| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In 9dbbfb0ab6680c6a85609041011484e6658e7d3c function tipc_sk_reinit
had additional logic added to loop in the event that function
rhashtable_walk_next() returned -EAGAIN. No worries.
However, if rhashtable_walk_start returns -EAGAIN, it does "continue",
and therefore skips the call to rhashtable_walk_stop(). That has
the effect of calling rcu_read_lock() without its paired call to
rcu_read_unlock(). Since rcu_read_lock() may be nested, the problem
may not be apparent for a while, especially since resize events may
be rare. But the comments to rhashtable_walk_start() state:
* ...Note that we take the RCU lock in all
* cases including when we return an error. So you must always call
* rhashtable_walk_stop to clean up.
This patch replaces the continue with a goto and label to ensure a
matching call to rhashtable_walk_stop().
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree,
they are:
1) Fix use after free of struct proc_dir_entry in ipt_CLUSTERIP, patch
from Sabrina Dubroca.
2) Fix spurious EINVAL errors from iptables over nft compatibility layer.
3) Reload pointer to ip header only if there is non-terminal verdict,
ie. XT_CONTINUE, otherwise invalid memory access may happen, patch
from Taehee Yoo.
4) Fix interaction between SYNPROXY and NAT, SYNPROXY adds sequence
adjustment already, however from nf_nat_setup() assumes there's not.
Patch from Xin Long.
5) Fix burst arithmetics in nft_limit as Joe Stringer mentioned during
NFWS in Faro. Patch from Andy Zhou.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current implementation treats the burst configuration the same as
rate configuration. This can cause the per packet cost to be lower
than configured. In effect, this bug causes the token bucket to be
refilled at a higher rate than what user has specified.
This patch changes the implementation so that the token bucket size
is controlled by "rate + burst", while maintain the token bucket
refill rate the same as user specified.
Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Andy Zhou <azhou@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Commit 4440a2ab3b9f ("netfilter: synproxy: Check oom when adding synproxy
and seqadj ct extensions") wanted to drop the packet when it fails to add
seqadj ext due to no memory by checking if nfct_seqadj_ext_add returns
NULL.
But that nfct_seqadj_ext_add returns NULL can also happen when seqadj ext
already exists in a nf_conn. It will cause that userspace protocol doesn't
work when both dnat and snat are configured.
Li Shuang found this issue in the case:
Topo:
ftp client router ftp server
10.167.131.2 <-> 10.167.131.254 10.167.141.254 <-> 10.167.141.1
Rules:
# iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 21 -j \
DNAT --to-destination 10.167.141.1
# iptables -t nat -A POSTROUTING -o eth2 -p tcp -m tcp --dport 21 -j \
SNAT --to-source 10.167.141.254
In router, when both dnat and snat are added, nf_nat_setup_info will be
called twice. The packet can be dropped at the 2nd time for DNAT due to
seqadj ext is already added at the 1st time for SNAT.
This patch is to fix it by checking for seqadj ext existence before adding
it, so that the packet will not be dropped if seqadj ext already exists.
Note that as Florian mentioned, as a long term, we should review ext_add()
behaviour, it's better to return a pointer to the existing ext instead.
Fixes: 4440a2ab3b9f ("netfilter: synproxy: Check oom when adding synproxy and seqadj ct extensions")
Reported-by: Li Shuang <shuali@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
inet_diag_msg_sctp{,l}addr_fill() and sctp_get_sctp_info() copy
sizeof(sockaddr_storage) bytes to fill in sockaddr structs used
to export diagnostic information to userspace.
However, the memory allocated to store sockaddr information is
smaller than that and depends on the address family, so we leak
up to 100 uninitialized bytes to userspace. Just use the size of
the source structs instead, in all the three cases this is what
userspace expects. Zero out the remaining memory.
Unused bytes (i.e. when IPv4 addresses are used) in source
structs sctp_sockaddr_entry and sctp_transport are already
cleared by sctp_add_bind_addr() and sctp_transport_new(),
respectively.
Noticed while testing KASAN-enabled kernel with 'ss':
[ 2326.885243] BUG: KASAN: slab-out-of-bounds in inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag] at addr ffff881be8779800
[ 2326.896800] Read of size 128 by task ss/9527
[ 2326.901564] CPU: 0 PID: 9527 Comm: ss Not tainted 4.11.0-22.el7a.x86_64 #1
[ 2326.909236] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
[ 2326.917585] Call Trace:
[ 2326.920312] dump_stack+0x63/0x8d
[ 2326.924014] kasan_object_err+0x21/0x70
[ 2326.928295] kasan_report+0x288/0x540
[ 2326.932380] ? inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag]
[ 2326.938500] ? skb_put+0x8b/0xd0
[ 2326.942098] ? memset+0x31/0x40
[ 2326.945599] check_memory_region+0x13c/0x1a0
[ 2326.950362] memcpy+0x23/0x50
[ 2326.953669] inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag]
[ 2326.959596] ? inet_diag_msg_sctpasoc_fill+0x460/0x460 [sctp_diag]
[ 2326.966495] ? __lock_sock+0x102/0x150
[ 2326.970671] ? sock_def_wakeup+0x60/0x60
[ 2326.975048] ? remove_wait_queue+0xc0/0xc0
[ 2326.979619] sctp_diag_dump+0x44a/0x760 [sctp_diag]
[ 2326.985063] ? sctp_ep_dump+0x280/0x280 [sctp_diag]
[ 2326.990504] ? memset+0x31/0x40
[ 2326.994007] ? mutex_lock+0x12/0x40
[ 2326.997900] __inet_diag_dump+0x57/0xb0 [inet_diag]
[ 2327.003340] ? __sys_sendmsg+0x150/0x150
[ 2327.007715] inet_diag_dump+0x4d/0x80 [inet_diag]
[ 2327.012979] netlink_dump+0x1e6/0x490
[ 2327.017064] __netlink_dump_start+0x28e/0x2c0
[ 2327.021924] inet_diag_handler_cmd+0x189/0x1a0 [inet_diag]
[ 2327.028045] ? inet_diag_rcv_msg_compat+0x1b0/0x1b0 [inet_diag]
[ 2327.034651] ? inet_diag_dump_compat+0x190/0x190 [inet_diag]
[ 2327.040965] ? __netlink_lookup+0x1b9/0x260
[ 2327.045631] sock_diag_rcv_msg+0x18b/0x1e0
[ 2327.050199] netlink_rcv_skb+0x14b/0x180
[ 2327.054574] ? sock_diag_bind+0x60/0x60
[ 2327.058850] sock_diag_rcv+0x28/0x40
[ 2327.062837] netlink_unicast+0x2e7/0x3b0
[ 2327.067212] ? netlink_attachskb+0x330/0x330
[ 2327.071975] ? kasan_check_write+0x14/0x20
[ 2327.076544] netlink_sendmsg+0x5be/0x730
[ 2327.080918] ? netlink_unicast+0x3b0/0x3b0
[ 2327.085486] ? kasan_check_write+0x14/0x20
[ 2327.090057] ? selinux_socket_sendmsg+0x24/0x30
[ 2327.095109] ? netlink_unicast+0x3b0/0x3b0
[ 2327.099678] sock_sendmsg+0x74/0x80
[ 2327.103567] ___sys_sendmsg+0x520/0x530
[ 2327.107844] ? __get_locked_pte+0x178/0x200
[ 2327.112510] ? copy_msghdr_from_user+0x270/0x270
[ 2327.117660] ? vm_insert_page+0x360/0x360
[ 2327.122133] ? vm_insert_pfn_prot+0xb4/0x150
[ 2327.126895] ? vm_insert_pfn+0x32/0x40
[ 2327.131077] ? vvar_fault+0x71/0xd0
[ 2327.134968] ? special_mapping_fault+0x69/0x110
[ 2327.140022] ? __do_fault+0x42/0x120
[ 2327.144008] ? __handle_mm_fault+0x1062/0x17a0
[ 2327.148965] ? __fget_light+0xa7/0xc0
[ 2327.153049] __sys_sendmsg+0xcb/0x150
[ 2327.157133] ? __sys_sendmsg+0xcb/0x150
[ 2327.161409] ? SyS_shutdown+0x140/0x140
[ 2327.165688] ? exit_to_usermode_loop+0xd0/0xd0
[ 2327.170646] ? __do_page_fault+0x55d/0x620
[ 2327.175216] ? __sys_sendmsg+0x150/0x150
[ 2327.179591] SyS_sendmsg+0x12/0x20
[ 2327.183384] do_syscall_64+0xe3/0x230
[ 2327.187471] entry_SYSCALL64_slow_path+0x25/0x25
[ 2327.192622] RIP: 0033:0x7f41d18fa3b0
[ 2327.196608] RSP: 002b:00007ffc3b731218 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 2327.205055] RAX: ffffffffffffffda RBX: 00007ffc3b731380 RCX: 00007f41d18fa3b0
[ 2327.213017] RDX: 0000000000000000 RSI: 00007ffc3b731340 RDI: 0000000000000003
[ 2327.220978] RBP: 0000000000000002 R08: 0000000000000004 R09: 0000000000000040
[ 2327.228939] R10: 00007ffc3b730f30 R11: 0000000000000246 R12: 0000000000000003
[ 2327.236901] R13: 00007ffc3b731340 R14: 00007ffc3b7313d0 R15: 0000000000000084
[ 2327.244865] Object at ffff881be87797e0, in cache kmalloc-64 size: 64
[ 2327.251953] Allocated:
[ 2327.254581] PID = 9484
[ 2327.257215] save_stack_trace+0x1b/0x20
[ 2327.261485] save_stack+0x46/0xd0
[ 2327.265179] kasan_kmalloc+0xad/0xe0
[ 2327.269165] kmem_cache_alloc_trace+0xe6/0x1d0
[ 2327.274138] sctp_add_bind_addr+0x58/0x180 [sctp]
[ 2327.279400] sctp_do_bind+0x208/0x310 [sctp]
[ 2327.284176] sctp_bind+0x61/0xa0 [sctp]
[ 2327.288455] inet_bind+0x5f/0x3a0
[ 2327.292151] SYSC_bind+0x1a4/0x1e0
[ 2327.295944] SyS_bind+0xe/0x10
[ 2327.299349] do_syscall_64+0xe3/0x230
[ 2327.303433] return_from_SYSCALL_64+0x0/0x6a
[ 2327.308194] Freed:
[ 2327.310434] PID = 4131
[ 2327.313065] save_stack_trace+0x1b/0x20
[ 2327.317344] save_stack+0x46/0xd0
[ 2327.321040] kasan_slab_free+0x73/0xc0
[ 2327.325220] kfree+0x96/0x1a0
[ 2327.328530] dynamic_kobj_release+0x15/0x40
[ 2327.333195] kobject_release+0x99/0x1e0
[ 2327.337472] kobject_put+0x38/0x70
[ 2327.341266] free_notes_attrs+0x66/0x80
[ 2327.345545] mod_sysfs_teardown+0x1a5/0x270
[ 2327.350211] free_module+0x20/0x2a0
[ 2327.354099] SyS_delete_module+0x2cb/0x2f0
[ 2327.358667] do_syscall_64+0xe3/0x230
[ 2327.362750] return_from_SYSCALL_64+0x0/0x6a
[ 2327.367510] Memory state around the buggy address:
[ 2327.372855] ffff881be8779700: fc fc fc fc 00 00 00 00 00 00 00 00 fc fc fc fc
[ 2327.380914] ffff881be8779780: fb fb fb fb fb fb fb fb fc fc fc fc 00 00 00 00
[ 2327.388972] >ffff881be8779800: 00 00 00 00 fc fc fc fc fb fb fb fb fb fb fb fb
[ 2327.397031] ^
[ 2327.401792] ffff881be8779880: fc fc fc fc fb fb fb fb fb fb fb fb fc fc fc fc
[ 2327.409850] ffff881be8779900: 00 00 00 00 00 04 fc fc fc fc fc fc 00 00 00 00
[ 2327.417907] ==================================================================
This fixes CVE-2017-7558.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1480266
Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file")
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Two kfree_skb() should be consume_skb(), to be friend with drop monitor
(perf record ... -e skb:kfree_skb)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The first call of skb_put_padto() will free up the SKB on error, but we
return NULL which tells dsa_slave_xmit() that the original SKB should be
freed so this would lead to a double free here.
