| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This change allows adding additional files to the xfrm_interface module.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Link: https://lore.kernel.org/r/20221203084659.1837829-2-eyal.birger@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Allow specifying the xfrm interface if_id and link as part of a route
metadata using the lwtunnel infrastructure.
This allows for example using a single xfrm interface in collect_md
mode as the target of multiple routes each specifying a different if_id.
With the appropriate changes to iproute2, considering an xfrm device
ipsec1 in collect_md mode one can for example add a route specifying
an if_id like so:
ip route add <SUBNET> dev ipsec1 encap xfrm if_id 1
In which case traffic routed to the device via this route would use
if_id in the xfrm interface policy lookup.
Or in the context of vrf, one can also specify the "link" property:
ip route add <SUBNET> dev ipsec1 encap xfrm if_id 1 link_dev eth15
Note: LWT_XFRM_LINK uses NLA_U32 similar to IFLA_XFRM_LINK even though
internally "link" is signed. This is consistent with other _LINK
attributes in other devices as well as in bpf and should not have an
effect as device indexes can't be negative.
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This commit adds support for 'collect_md' mode on xfrm interfaces.
Each net can have one collect_md device, created by providing the
IFLA_XFRM_COLLECT_METADATA flag at creation. This device cannot be
altered and has no if_id or link device attributes.
On transmit to this device, the if_id is fetched from the attached dst
metadata on the skb. If exists, the link property is also fetched from
the metadata. The dst metadata type used is METADATA_XFRM which holds
these properties.
On the receive side, xfrmi_rcv_cb() populates a dst metadata for each
packet received and attaches it to the skb. The if_id used in this case is
fetched from the xfrm state, and the link is fetched from the incoming
device. This information can later be used by upper layers such as tc,
ebpf, and ip rules.
Because the skb is scrubed in xfrmi_rcv_cb(), the attachment of the dst
metadata is postponed until after scrubing. Similarly, xfrm_input() is
adapted to avoid dropping metadata dsts by only dropping 'valid'
(skb_valid_dst(skb) == true) dsts.
Policy matching on packets arriving from collect_md xfrmi devices is
done by using the xfrm state existing in the skb's sec_path.
The xfrm_if_cb.decode_cb() interface implemented by xfrmi_decode_session()
is changed to keep the details of the if_id extraction tucked away
in xfrm_interface.c.
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
net/dsa/dsa2.c
commit afb3cc1a397d ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails")
commit e83d56537859 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master")
https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/
drivers/net/ethernet/intel/ice/ice.h
commit 97b0129146b1 ("ice: Fix error with handling of bonding MTU")
commit 43113ff73453 ("ice: add TTY for GNSS module for E810T device")
https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/
drivers/staging/gdm724x/gdm_lte.c
commit fc7f750dc9d1 ("staging: gdm724x: fix use after free in gdm_lte_rx()")
commit 4bcc4249b4cf ("staging: Use netif_rx().")
https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net/batman-adv/hard-interface.c
commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check")
commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message")
https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/
net/smc/af_smc.c
commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails")
commit 462791bbfa35 ("net/smc: add sysctl interface for SMC")
https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Right now, skb->tstamp is reset to 0 whenever the skb is forwarded.
If skb->tstamp has the mono delivery_time, clearing it can hurt
the performance when it finally transmits out to fq@phy-dev.
The earlier patch added a skb->mono_delivery_time bit to
flag the skb->tstamp carrying the mono delivery_time.
This patch adds skb_clear_tstamp() helper which keeps
the mono delivery_time and clears everything else.
The delivery_time clearing will be postponed until the stack knows the
skb will be delivered locally. It will be done in a latter patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
in tunnel mode, if outer interface(ipv4) is less, it is easily to let
inner IPV6 mtu be less than 1280. If so, a Packet Too Big ICMPV6 message
is received. When send again, packets are fragmentized with 1280, they
are still rejected with ICMPV6(Packet Too Big) by xfrmi_xmit2().
