summaryrefslogtreecommitdiff
path: root/net/smc
AgeCommit message (Collapse)AuthorFilesLines
2018-03-15net/smc: simplify wait when closing listen socketUrsula Braun2-26/+3
Closing of a listen socket wakes up kernel_accept() of smc_tcp_listen_worker(), and then has to wait till smc_tcp_listen_worker() gives up the internal clcsock. The wait logic introduced with commit 127f49705823 ("net/smc: release clcsock from tcp_listen_worker") might wait longer than necessary. This patch implements the idea to implement the wait just with flush_work(), and gets rid of the extra smc_close_wait_listen_clcsock() function. Fixes: 127f49705823 ("net/smc: release clcsock from tcp_listen_worker") Reported-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28net/smc: fix NULL pointer dereference on sock_create_kern() error pathDavide Caratti1-1/+3
when sock_create_kern(..., a) returns an error, 'a' might not be a valid pointer, so it shouldn't be dereferenced to read a->sk->sk_sndbuf and and a->sk->sk_rcvbuf; not doing that caused the following crash: general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 4254 Comm: syzkaller919713 Not tainted 4.16.0-rc1+ #18 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:smc_create+0x14e/0x300 net/smc/af_smc.c:1410 RSP: 0018:ffff8801b06afbc8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8801b63457c0 RCX: ffffffff85a3e746 RDX: 0000000000000004 RSI: 00000000ffffffff RDI: 0000000000000020 RBP: ffff8801b06afbf0 R08: 00000000000007c0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8801b6345c08 R14: 00000000ffffffe9 R15: ffffffff8695ced0 FS: 0000000001afb880(0000) GS:ffff8801db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000040 CR3: 00000001b0721004 CR4: 00000000001606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __sock_create+0x4d4/0x850 net/socket.c:1285 sock_create net/socket.c:1325 [inline] SYSC_socketpair net/socket.c:1409 [inline] SyS_socketpair+0x1c0/0x6f0 net/socket.c:1366 do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x4404b9 RSP: 002b:00007fff44ab6908 EFLAGS: 00000246 ORIG_RAX: 0000000000000035 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004404b9 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 000000000000002b RBP: 00007fff44ab6910 R08: 0000000000000002 R09: 00007fff44003031 R10: 0000000020000040 R11: 0000000000000246 R12: ffffffffffffffff R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000 Code: 48 c1 ea 03 80 3c 02 00 0f 85 b3 01 00 00 4c 8b a3 48 04 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 20 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 82 01 00 00 4d 8b 7c 24 20 48 b8 00 00 00 00 RIP: smc_create+0x14e/0x300 net/smc/af_smc.c:1410 RSP: ffff8801b06afbc8 Fixes: cd6851f30386 smc: remote memory buffers (RMBs) Reported-and-tested-by: syzbot+aa0227369be2dcc26ebe@syzkaller.appspotmail.com Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28net/smc: use link_id of server in confirm link replyKarsten Graul2-1/+2
The CONFIRM LINK reply message must contain the link_id sent by the server. And set the link_id explicitly when initializing the link. Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28net/smc: use a constant for control message lengthKarsten Graul2-2/+2
The sizeof(struct smc_cdc_msg) evaluates to 48 bytes instead of the required 44 bytes. We need to use the constant value of SMC_WR_TX_SIZE to set and check the control message length. Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-12vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds3-16/+16
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01smc: missing poll annotationsAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-02-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds15-319/+448
Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ...
