summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2017-05-20Bluetooth: Fix user channel for 32bit userspace on 64bit kernelSzymon Janc1-1/+2
commit ab89f0bdd63a3721f7cd3f064f39fc4ac7ca14d4 upstream. Running 32bit userspace on 64bit kernel results in MSG_CMSG_COMPAT being defined as 0x80000000. This results in sendmsg failure if used from 32bit userspace running on 64bit kernel. Fix this by accounting for MSG_CMSG_COMPAT in flags check in hci_sock_sendmsg. Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marko Kiiskila <marko@runtime.io> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20iov_iter: don't revert iov buffer if csum errorDing Tianhong1-6/+7
commit a6a5993243550b09f620941dea741b7421fdf79c upstream. The patch 327868212381 (make skb_copy_datagram_msg() et.al. preserve ->msg_iter on error) will revert the iov buffer if copy to iter failed, but it didn't copy any datagram if the skb_checksum_complete error, so no need to revert any data at this place. v2: Sabrina notice that return -EFAULT when checksum error is not correct here, it would confuse the caller about the return value, so fix it. Fixes: 327868212381 ("make skb_copy_datagram_msg() et.al. preserve->msg_iter on error") Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14tcp: randomize timestamps on syncookiesEric Dumazet6-48/+80
[ Upstream commit 84b114b98452c431299d99c135f751659e517acb ] Whole point of randomization was to hide server uptime, but an attacker can simply start a syn flood and TCP generates 'old style' timestamps, directly revealing server jiffies value. Also, TSval sent by the server to a particular remote address vary depending on syncookies being sent or not, potentially triggering PAWS drops for innocent clients. Lets implement proper randomization, including for SYNcookies. Also we do not need to export sysctl_tcp_timestamps, since it is not used from a module. In v2, I added Florian feedback and contribution, adding tsoff to tcp_get_cookie_sock(). v3 removed one unused variable in tcp_v4_connect() as Florian spotted. Fixes: 95a22caee396c ("tcp: randomize tcp timestamp offsets for each connection") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Florian Westphal <fw@strlen.de> Tested-by: Florian Westphal <fw@strlen.de> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notfWANG Cong2-2/+12
[ Upstream commit 242d3a49a2a1a71d8eb9f953db1bcaa9d698ce00 ] For each netns (except init_net), we initialize its null entry in 3 places: 1) The template itself, as we use kmemdup() 2) Code around dst_init_metrics() in ip6_route_net_init() 3) ip6_route_dev_notify(), which is supposed to initialize it after loopback registers Unfortunately the last one still happens in a wrong order because we expect to initialize net->ipv6.ip6_null_entry->rt6i_idev to net->loopback_dev's idev, thus we have to do that after we add idev to loopback. However, this notifier has priority == 0 same as ipv6_dev_notf, and ipv6_dev_notf is registered after ip6_route_dev_notifier so it is called actually after ip6_route_dev_notifier. This is similar to commit 2f460933f58e ("ipv6: initialize route null entry in addrconf_init()") which fixes init_net. Fix it by picking a smaller priority for ip6_route_dev_notifier. Also, we have to release the refcnt accordingly when unregistering loopback_dev because device exit functions are called before subsys exit functions. Acked-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14ipv6: initialize route null entry in addrconf_init()WANG Cong2-11/+17
[ Upstream commit 2f460933f58eee3393aba64f0f6d14acb08d1724 ] Andrey reported a crash on init_net.ipv6.ip6_null_entry->rt6i_idev since it is always NULL. This is clearly wrong, we have code to initialize it to loopback_dev, unfortunately the order is still not correct. loopback_dev is registered very early during boot, we lose a chance to re-initialize it in notifier. addrconf_init() is called after ip6_route_init(), which means we have no chance to correct it. Fix it by moving this initialization explicitly after ipv6_add_dev(init_net.loopback_dev) in addrconf_init(). Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14rtnetlink: NUL-terminate IFLA_PHYS_PORT_NAME stringMichal Schmidt1-1/+1
[ Upstream commit 77ef033b687c3e030017c94a29bf6ea3aaaef678 ] IFLA_PHYS_PORT_NAME is a string attribute, so terminate it with \0. Otherwise libnl3 fails to validate netlink messages with this attribute. "ip -detail a" assumes too that the attribute is NUL-terminated when printing it. It often was, due to padding. I noticed this as libvirtd failing to start on a system with sfc driver after upgrading it to Linux 4.11, i.e. when sfc added support for phys_port_name. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14ipv4, ipv6: ensure raw socket message is big enough to hold an IP headerAlexander Potapenko2-0/+5
[ Upstream commit 86f4c90a1c5c1493f07f2d12c1079f5bf01936f2 ] raw_send_hdrinc() and rawv6_send_hdrinc() expect that the buffer copied from the userspace contains the IPv4/IPv6 header, so if too few bytes are copied, parts of the header may remain uninitialized. This bug has been detected with KMSAN. For the record, the KMSAN report: ================================================================== BUG: KMSAN: use of unitialized memory in nf_ct_frag6_gather+0xf5a/0x44a0 inter: 0 CPU: 0 PID: 1036 Comm: probe Not tainted 4.11.0-rc5+ #2455 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x143/0x1b0 lib/dump_stack.c:52 kmsan_report+0x16b/0x1e0 mm/kmsan/kmsan.c:1078 __kmsan_warning_32+0x5c/0xa0 mm/kmsan/kmsan_instr.c:510 nf_ct_frag6_gather+0xf5a/0x44a0 net/ipv6/netfilter/nf_conntrack_reasm.c:577 ipv6_defrag+0x1d9/0x280 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68 nf_hook_entry_hookfn ./include/linux/netfilter.h:102 nf_hook_slow+0x13f/0x3c0 net/netfilter/core.c:310 nf_hook ./include/linux/netfilter.h:212 NF_HOOK ./include/linux/netfilter.h:255 rawv6_send_hdrinc net/ipv6/raw.c:673 rawv6_sendmsg+0x2fcb/0x41a0 net/ipv6/raw.c:919 inet_sendmsg+0x3f8/0x6d0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 sock_sendmsg net/socket.c:643 SYSC_sendto+0x6a5/0x7c0 net/socket.c:1696 SyS_sendto+0xbc/0xe0 net/socket.c:1664 do_syscall_64+0x72/0xa0 arch/x86/entry/common.c:285 entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:246 RIP: 0033:0x436e03 RSP: 002b:00007ffce48baf38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00000000004002b0 RCX: 0000000000436e03 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007ffce48baf90 R08: 00007ffce48baf50 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000401790 R14: 0000000000401820 R15: 0000000000000000 origin: 00000000d9400053 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:362 kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:257 kmsan_poison_shadow+0x6d/0xc0 mm/kmsan/kmsan.c:270 slab_alloc_node mm/slub.c:2735 __kmalloc_node_track_caller+0x1f4/0x390 mm/slub.c:4341 __kmalloc_reserve net/core/skbuff.c:138 __alloc_skb+0x2cd/0x740 net/core/skbuff.c:231 alloc_skb ./include/linux/skbuff.h:933 alloc_skb_with_frags+0x209/0xbc0 net/core/skbuff.c:4678 sock_alloc_send_pskb+0x9ff/0xe00 net/core/sock.c:1903 sock_alloc_send_skb+0xe4/0x100 net/core/sock.c:1920 rawv6_send_hdrinc net/ipv6/raw.c:638 rawv6_sendmsg+0x2918/0x41a0 net/ipv6/raw.c:919 inet_sendmsg+0x3f8/0x6d0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 sock_sendmsg net/socket.c:643 SYSC_sendto+0x6a5/0x7c0 net/socket.c:1696 SyS_sendto+0xbc/0xe0 net/socket.c:1664 do_syscall_64+0x72/0xa0 arch/x86/entry/common.c:285 return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:246 ================================================================== , triggered by the following syscalls: socket(PF_INET6, SOCK_RAW, IPPROTO_RAW) = 3 sendto(3, NULL, 0, 0, {sa_family=AF_INET6, sin6_port=htons(0), inet_pton(AF_INET6, "ff00::", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 28) = -1 EPERM A similar report is triggered in net/ipv4/raw.c if we use a PF_INET socket instead of a PF_INET6 one. Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14tcp: do not inherit fastopen_req from parentEric Dumazet1-0/+1
[ Upstream commit 8b485ce69876c65db12ed390e7f9c0d2a64eff2c ] Under fuzzer stress, it is possible that a child gets a non NULL fastopen_req pointer from its parent at accept() time, when/if parent morphs from listener to active session. We need to make sure this can not happen, by clearing the field after socket cloning. BUG: Double free or freeing an invalid pointer Unexpected shadow byte: 0xFB CPU: 3 PID: 20933 Comm: syz-executor3 Not tainted 4.11.0+ #306 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x292/0x395 lib/dump_stack.c:52 kasan_object_err+0x1c/0x70 mm/kasan/report.c:164 kasan_report_double_free+0x5c/0x70 mm/kasan/report.c:185 kasan_slab_free+0x9d/0xc0 mm/kasan/kasan.c:580 slab_free_hook mm/slub.c:1357 [inline] slab_free_freelist_hook mm/slub.c:1379 [inline] slab_free mm/slub.c:2961 [inline] kfree+0xe8/0x2b0 mm/slub.c:3882 tcp_free_fastopen_req net/ipv4/tcp.c:1077 [inline] tcp_disconnect+0xc15/0x13e0 net/ipv4/tcp.c:2328 inet_child_forget+0xb8/0x600 net/ipv4/inet_connection_sock.c:898 inet_csk_reqsk_queue_add+0x1e7/0x250 net/ipv4/inet_connection_sock.c:928 tcp_get_cookie_sock+0x21a/0x510 net/ipv4/syncookies.c:217 cookie_v4_check+0x1a19/0x28b0 net/ipv4/syncookies.c:384 tcp_v4_cookie_check net/ipv4/tcp_ipv4.c:1384 [inline] tcp_v4_do_rcv+0x731/0x940 net/ipv4/tcp_ipv4.c:1421 tcp_v4_rcv+0x2dc0/0x31c0 net/ipv4/tcp_ipv4.c:1715 ip_local_deliver_finish+0x4cc/0xc20 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:257 [inline] ip_local_deliver+0x1ce/0x700 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:492 [inline] ip_rcv_finish+0xb1d/0x20b0 net/ipv4/ip_input.c:396 NF_HOOK include/linux/netfilter.h:257 [inline] ip_rcv+0xd8c/0x19c0 net/ipv4/ip_input.c:487 __netif_receive_skb_core+0x1ad1/0x3400 net/core/dev.c:4210 __netif_receive_skb+0x2a/0x1a0 net/core/dev.c:4248 process_backlog+0xe5/0x6c0 net/core/dev.c:4868 napi_poll net/core/dev.c:5270 [inline] net_rx_action+0xe70/0x18e0 net/core/dev.c:5335 __do_softirq+0x2fb/0xb99 kernel/softirq.c:284 do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:899 </IRQ> do_softirq.part.17+0x1e8/0x230 kernel/softirq.c:328 do_softirq kernel/softirq.c:176 [inline] __local_bh_enable_ip+0x1cf/0x1e0 kernel/softirq.c:181 local_bh_enable include/linux/bottom_half.h:31 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:931 [inline] ip_finish_output2+0x9ab/0x15e0 net/ipv4/ip_output.c:230 ip_finish_output+0xa35/0xdf0 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:246 [inline] ip_output+0x1f6/0x7b0 net/ipv4/ip_output.c:404 dst_output include/net/dst.h:486 [inline] ip_local_out+0x95/0x160 net/ipv4/ip_output.c:124 ip_queue_xmit+0x9a8/0x1a10 net/ipv4/ip_output.c:503 tcp_transmit_skb+0x1ade/0x3470 net/ipv4/tcp_output.c:1057 tcp_write_xmit+0x79e/0x55b0 net/ipv4/tcp_output.c:2265 __tcp_push_pending_frames+0xfa/0x3a0 net/ipv4/tcp_output.c:2450 tcp_push+0x4ee/0x780 net/ipv4/tcp.c:683 tcp_sendmsg+0x128d/0x39b0 net/ipv4/tcp.c:1342 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x660/0x810 net/socket.c:1696 SyS_sendto+0x40/0x50 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x446059 RSP: 002b:00007faa6761fb58 EFLAGS: 00000282 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000017 RCX: 0000000000446059 RDX: 0000000000000001 RSI: 0000000020ba3fcd RDI: 0000000000000017 RBP: 00000000006e40a0 R08: 0000000020ba4ff0 R09: 0000000000000010 R10: 0000000020000000 R11: 0000000000000282 R12: 0000000000708150 R13: 0000000000000000 R14: 00007faa676209c0 R15: 00007faa67620700 Object at ffff88003b5bbcb8, in cache kmalloc-64 size: 64 Allocated: PID = 20909 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:513 set_track mm/kasan/kasan.c:525 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:616 kmem_cache_alloc_trace+0x82/0x270 mm/slub.c:2745 kmalloc include/linux/slab.h:490 [inline] kzalloc include/linux/slab.h:663 [inline] tcp_sendmsg_fastopen net/ipv4/tcp.c:1094 [inline] tcp_sendmsg+0x221a/0x39b0 net/ipv4/tcp.c:1139 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x660/0x810 net/socket.c:1696 SyS_sendto+0x40/0x50 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed: PID = 20909 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:513 set_track mm/kasan/kasan.c:525 [inline] kasan_slab_free+0x73/0xc0 mm/kasan/kasan.c:589 slab_free_hook mm/slub.c:1357 [inline] slab_free_freelist_hook mm/slub.c:1379 [inline] slab_free mm/slub.c:2961 [inline] kfree+0xe8/0x2b0 mm/slub.c:3882 tcp_free_fastopen_req net/ipv4/tcp.c:1077 [inline] tcp_disconnect+0xc15/0x13e0 net/ipv4/tcp.c:2328 __inet_stream_connect+0x20c/0xf90 net/ipv4/af_inet.c:593 tcp_sendmsg_fastopen net/ipv4/tcp.c:1111 [inline] tcp_sendmsg+0x23a8/0x39b0 net/ipv4/tcp.c:1139 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x660/0x810 net/socket.c:1696 SyS_sendto+0x40/0x50 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x1f/0xbe Fixes: e994b2f0fb92 ("tcp: do not lock listener to process SYN packets") Fixes: 7db92362d2fe ("tcp: fix potential double free issue for fastopen_req") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14net: ipv6: Do not duplicate DAD on link upDavid Ahern1-2/+3
