Age | Commit message (Collapse) | Author | Files | Lines |
|
After commit 59464b262ff5 ("SUNRPC: SOFTCONN tasks should time out when on
the sending list"), any 4.1 backchannel tasks placed on the sending queue
would immediately return with -ETIMEDOUT since their req timers are zero.
Initialize the backchannel's rpc_rqst timeout parameters from the xprt's
default timeout settings.
Fixes: 59464b262ff5 ("SUNRPC: SOFTCONN tasks should time out when on the sending list")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Fix the logic for picking current transport entry.
Fixes: 95d0d30c66b8 ("SUNRPC create an iterator to list only OFFLINE xprts")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
I received the following warning while running cthon against an ontap
server running pNFS:
[ 57.202521] =============================
[ 57.202522] WARNING: suspicious RCU usage
[ 57.202523] 6.7.0-rc3-g2cc14f52aeb7 #41492 Not tainted
[ 57.202525] -----------------------------
[ 57.202525] net/sunrpc/xprtmultipath.c:349 RCU-list traversed in non-reader section!!
[ 57.202527]
other info that might help us debug this:
[ 57.202528]
rcu_scheduler_active = 2, debug_locks = 1
[ 57.202529] no locks held by test5/3567.
[ 57.202530]
stack backtrace:
[ 57.202532] CPU: 0 PID: 3567 Comm: test5 Not tainted 6.7.0-rc3-g2cc14f52aeb7 #41492 5b09971b4965c0aceba19f3eea324a4a806e227e
[ 57.202534] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022
[ 57.202536] Call Trace:
[ 57.202537] <TASK>
[ 57.202540] dump_stack_lvl+0x77/0xb0
[ 57.202551] lockdep_rcu_suspicious+0x154/0x1a0
[ 57.202556] rpc_xprt_switch_has_addr+0x17c/0x190 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6]
[ 57.202596] rpc_clnt_setup_test_and_add_xprt+0x50/0x180 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6]
[ 57.202621] ? rpc_clnt_add_xprt+0x254/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6]
[ 57.202646] rpc_clnt_add_xprt+0x27a/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6]
[ 57.202671] ? __pfx_rpc_clnt_setup_test_and_add_xprt+0x10/0x10 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6]
[ 57.202696] nfs4_pnfs_ds_connect+0x345/0x760 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9]
[ 57.202728] ? __pfx_nfs4_test_session_trunk+0x10/0x10 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9]
[ 57.202754] nfs4_fl_prepare_ds+0x75/0xc0 [nfs_layout_nfsv41_files e3a4187f18ae8a27b630f9feae6831b584a9360a]
[ 57.202760] filelayout_write_pagelist+0x4a/0x200 [nfs_layout_nfsv41_files e3a4187f18ae8a27b630f9feae6831b584a9360a]
[ 57.202765] pnfs_generic_pg_writepages+0xbe/0x230 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9]
[ 57.202788] __nfs_pageio_add_request+0x3fd/0x520 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202813] nfs_pageio_add_request+0x18b/0x390 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202831] nfs_do_writepage+0x116/0x1e0 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202849] nfs_writepages_callback+0x13/0x30 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202866] write_cache_pages+0x265/0x450
[ 57.202870] ? __pfx_nfs_writepages_callback+0x10/0x10 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202891] nfs_writepages+0x141/0x230 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202913] do_writepages+0xd2/0x230
[ 57.202917] ? filemap_fdatawrite_wbc+0x5c/0x80
[ 57.202921] filemap_fdatawrite_wbc+0x67/0x80
[ 57.202924] filemap_write_and_wait_range+0xd9/0x170
[ 57.202930] nfs_wb_all+0x49/0x180 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202947] nfs4_file_flush+0x72/0xb0 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9]
[ 57.202969] __se_sys_close+0x46/0xd0
[ 57.202972] do_syscall_64+0x68/0x100
[ 57.202975] ? do_syscall_64+0x77/0x100
[ 57.202976] ? do_syscall_64+0x77/0x100
[ 57.202979] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 57.202982] RIP: 0033:0x7fe2b12e4a94
[ 57.202985] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d d5 18 0e 00 00 74 13 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 44 c3 0f 1f 00 48 83 ec 18 89 7c 24 0c e8 c3
[ 57.202987] RSP: 002b:00007ffe857ddb38 EFLAGS: 00000202 ORIG_RAX: 0000000000000003
[ 57.202989] RAX: ffffffffffffffda RBX: 00007ffe857dfd68 RCX: 00007fe2b12e4a94
[ 57.202991] RDX: 0000000000002000 RSI: 00007ffe857ddc40 RDI: 0000000000000003
[ 57.202992] RBP: 00007ffe857dfc50 R08: 7fffffffffffffff R09: 0000000065650f49