The second skb_put_padto() already frees the passed sk_buff reference
upon error, so calling kfree_skb() on it again is not necessary.
Detected by CoverityScan, CID#1416687 ("USE_AFTER_FREE")
Fixes: e71cb9e00922 ("net: dsa: ksz: fix skb freeing")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rename skb_pad() into __skb_pad() and make it take a third argument:
free_on_error which controls whether kfree_skb() should be called or
not, skb_pad() directly makes use of it and passes true to preserve its
existing behavior. Do exactly the same thing with __skb_put_padto() and
skb_put_padto().
Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcf_chain_flush needs to be called with RTNL. However, on
free_tcf->
tcf_action_goto_chain_fini->
tcf_chain_put->
tcf_chain_destroy->
tcf_chain_flush
callpath, it is called without RTNL.
This issue was notified by following warning:
[ 155.599052] WARNING: suspicious RCU usage
[ 155.603165] 4.13.0-rc5jiri+ #54 Not tainted
[ 155.607456] -----------------------------
[ 155.611561] net/sched/cls_api.c:195 suspicious rcu_dereference_protected() usage!
Since on this callpath, the chain is guaranteed to be already empty
by check in tcf_chain_put, move the tcf_chain_flush call out and call it
only where it is needed - into tcf_block_put.
Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The goto_chain termination action takes a reference of a chain. In that
case, there is an issue when block_put is called tcf_chain_destroy
directly. The follo-up call of tcf_chain_put by goto_chain action free
works with memory that is already freed. This was caught by kasan:
[ 220.337908] BUG: KASAN: use-after-free in tcf_chain_put+0x1b/0x50
[ 220.344103] Read of size 4 at addr ffff88036d1f2cec by task systemd-journal/261
[ 220.353047] CPU: 0 PID: 261 Comm: systemd-journal Not tainted 4.13.0-rc5jiri+ #54
[ 220.360661] Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox x86 mezzanine board, BIOS 4.6.5 08/02/2016
[ 220.371784] Call Trace:
[ 220.374290] <IRQ>
[ 220.376355] dump_stack+0xd5/0x150
[ 220.391485] print_address_description+0x86/0x410
[ 220.396308] kasan_report+0x181/0x4c0
[ 220.415211] tcf_chain_put+0x1b/0x50
[ 220.418949] free_tcf+0x95/0xc0
So allow tcf_chain_destroy to be called multiple times, free only in
case the reference count drops to 0.
Fixes: 5bc1701881e3 ("net: sched: introduce multichain support for filters")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When peeking, if a bad csum is discovered, the skb is unlinked from
the queue with __sk_queue_drop_skb and the peek operation restarted.
__sk_queue_drop_skb only drops packets that match the queue head.
This fails if the skb was found after the head, using SO_PEEK_OFF
socket option. This causes an infinite loop.
We MUST drop this problematic skb, and we can simply check if skb was
already removed by another thread, by looking at skb->next :
This pointer is set to NULL by the __skb_unlink() operation, that might
have happened only under the spinlock protection.
Many thanks to syzkaller team (and particularly Dmitry Vyukov who
provided us nice C reproducers exhibiting the lockup) and Willem de
Bruijn who provided first version for this patch and a test program.
Fixes: 627d2d6b5500 ("udp: enable MSG_PEEK at non-zero offset")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No matter whether a request is inserted into workqueue as a work item
to cancel a subscription or to delete a subscription's subscriber
asynchronously, the work items may be executed in different workers.
As a result, it doesn't mean that one request which is raised prior to
another request is definitely handled before the latter. By contrast,
if the latter request is executed before the former request, below
error may happen:
[ 656.183644] BUG: spinlock bad magic on CPU#0, kworker/u8:0/12117
[ 656.184487] general protection fault: 0000 [#1] SMP
[ 656.185160] Modules linked in: tipc ip6_udp_tunnel udp_tunnel 9pnet_virtio 9p 9pnet virtio_net virtio_pci virtio_ring virtio [last unloaded: ip6_udp_tunnel]
[ 656.187003] CPU: 0 PID: 12117 Comm: kworker/u8:0 Not tainted 4.11.0-rc7+ #6
[ 656.187920] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 656.188690] Workqueue: tipc_rcv tipc_recv_work [tipc]
[ 656.189371] task: ffff88003f5cec40 task.stack: ffffc90004448000
[ 656.190157] RIP: 0010:spin_bug+0xdd/0xf0
[ 656.190678] RSP: 0018:ffffc9000444bcb8 EFLAGS: 00010202
[ 656.191375] RAX: 0000000000000034 RBX: ffff88003f8d1388 RCX: 0000000000000000
[ 656.192321] RDX: ffff88003ba13708 RSI: ffff88003ba0cd08 RDI: ffff88003ba0cd08
[ 656.193265] RBP: ffffc9000444bcd0 R08: 0000000000000030 R09: 000000006b6b6b6b
[ 656.194208] R10: ffff8800bde3e000 R11: 00000000000001b4 R12: 6b6b6b6b6b6b6b6b
[ 656.195157] R13: ffffffff81a3ca64 R14: ffff88003f8d1388 R15: ffff88003f8d13a0
[ 656.196101] FS: 0000000000000000(0000) GS:ffff88003ba00000(0000) knlGS:0000000000000000
[ 656.197172] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 656.197935] CR2: 00007f0b3d2e6000 CR3: 000000003ef9e000 CR4: 00000000000006f0
[ 656.198873] Call Trace:
[ 656.199210] do_raw_spin_lock+0x66/0xa0
[ 656.199735] _raw_spin_lock_bh+0x19/0x20
[ 656.200258] tipc_subscrb_subscrp_delete+0x28/0xf0 [tipc]
[ 656.200990] tipc_subscrb_rcv_cb+0x45/0x260 [tipc]
[ 656.201632] tipc_receive_from_sock+0xaf/0x100 [tipc]
[ 656.202299] tipc_recv_work+0x2b/0x60 [tipc]
[ 656.202872] process_one_work+0x157/0x420
[ 656.203404] worker_thread+0x69/0x4c0
[ 656.203898] kthread+0x138/0x170
[ 656.204328] ? process_one_work+0x420/0x420
[ 656.204889] ? kthread_create_on_node+0x40/0x40
[ 656.205527] ret_from_fork+0x29/0x40
[ 656.206012] Code: 48 8b 0c 25 00 c5 00 00 48 c7 c7 f0 24 a3 81 48 81 c1 f0 05 00 00 65 8b 15 61 ef f5 7e e8 9a 4c 09 00 4d 85 e4 44 8b 4b 08 74 92 <45> 8b 84 24 40 04 00 00 49 8d 8c 24 f0 05 00 00 eb 8d 90 0f 1f
[ 656.208504] RIP: spin_bug+0xdd/0xf0 RSP: ffffc9000444bcb8
[ 656.209798] ---[ end trace e2a800e6eb0770be ]---
In above scenario, the request of deleting subscriber was performed
earlier than the request of canceling a subscription although the
latter was issued before the former, which means tipc_subscrb_delete()
was called before tipc_subscrp_cancel(). As a result, when
tipc_subscrb_subscrp_delete() called by tipc_subscrp_cancel() was
executed to cancel a subscription, the subscription's subscriber
refcnt had been decreased to 1. After tipc_subscrp_delete() where
the subscriber was freed because its refcnt was decremented to zero,
but the subscriber's lock had to be released, as a consequence, panic
happened.
