixes: ee3bbfe806cd ("net/sched: let actions use RCU to access 'goto_chain'")
Reported-by: vega@nebusec.ai
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20260809090928.868186-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4cf24dc8934074725042c0bd10b91f4d4b5269bb ]
Continue expanding Daniel's patch by adding new skb drop reasons that
are idiosyncratic to TC.
More specifically:
- SKB_DROP_REASON_TC_COOKIE_ERROR: An error occurred whilst
processing a tc ext cookie.
- SKB_DROP_REASON_TC_CHAIN_NOTFOUND: tc chain lookup failed.
- SKB_DROP_REASON_TC_RECLASSIFY_LOOP: tc exceeded max reclassify loop
iterations
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: f60b396ee174 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fb2780721ca5e9f78bbe4544b819b929a982df9c ]
Move drop_reason from struct tcf_result to skb cb - more specifically to
struct tc_skb_cb. With that, we'll be able to also set the drop reason for
the remaining qdiscs (aside from clsact) that do not have access to
tcf_result when time comes to set the skb drop reason.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: f60b396ee174 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2f57dd94bdef083855366138646b26b05f410d99 ]
Commit da37845fdce2 ("packet: uses kfree_skb() for errors.") switches
from consume_skb to kfree_skb to improve error handling. However, this
could bring a lot of noises when we monitor real packet drops in
kfree_skb[1], because in tpacket_rcv or packet_rcv only packet clones
can be freed, not actual packets.
Adding a generic drop reason to allow distinguish these "clone drops".
[1]: https://lore.kernel.org/netdev/CABWYdi00L+O30Q=Zah28QwZ_5RU-xcxLFUK2Zj08A8MrLk9jzg@mail.gmail.com/
Fixes: da37845fdce2 ("packet: uses kfree_skb() for errors.")
Suggested-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/ZW4piNbx3IenYnuw@debian.debian
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: f60b396ee174 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 40cb2fdfed342e7e578d551a073687789f698d89 ]
Getting the following splat [1] with CONFIG_DEBUG_NET=y and this
reproducer [2]. Problem seems to be that classifiers clear 'struct
tcf_result::drop_reason', thereby triggering the warning in
__kfree_skb_reason() due to reason being 'SKB_NOT_DROPPED_YET' (0).
Fixed by disambiguating a legit error from a verdict with a bogus drop_reason
[1]
WARNING: CPU: 0 PID: 181 at net/core/skbuff.c:1082 kfree_skb_reason+0x38/0x130
Modules linked in:
CPU: 0 PID: 181 Comm: mausezahn Not tainted 6.6.0-rc6-custom-ge43e6d9582e0 #682
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
RIP: 0010:kfree_skb_reason+0x38/0x130
[...]
Call Trace:
<IRQ>
__netif_receive_skb_core.constprop.0+0x837/0xdb0
__netif_receive_skb_one_core+0x3c/0x70
process_backlog+0x95/0x130
__napi_poll+0x25/0x1b0
net_rx_action+0x29b/0x310
__do_softirq+0xc0/0x29b
do_softirq+0x43/0x60
</IRQ>
[2]
ip link add name veth0 type veth peer name veth1
ip link set dev veth0 up
ip link set dev veth1 up
tc qdisc add dev veth1 clsact
tc filter add dev veth1 ingress pref 1 proto all flower dst_mac 00:11:22:33:44:55 action drop
mausezahn veth0 -a own -b 00:11:22:33:44:55 -q -c 1
Ido reported:
[...] getting the following splat [1] with CONFIG_DEBUG_NET=y and this
reproducer [2]. Problem seems to be that classifiers clear 'struct
tcf_result::drop_reason', thereby triggering the warning in
__kfree_skb_reason() due to reason being 'SKB_NOT_DROPPED_YET' (0). [...]
[1]
WARNING: CPU: 0 PID: 181 at net/core/skbuff.c:1082 kfree_skb_reason+0x38/0x130
Modules linked in:
CPU: 0 PID: 181 Comm: mausezahn Not tainted 6.6.0-rc6-custom-ge43e6d9582e0 #682
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
RIP: 0010:kfree_skb_reason+0x38/0x130
[...]
