| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit cb8afea4655ff004fa7feee825d5c79783525383 ]
cfg80211_is_element_inherited() reads the first data octet of the
candidate element (id = elem->data[0]) to look it up in an extension
non-inheritance list. It does so after testing elem->id, but without
verifying that the element actually has a data octet. A zero-length
extension element (WLAN_EID_EXTENSION with length 0) therefore makes it
read one octet past the end of the element.
_ieee802_11_parse_elems_full() runs this check for every element of a
frame once a non-inheritance context exists -- e.g. while parsing a
per-STA profile of a Multi-Link element in a (re)association response,
or a non-transmitted BSS profile -- so a crafted frame from an AP can
trigger a one-octet slab-out-of-bounds read during element parsing:
BUG: KASAN: slab-out-of-bounds in cfg80211_is_element_inherited
Read of size 1 ... in net/wireless/scan.c
Return early (treat the element as inherited) when an extension element
carries no data, mirroring the existing handling of empty ID lists.
The bug was found by fuzzing ieee802_11_parse_elems_full() under KASAN.
Fixes: f7dacfb11475 ("cfg80211: support non-inheritance element")
Signed-off-by: HE WEI (ギカク) <skyexpoc@gmail.com>
Link: https://patch.msgid.link/20260707094828.16465-1-skyexpoc@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 69ef6a7ec277f16d216be8da2b3cbe872786c999 ]
PMSR FTM location request flags are syntactically valid, but they must
be rejected when the device capability does not advertise support for
them.
Return an error immediately after rejecting unsupported LCI or civic
location request bits so the request cannot reach the driver.
Fixes: 9bb7e0f24e7e7 ("cfg80211: add peer measurement with FTM initiator API")
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612133710.93544-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 36230936468f0ba4930e94aef496fc229d4bb951 ]
PMSR FTM request parsing accepts preamble values outside the
enumerated nl80211 preamble range.
Reject out-of-range values before using them in the parser capability
bit test using the policy.
Fixes: 9bb7e0f24e7e7 ("cfg80211: add peer measurement with FTM initiator API")
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612133703.93274-2-enderaoelyther@gmail.com
[drop unnecessary check]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 41aa973eb05922848dded26875c55ef982ac1c49 ]
PMSR request parsing accepts missing or duplicated measurement type
entries in NL80211_PMSR_REQ_ATTR_DATA.
Track whether one measurement type was already provided, reject a
second one immediately, and return an error if the request data block
contains no measurement type at all.
Fixes: 9bb7e0f24e7e7 ("cfg80211: add peer measurement with FTM initiator API")
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612133656.92900-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7f4b01812323443b55e4c65381c9dc851ff009e3 ]
Validate each nested NL80211_ATTR_MBSSID_ELEMS entry as a well-formed
information-element stream before storing it for beacon construction.
RNR parsing already validates each nested blob with validate_ie_attr()
before storing it. Apply the same syntactic IE validation to MBSSID
entries before counting and copying their data and length pointers.
Fixes: dc1e3cb8da8b ("nl80211: MBSSID and EMA support in AP mode")
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612131854.43575-3-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 07a95ec2b54774201fdf4ef7ffb0ca2ab19ed29c ]
nl80211_parse_beacon() rejects EMA RNR data when there are fewer RNR
entries than MBSSID entries.
The rejected RNR allocation has not been attached to the beacon data yet,
so free it before returning the error.
Fixes: dbbb27e183b1 ("cfg80211: support RNR for EMA AP")
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260610112208.1308-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit edf0730be33696a1bd142792830d392129e495cc ]
cfg80211_sched_scan_results() can queue rdev->sched_scan_res_wk from a
driver result notification while a scheduled scan request is present. The
work callback recovers the containing cfg80211_registered_device and then
locks the wiphy and walks the scheduled-scan request list.
wiphy_unregister() already makes the wiphy unreachable and drains rdev work
items before cfg80211_dev_free() can release the object, but it does not
drain sched_scan_res_wk. A queued or running result work item can therefore
cross the unregister/free boundary and access freed rdev state.
The buggy scenario involves two paths, with each column showing the order
within that path:
scheduled-scan result path: unregister/free path:
1. cfg80211_sched_scan_results() 1. interface teardown stops and
queues rdev->sched_scan_res_wk. removes the scheduled scan request.
2. cfg80211_wq starts the work 2. wiphy_unregister() drains other
item and recovers rdev. rdev work items.
3. The worker locks rdev->wiphy 3. cfg80211_dev_free() destroys and
and walks rdev state. frees rdev.
Cancel sched_scan_res_wk in wiphy_unregister() alongside the other rdev
work items. cancel_work_sync() removes a pending result notification and
waits for an already running callback, so cfg80211_dev_free() cannot free
rdev while this work item is still active.
Validation reproduced this kernel report:
BUG: KASAN: use-after-free in cfg80211_sched_scan_results_wk+0x4a6/0x530
Workqueue: cfg80211 cfg80211_sched_scan_results_wk [cfg80211]
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
cfg80211_sched_scan_results_wk+0x4a6/0x530
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x224/0x430
kasan_report+0xac/0xe0
lockdep_hardirqs_on_prepare+0xea/0x1a0
process_one_work+0x8d0/0x18f0 (kernel/workqueue.c:3212)
lock_is_held_type+0x8f/0x100
worker_thread+0x5ad/0xfd0
__kthread_parkme+0xc6/0x200
kthread+0x31e/0x410
trace_hardirqs_on+0x1a/0x170
ret_from_fork+0x576/0x810
__switch_to+0x57e/0xe20
__switch_to_asm+0x33/0x70
ret_from_fork_asm+0x1a/0x30
Fixes: 807f8a8c3004 ("cfg80211/nl80211: add support for scheduled scans")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Link: https://patch.msgid.link/20260619162542.3878296-1-zzzccc427@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9dcc1af3bbf5441f71a1e51b8d81bdf38a249607 ]
The error message emitted by nl80211_validate_key_link_id() when a group
key install on an MLO wdev is missing the link ID reads "link ID must
for MLO group key", which is missing the words "be set". This makes the
error harder to grep and parse in userspace logs, and is reported
verbatim by wpa_supplicant via its nl80211 extack relay, e.g.:
wpa_supplicant: nl80211: kernel reports: link ID must for MLO group key
The sibling error strings in the same helper already use grammatical
phrasing ("link ID not allowed for pairwise key", "invalid link ID for
MLO group key", "link ID not allowed for non-MLO group key"). Fix this
one to match.
No functional change.