By contrast, if we increase subscriber's refcnt before
tipc_subscrb_subscrp_delete() is called in tipc_subscrp_cancel(),
the panic issue can be avoided.
Fixes: d094c4d5f5c7 ("tipc: add subscription refcount to avoid invalid delete")
Reported-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In commit, 139bb36f754a ("tipc: advance the time of deleting
subscription from subscriber->subscrp_list"), we delete the
subscription from the subscribers list and from nametable
unconditionally. This leads to the following bug if the timer
running tipc_subscrp_timeout() in another CPU accesses the
subscription list after the subscription delete request.
[39.570] general protection fault: 0000 [#1] SMP
::
[39.574] task: ffffffff81c10540 task.stack: ffffffff81c00000
[39.575] RIP: 0010:tipc_subscrp_timeout+0x32/0x80 [tipc]
[39.576] RSP: 0018:ffff88003ba03e90 EFLAGS: 00010282
[39.576] RAX: dead000000000200 RBX: ffff88003f0f3600 RCX: 0000000000000101
[39.577] RDX: dead000000000100 RSI: 0000000000000201 RDI: ffff88003f0d7948
[39.578] RBP: ffff88003ba03ea0 R08: 0000000000000001 R09: ffff88003ba03ef8
[39.579] R10: 000000000000014f R11: 0000000000000000 R12: ffff88003f0d7948
[39.580] R13: ffff88003f0f3618 R14: ffffffffa006c250 R15: ffff88003f0f3600
[39.581] FS: 0000000000000000(0000) GS:ffff88003ba00000(0000) knlGS:0000000000000000
[39.582] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[39.583] CR2: 00007f831c6e0714 CR3: 000000003d3b0000 CR4: 00000000000006f0
[39.584] Call Trace:
[39.584] <IRQ>
[39.585] call_timer_fn+0x3d/0x180
[39.585] ? tipc_subscrb_rcv_cb+0x260/0x260 [tipc]
[39.586] run_timer_softirq+0x168/0x1f0
[39.586] ? sched_clock_cpu+0x16/0xc0
[39.587] __do_softirq+0x9b/0x2de
[39.587] irq_exit+0x60/0x70
[39.588] smp_apic_timer_interrupt+0x3d/0x50
[39.588] apic_timer_interrupt+0x86/0x90
[39.589] RIP: 0010:default_idle+0x20/0xf0
[39.589] RSP: 0018:ffffffff81c03e58 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
[39.590] RAX: 0000000000000000 RBX: ffffffff81c10540 RCX: 0000000000000000
[39.591] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[39.592] RBP: ffffffff81c03e68 R08: 0000000000000000 R09: 0000000000000000
[39.593] R10: ffffc90001cbbe00 R11: 0000000000000000 R12: 0000000000000000
[39.594] R13: ffffffff81c10540 R14: 0000000000000000 R15: 0000000000000000
[39.595] </IRQ>
::
[39.603] RIP: tipc_subscrp_timeout+0x32/0x80 [tipc] RSP: ffff88003ba03e90
[39.604] ---[ end trace 79ce94b7216cb459 ]---
Fixes: 139bb36f754a ("tipc: advance the time of deleting subscription from subscriber->subscrp_list")
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skb_put_padto() will free the sk_buff passed as reference in case of
errors, but we still need to check its return value and decide what to
do.
Detected by CoverityScan, CID#1416688 ("CHECKED_RETURN")
Fixes: ee1c27977284 ("net/hsr: Added support for HSR v1")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We currently keep rt->rt6i_node pointing to the fib6_node for the route.
And some functions make use of this pointer to dereference the fib6_node
from rt structure, e.g. rt6_check(). However, as there is neither
refcount nor rcu taken when dereferencing rt->rt6i_node, it could
potentially cause crashes as rt->rt6i_node could be set to NULL by other
CPUs when doing a route deletion.
This patch introduces an rcu grace period before freeing fib6_node and
makes sure the functions that dereference it takes rcu_read_lock().
Note: there is no "Fixes" tag because this bug was there in a very
early stage.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2017-08-21
1) Fix memleaks when ESP takes an error path.
2) Fix null pointer dereference when creating a sub policy
that matches the same outer flow as main policy does.
From Koichiro Den.
3) Fix possible out-of-bound access in xfrm_migrate.
This patch should go to the stable trees too.
From Vladis Dronov.
4) ESP can return positive and negative error values,
so treat both cases as an error.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A packet length of exactly IPV6_MAXPLEN is allowed, we should
refuse parsing options only if the size is 64KiB or more.
While at it, remove one extra variable and one assignment which
were also introduced by the commit that introduced the size
check. Checking the sum 'offset + len' and only later adding
'len' to 'offset' doesn't provide any advantage over directly
summing to 'offset' and checking it.
Fixes: 6399f1fae4ec ("ipv6: avoid overflow of offset in ip6_find_1stfragopt")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In fib6_add(), it is possible that fib6_add_1() picks an intermediate
node and sets the node's fn->leaf to NULL in order to add this new
route. However, if fib6_add_rt2node() fails to add the new
route for some reason, fn->leaf will be left as NULL and could
potentially cause crash when fn->leaf is accessed in fib6_locate().
This patch makes sure fib6_repair_tree() is called to properly repair
fn->leaf in the above failure case.
Here is the syzkaller reported general protection fault in fib6_locate:
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 0 PID: 40937 Comm: syz-executor3 Not tainted
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: ffff8801d7d64100 ti: ffff8801d01a0000 task.ti: ffff8801d01a0000
RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] __ipv6_prefix_equal64_half include/net/ipv6.h:475 [inline]
RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] ipv6_prefix_equal include/net/ipv6.h:492 [inline]
RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] fib6_locate_1 net/ipv6/ip6_fib.c:1210 [inline]
RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] fib6_locate+0x281/0x3c0 net/ipv6/ip6_fib.c:1233
RSP: 0018:ffff8801d01a36a8 EFLAGS: 00010202
RAX: 0000000000000020 RBX: ffff8801bc790e00 RCX: ffffc90002983000
RDX: 0000000000001219 RSI: ffff8801d01a37a0 RDI: 0000000000000100
RBP: ffff8801d01a36f0 R08: 00000000000000ff R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000001
R13: dffffc0000000000 R14: ffff8801d01a37a0 R15: 0000000000000000
FS: 00007f6afd68c700(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004c6340 CR3: 00000000ba41f000 CR4: 00000000001426f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
ffff8801d01a37a8 ffff8801d01a3780 ffffed003a0346f5 0000000c82a23ea0
ffff8800b7bd7700 ffff8801d01a3780 ffff8800b6a1c940 ffffffff82a23ea0
ffff8801d01a3920 ffff8801d01a3748 ffffffff82a223d6 ffff8801d7d64988
Call Trace:
[<ffffffff82a223d6>] ip6_route_del+0x106/0x570 net/ipv6/route.c:2109
[<ffffffff82a23f9d>] inet6_rtm_delroute+0xfd/0x100 net/ipv6/route.c:3075
[<ffffffff82621359>] rtnetlink_rcv_msg+0x549/0x7a0 net/core/rtnetlink.c:3450
[<ffffffff8274c1d1>] netlink_rcv_skb+0x141/0x370 net/netlink/af_netlink.c:2281
[<ffffffff82613ddf>] rtnetlink_rcv+0x2f/0x40 net/core/rtnetlink.c:3456
[<ffffffff8274ad38>] netlink_unicast_kernel net/netlink/af_netlink.c:1206 [inline]
[<ffffffff8274ad38>] netlink_unicast+0x518/0x750 net/netlink/af_netlink.c:1232
[<ffffffff8274b83e>] netlink_sendmsg+0x8ce/0xc30 net/netlink/af_netlink.c:1778
[<ffffffff82564aff>] sock_sendmsg_nosec net/socket.c:609 [inline]
[<ffffffff82564aff>] sock_sendmsg+0xcf/0x110 net/socket.c:619
[<ffffffff82564d62>] sock_write_iter+0x222/0x3a0 net/socket.c:834
[<ffffffff8178523d>] new_sync_write+0x1dd/0x2b0 fs/read_write.c:478
[<ffffffff817853f4>] __vfs_write+0xe4/0x110 fs/read_write.c:491
[<ffffffff81786c38>] vfs_write+0x178/0x4b0 fs/read_write.c:538
[<ffffffff817892a9>] SYSC_write fs/read_write.c:585 [inline]
[<ffffffff817892a9>] SyS_write+0xd9/0x1b0 fs/read_write.c:577
[<ffffffff82c71e32>] entry_SYSCALL_64_fastpath+0x12/0x17
Note: there is no "Fixes" tag as this seems to be a bug introduced
very early.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As we know in some target's checkentry it may dereference par.entryinfo
to check entry stuff inside. But when sched action calls xt_check_target,
par.entryinfo is set with NULL. It would cause kernel panic when calling
some targets.