Call Trace:
<IRQ>
__netif_receive_skb_core.constprop.0+0x837/0xdb0
__netif_receive_skb_one_core+0x3c/0x70
process_backlog+0x95/0x130
__napi_poll+0x25/0x1b0
net_rx_action+0x29b/0x310
__do_softirq+0xc0/0x29b
do_softirq+0x43/0x60
</IRQ>
[2]
#!/bin/bash
ip link add name veth0 type veth peer name veth1
ip link set dev veth0 up
ip link set dev veth1 up
tc qdisc add dev veth1 clsact
tc filter add dev veth1 ingress pref 1 proto all flower dst_mac 00:11:22:33:44:55 action drop
mausezahn veth0 -a own -b 00:11:22:33:44:55 -q -c 1
What happens is that inside most classifiers the tcf_result is copied over
from a filter template e.g. *res = f->res which then implicitly overrides
the prior SKB_DROP_REASON_TC_{INGRESS,EGRESS} default drop code which was
set via sch_handle_{ingress,egress}() for kfree_skb_reason().
Commit text above copied verbatim from Daniel. The general idea of the patch
is not very different from what Ido originally posted but instead done at the
cls_api codepath.
Fixes: 54a59aed395c ("net, sched: Make tc-related drop reason more flexible")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/netdev/ZTjY959R+AFXf3Xy@shredder
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: f60b396ee174 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 39d08b91646d83e87f7cbcd846b3ef33b1a53b79 ]
Add an initial user for the newly added tcf_set_drop_reason() helper to set the
drop reason for internal errors leading to TC_ACT_SHOT inside {__,}tcf_classify().
Right now this only adds a very basic SKB_DROP_REASON_TC_ERROR as a generic
fallback indicator to mark drop locations. Where needed, such locations can be
converted to more specific codes, for example, when hitting the reclassification
limit, etc.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Victor Nogueira <victor@mojatatu.com>
Link: https://lore.kernel.org/r/20231009092655.22025-2-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: f60b396ee174 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 54a59aed395ce0f4177b5212e5746a6462de3ad9 ]
Currently, the kfree_skb_reason() in sch_handle_{ingress,egress}() can only
express a basic SKB_DROP_REASON_TC_INGRESS or SKB_DROP_REASON_TC_EGRESS reason.
Victor kicked-off an initial proposal to make this more flexible by disambiguating
verdict from return code by moving the verdict into struct tcf_result and
letting tcf_classify() return a negative error. If hit, then two new drop
reasons were added in the proposal, that is SKB_DROP_REASON_TC_INGRESS_ERROR
as well as SKB_DROP_REASON_TC_EGRESS_ERROR. Further analysis of the actual
error codes would have required to attach to tcf_classify via kprobe/kretprobe
to more deeply debug skb and the returned error.
In order to make the kfree_skb_reason() in sch_handle_{ingress,egress}() more
extensible, it can be addressed in a more straight forward way, that is: Instead
of placing the verdict into struct tcf_result, we can just put the drop reason
in there, which does not require changes throughout various classful schedulers
given the existing verdict logic can stay as is.
Then, SKB_DROP_REASON_TC_ERROR{,_*} can be added to the enum skb_drop_reason
to disambiguate between an error or an intentional drop. New drop reason error
codes can be added successively to the tc code base.
For internal error locations which have not yet been annotated with a
SKB_DROP_REASON_TC_ERROR{,_*}, the fallback is SKB_DROP_REASON_TC_INGRESS and
SKB_DROP_REASON_TC_EGRESS, respectively. Generic errors could be marked with a
SKB_DROP_REASON_TC_ERROR code until they are converted to more specific ones
if it is found that they would be useful for troubleshooting.
While drop reasons have infrastructure for subsystem specific error codes which
are currently used by mac80211 and ovs, Jakub mentioned that it is preferred
for tc to use the enum skb_drop_reason core codes given it is a better fit and
currently the tooling support is better, too.