[ 57.202993] R10: 00007fe2b11f8300 R11: 0000000000000202 R12: 0000000000000000
[ 57.202994] R13: 00007ffe857dfd80 R14: 00007fe2b1445000 R15: 0000000000000000
[ 57.202999] </TASK>
The problem seems to be that two out of three callers aren't taking the
rcu_read_lock() before calling the list_for_each_entry_rcu() function in
rpc_xprt_switch_has_addr(). I fix this by having
rpc_xprt_switch_has_addr() unconditionaly take the rcu_read_lock(),
which is okay to do recursively in the case that the lock has already
been taken by a caller.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This function takes the necessary rcu read lock to dereference the
client's rpc_xprt_switch and bump the reference count so it doesn't
disappear underneath us before returning. This does mean that callers
are responsible for calling xprt_switch_put() on the returned object
when they are done with it.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
We don't use the rpc_xprt_switch anywhere in this function, so let's not
take an extra reference to in unnecessarily.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Address a few recently-introduced issues
* tag 'nfsd-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Revert 5f7fc5d69f6e92ec0b38774c387f5cf7812c5806
NFSD: Revert 738401a9bd1ac34ccd5723d69640a4adbb1a4bc0
NFSD: Revert 6c41d9a9bd0298002805758216a9c44e38a8500d
nfsd: hold nfsd_mutex across entire netlink operation
nfsd: call nfsd_last_thread() before final nfsd_put()
|
|
Guillaume says:
> I believe commit 5f7fc5d69f6e ("SUNRPC: Resupply rq_pages from
> node-local memory") in Linux 6.5+ is incorrect. It passes
> unconditionally rq_pool->sp_id as the NUMA node.
>
> While the comment in the svc_pool declaration in sunrpc/svc.h says
> that sp_id is also the NUMA node id, it might not be the case if
> the svc is created using svc_create_pooled(). svc_created_pooled()
> can use the per-cpu pool mode therefore in this case sp_id would
> be the cpu id.
Fix this by reverting now. At a later point this minor optimization,
and the deceptive labeling of the sp_id field, can be revisited.
Reported-by: Guillaume Morin <guillaume@morinfr.org>
Closes: https://lore.kernel.org/linux-nfs/ZYC9rsno8qYggVt9@bender.morinfr.org/T/#u
Fixes: 5f7fc5d69f6e ("SUNRPC: Resupply rq_pages from node-local memory")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This code is rarely (never?) enabled by distros, and it hasn't caught
anything in decades. Let's kill off this legacy debug code.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
strlcpy() reads the entire source buffer first. This read may exceed
the destination size limit. This is both inefficient and can lead
to linear read overflows if a source string is not NUL-terminated[1].
Additionally, it returns the size of the source string, not the
resulting size of the destination string. In an effort to remove strlcpy()
completely[2], replace strlcpy() here with strscpy().
Explicitly handle the truncation case by returning the size of the
resulting string.
If "nodename" was ever longer than sizeof(clnt->cl_nodename) - 1, this
change will fix a bug where clnt->cl_nodelen would end up thinking there
were more characters in clnt->cl_nodename than there actually were,
which might have lead to kernel memory content exposures.
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-nfs@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [1]
Link: https://github.com/KSPP/linux/issues/89 [2]
Co-developed-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20231114175407.work.410-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Pull NFS client updates from Trond Myklebust:
"Bugfixes:
- SUNRPC:
- re-probe the target RPC port after an ECONNRESET error
- handle allocation errors from rpcb_call_async()
- fix a use-after-free condition in rpc_pipefs
- fix up various checks for timeouts
- NFSv4.1:
- Handle NFS4ERR_DELAY errors during session trunking
- fix SP4_MACH_CRED protection for pnfs IO
- NFSv4:
- Ensure that we test all delegations when the server notifies
us that it may have revoked some of them
Features:
- Allow knfsd processes to break out of NFS4ERR_DELAY loops when
re-exporting NFSv4.x by setting appropriate values for the
'delay_retrans' module parameter
- nfs: Convert nfs_symlink() to use a folio"
* tag 'nfs-for-6.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: Convert nfs_symlink() to use a folio