It can be reproduce with:
# tc qd add dev eth1 ingress handle ffff:
# tc filter add dev eth1 parent ffff: u32 match u32 0 0 action xt \
-j ECN --ecn-tcp-remove
It could also crash kernel when using target CLUSTERIP or TPROXY.
By now there's no proper value for par.entryinfo in ipt_init_target,
but it can not be set with NULL. This patch is to void all these
panics by setting it with an ipt_entry obj with all members = 0.
Note that this issue has been there since the very beginning.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rxrpc_service_prealloc_one() doesn't set the socket pointer on any new call
it preallocates, but does add it to the rxrpc net namespace call list.
This, however, causes rxrpc_put_call() to oops when the call is discarded
when the socket is closed. rxrpc_put_call() needs the socket to be able to
reach the namespace so that it can use a lock held therein.
Fix this by setting a call's socket pointer immediately before discarding
it.
This can be triggered by unloading the kafs module, resulting in an oops
like the following:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
IP: rxrpc_put_call+0x1e2/0x32d
PGD 0
P4D 0
Oops: 0000 [#1] SMP
Modules linked in: kafs(E-)
CPU: 3 PID: 3037 Comm: rmmod Tainted: G E 4.12.0-fscache+ #213
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
task: ffff8803fc92e2c0 task.stack: ffff8803fef74000
RIP: 0010:rxrpc_put_call+0x1e2/0x32d
RSP: 0018:ffff8803fef77e08 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8803fab99ac0 RCX: 000000000000000f
RDX: ffffffff81c50a40 RSI: 000000000000000c RDI: ffff8803fc92ea88
RBP: ffff8803fef77e30 R08: ffff8803fc87b941 R09: ffffffff82946d20
R10: ffff8803fef77d10 R11: 00000000000076fc R12: 0000000000000005
R13: ffff8803fab99c20 R14: 0000000000000001 R15: ffffffff816c6aee
FS: 00007f915a059700(0000) GS:ffff88041fb80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000030 CR3: 00000003fef39000 CR4: 00000000001406e0
Call Trace:
rxrpc_discard_prealloc+0x325/0x341
rxrpc_listen+0xf9/0x146
kernel_listen+0xb/0xd
afs_close_socket+0x3e/0x173 [kafs]
afs_exit+0x1f/0x57 [kafs]
SyS_delete_module+0x10f/0x19a
do_syscall_64+0x8a/0x149
entry_SYSCALL64_slow_path+0x25/0x25
Fixes: 2baec2c3f854 ("rxrpc: Support network namespacing")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
list.dev has not been initialized and so the copy_to_user is copying
data from the stack back to user space which is a potential
information leak. Fix this ensuring all of list is initialized to
zero.
Detected by CoverityScan, CID#1357894 ("Uninitialized scalar variable")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In some situations tcp_send_loss_probe() can realize that it's unable
to send a loss probe (TLP), and falls back to calling tcp_rearm_rto()
to schedule an RTO timer. In such cases, sometimes tcp_rearm_rto()
realizes that the RTO was eligible to fire immediately or at some
point in the past (delta_us <= 0). Previously in such cases
tcp_rearm_rto() was scheduling such "overdue" RTOs to happen at now +
icsk_rto, which caused needless delays of hundreds of milliseconds
(and non-linear behavior that made reproducible testing
difficult). This commit changes the logic to schedule "overdue" RTOs
ASAP, rather than at now + icsk_rto.
Fixes: 6ba8a3b19e76 ("tcp: Tail loss probe (TLP)")
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Syzkaller hit 'general protection fault in fib_dump_info' bug on
commit 4.13-rc5..
Guilty file: net/ipv4/fib_semantics.c
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 0 PID: 2808 Comm: syz-executor0 Not tainted 4.13.0-rc5 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
Ubuntu-1.8.2-1ubuntu1 04/01/2014
task: ffff880078562700 task.stack: ffff880078110000
RIP: 0010:fib_dump_info+0x388/0x1170 net/ipv4/fib_semantics.c:1314
RSP: 0018:ffff880078117010 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 00000000000000fe RCX: 0000000000000002
RDX: 0000000000000006 RSI: ffff880078117084 RDI: 0000000000000030
RBP: ffff880078117268 R08: 000000000000000c R09: ffff8800780d80c8
R10: 0000000058d629b4 R11: 0000000067fce681 R12: 0000000000000000
R13: ffff8800784bd540 R14: ffff8800780d80b5 R15: ffff8800780d80a4
FS: 00000000022fa940(0000) GS:ffff88007fc00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004387d0 CR3: 0000000079135000 CR4: 00000000000006f0
Call Trace:
inet_rtm_getroute+0xc89/0x1f50 net/ipv4/route.c:2766
rtnetlink_rcv_msg+0x288/0x680 net/core/rtnetlink.c:4217
netlink_rcv_skb+0x340/0x470 net/netlink/af_netlink.c:2397
rtnetlink_rcv+0x28/0x30 net/core/rtnetlink.c:4223
netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline]
netlink_unicast+0x4c4/0x6e0 net/netlink/af_netlink.c:1291
netlink_sendmsg+0x8c4/0xca0 net/netlink/af_netlink.c:1854
sock_sendmsg_nosec net/socket.c:633 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:643
___sys_sendmsg+0x779/0x8d0 net/socket.c:2035
__sys_sendmsg+0xd1/0x170 net/socket.c:2069
SYSC_sendmsg net/socket.c:2080 [inline]
SyS_sendmsg+0x2d/0x50 net/socket.c:2076
entry_SYSCALL_64_fastpath+0x1a/0xa5
RIP: 0033:0x4512e9
RSP: 002b:00007ffc75584cc8 EFLAGS: 00000216 ORIG_RAX:
000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00000000004512e9
RDX: 0000000000000000 RSI: 0000000020f2cfc8 RDI: 0000000000000003
RBP: 000000000000000e R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000216 R12: fffffffffffffffe
R13: 0000000000718000 R14: 0000000020c44ff0 R15: 0000000000000000
Code: 00 0f b6 8d ec fd ff ff 48 8b 85 f0 fd ff ff 88 48 17 48 8b 45
28 48 8d 78 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03
<0f>
b6 04 02 84 c0 74 08 3c 03 0f 8e cb 0c 00 00 48 8b 45 28 44
RIP: fib_dump_info+0x388/0x1170 net/ipv4/fib_semantics.c:1314 RSP:
ffff880078117010
---[ end trace 254a7af28348f88b ]---
This patch adds a res->fi NULL check.
example run:
$ip route get 0.0.0.0 iif virt1-0
broadcast 0.0.0.0 dev lo
cache <local,brd> iif virt1-0
$ip route get 0.0.0.0 iif virt1-0 fibmatch
RTNETLINK answers: No route to host
Reported-by: idaifish <idaifish@gmail.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: b61798130f1b ("net: ipv4: RTM_GETROUTE: return matched fib result when requested")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzcaller reported the following use-after-free issue in rt6_select():
BUG: KASAN: use-after-free in rt6_select net/ipv6/route.c:755 [inline] at addr ffff8800bc6994e8
BUG: KASAN: use-after-free in ip6_pol_route.isra.46+0x1429/0x1470 net/ipv6/route.c:1084 at addr ffff8800bc6994e8
Read of size 4 by task syz-executor1/439628
CPU: 0 PID: 439628 Comm: syz-executor1 Not tainted 4.3.5+ #8
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
0000000000000000 ffff88018fe435b0 ffffffff81ca384d ffff8801d3588c00
ffff8800bc699380 ffff8800bc699500 dffffc0000000000 ffff8801d40a47c0
ffff88018fe435d8 ffffffff81735751 ffff88018fe43660 ffff8800bc699380
Call Trace:
[<ffffffff81ca384d>] __dump_stack lib/dump_stack.c:15 [inline]
[<ffffffff81ca384d>] dump_stack+0xc1/0x124 lib/dump_stack.c:51
sctp: [Deprecated]: syz-executor0 (pid 439615) Use of struct sctp_assoc_value in delayed_ack socket option.
Use struct sctp_sack_info instead
[<ffffffff81735751>] kasan_object_err+0x21/0x70 mm/kasan/report.c:158
[<ffffffff817359c4>] print_address_description mm/kasan/report.c:196 [inline]
[<ffffffff817359c4>] kasan_report_error+0x1b4/0x4a0 mm/kasan/report.c:285
[<ffffffff81735d93>] kasan_report mm/kasan/report.c:305 [inline]
[<ffffffff81735d93>] __asan_report_load4_noabort+0x43/0x50 mm/kasan/report.c:325
[<ffffffff82a28e39>] rt6_select net/ipv6/route.c:755 [inline]
[<ffffffff82a28e39>] ip6_pol_route.isra.46+0x1429/0x1470 net/ipv6/route.c:1084
[<ffffffff82a28fb1>] ip6_pol_route_output+0x81/0xb0 net/ipv6/route.c:1203
[<ffffffff82ab0a50>] fib6_rule_action+0x1f0/0x680 net/ipv6/fib6_rules.c:95
[<ffffffff8265cbb6>] fib_rules_lookup+0x2a6/0x7a0 net/core/fib_rules.c:223
[<ffffffff82ab1430>] fib6_rule_lookup+0xd0/0x250 net/ipv6/fib6_rules.c:41
[<ffffffff82a22006>] ip6_route_output+0x1d6/0x2c0 net/ipv6/route.c:1224
[<ffffffff829e83d2>] ip6_dst_lookup_tail+0x4d2/0x890 net/ipv6/ip6_output.c:943
[<ffffffff829e889a>] ip6_dst_lookup_flow+0x9a/0x250 net/ipv6/ip6_output.c:1079
[<ffffffff82a9f7d8>] ip6_datagram_dst_update+0x538/0xd40 net/ipv6/datagram.c:91
[<ffffffff82aa0978>] __ip6_datagram_connect net/ipv6/datagram.c:251 [inline]
[<ffffffff82aa0978>] ip6_datagram_connect+0x518/0xe50 net/ipv6/datagram.c:272
[<ffffffff82aa1313>] ip6_datagram_connect_v6_only+0x63/0x90 net/ipv6/datagram.c:284
[<ffffffff8292f790>] inet_dgram_connect+0x170/0x1f0 net/ipv4/af_inet.c:564
[<ffffffff82565547>] SYSC_connect+0x1a7/0x2f0 net/socket.c:1582
[<ffffffff8256a649>] SyS_connect+0x29/0x30 net/socket.c:1563
[<ffffffff82c72032>] entry_SYSCALL_64_fastpath+0x12/0x17
Object at ffff8800bc699380, in cache ip6_dst_cache size: 384
The root cause of it is that in fib6_add_rt2node(), when it replaces an
existing route with the new one, it does not update fn->rr_ptr.