Fixes: e7a7b84e3317 ("wifi: cfg80211: Add link_id parameter to various key operations for MLO")
Signed-off-by: Louis Kotze <loukot@gmail.com>
Link: https://patch.msgid.link/20260414122728.92234-1-loukot@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 4cd92957e8f8cc4ebfe8a5d4203c14c592fde6b1 upstream.
nl80211_parse_rnr_elems() stores the parsed element count in a
u8-backed cfg80211_rnr_elems::cnt field and uses that count to size
the flexible array allocation.
Reject nested NL80211_ATTR_EMA_RNR_ELEMS input once the count reaches
255, before incrementing it again. This keeps the parser aligned with
the data structure it fills and matches the existing bound check used
by nl80211_parse_mbssid_elems().
Fixes: dbbb27e183b1 ("cfg80211: support RNR for EMA AP")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Assisted-by: Codex:gpt-5.4
Signed-off-by: Yuqi Xu <xuyuqiabc@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Link: https://patch.msgid.link/20260529152542.1412734-1-n05ec@lzu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7666dbb1bacc4ba522b96740cba7283d243d16e1 upstream.
cfg80211_merge_profile() reassembles a Multi-BSSID non-transmitted BSS
profile that has been split across multiple consecutive MBSSID elements.
Its while-loop calls
cfg80211_get_profile_continuation(ie, ielen, mbssid_elem, sub_elem)
but never advances mbssid_elem or sub_elem inside the body. Each
iteration therefore searches for a continuation that follows the same
fixed pair; the helper returns the same next_mbssid; and the same
next_sub bytes are memcpy()'d into merged_ie at a growing offset until
the buffer fills.
Advance both mbssid_elem and sub_elem to the just-consumed continuation
so the next call to cfg80211_get_profile_continuation() searches for a
further continuation beyond it (or returns NULL when none exists).
A specially-crafted malicious beacon can take advantage of this bug
to cause the kernel to spend an excessive amount of time in
cfg80211_merge_profile (up to as much as 2ms per beacon received),
which could theoretically be abused in some way.
Cc: stable@vger.kernel.org
Fixes: fe806e4992c9 ("cfg80211: support profile split between elements")
Signed-off-by: John Walker <johnwalker0@gmail.com>
Link: https://patch.msgid.link/20260507230720.64783-1-johnwalker0@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 4d7a05da767e5cbcf4db511b9289d7ebd380dc56 which is commit
e1696c8bd0056bc1a5f7766f58ac333adc203e8a upstream.
The reverted patch introduced a deadlock. The locking situation in mainline is
totally different, so it is incorrect to directly backport the commit from mainline.
Signed-off-by: Guocai He <guocai.he.cn@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6dccbc9f3e1d38565dff7730d2b7d1e8b16c9b09 ]
When the nl80211 socket that originated a PMSR request is
closed, cfg80211_release_pmsr() sets the request's nl_portid
to zero and schedules pmsr_free_wk to process the abort
asynchronously. If the interface is concurrently torn down
before that work runs, cfg80211_pmsr_wdev_down() calls
cfg80211_pmsr_process_abort() directly. However, the already-
scheduled pmsr_free_wk work item remains pending and may run
after the interface has been removed from the driver. This
could cause the driver's abort_pmsr callback to operate on a
torn-down interface, leading to undefined behavior and
potential crashes.
Cancel pmsr_free_wk synchronously in cfg80211_pmsr_wdev_down()
before calling cfg80211_pmsr_process_abort(). This ensures any
pending or in-progress work is drained before interface teardown
proceeds, preventing the work from invoking the driver abort
callback after the interface is gone.
Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API")
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260305160712.1263829-3-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 767d23ade706d5fa51c36168e92a9c5533c351a1 upstream.
There is a use-after-free error in cfg80211_shutdown_all_interfaces found
by syzkaller:
BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220
Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326
CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events cfg80211_rfkill_block_work
Call Trace:
<TASK>
dump_stack_lvl+0x116/0x1f0
print_report+0xcd/0x630
kasan_report+0xe0/0x110
cfg80211_shutdown_all_interfaces+0x213/0x220
cfg80211_rfkill_block_work+0x1e/0x30
process_one_work+0x9cf/0x1b70
worker_thread+0x6c8/0xf10
kthread+0x3c5/0x780
ret_from_fork+0x56d/0x700
ret_from_fork_asm+0x1a/0x30
</TASK>
The problem arises due to the rfkill_block work is not cancelled when wiphy
is being unregistered. In order to fix the issue cancel the corresponding
work in wiphy_unregister().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 1f87f7d3a3b4 ("cfg80211: add rfkill support")
Cc: stable@vger.kernel.org
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Link: https://patch.msgid.link/20260211082024.1967588-1-d.dulov@aladdin.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c854758abe0b8d86f9c43dc060ff56a0ee5b31e0 upstream.
The radiotap parser is currently only used with the radiotap
namespace (not with vendor namespaces), but if the undefined
field 18 is used, the alignment/size is unknown as well. In
this case, iterator->_next_ns_data isn't initialized (it's
only set for skipping vendor namespaces), and syzbot points
out that we later compare against this uninitialized value.
Fix this by moving the rejection of unknown radiotap fields
down to after the in-namespace lookup, so it will really use
iterator->_next_ns_data only for vendor namespaces, even in
case undefined fields are present.
Cc: stable@vger.kernel.org
Fixes: 33e5a2f776e3 ("wireless: update radiotap parser")
Reported-by: syzbot+b09c1af8764c0097bb19@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/69944a91.a70a0220.2c38d7.00fc.GAE@google.com
Link: https://patch.msgid.link/20260217120526.162647-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c8d7f21ead727485ebf965e2b4d42d4a4f0840f6 ]
The IGTK key ID must be 4 or 5, but the code checks against
key ID + 1, so must check against 5/6 rather than 4/5. Fix
that.
Reported-by: Jouni Malinen <j@w1.fi>
Fixes: 08645126dd24 ("cfg80211: implement wext key handling")
Link: https://patch.msgid.link/20260209181220.362205-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e1696c8bd0056bc1a5f7766f58ac333adc203e8a ]
Seems that there is an assumption that this function should be called
only for netdev interfaces, but it can also be called in suspend, or
from nl80211_netlink_notify (indirectly).
Note that the documentation of NL80211_ATTR_SOCKET_OWNER explicitly
says that NAN interfaces would be destroyed as well in the
nl80211_netlink_notify case.
Fix this by also stopping P2P and NAN.
