summaryrefslogtreecommitdiff
path: root/net/wireless/util.c
AgeCommit message (Collapse)AuthorFilesLines
2014-05-21cfg80211: implement cfg80211_get_station cfg80211 APIAntonio Quartulli1-0/+18
Implement and export the new cfg80211_get_station() API. This utility can be used by other kernel modules to obtain detailed information about a given wireless station. It will be in particular useful to batman-adv which will implement a wireless rate based metric. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-19cfg80211: constify more pointers in the cfg80211 APIJohannes Berg1-1/+2
This also propagates through the drivers. The orinoco driver uses the cfg80211 API structs for internal bookkeeping, and so needs a (void *) cast that removes the const - but that's OK because it allocates those pointers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-13cfg80211: allow restricting supported dfs regionsFelix Fietkau1-0/+14
At the moment, the ath9k/ath10k DFS module only supports detecting ETSI radar patterns. Add a bitmap in the interface combinations, indicating which DFS regions are supported by the detector. If unset, support for all regions is assumed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-06cfg80211: export interface stopping functionMichal Kazior1-0/+3
This exports a new cfg80211_stop_iface() function. This is intended for driver internal interface combination management and channel switching. Due to locking issues (it re-enters driver) the call is asynchronous and uses cfg80211 event list/worker. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25cfg80211: change wiphy_to_dev function nameZhao, Gang1-1/+1
Name wiphy_to_rdev is more accurate to describe what the function does, i.e., return a pointer pointing to struct cfg80211_registered_device. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25cfg80211: allow drivers to iterate over matching combinationsMichal Kazior1-7/+37
The patch splits cfg80211_check_combinations() into an iterator function and a simple iteration user. This makes it possible for drivers to asses how many channels can use given iftype setup. This in turn can be used for future multi-interface/multi-channel channel switching. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211: fix radar_detect combination checkingMichal Kazior1-1/+1
All bits from radar_detect must match combination radar bitmask. Otherwise it is theoretically possible to lead into an invalid combination provided a driver reports strange combinations. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211/mac80211: move more combination checks to mac80211Luciano Coelho1-5/+0
Get rid of the cfg80211_can_add_interface() and cfg80211_can_change_interface() functions by moving that functionality to mac80211. With this patch all interface combination checks are now out of cfg80211 (except for the channel switch case which will be addressed in a future commit). Additionally, modify the ieee80211_check_combinations() function so that an undefined chandef can be passed, in order to use it before a channel is defined. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211/mac80211: move interface counting for combination check to mac80211Luciano Coelho1-0/+5
Move the counting part of the interface combination check from cfg80211 to mac80211. This is needed to simplify locking when the driver has to perform a combination check by itself (eg. with channel-switch). Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211: refactor cfg80211_can_use_iftype_chan()Luciano Coelho1-56/+73
Separate the code that counts the interface types and channels from the code that check the interface combinations. The new function that checks for combinations is exported so it can be called by the drivers. This is done in preparation for moving the interface combinations checks out of cfg80211. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-21Merge branch 'master' of ↵John W. Linville1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-03-20cfg80211: remove macro ASSERT_RDEV_LOCK(rdev)Zhao, Gang1-2/+1
Macro ASSERT_RDEV_LOCK(rdev) is equal to ASSERT_RTNL(), so replace it with ASSERT_RTNL() and remove it. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-13Merge branch 'master' of ↵John W. Linville1-30/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/ath/ath9k/recv.c
2014-03-04cfg80211: add MPLS and 802.21 classificationSimon Wunderlich1-0/+16
MPLS labels may contain traffic control information, which should be evaluated and used by the wireless subsystem if present. Also check for IEEE 802.21 which is always network control traffic. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25cfg80211: send stop AP event only due to internal reasonIlan Peer1-1/+1