This commit resets fn->rr_ptr to NULL when it points to a route which is
replaced in fib6_add_rt2node().
Fixes: 27596472473a ("ipv6: fix ECMP route replacement")
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KMSAN reported use of uninitialized sctp_addr->v4.sin_addr.s_addr and
sctp_addr->v6.sin6_scope_id in sctp_v6_cmp_addr() (see below).
Make sure all fields of an IPv6 address are initialized, which
guarantees that the IPv4 fields are also initialized.
==================================================================
BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0
net/sctp/ipv6.c:517
CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
01/01/2011
Call Trace:
dump_stack+0x172/0x1c0 lib/dump_stack.c:42
is_logbuf_locked mm/kmsan/kmsan.c:59 [inline]
kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938
native_save_fl arch/x86/include/asm/irqflags.h:18 [inline]
arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline]
arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline]
__msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467
sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517
sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290
sctp_transport_route+0x101/0x570 net/sctp/transport.c:292
sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651
sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871
inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762
sock_sendmsg_nosec net/socket.c:633 [inline]
sock_sendmsg net/socket.c:643 [inline]
SYSC_sendto+0x608/0x710 net/socket.c:1696
SyS_sendto+0x8a/0xb0 net/socket.c:1664
entry_SYSCALL_64_fastpath+0x13/0x94
RIP: 0033:0x44b479
RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479
RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006
RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c
R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff
R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000
origin description: ----dst_saddr@sctp_v6_get_dst
local variable created at:
sk_fullsock include/net/sock.h:2321 [inline]
inet6_sk include/linux/ipv6.h:309 [inline]
sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241
sctp_transport_route+0x101/0x570 net/sctp/transport.c:292
==================================================================
BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0
net/sctp/ipv6.c:517
CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
01/01/2011
Call Trace:
dump_stack+0x172/0x1c0 lib/dump_stack.c:42
is_logbuf_locked mm/kmsan/kmsan.c:59 [inline]
kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938
native_save_fl arch/x86/include/asm/irqflags.h:18 [inline]
arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline]
arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline]
__msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467
sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517
sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290
sctp_transport_route+0x101/0x570 net/sctp/transport.c:292
sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651
sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871
inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762
sock_sendmsg_nosec net/socket.c:633 [inline]
sock_sendmsg net/socket.c:643 [inline]
SYSC_sendto+0x608/0x710 net/socket.c:1696
SyS_sendto+0x8a/0xb0 net/socket.c:1664
entry_SYSCALL_64_fastpath+0x13/0x94
RIP: 0033:0x44b479
RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479
RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006
RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c
R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff
R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000
origin description: ----dst_saddr@sctp_v6_get_dst
local variable created at:
sk_fullsock include/net/sock.h:2321 [inline]
inet6_sk include/linux/ipv6.h:309 [inline]
sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241
sctp_transport_route+0x101/0x570 net/sctp/transport.c:292
==================================================================
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syszkaller reported use-after-free in tipc [1]
When msg->rep skb is freed, set the pointer to NULL,
so that caller does not free it again.
[1]
==================================================================
BUG: KASAN: use-after-free in skb_push+0xd4/0xe0 net/core/skbuff.c:1466
Read of size 8 at addr ffff8801c6e71e90 by task syz-executor5/4115
CPU: 1 PID: 4115 Comm: syz-executor5 Not tainted 4.13.0-rc4+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:52
print_address_description+0x73/0x250 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x24e/0x340 mm/kasan/report.c:409
__asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:430
skb_push+0xd4/0xe0 net/core/skbuff.c:1466
tipc_nl_compat_recv+0x833/0x18f0 net/tipc/netlink_compat.c:1209
genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598
genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623
netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397
genl_rcv+0x28/0x40 net/netlink/genetlink.c:634
netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline]
netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291
netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854
sock_sendmsg_nosec net/socket.c:633 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:643
sock_write_iter+0x31a/0x5d0 net/socket.c:898
call_write_iter include/linux/fs.h:1743 [inline]
new_sync_write fs/read_write.c:457 [inline]
__vfs_write+0x684/0x970 fs/read_write.c:470
vfs_write+0x189/0x510 fs/read_write.c:518
SYSC_write fs/read_write.c:565 [inline]
SyS_write+0xef/0x220 fs/read_write.c:557
entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x4512e9
RSP: 002b:00007f3bc8184c08 EFLAGS: 00000216 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 00000000004512e9
RDX: 0000000000000020 RSI: 0000000020fdb000 RDI: 0000000000000006
RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004b5e76
R13: 00007f3bc8184b48 R14: 00000000004b5e86 R15: 0000000000000000
Allocated by task 4115:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551
kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489
kmem_cache_alloc_node+0x13d/0x750 mm/slab.c:3651
__alloc_skb+0xf1/0x740 net/core/skbuff.c:219
alloc_skb include/linux/skbuff.h:903 [inline]
tipc_tlv_alloc+0x26/0xb0 net/tipc/netlink_compat.c:148
tipc_nl_compat_dumpit+0xf2/0x3c0 net/tipc/netlink_compat.c:248
tipc_nl_compat_handle net/tipc/netlink_compat.c:1130 [inline]
tipc_nl_compat_recv+0x756/0x18f0 net/tipc/netlink_compat.c:1199
genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598
genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623
netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397
genl_rcv+0x28/0x40 net/netlink/genetlink.c:634
netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline]
netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291
netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854
sock_sendmsg_nosec net/socket.c:633 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:643
sock_write_iter+0x31a/0x5d0 net/socket.c:898
call_write_iter include/linux/fs.h:1743 [inline]
new_sync_write fs/read_write.c:457 [inline]
__vfs_write+0x684/0x970 fs/read_write.c:470
vfs_write+0x189/0x510 fs/read_write.c:518
SYSC_write fs/read_write.c:565 [inline]
SyS_write+0xef/0x220 fs/read_write.c:557
entry_SYSCALL_64_fastpath+0x1f/0xbe
Freed by task 4115:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524
__cache_free mm/slab.c:3503 [inline]
kmem_cache_free+0x77/0x280 mm/slab.c:3763
kfree_skbmem+0x1a1/0x1d0 net/core/skbuff.c:622
__kfree_skb net/core/skbuff.c:682 [inline]
kfree_skb+0x165/0x4c0 net/core/skbuff.c:699
tipc_nl_compat_dumpit+0x36a/0x3c0 net/tipc/netlink_compat.c:260
tipc_nl_compat_handle net/tipc/netlink_compat.c:1130 [inline]
tipc_nl_compat_recv+0x756/0x18f0 net/tipc/netlink_compat.c:1199
genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598
genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623
netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397
genl_rcv+0x28/0x40 net/netlink/genetlink.c:634
netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline]
netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291
netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854
sock_sendmsg_nosec net/socket.c:633 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:643
sock_write_iter+0x31a/0x5d0 net/socket.c:898
call_write_iter include/linux/fs.h:1743 [inline]
new_sync_write fs/read_write.c:457 [inline]
__vfs_write+0x684/0x970 fs/read_write.c:470
vfs_write+0x189/0x510 fs/read_write.c:518
SYSC_write fs/read_write.c:565 [inline]
SyS_write+0xef/0x220 fs/read_write.c:557
entry_SYSCALL_64_fastpath+0x1f/0xbe
The buggy address belongs to the object at ffff8801c6e71dc0
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 208 bytes inside of
224-byte region [ffff8801c6e71dc0, ffff8801c6e71ea0)
The buggy address belongs to the page:
page:ffffea00071b9c40 count:1 mapcount:0 mapping:ffff8801c6e71000 index:0x0
flags: 0x200000000000100(slab)
raw: 0200000000000100 ffff8801c6e71000 0000000000000000 000000010000000c
raw: ffffea0007224a20 ffff8801d98caf48 ffff8801d9e79040 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801c6e71d80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
ffff8801c6e71e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8801c6e71e80: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff8801c6e71f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8801c6e71f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Due to commit e6afc8ace6dd5cef5e812f26c72579da8806f5ac ("udp: remove
headers from UDP packets before queueing"), when udp packets are being
peeked the requested extra offset is always 0 as there is no need to skip
the udp header. However, when the offset is 0 and the next skb is
of length 0, it is only returned once. The behaviour can be seen with
the following python script:
from socket import *;
f=socket(AF_INET6, SOCK_DGRAM | SOCK_NONBLOCK, 0);
g=socket(AF_INET6, SOCK_DGRAM | SOCK_NONBLOCK, 0);
f.bind(('::', 0));
addr=('::1', f.getsockname()[1]);
g.sendto(b'', addr)
g.sendto(b'b', addr)
print(f.recvfrom(10, MSG_PEEK));
print(f.recvfrom(10, MSG_PEEK));
Where the expected output should be the empty string twice.
