summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2010-10-20net: avoid RCU for NOCACHE dstEric Dumazet2-6/+32
There is no point using RCU for dst we allocate for a very short time (used once). Change dst_release() to take DST_NOCACHE into account, but also change skb_dst_set_noref() to force a refcount increment for such dst. This is a _huge_ gain, because we dont waste memory to store xx thousand of dsts. Instead of queueing them to RCU, we can free them instantly. CPU caches can stay hot, re-using same memory blocks to hold temporary dsts. Note : remove unneeded smp_mb__before_atomic_dec(); in dst_release(), since atomic_dec_return() implies a full memory barrier. Stress test, 160.000.000 udp frames sent, IP route cache disabled (DDOS). Before: real 0m38.091s user 0m13.189s sys 7m53.018s After: real 0m29.946s user 0m12.157s sys 7m40.605s For reference, if IP route cache was enabled : real 0m32.030s user 0m10.521s sys 8m15.243s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20net: allocate tx queues in register_netdeviceTom Herbert1-53/+53
This patch introduces netif_alloc_netdev_queues which is called from register_device instead of alloc_netdev_mq. This makes TX queue allocation symmetric with RX allocation. Also, queue locks allocation is done in netdev_init_one_queue. Change set_real_num_tx_queues to fail if requested number < 1 or greater than number of allocated queues. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20net: cleanups in RX queue allocationTom Herbert1-19/+17
Clean up in RX queue allocation. In netif_set_real_num_rx_queues return error on attempt to set zero queues, or requested number is greater than number of allocated queues. In netif_alloc_rx_queues, do BUG_ON if queue_count is zero. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20net: fail alloc_netdev_mq if queue count < 1Tom Herbert1-0/+6
In alloc_netdev_mq fail if requested queue_count < 1. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20Merge branch 'for-davem' of ↵David S. Miller26-241/+388
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-10-20phonet: remove the unused variable pnChangli Gao1-1/+0
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20netpoll: Revert napi_poll fix for bonding driverNeil Horman1-8/+1
In an erlier patch I modified napi_poll so that devices with IFF_MASTER polled the per_cpu list instead of the device list for napi. I did this because the bonding driver has no napi instances to poll, it instead expects to check the slave devices napi instances, which napi_poll was unaware of. Looking at this more closely however, I now see this isn't strictly needed. As the bond driver poll_controller calls the slaves poll_controller via netpoll_poll_dev, which recursively calls poll_napi on each slave, allowing those napi instances to get serviced. The earlier patch isn't at all harmfull, its just not needed, so lets revert it to make the code cleaner. Sorry for the noise, Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reviewed-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-19inet: RCU changes in inetdev_by_index()Eric Dumazet4-22/+16
Convert inetdev_by_index() to not increment in_dev refcount. Callers hold RCU or RTNL, and should not decrement in_dev refcount. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-19net: avoid a dev refcount in ip_mc_find_dev()Eric Dumazet2-3/+3
We hold RTNL in ip_mc_find_dev(), no need to touch device refcount. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bonding: Fix napi poll for bonding driverNeil Horman1-1/+8
Usually the netpoll path, when preforming a napi poll can get away with just polling all the napi instances of the configured device. Thats not the case for the bonding driver however, as the napi instances which may wind up getting flagged as needing polling after the poll_controller call don't belong to the bonded device, but rather to the slave devices. Fix this by checking the device in question for the IFF_MASTER flag, if set, we know we need to check the full poll list for this cpu, rather than just the devices napi instance list. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bonding: Fix bonding drivers improper modification of netpoll structureNeil Horman1-3/+3
The bonding driver currently modifies the netpoll structure in its xmit path while sending frames from netpoll. This is racy, as other cpus can access the netpoll structure in parallel. Since the bonding driver points np->dev to a slave device, other cpus can inadvertently attempt to send data directly to slave devices, leading to improper locking with the bonding master, lost frames, and deadlocks. This patch fixes that up. This patch also removes the real_dev pointer from the netpoll structure as that data is really only used by bonding in the poll_controller, and we can emulate its behavior by check each slave for IS_UP. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18IPv4: route.c: Change checks against 0xffffffff to ipv4_is_lbcast()Andy Walls1-7/+6
Change a few checks against the hardcoded broadcast address, 0xffffffff, to ipv4_is_lbcast(). Remove some existing checks using ipv4_is_lbcast() that are now obviously superfluous. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18tipc: Simplify bearer shutdown logicAllan Stephens1-27/+11