Fixes: cb3b7d87652a ("cfg80211: add start / stop NAN commands")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260107140430.dab142cbef0b.I290cc47836d56dd7e35012ce06bec36c6da688cd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a3034bf0746d88a00cceda9541534a5721445a24 ]
An integer overflow occurs in cfg80211_calculate_bitrate_he() when
calculating bitrates for high throughput HE configurations.
For example, with 160 MHz bandwidth, HE-MCS 13, HE-NSS 4, and HE-GI 0,
the multiplication (result * rate->nss) overflows the 32-bit 'result'
variable before division by 8, leading to significantly underestimated
bitrate values.
The overflow occurs because the NSS multiplication operates on a 32-bit
integer that cannot accommodate intermediate values exceeding
4,294,967,295. When overflow happens, the value wraps around, producing
incorrect bitrates for high MCS and NSS combinations.
Fix this by utilizing the 64-bit 'tmp' variable for the NSS
multiplication and subsequent divisions via do_div(). This approach
preserves full precision throughout the entire calculation, with the
final value assigned to 'result' only after completing all operations.
Signed-off-by: Veerendranath Jakkam <veerendranath.jakkam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260109-he_bitrate_overflow-v1-1-95575e466b6e@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 21cbf883d073abbfe09e3924466aa5e0449e7261 upstream.
struct iw_point has a 32bit hole on 64bit arches.
struct iw_point {
void __user *pointer; /* Pointer to the data (in user space) */
__u16 length; /* number of fields or size in bytes */
__u16 flags; /* Optional params */
};
Make sure to zero the structure to avoid disclosing 32bits of kernel data
to user space.
Fixes: 87de87d5e47f ("wext: Dispatch and handle compat ioctls entirely in net/wireless/wext.c")
Reported-by: syzbot+bfc7323743ca6dbcc3d3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/695f83f3.050a0220.1c677c.0392.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260108101927.857582-1-edumazet@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2b77b9551d1184cb5af8271ff350e6e2c1b3db0d ]
The QGenie AI code review tool says we should store the capped length to
wdev->u.client.ssid_len. The AI is correct.
Fixes: 62b635dcd69c ("wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aTAbp5RleyH_lnZE@stanley.mountain
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2c5dee15239f3f3e31aa5c8808f18996c039e2c1 upstream.
Callers of wdev_chandef() must hold the wiphy mutex.
But the worker cfg80211_propagate_cac_done_wk() never takes the lock.
Which triggers the warning below with the mesh_peer_connected_dfs
test from hostapd and not (yet) released mac80211 code changes:
WARNING: CPU: 0 PID: 495 at net/wireless/chan.c:1552 wdev_chandef+0x60/0x165
Modules linked in:
CPU: 0 UID: 0 PID: 495 Comm: kworker/u4:2 Not tainted 6.14.0-rc5-wt-g03960e6f9d47 #33 13c287eeabfe1efea01c0bcc863723ab082e17cf
Workqueue: cfg80211 cfg80211_propagate_cac_done_wk
Stack:
00000000 00000001 ffffff00 6093267c
00000000 6002ec30 6d577c50 60037608
00000000 67e8d108 6063717b 00000000
Call Trace:
[<6002ec30>] ? _printk+0x0/0x98
[<6003c2b3>] show_stack+0x10e/0x11a
[<6002ec30>] ? _printk+0x0/0x98
[<60037608>] dump_stack_lvl+0x71/0xb8
[<6063717b>] ? wdev_chandef+0x60/0x165
[<6003766d>] dump_stack+0x1e/0x20
[<6005d1b7>] __warn+0x101/0x20f
[<6005d3a8>] warn_slowpath_fmt+0xe3/0x15d
[<600b0c5c>] ? mark_lock.part.0+0x0/0x4ec
[<60751191>] ? __this_cpu_preempt_check+0x0/0x16
[<600b11a2>] ? mark_held_locks+0x5a/0x6e
[<6005d2c5>] ? warn_slowpath_fmt+0x0/0x15d
[<60052e53>] ? unblock_signals+0x3a/0xe7
[<60052f2d>] ? um_set_signals+0x2d/0x43
[<60751191>] ? __this_cpu_preempt_check+0x0/0x16
[<607508b2>] ? lock_is_held_type+0x207/0x21f
[<6063717b>] wdev_chandef+0x60/0x165
[<605f89b4>] regulatory_propagate_dfs_state+0x247/0x43f
[<60052f00>] ? um_set_signals+0x0/0x43
[<605e6bfd>] cfg80211_propagate_cac_done_wk+0x3a/0x4a
[<6007e460>] process_scheduled_works+0x3bc/0x60e
[<6007d0ec>] ? move_linked_works+0x4d/0x81
[<6007d120>] ? assign_work+0x0/0xaa
[<6007f81f>] worker_thread+0x220/0x2dc
[<600786ef>] ? set_pf_worker+0x0/0x57
[<60087c96>] ? to_kthread+0x0/0x43
[<6008ab3c>] kthread+0x2d3/0x2e2
[<6007f5ff>] ? worker_thread+0x0/0x2dc
[<6006c05b>] ? calculate_sigpending+0x0/0x56
[<6003b37d>] new_thread_handler+0x4a/0x64
irq event stamp: 614611
hardirqs last enabled at (614621): [<00000000600bc96b>] __up_console_sem+0x82/0xaf
hardirqs last disabled at (614630): [<00000000600bc92c>] __up_console_sem+0x43/0xaf
softirqs last enabled at (614268): [<00000000606c55c6>] __ieee80211_wake_queue+0x933/0x985
softirqs last disabled at (614266): [<00000000606c52d6>] __ieee80211_wake_queue+0x643/0x985
Fixes: 26ec17a1dc5e ("cfg80211: Fix radar event during another phy CAC")
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Link: https://patch.msgid.link/20250717162547.94582-1-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[ The author recommends that when porting to older kernels, we should use wiphy_lock()
and wiphy_unlock() instead of guard(). ]
Signed-off-by: Alva Lan <alvalan9@foxmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 62b635dcd69c4fde7ce1de4992d71420a37e51e3 ]
If the ssid->datalen is more than IEEE80211_MAX_SSID_LEN (32) it would
lead to memory corruption so add some bounds checking.
Fixes: c38c70185101 ("wifi: cfg80211: Set SSID if it is not already set")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/0aaaae4a3ed37c6252363c34ae4904b1604e8e32.1756456951.git.dan.carpenter@linaro.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 26e84445f02ce6b2fe5f3e0e28ff7add77f35e08 ]
Following bss_free() quirk introduced in commit 776b3580178f
("cfg80211: track hidden SSID networks properly"), adjust
cfg80211_update_known_bss() to free the last beacon frame
elements only if they're not shared via the corresponding
'hidden_beacon_bss' pointer.
