summaryrefslogtreecommitdiff
path: root/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2022-03-12Merge tag 'wireless-next-2022-03-11' of ↵Jakub Kicinski4-29/+336
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== brcmfmac * add BCM43454/6 support rtw89 * add support for 160 MHz channels and 6 GHz band * hardware scan support iwlwifi * support UHB TAS enablement via BIOS * remove a bunch of W=1 warnings * add support for channel switch offload * support 32 Rx AMPDU sessions in newer devices * add support for a couple of new devices * add support for band disablement via BIOS mt76 * mt7915 thermal management improvements * SAR support for more mt76 drivers * mt7986 wmac support on mt7915 ath11k * debugfs interface to configure firmware debug log level * debugfs interface to test Target Wake Time (TWT) * provide 802.11ax High Efficiency (HE) data via radiotap ath9k * use hw_random API instead of directly dumping into random.c wcn36xx * fix wcn3660 to work on 5 GHz band ath6kl * add device ID for WLU5150-D81 cfg80211/mac80211 * initial EHT (from 802.11be) support (EHT rates, 320 MHz, larger block-ack) * support disconnect on HW restart * tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits) mac80211: Add support to trigger sta disconnect on hardware restart mac80211: fix potential double free on mesh join mac80211: correct legacy rates check in ieee80211_calc_rx_airtime nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE rtw89: 8852c: process logic efuse map rtw89: 8852c: process efuse of phycap rtw89: support DAV efuse reading operation rtw89: 8852c: add chip::dle_mem rtw89: add page_regs to handle v1 chips rtw89: add chip_info::{h2c,c2h}_reg to support more chips rtw89: add hci_func_en_addr to support variant generation rtw89: add power_{on/off}_func rtw89: read chip version depends on chip ID rtw89: pci: use a struct to describe all registers address related to DMA channel rtw89: pci: add V1 of PCI channel address rtw89: pci: add struct rtw89_pci_info rtw89: 8852c: add 8852c empty files MAINTAINERS: add devicetree bindings entry for mt76 ... ==================== Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-06wireless: Use netif_rx().Sebastian Andrzej Siewior1-1/+1
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-wireless@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-2/+15
net/batman-adv/hard-interface.c commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check") commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message") https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/ net/smc/af_smc.c commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails") commit 462791bbfa35 ("net/smc: add sysctl interface for SMC") https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-03nl80211: Update bss channel on channel switch for P2P_CLIENTSreeramya Soratkal1-1/+2
The wdev channel information is updated post channel switch only for the station mode and not for the other modes. Due to this, the P2P client still points to the old value though it moved to the new channel when the channel change is induced from the P2P GO. Update the bss channel after CSA channel switch completion for P2P client interface as well. Signed-off-by: Sreeramya Soratkal <quic_ssramya@quicinc.com> Link: https://lore.kernel.org/r/1646114600-31479-1-git-send-email-quic_ssramya@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-01cfg80211: fix CONFIG_CFG80211_EXTRA_REGDB_KEYDIR typoJohannes Berg1-1/+1
The kbuild change here accidentally removed not only the unquoting, but also the last character of the variable name. Fix that. Fixes: 129ab0d2d9f3 ("kbuild: do not quote string values in include/config/auto.conf") Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20220221155512.1d25895f7c5f.I50fa3d4189fcab90a2896fe8cae215035dae9508@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-01nl80211: Handle nla_memdup failures in handle_nan_filterJiasheng Jiang1-0/+12
As there's potential for failure of the nla_memdup(), check the return value. Fixes: a442b761b24b ("cfg80211: add add_nan_func / del_nan_func") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220301100020.3801187-1-jiasheng@iscas.ac.cn Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-13/+4
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-16cfg80211: Support configuration of station EHT capabilitiesIlan Peer1-4/+33