According to RFC4213 Section3.2.2:
if (IPv4 path MTU - 20) is less than 1280
if packet is larger than 1280 bytes
Send ICMPv6 "packet too big" with MTU=1280
Drop packet
else
Encapsulate but do not set the Don't Fragment
flag in the IPv4 header. The resulting IPv4
packet might be fragmented by the IPv4 layer
on the encapsulator or by some router along
the IPv4 path.
endif
else
if packet is larger than (IPv4 path MTU - 20)
Send ICMPv6 "packet too big" with
MTU = (IPv4 path MTU - 20).
Drop packet.
else
Encapsulate and set the Don't Fragment flag
in the IPv4 header.
endif
endif
Packets should be fragmentized with ipv4 outer interface, so change it.
After it is fragemtized with ipv4, there will be double fragmenation.
No.48 & No.51 are ipv6 fragment packets, No.48 is double fragmentized,
then tunneled with IPv4(No.49& No.50), which obey spec. And received peer
cannot decrypt it rightly.
48 2002::10 2002::11 1296(length) IPv6 fragment (off=0 more=y ident=0xa20da5bc nxt=50)
49 0x0000 (0) 2002::10 2002::11 1304 IPv6 fragment (off=0 more=y ident=0x7448042c nxt=44)
50 0x0000 (0) 2002::10 2002::11 200 ESP (SPI=0x00035000)
51 2002::10 2002::11 180 Echo (ping) request
52 0x56dc 2002::10 2002::11 248 IPv6 fragment (off=1232 more=n ident=0xa20da5bc nxt=50)
xfrm6_noneed_fragment has fixed above issues. Finally, it acted like below:
1 0x6206 192.168.1.138 192.168.1.1 1316 Fragmented IP protocol (proto=Encap Security Payload 50, off=0, ID=6206) [Reassembled in #2]
2 0x6206 2002::10 2002::11 88 IPv6 fragment (off=0 more=y ident=0x1f440778 nxt=50)
3 0x0000 2002::10 2002::11 248 ICMPv6 Echo (ping) request
Signed-off-by: Lina Wang <lina.wang@mediatek.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
if_id will be always 0, because it was not yet initialized.
Fixes: 8dce43919566 ("xfrm: interface with if_id 0 should return error")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
xfrm interface if_id = 0 would cause xfrm policy lookup errors since
Commit 9f8550e4bd9d.
Now explicitly fail to create an xfrm interface when if_id = 0
With this commit:
ip link add ipsec0 type xfrm dev lo if_id 0
Error: if_id must be non zero.
v1->v2 change:
- add Fixes: tag
Fixes: 9f8550e4bd9d ("xfrm: fix disable_xfrm sysctl when used on xfrm interfaces")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
Frag needed should only be sent if the header enables DF.
This fix allows packets larger than MTU to pass the xfrm interface
and be fragmented after encapsulation, aligning behavior with
non-interface xfrm.
Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Underlying xfrm output supports gso packets.
Declare support in hw_features and adapt the xmit MTU check to pass GSO
packets.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Commit d3fd65484c781 ("net: core: add dev_sw_netstats_tx_add") has added
function "dev_sw_netstats_tx_add()" to update net device per-cpu TX
stats.
Use this function instead of own code.
While on it, remove xfrmi_get_stats64() and replace it with
dev_get_tstats64().
Signed-off-by: Lev Stipakov <lev@openvpn.net>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20201113215939.147007-1-lev@openvpn.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
1) Fix packet receiving of standard IP tunnels when the xfrm_interface
module is installed. From Xin Long.
2) Fix a race condition between spi allocating and hash list
resizing. From zhuoliang zhang.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplify the code by using new function dev_fetch_sw_netstats().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/a6b816f4-bbf2-9db0-d59a-7e4e9cc808fe@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As Nicolas noticed in his case, when xfrm_interface module is installed
the standard IP tunnels will break in receiving packets.
This is caused by the IP tunnel handlers with a higher priority in xfrm
interface processing incoming packets by xfrm_input(), which would drop
the packets and return 0 instead when anything wrong happens.