Reported-by: syzbot+30754ca335e6fb7e3092@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=30754ca335e6fb7e3092
Fixes: 3ab8227d3e7d ("cfg80211: refactor cfg80211_bss_update")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20250813135236.799384-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit be06a8c7313943109fa870715356503c4c709cbc ]
Management frames sent by userspace should never have the
order/HTC bit set, reject that. It could also cause some
confusion with the length of the buffer and the header so
the validation might end up wrong.
Link: https://patch.msgid.link/20250718202307.97a0455f0f35.I1805355c7e331352df16611839bc8198c855a33f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 737bb912ebbe4571195c56eba557c4d7315b26fb upstream.
This patch is a mitigation to prevent the A-MSDU spoofing vulnerability
for mesh networks. The initial update to the IEEE 802.11 standard, in
response to the FragAttacks, missed this case (CVE-2025-27558). It can
be considered a variant of CVE-2020-24588 but for mesh networks.
This patch tries to detect if a standard MSDU was turned into an A-MSDU
by an adversary. This is done by parsing a received A-MSDU as a standard
MSDU, calculating the length of the Mesh Control header, and seeing if
the 6 bytes after this header equal the start of an rfc1042 header. If
equal, this is a strong indication of an ongoing attack attempt.
This defense was tested with mac80211_hwsim against a mesh network that
uses an empty Mesh Address Extension field, i.e., when four addresses
are used, and when using a 12-byte Mesh Address Extension field, i.e.,
when six addresses are used. Functionality of normal MSDUs and A-MSDUs
was also tested, and confirmed working, when using both an empty and
12-byte Mesh Address Extension field.
It was also tested with mac80211_hwsim that A-MSDU attacks in non-mesh
networks keep being detected and prevented.
Note that the vulnerability being patched, and the defense being
implemented, was also discussed in the following paper and in the
following IEEE 802.11 presentation:
https://papers.mathyvanhoef.com/wisec2025.pdf
https://mentor.ieee.org/802.11/dcn/25/11-25-0949-00-000m-a-msdu-mesh-spoof-protection.docx
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://patch.msgid.link/20250616004635.224344-1-Mathy.Vanhoef@kuleuven.be
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fc88dee89d7b63eeb17699393eb659aadf9d9b7c upstream.
syzbort reported a uninitialize wiphy_work_lock in cfg80211_dev_free. [1]
After rfkill allocation fails, the wiphy release process will be performed,
which will cause cfg80211_dev_free to access the uninitialized wiphy_work
related data.
Move the initialization of wiphy_work to before rfkill initialization to
avoid this issue.
[1]
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 UID: 0 PID: 5935 Comm: syz-executor550 Not tainted 6.14.0-rc6-syzkaller-00103-g4003c9e78778 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
assign_lock_key kernel/locking/lockdep.c:983 [inline]
register_lock_class+0xc39/0x1240 kernel/locking/lockdep.c:1297
__lock_acquire+0x135/0x3c40 kernel/locking/lockdep.c:5103
lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x3a/0x60 kernel/locking/spinlock.c:162
cfg80211_dev_free+0x30/0x3d0 net/wireless/core.c:1196
device_release+0xa1/0x240 drivers/base/core.c:2568
kobject_cleanup lib/kobject.c:689 [inline]
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x1e4/0x5a0 lib/kobject.c:737
put_device+0x1f/0x30 drivers/base/core.c:3774
wiphy_free net/wireless/core.c:1224 [inline]
wiphy_new_nm+0x1c1f/0x2160 net/wireless/core.c:562
ieee80211_alloc_hw_nm+0x1b7a/0x2260 net/mac80211/main.c:835
mac80211_hwsim_new_radio+0x1d6/0x54e0 drivers/net/wireless/virtual/mac80211_hwsim.c:5185
hwsim_new_radio_nl+0xb42/0x12b0 drivers/net/wireless/virtual/mac80211_hwsim.c:6242
genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2533
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1882
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg net/socket.c:733 [inline]
____sys_sendmsg+0xaaf/0xc90 net/socket.c:2573
___sys_sendmsg+0x135/0x1e0 net/socket.c:2627
__sys_sendmsg+0x16e/0x220 net/socket.c:2659
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
Fixes: 72d520476a2f ("wifi: cfg80211: cancel wiphy_work before freeing wiphy")
Reported-by: syzbot+aaf0488c83d1d5f4f029@syzkaller.appspotmail.com
Close: https://syzkaller.appspot.com/bug?extid=aaf0488c83d1d5f4f029
Tested-by: syzbot+aaf0488c83d1d5f4f029@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://patch.msgid.link/tencent_258DD9121DDDB9DD9A1939CFAA0D8625B107@qq.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
defragmentation
commit 023c1f2f0609218103cbcb48e0104b144d4a16dc upstream.
Currently during the multi-link element defragmentation process, the
multi-link element length added to the total IEs length when calculating
the length of remaining IEs after the multi-link element in
cfg80211_defrag_mle(). This could lead to out-of-bounds access if the
multi-link element or its corresponding fragment elements are the last
elements in the IEs buffer.
To address this issue, correctly calculate the remaining IEs length by
deducting the multi-link element end offset from total IEs end offset.
Cc: stable@vger.kernel.org
Fixes: 2481b5da9c6b ("wifi: cfg80211: handle BSS data contained in ML probe responses")
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://patch.msgid.link/20250424-fix_mle_defragmentation_oob_access-v1-1-84412a1743fa@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 72d520476a2fab6f3489e8388ab524985d6c4b90 ]
A wiphy_work can be queued from the moment the wiphy is allocated and
initialized (i.e. wiphy_new_nm). When a wiphy_work is queued, the
rdev::wiphy_work is getting queued.
If wiphy_free is called before the rdev::wiphy_work had a chance to run,
the wiphy memory will be freed, and then when it eventally gets to run
it'll use invalid memory.
Fix this by canceling the work before freeing the wiphy.
Fixes: a3ee4dc84c4e ("wifi: cfg80211: add a work abstraction with special semantics")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250306123626.efd1d19f6e07.I48229f96f4067ef73f5b87302335e2fd750136c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 49f27f29446a5bfe633dd2cc0cfebd48a1a5e77f upstream.
It is possible to set both MONITOR_FLAG_COOK_FRAMES and MONITOR_FLAG_ACTIVE
flags simultaneously on the same monitor interface from the userspace. This
causes a sub-interface to be created with no IEEE80211_SDATA_IN_DRIVER bit
set because the monitor interface is in the cooked state and it takes
precedence over all other states. When the interface is then being deleted
the kernel calls WARN_ONCE() from check_sdata_in_driver() because of missing
that bit.