[ Upstream commit 6d717134a1a6e1b34a7d0d70e953037bc2642046 ] Andrey reported a warning triggered by the rcu code: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 5911 at lib/debugobjects.c:289 debug_print_object+0x175/0x210 ODEBUG: activate active (active state 1) object type: rcu_head hint: (null) Modules linked in: CPU: 1 PID: 5911 Comm: a.out Not tainted 4.11.0-rc8+ #271 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x192/0x22d lib/dump_stack.c:52 __warn+0x19f/0x1e0 kernel/panic.c:549 warn_slowpath_fmt+0xe0/0x120 kernel/panic.c:564 debug_print_object+0x175/0x210 lib/debugobjects.c:286 debug_object_activate+0x574/0x7e0 lib/debugobjects.c:442 debug_rcu_head_queue kernel/rcu/rcu.h:75 __call_rcu.constprop.76+0xff/0x9c0 kernel/rcu/tree.c:3229 call_rcu_sched+0x12/0x20 kernel/rcu/tree.c:3288 rt6_rcu_free net/ipv6/ip6_fib.c:158 rt6_release+0x1ea/0x290 net/ipv6/ip6_fib.c:188 fib6_del_route net/ipv6/ip6_fib.c:1461 fib6_del+0xa42/0xdc0 net/ipv6/ip6_fib.c:1500 __ip6_del_rt+0x100/0x160 net/ipv6/route.c:2174 ip6_del_rt+0x140/0x1b0 net/ipv6/route.c:2187 __ipv6_ifa_notify+0x269/0x780 net/ipv6/addrconf.c:5520 addrconf_ifdown+0xe60/0x1a20 net/ipv6/addrconf.c:3672 ... Andrey's reproducer program runs in a very tight loop, calling 'unshare -n' and then spawning 2 sets of 14 threads running random ioctl calls. The relevant networking sequence: 1. New network namespace created via unshare -n - ip6tnl0 device is created in down state 2. address added to ip6tnl0 - equivalent to ip -6 addr add dev ip6tnl0 fd00::bb/1 - DAD is started on the address and when it completes the host route is inserted into the FIB 3. ip6tnl0 is brought up - the new fixup_permanent_addr function restarts DAD on the address 4. exit namespace - teardown / cleanup sequence starts - once in a blue moon, lo teardown appears to happen BEFORE teardown of ip6tunl0 + down on 'lo' removes the host route from the FIB since the dst->dev for the route is loobback + host route added to rcu callback list * rcu callback has not run yet, so rt is NOT on the gc list so it has NOT been marked obsolete 5. in parallel to 4. worker_thread runs addrconf_dad_completed - DAD on the address on ip6tnl0 completes - calls ipv6_ifa_notify which inserts the host route All of that happens very quickly. The result is that a host route that has been deleted from the IPv6 FIB and added to the RCU list is re-inserted into the FIB. The exit namespace eventually gets to cleaning up ip6tnl0 which removes the host route from the FIB again, calls the rcu function for cleanup -- and triggers the double rcu trace. The root cause is duplicate DAD on the address -- steps 2 and 3. Arguably, DAD should not be started in step 2. The interface is in the down state, so it can not really send out requests for the address which makes starting DAD pointless. Since the second DAD was introduced by a recent change, seems appropriate to use it for the Fixes tag and have the fixup function only start DAD for addresses in the PREDAD state which occurs in addrconf_ifdown if the address is retained. Big thanks to Andrey for isolating a reliable reproducer for this problem. Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14tcp: fix wraparound issue in tcp_lpEric Dumazet1-2/+4
[ Upstream commit a9f11f963a546fea9144f6a6d1a307e814a387e7 ] Be careful when comparing tcp_time_stamp to some u32 quantity, otherwise result can be surprising. Fixes: 7c106d7e782b ("[TCP]: TCP Low Priority congestion control") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14tcp: fix access to sk->sk_state in tcp_poll()Davide Caratti1-1/+1
[ Upstream commit d68be71ea14d609a5f31534003319be5db422595 ] avoid direct access to sk->sk_state when tcp_poll() is called on a socket using active TCP fastopen with deferred connect. Use local variable 'state', which stores the result of sk_state_load(), like it was done in commit 00fd38d938db ("tcp: ensure proper barriers in lockless contexts"). Fixes: 19f6d3f3c842 ("net/tcp-fastopen: Add new API support") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds6-13/+53
Pull networking fixes from David Miller: "Just a couple more stragglers, I really hope this is it. 1) Don't let frags slip down into the GRO segmentation handlers, from Steffen Klassert. 2) Truesize under-estimation triggers warnings in TCP over loopback with socket filters, 2 part fix from Eric Dumazet. 3) Fix undesirable reset of bonding MTU to ETH_HLEN on slave removal, from Paolo Abeni. 4) If we flush the XFRM policy after garbage collection, it doesn't work because stray entries can be created afterwards. Fix from Xin Long. 5) Hung socket connection fixes in TIPC from Parthasarathy Bhuvaragan. 6) Fix GRO regression with IPSEC when netfilter is disabled, from Sabrina Dubroca. 7) Fix cpsw driver Kconfig dependency regression, from Arnd Bergmann" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: hso: register netdev later to avoid a race condition net: adjust skb->truesize in ___pskb_trim() tcp: do not underestimate skb->truesize in tcp_trim_head() bonding: avoid defaulting hard_header_len to ETH_HLEN on slave removal ipv4: Don't pass IP fragments to upper layer GRO handlers. cpsw/netcp: refine cpts dependency tipc: close the connection if protocol messages contain errors tipc: improve error validations for sockets in CONNECTING state tipc: Fix missing connection request handling xfrm: fix GRO for !CONFIG_NETFILTER xfrm: do the garbage collection after flushing policy