Add attributes and some code bits to support userspace passing in EHT capabilities of stations. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://lore.kernel.org/r/20220214173004.ecf0b3ff9627.Icb4a5f2ec7b41d9008ac4cfc16c59baeb84793d3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16cfg80211: add NO-EHT flag to regulatoryIlan Peer1-0/+3
This may be necessary in some cases, add a flag and propagate it, just like the NO-HE that already exists. Signed-off-by: Ilan Peer <ilan.peer@intel.com> [split off from a combined 320/no-EHT patch] Link: https://lore.kernel.org/r/20220214173004.dbb85a7b86bb.Ifc1e2daac51c1cc5f895ccfb79faf5eaec3950ec@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16nl80211: add support for 320MHz channel limitationSriram R2-0/+9
Add support to advertise drivers or regulatory limitations on 320 MHz channels to userspace. Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-authored-by: Karthikeyan Periyasamy <quic_periyasia@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasia@quicinc.com> Co-authored-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/1640163883-12696-6-git-send-email-quic_vjakkam@quicinc.com Link: https://lore.kernel.org/r/20220214163009.175289-3-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16nl80211: add EHT MCS supportVeerendranath Jakkam2-0/+150
Add support for reporting and calculating EHT bitrates. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/1640163883-12696-7-git-send-email-quic_vjakkam@quicinc.com Link: https://lore.kernel.org/r/20220214163009.175289-2-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16cfg80211: Add support for EHT 320 MHz channel widthJia Ding2-7/+86
Add 320 MHz support in the channel def and center frequency validation with compatible check. Signed-off-by: Jia Ding <quic_jiad@quicinc.com> Co-authored-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-authored-by: Muna Sinada <quic_msinada@quicinc.com> Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Co-authored-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/1640163883-12696-5-git-send-email-quic_vjakkam@quicinc.com Link: https://lore.kernel.org/r/20220214163009.175289-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16cfg80211: Add data structures to capture EHT capabilitiesIlan Peer1-0/+27
And advertise EHT capabilities to user space when supported. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://lore.kernel.org/r/20220214173004.6fb70658529f.I2413a37c8f7d2d6d638038a3d95360a3fce0114d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16nl80211: accept only HE capability elements with valid sizeJohannes Berg1-3/+11
The kernel (driver code) should be able to assume that a station's HE capabilities are not badly sized, so reject them if they are. Link: https://lore.kernel.org/r/20220214172921.80b710d45cb7.Id57ce32f9538a40e36c620fabedbd2c73346ef56@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16nl80211: use RCU to read regdom in reg get/dumpJohannes Berg1-15/+17
Use RCU here to read the regdomain, this will allow us to remove the RTNL locking from the setter. Note in nl80211_get_reg_do() we still need the RTNL to do the wiphy lookup. Link: https://lore.kernel.org/r/20220214101820.5d4acbcf2a46.Ibfc91980439862125e983d9adeebaba73fe38e2d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04cfg80211: fix race in netlink owner interface destructionJohannes Berg1-13/+4
My previous fix here to fix the deadlock left a race where the exact same deadlock (see the original commit referenced below) can still happen if cfg80211_destroy_ifaces() already runs while nl80211_netlink_notify() is still marking some interfaces as nl_owner_dead. The race happens because we have two loops here - first we dev_close() all the netdevs, and then we destroy them. If we also have two netdevs (first one need only be a wdev though) then we can find one during the first iteration, close it, and go to the second iteration -- but then find two, and try to destroy also the one we didn't close yet. Fix this by only iterating once. Reported-by: Toke Høiland-Jørgensen <toke@redhat.com> Fixes: ea6b2098dd02 ("cfg80211: fix locking in netlink owner interface destruction") Tested-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20220201130951.22093-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04cfg80211: pmsr: remove useless ifdef guardsJohannes Berg1-4/+0
This isn't a header file, I guess I must've copied from the header file and forgotten to remove the guards. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.330d03623b08.Idda91cd6f1c7bd865a50c47d408e5cdab0fd951f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04cfg80211: don't add non transmitted BSS to 6GHz scanned channelsAvraham Stern1-1/+8