Fix this by rejecting MONITOR_FLAG_COOK_FRAMES if it is set along with
other flags.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 66f7ac50ed7c ("nl80211: Add monitor interface configuration flags")
Cc: stable@vger.kernel.org
Reported-by: syzbot+2e5c1e55b9e5c28a3da7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2e5c1e55b9e5c28a3da7
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Link: https://patch.msgid.link/20250131152657.5606-1-v.shevtsov@mt-integration.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 59b348be7597c4a9903cb003c69e37df20c04a30 upstream.
Syzbot keeps reporting an issue [1] that occurs when erroneous symbols
sent from userspace get through into user_alpha2[] via
regulatory_hint_user() call. Such invalid regulatory hints should be
rejected.
While a sanity check from commit 47caf685a685 ("cfg80211: regulatory:
reject invalid hints") looks to be enough to deter these very cases,
there is a way to get around it due to 2 reasons.
1) The way isalpha() works, symbols other than latin lower and
upper letters may be used to determine a country/domain.
For instance, greek letters will also be considered upper/lower
letters and for such characters isalpha() will return true as well.
However, ISO-3166-1 alpha2 codes should only hold latin
characters.
2) While processing a user regulatory request, between
reg_process_hint_user() and regulatory_hint_user() there happens to
be a call to queue_regulatory_request() which modifies letters in
request->alpha2[] with toupper(). This works fine for latin symbols,
less so for weird letter characters from the second part of _ctype[].
Syzbot triggers a warning in is_user_regdom_saved() by first sending
over an unexpected non-latin letter that gets malformed by toupper()
into a character that ends up failing isalpha() check.
Prevent this by enhancing is_an_alpha2() to ensure that incoming
symbols are latin letters and nothing else.
[1] Syzbot report:
------------[ cut here ]------------
Unexpected user alpha2: A�
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 is_user_regdom_saved net/wireless/reg.c:440 [inline]
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_alpha2 net/wireless/reg.c:3424 [inline]
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516
Modules linked in:
CPU: 1 UID: 0 PID: 964 Comm: kworker/1:2 Not tainted 6.12.0-rc5-syzkaller-00044-gc1e939a21eb1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: events_power_efficient crda_timeout_work
RIP: 0010:is_user_regdom_saved net/wireless/reg.c:440 [inline]
RIP: 0010:restore_alpha2 net/wireless/reg.c:3424 [inline]
RIP: 0010:restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516
...
Call Trace:
<TASK>
crda_timeout_work+0x27/0x50 net/wireless/reg.c:542
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f2/0x390 kernel/kthread.c:389
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Reported-by: syzbot+e10709ac3c44f3d4e800@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e10709ac3c44f3d4e800
Fixes: 09d989d179d0 ("cfg80211: add regulatory hint disconnect support")
Cc: stable@kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250228134659.1577656-1-n.zhandarovich@fintech.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1a0d24775cdee2b8dc14bfa4f4418c930ab1ac57 ]
In 'cfg80211_scan_6ghz()', an instances of 'struct cfg80211_colocated_ap'
are allocated as if they would have 'ssid' as trailing VLA member. Since
this is not so, extra IEEE80211_MAX_SSID_LEN bytes are not needed.
Briefly tested with KUnit.
Fixes: c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20250113155417.552587-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0fca7784b7a14d4ede64f479662afb98876ec7f8 ]
When the scan parameters for a 6GHz scan specify a unicast
BSSID address, and the corresponding AP is found in the scan
list, add a corresponding entry in the collocated AP list,
so this AP would be directly probed even if it was not
advertised as a collocated AP.
This is needed for handling a scan request that is intended
for a ML probe flow, where user space can requests a scan
to retrieve information for other links in the AP MLD.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.54b954bc02ad.I1c072793d3d77a4c8fbbc64b4db5cce1bbb00382@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: 1a0d24775cde ("wifi: cfg80211: adjust allocation of colocated AP data")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f1d3334d604cc32db63f6e2b3283011e02294e54 ]
With the __counted_by annocation in cfg80211_scan_request struct,
the "n_channels" struct member must be set before accessing the
"channels" array. Failing to do so will trigger a runtime warning
when enabling CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE.
Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Signed-off-by: Haoyu Li <lihaoyu499@gmail.com>
Link: https://patch.msgid.link/20241203152049.348806-1-lihaoyu499@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2e3dbf938656986cce73ac4083500d0bcfbffe24 ]
Since the netlink attribute range validation provides inclusive
checking, the *max* of attribute NL80211_ATTR_MLO_LINK_ID should be
IEEE80211_MLD_MAX_NUM_LINKS - 1 otherwise causing an off-by-one.
One crash stack for demonstration:
==================================================================
BUG: KASAN: wild-memory-access in ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939
Read of size 6 at addr 001102080000000c by task fuzzer.386/9508
CPU: 1 PID: 9508 Comm: syz.1.386 Not tainted 6.1.70 #2
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106
print_report+0xe0/0x750 mm/kasan/report.c:398
kasan_report+0x139/0x170 mm/kasan/report.c:495
kasan_check_range+0x287/0x290 mm/kasan/generic.c:189
memcpy+0x25/0x60 mm/kasan/shadow.c:65
ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939
rdev_tx_control_port net/wireless/rdev-ops.h:761 [inline]
nl80211_tx_control_port+0x7b3/0xc40 net/wireless/nl80211.c:15453
genl_family_rcv_msg_doit+0x22e/0x320 net/netlink/genetlink.c:756
genl_family_rcv_msg net/netlink/genetlink.c:833 [inline]
genl_rcv_msg+0x539/0x740 net/netlink/genetlink.c:850
netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508
genl_rcv+0x24/0x40 net/netlink/genetlink.c:861
netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline]
netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352
netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874
sock_sendmsg_nosec net/socket.c:716 [inline]
__sock_sendmsg net/socket.c:728 [inline]
____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499
___sys_sendmsg+0x21c/0x290 net/socket.c:2553
__sys_sendmsg net/socket.c:2582 [inline]
__do_sys_sendmsg net/socket.c:2591 [inline]
__se_sys_sendmsg+0x19e/0x270 net/socket.c:2589
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Update the policy to ensure correct validation.
Fixes: 7b0a0e3c3a88 ("wifi: cfg80211: do some rework towards MLO link APIs")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Suggested-by: Cengiz Can <cengiz.can@canonical.com>
Link: https://patch.msgid.link/20241130170526.96698-1-linma@zju.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d5fee261dfd9e17b08b1df8471ac5d5736070917 upstream.