Instead, make sk_peek_offset return negative values, and pass those values
to __skb_try_recv_datagram/__skb_try_recv_from_queue. If the passed offset
to __skb_try_recv_from_queue is negative, the checked skb is never skipped.
__skb_try_recv_from_queue will then ensure the offset is reset back to 0
if a peek is requested without an offset, unless no packets are found.
Also simplify the if condition in __skb_try_recv_from_queue. If _off is
greater then 0, and off is greater then or equal to skb->len, then
(_off || skb->len) must always be true assuming skb->len >= 0 is always
true.
Also remove a redundant check around a call to sk_peek_offset in af_unix.c,
as it double checked if MSG_PEEK was set in the flags.
V2:
- Moved the negative fixup into __skb_try_recv_from_queue, and remove now
redundant checks
- Fix peeking in udp{,v6}_recvmsg to report the right value when the
offset is 0
V3:
- Marked new branch in __skb_try_recv_from_queue as unlikely.
Signed-off-by: Matthew Dawson <matthew@mjdsystems.ca>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The dereference before check is wrong and leads to an oops when
p_filter_chain is NULL. The check needs to be done on the pointer to
prevent NULL dereference.
Fixes: f93e1cdcf42c ("net/sched: fix filter flushing")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While working on yet another syzkaller report, I found
that our IP_MAX_MTU enforcements were not properly done.
gcc seems to reload dev->mtu for min(dev->mtu, IP_MAX_MTU), and
final result can be bigger than IP_MAX_MTU :/
This is a problem because device mtu can be changed on other cpus or
threads.
While this patch does not fix the issue I am working on, it is
probably worth addressing it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syszkaller team reported another problem in DCCP [1]
Problem here is that the structure holding RTO timer
(ccid2_hc_tx_rto_expire() handler) is freed too soon.
We can not use del_timer_sync() to cancel the timer
since this timer wants to grab socket lock (that would risk a dead lock)
Solution is to defer the freeing of memory when all references to
the socket were released. Socket timers do own a reference, so this
should fix the issue.
[1]
==================================================================
BUG: KASAN: use-after-free in ccid2_hc_tx_rto_expire+0x51c/0x5c0 net/dccp/ccids/ccid2.c:144
Read of size 4 at addr ffff8801d2660540 by task kworker/u4:7/3365
CPU: 1 PID: 3365 Comm: kworker/u4:7 Not tainted 4.13.0-rc4+ #3
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events_unbound call_usermodehelper_exec_work
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:52
print_address_description+0x73/0x250 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x24e/0x340 mm/kasan/report.c:409
__asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:429
ccid2_hc_tx_rto_expire+0x51c/0x5c0 net/dccp/ccids/ccid2.c:144
call_timer_fn+0x233/0x830 kernel/time/timer.c:1268
expire_timers kernel/time/timer.c:1307 [inline]
__run_timers+0x7fd/0xb90 kernel/time/timer.c:1601
run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614
__do_softirq+0x2f5/0xba3 kernel/softirq.c:284
invoke_softirq kernel/softirq.c:364 [inline]
irq_exit+0x1cc/0x200 kernel/softirq.c:405
exiting_irq arch/x86/include/asm/apic.h:638 [inline]
smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:1044
apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:702
RIP: 0010:arch_local_irq_enable arch/x86/include/asm/paravirt.h:824 [inline]
RIP: 0010:__raw_write_unlock_irq include/linux/rwlock_api_smp.h:267 [inline]
RIP: 0010:_raw_write_unlock_irq+0x56/0x70 kernel/locking/spinlock.c:343
RSP: 0018:ffff8801cd50eaa8 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff10
RAX: dffffc0000000000 RBX: ffffffff85a090c0 RCX: 0000000000000006
RDX: 1ffffffff0b595f3 RSI: 1ffff1003962f989 RDI: ffffffff85acaf98
RBP: ffff8801cd50eab0 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801cc96ea60
R13: dffffc0000000000 R14: ffff8801cc96e4c0 R15: ffff8801cc96e4c0
</IRQ>
release_task+0xe9e/0x1a40 kernel/exit.c:220
wait_task_zombie kernel/exit.c:1162 [inline]
wait_consider_task+0x29b8/0x33c0 kernel/exit.c:1389
do_wait_thread kernel/exit.c:1452 [inline]
do_wait+0x441/0xa90 kernel/exit.c:1523
kernel_wait4+0x1f5/0x370 kernel/exit.c:1665
SYSC_wait4+0x134/0x140 kernel/exit.c:1677
SyS_wait4+0x2c/0x40 kernel/exit.c:1673
call_usermodehelper_exec_sync kernel/kmod.c:286 [inline]
call_usermodehelper_exec_work+0x1a0/0x2c0 kernel/kmod.c:323
process_one_work+0xbf3/0x1bc0 kernel/workqueue.c:2097
worker_thread+0x223/0x1860 kernel/workqueue.c:2231
kthread+0x35e/0x430 kernel/kthread.c:231
ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:425
Allocated by task 21267:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551
kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489
kmem_cache_alloc+0x127/0x750 mm/slab.c:3561
ccid_new+0x20e/0x390 net/dccp/ccid.c:151
dccp_hdlr_ccid+0x27/0x140 net/dccp/feat.c:44
__dccp_feat_activate+0x142/0x2a0 net/dccp/feat.c:344
dccp_feat_activate_values+0x34e/0xa90 net/dccp/feat.c:1538
dccp_rcv_request_sent_state_process net/dccp/input.c:472 [inline]
dccp_rcv_state_process+0xed1/0x1620 net/dccp/input.c:677
dccp_v4_do_rcv+0xeb/0x160 net/dccp/ipv4.c:679
sk_backlog_rcv include/net/sock.h:911 [inline]
__release_sock+0x124/0x360 net/core/sock.c:2269
release_sock+0xa4/0x2a0 net/core/sock.c:2784
inet_wait_for_connect net/ipv4/af_inet.c:557 [inline]
__inet_stream_connect+0x671/0xf00 net/ipv4/af_inet.c:643
inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:682
SYSC_connect+0x204/0x470 net/socket.c:1642
SyS_connect+0x24/0x30 net/socket.c:1623
entry_SYSCALL_64_fastpath+0x1f/0xbe
Freed by task 3049:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524
__cache_free mm/slab.c:3503 [inline]
kmem_cache_free+0x77/0x280 mm/slab.c:3763
ccid_hc_tx_delete+0xc5/0x100 net/dccp/ccid.c:190
dccp_destroy_sock+0x1d1/0x2b0 net/dccp/proto.c:225
inet_csk_destroy_sock+0x166/0x3f0 net/ipv4/inet_connection_sock.c:833
dccp_done+0xb7/0xd0 net/dccp/proto.c:145
dccp_time_wait+0x13d/0x300 net/dccp/minisocks.c:72
dccp_rcv_reset+0x1d1/0x5b0 net/dccp/input.c:160
dccp_rcv_state_process+0x8fc/0x1620 net/dccp/input.c:663
dccp_v4_do_rcv+0xeb/0x160 net/dccp/ipv4.c:679
sk_backlog_rcv include/net/sock.h:911 [inline]
__sk_receive_skb+0x33e/0xc00 net/core/sock.c:521
dccp_v4_rcv+0xef1/0x1c00 net/dccp/ipv4.c:871
ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216
NF_HOOK include/linux/netfilter.h:248 [inline]
ip_local_deliver+0x1ce/0x6d0 net/ipv4/ip_input.c:257
dst_input include/net/dst.h:477 [inline]
ip_rcv_finish+0x8db/0x19c0 net/ipv4/ip_input.c:397
NF_HOOK include/linux/netfilter.h:248 [inline]
ip_rcv+0xc3f/0x17d0 net/ipv4/ip_input.c:488
__netif_receive_skb_core+0x19af/0x33d0 net/core/dev.c:4417
__netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4455
process_backlog+0x203/0x740 net/core/dev.c:5130
napi_poll net/core/dev.c:5527 [inline]
net_rx_action+0x792/0x1910 net/core/dev.c:5593
__do_softirq+0x2f5/0xba3 kernel/softirq.c:284
The buggy address belongs to the object at ffff8801d2660100
which belongs to the cache ccid2_hc_tx_sock of size 1240
The buggy address is located 1088 bytes inside of
1240-byte region [ffff8801d2660100, ffff8801d26605d8)
The buggy address belongs to the page:
page:ffffea0007499800 count:1 mapcount:0 mapping:ffff8801d2660100 index:0x0 compound_mapcount: 0
flags: 0x200000000008100(slab|head)
raw: 0200000000008100 ffff8801d2660100 0000000000000000 0000000100000005
raw: ffffea00075271a0 ffffea0007538820 ffff8801d3aef9c0 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801d2660400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8801d2660480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8801d2660500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8801d2660580: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
ffff8801d2660600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For sw_flow_actions, the actions_len only represents the kernel part's
size, and when we dump the actions to the userspace, we will do the
convertions, so it's true size may become bigger than the actions_len.