When adding 6GHz channels to scan request based on reported co-located APs, don't add channels that have only APs with "non-transmitted" BSSes if they only match the wildcard SSID since they will be found by probing the "transmitted" BSS. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.f6ddf099f934.I231e55885d3644f292d00dfe0f42653269f2559e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04cfg80211/mac80211: assume CHECKSUM_COMPLETE includes SNAPJohannes Berg1-3/+5
There's currently only one driver that reports CHECKSUM_COMPLETE, that is iwlwifi. The current hardware there calculates checksum after the SNAP header, but only RFC 1042 (and some other cases, but replicating the exact hardware logic for corner cases in the driver seemed awkward.) Newer generations of hardware will checksum _including_ the SNAP, which makes things easier. To handle that, simply always assume the checksum _includes_ the SNAP header, which this patch does, requiring to first add it for older iwlwifi hardware, and then remove it again later on conversion. Alternatively, we could have: 1) Always assumed the checksum starts _after_ the SNAP header; the problem with this is that we'd have to replace the exact "what is the SNAP" check in iwlwifi that cfg80211 has. 2) Made it configurable with some flag, but that seemed like too much complexity. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.230736e19e0e.I3e6745873585ad943c152fab9e23b5221f17a95f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-01-19Merge tag 'kbuild-v5.17' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add new kconfig target 'make mod2noconfig', which will be useful to speed up the build and test iteration. - Raise the minimum supported version of LLVM to 11.0.0 - Refactor certs/Makefile - Change the format of include/config/auto.conf to stop double-quoting string type CONFIG options. - Fix ARCH=sh builds in dash - Separate compression macros for general purposes (cmd_bzip2 etc.) and the ones for decompressors (cmd_bzip2_with_size etc.) - Misc Makefile cleanups * tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) kbuild: add cmd_file_size arch: decompressor: remove useless vmlinux.bin.all-y kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22} kbuild: drop $(size_append) from cmd_zstd sh: rename suffix-y to suffix_y doc: kbuild: fix default in `imply` table microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV} certs: move scripts/extract-cert to certs/ kbuild: do not quote string values in include/config/auto.conf kbuild: do not include include/config/auto.conf from shell scripts certs: simplify $(srctree)/ handling and remove config_filename macro kbuild: stop using config_filename in scripts/Makefile.modsign certs: remove misleading comments about GCC PR certs: refactor file cleaning certs: remove unneeded -I$(srctree) option for system_certificates.o certs: unify duplicated cmd_extract_certs and improve the log certs: use $< and $@ to simplify the key generation rule kbuild: remove headers_check stub kbuild: move headers_check.pl to usr/include/ certs: use if_changed to re-generate the key when the key type is changed ...
2022-01-08kbuild: do not quote string values in include/config/auto.confMasahiro Yamada1-2/+2
The previous commit fixed up all shell scripts to not include include/config/auto.conf. Now that include/config/auto.conf is only included by Makefiles, we can change it into a more Make-friendly form. Previously, Kconfig output string values enclosed with double-quotes (both in the .config and include/config/auto.conf): CONFIG_X="foo bar" Unlike shell, Make handles double-quotes (and single-quotes as well) verbatim. We must rip them off when used. There are some patterns: [1] $(patsubst "%",%,$(CONFIG_X)) [2] $(CONFIG_X:"%"=%) [3] $(subst ",,$(CONFIG_X)) [4] $(shell echo $(CONFIG_X)) These are not only ugly, but also fragile. [1] and [2] do not work if the value contains spaces, like CONFIG_X=" foo bar " [3] does not work correctly if the value contains double-quotes like CONFIG_X="foo\"bar" [4] seems to work better, but has a cost of forking a process. Anyway, quoted strings were always PITA for our Makefiles. This commit changes Kconfig to stop quoting in include/config/auto.conf. These are the string type symbols referenced in Makefiles or scripts: ACPI_CUSTOM_DSDT_FILE ARC_BUILTIN_DTB_NAME ARC_TUNE_MCPU BUILTIN_DTB_SOURCE CC_IMPLICIT_FALLTHROUGH CC_VERSION_TEXT CFG80211_EXTRA_REGDB_KEYDIR EXTRA_FIRMWARE EXTRA_FIRMWARE_DIR EXTRA_TARGETS H8300_BUILTIN_DTB INITRAMFS_SOURCE LOCALVERSION MODULE_SIG_HASH MODULE_SIG_KEY NDS32_BUILTIN_DTB NIOS2_DTB_SOURCE OPENRISC_BUILTIN_DTB SOC_CANAAN_K210_DTB_SOURCE SYSTEM_BLACKLIST_HASH_LIST SYSTEM_REVOCATION_KEYS SYSTEM_TRUSTED_KEYS TARGET_CPU UNUSED_KSYMS_WHITELIST XILINX_MICROBLAZE0_FAMILY XILINX_MICROBLAZE0_HW_VER XTENSA_VARIANT_NAME I checked them one by one, and fixed up the code where necessary. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-12-21Merge tag 'mac80211-next-for-net-next-2021-12-21' of ↵Jakub Kicinski11-126/+474