Rather than changing xfrm_input(), this patch is to adjust the priority
for the IP tunnel handlers in xfrm interface, so that the packets would
go to xfrmi's later than the others', as the others' would not drop the
packets when the handlers couldn't process them.
Note that IPCOMP also defines its own IPIP tunnel handler and it calls
xfrm_input() as well, so we must make its priority lower than xfrmi's,
which means having xfrmi loaded would still break IPCOMP. We may seek
another way to fix it in xfrm_input() in the future.
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Fixes: da9bbf0598c9 ("xfrm: interface: support IPIP and IPIP6 tunnels processing with .cb_handler")
FIxes: d7b360c2869f ("xfrm: interface: support IP6IP6 and IP6IP tunnels processing with .cb_handler")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
use new helper for netstats settings
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
xfrm interfaces currently test for !skb->ignore_df when deciding
whether to update the pmtu on the skb's dst. Because of this, no pmtu
exception is created when we do something like:
ping -s 1438 <dest>
By dropping this check, the pmtu exception will be created and the
next ping attempt will work.
Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2020-07-30
Please note that I did the first time now --no-ff merges
of my testing branch into the master branch to include
the [PATCH 0/n] message of a patchset. Please let me
know if this is desirable, or if I should do it any
different.
1) Introduce a oseq-may-wrap flag to disable anti-replay
protection for manually distributed ICVs as suggested
in RFC 4303. From Petr Vaněk.
2) Patchset to fully support IPCOMP for vti4, vti6 and
xfrm interfaces. From Xin Long.
3) Switch from a linear list to a hash list for xfrm interface
lookups. From Eyal Birger.
4) Fixes to not register one xfrm(6)_tunnel object twice.
From Xin Long.
5) Fix two compile errors that were introduced with the
IPCOMP support for vti and xfrm interfaces.
Also from Xin Long.
6) Make the policy hold queue work with VTI. This was
forgotten when VTI was implemented.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
kernel test robot reported some compile errors:
ia64-linux-ld: net/xfrm/xfrm_interface.o: in function `xfrmi4_fini':
net/xfrm/xfrm_interface.c:900: undefined reference to `xfrm4_tunnel_deregister'
ia64-linux-ld: net/xfrm/xfrm_interface.c:901: undefined reference to `xfrm4_tunnel_deregister'
ia64-linux-ld: net/xfrm/xfrm_interface.o: in function `xfrmi4_init':
net/xfrm/xfrm_interface.c:873: undefined reference to `xfrm4_tunnel_register'
ia64-linux-ld: net/xfrm/xfrm_interface.c:876: undefined reference to `xfrm4_tunnel_register'
ia64-linux-ld: net/xfrm/xfrm_interface.c:885: undefined reference to `xfrm4_tunnel_deregister'
This happened when set CONFIG_XFRM_INTERFACE=y and CONFIG_INET_TUNNEL=m.
We don't really want xfrm_interface to depend inet_tunnel completely,
but only to disable the tunnel code when inet_tunnel is not seen.
So instead of adding "select INET_TUNNEL" for XFRM_INTERFACE, this patch
is only to change to IS_REACHABLE to avoid these compile error.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: da9bbf0598c9 ("xfrm: interface: support IPIP and IPIP6 tunnels processing with .cb_handler")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
As we did in the last 2 patches for vti(6), this patch is to define a
new xfrm_tunnel object 'xfrmi_ipip6_handler' to register for AF_INET6,
and a new xfrm6_tunnel object 'xfrmi_ip6ip_handler' to register for
AF_INET.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
xfrmi_lookup() is called on every packet. Using a single list for
looking up if_id becomes a bottleneck when having many xfrm interfaces.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The xfrmi context exists in the netdevice priv context.
