summaryrefslogtreecommitdiff
path: root/net/sctp
AgeCommit message (Collapse)AuthorFilesLines
2013-10-17sctp: Perform software checksum if packet has to be fragmented.Vlad Yasevich1-1/+1
IP/IPv6 fragmentation knows how to compute only TCP/UDP checksum. This causes problems if SCTP packets has to be fragmented and ipsummed has been set to PARTIAL due to checksum offload support. This condition can happen when retransmitting after MTU discover, or when INIT or other control chunks are larger then MTU. Check for the rare fragmentation condition in SCTP and use software checksum calculation in this case. CC: Fan Du <fan.du@windriver.com> Signed-off-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17sctp: Use software crc32 checksum when xfrm transform will happen.Fan Du1-1/+2
igb/ixgbe have hardware sctp checksum support, when this feature is enabled and also IPsec is armed to protect sctp traffic, ugly things happened as xfrm_output checks CHECKSUM_PARTIAL to do checksum operation(sum every thing up and pack the 16bits result in the checksum field). The result is fail establishment of sctp communication. Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-17net: sctp: rfc4443: do not report ICMP redirects to user spaceDaniel Borkmann2-3/+2
Adapt the same behaviour for SCTP as present in TCP for ICMP redirect messages. For IPv6, RFC4443, section 2.4. says: ... (e) An ICMPv6 error message MUST NOT be originated as a result of receiving the following: ... (e.2) An ICMPv6 redirect message [IPv6-DISC]. ... Therefore, do not report an error to user space, just invoke dst's redirect callback and leave, same for IPv4 as done in TCP as well. The implication w/o having this patch could be that the reception of such packets would generate a poll notification and in worst case it could even tear down the whole connection. Therefore, stop updating sk_err on redirects. Reported-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Suggested-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-13net: sctp: fix ipv6 ipsec encryption bug in sctp_v6_xmitDaniel Borkmann1-29/+13
Alan Chester reported an issue with IPv6 on SCTP that IPsec traffic is not being encrypted, whereas on IPv4 it is. Setting up an AH + ESP transport does not seem to have the desired effect: SCTP + IPv4: 22:14:20.809645 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto AH (51), length 116) 192.168.0.2 > 192.168.0.5: AH(spi=0x00000042,sumlen=16,seq=0x1): ESP(spi=0x00000044,seq=0x1), length 72 22:14:20.813270 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto AH (51), length 340) 192.168.0.5 > 192.168.0.2: AH(spi=0x00000043,sumlen=16,seq=0x1): SCTP + IPv6: 22:31:19.215029 IP6 (class 0x02, hlim 64, next-header SCTP (132) payload length: 364) fe80::222:15ff:fe87:7fc.3333 > fe80::92e6:baff:fe0d:5a54.36767: sctp 1) [INIT ACK] [init tag: 747759530] [rwnd: 62464] [OS: 10] [MIS: 10] Moreover, Alan says: This problem was seen with both Racoon and Racoon2. Other people have seen this with OpenSwan. When IPsec is configured to encrypt all upper layer protocols the SCTP connection does not initialize. After using Wireshark to follow packets, this is because the SCTP packet leaves Box A unencrypted and Box B believes all upper layer protocols are to be encrypted so it drops this packet, causing the SCTP connection to fail to initialize. When IPsec is configured to encrypt just SCTP, the SCTP packets are observed unencrypted. In fact, using `socat sctp6-listen:3333 -` on one end and transferring "plaintext" string on the other end, results in cleartext on the wire where SCTP eventually does not report any errors, thus in the latter case that Alan reports, the non-paranoid user might think he's communicating over an encrypted transport on SCTP although he's not (tcpdump ... -X): ... 0x0030: 5d70 8e1a 0003 001a 177d eb6c 0000 0000 ]p.......