SUNRPC: Fix RPC client cleaned up the freed pipefs dentries
NFSv4.1: fix SP4_MACH_CRED protection for pnfs IO
SUNRPC: Add an IS_ERR() check back to where it was
NFSv4.1: fix handling NFS4ERR_DELAY when testing for session trunking
nfs41: drop dependency between flexfiles layout driver and NFSv3 modules
NFSv4: fairly test all delegations on a SEQ4_ revocation
SUNRPC: SOFTCONN tasks should time out when on the sending list
SUNRPC: Force close the socket when a hard error is reported
SUNRPC: Don't skip timeout checks in call_connect_status()
SUNRPC: ECONNRESET might require a rebind
NFSv4/pnfs: Allow layoutget to return EAGAIN for softerr mounts
NFSv4: Add a parameter to limit the number of retries after NFS4ERR_DELAY
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add virtual-address based lskcipher interface
- Optimise ahash/shash performance in light of costly indirect calls
- Remove ahash alignmask attribute
Algorithms:
- Improve AES/XTS performance of 6-way unrolling for ppc
- Remove some uses of obsolete algorithms (md4, md5, sha1)
- Add FIPS 202 SHA-3 support in pkcs1pad
- Add fast path for single-page messages in adiantum
- Remove zlib-deflate
Drivers:
- Add support for S4 in meson RNG driver
- Add STM32MP13x support in stm32
- Add hwrng interface support in qcom-rng
- Add support for deflate algorithm in hisilicon/zip"
* tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits)
crypto: adiantum - flush destination page before unmapping
crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place
Documentation/module-signing.txt: bring up to date
module: enable automatic module signing with FIPS 202 SHA-3
crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures
crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support
crypto: FIPS 202 SHA-3 register in hash info for IMA
x509: Add OIDs for FIPS 202 SHA-3 hash and signatures
crypto: ahash - optimize performance when wrapping shash
crypto: ahash - check for shash type instead of not ahash type
crypto: hash - move "ahash wrapping shash" functions to ahash.c
crypto: talitos - stop using crypto_ahash::init
crypto: chelsio - stop using crypto_ahash::init
crypto: ahash - improve file comment
crypto: ahash - remove struct ahash_request_priv
crypto: ahash - remove crypto_ahash_alignmask
crypto: gcm - stop using alignmask of ahash
crypto: chacha20poly1305 - stop using alignmask of ahash
crypto: ccm - stop using alignmask of ahash
net: ipv6: stop checking crypto_ahash_alignmask
...
|
|
RPC client pipefs dentries cleanup is in separated rpc_remove_pipedir()
workqueue,which takes care about pipefs superblock locking.
In some special scenarios, when kernel frees the pipefs sb of the
current client and immediately alloctes a new pipefs sb,
rpc_remove_pipedir function would misjudge the existence of pipefs
sb which is not the one it used to hold. As a result,
the rpc_remove_pipedir would clean the released freed pipefs dentries.
To fix this issue, rpc_remove_pipedir should check whether the
current pipefs sb is consistent with the original pipefs sb.
This error can be catched by KASAN:
=========================================================
[ 250.497700] BUG: KASAN: slab-use-after-free in dget_parent+0x195/0x200
[ 250.498315] Read of size 4 at addr ffff88800a2ab804 by task kworker/0:18/106503
[ 250.500549] Workqueue: events rpc_free_client_work
[ 250.501001] Call Trace:
[ 250.502880] kasan_report+0xb6/0xf0
[ 250.503209] ? dget_parent+0x195/0x200
[ 250.503561] dget_parent+0x195/0x200
[ 250.503897] ? __pfx_rpc_clntdir_depopulate+0x10/0x10
[ 250.504384] rpc_rmdir_depopulate+0x1b/0x90
[ 250.504781] rpc_remove_client_dir+0xf5/0x150
[ 250.505195] rpc_free_client_work+0xe4/0x230
[ 250.505598] process_one_work+0x8ee/0x13b0
...
[ 22.039056] Allocated by task 244:
[ 22.039390] kasan_save_stack+0x22/0x50
[ 22.039758] kasan_set_track+0x25/0x30
[ 22.040109] __kasan_slab_alloc+0x59/0x70
[ 22.040487] kmem_cache_alloc_lru+0xf0/0x240
[ 22.040889] __d_alloc+0x31/0x8e0
[ 22.041207] d_alloc+0x44/0x1f0
[ 22.041514] __rpc_lookup_create_exclusive+0x11c/0x140
[ 22.041987] rpc_mkdir_populate.constprop.0+0x5f/0x110
[ 22.042459] rpc_create_client_dir+0x34/0x150
[ 22.042874] rpc_setup_pipedir_sb+0x102/0x1c0
[ 22.043284] rpc_client_register+0x136/0x4e0
[ 22.043689] rpc_new_client+0x911/0x1020
[ 22.044057] rpc_create_xprt+0xcb/0x370
[ 22.044417] rpc_create+0x36b/0x6c0
...
