summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2021-08-27mptcp: optimize the input options processingPaolo Abeni1-34/+37
Most MPTCP packets carries a single MPTCP subption: the DSS containing the mapping for the current packet. Check explicitly for the above, so that is such scenario we replace most conditional statements with a single likely() one. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27mptcp: consolidate in_opt sub-options fields in a bitmaskPaolo Abeni4-73/+63
This makes input options processing more consistent with output ones and will simplify the next patch. Also avoid clearing the suboption field after processing it, since it's not needed. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27mptcp: better binary layout for mptcp_options_receivedPaolo Abeni2-15/+13
This change reorder the mptcp_options_received fields to shrink the structure a bit and to ensure the most frequently used fields are all in the first cacheline. Sub-opt specific flags are moved out of the suboptions area, and we must now explicitly set them when the relevant suboption is parsed. There is a notable exception: 'csum_reqd' is used by both DSS and MPC suboptions, and keeping such field in the suboptions flag area will simplfy the next patch. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27mptcp: do not set unconditionally csum_reqd on incoming optPaolo Abeni1-3/+1
Should be set only if the ingress packets present it, otherwise we can confuse csum validation. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27tcp: enable mid stream window clampNeil Spring1-0/+1
The TCP_WINDOW_CLAMP socket option is defined in tcp(7) to "Bound the size of the advertised window to this value." Window clamping is distributed across two variables, window_clamp ("Maximal window to advertise" in tcp.h) and rcv_ssthresh ("Current window clamp"). This patch updates the function where the window clamp is set to also reduce the current window clamp, rcv_sshthresh, if needed. With this, setting the TCP_WINDOW_CLAMP option has the documented effect of limiting the window. Signed-off-by: Neil Spring <ntspring@fb.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210825210117.1668371-1-ntspring@fb.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski11-39/+48
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26Merge tag 'nfsd-5.14-1' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-1/+2
Pull nfsd fix from Bruce Fields: "This is a one-liner fix for a serious bug that can cause the server to become unresponsive to a client, so I think it's worth the last-minute inclusion for 5.14" * tag 'nfsd-5.14-1' of git://linux-nfs.org/~bfields/linux: SUNRPC: Fix XPT_BUSY flag leakage in svc_handle_xprt()...
2021-08-26Revert "net: really fix the build..."Kalle Valo1-15/+1
This reverts commit ce78ffa3ef1681065ba451cfd545da6126f5ca88. Wren and Nicolas reported that ath11k was failing to initialise QCA6390 Wi-Fi 6 device with error: qcom_mhi_qrtr: probe of mhi0_IPCR failed with error -22 Commit ce78ffa3ef16 ("net: really fix the build..."), introduced in v5.14-rc5, caused this regression in qrtr. Most likely all ath11k devices are broken, but I only tested QCA6390. Let's revert the broken commit so that ath11k works again. Reported-by: Wren Turkal <wt@penguintechs.org> Reported-by: Nicolas Schichan <nschichan@freebox.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210826172816.24478-1-kvalo@codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26net: fix NULL pointer reference in cipso_v4_doi_free王贇1-8/+10
In netlbl_cipsov4_add_std() when 'doi_def->map.std' alloc failed, we sometime observe panic: BUG: kernel NULL pointer dereference, address: ... RIP: 0010:cipso_v4_doi_free+0x3a/0x80 ... Call Trace: netlbl_cipsov4_add_std+0xf4/0x8c0 netlbl_cipsov4_add+0x13f/0x1b0 genl_family_rcv_msg_doit.isra.15+0x132/0x170 genl_rcv_msg+0x125/0x240 This is because in cipso_v4_doi_free() there is no check on 'doi_def->map.std' when 'doi_def->type' equal 1, which is possibe, since netlbl_cipsov4_add_std() haven't initialize it before alloc 'doi_def->map.std'. This patch just add the check to prevent panic happen for similar cases. Reported-by: Abaci <abaci@linux.alibaba.com> Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26rtnetlink: Return correct error on changing device netnsAndrey Ignatov1-1/+2
Currently when device is moved between network namespaces using RTM_NEWLINK message type and one of netns attributes (FLA_NET_NS_PID, IFLA_NET_NS_FD, IFLA_TARGET_NETNSID) but w/o specifying IFLA_IFNAME, and target namespace already has device with same name, userspace will get EINVAL what is confusing and makes debugging harder. Fix it so that userspace gets more appropriate EEXIST instead what makes debugging much easier. Before: # ./ifname.sh + ip netns add ns0 + ip netns exec ns0 ip link add l0 type dummy + ip netns exec ns0 ip link show l0 8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 66:90:b5:d5:78:69 brd ff:ff:ff:ff:ff:ff + ip link add l0 type dummy + ip link show l0 10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 6e:c6:1f:15:20:8d brd ff:ff:ff:ff:ff:ff + ip link set l0 netns ns0 RTNETLINK answers: Invalid argument After: # ./ifname.sh + ip netns add ns0 + ip netns exec ns0 ip link add l0 type dummy + ip netns exec ns0 ip link show l0 8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 1e:4a:72:e3:e3:8f brd ff:ff:ff:ff:ff:ff + ip link add l0 type dummy + ip link show l0 10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether f2:fc:fe:2b:7d:a6 brd ff:ff:ff:ff:ff:ff + ip link set l0 netns ns0 RTNETLINK answers: File exists The problem is that do_setlink() passes its `char *ifname` argument, that it gets from a caller, to __dev_change_net_namespace() as is (as `const char *pat`), but semantics of ifname and pat can be different. For example, __rtnl_newlink() does this: net/core/rtnetlink.c 3270 char ifname[IFNAMSIZ]; ... 