2018-01-31Merge branch 'work.sock_recvmsg' of ↵Linus Torvalds1-8/+10
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull kern_recvmsg reduction from Al Viro: "kernel_recvmsg() is a set_fs()-using wrapper for sock_recvmsg(). In all but one case that is not needed - use of ITER_KVEC for ->msg_iter takes care of the data and does not care about set_fs(). The only exception is svc_udp_recvfrom() where we want cmsg to be store into kernel object; everything else can just use sock_recvmsg() and be done with that. A followup converting svc_udp_recvfrom() away from set_fs() (and killing kernel_recvmsg() off) is *NOT* in here - I'd like to hear what netdev folks think of the approach proposed in that followup)" * 'work.sock_recvmsg' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: tipc: switch to sock_recvmsg() smc: switch to sock_recvmsg() ipvs: switch to sock_recvmsg() mISDN: switch to sock_recvmsg() drbd: switch to sock_recvmsg() lustre lnet_sock_read(): switch to sock_recvmsg() cfs2: switch to sock_recvmsg() ncpfs: switch to sock_recvmsg() dlm: switch to sock_recvmsg() svc_recvfrom(): switch to sock_recvmsg()
2018-01-26net/smc: return booleans instead of integersGustavo A. R. Silva1-2/+2
Return statements in functions returning bool should use true/false instead of 1/0. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26net/smc: release clcsock from tcp_listen_workerUrsula Braun2-10/+36
Closing a listen socket may hit the warning WARN_ON(sock_owned_by_user(sk)) of tcp_close(), if the wake up of the smc_tcp_listen_worker has not yet finished. This patch introduces smc_close_wait_listen_clcsock() making sure the listening internal clcsock has been closed in smc_tcp_listen_work(), before the listening external SMC socket finishes closing. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26net/smc: replace sock_put worker by socket refcountingUrsula Braun6-68/+88
Proper socket refcounting makes the sock_put worker obsolete. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26net/smc: smc_poll improvementsUrsula Braun1-34/+40
Increase the socket refcount during poll wait. Take the socket lock before checking socket state. For a listening socket return a mask independent of state SMC_ACTIVE and cover errors or closed state as well. Get rid of the accept_q loop in smc_accept_poll(). Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26net/smc: handle device, port, and QP error eventsUrsula Braun1-13/+25
RoCE device changes cause an IB event, processed in the global event handler for the ROCE device. Problems for a certain Queue Pair cause a QP event, processed in the QP event handler for this QP. Among those events are port errors and other fatal device errors. All link groups using such a port or device must be terminated in those cases. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26net/smc: check for healthy link group resp. connectionsUrsula Braun4-12/+29
If a problem for at least one connection of a link group is detected, the whole link group and all its connections are terminated. This patch adds a check for healthy link group when trying to reserve a work request, and checks for healthy connections before starting a tx worker. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26net/smc: wake up wr_reg_wait when terminating a link groupUrsula Braun2-11/+11
If a new connection with a new rmb is added to a link group, its memory region is registered. If a link group is terminated, a pending registration requires a wake up. And consolidate setting of tx_flag peer_conn_abort in smc_lgr_terminate(). Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26net/smc: do not reuse a linkgroup with setup problemsUrsula Braun2-0/+20
Once a linkgroup is created successfully, it stays alive for a certain time to service more connections potentially created. If one of the initialization steps for a new linkgroup fails, the linkgroup should not be reused by other connections following. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26net/smc: terminate link group for ib_post_send problemsUrsula Braun2-2/+10
If ib_post_send() fails, terminate all connections of this link group. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26net/smc: handle state SMC_PEERFINCLOSEWAIT correctlyUrsula Braun1-3/+4
A state transition from closing state SMC_PEERFINCLOSEWAIT to closing state SMC_APPFINCLOSEWAIT is not allowed. Once a closing indication from the peer has been received, the socket reaches state SMC_CLOSED. And receiving a peer_conn_abort just changes the state of the socket into one of the states SMC_PROCESSABORT or SMC_CLOSED; sending a peer_conn_abort occurs in smc_close_active() for state SMC_PROCESSABORT only. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26net/smc: cancel tx worker in case of socket abortsUrsula Braun1-3/+9
If an SMC socket is aborted, the tx worker should be cancelled. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: continue waiting if peer signals write_shutdownUrsula Braun1-2/+2
If the peer sends a shutdown WRITE, this should not affect sending in general, and waiting for send buffer space in particular. Stop waiting of the local socket for send buffer space only, if peer signals closing, but not if peer signals just shutdown WRITE. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: improve state change handling after close waitUrsula Braun1-14/+26