[ 22.049524] Freed by task 0:
[ 22.049803] kasan_save_stack+0x22/0x50
[ 22.050165] kasan_set_track+0x25/0x30
[ 22.050520] kasan_save_free_info+0x2b/0x50
[ 22.050921] __kasan_slab_free+0x10e/0x1a0
[ 22.051306] kmem_cache_free+0xa5/0x390
[ 22.051667] rcu_core+0x62c/0x1930
[ 22.051995] __do_softirq+0x165/0x52a
[ 22.052347]
[ 22.052503] Last potentially related work creation:
[ 22.052952] kasan_save_stack+0x22/0x50
[ 22.053313] __kasan_record_aux_stack+0x8e/0xa0
[ 22.053739] __call_rcu_common.constprop.0+0x6b/0x8b0
[ 22.054209] dentry_free+0xb2/0x140
[ 22.054540] __dentry_kill+0x3be/0x540
[ 22.054900] shrink_dentry_list+0x199/0x510
[ 22.055293] shrink_dcache_parent+0x190/0x240
[ 22.055703] do_one_tree+0x11/0x40
[ 22.056028] shrink_dcache_for_umount+0x61/0x140
[ 22.056461] generic_shutdown_super+0x70/0x590
[ 22.056879] kill_anon_super+0x3a/0x60
[ 22.057234] rpc_kill_sb+0x121/0x200
Fixes: 0157d021d23a ("SUNRPC: handle RPC client pipefs dentries by network namespace aware routines")
Signed-off-by: felix <fuzhen5@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
This IS_ERR() check was deleted during in a cleanup because, at the time,
the rpcb_call_async() function could not return an error pointer. That
changed in commit 25cf32ad5dba ("SUNRPC: Handle allocation failure in
rpc_new_task()") and now it can return an error pointer. Put the check
back.
A related revert was done in commit 13bd90141804 ("Revert "SUNRPC:
Remove unreachable error condition"").
Fixes: 037e910b52b0 ("SUNRPC: Remove unreachable error condition in rpcb_getport_async()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pull nfsd updates from Chuck Lever:
"This release completes the SunRPC thread scheduler work that was begun
in v6.6. The scheduler can now find an svc thread to wake in constant
time and without a list walk. Thanks again to Neil Brown for this
overhaul.
Lorenzo Bianconi contributed infrastructure for a netlink-based NFSD
control plane. The long-term plan is to provide the same functionality
as found in /proc/fs/nfsd, plus some interesting additions, and then
migrate the NFSD user space utilities to netlink.
A long series to overhaul NFSD's NFSv4 operation encoding was applied
in this release. The goals are to bring this family of encoding
functions in line with the matching NFSv4 decoding functions and with
the NFSv2 and NFSv3 XDR functions, preparing the way for better memory
safety and maintainability.
A further improvement to NFSD's write delegation support was
contributed by Dai Ngo. This adds a CB_GETATTR callback, enabling the
server to retrieve cached size and mtime data from clients holding
write delegations. If the server can retrieve this information, it
does not have to recall the delegation in some cases.
The usual panoply of bug fixes and minor improvements round out this
release. As always I am grateful to all contributors, reviewers, and
testers"
* tag 'nfsd-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (127 commits)
svcrdma: Fix tracepoint printk format
svcrdma: Drop connection after an RDMA Read error
NFSD: clean up alloc_init_deleg()
NFSD: Fix frame size warning in svc_export_parse()
NFSD: Rewrite synopsis of nfsd_percpu_counters_init()
nfsd: Clean up errors in nfs3proc.c
nfsd: Clean up errors in nfs4state.c
NFSD: Clean up errors in stats.c
NFSD: simplify error paths in nfsd_svc()
NFSD: Clean up nfsd4_encode_seek()
NFSD: Clean up nfsd4_encode_offset_status()
NFSD: Clean up nfsd4_encode_copy_notify()
NFSD: Clean up nfsd4_encode_copy()
NFSD: Clean up nfsd4_encode_test_stateid()
NFSD: Clean up nfsd4_encode_exchange_id()
NFSD: Clean up nfsd4_do_encode_secinfo()
NFSD: Clean up nfsd4_encode_access()
NFSD: Clean up nfsd4_encode_readdir()
NFSD: Clean up nfsd4_encode_entry4()
NFSD: Add an nfsd4_encode_nfs_cookie4() helper
...
|
|
SOFTCONN tasks need to periodically check if the transport is still
connected, so that they can time out if that is not the case.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Fix up xs_wake_error() to close the socket when a hard error is being
reported. Usually, that means an ECONNRESET was received on a connection
attempt.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
If connect() is returning ECONNRESET, it usually means that nothing is
listening on that port. If so, a rebind might be required in order to
obtain the new port on which the RPC service is listening.
Fixes: fd01b2597941 ("SUNRPC: ECONNREFUSED should cause a rebind.")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Convert to using the new inode timestamp accessor functions.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185347.80880-81-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When an RPC Call message cannot be pulled from the client, that
is a message loss, by definition. Close the connection to trigger
the client to resend.
Cc: <stable@vger.kernel.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There is no need to take down the whole system for these assertions.
I'd rather not attempt a heroic save here, as some bug has occurred
that has left the transport data structures in an unknown state.
Just warn and then leak the left-over resources.
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This removes the need to store and update back-links in the list.
It also remove the need for the _bh version of spin_lock().
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
sp_lock is now only used to protect sp_all_threads. This isn't needed
as sp_all_threads is only manipulated through svc_set_num_threads(),
which is already serialized. Read-acccess only requires rcu_read_lock().
So no more locking is needed.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Using an atomic_t avoids the need to take a spinlock (which can soon be
removed).