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time we have: * ndo_fill_forward_path support in mac80211, to let drivers use it * association comeback notification for userspace, to be able to react more sensibly to long delays * support for background radar detection hardware in some chipsets * SA Query Procedures offload on the AP side * more logging if we find problems with HT/VHT/HE * various cleanups and minor fixes Conflicts: net/wireless/reg.c: e08ebd6d7b90 ("cfg80211: Acquire wiphy mutex on regulatory work") 701fdfe348f7 ("cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface") https://lore.kernel.org/r/20211221111950.57ecc6a7@canb.auug.org.au drivers/net/wireless/ath/ath10k/wmi.c: 7f599aeccbd2 ("cfg80211: Use the HE operation IE to determine a 6GHz BSS channel") 3bf2537ec2e3 ("ath10k: drop beacon and probe response which leak from other channel") https://lore.kernel.org/r/20211221115004.1cd6b262@canb.auug.org.au * tag 'mac80211-next-for-net-next-2021-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (32 commits) cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface rfkill: allow to get the software rfkill state cfg80211: refactor cfg80211_get_ies_channel_number() nl82011: clarify interface combinations wrt. channels nl80211: Add support to offload SA Query procedures for AP SME device nl80211: Add support to set AP settings flags with single attribute mac80211: add more HT/VHT/HE state logging cfg80211: Use the HE operation IE to determine a 6GHz BSS channel cfg80211: rename offchannel_chain structs to background_chain to avoid confusion with ETSI standard mac80211: Notify cfg80211 about association comeback cfg80211: Add support for notifying association comeback mac80211: introduce channel switch disconnect function cfg80211: Fix order of enum nl80211_band_iftype_attr documentation cfg80211: simplify cfg80211_chandef_valid() mac80211: Remove a couple of obsolete TODO mac80211: fix FEC flag in radio tap header mac80211: use coarse boottime for airtime fairness code ieee80211: change HE nominal packet padding value defines cfg80211: use ieee80211_bss_get_elem() instead of _get_ie() mac80211: Use memset_after() to clear tx status ... ==================== Link: https://lore.kernel.org/r/20211221112532.28708-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-20cfg80211: Enable regulatory enforcement checks for drivers supporting mesh ifaceSriram R2-0/+3
Currently cfg80211 checks for invalid channels whenever there is a regulatory update and stops the active interfaces if it is operating on an unsupported channel in the new regulatory domain. This is done based on a regulatory flag REGULATORY_IGNORE_STALE_KICKOFF set during wiphy registration which disables this enforcement when unsupported interface modes are supported by driver. Add support to enable this enforcement when Mesh Point interface type is advertised by drivers. Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1638409120-28997-1-git-send-email-quic_srirrama@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20cfg80211: refactor cfg80211_get_ies_channel_number()Johannes Berg1-24/+22
Now that this is no longer part of the bigger function, we can get rid of the channel_num variable. Also change the function to use the struct element helpers, instead of open-coding the element handling. Link: https://lore.kernel.org/r/20211202130913.a0adf67a9319.I6db0340a34fff18d78e9cd512f4abf855da4e43a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20nl80211: Add support to set AP settings flags with single attributeVeerendranath Jakkam1-2/+6