When a socket is closed or shutdown, smc waits for data being transmitted in certain states. If the state changes during this wait, the close switch depending on state should be reentered. In addition, state change is avoided if sending of close or shutdown fails. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: make wait for work request uninterruptibleUrsula Braun1-7/+6
Work requests are needed for every ib_post_send(), among them the ib_post_send() to signal closing. If an smc socket program is cancelled, the smc connections should be cleaned up, and require sending of closing signals to the peer. This may fail, if a wait for a free work request is needed, but is cancelled immediately due to the cancel interrupt. To guarantee notification of the peer, the wait for a work request is changed to uninterruptible. And the area to receive work request completion info with ib_poll_cq() is cleared first. And _tx_ variable names are used in the _tx_routines for the demultiplexing common type in the header. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: get rid of tx_pend waits in socket closingUrsula Braun5-57/+0
There is no need to wait for confirmation of pending tx requests for a closing connection, since pending tx slots are dismissed when finishing a connection. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: simplify function smc_clcsock_accept()Ursula Braun1-9/+2
Cleanup to avoid duplicate code in smc_clcsock_accept(). No functional change. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: use local struct sock variables consistentlyUrsula Braun2-34/+37
Cleanup to consistently exploit the local struct sock definitions. No functional change. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07smc: support variable CLC proposal messagesUrsula Braun3-24/+107
According to RFC7609 [1] the CLC proposal message contains an area of unknown length for future growth. Additionally it may contain up to 8 IPv6 prefixes. The current version of the SMC-code does not understand CLC proposal messages using these variable length fields and, thus, is incompatible with SMC implementations in other operating systems. This patch makes sure, SMC understands incoming CLC proposals * with arbitrary length values for future growth * with up to 8 IPv6 prefixes [1] SMC-R Informational RFC: http://www.rfc-editor.org/info/rfc7609 Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07smc: no consumer update in tasklet contextUrsula Braun2-16/+5
The SMC protocol requires to send a separate consumer cursor update, if it cannot be piggybacked to updates of the producer cursor. When receiving a blocked signal from the sender, this update is sent already in tasklet context. In addition consumer cursor updates are sent after data receival. Sending of cursor updates is controlled by sequence numbers. Assuming receiving stray messages the receiver drops updates with older sequence numbers than an already received cursor update with a higher sequence number. Sending consumer cursor updates in tasklet context may result in wrong order sends and its corresponding drops at the receiver. Since it is sufficient to send consumer cursor updates once the data is received, this patch gets rid of the consumer cursor update in tasklet context to guarantee in-sequence arrival of cursor updates. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07smc: cleanup close checking during data receivalUrsula Braun1-4/+1
When waiting for data to be received it must be checked if the peer signals shutdown. The SMC code uses two different checks for this purpose, even though just one check is sufficient. This patch removes the superfluous test for SOCK_DONE. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07smc: no update for unused sk_write_pendingUrsula Braun1-2/+0
The smc code never checks the sk_write_pending sock field. Thus there is no need to update it. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07smc: improve smc_clc_send_decline() error handlingUrsula Braun2-7/+4
Let smc_clc_send_decline() return with an error, if the amount sent is smaller than the length of an smc decline message. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07smc: make smc_close_active_abort() staticUrsula Braun2-2/+1
smc_close_active_abort() is used in smc_close.c only. Make it static. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-03smc: switch to sock_recvmsg()Al Viro1-8/+10
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-28net: annotate ->poll() instancesAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-28anntotate the places where ->poll() return values goAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-23net/smc: Fix preinitialization of buf_desc in __smc_buf_create()Geert Uytterhoeven1-1/+1
With gcc-4.1.2: net/smc/smc_core.c: In function ‘__smc_buf_create’: net/smc/smc_core.c:567: warning: ‘bufsize’ may be used uninitialized in this function Indeed, if the for-loop is never executed, bufsize is used uninitialized. In addition, buf_desc is stored for later use, while it is still a NULL pointer. Before, error handling was done by checking if buf_desc is non-NULL. The cleanup changed this to an error check, but forgot to update the preinitialization of buf_desc to an error pointer. Update the preinitializatin of buf_desc to fix this. Fixes: b33982c3a6838d13 ("net/smc: cleanup function __smc_buf_create()") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-23net/smc: use sk_rcvbuf as start for rmb creationUrsula Braun1-1/+1