Choosing a thread to kill needs to be careful as we cannot set the "die
now" bit atomically with the test on the count. Instead we temporarily
increase the count.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
lwq avoids using back pointers in lists, and uses less locking.
This introduces a new spinlock, but the other one will be removed in a
future patch.
For svc_clean_up_xprts(), we now dequeue the entire queue, walk it to
remove and process the xprts that need cleaning up, then re-enqueue the
remaining queue.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently if several items of work become available in quick succession,
that number of threads (if available) will be woken. By the time some
of them wake up another thread that was already cache-warm might have
come along and completed the work. Anecdotal evidence suggests as many
as 15% of wakes find nothing to do once they get to the point of
looking.
This patch changes svc_pool_wake_idle_thread() to wake the first thread
on the queue but NOT remove it. Subsequent calls will wake the same
thread. Once that thread starts it will dequeue itself and after
dequeueing some work to do, it will wake the next thread if there is more
work ready. This results in a more orderly increase in the number of
busy threads.
As a bonus, this allows us to reduce locking around the idle queue.
svc_pool_wake_idle_thread() no longer needs to take a lock (beyond
rcu_read_lock()) as it doesn't manipulate the queue, it just looks at
the first item.
The thread itself can avoid locking by using the new
llist_del_first_this() interface. This will safely remove the thread
itself if it is the head. If it isn't the head, it will do nothing.
If multiple threads call this concurrently only one will succeed. The
others will do nothing, so no corruption can result.
If a thread wakes up and finds that it cannot dequeue itself that means
either
- that it wasn't woken because it was the head of the queue. Maybe the
freezer woke it. In that case it can go back to sleep (after trying
to freeze of course).
- some other thread found there was nothing to do very recently, and
placed itself on the head of the queue in front of this thread.
It must check again after placing itself there, so it can be deemed to
be responsible for any pending work, and this thread can go back to
sleep until woken.
No code ever tests for busy threads any more. Only each thread itself
cares if it is busy. So svc_thread_busy() is no longer needed.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Functions which directly manipulate a 'struct rqst', such as
svc_rqst_alloc() or svc_rqst_release_pages(), can reasonably
have "rqst" in there name.
However functions that act on the running thread, such as
XX_should_sleep() or XX_wait_for_work() should seem more
natural with a "svc_thread_" prefix.
So make those changes.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
With an llist we don't need to take a lock to add a thread to the list,
though we still need a lock to remove it. That will go in the next
patch.
Unlike double-linked lists, a thread cannot reliably remove itself from
the list. Only the first thread can be removed, and that can change
asynchronously. So some care is needed.
We already check if there is pending work to do, so we are unlikely to
add ourselves to the idle list and then want to remove ourselves again.
If we DO find something needs to be done after adding ourselves to the
list, we simply wake up the first thread on the list. If that was us,
we successfully removed ourselves and can continue. If it was some
other thread, they will do the work that needs to be done. We can
safely sleep until woken.
We also remove the test on freezing() from rqst_should_sleep(). Instead
we set TASK_FREEZABLE before scheduling. This makes is safe to
schedule() when a freeze is pending. As we now loop waiting to be
removed from the idle queue, this is a cleaner way to handle freezing.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
We can tell if a pool is congested by checking if the idle list is
empty. We don't need a separate flag.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Rather than searching a list of threads to find an idle one, having a
list of idle threads allows an idle thread to be found immediately.
This adds some spin_lock calls which is not ideal, but as the hold-time
is tiny it is still faster than searching a list. A future patch will
remove them using llist.h. This involves some subtlety and so is left
to a separate patch.
This removes the need for the RQ_BUSY flag. The rqst is "busy"
precisely when it is not on the "idle" list.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc threads are currently stopped using kthread_stop(). This requires
identifying a specific thread. However we don't care which thread
stops, just as long as one does.
So instead, set a flag in the svc_pool to say that a thread needs to
die, and have each thread check this flag instead of calling
kthread_should_stop(). The first thread to find and clear this flag
then moves towards exiting.
This removes an explicit dependency on sp_all_threads which will make a
future patch simpler.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Using svc_recv() for (NFSv4.1) back-channel handling means we have just
one mechanism for waking threads.
Also change kthread_freezable_should_stop() in nfs4_callback_svc() to
kthread_should_stop() as used elsewhere.
kthread_freezable_should_stop() effectively adds a try_to_freeze() call,
and svc_recv() already contains that at an appropriate place.
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The test robot complained that, in some build configurations, the
@error variable in bc_svc_process's only caller is set but never
used. This happens because dprintk() is the only consumer of that
value.
- Remove the dprintk() call sites in favor of the svc_process
tracepoint
- The @error variable and the return value of bc_svc_process() are
now unused, so get rid of them.
- The @serv parameter is set to rqstp->rq_serv by the only caller,
and bc_svc_process() then uses it only to set rqstp->rq_serv. It
can be removed.