3286 if (tb[IFLA_IFNAME]) 3287 nla_strscpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ); 3288 else 3289 ifname[0] = '\0'; ... 3364 if (dev) { ... 3394 return do_setlink(skb, dev, ifm, extack, tb, ifname, status); 3395 } , i.e. do_setlink() gets ifname pointer that is always valid no matter if user specified IFLA_IFNAME or not and then do_setlink() passes this ifname pointer as is to __dev_change_net_namespace() as pat argument. But the pat (pattern) in __dev_change_net_namespace() is used as: net/core/dev.c 11198 err = -EEXIST; 11199 if (__dev_get_by_name(net, dev->name)) { 11200 /* We get here if we can't use the current device name */ 11201 if (!pat) 11202 goto out; 11203 err = dev_get_valid_name(net, dev, pat); 11204 if (err < 0) 11205 goto out; 11206 } As the result the `goto out` path on line 11202 is neven taken and instead of returning EEXIST defined on line 11198, __dev_change_net_namespace() returns an error from dev_get_valid_name() and this, in turn, will be EINVAL for ifname[0] = '\0' set earlier. Fixes: d8a5ec672768 ("[NET]: netlink support for moving devices between network namespaces.") Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26Merge tag 'mac80211-next-for-net-next-2021-08-26' of ↵David S. Miller9-3/+441
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== A few more things: * Use correct DFS domain for self-managed devices * some preparations for transmit power element handling and other 6 GHz regulatory handling * TWT support in AP mode in mac80211 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26sock: remove one redundant SKB_FRAG_PAGE_ORDER macroYunsheng Lin1-1/+0
Both SKB_FRAG_PAGE_ORDER are defined to the same value in net/core/sock.c and drivers/vhost/net.c. Move the SKB_FRAG_PAGE_ORDER definition to net/core/sock.h, as both net/core/sock.c and drivers/vhost/net.c include it, and it seems a reasonable file to put the macro. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26ipv4: use siphash instead of Jenkins in fnhe_hashfun()Eric Dumazet1-6/+6
A group of security researchers brought to our attention the weakness of hash function used in fnhe_hashfun(). Lets use siphash instead of Jenkins Hash, to considerably reduce security risks. Also remove the inline keyword, this really is distracting. Fixes: d546c621542d ("ipv4: harden fnhe_hashfun()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Keyu Man <kman001@ucr.edu> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26ipv6: use siphash in rt6_exception_hash()Eric Dumazet1-6/+14
A group of security researchers brought to our attention the weakness of hash function used in rt6_exception_hash() Lets use siphash instead of Jenkins Hash, to considerably reduce security risks. Following patch deals with IPv4. Fixes: 35732d01fe31 ("ipv6: introduce a hash table to store dst cache") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Keyu Man <kman001@ucr.edu> Cc: Wei Wang <weiwan@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26cfg80211: use wiphy DFS domain if it is self-managedSriram R1-1/+8
Currently during CAC start or other radar events, the DFS domain is fetched from cfg based on global DFS domain, even if the wiphy regdomain disagrees. But this could be different in case of self managed wiphy's in case the self managed driver updates its database or supports regions which has DFS domain set to UNSET in cfg80211 local regdomain. So for explicitly self-managed wiphys, just use their DFS domain. Signed-off-by: Sriram R <srirrama@codeaurora.org> Link: https://lore.kernel.org/r/1629934730-16388-1-git-send-email-srirrama@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-08-26mac80211: parse transmit power envelope elementWen Gong2-0/+15
Parse and store the transmit power envelope element. Signed-off-by: Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/20210820122041.12157-8-wgong@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-08-25SUNRPC: Fix XPT_BUSY flag leakage in svc_handle_xprt()...Trond Myklebust1-1/+2
If the attempt to reserve a slot fails, we currently leak the XPT_BUSY flag on the socket. Among other things, this make it impossible to close the socket. Fixes: 82011c80b3ec ("SUNRPC: Move svc_xprt_received() call sites") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2021-08-25net/sched: ets: fix crash when flipping from 'strict' to 'quantum'Davide Caratti1-0/+7
While running kselftests, Hangbin observed that sch_ets.sh often crashes, and splats like the following one are seen in the output of 'dmesg': BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 159f12067 P4D 159f12067 PUD 159f13067 PMD 0 Oops: 0000 [#1] SMP NOPTI CPU: 2 PID: 921 Comm: tc Not tainted 5.14.0-rc6+ #458 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:__list_del_entry_valid+0x2d/0x50 Code: 48 8b 57 08 48 b9 00 01 00 00 00 00 ad de 48 39 c8 0f 84 ac 6e 5b 00 48 b9 22 01 00 00 00 00 ad de 48 39 ca 0f 84 cf 6e 5b 00 <48> 8b 32 48 39 fe 0f 85 af 6e 5b 00 48 8b 50 08 48 39 f2 0f 85 94 RSP: 0018:ffffb2da005c3890 EFLAGS: 00010217 RAX: 0000000000000000 RBX: ffff9073ba23f800 RCX: dead000000000122 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff9073ba23fbc8 RBP: ffff9073ba23f890 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: dead000000000100 R13: ffff9073ba23fb00 R14: 0000000000000002 R15: 0000000000000002 FS: 00007f93e5564e40(0000) GS:ffff9073bba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000014ad34000 CR4: 0000000000350ee0 Call Trace: ets_qdisc_reset+0x6e/0x100 [sch_ets] qdisc_reset+0x49/0x1d0 tbf_reset+0x15/0x60 [sch_tbf] qdisc_reset+0x49/0x1d0 dev_reset_queue.constprop.42+0x2f/0x90 dev_deactivate_many+0x1d3/0x3d0 dev_deactivate+0x56/0x90 qdisc_graft+0x47e/0x5a0 tc_get_qdisc+0x1db/0x3e0 rtnetlink_rcv_msg+0x164/0x4c0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1a5/0x280 netlink_sendmsg+0x242/0x480 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1f2/0x260 ___sys_sendmsg+0x7c/0xc0 __sys_sendmsg+0x57/0xa0 