2017-04-28net: adjust skb->truesize in ___pskb_trim()Eric Dumazet1-0/+2
Andrey found a way to trigger the WARN_ON_ONCE(delta < len) in skb_try_coalesce() using syzkaller and a filter attached to a TCP socket. As we did recently in commit 158f323b9868 ("net: adjust skb->truesize in pskb_expand_head()") we can adjust skb->truesize from ___pskb_trim(), via a call to skb_condense(). If all frags were freed, then skb->truesize can be recomputed. This call can be done if skb is not yet owned, or destructor is sock_edemux(). Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28tcp: do not underestimate skb->truesize in tcp_trim_head()Eric Dumazet1-7/+12
Andrey found a way to trigger the WARN_ON_ONCE(delta < len) in skb_try_coalesce() using syzkaller and a filter attached to a TCP socket over loopback interface. I believe one issue with looped skbs is that tcp_trim_head() can end up producing skb with under estimated truesize. It hardly matters for normal conditions, since packets sent over loopback are never truncated. Bytes trimmed from skb->head should not change skb truesize, since skb->head is not reallocated. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28ipv4: Don't pass IP fragments to upper layer GRO handlers.Steffen Klassert1-0/+3
Upper layer GRO handlers can not handle IP fragments, so exit GRO processing in this case. This fixes ESP GRO because the packet must be reassembled before we can decapsulate, otherwise we get authentication failures. It also aligns IPv4 to IPv6 where packets with fragmentation headers are not passed to upper layer GRO handlers. Fixes: 7785bba299a8 ("esp: Add a software GRO codepath") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28Merge branch 'master' of ↵David S. Miller2-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2017-04-28 1) Do garbage collecting after a policy flush to remove old bundles immediately. From Xin Long. 2) Fix GRO if netfilter is not defined. From Sabrina Dubroca. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28tipc: close the connection if protocol messages contain errorsParthasarathy Bhuvaragan1-0/+8
When a socket is shutting down, we notify the peer node about the connection termination by reusing an incoming message if possible. If the last received message was a connection acknowledgment message, we reverse this message and set the error code to TIPC_ERR_NO_PORT and send it to peer. In tipc_sk_proto_rcv(), we never check for message errors while processing the connection acknowledgment or probe messages. Thus this message performs the usual flow control accounting and leaves the session hanging. In this commit, we terminate the connection when we receive such error messages. Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28tipc: improve error validations for sockets in CONNECTING stateParthasarathy Bhuvaragan1-3/+22
Until now, the checks for sockets in CONNECTING state was based on the assumption that the incoming message was always from the peer's accepted data socket. However an application using a non-blocking socket sends an implicit connect, this socket which is in CONNECTING state can receive error messages from the peer's listening socket. As we discard these messages, the application socket hangs as there due to inactivity. In addition to this, there are other places where we process errors but do not notify the user. In this commit, we process such incoming error messages and notify our users about them using sk_state_change(). Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28tipc: Fix missing connection request handlingParthasarathy Bhuvaragan1-2/+1
In filter_connect, we use waitqueue_active() to check for any connections to wakeup. But waitqueue_active() is missing memory barriers while accessing the critical sections, leading to inconsistent results. In this commit, we replace this with an SMP safe wq_has_sleeper() using the generic socket callback sk_data_ready(). Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27Merge branch 'for-linus' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: - fix orangefs handling of faults on write() - I'd missed that one back when orangefs was going through review. - readdir counterpart of "9p: cope with bogus responses from server in p9_client_{read,write}" - server might be lying or broken, and we'd better not overrun the kmalloc'ed buffer we are copying the results into. - NFS O_DIRECT read/write can leave iov_iter advanced by too much; that's what had been causing iov_iter_pipe() warnings davej had been seeing. - statx_timestamp.tv_nsec type fix (s32 -> u32). That one really should go in before 4.11. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: uapi: change the type of struct statx_timestamp.tv_nsec to unsigned fix nfs O_DIRECT advancing iov_iter too much p9_client_readdir() fix orangefs_bufmap_copy_from_iovec(): fix EFAULT handling
2017-04-27xfrm: fix GRO for !CONFIG_NETFILTERSabrina Dubroca1-1/+1
In xfrm_input() when called from GRO, async == 0, and we end up skipping the processing in xfrm4_transport_finish(). GRO path will always skip the NF_HOOK, so we don't need the special-case for !NETFILTER during GRO processing. Fixes: 7785bba299a8 ("esp: Add a software GRO codepath") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-26ipv6: check raw payload size correctly in ioctlJamie Bainbridge1-2/+1
In situations where an skb is paged, the transport header pointer and tail pointer can be the same because the skb contents are in frags. This results in ioctl(SIOCINQ/FIONREAD) incorrectly returning a length of 0 when the length to receive is actually greater than zero. skb->len is already correctly set in ip6_input_finish() with pskb_pull(), so use skb->len as it always returns the correct result for both linear and paged data. Signed-off-by: Jamie Bainbridge <jbainbri@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26tcp: memset ca_priv data to 0 properlyWei Wang1-8/+3