Avoid looking for it in a separate list.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Similar to ip_vti, IPIP and IPIP6 tunnels processing can easily
be done with .cb_handler for xfrm interface.
v1->v2:
- no change.
v2-v3:
- enable it only when CONFIG_INET_XFRM_TUNNEL is defined, to fix the
build error, reported by kbuild test robot.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Similar to ip6_vti, IP6IP6 and IP6IP tunnels processing can easily
be done with .cb_handler for xfrm interface.
v1->v2:
- no change.
v2-v3:
- enable it only when CONFIG_INET6_XFRM_TUNNEL is defined, to fix
the build error, reported by kbuild test robot.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The xfrm interface uses skb->protocol to determine packet type, and
bails out if it's not set. For AF_PACKET injection, we need to support
its call chain of:
packet_sendmsg -> packet_snd -> packet_parse_headers ->
dev_parse_header_protocol -> parse_protocol
Without a valid parse_protocol, this returns zero, and xfrmi rejects the
skb. So, this wires up the ip_tunnel handler for layer 3 packets for
that case.
Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.
The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support for encapsulation of ESP over UDPv6. The code
is very similar to the IPv4 encapsulation implementation, and allows
to easily add espintcp on IPv6 as a follow-up.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
I don't see any reason to do this. Maybe needed before
commit 56c5ee1a5823 ("xfrm interface: fix memory leak on creation").
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Here is the steps to reproduce the problem:
ip netns add foo
ip netns add bar
ip -n foo link add xfrmi0 type xfrm dev lo if_id 42
ip -n foo link set xfrmi0 netns bar
ip netns del foo
ip netns del bar
Which results to:
[ 186.686395] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bd3: 0000 [#1] SMP PTI
[ 186.687665] CPU: 7 PID: 232 Comm: kworker/u16:2 Not tainted 5.6.0+ #1
[ 186.688430] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
[ 186.689420] Workqueue: netns cleanup_net
[ 186.689903] RIP: 0010:xfrmi_dev_uninit+0x1b/0x4b [xfrm_interface]
[ 186.690657] Code: 44 f6 ff ff 31 c0 5b 5d 41 5c 41 5d 41 5e c3 48 8d 8f c0 08 00 00 8b 05 ce 14 00 00 48 8b 97 d0 08 00 00 48 8b 92 c0 0e 00 00 <48> 8b 14 c2 48 8b 02 48 85 c0 74 19 48 39 c1 75 0c 48 8b 87 c0 08
[ 186.692838] RSP: 0018:ffffc900003b7d68 EFLAGS: 00010286
[ 186.693435] RAX: 000000000000000d RBX: ffff8881b0f31000 RCX: ffff8881b0f318c0
[ 186.694334] RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000246 RDI: ffff8881b0f31000
[ 186.695190] RBP: ffffc900003b7df0 R08: ffff888236c07740 R09: 0000000000000040
[ 186.696024] R10: ffffffff81fce1b8 R11: 0000000000000002 R12: ffffc900003b7d80
[ 186.696859] R13: ffff8881edcc6a40 R14: ffff8881a1b6e780 R15: ffffffff81ed47c8
[ 186.697738] FS: 0000000000000000(0000) GS:ffff888237dc0000(0000) knlGS:0000000000000000
[ 186.698705] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 186.699408] CR2: 00007f2129e93148 CR3: 0000000001e0a000 CR4: 00000000000006e0
[ 186.700221] Call Trace:
[ 186.700508] rollback_registered_many+0x32b/0x3fd
[ 186.701058] ? __rtnl_unlock+0x20/0x3d
[ 186.701494] ? arch_local_irq_save+0x11/0x17
[ 186.702012] unregister_netdevice_many+0x12/0x55
[ 186.702594] default_device_exit_batch+0x12b/0x150
[ 186.703160] ? prepare_to_wait_exclusive+0x60/0x60
[ 186.703719] cleanup_net+0x17d/0x234
[ 186.704138] process_one_work+0x196/0x2e8
[ 186.704652] worker_thread+0x1a4/0x249
[ 186.705087] ? cancel_delayed_work+0x92/0x92
[ 186.705620] kthread+0x105/0x10f
[ 186.706000] ? __kthread_bind_mask+0x57/0x57
[ 186.706501] ret_from_fork+0x35/0x40
[ 186.706978] Modules linked in: xfrm_interface nfsv3 nfs_acl auth_rpcgss nfsv4 nfs lockd grace fscache sunrpc button parport_pc parport serio_raw evdev pcspkr loop ext4 crc16 mbcache jbd2 crc32c_generic 8139too ide_cd_mod cdrom ide_gd_mod ata_generic ata_piix libata scsi_mod piix psmouse i2c_piix4 ide_core 8139cp i2c_core mii floppy
[ 186.710423] ---[ end trace 463bba18105537e5 ]---
The problem is that x-netns xfrm interface are not removed when the link
netns is removed. This causes later this oops when thoses interfaces are
removed.