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f93e44b8338 Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55 RSP: 002b:00007ffc0db737a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000061255c06 RCX: 00007f93e44b8338 RDX: 0000000000000000 RSI: 00007ffc0db73810 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 000000000000000b R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000687880 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt iTCO_vendor_support intel_rapl_msr intel_rapl_common joydev i2c_i801 pcspkr i2c_smbus lpc_ich virtio_balloon ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel ahci libahci ghash_clmulni_intel libata serio_raw virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 When the change() function decreases the value of 'nstrict', we must take into account that packets might be already enqueued on a class that flips from 'strict' to 'quantum': otherwise that class will not be added to the bandwidth-sharing list. Then, a call to ets_qdisc_reset() will attempt to do list_del(&alist) with 'alist' filled with zero, hence the NULL pointer dereference. For classes flipping from 'strict' to 'quantum', initialize an empty list and eventually add it to the bandwidth-sharing list, if there are packets already enqueued. In this way, the kernel will: a) prevent crashing as described above. b) avoid retaining the backlog packets (for an arbitrarily long time) in case no packet is enqueued after a change from 'strict' to 'quantum'. Reported-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: dcc68b4d8084 ("net: sch_ets: Add a new Qdisc") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25net: dsa: tag_sja1105: stop asking the sja1105 driver in sja1105_xmit_tpidVladimir Oltean1-4/+34
Introduced in commit 38b5beeae7a4 ("net: dsa: sja1105: prepare tagger for handling DSA tags and VLAN simultaneously"), the sja1105_xmit_tpid function solved quite a different problem than our needs are now. Then, we used best-effort VLAN filtering and we were using the xmit_tpid to tunnel packets coming from an 8021q upper through the TX VLAN allocated by tag_8021q to that egress port. The need for a different VLAN protocol depending on switch revision came from the fact that this in itself was more of a hack to trick the hardware into accepting tunneled VLANs in the first place. Right now, we deny 8021q uppers (see sja1105_prechangeupper). Even if we supported them again, we would not do that using the same method of {tunneling the VLAN on egress, retagging the VLAN on ingress} that we had in the best-effort VLAN filtering mode. It seems rather simpler that we just allocate a VLAN in the VLAN table that is simply not used by the bridge at all, or by any other port. Anyway, I have 2 gripes with the current sja1105_xmit_tpid: 1. When sending packets on behalf of a VLAN-aware bridge (with the new TX forwarding offload framework) plus untagged (with the tag_8021q VLAN added by the tagger) packets, we can see that on SJA1105P/Q/R/S and later (which have a qinq_tpid of ETH_P_8021AD), some packets sent through the DSA master have a VLAN protocol of 0x8100 and others of 0x88a8. This is strange and there is no reason for it now. If we have a bridge and are therefore forced to send using that bridge's TPID, we can as well blend with that bridge's VLAN protocol for all packets. 2. The sja1105_xmit_tpid introduces a dependency on the sja1105 driver, because it looks inside dp->priv. It is desirable to keep as much separation between taggers and switch drivers as possible. Now it doesn't do that anymore. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25net: dsa: sja1105: drop untagged packets on the CPU and DSA portsVladimir Oltean1-1/+40
The sja1105 driver is a bit special in its use of VLAN headers as DSA tags. This is because in VLAN-aware mode, the VLAN headers use an actual TPID of 0x8100, which is understood even by the DSA master as an actual VLAN header. Furthermore, control packets such as PTP and STP are transmitted with no VLAN header as a DSA tag, because, depending on switch generation, there are ways to steer these control packets towards a precise egress port other than VLAN tags. Transmitting control packets as untagged means leaving a door open for traffic in general to be transmitted as untagged from the DSA master, and for it to traverse the switch and exit a random switch port according to the FDB lookup. This behavior is a bit out of line with other DSA drivers which have native support for DSA tagging. There, it is to be expected that the switch only accepts DSA-tagged packets on its CPU port, dropping everything that does not match this pattern. We perhaps rely a bit too much on the switches' hardware dropping on the CPU port, and place no other restrictions in the kernel data path to avoid that. For example, sja1105 is also a bit special in that STP/PTP packets are transmitted using "management routes" (sja1105_port_deferred_xmit): when sending a link-local packet from the CPU, we must first write a SPI message to the switch to tell it to expect a packet towards multicast MAC DA 01-80-c2-00-00-0e, and to route it towards port 3 when it gets it. This entry expires as soon as it matches a packet received by the switch, and it needs to be reinstalled for the next packet etc. All in all quite a ghetto mechanism, but it is all that the sja1105 switches offer for injecting a control packet. The driver takes a mutex for serializing control packets and making the pairs of SPI writes of a management route and its associated skb atomic, but to be honest, a mutex is only relevant as long as all parties agree to take it. With the DSA design, it is possible to open an AF_PACKET socket on the DSA master net device, and blast packets towards 01-80-c2-00-00-0e, and whatever locking the DSA switch driver might use, it all goes kaput because management routes installed by the driver will match skbs sent by the DSA master, and not