Always zero out ca_priv data in tcp_assign_congestion_control() so that ca_priv data is cleared out during socket creation. Also always zero out ca_priv data in tcp_reinit_congestion_control() so that when cc algorithm is changed, ca_priv data is cleared out as well. We should still zero out ca_priv data even in TCP_CLOSE state because user could call connect() on AF_UNSPEC to disconnect the socket and leave it in TCP_CLOSE state and later call setsockopt() to switch cc algorithm on this socket. Fixes: 2b0a8c9ee ("tcp: add CDG congestion control") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26ipv6: check skb->protocol before lookup for nexthopWANG Cong1-16/+18
Andrey reported a out-of-bound access in ip6_tnl_xmit(), this is because we use an ipv4 dst in ip6_tnl_xmit() and cast an IPv4 neigh key as an IPv6 address: neigh = dst_neigh_lookup(skb_dst(skb), &ipv6_hdr(skb)->daddr); if (!neigh) goto tx_err_link_failure; addr6 = (struct in6_addr *)&neigh->primary_key; // <=== HERE addr_type = ipv6_addr_type(addr6); if (addr_type == IPV6_ADDR_ANY) addr6 = &ipv6_hdr(skb)->daddr; memcpy(&fl6->daddr, addr6, sizeof(fl6->daddr)); Also the network header of the skb at this point should be still IPv4 for 4in6 tunnels, we shold not just use it as IPv6 header. This patch fixes it by checking if skb->protocol is ETH_P_IPV6: if it is, we are safe to do the nexthop lookup using skb_dst() and ipv6_hdr(skb)->daddr; if not (aka IPv4), we have no clue about which dest address we can pick here, we have to rely on callers to fill it from tunnel config, so just fall to ip6_route_output() to make the decision. Fixes: ea3dc9601bda ("ip6_tunnel: Add support for wildcard tunnel endpoints.") Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26net: core: Prevent from dereferencing null pointer when releasing SKBMyungho Jung1-0/+3
Added NULL check to make __dev_kfree_skb_irq consistent with kfree family of functions. Link: https://bugzilla.kernel.org/show_bug.cgi?id=195289 Signed-off-by: Myungho Jung <mhjungk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26xfrm: do the garbage collection after flushing policyXin Long1-0/+4
Now xfrm garbage collection can be triggered by 'ip xfrm policy del'. These is no reason not to do it after flushing policies, especially considering that 'garbage collection deferred' is only triggered when it reaches gc_thresh. It's no good that the policy is gone but the xdst still hold there. The worse thing is that xdst->route/orig_dst is also hold and can not be released even if the orig_dst is already expired. This patch is to do the garbage collection if there is any policy removed in xfrm_policy_flush. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-25net/packet: check length in getsockopt() called with PACKET_HDRLENAlexander Potapenko1-0/+2
In the case getsockopt() is called with PACKET_HDRLEN and optlen < 4 |val| remains uninitialized and the syscall may behave differently depending on its value, and even copy garbage to userspace on certain architectures. To fix this we now return -EINVAL if optlen is too small. This bug has been detected with KMSAN. Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25net: ipv6: regenerate host route if moved to gc listDavid Ahern1-2/+12
Taking down the loopback device wreaks havoc on IPv6 routing. By extension, taking down a VRF device wreaks havoc on its table. Dmitry and Andrey both reported heap out-of-bounds reports in the IPv6 FIB code while running syzkaller fuzzer. The root cause is a dead dst that is on the garbage list gets reinserted into the IPv6 FIB. While on the gc (or perhaps when it gets added to the gc list) the dst->next is set to an IPv4 dst. A subsequent walk of the ipv6 tables causes the out-of-bounds access. Andrey's reproducer was the key to getting to the bottom of this. With IPv6, host routes for an address have the dst->dev set to the loopback device. When the 'lo' device is taken down, rt6_ifdown initiates a walk of the fib evicting routes with the 'lo' device which means all host routes are removed. That process moves the dst which is attached to an inet6_ifaddr to the gc list and marks it as dead. The recent change to keep global IPv6 addresses added a new function, fixup_permanent_addr, that is called on admin up. That function restarts dad for an inet6_ifaddr and when it completes the host route attached to it is inserted into the fib. Since the route was marked dead and moved to the gc list, re-inserting the route causes the reported out-of-bounds accesses. If the device with the address is taken down or the address is removed, the WARN_ON in fib6_del is triggered. All of those faults are fixed by regenerating the host route if the existing one has been moved to the gc list, something that can be determined by checking if the rt6i_ref counter is 0. Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Reported-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25bridge: move bridge multicast cleanup to ndo_uninitXin Long2-1/+1
During removing a bridge device, if the bridge is still up, a new mdb entry still can be added in br_multicast_add_group() after all mdb entries are removed in br_multicast_dev_del(). Like the path: mld_ifc_timer_expire -> mld_sendpack -> ... br_multicast_rcv -> br_multicast_add_group The new mp's timer will be set up. If the timer expires after the bridge is freed, it may cause use-after-free panic in br_multicast_group_expired. BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 IP: [<ffffffffa07ed2c8>] br_multicast_group_expired+0x28/0xb0 [bridge] Call Trace: <IRQ> [<ffffffff81094536>] call_timer_fn+0x36/0x110 [<ffffffffa07ed2a0>] ? br_mdb_free+0x30/0x30 [bridge] [<ffffffff81096967>] run_timer_softirq+0x237/0x340 [<ffffffff8108dcbf>] __do_softirq+0xef/0x280 [<ffffffff8169889c>] call_softirq+0x1c/0x30 [<ffffffff8102c275>] do_softirq+0x65/0xa0 [<ffffffff8108e055>] irq_exit+0x115/0x120 [<ffffffff81699515>] smp_apic_timer_interrupt+0x45/0x60 [<ffffffff81697a5d>] apic_timer_interrupt+0x6d/0x80 Nikolay also found it would cause a memory leak - the mdb hash is reallocated and not freed due to the mdb rehash. unreferenced object 0xffff8800540ba800 (size 2048): backtrace: [<ffffffff816e2287>] kmemleak_alloc+0x67/0xc0 [<ffffffff81260bea>] __kmalloc+0x1ba/0x3e0 [<ffffffffa05c60ee>] br_mdb_rehash+0x5e/0x340 [bridge] [<ffffffffa05c74af>] br_multicast_new_group+0x43f/0x6e0 [bridge] [<ffffffffa05c7aa3>] br_multicast_add_group+0x203/0x260 [bridge] [<ffffffffa05ca4b5>] br_multicast_rcv+0x945/0x11d0 [bridge] [<ffffffffa05b6b10>] br_dev_xmit+0x180/0x470 [bridge] [<ffffffff815c781b>] dev_hard_start_xmit+0xbb/0x3d0 [<ffffffff815c8743>] __dev_queue_xmit+0xb13/0xc10 [<ffffffff815c8850>] dev_queue_xmit+0x10/0x20 [<ffffffffa02f8d7a>] ip6_finish_output2+0x5ca/0xac0 [ipv6] [<ffffffffa02fbfc6>] ip6_finish_output+0x126/0x2c0 [ipv6] [<ffffffffa02fc245>] ip6_output+0xe5/0x390 [ipv6] [<ffffffffa032b92c>] NF_HOOK.constprop.44+0x6c/0x240 [ipv6] [<ffffffffa032bd16>] mld_sendpack+0x216/0x3e0 [ipv6] [<ffffffffa032d5eb>] mld_ifc_timer_expire+0x18b/0x2b0 [ipv6] This could happen when ip link remove a bridge or destroy a netns with a bridge device inside. With Nikolay's suggestion, this patch is to clean up bridge multicast in ndo_uninit after bridge dev is shutdown, instead of br_dev_delete, so that netif_running check in br_multicast_add_group can avoid this issue. v1->v2: - fix this issue by moving br_multicast_dev_del to ndo_uninit, instead of calling dev_close in br_dev_delete. (NOTE: Depends upon b6fe0440c637 ("bridge: implement missing ndo_uninit()")) Fixes: e10177abf842 ("bridge: multicast: fix handling of temp and perm entries") Reported-by: Jianwen Ji <jiji@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25ipv6: fix source routingSabrina Dubroca1-0/+4
Commit a149e7c7ce81 ("ipv6: sr: add support for SRH injection through setsockopt") introduced handling of IPV6_SRCRT_TYPE_4, but at the same time restricted it to only IPV6_SRCRT_TYPE_0 and IPV6_SRCRT_TYPE_4. Previously, ipv6_push_exthdr() and fl6_update_dst() would also handle other values (ie STRICT and TYPE_2). Restore previous source routing behavior, by handling IPV6_SRCRT_STRICT and IPV6_SRCRT_TYPE_2 the same way as IPV6_SRCRT_TYPE_0 in ipv6_push_exthdr() and fl6_update_dst(). Fixes: a149e7c7ce81 ("ipv6: sr: add support for SRH injection through setsockopt") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25tipc: fix socket flow control accounting error at tipc_recv_streamParthasarathy Bhuvaragan1-1/+1
Until now in tipc_recv_stream(), we update the received unacknowledged bytes based on a stack variable and not based on the actual message size. If the user buffer passed at tipc_recv_stream() is smaller than the received skb, the size variable in stack differs from the actual message size in the skb. This leads to a flow control accounting error causing permanent congestion. In this commit, we fix this accounting error by always using the size of the incoming message. Fixes: 10724cc7bb78 ("tipc: redesign connection-level flow control") Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25tipc: fix socket flow control accounting error at tipc_send_streamParthasarathy Bhuvaragan1-1/+1
Until now in tipc_send_stream(), we return -1 when the socket encounters link congestion even if the socket had successfully sent partial data. This is incorrect as the application resends the same the partial data leading to data corruption at receiver's end. In this commit, we return the partially sent bytes as the return value at link congestion. Fixes: 10724cc7bb78 ("tipc: redesign connection-level flow control") Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25ipv6: move stub initialization after ipv6 setup completionPaolo Abeni1-2/+4
The ipv6 stub pointer is currently initialized before the ipv6 routing subsystem: a 3rd party can access and use such stub before the routing data is ready. Moreover, such pointer is not cleared in case of initialization error, possibly leading to dangling pointers usage. This change addresses the above moving the stub initialization at the end of ipv6 init code. Fixes: 5f81bd2e5d80 ("ipv6: export a stub for IPv6 symbols used by vxlan") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24net: ipv6: send unsolicited NA if enabled for all interfacesDavid Ahern1-1/+2
When arp_notify is set to 1 for either a specific interface or for 'all' interfaces, gratuitous arp requests are sent. Since ndisc_notify is the ipv6 equivalent to arp_notify, it should follow the same semantics. Commit 4a6e3c5def13 ("net: ipv6: send unsolicited NA on admin up") sends the NA on admin up. The final piece is checking devconf_all->ndisc_notify in addition to the per device setting. Add it. Fixes: 5cb04436eef6 ("ipv6: add knob to send unsolicited ND on link-layer address change") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24udp: disable inner UDP checksum offloads in IPsec caseAnsis Atteka1-0/+3
Otherwise, UDP checksum offloads could corrupt ESP packets by attempting to calculate UDP checksum when this inner UDP packet is already protected by IPsec. One way to reproduce this bug is to have a VM with virtio_net driver (UFO set to ON in the guest VM); and then encapsulate all guest's Ethernet frames in Geneve; and then further encrypt Geneve with IPsec. In this case following symptoms are observed: 1. If using ixgbe NIC, then it will complain with following error message: ixgbe 0000:01:00.1: partial checksum but l4 proto=32! 2. Receiving IPsec stack will drop all the corrupted ESP packets and increase XfrmInStateProtoError counter in /proc/net/xfrm_stat. 3. iperf UDP test from the VM with packet sizes above MTU will not work at all. 4. iperf TCP test from the VM will get ridiculously low performance because. Signed-off-by: Ansis Atteka <aatteka@ovn.org> Co-authored-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24ipv4: Avoid caching l3mdev dst on mismatched local routeRobert Shearman1-1/+2
David reported that doing the following: ip li add red type vrf table 10 ip link set dev eth1 vrf red ip addr add 127.0.0.1/8 dev red ip link set dev eth1 up ip li set red up ping -c1 -w1 -I red 127.0.0.1 ip li del red when either policy routing IP rules are present or the local table lookup ip rule is before the l3mdev lookup results in a hang with these messages: unregister_netdevice: waiting for red to become free. Usage count = 1 The problem is caused by caching the dst used for sending the packet out of the specified interface on a local route with a different nexthop interface. Thus the dst could stay around until the route in the table the lookup was done is deleted which may be never. Address the problem by not forcing output device to be the l3mdev in the flow's output interface if the lookup didn't use the l3mdev. This then results in the dst using the right device according to the route. Changes in v2: - make the dev_out passed in by __ip_route_output_key_hash correct instead of checking the nh dev if FLOWI_FLAG_SKIP_NH_OIF is set as suggested by David. Fixes: 5f02ce24c2696 ("net: l3mdev: Allow the l3mdev to be a loopback") Reported-by: David Ahern <dsa@cumulusnetworks.com> Suggested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Robert Shearman <rshearma@brocade.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21netpoll: Check for skb->queue_mappingTushar Dave1-2/+8