In previous method each AP settings flag is represented by a top-level flag attribute and conversion to enum cfg80211_ap_settings_flags had to be done before sending them to driver. This commit is to make it easier to define new AP settings flags and sending them to driver. This commit also deprecate sending of %NL80211_ATTR_EXTERNAL_AUTH_SUPPORT in %NL80211_CMD_START_AP. But to maintain backwards compatibility checks for %NL80211_ATTR_EXTERNAL_AUTH_SUPPORT in %NL80211_CMD_START_AP when %NL80211_ATTR_AP_SETTINGS_FLAGS not present in %NL80211_CMD_START_AP. Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org> Link: https://lore.kernel.org/r/1637911519-21306-1-git-send-email-vjakkam@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20cfg80211: Use the HE operation IE to determine a 6GHz BSS channelAyala Beker1-7/+49
A non-collocated AP whose primary channel is not a PSC channel may transmit a duplicated beacon on the corresponding PSC channel in which it would indicate its true primary channel. Use this inforamtion contained in the HE operation IE to determine the primary channel of the AP. In case of invalid infomration ignore it and use the channel the frame was received on. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211202143322.71eb2176e54e.I130f678e4aa390973ab39d838bbfe7b2d54bff8e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20cfg80211: rename offchannel_chain structs to background_chain to avoid ↵Lorenzo Bianconi7-73/+75
confusion with ETSI standard ETSI standard defines "Offchannel CAC" as: "Off-Channel CAC is performed by a number of non-continuous checks spread over a period in time. This period, which is required to determine the presence of radar signals, is defined as the Off-Channel CAC Time.. Minimum Off-Channel CAC Time 6 minutes and Maximum Off-Channel CAC Time 4 hours..". mac80211 implementation refers to a dedicated hw chain used for continuous radar monitoring. Rename offchannel_* references to background_* in order to avoid confusion with ETSI standard. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/4204cc1d648d76b44557981713231e030a3bd991.1638190762.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20cfg80211: Add support for notifying association comebackIlan Peer2-0/+55
Thought the underline driver MLME can handle association temporal rejection with comeback, it is still useful to notify this to user space, as user space might want to handle the temporal rejection differently. For example, in case the comeback time is too long, user space can deauthenticate immediately and try to associate with a different AP. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.2467809e8cb3.I45574185b582666bc78eef0c29a4c36b478e5382@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20cfg80211: simplify cfg80211_chandef_valid()Johannes Berg1-30/+32
There are a lot of duplicate checks in this function to check the delta between the control channel and CF1. With the addition of 320 MHz, this will become even more. Simplify the code so that the common checks are done only once for multiple bandwidths. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.2d0240b07f11.I759e8e990f5386ba2b56ffb2488a8d4e16e22c1b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-14cfg80211: Acquire wiphy mutex on regulatory workIlan Peer1-1/+6
The function cfg80211_reg_can_beacon_relax() expects wiphy mutex to be held when it is being called. However, when reg_leave_invalid_chans() is called the mutex is not held. Fix it by acquiring the lock before calling the function. Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211202152831.527686cda037.I40ad9372a47cbad53b4aae7b5a6ccc0dc3fddf8b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-14nl80211: remove reload flag from regulatory_requestFinn Behrens1-4/+2
This removes the previously unused reload flag, which was introduced in 1eda919126b4. The request is handled as NL80211_REGDOM_SET_BY_CORE, which is parsed unconditionally. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Nathan Chancellor <nathan@kernel.org> Fixes: 1eda919126b4 ("nl80211: reset regdom when reloading regdb") Link: https://lore.kernel.org/all/YaZuKYM5bfWe2Urn@archlinux-ax161/ Signed-off-by: Finn Behrens <me@kloenk.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/YadvTolO8rQcNCd/@gimli.kloenk.dev Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-29nl80211: reset regdom when reloading regdbFinn Behrens1-2/+25
Reload the regdom when the regulatory db is reloaded. Otherwise, the user had to change the regulatoy domain to a different one and then reset it to the correct one to have a new regulatory db take effect after a reload. Signed-off-by: Finn Behrens <fin@nyantec.com> Link: https://lore.kernel.org/r/YaIIZfxHgqc/UTA7@gimli.kloenk.dev [edit commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-28cfg80211: use ieee80211_bss_get_elem() instead of _get_ie()Johannes Berg4-34/+33
