summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2021-01-09Bluetooth: Fix attempting to set RPA timeout when unsupportedEdward Vear1-1/+1
commit a31489d2a368d2f9225ed6a6f595c63bc7d10de8 upstream. During controller initialization, an LE Set RPA Timeout command is sent to the controller if supported. However, the value checked to determine if the command is supported is incorrect. Page 1921 of the Bluetooth Core Spec v5.2 shows that bit 2 of octet 35 of the Supported_Commands field corresponds to the LE Set RPA Timeout command, but currently bit 6 of octet 35 is checked. This patch checks the correct value instead. This issue led to the error seen in the following btmon output during initialization of an adapter (rtl8761b) and prevented initialization from completing. < HCI Command: LE Set Resolvable Private Address Timeout (0x08|0x002e) plen 2 Timeout: 900 seconds > HCI Event: Command Complete (0x0e) plen 4 LE Set Resolvable Private Address Timeout (0x08|0x002e) ncmd 2 Status: Unsupported Remote Feature / Unsupported LMP Feature (0x1a) = Close Index: 00:E0:4C:6B:E5:03 The error did not appear when running with this patch. Signed-off-by: Edward Vear <edwardvear@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-06ethtool: fix string set id checkMichal Kubecek1-1/+1
[ Upstream commit efb796f5571f030743e1d9c662cdebdad724f8c5 ] Syzbot reported a shift of a u32 by more than 31 in strset_parse_request() which is undefined behavior. This is caused by range check of string set id using variable ret (which is always 0 at this point) instead of id (string set id from request). Fixes: 71921690f974 ("ethtool: provide string sets with STRSET_GET request") Reported-by: syzbot+96523fb438937cd01220@syzkaller.appspotmail.com Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/r/b54ed5c5fd972a59afea3e1badfb36d86df68799.1607952208.git.mkubecek@suse.cz Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-06ethtool: fix error paths in ethnl_set_channels()Ivan Vecera1-2/+4
[ Upstream commit ef72cd3c5ce168829c6684ecb2cae047d3493690 ] Fix two error paths in ethnl_set_channels() to avoid lock-up caused but unreleased RTNL. Fixes: e19c591eafad ("ethtool: set device channel counts with CHANNELS_SET request") Reported-by: LiLiang <liali@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/r/20201215090810.801777-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-06mptcp: fix security context on server socketPaolo Abeni1-0/+2
[ Upstream commit 0c14846032f2c0a3b63234e1fc2759f4155b6067 ] Currently MPTCP is not propagating the security context from the ingress request socket to newly created msk at clone time. Address the issue invoking the missing security helper. Fixes: cf7da0d66cc1 ("mptcp: Create SUBFLOW socket for incoming connections") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-06net/sched: sch_taprio: reset child qdiscs before freeing themDavide Caratti1-1/+16
[ Upstream commit 44d4775ca51805b376a8db5b34f650434a08e556 ] syzkaller shows that packets can still be dequeued while taprio_destroy() is running. Let sch_taprio use the reset() function to cancel the advance timer and drop all skbs from the child qdiscs. Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Link: https://syzkaller.appspot.com/bug?id=f362872379bf8f0017fb667c1ab158f2d1e764ae Reported-by: syzbot+8971da381fb5a31f542d@syzkaller.appspotmail.com Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/63b6d79b0e830ebb0283e020db4df3cdfdfb2b94.1608142843.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30xprtrdma: Fix XDRBUF_SPARSE_PAGES supportChuck Lever1-9/+31
commit 15261b9126cd5bb2ad8521da49d8f5c042d904c7 upstream. Olga K. observed that rpcrdma_marsh_req() allocates sparse pages only when it has determined that a Reply chunk is necessary. There are plenty of cases where no Reply chunk is needed, but the XDRBUF_SPARSE_PAGES flag is set. The result would be a crash in rpcrdma_inline_fixup() when it tries to copy parts of the received Reply into a missing page. To avoid crashing, handle sparse page allocation up front. Until XATTR support was added, this issue did not appear often because the only SPARSE_PAGES consumer always expected a reply large enough to always require a Reply chunk. Reported-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30sunrpc: fix xs_read_xdr_buf for partial pages receiveDan Aloni1-1/+2
[ Upstream commit ac9645c87380e39a8fa87a1b51721efcdea89dbf ] When receiving pages data, return value 'ret' when positive includes `buf->page_base`, so we should subtract that before it is used for changing `offset` and comparing against `want`. This was discovered on the very rare cases where the server returned a chunk of bytes that when added to the already received amount of bytes for the pages happened to match the current `recv.len`, for example on this case: buf->page_base : 258356 actually received from socket: 1740 ret : 260096 want : 260096 In this case neither of the two 'if ... goto out' trigger, and we continue to tail parsing. Worth to mention that the ensuing EMSGSIZE from the continued execution of `xs_read_xdr_buf` may be observed by an application due to 4 superfluous bytes being added to the pages data. Fixes: 277e4ab7d530 ("SUNRPC: Simplify TCP receive code by switching to using iterators") Signed-off-by: Dan Aloni <dan@kernelim.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30mac80211: fix a mistake check for rx_stats updateWen Gong1-1/+1