Reducing real_num_tx_queues needs to be in sync with skb queue_mapping otherwise skbs with queue_mapping greater than real_num_tx_queues can be sent to the underlying driver and can result in kernel panic. One such event is running netconsole and enabling VF on the same device. Or running netconsole and changing number of tx queues via ethtool on same device. e.g. Unable to handle kernel NULL pointer dereference tsk->{mm,active_mm}->context = 0000000000001525 tsk->{mm,active_mm}->pgd = fff800130ff9a000 \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ kworker/48:1(475): Oops [#1] CPU: 48 PID: 475 Comm: kworker/48:1 Tainted: G OE 4.11.0-rc3-davem-net+ #7 Workqueue: events queue_process task: fff80013113299c0 task.stack: fff800131132c000 TSTATE: 0000004480e01600 TPC: 00000000103f9e3c TNPC: 00000000103f9e40 Y: 00000000 Tainted: G OE TPC: <ixgbe_xmit_frame_ring+0x7c/0x6c0 [ixgbe]> g0: 0000000000000000 g1: 0000000000003fff g2: 0000000000000000 g3: 0000000000000001 g4: fff80013113299c0 g5: fff8001fa6808000 g6: fff800131132c000 g7: 00000000000000c0 o0: fff8001fa760c460 o1: fff8001311329a50 o2: fff8001fa7607504 o3: 0000000000000003 o4: fff8001f96e63a40 o5: fff8001311d77ec0 sp: fff800131132f0e1 ret_pc: 000000000049ed94 RPC: <set_next_entity+0x34/0xb80> l0: 0000000000000000 l1: 0000000000000800 l2: 0000000000000000 l3: 0000000000000000 l4: 000b2aa30e34b10d l5: 0000000000000000 l6: 0000000000000000 l7: fff8001fa7605028 i0: fff80013111a8a00 i1: fff80013155a0780 i2: 0000000000000000 i3: 0000000000000000 i4: 0000000000000000 i5: 0000000000100000 i6: fff800131132f1a1 i7: 00000000103fa4b0 I7: <ixgbe_xmit_frame+0x30/0xa0 [ixgbe]> Call Trace: [00000000103fa4b0] ixgbe_xmit_frame+0x30/0xa0 [ixgbe] [0000000000998c74] netpoll_start_xmit+0xf4/0x200 [0000000000998e10] queue_process+0x90/0x160 [0000000000485fa8] process_one_work+0x188/0x480 [0000000000486410] worker_thread+0x170/0x4c0 [000000000048c6b8] kthread+0xd8/0x120 [0000000000406064] ret_from_fork+0x1c/0x2c [0000000000000000] (null) Disabling lock debugging due to kernel taint Caller[00000000103fa4b0]: ixgbe_xmit_frame+0x30/0xa0 [ixgbe] Caller[0000000000998c74]: netpoll_start_xmit+0xf4/0x200 Caller[0000000000998e10]: queue_process+0x90/0x160 Caller[0000000000485fa8]: process_one_work+0x188/0x480 Caller[0000000000486410]: worker_thread+0x170/0x4c0 Caller[000000000048c6b8]: kthread+0xd8/0x120 Caller[0000000000406064]: ret_from_fork+0x1c/0x2c Caller[0000000000000000]: (null) Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21ip6mr: fix notification device destructionNikolay Aleksandrov1-7/+6
Andrey Konovalov reported a BUG caused by the ip6mr code which is caused because we call unregister_netdevice_many for a device that is already being destroyed. In IPv4's ipmr that has been resolved by two commits long time ago by introducing the "notify" parameter to the delete function and avoiding the unregister when called from a notifier, so let's do the same for ip6mr. The trace from Andrey: ------------[ cut here ]------------ kernel BUG at net/core/dev.c:6813! invalid opcode: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 1165 Comm: kworker/u4:3 Not tainted 4.11.0-rc7+ #251 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: netns cleanup_net task: ffff880069208000 task.stack: ffff8800692d8000 RIP: 0010:rollback_registered_many+0x348/0xeb0 net/core/dev.c:6813 RSP: 0018:ffff8800692de7f0 EFLAGS: 00010297 RAX: ffff880069208000 RBX: 0000000000000002 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88006af90569 RBP: ffff8800692de9f0 R08: ffff8800692dec60 R09: 0000000000000000 R10: 0000000000000006 R11: 0000000000000000 R12: ffff88006af90070 R13: ffff8800692debf0 R14: dffffc0000000000 R15: ffff88006af90000 FS: 0000000000000000(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe7e897d870 CR3: 00000000657e7000 CR4: 00000000000006e0 Call Trace: unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many+0xc8/0x120 net/core/dev.c:7880 ip6mr_device_event+0x362/0x3f0 net/ipv6/ip6mr.c:1346 notifier_call_chain+0x145/0x2f0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1647 call_netdevice_notifiers net/core/dev.c:1663 rollback_registered_many+0x919/0xeb0 net/core/dev.c:6841 unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many net/core/dev.c:7880 default_device_exit_batch+0x4fa/0x640 net/core/dev.c:8333 ops_exit_list.isra.4+0x100/0x150 net/core/net_namespace.c:144 cleanup_net+0x5a8/0xb40 net/core/net_namespace.c:463 process_one_work+0xc04/0x1c10 kernel/workqueue.c:2097 worker_thread+0x223/0x19c0 kernel/workqueue.c:2231 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430 Code: 3c 32 00 0f 85 70 0b 00 00 48 b8 00 02 00 00 00 00 ad de 49 89 47 78 e9 93 fe ff ff 49 8d 57 70 49 8d 5f 78 eb 9e e8 88 7a 14 fe <0f> 0b 48 8b 9d 28 fe ff ff e8 7a 7a 14 fe 48 b8 00 00 00 00 00 RIP: rollback_registered_many+0x348/0xeb0 RSP: ffff8800692de7f0 ---[ end trace e0b29c57e9b3292c ]--- Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21net: qrtr: potential use after free in qrtr_sendmsg()Dan Carpenter1-1/+3
If skb_pad() fails then it frees the skb so we should check for errors. Fixes: bdabad3e363d ("net: Add Qualcomm IPC router") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21net: ipv6: RTF_PCPU should not be settable from userspaceDavid Ahern1-0/+4