Optimize processing in TIPC's bearer shutdown code, including: 1. Remove an unnecessary check to see if TIPC bearer's can exist. 2. Don't release spinlocks before calling a media-specific disabling routine, since the routine can't sleep. 3. Make bearer_disable() operate directly on a struct bearer, instead of needlessly taking a name and then mapping that to the struct. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18tipc: Kill tipc_get_mode() completely.David S. Miller1-6/+0
It's completely unused and exporting a static symbol makes no sense and breaks the build. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18fib_hash: RCU conversion phase 2Eric Dumazet2-77/+101
Get rid of fib_hash_lock rwlock. The fn_zone hash table resize is the noticeable part of this patch. I added a seqlock per fn_zone, so that readers can restart their lookup in the (very rare) case a writer expanded the hash table. Add rcu heads in fib_alias and fib_node, use call_rcu() to defer their freeing, and use appropriate _rcu list manipulations. Stress test (160.000.000 udp frames sent, IP route cache disabled to mimic DDOS attack, FIB_HASH) Before: real 0m41.191s user 0m13.137s sys 8m55.241s After: real 0m38.091s user 0m13.189s sys 7m53.018s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18fib_hash: RCU conversion phase 1Eric Dumazet1-19/+38
First step for RCU conversion of fib_hash : struct fn_zone are created and never deleted. Very classic conversion, using rcu_assign_pointer(), rcu_dereference() and rtnl_dereference() verbs. __rcu markers on fz_next and fn_zone_list They are created under RTNL, we dont need fib_hash_lock anymore in fn_new_zone(). Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18fib_hash: embed initial hash table in fn_zoneEric Dumazet1-29/+23
While looking for false sharing problems, I noticed sizeof(struct fn_zone) was small (28 bytes) and possibly sharing a cache line with an often written kernel structure. Most of the time, fn_zone uses its initial hash table of 16 slots. We can avoid the false sharing problem by embedding this initial hash table in fn_zone itself, so that sizeof(fn_zone) > L1_CACHE_BYTES We did a similar optimization in commit a6501e080c (Reduce memory needs and speedup lookups) Add a fz_revorder field to speedup fn_hash() a bit. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18tcp: use correct counters in CA_CWR state tooIlpo Järvinen1-6/+7
As CWR is stronger than CA_Disorder state, we can miscount SACK/Reno failure into other timeouts. Not a bad problem as it can happen only due to ECN, FRTO detecting spurious RTO or xmit error which are the only callers of tcp_enter_cwr. And even then losses and RTO must still follow thereafter to actually end up into the relevant code paths. Compile tested. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18tcp: sack lost marking fixesIlpo Järvinen1-10/+14
When only fast rexmit should be done, tcp_mark_head_lost marks L too far. Also, sacked_upto below 1 is perfectly valid number, the packets == 0 then needs to be trapped elsewhere. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16tipc: cleanup function namespacestephen hemminger26-389/+84
Do some cleanups of TIPC based on make namespacecheck 1. Don't export unused symbols 2. Eliminate dead code 3. Make functions and variables local 4. Rename buf_acquire to tipc_buf_acquire since it is used in several files Compile tested only. This make break out of tree kernel modules that depend on TIPC routines. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16fib: avoid false sharing on fib_table_hashEric Dumazet2-9/+11
While doing profile analysis, I found fib_hash_table was sometime in a cache line shared by a possibly often written kernel structure. (CONFIG_IP_ROUTE_MULTIPATH || !CONFIG_IPV6_MULTIPLE_TABLES) It's hard to detect because not easily reproductible. Make sure we allocate a full cache line to keep this shared in all cpus caches. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16fib_trie: use fls() instead of open coded loopEric Dumazet1-12/+4
fib_table_lookup() might use fls() to speedup an open coded loop. Noticed while doing a profile analysis. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16fib: remove a useless synchronize_rcu() callEric Dumazet1-1/+0
fib_nl_delrule() calls synchronize_rcu() for no apparent reason, while rtnl is held. I suspect it was done to avoid an atomic_inc_not_zero() in fib_rules_lookup(), which commit 7fa7cb7109d07 added anyway. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16fib6: use FIB_LOOKUP_NOREF in fib6_rule_lookup()Eric Dumazet1-2/+1
Avoid two atomic ops on found rule in fib6_rule_lookup() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16net: allocate skbs on local nodeEric Dumazet1-12/+1