skbs generated by the driver itself. So they will end up being routed on the wrong port. So through the lens of that, maybe it would make sense to avoid that from happening by doing something in the network stack, like: introduce a new bit in struct sk_buff, like xmit_from_dsa. Then, somewhere around dev_hard_start_xmit(), introduce the following check: if (netdev_uses_dsa(dev) && !skb->xmit_from_dsa) kfree_skb(skb); Ok, maybe that is a bit drastic, but that would at least prevent a bunch of problems. For example, right now, even though the majority of DSA switches drop packets without DSA tags sent by the DSA master (and therefore the majority of garbage that user space daemons like avahi and udhcpcd and friends create), it is still conceivable that an aggressive user space program can open an AF_PACKET socket and inject a spoofed DSA tag directly on the DSA master. We have no protection against that; the packet will be understood by the switch and be routed wherever user space says. Furthermore: there are some DSA switches where we even have register access over Ethernet, using DSA tags. So even user space drivers are possible in this way. This is a huge hole. However, the biggest thing that bothers me is that udhcpcd attempts to ask for an IP address on all interfaces by default, and with sja1105, it will attempt to get a valid IP address on both the DSA master as well as on sja1105 switch ports themselves. So with IP addresses in the same subnet on multiple interfaces, the routing table will be messed up and the system will be unusable for traffic until it is configured manually to not ask for an IP address on the DSA master itself. It turns out that it is possible to avoid that in the sja1105 driver, at least very superficially, by requesting the switch to drop VLAN-untagged packets on the CPU port. With the exception of control packets, all traffic originated from tag_sja1105.c is already VLAN-tagged, so only STP and PTP packets need to be converted. For that, we need to uphold the equivalence between an untagged and a pvid-tagged packet, and to remember that the CPU port of sja1105 uses a pvid of 4095. Now that we drop untagged traffic on the CPU port, non-aggressive user space applications like udhcpcd stop bothering us, and sja1105 effectively becomes just as vulnerable to the aggressive kind of user space programs as other DSA switches are (ok, users can also create 8021q uppers on top of the DSA master in the case of sja1105, but in future patches we can easily deny that, but it still doesn't change the fact that VLAN-tagged packets can still be injected over raw sockets). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25mptcp: add the mibs for MP_FAILGeliang Tang4-0/+6
This patch added the mibs for MP_FAIL: MPTCP_MIB_MPFAILTX and MPTCP_MIB_MPFAILRX. Signed-off-by: Geliang Tang <geliangtang@xiaomi.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25mptcp: send out MP_FAIL when data checksum failsGeliang Tang2-0/+28
When a bad checksum is detected, set the send_mp_fail flag to send out the MP_FAIL option. Add a new function mptcp_has_another_subflow() to check whether there's only a single subflow. When multiple subflows are in use, close the affected subflow with a RST that includes an MP_FAIL option and discard the data with the bad checksum. Set the sk_state of the subsocket to TCP_CLOSE, then the flag MPTCP_WORK_CLOSE_SUBFLOW will be set in subflow_sched_work_if_closed, and the subflow will be closed. When a single subfow is in use, temporarily handled by sending MP_FAIL with a RST too. Signed-off-by: Geliang Tang <geliangtang@xiaomi.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25mptcp: MP_FAIL suboption receivingGeliang Tang3-0/+24
This patch added handling for receiving MP_FAIL suboption. Add a new members mp_fail and fail_seq in struct mptcp_options_received. When MP_FAIL suboption is received, set mp_fail to 1 and save the sequence number to fail_seq. Then invoke mptcp_pm_mp_fail_received to deal with the MP_FAIL suboption. Signed-off-by: Geliang Tang <geliangtang@xiaomi.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25mptcp: MP_FAIL suboption sendingGeliang Tang2-4/+58
This patch added the MP_FAIL suboption sending support. Add a new flag named send_mp_fail in struct mptcp_subflow_context. If this flag is set, send out MP_FAIL suboption. Add a new member fail_seq in struct mptcp_out_options to save the data sequence number to put into the MP_FAIL suboption. An MP_FAIL option could be included in a RST or on the subflow-level ACK. Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@xiaomi.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25mptcp: optimize out option generationPaolo Abeni2-109/+121
Currently we have several protocol constraints on MPTCP options generation (e.g. MPC and MPJ subopt are mutually exclusive) and some additional ones required by our implementation (e.g. almost all ADD_ADDR variant are mutually exclusive with everything else). We can leverage the above to optimize the out option generation: we check DSS/MPC/MPJ presence in a mutually exclusive way, avoiding many unneeded conditionals in the common cases. Additionally extend the existing constraints on ADD_ADDR opt on all subvariants, so that it becomes fully mutually exclusive with the above and we can skip another conditional statement for the common case. This change is also needed by the next patch. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25net-next: When a bond have a massive amount of VLANs with IPv6 addresses, ↵Gilad Naaman1-46/+98