When we free wdev->cqm_config when unregistering, we also
need to clear out the pointer since the same wdev/netdev
may get re-registered in another network namespace, then
destroyed later, running this code again, which results in
a double-free.
Reported-by: syzbot+36218cddfd84b5cc263e@syzkaller.appspotmail.com
Fixes: 37c20b2effe9 ("wifi: cfg80211: fix cqm_config access race")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20241022161742.7c34b2037726.I121b9cdb7eb180802eafc90b493522950d57ee18@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 56440d7ec28d60f8da3bfa09062b3368ff9b16db ]
While running net selftests with CONFIG_PROVE_RCU_LIST=y I saw
one lockdep splat [1].
genlmsg_mcast() uses for_each_net_rcu(), and must therefore hold RCU.
Instead of letting all callers guard genlmsg_multicast_allns()
with a rcu_read_lock()/rcu_read_unlock() pair, do it in genlmsg_mcast().
This also means the @flags parameter is useless, we need to always use
GFP_ATOMIC.
[1]
[10882.424136] =============================
[10882.424166] WARNING: suspicious RCU usage
[10882.424309] 6.12.0-rc2-virtme #1156 Not tainted
[10882.424400] -----------------------------
[10882.424423] net/netlink/genetlink.c:1940 RCU-list traversed in non-reader section!!
[10882.424469]
other info that might help us debug this:
[10882.424500]
rcu_scheduler_active = 2, debug_locks = 1
[10882.424744] 2 locks held by ip/15677:
[10882.424791] #0: ffffffffb6b491b0 (cb_lock){++++}-{3:3}, at: genl_rcv (net/netlink/genetlink.c:1219)
[10882.426334] #1: ffffffffb6b49248 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg (net/netlink/genetlink.c:61 net/netlink/genetlink.c:57 net/netlink/genetlink.c:1209)
[10882.426465]
stack backtrace:
[10882.426805] CPU: 14 UID: 0 PID: 15677 Comm: ip Not tainted 6.12.0-rc2-virtme #1156
[10882.426919] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[10882.427046] Call Trace:
[10882.427131] <TASK>
[10882.427244] dump_stack_lvl (lib/dump_stack.c:123)
[10882.427335] lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822)
[10882.427387] genlmsg_multicast_allns (net/netlink/genetlink.c:1940 (discriminator 7) net/netlink/genetlink.c:1977 (discriminator 7))
[10882.427436] l2tp_tunnel_notify.constprop.0 (net/l2tp/l2tp_netlink.c:119) l2tp_netlink
[10882.427683] l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:253) l2tp_netlink
[10882.427748] genl_family_rcv_msg_doit (net/netlink/genetlink.c:1115)
[10882.427834] genl_rcv_msg (net/netlink/genetlink.c:1195 net/netlink/genetlink.c:1210)
[10882.427877] ? __pfx_l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:186) l2tp_netlink
[10882.427927] ? __pfx_genl_rcv_msg (net/netlink/genetlink.c:1201)
[10882.427959] netlink_rcv_skb (net/netlink/af_netlink.c:2551)
[10882.428069] genl_rcv (net/netlink/genetlink.c:1220)
[10882.428095] netlink_unicast (net/netlink/af_netlink.c:1332 net/netlink/af_netlink.c:1357)
[10882.428140] netlink_sendmsg (net/netlink/af_netlink.c:1901)
[10882.428210] ____sys_sendmsg (net/socket.c:729 (discriminator 1) net/socket.c:744 (discriminator 1) net/socket.c:2607 (discriminator 1))
Fixes: 33f72e6f0c67 ("l2tp : multicast notification to the registered listeners")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Cc: Tom Parkin <tparkin@katalix.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241011171217.3166614-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 20361712880396e44ce80aaeec2d93d182035651 ]
When starting CAC in a mode other than AP mode, it return a
"WARNING: CPU: 0 PID: 63 at cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]"
caused by the chandef.chan being null at the end of CAC.
Solution: Ensure the channel definition is set for the different modes
when starting CAC to avoid getting a NULL 'chan' at the end of CAC.
Call Trace:
? show_regs.part.0+0x14/0x16
? __warn+0x67/0xc0
? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]
? report_bug+0xa7/0x130
? exc_overflow+0x30/0x30
? handle_bug+0x27/0x50
? exc_invalid_op+0x18/0x60
? handle_exception+0xf6/0xf6
? exc_overflow+0x30/0x30
? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]
? exc_overflow+0x30/0x30
? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]
? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211]
? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211]
? process_one_work+0x165/0x280
? worker_thread+0x120/0x3f0
? kthread+0xc2/0xf0
? process_one_work+0x280/0x280
? kthread_complete_and_exit+0x20/0x20
? ret_from_fork+0x19/0x24
Reported-by: Kretschmer Mathias <mathias.kretschmer@fit.fraunhofer.de>
Signed-off-by: Issam Hamdi <ih@simonwunderlich.de>
Link: https://patch.msgid.link/20240816142418.3381951-1-ih@simonwunderlich.de
[shorten subject, remove OCB, reorder cases to match previous list]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 15ea13b1b1fbf6364d4cd568e65e4c8479632999 ]
Although not reproduced in practice, these two cases may be
considered by UBSAN as off-by-one errors. So fix them in the
same way as in commit a26a5107bc52 ("wifi: cfg80211: fix UBSAN
noise in cfg80211_wext_siwscan()").
Fixes: 807f8a8c3004 ("cfg80211/nl80211: add support for scheduled scans")
Fixes: 5ba63533bbf6 ("cfg80211: fix alignment problem in scan request")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20240909090806.1091956-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a26a5107bc52922cf5f67361e307ad66547b51c7 ]
Looking at https://syzkaller.appspot.com/bug?extid=1a3986bbd3169c307819
and running reproducer with CONFIG_UBSAN_BOUNDS, I've noticed the
following:
[ T4985] UBSAN: array-index-out-of-bounds in net/wireless/scan.c:3479:25
[ T4985] index 164 is out of range for type 'struct ieee80211_channel *[]'
<...skipped...>
[ T4985] Call Trace:
[ T4985] <TASK>
[ T4985] dump_stack_lvl+0x1c2/0x2a0
[ T4985] ? __pfx_dump_stack_lvl+0x10/0x10
[ T4985] ? __pfx__printk+0x10/0x10
[ T4985] __ubsan_handle_out_of_bounds+0x127/0x150
[ T4985] cfg80211_wext_siwscan+0x11a4/0x1260
<...the rest is not too useful...>
Even if we do 'creq->n_channels = n_channels' before 'creq->ssids =
(void *)&creq->channels[n_channels]', UBSAN treats the latter as
off-by-one error. Fix this by using pointer arithmetic rather than
an expression with explicit array indexing and use convenient
'struct_size()' to simplify the math here and in 'kzalloc()' above.