- Rename bc_svc_process() according to the convention that
globally-visible RPC server functions have names that begin with
"svc_"; and because it is globally-visible, give it a proper
kdoc comment.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308121314.HA8Rq2XG-lkp@intel.com/
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_get_next_xprt() does a lot more than just get an xprt. It also
decides if it needs to sleep, depending not only on the availability of
xprts but also on the need to exit or handle external work.
So rename it to svc_rqst_wait_for_work() and only do the testing and
waiting. Move all the waiting-related code out of svc_recv() into the
new svc_rqst_wait_for_work().
Move the dequeueing code out of svc_get_next_xprt() into svc_recv().
Previously svc_xprt_dequeue() would be called twice, once before waiting
and possibly once after. Now instead rqst_should_sleep() is called
twice. Once to decide if waiting is needed, and once to check against
after setting the task state do see if we might have missed a wakeup.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_xprt_handle() does lots of things itself, but leaves some to the
caller - svc_recv(). This isn't elegant.
Move that code out of svc_recv() into svc_xprt_handle()
Move the calls to svc_xprt_release() from svc_send() and svc_drop()
(the two possible final steps in svc_process()) and from svc_recv() (in
the case where svc_process() wasn't called) into svc_xprt_handle().
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Use new APIs to dynamically allocate the sunrpc_cred shrinker.
Link: https://lkml.kernel.org/r/20230911094444.68966-19-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Otherwise we run the risk of having the lower_xprt freed from underneath
us, causing an oops that looks like this:
[ 224.150698] BUG: kernel NULL pointer dereference, address: 0000000000000018
[ 224.150951] #PF: supervisor read access in kernel mode
[ 224.151117] #PF: error_code(0x0000) - not-present page
[ 224.151278] PGD 0 P4D 0
[ 224.151361] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 224.151499] CPU: 2 PID: 99 Comm: kworker/u10:6 Not tainted 6.6.0-rc3-g6465e260f487 #41264 a00b0960990fb7bc6d6a330ee03588b67f08a47b
[ 224.151977] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022
[ 224.152216] Workqueue: xprtiod xs_tcp_tls_setup_socket [sunrpc]
[ 224.152434] RIP: 0010:xs_tcp_tls_setup_socket+0x3cc/0x7e0 [sunrpc]
[ 224.152643] Code: 00 00 48 8b 7c 24 08 e9 f3 01 00 00 48 83 7b c0 00 0f 85 d2 01 00 00 49 8d 84 24 f8 05 00 00 48 89 44 24 10 48 8b 00 48 89 c5 <4c> 8b 68 18 66 41 83 3f 0a 75 71 45 31 ff 4c 89 ef 31 f6 e8 5c 76
[ 224.153246] RSP: 0018:ffffb00ec060fd18 EFLAGS: 00010246
[ 224.153427] RAX: 0000000000000000 RBX: ffff8c06c2e53e40 RCX: 0000000000000001
[ 224.153652] RDX: ffff8c073bca2408 RSI: 0000000000000282 RDI: ffff8c06c259ee00
[ 224.153868] RBP: 0000000000000000 R08: ffffffff9da55aa0 R09: 0000000000000001
[ 224.154084] R10: 00000034306c30f1 R11: 0000000000000002 R12: ffff8c06c2e51800
[ 224.154300] R13: ffff8c06c355d400 R14: 0000000004208160 R15: ffff8c06c2e53820
[ 224.154521] FS: 0000000000000000(0000) GS:ffff8c073bd00000(0000) knlGS:0000000000000000
[ 224.154763] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 224.154940] CR2: 0000000000000018 CR3: 0000000062c1e000 CR4: 0000000000750ee0
[ 224.155157] PKRU: 55555554
[ 224.155244] Call Trace:
[ 224.155325] <TASK>
[ 224.155395] ? __die_body+0x68/0xb0
[ 224.155507] ? page_fault_oops+0x34c/0x3a0
[ 224.155635] ? _raw_spin_unlock_irqrestore+0xe/0x40
[ 224.155793] ? exc_page_fault+0x7a/0x1b0
[ 224.155916] ? asm_exc_page_fault+0x26/0x30
[ 224.156047] ? xs_tcp_tls_setup_socket+0x3cc/0x7e0 [sunrpc ae3a15912ae37fd51dafbdbc2dbd069117f8f5c8]
[ 224.156367] ? xs_tcp_tls_setup_socket+0x2fe/0x7e0 [sunrpc ae3a15912ae37fd51dafbdbc2dbd069117f8f5c8]
[ 224.156697] ? __pfx_xs_tls_handshake_done+0x10/0x10 [sunrpc ae3a15912ae37fd51dafbdbc2dbd069117f8f5c8]
[ 224.157013] process_scheduled_works+0x24e/0x450
[ 224.157158] worker_thread+0x21c/0x2d0
[ 224.157275] ? __pfx_worker_thread+0x10/0x10
[ 224.157409] kthread+0xe8/0x110
[ 224.157510] ? __pfx_kthread+0x10/0x10
[ 224.157628] ret_from_fork+0x37/0x50
[ 224.157741] ? __pfx_kthread+0x10/0x10
[ 224.157859] ret_from_fork_asm+0x1b/0x30
[ 224.157983] </TASK>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This reverts commit 88428cc4ae7abcc879295fbb19373dd76aad2bdd.