Let's add a handler to remove all interfaces related to a netns when this
netns is removed.
Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
Reported-by: Christophe Gouault <christophe.gouault@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Because xfrmi is calling icmp from network device context, it should use
the ndo helper so that the rate limiting applies correctly.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
With an ebpf program that redirects packets through a xfrm interface,
packets are dropped because no dst is attached to skb.
This could also be reproduced with an AF_PACKET socket, with the following
python script (xfrm1 is a xfrm interface):
import socket
send_s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, 0)
# scapy
# p = IP(src='10.100.0.2', dst='10.200.0.1')/ICMP(type='echo-request')
# raw(p)
req = b'E\x00\x00\x1c\x00\x01\x00\x00@\x01e\xb2\nd\x00\x02\n\xc8\x00\x01\x08\x00\xf7\xff\x00\x00\x00\x00'
send_s.sendto(req, ('xfrm1', 0x800, 0, 0))
It was also not possible to send an ip packet through an AF_PACKET socket
because a LL header was expected. Let's remove those LL header constraints.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2019-11-13
1) Remove a unnecessary net_exit function from the xfrm interface.
From Xin Long.
2) Assign xfrm4_udp_encap_rcv to a UDP socket only if xfrm
is configured. From Alexey Dobriyan.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit 174e23810cd31
("sk_buff: drop all skb extensions on free and skb scrubbing") made napi
recycle always drop skb extensions. The additional skb_ext_del() that is
performed via nf_reset on napi skb recycle is not needed anymore.
Most nf_reset() calls in the stack are there so queued skb won't block
'rmmod nf_conntrack' indefinitely.
This removes the skb_ext_del from nf_reset, and renames it to a more
fitting nf_reset_ct().
In a few selected places, add a call to skb_ext_reset to make sure that
no active extensions remain.
I am submitting this for "net", because we're still early in the release
cycle. The patch applies to net-next too, but I think the rename causes
needless divergence between those trees.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The xfrm_if(s) on each netns can be deleted when its xfrmi dev is
deleted. xfrmi dev's removal can happen when:
a. netns is being removed and all xfrmi devs will be deleted.
b. rtnl_link_unregister(&xfrmi_link_ops) in xfrmi_fini() when
xfrm_interface.ko is being unloaded.
So there's no need to use xfrmi_exit_net() to clean any xfrm_if up.
v1->v2:
- Fix some changelog.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
With the current implementation, phydev cannot be removed:
$ ip link add dummy type dummy
$ ip link add xfrm1 type xfrm dev dummy if_id 1
$ ip l d dummy
kernel:[77938.465445] unregister_netdevice: waiting for dummy to become free. Usage count = 1
Manage it like in ip tunnels, ie just keep the ifindex. Not that the side
effect, is that the phydev is now optional.
Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
dev_net(dev) is the netns of the device and xi->net is the link netns,
where the device has been linked.
changelink() must operate in the link netns to avoid a corruption of
the xfrm lists.
Note that xi->net and dev_net(xi->physdev) are always the same.
Before the patch, the xfrmi lists may be corrupted and can later trigger a
kernel panic.
Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
Reported-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The ifname is copied when the interface is created, but is never updated
later. In fact, this property is used only in one error message, where the
netdevice pointer is available, thus let's use it.
Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The new parameters must not be stored in the netdev_priv() before
validation, it may corrupt the interface. Note also that if data is NULL,
only a memset() is done.