With regards to the latter:
[...] I think Alastair (bpftrace) is working on auto-prettifying enums when
bpftrace outputs maps. So we can do something like:
$ bpftrace -e 'tracepoint:skb:kfree_skb { @[args->reason] = count(); }'
Attaching 1 probe...
^C
@[SKB_DROP_REASON_TC_INGRESS]: 2
@[SKB_CONSUMED]: 34
^^^^^^^^^^^^ names!!
Auto-magically. [...]
Add a small helper tcf_set_drop_reason() which can be used to set the drop reason
into the tcf_result.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Victor Nogueira <victor@mojatatu.com>
Link: https://lore.kernel.org/netdev/20231006063233.74345d36@kernel.org
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231009092655.22025-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: f60b396ee174 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6bcd76c134c55c697148acb5c0194e9666abdf84 ]
syzbot reported a WARNING in __dev_queue_xmit() triggered via tpacket_snd():
skb_assert_len
WARNING: at include/linux/skbuff.h:2753 skb_assert_len
WARNING: at __dev_queue_xmit+0x21bc/0x4970 net/core/dev.c:4781
Call Trace:
<TASK>
dev_queue_xmit include/linux/netdevice.h:3448 [inline]
packet_xmit+0x243/0x310 net/packet/af_packet.c:276
tpacket_snd net/packet/af_packet.c:2907 [inline]
packet_sendmsg+0x28d6/0x4eb0 net/packet/af_packet.c:3134
When sending 0-byte packets via TPACKET ring buffer on devices with no
hard header (e.g. dev->hard_header_len == 0), tpacket_fill_skb()
populates an skb with skb->len == 0 and returns 0. tpacket_snd() then
forwards this empty skb to packet_xmit(), causing __dev_queue_xmit() to
hit skb_assert_len(skb).
Similar checks exist in packet_snd() via commit dc633700f00f
("net/af_packet: check len when min_header_len equals to 0") and in
packet_sendmsg_spkt() via commit 6a341729fb31 ("af_packet: Don't send
zero-byte data in packet_sendmsg_spkt().").
Return -EINVAL in tpacket_fill_skb() when skb->len is zero to reject
zero-length packets in tpacket_snd().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+30b93b6845b19cc38581@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a79e807.01d0871a.3a0d52.00ac.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260810150447.1220864-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 976df67f463db1fddaf2a32fb04f57ad2891a23d ]
When an async decrypt fails, tls_decrypt_done() records the error in
ctx->async_wait.err and calls tls_err_abort(), which stores it in
sk_err. tls_sw_recvmsg() and tls_sw_read_sock() each read
async_wait.err once they hold the reader lock and fail the call: a
record that did not authenticate breaks the connection.
tls_sw_splice_read() has no such check, and sk_err does not stand in
for one. tls_rx_rec_wait() tests sk_err only inside the loop it
skips whenever a record is already parsed, and the first reader to
reach sock_error() clears it, while async_wait.err persists. A
splice therefore keeps delivering records on a connection that
recvmsg() and read_sock() refuse to read.
Read async_wait.err in tls_sw_splice_read() as the other two readers
do.
Fixes: f314bfee81b1 ("tls: rx: return the already-copied data on crypto error")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Chuck Lever <cel@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260806-tls-splice-crypto-fix-v1-1-a2624005a286@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 01fdecc0480d916c799dbee584833a4a37e94d06 ]
In packet_parse_headers(), when processing a VLAN-tagged frame,
skb_set_network_header() is called to advance network_header past the
VLAN tag to the inner protocol header. skb_probe_transport_header() is
then called with skb->protocol still set to the outer VLAN EtherType
(e.g. ETH_P_8021Q), while nhoff (derived from skb_network_offset())
already points past the VLAN tag to the inner protocol header.