commit b30973f877 (node-aware skb allocation) spread a wrong habit of allocating net drivers skbs on a given memory node : The one closest to the NIC hardware. This is wrong because as soon as we try to scale network stack, we need to use many cpus to handle traffic and hit slub/slab management on cross-node allocations/frees when these cpus have to alloc/free skbs bound to a central node. skb allocated in RX path are ephemeral, they have a very short lifetime : Extra cost to maintain NUMA affinity is too expensive. What appeared as a nice idea four years ago is in fact a bad one. In 2010, NIC hardwares are multiqueue, or we use RPS to spread the load, and two 10Gb NIC might deliver more than 28 million packets per second, needing all the available cpus. Cost of cross-node handling in network and vm stacks outperforms the small benefit hardware had when doing its DMA transfert in its 'local' memory node at RX time. Even trying to differentiate the two allocations done for one skb (the sk_buff on local node, the data part on NIC hardware node) is not enough to bring good performance. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16Merge branch 'master' of ↵John W. Linville16-82/+195
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2010-10-16Merge branch 'master' of ↵John W. Linville10-159/+193
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6 into for-davem
2010-10-15radiotap: fix vendor namespace parsingJohannes Berg1-26/+32
There's a bug with radiotap vendor namespace parsing if you don't register for the given namespace extensions. Fix this by passing only the unknown vendor namespaces and the registered data to frontends, but not both. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-14Phonet: 'connect' socket implementation for Pipe controllerKumar Sanghvi2-187/+212
Based on suggestion by Rémi Denis-Courmont to implement 'connect' for Pipe controller logic, this patch implements 'connect' socket call for the Pipe controller logic. The patch does following:- - Removes setsockopts for PNPIPE_CREATE and PNPIPE_DESTROY - Adds setsockopt for setting the Pipe handle value - Implements connect socket call - Updates the Pipe controller logic User-space should now follow below sequence with Pipe controller:- -socket -bind -setsockopt for PNPIPE_PIPE_HANDLE -connect -setsockopt for PNPIPE_ENCAP_IP -setsockopt for PNPIPE_ENABLE GPRS/3G data has been tested working fine with this. Signed-off-by: Kumar Sanghvi <kumar.sanghvi@stericsson.com> Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14tipc: clean out all instances of #if 0'd unused codePaul Gortmaker9-375/+1
Remove all instances of legacy, or as yet to be implemented code that is currently living within an #if 0 ... #endif block. In the rare instance that some of it be needed in the future, it can still be dragged out of history, but there is no need for it to sit in mainline. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-13mac80211: fix SMPS requestJohannes Berg1-0/+2
It looks like I submitted a different patch than I tested, because clearly the code in mac80211 is missing actually propagating the requested SMPS mode. Fix that! Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-13mac80211: add probe request filter flagJohannes Berg4-2/+32
Using the frame registration notification, we can see when probe requests are requested and notify the low-level driver via filtering. The flag is also set in AP and IBSS modes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-13cfg80211: notify drivers about frame registrationsJohannes Berg1-3/+20
Drivers may need to adjust their filters according to frame registrations, so notify them about them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-13wireless: Print wiphy name in sysfs.Ben Greear1-0/+9
The index cannot be used to reliably reconstruct a phy name, so explicitly add the phy name to sysfs so that scripts can figure out the parent phy device for a particular wireless interface. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-12net: percpu net_device refcountEric Dumazet1-7/+33
We tried very hard to remove all possible dev_hold()/dev_put() pairs in network stack, using RCU conversions. There is still an unavoidable device refcount change for every dst we create/destroy, and this can slow down some workloads (routers or some app servers, mmap af_packet) We can switch to a percpu refcount implementation, now dynamic per_cpu infrastructure is mature. On a 64 cpus machine, this consumes 256 bytes per device. On x86, dev_hold(dev) code : before lock incl 0x280(%ebx) after: movl 0x260(%ebx),%eax incl fs:(%eax) Stress bench : (Sending 160.000.000 UDP frames, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_TRIE) Before: real 1m1.662s user 0m14.373s sys 12m55.960s After: real 0m51.179s user 0m15.329s sys 10m15.942s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-12Merge branch 'dccp' of git://eden-feed.erg.abdn.ac.uk/net-next-2.6David S. Miller9-63/+66
2010-10-12Bluetooth: clean up rfcomm codeAndrei Emeltchenko1-15/+14
Remove dead code and unused rfcomm thread events Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Update conf_state before send config_req outHaijun Liu1-0/+1
Update conf_state with L2CAP_CONF_REQ_SENT before send config_req out in l2cap_config_req(). Signed-off-by: Haijun Liu <haijun.liu@atheros.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Use the proper error value from bt_skb_send_alloc()Gustavo F. Padovan1-4/+4
&err points to the proper error set by bt_skb_send_alloc() when it fails. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: make batostr() print in the right orderGustavo F. Padovan5-28/+10