But unfortunately, for OVS_PACKET_ATTR_ACTIONS, we use the actions_len
to alloc the skbuff, so the user_skb's size may become insufficient and
oops will happen like this:
skbuff: skb_over_panic: text:ffffffff8148fabf len:1749 put:157 head:
ffff881300f39000 data:ffff881300f39000 tail:0x6d5 end:0x6c0 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:129!
[...]
Call Trace:
<IRQ>
[<ffffffff8148be82>] skb_put+0x43/0x44
[<ffffffff8148fabf>] skb_zerocopy+0x6c/0x1f4
[<ffffffffa0290d36>] queue_userspace_packet+0x3a3/0x448 [openvswitch]
[<ffffffffa0292023>] ovs_dp_upcall+0x30/0x5c [openvswitch]
[<ffffffffa028d435>] output_userspace+0x132/0x158 [openvswitch]
[<ffffffffa01e6890>] ? ip6_rcv_finish+0x74/0x77 [ipv6]
[<ffffffffa028e277>] do_execute_actions+0xcc1/0xdc8 [openvswitch]
[<ffffffffa028e3f2>] ovs_execute_actions+0x74/0x106 [openvswitch]
[<ffffffffa0292130>] ovs_dp_process_packet+0xe1/0xfd [openvswitch]
[<ffffffffa0292b77>] ? key_extract+0x63c/0x8d5 [openvswitch]
[<ffffffffa029848b>] ovs_vport_receive+0xa1/0xc3 [openvswitch]
[...]
Also we can find that the actions_len is much little than the orig_len:
crash> struct sw_flow_actions 0xffff8812f539d000
struct sw_flow_actions {
rcu = {
next = 0xffff8812f5398800,
func = 0xffffe3b00035db32
},
orig_len = 1384,
actions_len = 592,
actions = 0xffff8812f539d01c
}
So as a quick fix, use the orig_len instead of the actions_len to alloc
the user_skb.
Last, this oops happened on our system running a relative old kernel, but
the same risk still exists on the mainline, since we use the wrong
actions_len from the beginning.
Fixes: ccea74457bbd ("openvswitch: include datapath actions with sampled-packet upcall to userspace")
Cc: Neil McKee <neil.mckee@inmon.com>
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Anuradha reported that statically added groups for interfaces enslaved
to a VRF device were not persisting. The problem is that igmp queries
and reports need to use the data in the in_dev for the real ingress
device rather than the VRF device. Update igmp_rcv accordingly.
Fixes: e58e41596811 ("net: Enable support for VRF with ipv4 multicast")
Reported-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It was added in commit e57a784d8cae ("pkt_sched: set root qdisc
before change() in attach_default_qdiscs()") to hide duplicates
from "tc qdisc show" for incative deivices.
After 59cc1f61f ("net: sched: convert qdisc linked list to hashtable")
it triggered when classful qdisc is added to inactive device because
default qdiscs are added before switching root qdisc.
Anyway after commit ea3274695353 ("net: sched: avoid duplicates in
qdisc dump") duplicates are filtered right in dumper.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When sfq_enqueue() drops head packet or packet from another queue it
have to update backlog at upper qdiscs too.
Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Traffic filters could keep direct pointers to classes in classful qdisc,
thus qdisc destruction first removes all filters before freeing classes.
Class destruction methods also tries to free attached filters but now
this isn't safe because tcf_block_put() unlike to tcf_destroy_chain()
cannot be called second time.
This patch set class->block to NULL after first tcf_block_put() and
turn second call into no-op.
Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If fi->fib_metrics could not be allocated in fib_create_info()
we attempt to dereference a NULL pointer in free_fib_info_rcu() :
m = fi->fib_metrics;
if (m != &dst_default_metrics && atomic_dec_and_test(&m->refcnt))
kfree(m);
Before my recent patch, we used to call kfree(NULL) and nothing wrong
happened.
Instead of using RCU to defer freeing while we are under memory stress,
it seems better to take immediate action.
This was reported by syzkaller team.
Fixes: 3fb07daff8e9 ("ipv4: add reference counting to metrics")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Based on a syzkaller report [1], I found that a per cpu allocation
failure in snmp6_alloc_dev() would then lead to NULL dereference in
ip6_route_dev_notify().
It seems this is a very old bug, thus no Fixes tag in this submission.
Let's add in6_dev_put_clear() helper, as we will probably use
it elsewhere (once available/present in net-next)
[1]
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 17294 Comm: syz-executor6 Not tainted 4.13.0-rc2+ #10
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: ffff88019f456680 task.stack: ffff8801c6e58000
RIP: 0010:__read_once_size include/linux/compiler.h:250 [inline]
RIP: 0010:atomic_read arch/x86/include/asm/atomic.h:26 [inline]
RIP: 0010:refcount_sub_and_test+0x7d/0x1b0 lib/refcount.c:178
RSP: 0018:ffff8801c6e5f1b0 EFLAGS: 00010202
RAX: 0000000000000037 RBX: dffffc0000000000 RCX: ffffc90005d25000
RDX: ffff8801c6e5f218 RSI: ffffffff82342bbf RDI: 0000000000000001
RBP: ffff8801c6e5f240 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff10038dcbe37
R13: 0000000000000006 R14: 0000000000000001 R15: 00000000000001b8
FS: 00007f21e0429700(0000) GS:ffff8801dc100000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001ddbc22000 CR3: 00000001d632b000 CR4: 00000000001426e0
DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
Call Trace:
refcount_dec_and_test+0x1a/0x20 lib/refcount.c:211
in6_dev_put include/net/addrconf.h:335 [inline]
ip6_route_dev_notify+0x1c9/0x4a0 net/ipv6/route.c:3732
notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1678
call_netdevice_notifiers net/core/dev.c:1694 [inline]
rollback_registered_many+0x91c/0xe80 net/core/dev.c:7107
rollback_registered+0x1be/0x3c0 net/core/dev.c:7149
register_netdevice+0xbcd/0xee0 net/core/dev.c:7587
register_netdev+0x1a/0x30 net/core/dev.c:7669
loopback_net_init+0x76/0x160 drivers/net/loopback.c:214
ops_init+0x10a/0x570 net/core/net_namespace.c:118
setup_net+0x313/0x710 net/core/net_namespace.c:294
copy_net_ns+0x27c/0x580 net/core/net_namespace.c:418
create_new_namespaces+0x425/0x880 kernel/nsproxy.c:107
unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:206
SYSC_unshare kernel/fork.c:2347 [inline]
SyS_unshare+0x653/0xfa0 kernel/fork.c:2297
entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x4512c9
RSP: 002b:00007f21e0428c08 EFLAGS: 00000216 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 0000000000718150 RCX: 00000000004512c9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000062020200
RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004b973d
R13: 00000000ffffffff R14: 000000002001d000 R15: 00000000000002dd
Code: 50 2b 34 82 c7 00 f1 f1 f1 f1 c7 40 04 04 f2 f2 f2 c7 40 08 f3 f3
f3 f3 e8 a1 43 39 ff 4c 89 f8 48 8b 95 70 ff ff ff 48 c1 e8 03 <0f> b6
0c 18 4c 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85
RIP: __read_once_size include/linux/compiler.h:250 [inline] RSP:
ffff8801c6e5f1b0
RIP: atomic_read arch/x86/include/asm/atomic.h:26 [inline] RSP:
ffff8801c6e5f1b0
RIP: refcount_sub_and_test+0x7d/0x1b0 lib/refcount.c:178 RSP:
ffff8801c6e5f1b0
---[ end trace e441d046c6410d31 ]---
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.13
This time quite a few fixes for iwlwifi and one major regression fix
for brcmfmac. For the iwlwifi aggregation bug a small change was
needed for mac80211, but as Johannes is still away the mac80211 patch
is taken via wireless-drivers tree.
brcmfmac
* fix firmware crash (a recent regression in bcm4343{0,1,8}
iwlwifi
* Some simple PCI HW ID fix-ups and additions for family 9000
* Remove a bogus warning message with new FWs (bug #196915)
* Don't allow illegal channel options to be used (bug #195299)
* A fix for checksum offload in family 9000
* A fix serious throughput degradation in 11ac with multiple streams
* An old bug in SMPS where the firmware was not aware of SMPS changes
* Fix a memory leak in the SAR code
* Fix a stuck queue case in AP mode;
* Convert a WARN to a simple debug in a legitimate race case (from
which we can recover)
* Fix a severe throughput aggregation on 9000-family devices due to
aggregation issues, needed a small change in mac80211
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Filtering the ACK packet was not put at the right place.
At this place, we already allocated a child and put it
into accept queue.
We absolutely need to call tcp_child_process() to release
its spinlock, or we will deadlock at accept() or close() time.
Found by syzkaller team (Thanks a lot !)
Fixes: 8fac365f63c8 ("tcp: Add a tcp_filter hook before handle ack packet")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Chenbo Feng <fengc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzkaller reported that DCCP could have a non empty
write queue at dismantle time.