In __skb_flow_dissect(), proto is initialized to ETH_P_8021Q and nhoff
points past the VLAN tag. When the dissector hits case ETH_P_8021Q, it
reads a struct vlan_hdr at nhoff via __skb_header_pointer(), but that
offset contains the inner protocol header (e.g. an IP header). The bytes
are misinterpreted as a VLAN header, yielding a garbage encapsulated
EtherType that matches no known protocol. The dissector returns false,
so skb_probe_transport_header() never calls skb_set_transport_header(),
leaving transport_header at its uninitialized sentinel value (~0U).
Move skb_probe_transport_header() to before skb_set_network_header(). At
the time skb_probe_transport_header() is called, network_header still
points to the VLAN header, so nhoff correctly points to the VLAN header.
The flow dissector can then parse the VLAN header, extract the inner
EtherType, and advance nhoff to the inner protocol header, allowing
transport_header to be set correctly.
Fixes: dfed913e8b55 ("net/af_packet: add VLAN support for AF_PACKET SOCK_RAW GSO")
Assisted-by: WChat:claude-opus-4-8
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260807063405.688780-2-wei.fang@oss.nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 490937b88cb592cc0c5367758edd700fd5abd15c ]
For bitmap this change makes no difference, because destructors are
called synchronously.
List type however calls them via call_rcu() so accounting decrement can
happen after list_set_flush() set ext_size to 0.
'set->elements = 0' can be removed for the same reason in the list type
case, it calls 'set->elements--' for each element.
Fixes: 9e41f26a505c ("netfilter: ipset: Count non-static extension memory for userspace")
Suggested-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4cbd69766b35a089664cadb1f613bb85f7ef77a9 ]
If list_set_uadd() calls list_set_replace() to swap an expired entry,
the element count remains the same, therefore the increment must be elided.
Fixes: 702b71e7c666 ("netfilter: ipset: Add element count to all set types header")
Link: https://sashiko.dev/#/patchset/20260806101947.2802-1-fw%40strlen.de
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2014ac62df9d45bb9a004a043e85df7be09ed780 ]
nf_flow_table_iterate() only treats original-direction tuple nodes as
owning entries. Publishing the original node first lets GC observe and
free a flow while flow_offload_add() is still inserting the reply node.
Publish the reply node first and the original node last so GC never
sees a partially installed flow.
KASAN can trigger slab-use-after-free read and write reports in the
flowtable/rhashtable path (rht_deferred_worker, jhash, flow_offload_del,
flow_offload_lookup, etc.).
Fixes: ac2a66665e23 ("netfilter: add generic flow table infrastructure")
Signed-off-by: Jérémy Jean <Jeremy.Jean@oss.cyber.gouv.fr>
Assisted-by: Codex:gpt-5
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d02f592064347e0c1e0d84f24941ad338838cc48 ]
In nft_flow_rule_offload_abort(), WARN_ON_ONCE(err) is triggered on every
error during rollback, including -ENOMEM. Memory allocation failures are
expected under low-memory conditions and do not indicate a kernel bug.