Andrey reported a fault in the IPv6 route code: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ #250 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff880069809600 task.stack: ffff880062dc8000 RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975 RSP: 0018:ffff880062dced30 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006 RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018 RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0 Call Trace: ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128 ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212 ... Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit set. Flags passed to the kernel are blindly copied to the allocated rt6_info by ip6_route_info_create making a newly inserted route appear as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set and expects rt->dst.from to be set - which it is not since it is not really a per-cpu copy. The subsequent call to __ip6_dst_alloc then generates the fault. Fix by checking for the flag and failing with EINVAL. Fixes: d52d3997f843f ("ipv6: Create percpu rt6_info") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21gso: Validate assumption of frag_list segementationIlan Tayari1-4/+14
Commit 07b26c9454a2 ("gso: Support partial splitting at the frag_list pointer") assumes that all SKBs in a frag_list (except maybe the last one) contain the same amount of GSO payload. This assumption is not always correct, resulting in the following warning message in the log: skb_segment: too many frags For example, mlx5 driver in Striding RQ mode creates some RX SKBs with one frag, and some with 2 frags. After GRO, the frag_list SKBs end up having different amounts of payload. If this frag_list SKB is then forwarded, the aforementioned assumption is violated. Validate the assumption, and fall back to software GSO if it not true. Change-Id: Ia03983f4a47b6534dd987d7a2aad96d54d46d212 Fixes: 07b26c9454a2 ("gso: Support partial splitting at the frag_list pointer") Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21ipv6: sr: fix double free of skb after handling invalid SRHDavid Lebrun1-1/+0
The icmpv6_param_prob() function already does a kfree_skb(), this patch removes the duplicate one. Fixes: 1ababeba4a21f3dba3da3523c670b207fb2feb62 ("ipv6: implement dataplane support for rthdr type 4 (Segment Routing Header)") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20net sched actions: allocate act cookie earlyWolfgang Bumiller1-23/+32
Policing filters do not use the TCA_ACT_* enum and the tb[] nlattr array in tcf_action_init_1() doesn't get filled for them so we should not try to look for a TCA_ACT_COOKIE attribute in the then uninitialized array. The error handling in cookie allocation then calls tcf_hash_release() leading to invalid memory access later on. Additionally, if cookie allocation fails after an already existing non-policing filter has successfully been changed, tcf_action_release() should not be called, also we would have to roll back the changes in the error handling, so instead we now allocate the cookie early and assign it on success at the end. CVE-2017-7979 Fixes: 1045ba77a596 ("net sched actions: Add support for user cookies") Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20Merge branch 'master' of ↵David S. Miller1-29/+64
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2017-04-19 Two fixes for af_key: 1) Add a lock to key dump to prevent a NULL pointer dereference. From Yuejie Shi. 2) Fix slab-out-of-bounds in parse_ipsecrequests. From Herbert Xu. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20ipv6: sr: fix out-of-bounds access in SRH validationDavid Lebrun1-0/+3
This patch fixes an out-of-bounds access in seg6_validate_srh() when the trailing data is less than sizeof(struct sr6_tlv). Reported-by: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20mac80211: reject ToDS broadcast data framesJohannes Berg1-0/+21
AP/AP_VLAN modes don't accept any real 802.11 multicast data frames, but since they do need to accept broadcast management frames the same is currently permitted for data frames. This opens a security problem because such frames would be decrypted with the GTK, and could even contain unicast L3 frames. Since the spec says that ToDS frames must always have the BSSID as the RA (addr1), reject any other data frames. The problem was originally reported in "Predicting, Decrypting, and Abusing WPA2/802.11 Group Keys" at usenix https://www.usenix.org/conference/usenixsecurity16/technical-sessions/presentation/vanhoef and brought to my attention by Jouni. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com> -- Dave, I didn't want to send you a new pull request for a single commit yet again - can you apply this one patch as is? Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20Merge tag 'mac80211-for-davem-2017-04-18' of ↵David S. Miller1-18/+47
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A single fix, for the MU-MIMO monitor mode, that fixes bad SKB accesses if the SKB was paged, which is the case for the only driver supporting this - iwlwifi. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18af_key: Fix sadb_x_ipsecrequest parsingHerbert Xu1-21/+26
The parsing of sadb_x_ipsecrequest is broken in a number of ways. First of all we're not verifying sadb_x_ipsecrequest_len. This is needed when the structure carries addresses at the end. Worse we don't even look at the length when we parse those optional addresses. The migration code had similar parsing code that's better but it also has some deficiencies. The length is overcounted first of all as it includes the header itself. It also fails to check the length before dereferencing the sa_family field. This patch fixes those problems in parse_sockaddr_pair and then uses it in parse_ipsecrequest. Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-17ipv6: drop non loopback packets claiming to originate from ::1Florian Westphal1-2/+5
We lack a saddr check for ::1. This causes security issues e.g. with acls permitting connections from ::1 because of assumption that these originate from local machine. Assuming a source address of ::1 is local seems reasonable. RFC4291 doesn't allow such a source address either, so drop such packets. Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17p9_client_readdir() fixAl Viro1-0/+4
Don't assume that server is sane and won't return more data than asked for. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-10 17:05:30 +0300