performance of changing link state, attaching a VRF, changing an IPv6 address, etc. go down dramtically. The source of most of the slow down is the `dev_addr_lists.c` module, which mainatins a linked list of HW addresses. When using IPv6, this list grows for each IPv6 address added on a VLAN, since each IPv6 address has a multicast HW address associated with it. When performing any modification to the involved links, this list is traversed many times, often for nothing, all while holding the RTNL lock. Instead, this patch adds an auxilliary rbtree which cuts down traversal time significantly. Performance can be seen with the following script: #!/bin/bash ip netns del test || true 2>/dev/null ip netns add test echo 1 | ip netns exec test tee /proc/sys/net/ipv6/conf/all/keep_addr_on_down > /dev/null set -e ip -n test link add foo type veth peer name bar ip -n test link add b1 type bond ip -n test link add florp type vrf table 10 ip -n test link set bar master b1 ip -n test link set foo up ip -n test link set bar up ip -n test link set b1 up ip -n test link set florp up VLAN_COUNT=1500 BASE_DEV=b1 echo Creating vlans ip netns exec test time -p bash -c "for i in \$(seq 1 $VLAN_COUNT); do ip -n test link add link $BASE_DEV name foo.\$i type vlan id \$i; done" echo Bringing them up ip netns exec test time -p bash -c "for i in \$(seq 1 $VLAN_COUNT); do ip -n test link set foo.\$i up; done" echo Assiging IPv6 Addresses ip netns exec test time -p bash -c "for i in \$(seq 1 $VLAN_COUNT); do ip -n test address add dev foo.\$i 2000::\$i/64; done" echo Attaching to VRF ip netns exec test time -p bash -c "for i in \$(seq 1 $VLAN_COUNT); do ip -n test link set foo.\$i master florp; done" On an Intel(R) Xeon(R) CPU E5-2650 v3 @ 2.30GHz machine, the performance before the patch is (truncated): Creating vlans real 108.35 Bringing them up real 4.96 Assiging IPv6 Addresses real 19.22 Attaching to VRF real 458.84 After the patch: Creating vlans real 5.59 Bringing them up real 5.07 Assiging IPv6 Addresses real 5.64 Attaching to VRF real 25.37 Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Lu Wei <luwei32@huawei.com> Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Gilad Naaman <gnaaman@drivenets.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25net: bridge: change return type of br_handle_ingress_vlan_tunnelKangmin Park3-16/+11
br_handle_ingress_vlan_tunnel() is only referenced in br_handle_frame(). If br_handle_ingress_vlan_tunnel() is called and return non-zero value, goto drop in br_handle_frame(). But, br_handle_ingress_vlan_tunnel() always return 0. So, the routines that check the return value and goto drop has no meaning. Therefore, change return type of br_handle_ingress_vlan_tunnel() to void and remove if statement of br_handle_frame(). Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20210823102118.17966-1-l4stpr0gr4m@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo2-6/+19
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24ethtool: add two coalesce attributes for CQE modeYufeng Mo2-3/+18
Currently, there are many drivers who support CQE mode configuration, some configure it as a fixed when initialized, some provide an interface to change it by ethtool private flags. In order to make it more generic, add two new 'ETHTOOL_A_COALESCE_USE_CQE_TX' and 'ETHTOOL_A_COALESCE_USE_CQE_RX' coalesce attributes, then these parameters can be accessed by ethtool netlink coalesce uAPI. Also add an new structure kernel_ethtool_coalesce, then the new parameter can be added into this struct. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24page_pool: use relaxed atomic for release side accountingYunsheng Lin1-1/+1
There is no need to synchronize the account updating, so use the relaxed atomic to avoid some memory barrier in the data path. Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24ipv6: correct comments about fib6_node sernumzhang kai1-1/+1
correct comments in set and get fn_sernum Signed-off-by: zhang kai <zhangkaiheb@126.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24net: dsa: let drivers state that they need VLAN filtering while standaloneVladimir Oltean2-9/+24
As explained in commit e358bef7c392 ("net: dsa: Give drivers the chance to veto certain upper devices"), the hellcreek driver uses some tricks to comply with the network stack expectations: it enforces port separation in standalone mode using VLANs. For untagged traffic, bridging between ports is prevented by using different PVIDs, and for VLAN-tagged traffic, it never accepts 8021q uppers with the same VID on two ports, so packets with one VLAN cannot leak from one port to another. That is almost fine*, and has worked because hellcreek relied on an implicit behavior of the DSA core that was changed by the previous patch: the standalone ports declare the 'rx-vlan-filter' feature as 'on [fixed]'. Since most of the DSA drivers are actually VLAN-unaware in standalone mode, that feature was actually incorrectly reflecting the hardware/driver state, so there was a desire to fix it. This leaves the hellcreek driver in a situation where it has to explicitly request this behavior from the DSA framework. We configure the ports as follows: - Standalone: 'rx-vlan-filter' is on. An 8021q upper on top of a standalone hellcreek port will go through dsa_slave_vlan_rx_add_vid and will add a VLAN to the hardware tables, giving the driver the opportunity to refuse it through .port_prechangeupper. - Bridged with vlan_filtering=0: 'rx-vlan-filter' is off. An 8021q upper on top of a bridged hellcreek port will not go through dsa_slave_vlan_rx_add_vid, because there will not be any attempt to offload this VLAN. The driver already disables VLAN awareness, so that upper should receive the traffic it needs. - Bridged with vlan_filtering=1: 'rx-vlan-filter' is on. An 8021q upper on top of a bridged hellcreek port will call dsa_slave_vlan_rx_add_vid, and can again be vetoed through .port_prechangeupper. *It is not actually completely fine, because if I follow through correctly, we can have the following situation: ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 # lan0 now becomes VLAN-unaware ip link set lan0 nomaster # lan0 fails to become VLAN-aware again, therefore breaking isolation This patch fixes that corner case by extending the DSA core logic, based on this requested attribute, to change the VLAN awareness state of the switch (port) when it leaves the bridge. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24net: dsa: don't advertise 'rx-vlan-filter' when not neededVladimir Oltean3-5/+111