WARNING: CPU: 1 PID: 2953 at net/core/stream.c:199 sk_stream_kill_queues+0x3ce/0x520 net/core/stream.c:199
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 2953 Comm: syz-executor0 Not tainted 4.13.0-rc4+ #2
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:52
panic+0x1e4/0x417 kernel/panic.c:180
__warn+0x1c4/0x1d9 kernel/panic.c:541
report_bug+0x211/0x2d0 lib/bug.c:183
fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190
do_trap_no_signal arch/x86/kernel/traps.c:224 [inline]
do_trap+0x260/0x390 arch/x86/kernel/traps.c:273
do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:310
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323
invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:846
RIP: 0010:sk_stream_kill_queues+0x3ce/0x520 net/core/stream.c:199
RSP: 0018:ffff8801d182f108 EFLAGS: 00010297
RAX: ffff8801d1144140 RBX: ffff8801d13cb280 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff85137b00 RDI: ffff8801d13cb280
RBP: ffff8801d182f148 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801d13cb4d0
R13: ffff8801d13cb3b8 R14: ffff8801d13cb300 R15: ffff8801d13cb3b8
inet_csk_destroy_sock+0x175/0x3f0 net/ipv4/inet_connection_sock.c:835
dccp_close+0x84d/0xc10 net/dccp/proto.c:1067
inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425
sock_release+0x8d/0x1e0 net/socket.c:597
sock_close+0x16/0x20 net/socket.c:1126
__fput+0x327/0x7e0 fs/file_table.c:210
____fput+0x15/0x20 fs/file_table.c:246
task_work_run+0x18a/0x260 kernel/task_work.c:116
exit_task_work include/linux/task_work.h:21 [inline]
do_exit+0xa32/0x1b10 kernel/exit.c:865
do_group_exit+0x149/0x400 kernel/exit.c:969
get_signal+0x7e8/0x17e0 kernel/signal.c:2330
do_signal+0x94/0x1ee0 arch/x86/kernel/signal.c:808
exit_to_usermode_loop+0x21c/0x2d0 arch/x86/entry/common.c:157
prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
syscall_return_slowpath+0x3a7/0x450 arch/x86/entry/common.c:263
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a dst is created by addrconf_dst_alloc() for a host route or an
anycast route, dst->dev points to loopback dev while rt6->rt6i_idev
points to a real device.
When the real device goes down, the current cleanup code only checks for
dst->dev and assumes rt6->rt6i_idev->dev is the same. This causes the
refcount leak on the real device in the above situation.
This patch makes sure to always release the refcount taken on
rt6->rt6i_idev during dst_dev_put().
Fixes: 587fea741134 ("ipv6: mark DST_NOGC and remove the operation of
dst_free()")
Reported-by: John Stultz <john.stultz@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pfkey_broadcast() might be called from non process contexts,
we can not use GFP_KERNEL in these cases [1].
This patch partially reverts commit ba51b6be38c1 ("net: Fix RCU splat in
af_key"), only keeping the GFP_ATOMIC forcing under rcu_read_lock()
section.
[1] : syzkaller reported :
in_atomic(): 1, irqs_disabled(): 0, pid: 2932, name: syzkaller183439
3 locks held by syzkaller183439/2932:
#0: (&net->xfrm.xfrm_cfg_mutex){+.+.+.}, at: [<ffffffff83b43888>] pfkey_sendmsg+0x4c8/0x9f0 net/key/af_key.c:3649
#1: (&pfk->dump_lock){+.+.+.}, at: [<ffffffff83b467f6>] pfkey_do_dump+0x76/0x3f0 net/key/af_key.c:293
#2: (&(&net->xfrm.xfrm_policy_lock)->rlock){+...+.}, at: [<ffffffff83957632>] spin_lock_bh include/linux/spinlock.h:304 [inline]
#2: (&(&net->xfrm.xfrm_policy_lock)->rlock){+...+.}, at: [<ffffffff83957632>] xfrm_policy_walk+0x192/0xa30 net/xfrm/xfrm_policy.c:1028
CPU: 0 PID: 2932 Comm: syzkaller183439 Not tainted 4.13.0-rc4+ #24
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:52
___might_sleep+0x2b2/0x470 kernel/sched/core.c:5994
__might_sleep+0x95/0x190 kernel/sched/core.c:5947
slab_pre_alloc_hook mm/slab.h:416 [inline]
slab_alloc mm/slab.c:3383 [inline]
kmem_cache_alloc+0x24b/0x6e0 mm/slab.c:3559
skb_clone+0x1a0/0x400 net/core/skbuff.c:1037
pfkey_broadcast_one+0x4b2/0x6f0 net/key/af_key.c:207
pfkey_broadcast+0x4ba/0x770 net/key/af_key.c:281
dump_sp+0x3d6/0x500 net/key/af_key.c:2685
xfrm_policy_walk+0x2f1/0xa30 net/xfrm/xfrm_policy.c:1042
pfkey_dump_sp+0x42/0x50 net/key/af_key.c:2695
pfkey_do_dump+0xaa/0x3f0 net/key/af_key.c:299
pfkey_spddump+0x1a0/0x210 net/key/af_key.c:2722
pfkey_process+0x606/0x710 net/key/af_key.c:2814
pfkey_sendmsg+0x4d6/0x9f0 net/key/af_key.c:3650
sock_sendmsg_nosec net/socket.c:633 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:643
___sys_sendmsg+0x755/0x890 net/socket.c:2035
__sys_sendmsg+0xe5/0x210 net/socket.c:2069
SYSC_sendmsg net/socket.c:2080 [inline]
SyS_sendmsg+0x2d/0x50 net/socket.c:2076
entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x445d79
RSP: 002b:00007f32447c1dc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000445d79
RDX: 0000000000000000 RSI: 000000002023dfc8 RDI: 0000000000000008
RBP: 0000000000000086 R08: 00007f32447c2700 R09: 00007f32447c2700
R10: 00007f32447c2700 R11: 0000000000000202 R12: 0000000000000000
R13: 00007ffe33edec4f R14: 00007f32447c29c0 R15: 0000000000000000
Fixes: ba51b6be38c1 ("net: Fix RCU splat in af_key")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__tcp_ulp_find_autoload returns tcp_ulp_ops after taking a reference on
the module. Then, if ->init fails, tcp_set_ulp propagates the error but
nothing releases that reference.
Fixes: 734942cc4ea6 ("tcp: ULP infrastructure")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the function msg_reverse(), we reverse the header while trying to
reuse the original buffer whenever possible. Those rejected/returned
messages are always transmitted as unicast, but the msg_non_seq field
is not explicitly set to zero as it should be.
We have seen cases where multicast senders set the message type to
"NOT dest_droppable", meaning that a multicast message shorter than
one MTU will be returned, e.g., during receive buffer overflow, by
reusing the original buffer. This has the effect that even the
'msg_non_seq' field is inadvertently inherited by the rejected message,
although it is now sent as a unicast message. This again leads the
receiving unicast link endpoint to steer the packet toward the broadcast
link receive function, where it is dropped. The affected unicast link is
thereafter (after 100 failed retransmissions) declared 'stale' and
reset.
We fix this by unconditionally setting the 'msg_non_seq' flag to zero
for all rejected/returned messages.
Reported-by: Canh Duc Luu <canh.d.luu@dektech.com.au>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On L2 bearers, the TIPC broadcast function is sending out packets using
the corresponding L2 broadcast address. At reception, we filter such
packets under the assumption that they will also be delivered as
broadcast packets.
This assumption doesn't always hold true. Under high load, we have seen
that a switch may convert the destination address and deliver the packet
as a PACKET_MULTICAST, something leading to inadvertently dropped
packets and a stale and reset broadcast link.
We fix this by extending the reception filtering to accept packets of
type PACKET_MULTICAST.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
"ip route get $daddr iif eth0 from $saddr" causes:
BUG: KASAN: use-after-free in ip_route_input_rcu+0x1535/0x1b50
Call Trace:
ip_route_input_rcu+0x1535/0x1b50
ip_route_input_noref+0xf9/0x190
tcp_v4_early_demux+0x1a4/0x2b0
ip_rcv+0xbcb/0xc05
__netif_receive_skb+0x9c/0xd0
netif_receive_skb_internal+0x5a8/0x890
Problem is that inet_rtm_getroute calls either ip_route_input_rcu (if an
iif was provided) or ip_route_output_key_hash_rcu.
But ip_route_input_rcu, unlike ip_route_output_key_hash_rcu, already
associates the dst_entry with the skb. This clears the SKB_DST_NOREF
bit (i.e. skb_dst_drop will release/free the entry while it should not).
Thus only set the dst if we called ip_route_output_key_hash_rcu().
I tested this patch by running:
while true;do ip r get 10.0.1.2;done > /dev/null &
while true;do ip r get 10.0.1.2 iif eth0 from 10.0.1.1;done > /dev/null &
... and saw no crash or memory leak.
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: David Ahern <dsahern@gmail.com>
Fixes: ba52d61e0ff ("ipv4: route: restore skb_dst_set in inet_rtm_getroute")
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When CONFIG_NET_SCHED or CONFIG_NET_RX_BUSY_POLL is /not/ set and
we try a narrow __sk_buff load of tc_index or napi_id, respectively,
then verifier rightfully complains that it's misconfigured, because
we need to set target_size in each of the two cases. The rewrite
for the ctx access is just a dummy op, but needs to pass, so fix
this up.
Fixes: f96da09473b5 ("bpf: simplify narrower ctx access")
Reported-by: Shubham Bansal <illusionist.neo@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Without this filters cannot be attached.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure")
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The DSA layer frees the original skb when an xmit function returns NULL,
meaning an error occurred. But if the tagging code copied the original
skb, it is responsible of freeing the copy if an error occurs.
The ksz tagging code currently has two issues: if skb_put_padto fails,
the skb copy is not freed, and the original skb will be freed twice.
To fix that, move skb_put_padto inside both branches of the skb_tailroom
condition, before freeing the original skb, and free the copy on error.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Updates to tp_reserve can race with reads of the field in
packet_set_ring. Avoid this by holding the socket lock during
updates in setsockopt PACKET_RESERVE.
This bug was discovered by syzkaller.
Fixes: 8913336a7e8d ("packet: add PACKET_RESERVE sockopt")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