Trace for example:
nft_flow_offload_chain() // FLOW_BLOCK_BIND
nft_flow_block_chain()
nft_chain_offload_cmd()
nft_block_offload_cmd()
->ndo_setup_tc()
nsim_setup_tc()
flow_block_cb_setup_simple()
flow_block_cb_alloc() // fails to -ENOMEM
The warning was reproduced on the 5.10 stable kernel under memory pressure
via fault injection, but the underlying bug exists in mainline as well,
as demonstrated by the ENOMEM trace above. The following splat was
triggered during nf_tables transaction processing:
WARNING: CPU: 0 PID: 8567 at net/netfilter/nf_tables_offload.c:532 nft_flow_rule_offload_abort net/netfilter/nf_tables_offload.c:532 [inline]
WARNING: CPU: 0 PID: 8567 at net/netfilter/nf_tables_offload.c:532 nft_flow_rule_offload_commit+0x971/0xcd0 net/netfilter/nf_tables_offload.c:591
Modules linked in:
CPU: 0 PID: 8567 Comm: syz-executor.0 Not tainted 5.10.260-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:nft_flow_rule_offload_abort net/netfilter/nf_tables_offload.c:532 [inline]
RIP: 0010:nft_flow_rule_offload_commit+0x971/0xcd0 net/netfilter/nf_tables_offload.c:591
Call Trace:
nf_tables_commit+0x3bd/0x4bd0 net/netfilter/nf_tables_api.c:8604
nfnetlink_rcv_batch+0xb1e/0x1f20 net/netfilter/nfnetlink.c:509
nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:579 [inline]
nfnetlink_rcv+0x3b3/0x420 net/netfilter/nfnetlink.c:597
netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
netlink_unicast+0x6cd/0xa00 net/netfilter/af_netlink.c:1340
netlink_sendmsg+0x906/0xe10 net/netfilter/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
__sock_sendmsg+0x155/0x190 net/socket.c:663
____sys_sendmsg+0x705/0x870 net/socket.c:2379
___sys_sendmsg+0x100/0x170 net/socket.c:2433
__sys_sendmsg+0xe9/0x1c0 net/socket.c:2462
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Change the condition to WARN_ON_ONCE(err && err != -ENOMEM) so that
warnings are only emitted for unexpected errors. This aligns with the
common kernel practice of not warning on -ENOMEM.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 63b48c73ff56 ("netfilter: nf_tables_offload: undo updates if transaction fails")
Signed-off-by: Alexey Velichayshiy <a.velichayshiy@ispras.ru>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0c88868271653537ed443272dd8e7d13634d214b ]
__ip_set_put_byindex() resolved the index to a set pointer under RCU,
then took ip_set_ref_lock in __ip_set_put() to decrement set->ref.
ip_set_swap() holds that same lock while swapping both the ip_set_list
slots and the two sets' ref counters, so it can interleave between the
dereference and the lock acquisition, leaving the caller to decrement a
set whose reference already moved to the other index and hit
BUG_ON(set->ref == 0). list_set_gc() reaches this from timer softirq,
which the nfnl mutex does not serialize against swap: an expiring
list:set member calls list_set_del() -> ip_set_put_byindex() while
IPSET_CMD_SWAP runs on the referenced sets.
Resolve the index and decrement under ip_set_ref_lock, as ip_set_swap()
already does, keeping the refcount tied to the index rather than to a
stale set pointer.
kernel BUG at net/netfilter/ipset/ip_set_core.c:685!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:ip_set_put_byindex (net/netfilter/ipset/ip_set_core.c:870)
Call Trace:
<IRQ>
list_set_del (net/netfilter/ipset/ip_set_list_set.c:159)
set_cleanup_entries (net/netfilter/ipset/ip_set_list_set.c:181)
list_set_gc (net/netfilter/ipset/ip_set_list_set.c:578)
call_timer_fn (kernel/time/timer.c:1748)
__run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2374)
run_timer_softirq (kernel/time/timer.c:2405)
</IRQ>
Kernel panic - not syncing: Fatal exception in interrupt
Fixes: 9076aea76538 ("netfilter: ipset: Increase the number of maximal sets automatically")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 817ff6efdb7f484ea547218e11e17d8e43daa3b4 ]
pktgen_change_name() replaces pkt_dev->entry while holding t->if_lock.
pktgen_remove_device() removes the same entry before
_rem_dev_from_if_list() takes that lock.
This allows the following interleaving:
CPU 0 (NETDEV_CHANGENAME) CPU 1 (kpktgend)
if_lock(t)
proc_remove(pkt_dev->entry)
proc_remove(pkt_dev->entry)
pkt_dev->entry = proc_create_data(...)
if_unlock(t)
The kthread can pass the stale proc_dir_entry to proc_remove() after the
rename path has freed it. A reproducer with a widened race window reports:
BUG: KASAN: slab-use-after-free in proc_remove+0x78/0x80
Read of size 8 at addr ffff8881478fea70 by task kpktgend_0/67
Call Trace:
proc_remove+0x78/0x80
pktgen_remove_device.isra.0+0x11c/0x4c0
pktgen_thread_worker+0x1214/0x6bc0
kthread+0x2c6/0x3b0
Allocated by task 95:
__proc_create+0x204/0x790
proc_create_data+0x72/0xe0
pktgen_thread_write+0xd61/0x1510
Freed by task 28:
kmem_cache_free+0xcb/0x3d0
proc_free_inode+0x5b/0x80
rcu_core+0x50a/0x1850
The buggy address belongs to the object at ffff8881478fea00
which belongs to the cache proc_dir_entry of size 192
Move proc_remove() into the if_lock-protected list removal helper. Keep it
before list_del_rcu() to preserve the ordering required by add_device().