$ ip link add xfrm1 type xfrm dev lo if_id 1
$ ip link add xfrm2 type xfrm dev lo if_id 2
$ ip link set xfrm1 type xfrm dev lo if_id 2
RTNETLINK answers: File exists
$ ip -d link list dev xfrm1
5: xfrm1@lo: <NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/none 00:00:00:00:00:00 brd 00:00:00:00:00:00 promiscuity 0 minmtu 68 maxmtu 1500
xfrm if_id 0x2 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
=> "if_id 0x2"
Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Two cases of overlapping changes, nothing fancy.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The following commands produce a backtrace and return an error but the xfrm
interface is created (in the wrong netns):
$ ip netns add foo
$ ip netns add bar
$ ip -n foo netns set bar 0
$ ip -n foo link add xfrmi0 link-netnsid 0 type xfrm dev lo if_id 23
RTNETLINK answers: Invalid argument
$ ip -n bar link ls xfrmi0
2: xfrmi0@lo: <NOARP,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/none 00:00:00:00:00:00 brd 00:00:00:00:00:00
Here is the backtrace:
[ 79.879174] WARNING: CPU: 0 PID: 1178 at net/core/dev.c:8172 rollback_registered_many+0x86/0x3c1
[ 79.880260] Modules linked in: xfrm_interface nfsv3 nfs_acl auth_rpcgss nfsv4 nfs lockd grace sunrpc fscache button parport_pc parport serio_raw evdev pcspkr loop ext4 crc16 mbcache jbd2 crc32c_generic ide_cd_mod ide_gd_mod cdrom ata_$
eneric ata_piix libata scsi_mod 8139too piix psmouse i2c_piix4 ide_core 8139cp mii i2c_core floppy
[ 79.883698] CPU: 0 PID: 1178 Comm: ip Not tainted 5.2.0-rc6+ #106
[ 79.884462] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[ 79.885447] RIP: 0010:rollback_registered_many+0x86/0x3c1
[ 79.886120] Code: 01 e8 d7 7d c6 ff 0f 0b 48 8b 45 00 4c 8b 20 48 8d 58 90 49 83 ec 70 48 8d 7b 70 48 39 ef 74 44 8a 83 d0 04 00 00 84 c0 75 1f <0f> 0b e8 61 cd ff ff 48 b8 00 01 00 00 00 00 ad de 48 89 43 70 66
[ 79.888667] RSP: 0018:ffffc900015ab740 EFLAGS: 00010246
[ 79.889339] RAX: ffff8882353e5700 RBX: ffff8882353e56a0 RCX: ffff8882353e5710
[ 79.890174] RDX: ffffc900015ab7e0 RSI: ffffc900015ab7e0 RDI: ffff8882353e5710
[ 79.891029] RBP: ffffc900015ab7e0 R08: ffffc900015ab7e0 R09: ffffc900015ab7e0
[ 79.891866] R10: ffffc900015ab7a0 R11: ffffffff82233fec R12: ffffc900015ab770
[ 79.892728] R13: ffffffff81eb7ec0 R14: ffff88822ed6cf00 R15: 00000000ffffffea
[ 79.893557] FS: 00007ff350f31740(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
[ 79.894581] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 79.895317] CR2: 00000000006c8580 CR3: 000000022c272000 CR4: 00000000000006f0
[ 79.896137] Call Trace:
[ 79.896464] unregister_netdevice_many+0x12/0x6c
[ 79.896998] __rtnl_newlink+0x6e2/0x73b
[ 79.897446] ? __kmalloc_node_track_caller+0x15e/0x185
[ 79.898039] ? pskb_expand_head+0x5f/0x1fe
[ 79.898556] ? stack_access_ok+0xd/0x2c
[ 79.899009] ? deref_stack_reg+0x12/0x20
[ 79.899462] ? stack_access_ok+0xd/0x2c
[ 79.899927] ? stack_access_ok+0xd/0x2c
[ 79.900404] ? __module_text_address+0x9/0x4f
[ 79.900910] ? is_bpf_text_address+0x5/0xc
[ 79.901390] ? kernel_text_address+0x67/0x7b
[ 79.901884] ? __kernel_text_address+0x1a/0x25
[ 79.902397] ? unwind_get_return_address+0x12/0x23
[ 79.903122] ? __cmpxchg_double_slab.isra.37+0x46/0x77
[ 79.903772] rtnl_newlink+0x43/0x56
[ 79.904217] rtnetlink_rcv_msg+0x200/0x24c
In fact, each time a xfrm interface was created, a netdev was allocated
by __rtnl_newlink()/rtnl_create_link() and then another one by
xfrmi_newlink()/xfrmi_create(). Only the second one was registered, it's
why the previous commands produce a backtrace: dev_change_net_namespace()
was called on a netdev with reg_state set to NETREG_UNINITIALIZED (the
first one).