[ Upstream commit f879ac8ed6c83ce05fcb53815a8ea83c5b6099a1 ] It should be !is_multicast_ether_addr() in ieee80211_rx_h_sta_process() for the rx_stats update, below commit remove the !, this patch is to change it back. It lead the rx rate "iw wlan0 station dump" become invalid for some scenario when IEEE80211_HW_USES_RSS is set. Fixes: 09a740ce352e ("mac80211: receive and process S1G beacons") Signed-off-by: Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/1607483189-3891-1-git-send-email-wgong@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30mac80211: don't set set TDLS STA bandwidth wider than possibleJohannes Berg1-4/+10
[ Upstream commit f65607cdbc6b0da356ef5a22552ddd9313cf87a0 ] When we set up a TDLS station, we set sta->sta.bandwidth solely based on the capabilities, because the "what's the current bandwidth" check is bypassed and only applied for other types of stations. This leads to the unfortunate scenario that the sta->sta.bandwidth is 160 MHz if both stations support it, but we never actually configure this bandwidth unless the AP is already using 160 MHz; even for wider bandwidth support we only go up to 80 MHz (at least right now.) For iwlwifi, this can also lead to firmware asserts, telling us that we've configured the TX rates for a higher bandwidth than is actually available due to the PHY configuration. For non-TDLS, we check against the interface's requested bandwidth, but we explicitly skip this check for TDLS to cope with the wider BW case. Change this to (a) still limit to the TDLS peer's own chandef, which gets factored into the overall PHY configuration we request from the driver, and (b) limit it to when the TDLS peer is authorized, because it's only factored into the channel context in this case. Fixes: 504871e602d9 ("mac80211: fix bandwidth computation for TDLS peers") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.fcc7d29c4590.I11f77e9e25ddf871a3c8d5604650c763e2c5887a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30Bluetooth: sco: Fix crash when using BT_SNDMTU/BT_RCVMTU optionWei Yongjun1-0/+5
[ Upstream commit f6b8c6b5543983e9de29dc14716bfa4eb3f157c4 ] This commit add the invalid check for connected socket, without it will causes the following crash due to sco_pi(sk)->conn being NULL: KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057] CPU: 3 PID: 4284 Comm: test_sco Not tainted 5.10.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:sco_sock_getsockopt+0x45d/0x8e0 Code: 48 c1 ea 03 80 3c 02 00 0f 85 ca 03 00 00 49 8b 9d f8 04 00 00 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 50 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e b5 03 00 00 8b 43 50 48 8b 0c RSP: 0018:ffff88801bb17d88 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83a4ecdf RDX: 000000000000000a RSI: ffffc90002fce000 RDI: 0000000000000050 RBP: 1ffff11003762fb4 R08: 0000000000000001 R09: ffff88810e1008c0 R10: ffffffffbd695dcf R11: fffffbfff7ad2bb9 R12: 0000000000000000 R13: ffff888018ff1000 R14: dffffc0000000000 R15: 000000000000000d FS: 00007fb4f76c1700(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555e3b7a938 CR3: 00000001117be001 CR4: 0000000000770ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? sco_skb_put_cmsg+0x80/0x80 ? sco_skb_put_cmsg+0x80/0x80 __sys_getsockopt+0x12a/0x220 ? __ia32_sys_setsockopt+0x150/0x150 ? syscall_enter_from_user_mode+0x18/0x50 ? rcu_read_lock_bh_held+0xb0/0xb0 __x64_sys_getsockopt+0xba/0x150 ? syscall_enter_from_user_mode+0x1d/0x50 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 0fc1a726f897 ("Bluetooth: sco: new getsockopt options BT_SNDMTU/BT_RCVMTU") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Luiz Augusto Von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30net: sunrpc: Fix 'snprintf' return value check in 'do_xprt_debugfs'Fedor Tokarev1-2/+2
[ Upstream commit 35a6d396721e28ba161595b0fc9e8896c00399bb ] 'snprintf' returns the number of characters which would have been written if enough space had been available, excluding the terminating null byte. Thus, the return value of 'sizeof(buf)' means that the last character has been dropped. Signed-off-by: Fedor Tokarev <ftokarev@gmail.com> Fixes: 2f34b8bfae19 ("SUNRPC: add links for all client xprts to debugfs") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30SUNRPC: xprt_load_transport() needs to support the netid "rdma6"Trond Myklebust4-16/+55
[ Upstream commit d5aa6b22e2258f05317313ecc02efbb988ed6d38 ] According to RFC5666, the correct netid for an IPv6 addressed RDMA transport is "rdma6", which we've supported as a mount option since Linux-4.7. The problem is when we try to load the module "xprtrdma6", that will fail, since there is no modulealias of that name. Fixes: 181342c5ebe8 ("xprtrdma: Add rdma6 option to support NFS/RDMA IPv6") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30SUNRPC: rpc_wake_up() should wake up tasks in the correct orderTrond Myklebust1-30/+35