Commit "nl80211: send event when AP operation is stopped" added an event to notify user space that an AP interface has been stopped, to handle cases such as suspend etc. The event is sent regardless if the stop AP flow was triggered by user space or due to internal state change. This might cause issues with wpa_supplicant/hostapd flows that consider stop AP flow as a synchronous one, e.g., AP/GO channel change in the absence of CSA support. In such cases, the flow will restart the AP immediately after the stop AP flow is done, and only handle the stop AP event after the current flow is done, and as a result stop the AP again. Change the current implementation to only send the event in case the stop AP was triggered due to an internal reason. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-21cfg80211: remove radar requirements check from cfg80211_can_use_iftype_chan()Luciano Coelho1-30/+1
We don't have to double check whether the parameters passed to cfg80211_can_use_iftype_chan() are correct. We should just make sure they *are* when we call this function. Remove the radar_detect argument check in cfg80211_can_use_iftype_chan() to simplify the code. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> [keep braces around a long comment + single statement] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-05cfg80211: consider existing DFS interfacesMichal Kazior1-1/+1
It was possible to break interface combinations in the following way: combo 1: iftype = AP, num_ifaces = 2, num_chans = 2, combo 2: iftype = AP, num_ifaces = 1, num_chans = 1, radar = HT20 With the above interface combinations it was possible to: step 1. start AP on DFS channel by matching combo 2 step 2. start AP on non-DFS channel by matching combo 1 This was possible beacuse (step 2) did not consider if other interfaces require radar detection. The patch changes how cfg80211 tracks channels - instead of channel itself now a complete chandef is stored. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-05cfg80211: fix channel configuration in IBSS joinAntonio Quartulli1-1/+2
When receiving an IBSS_JOINED event select the BSS object based on the {bssid, channel} couple rather than the bssid only. With the current approach if another cell having the same BSSID (but using a different channel) exists then cfg80211 picks up the wrong BSS object. The result is a mismatching channel configuration between cfg80211 and the driver, that can lead to any sort of problem. The issue can be triggered by having an IBSS sitting on given channel and then asking the driver to create a new cell using the same BSSID but with a different frequency. By passing the channel to cfg80211_get_bss() we can solve this ambiguity and retrieve/create the correct BSS object. All the users of cfg80211_ibss_joined() have been changed accordingly. Moreover WARN when cfg80211_ibss_joined() gets a NULL channel as argument and remove a bogus call of the same function in ath6kl (it does not make sense to call cfg80211_ibss_joined() with a zero BSSID on ibss-leave). Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: Bing Zhao <bzhao@marvell.com> Cc: Jussi Kivilinna <jussi.kivilinna@iki.fi> Cc: libertas-dev@lists.infradead.org Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> [minor code cleanup in ath6kl] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-09cfg80211: Add a function to get the number of supported channelsIlan Peer1-0/+13
Add a utility function to get the number of channels supported by the device, and update the places in the code that need this data. Signed-off-by: Ilan Peer <ilan.peer@intel.com> [replace another occurrence in libertas, fix kernel-doc, fix bugs] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-31cfg80211/mac80211: correct qos-map lockingJohannes Berg1-0/+2
Since the RTNL can't always be held, use wdev/sdata locking for the qos-map dereference in mac80211. This requires cfg80211 to consistently lock it, which it was missing in one place. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-19cfg80211: Add support for QoS mappingKyeyoon Park1-1/+18
This allows QoS mapping from external networks to be implemented as defined in IEEE Std 802.11-2012, 10.24.9. APs can use this to advertise DSCP ranges and exceptions for mapping frames to a specific UP over Wi-Fi. The payload of the QoS Map Set element (IEEE Std 802.11-2012, 8.4.2.97) is sent to the driver through the new NL80211_ATTR_QOS_MAP attribute to configure the local behavior either on the AP (based on local configuration) or on a station (based on information received from the AP). Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28nl80211/cfg80211: enable DFS for IBSS modeSimon Wunderlich1-4/+10
To use DFS in IBSS mode, userspace is required to react to radar events. It can inform nl80211 that it is capable of doing so by adding a NL80211_ATTR_HANDLE_DFS attribute when joining the IBSS. This attribute is supplied to let the kernelspace know that the userspace application can and will handle radar events, e.g. by intiating channel switches to a valid channel. DFS channels may only be used if this attribute is supplied and the driver supports it. Driver support will be checked even if a channel without DFS will be initially joined, as a DFS channel may be chosen later. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> [fix attribute name in commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-02cfg80211: vlan priority handling in WMMcedric Voncken1-0/+9