Commit 3e034725c0d8 ("net/smc: common functions for RMBs and send buffers") merged handling of SMC receive and send buffers. It introduced sk_buf_size as merged start value for size determination. But since sk_buf_size is not used at all, sk_sndbuf is erroneously used as start for rmb creation. This patch makes sure, sk_buf_size is really used as intended, and sk_rcvbuf is used as start value for rmb creation. Fixes: 3e034725c0d8 ("net/smc: common functions for RMBs and send buffers") Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller21-0/+21
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman21-0/+21
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-26smc: add SMC rendezvous protocolUrsula Braun1-0/+16
The SMC protocol [1] uses a rendezvous protocol to negotiate SMC capability between peers. The current Linux implementation does not yet use this rendezvous protocol and, thus, is not compliant to RFC7609 and incompatible with other SMC implementations like in zOS. This patch adds support for the SMC rendezvous protocol. It uses a new TCP experimental option. With this option, SMC capabilities are exchanged between the peers during the TCP three way handshake. [1] SMC-R Informational RFC: http://www.rfc-editor.org/info/rfc7609 Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-26smc: fix mutex unlocks during link group creationUrsula Braun1-11/+15
Link group creation is synchronized with the smc_create_lgr_pending lock. In smc_listen_work() this mutex is sometimes unlocked, even though it has not been locked before. This issue will surface in presence of the SMC rendezvous code. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-24net: smc_close: mark expected switch fall-throughGustavo A. R. Silva1-1/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case I placed the "fall through" comment on its own line, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-12net/smc: dev_put for netdev after usage of ib_query_gid()Ursula Braun1-4/+8
For RoCEs ib_query_gid() takes a reference count on the net_device. This reference count must be decreased by the caller. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reported-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Fixes: 0cfdd8f92cac ("smc: connection and link group creation") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-12net/smc: replace function pointer get_netdev()Ursula Braun1-17/+9
SMC should not open code the function pointer get_netdev of the IB device. Replacing ib_query_gid(..., NULL) with ib_query_gid(..., gid_attr) allows access to the netdev. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Suggested-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller11-37/+58
2017-09-22net/smc: parameter cleanup in smc_cdc_get_free_slot()Ursula Braun3-8/+8
Use the smc_connection as first parameter with smc_cdc_get_free_slot(). This is just a small code cleanup, no functional change. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22net/smc: no close wait in case of process shut downUrsula Braun1-7/+8
Usually socket closing is delayed if there is still data available in the send buffer to be transmitted. If a process is killed, the delay should be avoided. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22net/smc: introduce a delayUrsula Braun3-10/+16
The number of outstanding work requests is limited. If all work requests are in use, tx processing is postponed to another scheduling of the tx worker. Switch to a delayed worker to have a gap for tx completion queue events before the next retry. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22net/smc: terminate link group if out-of-sync is receivedUrsula Braun3-11/+8
An out-of-sync condition can just be detected by the client. If the server receives a CLC DECLINE message indicating an out-of-sync condition for the link groups, the server must clean up the out-of-sync link group. There is no need for an extra third parameter in smc_clc_send_decline(). Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22net/smc: longer delay for client link group removalUrsula Braun1-4/+12
Client link group creation always follows the server linkgroup creation. If peer creates a new server link group, client has to create a new client link group. If peer reuses a server link group for a new connection, client has to reuse its client link group as well. This patch introduces a longer delay for client link group removal to make sure this link group still exists, once the peer decides to reuse a server link group. This avoids out-of-sync conditions for link groups. If already scheduled, modify the delay. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22net/smc: adapt send request completion notificationUrsula Braun1-1/+1
The solicited flag is meaningful for the receive completion queue. Ask for next work completion of any type on the send queue. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-31 00:29:31 +0300