There have been multiple independent reports about dsa_slave_vlan_rx_add_vid being called (and consequently calling the drivers' .port_vlan_add) when it isn't needed, and sometimes (not always) causing problems in the process. Case 1: mv88e6xxx_port_vlan_prepare is stubborn and only accepts VLANs on bridged ports. That is understandably so, because standalone mv88e6xxx ports are VLAN-unaware, and VTU entries are said to be a scarce resource. Otherwise said, the following fails lamentably on mv88e6xxx: ip link add br0 type bridge vlan_filtering 1 ip link set lan3 master br0 ip link add link lan10 name lan10.1 type vlan id 1 [485256.724147] mv88e6085 d0032004.mdio-mii:12: p10: hw VLAN 1 already used by port 3 in br0 RTNETLINK answers: Operation not supported This has become a worse issue since commit 9b236d2a69da ("net: dsa: Advertise the VLAN offload netdev ability only if switch supports it"). Up to that point, the driver was returning -EOPNOTSUPP and DSA was reconverting that error to 0, making the 8021q upper think all is ok (but obviously the error message was there even prior to this change). After that change the -EOPNOTSUPP is propagated to vlan_vid_add, and it is a hard error. Case 2: Ports that don't offload the Linux bridge (have a dp->bridge_dev = NULL because they don't implement .port_bridge_{join,leave}). Understandably, a standalone port should not offload VLANs either, it should remain VLAN unaware and any VLAN should be a software VLAN (as long as the hardware is not quirky, that is). In fact, dsa_slave_port_obj_add does do the right thing and rejects switchdev VLAN objects coming from the bridge when that bridge is not offloaded: case SWITCHDEV_OBJ_ID_PORT_VLAN: if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev)) return -EOPNOTSUPP; err = dsa_slave_vlan_add(dev, obj, extack); But it seems that the bridge is able to trick us. The __vlan_vid_add from br_vlan.c has: /* Try switchdev op first. In case it is not supported, fallback to * 8021q add. */ err = br_switchdev_port_vlan_add(dev, v->vid, flags, extack); if (err == -EOPNOTSUPP) return vlan_vid_add(dev, br->vlan_proto, v->vid); So it says "no, no, you need this VLAN in your life!". And we, naive as we are, say "oh, this comes from the vlan_vid_add code path, it must be an 8021q upper, sure, I'll take that". And we end up with that bridge VLAN installed on our port anyway. But this time, it has the wrong flags: if the bridge was trying to install VLAN 1 as a pvid/untagged VLAN, failed via switchdev, retried via vlan_vid_add, we have this comment: /* This API only allows programming tagged, non-PVID VIDs */ So what we do makes absolutely no sense. Backtracing a bit, we see the common pattern. We allow the network stack to think that our standalone ports are VLAN-aware, but they aren't, for the vast majority of switches. The quirky ones should not dictate the norm. The dsa_slave_vlan_rx_add_vid and dsa_slave_vlan_rx_kill_vid methods exist for drivers that need the 'rx-vlan-filter: on' feature in ethtool -k, which can be due to any of the following reasons: 1. vlan_filtering_is_global = true, and some ports are under a VLAN-aware bridge while others are standalone, and the standalone ports would otherwise drop VLAN-tagged traffic. This is described in commit 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation"). 2. the ports that are under a VLAN-aware bridge should also set this feature, for 8021q uppers having a VID not claimed by the bridge. In this case, the driver will essentially not even know that the VID is coming from the 8021q layer and not the bridge. 3. Hellcreek. This driver needs it because in standalone mode, it uses unique VLANs per port to ensure separation. For separation of untagged traffic, it uses different PVIDs for each port, and for separation of VLAN-tagged traffic, it never accepts 8021q uppers with the same vid on two ports. If a driver does not fall under any of the above 3 categories, there is no reason why it should advertise the 'rx-vlan-filter' feature, therefore no reason why it should offload the VLANs added through vlan_vid_add. This commit fixes the problem by removing the 'rx-vlan-filter' feature from the slave devices when they operate in standalone mode, and when they offload a VLAN-unaware bridge. The way it works is that vlan_vid_add will now stop its processing here: vlan_add_rx_filter_info: if (!vlan_hw_filter_capable(dev, proto)) return 0; So the VLAN will still be saved in the interface's VLAN RX filtering list, but because it does not declare VLAN filtering in its features, the 8021q module will return zero without committing that VLAN to hardware. This gives the drivers what they want, since it keeps the 8021q VLANs away from the VLAN table until VLAN awareness is enabled (point at which the ports are no longer standalone, hence in the mv88e6xxx case, the check in mv88e6xxx_port_vlan_prepare passes). Since the issue predates the existence of the hellcreek driver, case 3 will be dealt with in a separate patch. The main change that this patch makes is to no longer set NETIF_F_HW_VLAN_CTAG_FILTER unconditionally, but toggle it dynamically (for most switches, never). The second part of the patch addresses an issue that the first part introduces: because the 'rx-vlan-filter' feature is now dynamically toggled, and our .ndo_vlan_rx_add_vid does not get called when 'rx-vlan-filter' is off, we need to avoid bugs such as the following by replaying the VLANs from 8021q uppers every time we enable VLAN filtering: ip link add link lan0 name lan0.100 type vlan id 100 ip addr add 192.168.100.1/24 dev lan0.100 ping 192.168.100.2 # should work ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 ping 192.168.100.2 # should still work ip link set br0 type bridge vlan_filtering 1 ping 192.168.100.2 # should still work but doesn't As reported by Florian, some drivers look at ds->vlan_filtering in their .port_vlan_add() implementation. So this patch also makes sure that ds->vlan_filtering is committed before calling the driver. This is the reason why it is first committed, then restored on the failure path. Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24net: dsa: properly fall back to software bridgingVladimir Oltean2-2/+9