If the VLAN tci is set in skb->vlan_tci use the priority field to determine the WMM priority. Signed-off-by: cedric Voncken <cedric.voncken@acksys.fr> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16cfg80211/mac80211: get mandatory rates based on scan widthSimon Wunderlich1-4/+10
Mandatory rates for 5 and 10 MHz are different from the rates used for 20 MHz in 2.4 GHz mode, as they use OFDM only. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-05-25cfg80211: remove some locked wrappers from sme APIJohannes Berg1-0/+2
By making all the API functions require wdev locking we can clean up the API a bit, getting rid of the locking version of each function. This also decreases the size of cfg80211 by a small amount. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-25cfg80211: vastly simplify lockingJohannes Berg1-11/+0
Virtually all code paths in cfg80211 already (need to) hold the RTNL. As such, there's little point in having another four mutexes for various parts of the code, they just cause lock ordering issues (and much of the time, the RTNL and a few of the others need thus be held.) Simplify all this by getting rid of the extra four mutexes and just use the RTNL throughout. Only a few code changes were needed to do this and we can get rid of a work struct for bonus points. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-25{cfg,mac}80211: move mandatory rates calculation to cfg80211Ashok Nagarajan1-0/+23
Move mandatory rates calculation to cfg80211, shared with non mac80211 drivers. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> [extend documentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-17cfg80211: add 60GHz regulatory classVladimir Kondratiev1-0/+3
Add regulatory class for 60GHz band, according to the last specification. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-24Merge branch 'master' of ↵John W. Linville1-4/+24
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-04-22cfg80211: invert P2P-Device vs. netdev check orderingJohannes Berg1-4/+4
In cfg80211_can_use_iftype_chan(), check for P2P Device first, and then for netdevs. This doesn't really change anything but makes the code a bit easier to read since it may not be obvious for everyone at first that a P2P device has no netdev. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16cfg80211: add ieee80211_operating_class_to_bandJohannes Berg1-0/+20
This function converts a (global only!) operating class to an internal band identifier. This will be needed for extended channel switch support. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-28net: add ETH_P_802_3_MINSimon Horman1-1/+1
Add a new constant ETH_P_802_3_MIN, the minimum ethernet type for an 802.3 frame. Frames with a lower value in the ethernet type field are Ethernet II. Also update all the users of this value that David Miller and I could find to use the new constant. Also correct a bug in util.c. The comparison with ETH_P_802_3_MIN should be >= not >. As suggested by Jesse Gross. Compile tested only. Cc: David Miller <davem@davemloft.net> Cc: Jesse Gross <jesse@nicira.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: John W. Linville <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Bart De Schuymer <bart.de.schuymer@pandora.be> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: linux-bluetooth@vger.kernel.org Cc: netfilter-devel@vger.kernel.org Cc: bridge@lists.linux-foundation.org Cc: linux-wireless@vger.kernel.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-media@vger.kernel.org Cc: netdev@vger.kernel.org Cc: dev@openvswitch.org Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11cfg80211: fix radar check for P2P_DEVICEIlan Peer1-1/+1
Radar is not required for P2P_DEVICE interfaces. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-24cfg80211: fix channel check in cfg80211_can_use_iftype_chanSimon Wunderlich1-1/+2
In commit "cfg80211: check radar interface combinations" a regression was introduced which might lead to NULL dereference if the argument chan = NULL, which might happen in IBSS/wext case (and probably others). Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-17cfg80211: check radar interface combinationsSimon Wunderlich1-3/+38
To ease further DFS development regarding interface combinations, use the interface combinations structure to test for radar capabilities. Drivers can specify which channel widths they support, and in which modes. Right now only a single AP interface is allowed, but as the DFS code evolves other combinations can be enabled. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-30cfg80211: fix BSS struct IE access racesJohannes Berg1-3/+6
When a BSS struct is updated, the IEs are currently overwritten or freed. This can lead to races if some other CPU is accessing the BSS struct and using the IEs concurrently. Fix this by always allocating the IEs in a new struct that holds the data and length and protecting access to this new struct with RCU. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26nl80211/cfg80211: add VHT MCS supportJohannes Berg1-1/+73
Add support for reporting and calculating VHT MCSes. Note that I'm not completely sure that the bitrate calculations are correct, nor that they can't be simplified. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26cfg80211: change function signature of cfg80211_get_p2p_attr()Arend van Spriel1-2/+3