The rename path must then finish replacing the entry before removal, or
it observes that the device is no longer on the list.
Fixes: 39df232f1a9b ("[PKTGEN]: fix device name handling")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260719145740.2888967-1-nicoyip.dev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 870b856cb478bc02fffe4d89897e62c692efb09a ]
Fix checkpatch code style warnings:
WARNING: Block comments use a trailing */ on a separate line
+ * removal by worker thread */
WARNING: Block comments use * on subsequent lines
+ __u8 tos; /* six MSB of (former) IPv4 TOS
+ are for dscp codepoint */
WARNING: Block comments use a trailing */ on a separate line
+ are for dscp codepoint */
WARNING: Block comments use * on subsequent lines
+ __u8 traffic_class; /* ditto for the (former) Traffic Class in IPv6
+ (see RFC 3260, sec. 4) */
WARNING: Block comments use a trailing */ on a separate line
+ (see RFC 3260, sec. 4) */
WARNING: Block comments use * on subsequent lines
+ /* = {
+ 0x00, 0x80, 0xC8, 0x79, 0xB3, 0xCB,
WARNING: Block comments use * on subsequent lines
+ /* Field for thread to receive "posted" events terminate,
+ stop ifs etc. */
WARNING: Block comments use a trailing */ on a separate line
+ stop ifs etc. */
WARNING: Block comments should align the * on each line
+ * we go look for it ...
+*/
WARNING: Block comments use a trailing */ on a separate line
+ * we resolve the dst issue */
WARNING: Block comments use a trailing */ on a separate line
+ * with proc_create_data() */
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 817ff6efdb7f ("net: pktgen: fix proc entry use-after-free")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a28c4fcbf774e23b4779cae468e3497a5ad1f4a1 ]
The SYN-RECEIVED request-socket path in tcp_check_req() accepts an
in-window RST without requiring SEG.SEQ to exactly match RCV.NXT. A
non-exact RST therefore removes the request instead of eliciting a
challenge ACK.
RFC 9293 section 3.10.7.4 applies the RFC 5961 reset check in
SYN-RECEIVED: an exact RST resets the connection, while a non-exact
in-window RST must trigger a challenge ACK and be dropped.
Apply that check before the ACK-field validation, following the RFC
sequence-number, RST, then ACK processing order. Factor the per-netns
challenge ACK quota out of tcp_send_challenge_ack() so request sockets
can share it. Use the request socket's send_ack() callback and its own
out-of-window ACK timestamp to send and rate-limit the response.
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Fixes: 282f23c6ee34 ("tcp: implement RFC 5961 3.2")
Cc: stable@vger.kernel.org
Signed-off-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260717081443.809393-2-yangyx22@mails.tsinghua.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9866884ce8ef25338c5b33cbb97c2b5d92088528 ]
Accurate ECN needs to send custom flags to handle IP-ECN
field reflection during handshake.
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: a28c4fcbf774 ("tcp: challenge ACK for non-exact RST in SYN-RECEIVED")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f43ee0c0730d6191629b5ee1ceae27b1ebfdc047 ]
qdisc_get_rtab() and qdisc_put_rtab() mutate the process-global singly
linked list qdisc_rtab_list and a plain non-atomic 'int refcnt' with no
lock. This was only safe because every caller historically held the RTNL
mutex, which serialized all rate-table lookups, inserts and frees.