If the driver does not implement .port_bridge_{join,leave}, then we must fall back to standalone operation on that port, and trigger the error path of dsa_port_bridge_join. This sets dp->bridge_dev = NULL. In turn, having a non-NULL dp->bridge_dev when there is no offloading support makes the following things go wrong: - dsa_default_offload_fwd_mark make the wrong decision in setting skb->offload_fwd_mark. It should set skb->offload_fwd_mark = 0 for ports that don't offload the bridge, which should instruct the bridge to forward in software. But this does not happen, dp->bridge_dev is incorrectly set to point to the bridge, so the bridge is told that packets have been forwarded in hardware, which they haven't. - switchdev objects (MDBs, VLANs) should not be offloaded by ports that don't offload the bridge. Standalone ports should behave as packet-in, packet-out and the bridge should not be able to manipulate the pvid of the port, or tag stripping on egress, or ingress filtering. This should already work fine because dsa_slave_port_obj_add has: case SWITCHDEV_OBJ_ID_PORT_VLAN: if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev)) return -EOPNOTSUPP; err = dsa_slave_vlan_add(dev, obj, extack); but since dsa_port_offloads_bridge_port works based on dp->bridge_dev, this is again sabotaging us. All the above work in case the port has an unoffloaded LAG interface, so this is well exercised code, we should apply it for plain unoffloaded bridge ports too. Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24net: dsa: don't call switchdev_bridge_port_unoffload for unoffloaded bridge ↵Vladimir Oltean1-0/+4
ports For ports that have a NULL dp->bridge_dev, dsa_port_to_bridge_port() also returns NULL as expected. Issue #1 is that we are performing a NULL pointer dereference on brport_dev. Issue #2 is that these are ports on which switchdev_bridge_port_offload has not been called, so we should not call switchdev_bridge_port_unoffload on them either. Both issues are addressed by checking against a NULL brport_dev in dsa_port_pre_bridge_leave and exiting early. Fixes: 2f5dc00f7a3e ("net: bridge: switchdev: let drivers inform which bridge ports are offloaded") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24mac80211: introduce individual TWT support in AP modeLorenzo Bianconi7-2/+418
Introduce TWT action frames parsing support to mac80211. Currently just individual TWT agreement are support in AP mode. Whenever the AP receives a TWT action frame from an associated client, after performing sanity checks, it will notify the underlay driver with requested parameters in order to check if they are supported and if there is enough room for a new agreement. The driver is expected to set the agreement result and report it to mac80211. Drivers supporting this have two new callbacks: - add_twt_setup (mandatory) - twt_teardown_request (optional) mac80211 will send an action frame reply according to the result reported by the driver. Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/257512f2e22ba42b9f2624942a128dd8f141de4b.1629741512.git.lorenzo@kernel.org [use le16p_replace_bits(), minor cleanups, use (void *) casts, fix to use ieee80211_get_he_iftype_cap() correctly] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-08-24mptcp: remove MPTCP_ADD_ADDR_IPV6 and MPTCP_ADD_ADDR_PORTYonglong Li3-21/+3
MPTCP_ADD_ADDR_IPV6 and MPTCP_ADD_ADDR_PORT are not necessary, we can get these info from pm.local or pm.remote. Drop mptcp_pm_should_add_signal_ipv6 and mptcp_pm_should_add_signal_port too. Co-developed-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24mptcp: build ADD_ADDR/echo-ADD_ADDR option according pm.add_signalYonglong Li2-6/+10
According to the MPTCP_ADD_ADDR_SIGNAL or MPTCP_ADD_ADDR_ECHO flag, build the ADD_ADDR/ADD_ADDR_ECHO option. In mptcp_pm_add_addr_signal(), use opts->addr to save the announced ADD_ADDR or ADD_ADDR_ECHO address. Co-developed-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24mptcp: fix ADD_ADDR and RM_ADDR maybe flush addr_signal each otherYonglong Li1-3/+10
ADD_ADDR shares pm.addr_signal with RM_ADDR, so after RM_ADDR/ADD_ADDR has done, we should not clean ADD_ADDR/RM_ADDR's addr_signal. Co-developed-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24mptcp: make MPTCP_ADD_ADDR_SIGNAL and MPTCP_ADD_ADDR_ECHO separateYonglong Li3-8/+18
Use MPTCP_ADD_ADDR_SIGNAL only for the action of sending ADD_ADDR, and use MPTCP_ADD_ADDR_ECHO only for the action of sending ADD_ADDR echo. Use msk->pm.local to save the announced ADD_ADDR address only, and reuse msk->pm.remote to save the announced ADD_ADDR_ECHO address. To prepare for the next patch. Co-developed-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24mptcp: move drop_other_suboptions check under pm lockYonglong Li3-18/+31
This patch moved the drop_other_suboptions check from mptcp_established_options_add_addr() into mptcp_pm_add_addr_signal(), do it under the PM lock to avoid the race between this check and mptcp_pm_add_addr_signal(). For this, added a new parameter for mptcp_pm_add_addr_signal() to get the drop_other_suboptions value. And drop the other suboptions after the option length check if drop_other_suboptions is true. Additionally, always drop the other suboption for TCP pure ack: that makes both the code simpler and the MPTCP behaviour more consistent. Co-developed-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24net: ipv4: Move ip_options_fragment() out of loopYajun Deng1-15/+4