Use the structured helper for finding an element instead of the unstructured ieee80211_bss_get_ie(). Link: https://lore.kernel.org/r/20210930131130.e94709f341c3.I4ddb7fcb40efca27987deda7f9a144a5702ebfae@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-26cfg80211: allow continuous radar monitoring on offchannel chainLorenzo Bianconi3-27/+71
Allow continuous radar detection on the offchannel chain in order to switch to the monitored channel whenever the underlying driver reports a radar pattern on the main channel. Tested-by: Owen Peng <owen.peng@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/d46217310a49b14ff0e9c002f0a6e0547d70fd2c.1637071350.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-26cfg80211: schedule offchan_cac_abort_wk in cfg80211_radar_eventLorenzo Bianconi2-10/+17
If necessary schedule offchan_cac_abort_wk work in cfg80211_radar_event routine adding offchan parameter to cfg80211_radar_event signature. Rename cfg80211_radar_event in __cfg80211_radar_event and introduce the two following inline helpers: - cfg80211_radar_event - cfg80211_offchan_radar_event Doing so the drv will not need to run cfg80211_offchan_cac_abort() after radar detection on the offchannel chain. Tested-by: Owen Peng <owen.peng@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/3ff583e021e3343a3ced54a7b09b5e184d1880dc.1637062727.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-26cfg80211: delete redundant free codeliuguoqiang1-9/+5
When kzalloc failed and rdev->sacn_req or rdev->scan_msg is null, pass a null pointer to kfree is redundant, delete it and return directly. Signed-off-by: liuguoqiang <liuguoqiang@uniontech.com> Link: https://lore.kernel.org/r/20211115092139.24407-1-liuguoqiang@uniontech.com [remove now unused creq = NULL assigment] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-26cfg80211: fix possible NULL pointer dereference in ↵Lorenzo Bianconi1-1/+4
cfg80211_stop_offchan_radar_detection Fix the following NULL pointer dereference in cfg80211_stop_offchan_radar_detection routine that occurs when hostapd is stopped during the CAC on offchannel chain: Sat Jan 1 0[ 779.567851] ESR = 0x96000005 0:12:50 2000 dae[ 779.572346] EC = 0x25: DABT (current EL), IL = 32 bits mon.debug hostap[ 779.578984] SET = 0, FnV = 0 d: hostapd_inter[ 779.583445] EA = 0, S1PTW = 0 face_deinit_free[ 779.587936] Data abort info: : num_bss=1 conf[ 779.592224] ISV = 0, ISS = 0x00000005 ->num_bss=1 Sat[ 779.597403] CM = 0, WnR = 0 Jan 1 00:12:50[ 779.601749] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000418b2000 2000 daemon.deb[ 779.609601] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 ug hostapd: host[ 779.619657] Internal error: Oops: 96000005 [#1] SMP [ 779.770810] CPU: 0 PID: 2202 Comm: hostapd Not tainted 5.10.75 #0 [ 779.776892] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 779.782370] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--) [ 779.788384] pc : cfg80211_chandef_valid+0x10/0x490 [cfg80211] [ 779.794128] lr : cfg80211_check_station_change+0x3190/0x3950 [cfg80211] [ 779.800731] sp : ffffffc01204b7e0 [ 779.804036] x29: ffffffc01204b7e0 x28: ffffff80039bdc00 [ 779.809340] x27: 0000000000000000 x26: ffffffc008cb3050 [ 779.814644] x25: 0000000000000000 x24: 0000000000000002 [ 779.819948] x23: ffffff8002630000 x22: ffffff8003e748d0 [ 779.825252] x21: 0000000000000cc0 x20: ffffff8003da4a00 [ 779.830556] x19: 0000000000000000 x18: ffffff8001bf7ce0 [ 779.835860] x17: 00000000ffffffff x16: 0000000000000000 [ 779.841164] x15: 0000000040d59200 x14: 00000000000019c0 [ 779.846467] x13: 00000000000001c8 x12: 000636b9e9dab1c6 [ 779.851771] x11: 0000000000000141 x10: 0000000000000820 [ 779.857076] x9 : 0000000000000000 x8 : ffffff8003d7d038 [ 779.862380] x7 : 0000000000000000 x6 : ffffff8003d7d038 [ 779.867683] x5 : 0000000000000e90 x4 : 0000000000000038 [ 779.872987] x3 : 0000000000000002 x2 : 0000000000000004 [ 779.878291] x1 : 0000000000000000 x0 : 0000000000000000 [ 779.883594] Call trace: [ 779.886039] cfg80211_chandef_valid+0x10/0x490 [cfg80211] [ 779.891434] cfg80211_check_station_change+0x3190/0x3950 [cfg80211] [ 779.897697] nl80211_radar_notify+0x138/0x19c [cfg80211] [ 779.903005] cfg80211_stop_offchan_radar_detection+0x7c/0x8c [cfg80211] [ 779.909616] __cfg80211_leave+0x2c/0x190 [cfg80211] [ 779.914490] cfg80211_register_netdevice+0x1c0/0x6d0 [cfg80211] [ 779.920404] raw_notifier_call_chain+0x50/0x70 [ 779.924841] call_netdevice_notifiers_info+0x54/0xa0 [ 779.929796] __dev_close_many+0x40/0x100 [ 779.933712] __dev_change_flags+0x98/0x190 [ 779.937800] dev_change_flags+0x20/0x60 [ 779.941628] devinet_ioctl+0x534/0x6d0 [ 779.945370] inet_ioctl+0x1bc/0x230 [ 779.948849] sock_do_ioctl+0x44/0x200 [ 779.952502] sock_ioctl+0x268/0x4c0 [ 779.955985] __arm64_sys_ioctl+0xac/0xd0 [ 779.959900] el0_svc_common.constprop.0+0x60/0x110 [ 779.964682] do_el0_svc+0x1c/0x24 [ 779.967990] el0_svc+0x10/0x1c [ 779.971036] el0_sync_handler+0x9c/0x120 [ 779.974950] el0_sync+0x148/0x180 [ 779.978259] Code: a9bc7bfd 910003fd a90153f3 aa0003f3 (f9400000) [ 779.984344] ---[ end trace 0e67b4f5d6cdeec7 ]--- [ 779.996400] Kernel panic - not syncing: Oops: Fatal exception [ 780.002139] SMP: stopping secondary CPUs [ 780.006057] Kernel Offset: disabled [ 780.009537] CPU features: 0x0000002,04002004 [ 780.013796] Memory Limit: none Fixes: b8f5facf286b ("cfg80211: implement APIs for dedicated radar detection HW") Reported-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/c2e34c065bf8839c5ffa45498ae154021a72a520.1635958796.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-19cfg80211: move offchan_cac_event to a dedicated workLorenzo Bianconi3-23/+46
In order to make cfg80211_offchan_cac_abort() (renamed from cfg80211_offchan_cac_event) callable in other contexts and without so much locking restrictions, make it trigger a new work instead of operating directly. Do some other renames while at it to clarify. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/6145c3d0f30400a568023f67981981d24c7c6133.1635325205.git.lorenzo@kernel.org [rewrite commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-19cfg80211: implement APIs for dedicated radar detection HWLorenzo Bianconi6-6/+176
If a dedicated (off-channel) radar detection hardware (chain) is available in the hardware/driver, allow this to be used by calling the NL80211_CMD_RADAR_DETECT command with a new flag attribute requesting off-channel radar detection is used. Offchannel CAC (channel availability check) avoids the CAC downtime when switching to a radar channel or when turning on the AP. Drivers advertise support for this using the new feature flag NL80211_EXT_FEATURE_RADAR_OFFCHAN. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/7468e291ef5d05d692c1738d25b8f778d8ea5c3f.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/1e60e60fef00e14401adae81c3d49f3e5f307537.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/85fa50f57fc3adb2934c8d9ca0be30394de6b7e8.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/4b6c08671ad59aae0ac46fc94c02f31b1610eb72.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/241849ccaf2c228873c6f8495bf87b19159ba458.1634979655.git.lorenzo@kernel.org [remove offchan_mutex, fix cfg80211_stop_offchan_radar_detection(), remove gfp_t argument, fix documentation, fix tracing] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-15nl80211: fix radio statistics in survey dumpJohannes Berg2-20/+20
Even if userspace specifies the NL80211_ATTR_SURVEY_RADIO_STATS attribute, we cannot get the statistics because we're not really parsing the incoming attributes properly any more. Fix this by passing the attrbuf to nl80211_prepare_wdev_dump() and filling it there, if given, and using a local version only if no output is desired. Since I'm touching it anyway, make nl80211_prepare_wdev_dump() static. Fixes: 50508d941c18 ("cfg80211: use parallel_ops for genl") Reported-by: Jan Fuchs <jf@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Sven Eckelmann <sven@narfation.org> Link: https://lore.kernel.org/r/20211029092539.2851b4799386.If9736d4575ee79420cbec1bd930181e1d53c7317@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-15cfg80211: call cfg80211_stop_ap when switch from P2P_GO typeNguyen Dinh Phi1-0/+1
If the userspace tools switch from NL80211_IFTYPE_P2P_GO to NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), it does not call the cleanup cfg80211_stop_ap(), this leads to the initialization of in-use data. For example, this path re-init the sdata->assigned_chanctx_list while it is still an element of assigned_vifs list, and makes that linked list corrupt. Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com> Reported-by: syzbot+bbf402b783eeb6d908db@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20211027173722.777287-1-phind.uet@gmail.com Cc: stable@vger.kernel.org Fixes: ac800140c20e ("cfg80211: .stop_ap when interface is going down") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski5-22/+29