That invariant no longer holds. cls_flower sets
TCF_PROTO_OPS_DOIT_UNLOCKED, so tc_new_tfilter() keeps rtnl_held == false
for it and sets TCA_ACT_FLAGS_NO_RTNL. That flag propagates through
tcf_exts_validate_ex() -> tcf_action_init() -> tcf_action_init_1() ->
tcf_police_init(), which calls qdisc_get_rtab()/qdisc_put_rtab() with the
RTNL mutex NOT held. Two RTM_NEWTFILTER requests on different CPUs, each
adding a flower filter with a police action carrying the same rate, then
race on qdisc_rtab_list and on the non-atomic refcnt, leading to a
use-after-free / double-free of the kmalloc-2k struct qdisc_rate_table.
qdisc_rtab_list is a single global (not per-netns), so the corrupted
object is shared system-wide.
BUG: KASAN: slab-use-after-free in qdisc_put_rtab+0x12f/0x160
qdisc_put_rtab+0x12f/0x160
tcf_police_init+0xda9/0x1590
tcf_action_init_1+0x460/0x6b0
tcf_action_init+0x439/0xa40
tcf_exts_validate_ex+0x42d/0x550
fl_change+0xddd/0x7da0
tc_new_tfilter+0xaa7/0x2420
rtnetlink_rcv_msg+0x95e/0xe90
which belongs to the cache kmalloc-2k of size 2048
Protect qdisc_rtab_list and the refcount with a dedicated spinlock. The
(sleeping, GFP_KERNEL) allocation in qdisc_get_rtab() is performed before
taking the lock; if a concurrent inserter added an identical table in the
meantime the freshly allocated one is freed under the lock, so no
duplicate is leaked. qdisc_put_rtab() now decrements the refcount and
unlinks under the same lock.
Fixes: 470502de5bdb ("net: sched: unlock rules update API")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Aldo Ariel Panzardo <qwe.aldo@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260715114114.446841-1-qwe.aldo@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e751256486d0ded20f5a9f9863467f1dce65142f ]
Commit 0ab03f353d36 ("net-gro: Fix GRO flush when receiving a GSO
packet.") added a flush check to skb_gro_receive(), but
skb_gro_receive_list() lacks the same validation.
As a result, packets marked with NAPI_GRO_CB(skb)->flush may still be
re-aggregated.
This allows already-GRO'd packets with existing frag_list to be
re-aggregated into a new GRO session, corrupting the frag_list chain
structure. When skb_segment() attempts to unpack these malformed packets,
it encounters invalid state and triggers a kernel panic.
Scenario (Tethering/Device forwarding):
1. Driver: Generated aggregated packet P1 via LRO with frag_list
2. Dev A: Receives aggregated fraglist packet and flush flag set
3. Dev A: Re-enters GRO, skb_gro_receive_list() is called
4. Missing flush check allows re-aggregation despite flush flag
5. Frag_list chain becomes corrupted (loops or dangling refs)
6. Dev B: TX path calls skb_segment(), crashes on corrupted frag_list
Root cause in skb_segment():
The check at line ~4891:
if (hsize <= 0 && i >= nfrags && skb_headlen(list_skb) &&
(skb_headlen(list_skb) == len || sg)) {
When frag_list is corrupted by double aggregation, when list_skb is
a NULL pointer from skb->next, skb_headlen(list_skb) dereference
NULL/corrupted pointers occurs.
Call Trace:
skb_headlen(NULL skb)
skb_segment
tcp_gso_segment
tcp4_gso_segment
inet_gso_segment
skb_mac_gso_segment
__skb_gso_segment
skb_gso_segment
validate_xmit_skb
validate_xmit_skb_list
sch_direct_xmit
qdisc_restart
__qdisc_run
qdisc_run
net_tx_action
Fix: Add NAPI_GRO_CB(skb)->flush validation to the early-return check in
skb_gro_receive_list(), matching the defensive programming pattern of
skb_gro_receive().
Fixes: 3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.")
Cc: stable@vger.kernel.org
Signed-off-by: Shiming Cheng <shiming.cheng@mediatek.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260709014704.3625-1-shiming.cheng@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