[ Upstream commit e4c72201b6ec3173dfe13fa2e2335a3ad78d4921 ] Currently, we wake up the tasks by priority queue ordering, which means that we ignore the batching that is supposed to help with QoS issues. Fixes: c049f8ea9a0d ("SUNRPC: Remove the bh-safe lock requirement on the rpc_wait_queue->lock") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30Bluetooth: Fix: LL PRivacy BLE device fails to connectSathish Narasimman1-4/+8
[ Upstream commit 1fb17dfc258ff6208f7873cc7b8e40e27515d2d5 ] When adding device to white list the device is added to resolving list also. It has to be added only when HCI_ENABLE_LL_PRIVACY flag is set. HCI_ENABLE_LL_PRIVACY flag has to be tested before adding/deleting devices to resolving list. use_ll_privacy macro is used only to check if controller supports LL_Privacy. https://bugzilla.kernel.org/show_bug.cgi?id=209745 Fixes: 0eee35bdfa3b ("Bluetooth: Update resolving list when updating whitelist") Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30Bluetooth: Fix null pointer dereference in hci_event_packet()Anmol Karn1-0/+5
[ Upstream commit 6dfccd13db2ff2b709ef60a50163925d477549aa ] AMP_MGR is getting derefernced in hci_phy_link_complete_evt(), when called from hci_event_packet() and there is a possibility, that hcon->amp_mgr may not be found when accessing after initialization of hcon. - net/bluetooth/hci_event.c:4945 The bug seems to get triggered in this line: bredr_hcon = hcon->amp_mgr->l2cap_conn->hcon; Fix it by adding a NULL check for the hcon->amp_mgr before checking the ev-status. Fixes: d5e911928bd8 ("Bluetooth: AMP: Process Physical Link Complete evt") Reported-and-tested-by: syzbot+0bef568258653cff272f@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=0bef568258653cff272f Signed-off-by: Anmol Karn <anmol.karan123@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30nl80211/cfg80211: fix potential infinite loopColin Ian King1-1/+1
[ Upstream commit ba5c25236bc3d399df82ebe923490ea8d2d35cf2 ] The for-loop iterates with a u8 loop counter and compares this with the loop upper limit of request->n_ssids which is an int type. There is a potential infinite loop if n_ssids is larger than the u8 loop counter, so fix this by making the loop counter an int. Addresses-Coverity: ("Infinite loop") Fixes: c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201029222407.390218-1-colin.king@canonical.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-26nl80211: validate key indexes for cfg80211_registered_deviceAnant Thazhemadam3-11/+49
commit 2d9463083ce92636a1bdd3e30d1236e3e95d859e upstream. syzbot discovered a bug in which an OOB access was being made because an unsuitable key_idx value was wrongly considered to be acceptable while deleting a key in nl80211_del_key(). Since we don't know the cipher at the time of deletion, if cfg80211_validate_key_settings() were to be called directly in nl80211_del_key(), even valid keys would be wrongly determined invalid, and deletion wouldn't occur correctly. For this reason, a new function - cfg80211_valid_key_idx(), has been created, to determine if the key_idx value provided is valid or not. cfg80211_valid_key_idx() is directly called in 2 places - nl80211_del_key(), and cfg80211_validate_key_settings(). Reported-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com Tested-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20201204215825.129879-1-anant.thazhemadam@gmail.com Cc: stable@vger.kernel.org [also disallow IGTK key IDs if no IGTK cipher is supported] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-26Bluetooth: Fix slab-out-of-bounds read in hci_le_direct_adv_report_evt()Peilin Ye1-7/+5
commit f7e0e8b2f1b0a09b527885babda3e912ba820798 upstream. `num_reports` is not being properly checked. A malformed event packet with a large `num_reports` number makes hci_le_direct_adv_report_evt() read out of bounds. Fix it. Cc: stable@vger.kernel.org Fixes: 2f010b55884e ("Bluetooth: Add support for handling LE Direct Advertising Report events") Reported-and-tested-by: syzbot+24ebd650e20bd263ca01@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=24ebd650e20bd263ca01 Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-26net: ipconfig: Avoid spurious blank lines in boot logThierry Reding1-5/+9
commit c9f64d1fc101c64ea2be1b2e562b4395127befc9 upstream. When dumping the name and NTP servers advertised by DHCP, a blank line is emitted if either of the lists is empty. This can lead to confusing issues such as the blank line getting flagged as warning. This happens because the blank line is the result of pr_cont("\n") and that may see its level corrupted by some other driver concurrently writing to the console. Fix this by making sure that the terminating newline is only emitted if at least one entry in the lists was printed before. Reported-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20201110073757.1284594-1-thierry.reding@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller6-31/+59