The Bluetooth core uses the the BD_ADDR in the opposite order from the human readable order. So we are changing batostr() to print in the correct order and then removing some baswap(), as they are not needed anymore. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: remove unused variable from cmtpGustavo F. Padovan1-2/+1
A value was attributed to 'src', but no one was using. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: check for l2cap header in start fragmentAndrei Emeltchenko1-1/+2
BLUETOOTH SPECIFICATION Version 4.0 [Vol 3] page 36 mentioned "Note: Start Fragments always begin with the Basic L2CAP header of a PDU." Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: check L2CAP length in first ACL fragmentAndrei Emeltchenko1-0/+16
Current Bluetooth code assembles fragments of big L2CAP packets in l2cap_recv_acldata and then checks allowed L2CAP size in assemled L2CAP packet (pi->imtu < skb->len). The patch moves allowed L2CAP size check to the early stage when we receive the first fragment of L2CAP packet. We do not need to reserve and keep L2CAP fragments for bad packets. Updated version after comments from Mat Martineau <mathewm@codeaurora.org> and Gustavo Padovan <padovan@profusion.mobi>. Trace below is received when using stress tools sending big fragmented L2CAP packets. ... [ 1712.798492] swapper: page allocation failure. order:4, mode:0x4020 [ 1712.804809] [<c0031870>] (unwind_backtrace+0x0/0xdc) from [<c00a1f70>] (__alloc_pages_nodemask+0x4) [ 1712.814666] [<c00a1f70>] (__alloc_pages_nodemask+0x47c/0x4d4) from [<c00a1fd8>] (__get_free_pages+) [ 1712.824645] [<c00a1fd8>] (__get_free_pages+0x10/0x3c) from [<c026eb5c>] (__alloc_skb+0x4c/0xfc) [ 1712.833465] [<c026eb5c>] (__alloc_skb+0x4c/0xfc) from [<bf28c738>] (l2cap_recv_acldata+0xf0/0x1f8 ) [ 1712.843322] [<bf28c738>] (l2cap_recv_acldata+0xf0/0x1f8 [l2cap]) from [<bf0094ac>] (hci_rx_task+0x) ... Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Don't clear the blacklist when closing the HCI deviceJohan Hedberg1-1/+0
Clearing the blacklist in hci_dev_do_close() would mean that user space needs to do extra work to re-block devices after a DEVDOWN-DEVUP cycle. This patch removes the clearing of the blacklist in this case and thereby saves user space from the extra work. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Acked-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: remove extra newline from debug outputAndrei Emeltchenko1-1/+1
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Acked-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Use a stream-oriented recvmsg with SOCK_STREAM L2CAP sockets.Mat Martineau1-0/+3
L2CAP ERTM sockets can be opened with the SOCK_STREAM socket type, which is a mandatory request for ERTM mode. However, these sockets still have SOCK_SEQPACKET read semantics when bt_sock_recvmsg() is used to pull data from the receive queue. If the application is only reading part of a frame, then the unread portion of the frame is discarded. If the application requests more bytes than are in the current frame, only the current frame's data is returned. This patch utilizes common code derived from RFCOMM's recvmsg() function to make L2CAP SOCK_STREAM reads behave like RFCOMM reads (and other SOCK_STREAM sockets in general). The application may read one byte at a time from the input stream and not lose any data, and may also read across L2CAP frame boundaries. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Use common SOCK_STREAM receive code in RFCOMMMat Martineau1-98/+6
To reduce code duplication, have rfcomm_sock_recvmsg() call bt_sock_stream_recvmsg(). The common bt_sock_stream_recvmsg() code is nearly identical, with the RFCOMM-specific functionality for deferred setup and connection unthrottling left in rfcomm_sock_recvmsg(). Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Add common code for stream-oriented recvmsg()Mat Martineau1-0/+109
This commit adds a bt_sock_stream_recvmsg() function for use by any Bluetooth code that uses SOCK_STREAM sockets. This code is copied from rfcomm_sock_recvmsg() with minimal modifications to remove RFCOMM-specific functionality and improve readability. L2CAP (with the SOCK_STREAM socket type) and RFCOMM have common needs when it comes to reading data. Proper stream read semantics require that applications can read from a stream one byte at a time and not lose any data. The RFCOMM code already operated on and pulled data from the underlying L2CAP socket, so very few changes were required to make the code more generic for use with non-RFCOMM data over L2CAP. Applications that need more awareness of L2CAP frame boundaries are still free to use SOCK_SEQPACKET sockets, and may verify that they connection did not fall back to basic mode by calling getsockopt(). Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Validate PSM values in calls to connect() and bind()Mat Martineau1-4/+21
Valid L2CAP PSMs are odd numbers, and the least significant bit of the most significant byte must be 0. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Fix RFCOMM RPN negotiationYuri Kululin1-4/+4
According to the ETSI 3GPP TS 07.10 the default bit rate value for RFCOMM is 9600 bit/s. Return this bit rate in case of RPN request and accept other sane bit rates proposed by the sender in RPM command. Signed-off-by: Yuri Kululin <ext-yuri.kululin@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-14 20:48:39 +0300