Fixes: 5ba63533bbf6 ("cfg80211: fix alignment problem in scan request")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20240905150400.126386-1-dmantipov@yandex.ru
[fix coding style for multi-line calculation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This reverts commit 268f84a827534c4e4c2540a4e29daa73359fc0a5 which is
commmit 1474bc87fe57deac726cc10203f73daa6c3212f7 upstream.
The reverted commit is based on implementation of wiphy locking that isn't
planned to redo on a stable kernel, so revert it to avoid warning:
WARNING: CPU: 0 PID: 9 at net/wireless/core.h:231 disconnect_work+0xb8/0x144 [cfg80211]
CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.6.51-00141-ga1649b6f8ed6 #7
Hardware name: Freescale i.MX6 SoloX (Device Tree)
Workqueue: events disconnect_work [cfg80211]
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from __warn+0x70/0x1c0
__warn from warn_slowpath_fmt+0x16c/0x294
warn_slowpath_fmt from disconnect_work+0xb8/0x144 [cfg80211]
disconnect_work [cfg80211] from process_one_work+0x204/0x620
process_one_work from worker_thread+0x1b0/0x474
worker_thread from kthread+0x10c/0x12c
kthread from ret_from_fork+0x14/0x24
Reported-by: petter@technux.se
Closes: https://lore.kernel.org/linux-wireless/9e98937d781c990615ef27ee0c858ff9@technux.se/T/#t
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7f12e26a194d0043441f870708093d9c2c3bad7d ]
Jiazi Li reported that they occasionally see hash table duplicates
as evidenced by the WARN_ON() in rb_insert_bss() in this code. It
isn't clear how that happens, nor have I been able to reproduce it,
but if it does happen, the kernel crashes later, when it tries to
unhash the entry that's now not hashed.
Try to make this situation more survivable by removing the BSS from
the list(s) as well, that way it's fully leaked here (as had been
the intent in the hash insert error path), and no longer reachable
through the list(s) so it shouldn't be unhashed again later.
Link: https://lore.kernel.org/r/20231026013528.GA24122@Jiazi.Li
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240607181726.36835-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1474bc87fe57deac726cc10203f73daa6c3212f7 ]
This might seem pretty pointless rather than changing the locking
immediately, but it seems safer to run for a while with checks and
the old locking scheme, and then remove the wdev lock later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d1cba2ea8121e7fdbe1328cea782876b1dd80993 ]
syzbot is able to trigger softlockups, setting NL80211_ATTR_TXQ_QUANTUM
to 2^31.
We had a similar issue in sch_fq, fixed with commit
d9e15a273306 ("pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM")
watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [kworker/1:0:24]
Modules linked in:
irq event stamp: 131135
hardirqs last enabled at (131134): [<ffff80008ae8778c>] __exit_to_kernel_mode arch/arm64/kernel/entry-common.c:85 [inline]
hardirqs last enabled at (131134): [<ffff80008ae8778c>] exit_to_kernel_mode+0xdc/0x10c arch/arm64/kernel/entry-common.c:95
hardirqs last disabled at (131135): [<ffff80008ae85378>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline]
hardirqs last disabled at (131135): [<ffff80008ae85378>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551
softirqs last enabled at (125892): [<ffff80008907e82c>] neigh_hh_init net/core/neighbour.c:1538 [inline]
softirqs last enabled at (125892): [<ffff80008907e82c>] neigh_resolve_output+0x268/0x658 net/core/neighbour.c:1553
softirqs last disabled at (125896): [<ffff80008904166c>] local_bh_disable+0x10/0x34 include/linux/bottom_half.h:19
CPU: 1 PID: 24 Comm: kworker/1:0 Not tainted 6.9.0-rc7-syzkaller-gfda5695d692c #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Workqueue: mld mld_ifc_work
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __list_del include/linux/list.h:195 [inline]
pc : __list_del_entry include/linux/list.h:218 [inline]
pc : list_move_tail include/linux/list.h:310 [inline]
pc : fq_tin_dequeue include/net/fq_impl.h:112 [inline]
pc : ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854
lr : __list_del_entry include/linux/list.h:218 [inline]
lr : list_move_tail include/linux/list.h:310 [inline]
lr : fq_tin_dequeue include/net/fq_impl.h:112 [inline]
lr : ieee80211_tx_dequeue+0x67c/0x3b4c net/mac80211/tx.c:3854
sp : ffff800093d36700
x29: ffff800093d36a60 x28: ffff800093d36960 x27: dfff800000000000
x26: ffff0000d800ad50 x25: ffff0000d800abe0 x24: ffff0000d800abf0
x23: ffff0000e0032468 x22: ffff0000e00324d4 x21: ffff0000d800abf0
x20: ffff0000d800abf8 x19: ffff0000d800abf0 x18: ffff800093d363c0
x17: 000000000000d476 x16: ffff8000805519dc x15: ffff7000127a6cc8
x14: 1ffff000127a6cc8 x13: 0000000000000004 x12: ffffffffffffffff
x11: ffff7000127a6cc8 x10: 0000000000ff0100 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffff80009287aa08 x4 : 0000000000000008 x3 : ffff80008034c7fc
x2 : ffff0000e0032468 x1 : 00000000da0e46b8 x0 : ffff0000e0032470
Call trace:
__list_del include/linux/list.h:195 [inline]
__list_del_entry include/linux/list.h:218 [inline]
list_move_tail include/linux/list.h:310 [inline]
fq_tin_dequeue include/net/fq_impl.h:112 [inline]
ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854
wake_tx_push_queue net/mac80211/util.c:294 [inline]
ieee80211_handle_wake_tx_queue+0x118/0x274 net/mac80211/util.c:315
drv_wake_tx_queue net/mac80211/driver-ops.h:1350 [inline]
schedule_and_wake_txq net/mac80211/driver-ops.h:1357 [inline]
ieee80211_queue_skb+0x18e8/0x2244 net/mac80211/tx.c:1664
ieee80211_tx+0x260/0x400 net/mac80211/tx.c:1966
ieee80211_xmit+0x278/0x354 net/mac80211/tx.c:2062
__ieee80211_subif_start_xmit+0xab8/0x122c net/mac80211/tx.c:4338
ieee80211_subif_start_xmit+0xe0/0x438 net/mac80211/tx.c:4532
__netdev_start_xmit include/linux/netdevice.h:4903 [inline]
netdev_start_xmit include/linux/netdevice.h:4917 [inline]
xmit_one net/core/dev.c:3531 [inline]
dev_hard_start_xmit+0x27c/0x938 net/core/dev.c:3547
__dev_queue_xmit+0x1678/0x33fc net/core/dev.c:4341
dev_queue_xmit include/linux/netdevice.h:3091 [inline]
neigh_resolve_output+0x558/0x658 net/core/neighbour.c:1563
neigh_output include/net/neighbour.h:542 [inline]
ip6_finish_output2+0x104c/0x1ee8 net/ipv6/ip6_output.c:137
ip6_finish_output+0x428/0x7a0 net/ipv6/ip6_output.c:222
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x270/0x594 net/ipv6/ip6_output.c:243
dst_output include/net/dst.h:450 [inline]
NF_HOOK+0x160/0x4f0 include/linux/netfilter.h:314
mld_sendpack+0x7b4/0x10f4 net/ipv6/mcast.c:1818
mld_send_cr net/ipv6/mcast.c:2119 [inline]
mld_ifc_work+0x840/0xd0c net/ipv6/mcast.c:2650
process_one_work+0x7b8/0x15d4 kernel/workqueue.c:3267
process_scheduled_works kernel/workqueue.c:3348 [inline]
worker_thread+0x938/0xef4 kernel/workqueue.c:3429
kthread+0x288/0x310 kernel/kthread.c:388
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860
Fixes: 52539ca89f36 ("cfg80211: Expose TXQ stats and parameters to userspace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240615160800.250667-1-edumazet@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a7e5793035792cc46a1a4b0a783655ffa897dfe9 ]
When a key is requested by userspace, there's really no need
to include the key data, the sequence counter is really what
userspace needs in this case. The fact that it's included is
just a historic quirk.