Alexei Starovoitov says: ==================== pull-request: bpf 2020-12-10 The following pull-request contains BPF updates for your *net* tree. We've added 21 non-merge commits during the last 12 day(s) which contain a total of 21 files changed, 163 insertions(+), 88 deletions(-). The main changes are: 1) Fix propagation of 32-bit signed bounds from 64-bit bounds, from Alexei. 2) Fix ring_buffer__poll() return value, from Andrii. 3) Fix race in lwt_bpf, from Cong. 4) Fix test_offload, from Toke. 5) Various xsk fixes. Please consider pulling these changes from: git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git Thanks a lot! Also thanks to reporters, reviewers and testers of commits in this pull-request: Cong Wang, Hulk Robot, Jakub Kicinski, Jean-Philippe Brucker, John Fastabend, Magnus Karlsson, Maxim Mikityanskiy, Yonghong Song ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10net: sched: Fix dump of MPLS_OPT_LSE_LABEL attribute in cls_flowerGuillaume Nault1-2/+2
TCA_FLOWER_KEY_MPLS_OPT_LSE_LABEL is a u32 attribute (MPLS label is 20 bits long). Fixes the following bug: $ tc filter add dev ethX ingress protocol mpls_uc \ flower mpls lse depth 2 label 256 \ action drop $ tc filter show dev ethX ingress filter protocol mpls_uc pref 49152 flower chain 0 filter protocol mpls_uc pref 49152 flower chain 0 handle 0x1 eth_type 8847 mpls lse depth 2 label 0 <-- invalid label 0, should be 256 ... Fixes: 61aec25a6db5 ("cls_flower: Support filtering on multiple MPLS Label Stack Entries") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller7-62/+47
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Switch to RCU in x_tables to fix possible NULL pointer dereference, from Subash Abhinov Kasiviswanathan. 2) Fix netlink dump of dynset timeouts later than 23 days. 3) Add comment for the indirect serialization of the nft commit mutex with rtnl_mutex. 4) Remove bogus check for confirmed conntrack when matching on the conntrack ID, from Brett Mastbergen. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10tcp: fix cwnd-limited bug for TSO deferral where we send nothingNeal Cardwell1-3/+6
When cwnd is not a multiple of the TSO skb size of N*MSS, we can get into persistent scenarios where we have the following sequence: (1) ACK for full-sized skb of N*MSS arrives -> tcp_write_xmit() transmit full-sized skb with N*MSS -> move pacing release time forward -> exit tcp_write_xmit() because pacing time is in the future (2) TSQ callback or TCP internal pacing timer fires -> try to transmit next skb, but TSO deferral finds remainder of available cwnd is not big enough to trigger an immediate send now, so we defer sending until the next ACK. (3) repeat... So we can get into a case where we never mark ourselves as cwnd-limited for many seconds at a time, even with bulk/infinite-backlog senders, because: o In case (1) above, every time in tcp_write_xmit() we have enough cwnd to send a full-sized skb, we are not fully using the cwnd (because cwnd is not a multiple of the TSO skb size). So every time we send data, we are not cwnd limited, and so in the cwnd-limited tracking code in tcp_cwnd_validate() we mark ourselves as not cwnd-limited. o In case (2) above, every time in tcp_write_xmit() that we try to transmit the "remainder" of the cwnd but defer, we set the local variable is_cwnd_limited to true, but we do not send any packets, so sent_pkts is zero, so we don't call the cwnd-limited logic to update tp->is_cwnd_limited. Fixes: ca8a22634381 ("tcp: make cwnd-limited checks measurement-based, and gentler") Reported-by: Ingemar Johansson <ingemar.s.johansson@ericsson.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201209035759.1225145-1-ncardwell.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-10net: flow_offload: Fix memory leak for indirect flow blockChris Mi1-3/+1
The offending commit introduces a cleanup callback that is invoked when the driver module is removed to clean up the tunnel device flow block. But it returns on the first iteration of the for loop. The remaining indirect flow blocks will never be freed. Fixes: 1fac52da5942 ("net: flow_offload: consolidate indirect flow_block infrastructure") CC: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com>
2020-12-10tcp: Retain ECT bits for tos reflectionWei Wang2-4/+10
For DCTCP, we have to retain the ECT bits set by the congestion control algorithm on the socket when reflecting syn TOS in syn-ack, in order to make ECN work properly. Fixes: ac8f1710c12b ("tcp: reflect tos value received in SYN to the socket") Reported-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Wei Wang <weiwan@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10ethtool: fix stack overflow in ethnl_parse_bitset()Michal Kubecek1-0/+2
Syzbot reported a stack overflow in bitmap_from_arr32() called from ethnl_parse_bitset() when bitset from netlink message is longer than target bitmap length. While ethnl_compact_sanity_checks() makes sure that trailing part is all zeros (i.e. the request does not try to touch bits kernel does not recognize), we also need to cap change_bits to nbits so that we don't try to write past the prepared bitmaps. Fixes: 88db6d1e4f62 ("ethtool: add ethnl_parse_bitset() helper") Reported-by: syzbot+9d39fa49d4df294aab93@syzkaller.appspotmail.com Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/r/3487ee3a98e14cd526f55b6caaa959d2dcbcad9f.1607465316.git.mkubecek@suse.cz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-09can: isotp: isotp_setsockopt(): block setsockopt on bound socketsOliver Hartkopp1-0/+3