The problem this commit is intended to fix was comprehensively fixed
in commit 7de62bc09fe6 ("SUNRPC dont update timeout value on connection
reset").
Since then, this commit has been preventing the correct timeout of soft
mounted requests.
Cc: stable@vger.kernel.org # 5.9.x: 09252177d5f9: SUNRPC: Handle major timeout in xprt_adjust_timeout()
Cc: stable@vger.kernel.org # 5.9.x: 7de62bc09fe6: SUNRPC dont update timeout value on connection reset
Cc: stable@vger.kernel.org # 5.9.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
rpcauth_checkverf() should return a distinct error code when a
server recognizes the AUTH_TLS probe but does not support TLS so
that the client's header decoder can respond appropriately and
quickly. No retries are necessary is in this case, since the server
has already affirmatively answered "TLS is unsupported".
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The header file crypto/algapi.h is for internal use only. Use the
header file crypto/utils.h instead.
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently, when GETDEVICEINFO returns multiple locations where each
is a different IP but the server's identity is same as MDS, then
nfs4_set_ds_client() finds the existing nfs_client structure which
has the MDS's max_connect value (and if it's 1), then the 1st IP
on the DS's list will get dropped due to MDS trunking rules. Other
IPs would be added as they fall under the pnfs trunking rules.
For the list of IPs the 1st goes thru calling nfs4_set_ds_client()
which will eventually call nfs4_add_trunk() and call into
rpc_clnt_test_and_add_xprt() which has the check for MDS trunking.
The other IPs (after the 1st one), would call rpc_clnt_add_xprt()
which doesn't go thru that check.
nfs4_add_trunk() is called when MDS trunking is happening and it
needs to enforce the usage of max_connect mount option of the
1st mount. However, this shouldn't be applied to pnfs flow.
Instead, this patch proposed to treat MDS=DS as DS trunking and
make sure that MDS's max_connect limit does not apply to the
1st IP returned in the GETDEVICEINFO list. It does so by
marking the newly created client with a new flag NFS_CS_PNFS
which then used to pass max_connect value to use into the
rpc_clnt_test_and_add_xprt() instead of the existing rpc
client's max_connect value set by the MDS connection.
For example, mount was done without max_connect value set
so MDS's rpc client has cl_max_connect=1. Upon calling into
rpc_clnt_test_and_add_xprt() and using rpc client's value,
the caller passes in max_connect value which is previously
been set in the pnfs path (as a part of handling
GETDEVICEINFO list of IPs) in nfs4_set_ds_client().
However, when NFS_CS_PNFS flag is not set and we know we
are doing MDS trunking, comparing a new IP of the same
server, we then set the max_connect value to the
existing MDS's value and pass that into
rpc_clnt_test_and_add_xprt().
Fixes: dc48e0abee24 ("SUNRPC enforce creation of no more than max_connect xprts")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This reverts commit 0701214cd6e66585a999b132eb72ae0489beb724.
The premise of this commit was incorrect. There are exactly 2 cases
where rpcauth_checkverf() will return an error:
1) If there was an XDR decode problem (i.e. garbage data).
2) If gss_validate() had a problem verifying the RPCSEC_GSS MIC.
In the second case, there are again 2 subcases:
a) The GSS context expires, in which case gss_validate() will force a
new context negotiation on retry by invalidating the cred.
b) The sequence number check failed because an RPC call timed out, and
the client retransmitted the request using a new sequence number,
as required by RFC2203.
In neither subcase is this a fatal error.
Reported-by: Russell Cattelan <cattelan@thebarn.com>
Fixes: 0701214cd6e6 ("SUNRPC: Fail faster on bad verifier")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If the server rejects the credential as being stale, or bad, then we
should mark it for revalidation before retransmitting.