CC: Lorenzo Colitti <lorenzo@google.com>
CC: Benedict Wong <benedictwong@google.com>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Shannon Nelson <shannon.nelson@oracle.com>
CC: Antony Antony <antony@phenome.org>
CC: Eyal Birger <eyal.birger@gmail.com>
Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
Reported-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Pointer members of an object with static storage duration, if not
explicitly initialized, will be initialized to a NULL pointer. The
net namespace API checks if this pointer is not NULL before using it,
it are safe to remove the function.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Three trivial overlapping conflicts.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This structure is now only 4 bytes, so its more efficient
to cache a copy rather than its address.
No significant size difference in allmodconfig vmlinux.
With non-modular kernel that has all XFRM options enabled, this
series reduces vmlinux image size by ~11kb. All xfrm_mode
indirections are gone and all modes are built-in.
before (ipsec-next master):
text data bss dec filename
21071494 7233140 11104324 39408958 vmlinux.master
after this series:
21066448 7226772 11104324 39397544 vmlinux.patched
With allmodconfig kernel, the size increase is only 362 bytes,
even all the xfrm config options removed in this series are
modular.
before:
text data bss dec filename
15731286 6936912 4046908 26715106 vmlinux.master
after this series:
15731492 6937068 4046908 26715468 vmlinux
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
after previous changes, xfrm_mode contains no function pointers anymore
and all modules defining such struct contain no code except an init/exit
functions to register the xfrm_mode struct with the xfrm core.
Just place the xfrm modes core and remove the modules,
the run-time xfrm_mode register/unregister functionality is removed.
Before:
text data bss dec filename
7523 200 2364 10087 net/xfrm/xfrm_input.o
40003 628 440 41071 net/xfrm/xfrm_state.o
15730338 6937080 4046908 26714326 vmlinux
7389 200 2364 9953 net/xfrm/xfrm_input.o
40574 656 440 41670 net/xfrm/xfrm_state.o
15730084 6937068 4046908 26714060 vmlinux
The xfrm*_mode_{transport,tunnel,beet} modules are gone.
v2: replace CONFIG_INET6_XFRM_MODE_* IS_ENABLED guards with CONFIG_IPV6
ones rather than removing them.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Now that we have the family available directly in the
xfrm_mode struct, we can use that and avoid one extra dereference.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
If an xfrmi is associated to a vrf layer 3 master device,
xfrm_policy_check() fails after traffic decapsulation. The input
interface is replaced by the layer 3 master device, and hence
xfrmi_decode_session() can't match the xfrmi anymore to satisfy
policy checking.
Extend ingress xfrmi lookup to honor the original layer 3 slave
device, allowing xfrm interfaces to operate within a vrf domain.
Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
After moving an XFRM interface to another namespace it stays associated
with the original namespace (net in `struct xfrm_if` and the list keyed
with `xfrmi_net_id`), allowing processes in the new namespace to use
SAs/policies that were created in the original namespace. For instance,
this allows a keying daemon in one namespace to establish IPsec SAs for
other namespaces without processes there having access to the keys or IKE
credentials.
This worked fine for outbound traffic, however, for inbound traffic the
lookup for the interfaces and the policies used the incorrect namespace
(the one the XFRM interface was moved to).
Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Will reduce noise when skb->sp is removed later in this series.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