The isotp socket can be widely configured in its behaviour regarding addressing types, fill-ups, receive pattern tests and link layer length. Usually all these settings need to be fixed before bind() and can not be changed afterwards. This patch adds a check to enforce the common usage pattern. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Thomas Wagner <thwa1@web.de> Link: https://lore.kernel.org/r/20201203140604.25488-2-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20201204133508.742120-3-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-09xdp: Remove the xdp_attachment_flags_ok() callbackToke Høiland-Jørgensen2-14/+20
Since commit 7f0a838254bd ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device"), the XDP program attachment info is now maintained in the core code. This interacts badly with the xdp_attachment_flags_ok() check that prevents unloading an XDP program with different load flags than it was loaded with. In practice, two kinds of failures are seen: - An XDP program loaded without specifying a mode (and which then ends up in driver mode) cannot be unloaded if the program mode is specified on unload. - The dev_xdp_uninstall() hook always calls the driver callback with the mode set to the type of the program but an empty flags argument, which means the flags_ok() check prevents the program from being removed, leading to bpf prog reference leaks. The original reason this check was added was to avoid ambiguity when multiple programs were loaded. With the way the checks are done in the core now, this is quite simple to enforce in the core code, so let's add a check there and get rid of the xdp_attachment_flags_ok() callback entirely. Fixes: 7f0a838254bd ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/160752225751.110217.10267659521308669050.stgit@toke.dk
2020-12-09netfilter: nft_ct: Remove confirmation check for NFT_CT_IDBrett Mastbergen1-2/+0
Since commit 656c8e9cc1ba ("netfilter: conntrack: Use consistent ct id hash calculation") the ct id will not change from initialization to confirmation. Removing the confirmation check allows for things like adding an element to a 'typeof ct id' set in prerouting upon reception of the first packet of a new connection, and then being able to reference that set consistently both before and after the connection is confirmed. Fixes: 656c8e9cc1ba ("netfilter: conntrack: Use consistent ct id hash calculation") Signed-off-by: Brett Mastbergen <brett.mastbergen@gmail.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-12-09tcp: select sane initial rcvq_space.space for big MSSEric Dumazet1-1/+2
Before commit a337531b942b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB") small tcp_rmem[1] values were overridden by tcp_fixup_rcvbuf() to accommodate various MSS. This is no longer the case, and Hazem Mohamed Abuelfotoh reported that DRS would not work for MTU 9000 endpoints receiving regular (1500 bytes) frames. Root cause is that tcp_init_buffer_space() uses tp->rcv_wnd for upper limit of rcvq_space.space computation, while it can select later a smaller value for tp->rcv_ssthresh and tp->window_clamp. ss -temoi on receiver would show : skmem:(r0,rb131072,t0,tb46080,f0,w0,o0,bl0,d0) rcv_space:62496 rcv_ssthresh:56596 This means that TCP can not increase its window in tcp_grow_window(), and that DRS can never kick. Fix this by making sure that rcvq_space.space is not bigger than number of bytes that can be held in TCP receive queue. People unable/unwilling to change their kernel can work around this issue by selecting a bigger tcp_rmem[1] value as in : echo "4096 196608 6291456" >/proc/sys/net/ipv4/tcp_rmem Based on an initial report and patch from Hazem Mohamed Abuelfotoh https://lore.kernel.org/netdev/20201204180622.14285-1-abuehaze@amazon.com/ Fixes: a337531b942b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB") Fixes: 041a14d26715 ("tcp: start receiver buffer autotuning sooner") Reported-by: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: tipc: prevent possible null deref of linkCengiz Can1-2/+4
`tipc_node_apply_property` does a null check on a `tipc_link_entry` pointer but also accesses the same pointer out of the null check block. This triggers a warning on Coverity Static Analyzer because we're implying that `e->link` can BE null. Move "Update MTU for node link entry" line into if block to make sure that we're not in a state that `e->link` is null. Signed-off-by: Cengiz Can <cengiz@kernel.wtf> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08netfilter: nftables: comment indirect serialization of commit_mutex with ↵Pablo Neira Ayuso1-0/+4
rtnl_mutex Add an explicit comment in the code to describe the indirect serialization of the holders of the commit_mutex with the rtnl_mutex. Commit 90d2723c6d4c ("netfilter: nf_tables: do not hold reference on netdevice from preparation phase") already describes this, but a comment in this case is better for reference. Reported-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-12-08netfilter: nft_dynset: fix timeouts later than 23 daysPablo Neira Ayuso2-5/+7
Use nf_msecs_to_jiffies64 and nf_jiffies64_to_msecs as provided by 8e1102d5a159 ("netfilter: nf_tables: support timeouts larger than 23 days"), otherwise ruleset listing breaks. Fixes: a8b1e36d0d1d ("netfilter: nft_dynset: fix element timeout for HZ != 1000") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-12-08netfilter: x_tables: Switch synchronization to RCUSubash Abhinov Kasiviswanathan4-55/+36