include/net/sock.h 7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable") 4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout") drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.") Adjacent code addition in both cases, keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25cfg80211: correct bridge/4addr mode checkJanusz Dziedzic1-7/+7
Without the patch we fail: $ sudo brctl addbr br0 $ sudo brctl addif br0 wlp1s0 $ sudo iw wlp1s0 set 4addr on command failed: Device or resource busy (-16) Last command failed but iface was already in 4addr mode. Fixes: ad4bb6f8883a ("cfg80211: disallow bridging managed/adhoc interfaces") Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com> Link: https://lore.kernel.org/r/20211024201546.614379-1-janusz.dziedzic@gmail.com [add fixes tag, fix indentation, edit commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-25cfg80211: fix management registrations lockingJohannes Berg3-13/+17
The management registrations locking was broken, the list was locked for each wdev, but cfg80211_mgmt_registrations_update() iterated it without holding all the correct spinlocks, causing list corruption. Rather than trying to fix it with fine-grained locking, just move the lock to the wiphy/rdev (still need the list on each wdev), we already need to hold the wdev lock to change it, so there's no contention on the lock in any case. This trivially fixes the bug since we hold one wdev's lock already, and now will hold the lock that protects all lists. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen <j@w1.fi> Fixes: 6cd536fe62ef ("cfg80211: change internal management frame registration API") Link: https://lore.kernel.org/r/20211025133111.5cf733eab0f4.I7b0abb0494ab712f74e2efcd24bb31ac33f7eee9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21nl80211: Add LC placeholder band definition to nl80211_bandSrinivasan Raju2-0/+3
Define LC band which is a draft under IEEE 802.11bb. Current NL80211_BAND_LC is a placeholder band and will be more defined IEEE 802.11bb progresses. Signed-off-by: Srinivasan Raju <srini.raju@purelifi.com> Link: https://lore.kernel.org/r/20211018100143.7565-2-srini.raju@purelifi.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21cfg80211: separate get channel number from iesWen Gong1-15/+26
Get channel number from ies is a common logic, so separate it to a new function, which could also be used by lower driver. Signed-off-by: Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/20210930081533.4898-1-wgong@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21cfg80211: scan: use element finding functions in easy casesJohannes Berg1-9/+9
There are a few easy cases where we only check for NULL or have just simple use of the result, this can be done with the element finding functions instead. Link: https://lore.kernel.org/r/20210930131130.f27c8a7ec264.Iadb03c4307e9216e080ce513e8ad4048cd020b25@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21nl80211: use element finding functionsJohannes Berg1-22/+22
The element finding functions are safer, so use them instead of the "find_ie" functions. Link: https://lore.kernel.org/r/20210930131130.b838f139cc8e.I2b641262d3fc6e0d498719bf343fdc1c0833b845@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-01cfg80211: scan: fix RCU in cfg80211_add_nontrans_list()Johannes Berg1-2/+5
The SSID pointer is pointing to RCU protected data, so we need to have it under rcu_read_lock() for the entire use. Fix this. Cc: stable@vger.kernel.org Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Link: https://lore.kernel.org/r/20210930131120.6ddfc603aa1d.I2137344c4e2426525b1a8e4ce5fca82f8ecbfe7e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-27nl80211: MBSSID and EMA support in AP modeJohn Crispin1-4/+174
Add new attributes to configure support for multiple BSSID and advanced multi-BSSID advertisements (EMA) in AP mode. - NL80211_ATTR_MBSSID_CONFIG used for per interface configuration. - NL80211_ATTR_MBSSID_ELEMS used to MBSSID elements for beacons. Memory for the elements is allocated dynamically. This change frees the memory in existing functions which call nl80211_parse_beacon(), a comment is added to indicate the new references to do the same. Signed-off-by: John Crispin <john@phrozen.org> Co-developed-by: Aloka Dixit <alokad@codeaurora.org> Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Link: https://lore.kernel.org/r/20210916025437.29138-2-alokad@codeaurora.org [don't leave ERR_PTR hanging around] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 19:49:44 +0300