Fixes: 7f5667a5f8c4 ("SUNRPC: Clean up rpc_verify_header()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Pull NFS client updates from Anna Schumaker:
"New Features:
- Enable the NFS v4.2 READ_PLUS operation by default
Stable Fixes:
- NFSv4/pnfs: minor fix for cleanup path in nfs4_get_device_info
- NFS: Fix a potential data corruption
Bugfixes:
- Fix various READ_PLUS issues including:
- smatch warnings
- xdr size calculations
- scratch buffer handling
- 32bit / highmem xdr page handling
- Fix checkpatch errors in file.c
- Fix redundant readdir request after an EOF
- Fix handling of COPY ERR_OFFLOAD_NO_REQ
- Fix assignment of xprtdata.cred
Cleanups:
- Remove unused xprtrdma function declarations
- Clean up an integer overflow check to avoid a warning
- Clean up #includes in dns_resolve.c
- Clean up nfs4_get_device_info so we don't pass a NULL pointer
to __free_page()
- Clean up sunrpc TCP socket timeout configuration
- Guard against READDIR loops when entry names are too long
- Use EXCHID4_FLAG_USE_PNFS_DS for DS servers"
* tag 'nfs-for-6.6-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (22 commits)
pNFS: Fix assignment of xprtdata.cred
NFSv4.2: fix handling of COPY ERR_OFFLOAD_NO_REQ
NFS: Guard against READDIR loop when entry names exceed MAXNAMELEN
NFSv4.1: use EXCHGID4_FLAG_USE_PNFS_DS for DS server
NFS/pNFS: Set the connect timeout for the pNFS flexfiles driver
SUNRPC: Don't override connect timeouts in rpc_clnt_add_xprt()
SUNRPC: Allow specification of TCP client connect timeout at setup
SUNRPC: Refactor and simplify connect timeout
SUNRPC: Set the TCP_SYNCNT to match the socket timeout
NFS: Fix a potential data corruption
nfs: fix redundant readdir request after get eof
nfs/blocklayout: Use the passed in gfp flags
filemap: Fix errors in file.c
NFSv4/pnfs: minor fix for cleanup path in nfs4_get_device_info
NFS: Move common includes outside ifdef
SUNRPC: clean up integer overflow check
xprtrdma: Remove unused function declaration rpcrdma_bc_post_recv()
NFS: Enable the READ_PLUS operation by default
SUNRPC: kmap() the xdr pages during decode
NFSv4.2: Rework scratch handling for READ_PLUS (again)
...
|
|
Pull nfsd updates from Chuck Lever:
"I'm thrilled to announce that the Linux in-kernel NFS server now
offers NFSv4 write delegations. A write delegation enables a client to
cache data and metadata for a single file more aggressively, reducing
network round trips and server workload. Many thanks to Dai Ngo for
contributing this facility, and to Jeff Layton and Neil Brown for
reviewing and testing it.
This release also sees the removal of all support for DES- and
triple-DES-based Kerberos encryption types in the kernel's SunRPC
implementation. These encryption types have been deprecated by the
Internet community for years and are considered insecure. This change
affects both the in-kernel NFS client and server.
The server's UDP and TCP socket transports have now fully adopted
David Howells' new bio_vec iterator so that no more than one sendmsg()
call is needed to transmit each RPC message. In particular, this helps
kTLS optimize record boundaries when sending RPC-with-TLS replies, and
it takes the server a baby step closer to handling file I/O via
folios.
We've begun work on overhauling the SunRPC thread scheduler to remove
a costly linked-list walk when looking for an idle RPC service thread
to wake. The pre-requisites are included in this release. Thanks to
Neil Brown for his ongoing work on this improvement"
* tag 'nfsd-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (56 commits)
Documentation: Add missing documentation for EXPORT_OP flags
SUNRPC: Remove unused declaration rpc_modcount()
SUNRPC: Remove unused declarations
NFSD: da_addr_body field missing in some GETDEVICEINFO replies
SUNRPC: Remove return value of svc_pool_wake_idle_thread()
SUNRPC: make rqst_should_sleep() idempotent()
SUNRPC: Clean up svc_set_num_threads
SUNRPC: Count ingress RPC messages per svc_pool
SUNRPC: Deduplicate thread wake-up code
SUNRPC: Move trace_svc_xprt_enqueue
SUNRPC: Add enum svc_auth_status
SUNRPC: change svc_xprt::xpt_flags bits to enum
SUNRPC: change svc_rqst::rq_flags bits to enum
SUNRPC: change svc_pool::sp_flags bits to enum
SUNRPC: change cache_head.flags bits to enum
SUNRPC: remove timeout arg from svc_recv()
SUNRPC: change svc_recv() to return void.
SUNRPC: call svc_process() from svc_recv().
nfsd: separate nfsd_last_thread() from nfsd_put()
nfsd: Simplify code around svc_exit_thread() call in nfsd()
...
|
|
The returned value is not used (any more), so don't return it.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Based on its name you would think that rqst_should_sleep() would be
read-only, not changing anything. But in fact it will clear
SP_TASK_PENDING if that was set. This is surprising, and it blurs the
line between "check for work to do" and "dequeue work to do".
So change the "test_and_clear" to simple "test" and clear the bit once
the thread has decided to wake up and return to the caller.
With this, it makes sense to *always* set SP_TASK_PENDING when asked,
rather than to set it only if no thread could be woken up.
[ cel: Previously TASK_PENDING indicated there is work waiting but no
idle threads were found to pick up that work. After this patch, it acts
as an XPT_BUSY flag for wake-ups that have no associated xprt. ]
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Document the API contract and remove stale or obvious comments.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|