When running concurrent iptables rules replacement with data, the per CPU sequence count is checked after the assignment of the new information. The sequence count is used to synchronize with the packet path without the use of any explicit locking. If there are any packets in the packet path using the table information, the sequence count is incremented to an odd value and is incremented to an even after the packet process completion. The new table value assignment is followed by a write memory barrier so every CPU should see the latest value. If the packet path has started with the old table information, the sequence counter will be odd and the iptables replacement will wait till the sequence count is even prior to freeing the old table info. However, this assumes that the new table information assignment and the memory barrier is actually executed prior to the counter check in the replacement thread. If CPU decides to execute the assignment later as there is no user of the table information prior to the sequence check, the packet path in another CPU may use the old table information. The replacement thread would then free the table information under it leading to a use after free in the packet processing context- Unable to handle kernel NULL pointer dereference at virtual address 000000000000008e pc : ip6t_do_table+0x5d0/0x89c lr : ip6t_do_table+0x5b8/0x89c ip6t_do_table+0x5d0/0x89c ip6table_filter_hook+0x24/0x30 nf_hook_slow+0x84/0x120 ip6_input+0x74/0xe0 ip6_rcv_finish+0x7c/0x128 ipv6_rcv+0xac/0xe4 __netif_receive_skb+0x84/0x17c process_backlog+0x15c/0x1b8 napi_poll+0x88/0x284 net_rx_action+0xbc/0x23c __do_softirq+0x20c/0x48c This could be fixed by forcing instruction order after the new table information assignment or by switching to RCU for the synchronization. Fixes: 80055dab5de0 ("netfilter: x_tables: make xt_replace_table wait until old rules are not used anymore") Reported-by: Sean Tranchetti <stranche@codeaurora.org> Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Florian Westphal <fw@strlen.de> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-12-08Merge branch 'master' of ↵Jakub Kicinski2-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2020-12-07 1) Sysbot reported fixes for the new 64/32 bit compat layer. From Dmitry Safonov. 2) Fix a memory leak in xfrm_user_policy that was introduced by adding the 64/32 bit compat layer. From Yu Kuai. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec: net: xfrm: fix memory leak in xfrm_user_policy() xfrm/compat: Don't allocate memory with __GFP_ZERO xfrm/compat: memset(0) 64-bit padding at right place xfrm/compat: Translate by copying XFRMA_UNSPEC attribute ==================== Link: https://lore.kernel.org/r/20201207093937.2874932-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-08mptcp: print new line in mptcp_seq_show() if mptcp isn't in useJianguo Wu1-0/+1
When do cat /proc/net/netstat, the output isn't append with a new line, it looks like this: [root@localhost ~]# cat /proc/net/netstat ... MPTcpExt: 0 0 0 0 0 0 0 0 0 0 0 0 0[root@localhost ~]# This is because in mptcp_seq_show(), if mptcp isn't in use, net->mib.mptcp_statistics is NULL, so it just puts all 0 after "MPTcpExt:", and return, forgot the '\n'. After this patch: [root@localhost ~]# cat /proc/net/netstat ... MPTcpExt: 0 0 0 0 0 0 0 0 0 0 0 0 0 [root@localhost ~]# Fixes: fc518953bc9c8d7d ("mptcp: add and use MIB counter infrastructure") Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Acked-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/142e2fd9-58d9-bb13-fb75-951cccc2331e@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-08bridge: Fix a deadlock when enabling multicast snoopingJoseph Huang3-9/+41
When enabling multicast snooping, bridge module deadlocks on multicast_lock if 1) IPv6 is enabled, and 2) there is an existing querier on the same L2 network. The deadlock was caused by the following sequence: While holding the lock, br_multicast_open calls br_multicast_join_snoopers, which eventually causes IP stack to (attempt to) send out a Listener Report (in igmp6_join_group). Since the destination Ethernet address is a multicast address, br_dev_xmit feeds the packet back to the bridge via br_multicast_rcv, which in turn calls br_multicast_add_group, which then deadlocks on multicast_lock. The fix is to move the call br_multicast_join_snoopers outside of the critical section. This works since br_multicast_join_snoopers only deals with IP and does not modify any multicast data structures of the bridge, so there's no need to hold the lock. Steps to reproduce: 1. sysctl net.ipv6.conf.all.force_mld_version=1 2. have another querier 3. ip link set dev bridge type bridge mcast_snooping 0 && \ ip link set dev bridge type bridge mcast_snooping 1 < deadlock > A typical call trace looks like the following: [ 936.251495] _raw_spin_lock+0x5c/0x68 [ 936.255221] br_multicast_add_group+0x40/0x170 [bridge] [ 936.260491] br_multicast_rcv+0x7ac/0xe30 [bridge] [ 936.265322] br_dev_xmit+0x140/0x368 [bridge] [ 936.269689] dev_hard_start_xmit+0x94/0x158 [ 936.273876] __dev_queue_xmit+0x5ac/0x7f8 [ 936.277890] dev_queue_xmit+0x10/0x18 [ 936.281563] neigh_resolve_output+0xec/0x198 [ 936.285845] ip6_finish_output2+0x240/0x710 [ 936.290039] __ip6_finish_output+0x130/0x170 [ 936.294318] ip6_output+0x6c/0x1c8 [ 936.297731] NF_HOOK.constprop.0+0xd8/0xe8 [ 936.301834] igmp6_send+0x358/0x558 [ 936.305326] igmp6_join_group.part.0+0x30/0xf0 [ 936.309774] igmp6_group_added+0xfc/0x110 [ 936.313787] __ipv6_dev_mc_inc+0x1a4/0x290 [ 936.317885] ipv6_dev_mc_inc+0x10/0x18 [ 936.321677] br_multicast_open+0xbc/0x110 [bridge] [ 936.326506] br_multicast_toggle+0xec/0x140 [bridge] Fixes: 4effd28c1245 ("bridge: join all-snoopers multicast address") Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20201204235628.50653-1-Joseph.Huang@garmin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-07lwt_bpf: Replace preempt_disable() with migrate_disable()Cong Wang1-3/+3
migrate_disable() is just a wrapper for preempt_disable() in non-RT kernel. It is safe to replace it, and RT kernel will benefit. Note that it is introduced since Feb 2020. Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201205075946.497763-2-xiyou.wangcong@gmail.com
2020-12-07lwt: Disable BH too in run_lwt_bpf()Dongdong Wang1-4/+4
The per-cpu bpf_redirect_info is shared among all skb_do_redirect() and BPF redirect helpers. Callers on RX path are all in BH context, disabling preemption is not sufficient to prevent BH interruption. In production, we observed strange packet drops because of the race condition between LWT xmit and TC ingress, and we verified this issue is fixed after we disable BH. Although this bug was technically introduced from the beginning, that is commit 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure"), at that time call_rcu() had to be call_rcu_bh() to match the RCU context. So this patch may not work well before RCU flavor consolidation has been completed around v5.0. Update the comments above the code too, as call_rcu() is now BH friendly. Signed-off-by: Dongdong Wang <wangdongdong.6@bytedance.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/bpf/20201205075946.497763-1-xiyou.wangcong@gmail.com
2020-12-07udp: fix the proto value passed to ip_protocol_deliver_rcu for the segmentsXin Long1-1/+1
Guillaume noticed that: for segments udp_queue_rcv_one_skb() returns the proto, and it should pass "ret" unmodified to ip_protocol_deliver_rcu(). Otherwize, with a negtive value passed, it will underflow inet_protos. This can be reproduced with IPIP FOU: # ip fou add port 5555 ipproto 4 # ethtool -K eth1 rx-gro-list on Fixes: cf329aa42b66 ("udp: cope with UDP GRO packet misdirection") Reported-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-05mac80211: mesh: fix mesh_pathtbl_init() error pathEric Dumazet1-3/+1
If tbl_mpp can not be allocated, we call mesh_table_free(tbl_path) while tbl_path rhashtable has not yet been initialized, which causes panics. Simply factorize the rhashtable_init() call into mesh_table_alloc() WARNING: CPU: 1 PID: 8474 at kernel/workqueue.c:3040 __flush_work kernel/workqueue.c:3040 [inline] WARNING: CPU: 1 PID: 8474 at kernel/workqueue.c:3040 __cancel_work_timer+0x514/0x540 kernel/workqueue.c:3136 Modules linked in: CPU: 1 PID: 8474 Comm: syz-executor663 Not tainted 5.10.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__flush_work kernel/workqueue.c:3040 [inline] RIP: 0010:__cancel_work_timer+0x514/0x540 kernel/workqueue.c:3136 Code: 5d c3 e8 bf ae 29 00 0f 0b e9 f0 fd ff ff e8 b3 ae 29 00 0f 0b 43 80 3c 3e 00 0f 85 31 ff ff ff e9 34 ff ff ff e8 9c ae 29 00 <0f> 0b e9 dc fe ff ff 89 e9 80 e1 07 80 c1 03 38 c1 0f 8c 7d fd ff RSP: 0018:ffffc9000165f5a0 EFLAGS: 00010293 RAX: ffffffff814b7064 RBX: 0000000000000001 RCX: ffff888021c80000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff888024039ca0 R08: dffffc0000000000 R09: fffffbfff1dd3e64 R10: fffffbfff1dd3e64 R11: 0000000000000000 R12: 1ffff920002cbebd R13: ffff888024039c88 R14: 1ffff11004807391 R15: dffffc0000000000 FS: 0000000001347880(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000140 CR3: 000000002cc0a000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rhashtable_free_and_destroy+0x25/0x9c0 lib/rhashtable.c:1137 mesh_table_free net/mac80211/mesh_pathtbl.c:69 [inline] mesh_pathtbl_init+0x287/0x2e0 net/mac80211/mesh_pathtbl.c:785 ieee80211_mesh_init_sdata+0x2ee/0x530 net/mac80211/mesh.c:1591 ieee80211_setup_sdata+0x733/0xc40 net/mac80211/iface.c:1569 ieee80211_if_add+0xd5c/0x1cd0 net/mac80211/iface.c:1987 ieee80211_add_iface+0x59/0x130 net/mac80211/cfg.c:125 rdev_add_virtual_intf net/wireless/rdev-ops.h:45 [inline] nl80211_new_interface+0x563/0xb40 net/wireless/nl80211.c:3855 genl_family_rcv_msg_doit net/netlink/genetlink.c:739 [inline] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] genl_rcv_msg+0xe4e/0x1280 net/netlink/genetlink.c:800 netlink_rcv_skb+0x190/0x3a0 net/netlink/af_netlink.c:2494 genl_rcv+0x24/0x40 net/netlink/genetlink.c:811 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x780/0x930 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x9a8/0xd40 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] ____sys_sendmsg+0x519/0x800 net/socket.c:2353 ___sys_sendmsg net/socket.c:2407 [inline] __sys_sendmsg+0x2b1/0x360 net/socket.c:2440 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 60854fd94573 ("mac80211: mesh: convert path table to rhashtable") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Link: https://lore.kernel.org/r/20201204162428.2583119-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05openvswitch: fix error return code in validate_and_copy_dec_ttl()Wang Hai1-1/+1