The ip_options_fragment() only called when iter->offset is equal to zero, so move it out of loop, and inline 'Copy the flags to each fragment.' As also, remove the unused parameter in ip_frag_ipcb(). Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23net: dsa: track unique bridge numbers across all DSA switch treesVladimir Oltean3-34/+55
Right now, cross-tree bridging setups work somewhat by mistake. In the case of cross-tree bridging with sja1105, all switch instances need to agree upon a common VLAN ID for forwarding a packet that belongs to a certain bridging domain. With TX forwarding offload, the VLAN ID is the bridge VLAN for VLAN-aware bridging, and the tag_8021q TX forwarding offload VID (a VLAN which has non-zero VBID bits) for VLAN-unaware bridging. The VBID for VLAN-unaware bridging is derived from the dp->bridge_num value calculated by DSA independently for each switch tree. If ports from one tree join one bridge, and ports from another tree join another bridge, DSA will assign them the same bridge_num, even though the bridges are different. If cross-tree bridging is supported, this is an issue. Modify DSA to calculate the bridge_num globally across all switch trees. This has the implication for a driver that the dp->bridge_num value that DSA will assign to its ports might not be contiguous, if there are boards with multiple DSA drivers instantiated. Additionally, all bridge_num values eat up towards each switch's ds->num_fwd_offloading_bridges maximum, which is potentially unfortunate, and can be seen as a limitation introduced by this patch. However, that is the lesser evil for now. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-22ip6_gre: add validation for csum_startShreyansh Chouhan1-0/+2
Validate csum_start in gre_handle_offloads before we call _gre_xmit so that we do not crash later when the csum_start value is used in the lco_csum function call. This patch deals with ipv6 code. Fixes: Fixes: b05229f44228 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") Reported-by: syzbot+ff8e1b9f2f36481e2efc@syzkaller.appspotmail.com Signed-off-by: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-22ip_gre: add validation for csum_startShreyansh Chouhan1-0/+2
Validate csum_start in gre_handle_offloads before we call _gre_xmit so that we do not crash later when the csum_start value is used in the lco_csum function call. This patch deals with ipv4 code. Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.") Reported-by: syzbot+ff8e1b9f2f36481e2efc@syzkaller.appspotmail.com Signed-off-by: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20Merge tag 'mac80211-next-for-net-next-2021-08-20' of ↵Jakub Kicinski13-63/+518
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Minor updates: * BSS coloring support * MEI commands for Intel platforms * various fixes/cleanups * tag 'mac80211-next-for-net-next-2021-08-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: cfg80211: fix BSS color notify trace enum confusion mac80211: Fix insufficient headroom issue for AMSDU mac80211: add support for BSS color change nl80211: add support for BSS coloring mac80211: Use flex-array for radiotap header bitmap mac80211: radiotap: Use BIT() instead of shifts mac80211: Remove unnecessary variable and label mac80211: include <linux/rbtree.h> mac80211: Fix monitor MTU limit so that A-MSDUs get through mac80211: remove unnecessary NULL check in ieee80211_register_hw() mac80211: Reject zero MAC address in sta_info_insert_check() nl80211: vendor-cmd: add Intel vendor commands for iwlmei usage ==================== Link: https://lore.kernel.org/r/20210820105329.48674-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-20net: bridge: vlan: convert mcast router global option to per-vlan entryNikolay Aleksandrov4-18/+62
The per-vlan router option controls the port/vlan and host vlan entries' mcast router config. The global option controlled only the host vlan config, but that is unnecessary and incosistent as it's not really a global vlan option, but rather bridge option to control host router config, so convert BRIDGE_VLANDB_GOPTS_MCAST_ROUTER to BRIDGE_VLANDB_ENTRY_MCAST_ROUTER which can be used to control both host vlan and port vlan mcast router config. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20net: bridge: mcast: br_multicast_set_port_router takes multicast context as ↵Nikolay Aleksandrov4-8/+11
argument Change br_multicast_set_port_router to take port multicast context as its first argument so we can later use it to control port/vlan mcast router option. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20net: qrtr: fix another OOB Read in qrtr_endpoint_postXiaolong Huang1-1/+1
This check was incomplete, did not consider size is 0: if (len != ALIGN(size, 4) + hdrlen) goto err; if size from qrtr_hdr is 0, the result of ALIGN(size, 4) will be 0, In case of len == hdrlen and size == 0 in header this check won't fail and if (cb->type == QRTR_TYPE_NEW_SERVER) { /* Remote node endpoint can bridge other distant nodes */ const struct qrtr_ctrl_pkt *pkt = data + hdrlen; qrtr_node_assign(node, le32_to_cpu(pkt->server.node)); } will also read out of bound from data, which is hdrlen allocated block. Fixes: 194ccc88297a ("net: qrtr: Support decoding incoming v2 packets") Fixes: ad9d24c9429e ("net: qrtr: fix OOB Read in qrtr_endpoint_post") Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20Merge tag 'for-net-next-2021-08-19' of ↵David S. Miller9-180/+298
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - Add support for Foxconn Mediatek Chip - Add support for LG LGSBWAC92/TWCM-K505D - hci_h5 flow control fixes and suspend support - Switch to use lock_sock for SCO and RFCOMM - Various fixes for extended advertising - Reword Intel's setup on btusb unifying the supported generations ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-03 02:23:41 +0300