The function cfg80211_get_p2p_attr() can fail and returns a negative error code. However, the return type is unsigned int. The largest positive number is determined by desired_len variable in the function, which is u16. So changing the return type to int to allow easy error checking. Also change the type for the attribute to enum for improved type checking. Signed-off-by: Arend van Spriel <arend@broadcom.com> [fix indentation, don't use u8 attr variable] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-06wireless: add utility function to get P2P attributeJohannes Berg1-0/+99
Parsing the P2P attributes can be tricky as their contents can be split across multiple (vendor) IEs. Thus, it's not possible to parse them like IEs (by returning a pointer to the data.) Instead, provide a function that copies the attribute data into a caller-provided buffer and returns the size needed (useful in case the buffer was too small.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-30Merge branch 'master' of ↵John W. Linville1-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/mwifiex/cfg80211.c
2012-10-27mac80211: verify that skb data is presentJohannes Berg1-1/+2
A number of places in the mesh code don't check that the frame data is present and in the skb header when trying to access. Add those checks and the necessary pskb_may_pull() calls. This prevents accessing data that doesn't actually exist. To do this, export ieee80211_get_mesh_hdrlen() to be able to use it in mac80211. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-27wireless: drop invalid mesh address extension framesJohannes Berg1-5/+6
The mesh header can have address extension by a 4th or a 5th and 6th address, but never both. Drop such frames in 802.11 -> 802.3 conversion along with any frames that have the wrong extension. Cc: stable@vger.kernel.org Reviewed-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18cfg80211: add wrappers for registered_device_opsHila Gonen1-7/+7
This will allow adding central tracing like in mac80211. Signed-off-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-24Merge branch 'master' of ↵John W. Linville1-17/+19
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-08-20cfg80211: add P2P Device abstractionJohannes Berg1-2/+16
In order to support using a different MAC address for the P2P Device address we must first have a P2P Device abstraction that can be assigned a MAC address. This abstraction will also be useful to support offloading P2P operations to the device, e.g. periodic listen for discoverability. Currently, the driver is responsible for assigning a MAC address to the P2P Device, but this could be changed by allowing a MAC address to be given to the NEW_INTERFACE command. As it has no associated netdev, a P2P Device can only be identified by its wdev identifier but the previous patches allowed using the wdev identifier in various APIs, e.g. remain-on-channel. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-06cfg80211: process pending events when unregistering net deviceDaniel Drake1-1/+1
libertas currently calls cfg80211_disconnected() when it is being brought down. This causes an event to be allocated, but since the wdev is already removed from the rdev by the time that the event processing work executes, the event is never processed or freed. http://article.gmane.org/gmane.linux.kernel.wireless.general/95666 Fix this leak, and other possible situations, by processing the event queue when a device is being unregistered. Thanks to Johannes Berg for the suggestion. Signed-off-by: Daniel Drake <dsd@laptop.org> Cc: stable@vger.kernel.org Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-31cfg80211: unify IE searchVladimir Kondratiev1-15/+3
Remove ah-hoc IE search code found in the ieee80211_bss_get_ie() and use cfg80211_find_ie() instead. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12cfg80211: fix locking and lockdep complaintsJohannes Berg1-1/+10
To call cfg80211_get_chan_state() we need to lock the wdev, so we need to lock the wdev_iter mutex in cfg80211_can_use_iftype_chan(). This needs to use nested locking for lockdep. Also, cfg80211_get_chan_state() doesn't actually use the rdev, so remove that completely including the lock assertion that isn't needed. Reported-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-09nl80211: prepare for non-netdev wireless devsJohannes Berg1-3/+3
In order to support a P2P device abstraction and Bluetooth high-speed AMPs, we need to have a way to identify virtual interfaces that don't have a netdev associated. Do this by adding a NL80211_ATTR_WDEV attribute to identify a wdev which may or may not also be a netdev. To simplify things, use a 64-bit value with the high 32 bits being the wiphy index for this new wdev identifier in the nl80211 API. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-05cfg80211: bitrate calculation for 60gVladimir Kondratiev1-0/+49
60g band uses different from .11n MCS scheme, so bitrate should be calculated differently Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-15 18:04:55 +0300