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Changing 'return start' to 'return action_start' can fix this bug. Fixes: 69929d4c49e1 ("net: openvswitch: fix TTL decrement action netlink message format") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/20201204114314.1596-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05net: bridge: vlan: fix error return code in __vlan_add()Zhang Changzhong1-1/+3
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: f8ed289fab84 ("bridge: vlan: use br_vlan_(get|put)_master to deal with refcounts") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/1607071737-33875-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05ipv4: fix error return code in rtm_to_fib_config()Zhang Changzhong1-1/+1
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: d15662682db2 ("ipv4: Allow ipv6 gateway with ipv4 routes") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/1607071695-33740-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05net/sched: fq_pie: initialize timer earlier in fq_pie_init()Davide Caratti1-1/+1
with the following tdc testcase: 83be: (qdisc, fq_pie) Create FQ-PIE with invalid number of flows as fq_pie_init() fails, fq_pie_destroy() is called to clean up. Since the timer is not yet initialized, it's possible to observe a splat like this: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 975 Comm: tc Not tainted 5.10.0-rc4+ #298 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: dump_stack+0x99/0xcb register_lock_class+0x12dd/0x1750 __lock_acquire+0xfe/0x3970 lock_acquire+0x1c8/0x7f0 del_timer_sync+0x49/0xd0 fq_pie_destroy+0x3f/0x80 [sch_fq_pie] qdisc_create+0x916/0x1160 tc_modify_qdisc+0x3c4/0x1630 rtnetlink_rcv_msg+0x346/0x8e0 netlink_unicast+0x439/0x630 netlink_sendmsg+0x719/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5ba/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 [...] ODEBUG: assert_init not available (active state 0) object type: timer_list hint: 0x0 WARNING: CPU: 0 PID: 975 at lib/debugobjects.c:508 debug_print_object+0x162/0x210 [...] Call Trace: debug_object_assert_init+0x268/0x380 try_to_del_timer_sync+0x6a/0x100 del_timer_sync+0x9e/0xd0 fq_pie_destroy+0x3f/0x80 [sch_fq_pie] qdisc_create+0x916/0x1160 tc_modify_qdisc+0x3c4/0x1630 rtnetlink_rcv_msg+0x346/0x8e0 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x439/0x630 netlink_sendmsg+0x719/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5ba/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 fix it moving timer_setup() before any failure, like it was done on 'red' with former commit 608b4adab178 ("net_sched: initialize timer earlier in red_init()"). Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/r/2e78e01c504c633ebdff18d041833cf2e079a3a4.1607020450.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04xsk: Return error code if force_zc is setZhang Changzhong1-0/+1
If force_zc is set, we should exit out with an error, not fall back to copy mode. Fixes: 921b68692abb ("xsk: Enable sharing of dma mappings") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/1607077277-41995-1-git-send-email-zhangchangzhong@huawei.com
2020-12-04mac80211: set SDATA_STATE_RUNNING for monitor interfacesBorwankar, Antara1-0/+2
During restarrt, mac80211 is supposed to reconfigure the driver. When there's a monitor interface, the interface is added and the channel context for it was created, but not assigned to it as it was not considered running during the restart. Fix this by setting SDATA_STATE_RUNNING while adding monitor interfaces. Signed-off-by: Borwankar, Antara <antara.borwankar@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.e1df99693a4c.I494579f28018c2d0b9d4083a664cf872c28405ae@changeid [reword commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-04cfg80211: initialize rekey_dataSara Sharon1-1/+1
In case we have old supplicant, the akm field is uninitialized. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.930f0ab7ebee.Ic546e384efab3f4a89f318eafddc3eb7d556aecb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-04mac80211: fix return value of ieee80211_chandef_he_6ghz_operWen Gong1-1/+1
ieee80211_chandef_he_6ghz_oper() needs to return true if it determined a value 6 GHz chandef, fix that. Fixes: 1d00ce807efa ("mac80211: support S1G association") Signed-off-by: Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/1606121152-3452-1-git-send-email-wgong@codeaurora.org [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-03net/sched: act_mpls: ensure LSE is pullable before reading itDavide Caratti1-0/+3
when 'act_mpls' is used to mangle the LSE, the current value is read from the packet dereferencing 4 bytes at mpls_hdr(): ensure that the label is contained in the skb "linear" area. Found by code inspection. v2: - use MPLS_HLEN instead of sizeof(new_lse), thanks to Jakub Kicinski Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/3243506cba43d14858f3bd21ee0994160e44d64a.1606987058.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-11 02:19:02 +0300