Remove the key data.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240627104411.b6a4f097e4ea.I7e6cc976cb9e8a80ef25a3351330f313373b4578@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 23daf1b4c91db9b26f8425cc7039cf96d22ccbfe ]
Setting the AP channel width is meant for use with the normal
20/40/... MHz channel width progression, and switching around
in S1G or narrow channels isn't supported. Disallow that.
Reported-by: syzbot+bc0f5b92cc7091f45fb6@syzkaller.appspotmail.com
Link: https://msgid.link/20240515141600.d4a9590bfe32.I19a32d60097e81b527eafe6b0924f6c5fbb2dc45@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit baeaabf970b9a90999f62ae27edf63f6cb86c023 ]
Individual MLO links connection status is not copied to
EVENT_CONNECT_RESULT data while processing the connect response
information in cfg80211_connect_done(). Due to this failed links
are wrongly indicated with success status in EVENT_CONNECT_RESULT.
To fix this, copy the individual MLO links status to the
EVENT_CONNECT_RESULT data.
Fixes: 53ad07e9823b ("wifi: cfg80211: support reporting failed links")
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20240724125327.3495874-1-quic_vjakkam@quicinc.com
[commit message editorial changes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bcbd771cd5d68c0c52567556097d75f9fc4e7cd6 ]
Currently NL80211_RATE_INFO_HE_RU_ALLOC_2x996 is not handled in
cfg80211_calculate_bitrate_he(), leading to below warning:
kernel: invalid HE MCS: bw:6, ru:6
kernel: WARNING: CPU: 0 PID: 2312 at net/wireless/util.c:1501 cfg80211_calculate_bitrate_he+0x22b/0x270 [cfg80211]
Fix it by handling 2x996 RU allocation in the same way as 160 MHz bandwidth.
Fixes: c4cbaf7973a7 ("cfg80211: Add support for HE")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://msgid.link/20240606020653.33205-3-quic_bqiang@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9ee0d44f055276fe2802b2f65058e920853f4f99 ]
rates_996 is mistakenly written as rates_969, fix it.
Fixes: c4cbaf7973a7 ("cfg80211: Add support for HE")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://msgid.link/20240606020653.33205-2-quic_bqiang@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0941772342d59e48733131ac3a202fa1a4d832e9 upstream.
In nl80211, we always set the ssids of a scan request to
NULL when n_ssids==0 (passive scan). Drivers have relied
on this behaviour in the past, so we fixed it in 6 GHz
scan requests as well, and added a warning so we'd have
assurance the API would always be called that way.
syzbot found that wext doesn't ensure that, so we reach
the check and trigger the warning. Fix the wext code to
set the ssids pointer to NULL when there are none.
Reported-by: syzbot+cd6135193ba6bb9ad158@syzkaller.appspotmail.com
Fixes: f7a8b10bfd61 ("wifi: cfg80211: fix 6 GHz scan request building")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6ef09cdc5ba0f93826c09d810c141a8d103a80fc ]
In 'cfg80211_wext_siwscan()', add extra check whether number of
channels passed via 'ioctl(sock, SIOCSIWSCAN, ...)' doesn't exceed
IW_MAX_FREQUENCIES and reject invalid request with -EINVAL otherwise.
Reported-by: syzbot+253cd2d2491df77c93ac@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=253cd2d2491df77c93ac
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://msgid.link/20240531032010.451295-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f7a8b10bfd614d7a9a16fbe80d28ead4f063cb00 ]
The 6 GHz scan request struct allocated by cfg80211_scan_6ghz() is
meant to be formed this way:
[base struct][channels][ssids][6ghz_params]
It is allocated with [channels] as the maximum number of channels
supported by the driver in the 6 GHz band, since allocation is
before knowing how many there will be.
However, the inner pointers are set incorrectly: initially, the
6 GHz scan parameters pointer is set:
[base struct][channels]
^ scan_6ghz_params
and later the SSID pointer is set to the end of the actually
_used_ channels.
[base struct][channels]
^ ssids
If many APs were to be discovered, and many channels used, and
there were many SSIDs, then the SSIDs could overlap the 6 GHz
parameters.
Additionally, the request->ssids for most of the function points
to the original request still (given the struct copy) but is used
normally, which is confusing.
Clear this up, by actually using the allocated space for 6 GHz
parameters _after_ the SSIDs, and set up the SSIDs initially so
they are used more clearly. Just like in nl80211.c, set them
only if there actually are SSIDs though.
Finally, also copy the elements (ie/ie_len) so they're part of
the same request, not pointing to the old request.
Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240510113738.4190692ef4ee.I0cb19188be17a8abd029805e3373c0a7777c214c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