}.l.... 0x0040: 0000 0000 706c 6169 6e74 6578 740a 0000 ....plaintext... Only in /proc/net/xfrm_stat we can see XfrmInTmplMismatch increasing on the receiver side. Initial follow-up analysis from Alan's bug report was done by Alexey Dobriyan. Also thanks to Vlad Yasevich for feedback on this. SCTP has its own implementation of sctp_v6_xmit() not calling inet6_csk_xmit(). This has the implication that it probably never really got updated along with changes in inet6_csk_xmit() and therefore does not seem to invoke xfrm handlers. SCTP's IPv4 xmit however, properly calls ip_queue_xmit() to do the work. Since a call to inet6_csk_xmit() would solve this problem, but result in unecessary route lookups, let us just use the cached flowi6 instead that we got through sctp_v6_get_dst(). Since all SCTP packets are being sent through sctp_packet_transmit(), we do the route lookup / flow caching in sctp_transport_route(), hold it in tp->dst and skb_dst_set() right after that. If we would alter fl6->daddr in sctp_v6_xmit() to np->opt->srcrt, we possibly could run into the same effect of not having xfrm layer pick it up, hence, use fl6_update_dst() in sctp_v6_get_dst() instead to get the correct source routed dst entry, which we assign to the skb. Also source address routing example from 625034113 ("sctp: fix sctp to work with ipv6 source address routing") still works with this patch! Nevertheless, in RFC5095 it is actually 'recommended' to not use that anyway due to traffic amplification [1]. So it seems we're not supposed to do that anyway in sctp_v6_xmit(). Moreover, if we overwrite the flow destination here, the lower IPv6 layer will be unable to put the correct destination address into IP header, as routing header is added in ipv6_push_nfrag_opts() but then probably with wrong final destination. Things aside, result of this patch is that we do not have any XfrmInTmplMismatch increase plus on the wire with this patch it now looks like: SCTP + IPv6: 08:17:47.074080 IP6 2620:52:0:102f:7a2b:cbff:fe27:1b0a > 2620:52:0:102f:213:72ff:fe32:7eba: AH(spi=0x00005fb4,seq=0x1): ESP(spi=0x00005fb5,seq=0x1), length 72 08:17:47.074264 IP6 2620:52:0:102f:213:72ff:fe32:7eba > 2620:52:0:102f:7a2b:cbff:fe27:1b0a: AH(spi=0x00003d54,seq=0x1): ESP(spi=0x00003d55,seq=0x1), length 296 This fixes Kernel Bugzilla 24412. This security issue seems to be present since 2.6.18 kernels. Lets just hope some big passive adversary in the wild didn't have its fun with that. lksctp-tools IPv6 regression test suite passes as well with this patch. [1] http://www.secdev.org/conf/IPv6_RH_security-csw07.pdf Reported-by: Alan Chester <alan.chester@tekelec.com> Reported-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-12net: sctp: fix smatch warning in sctp_send_asconf_del_ipDaniel Borkmann1-0/+3
This was originally reported in [1] and posted by Neil Horman [2], he said: Fix up a missed null pointer check in the asconf code. If we don't find a local address, but we pass in an address length of more than 1, we may dereference a NULL laddr pointer. Currently this can't happen, as the only users of the function pass in the value 1 as the addrcnt parameter, but its not hot path, and it doesn't hurt to check for NULL should that ever be the case. The callpath from sctp_asconf_mgmt() looks okay. But this could be triggered from sctp_setsockopt_bindx() call with SCTP_BINDX_REM_ADDR and addrcnt > 1 while passing all possible addresses from the bind list to SCTP_BINDX_REM_ADDR so that we do *not* find a single address in the association's bind address list that is not in the packed array of addresses. If this happens when we have an established association with ASCONF-capable peers, then we could get a NULL pointer dereference as we only check for laddr == NULL && addrcnt == 1 and call later sctp_make_asconf_update_ip() with NULL laddr. BUT: this actually won't happen as sctp_bindx_rem() will catch such a case and return with an error earlier. As this is incredably unintuitive and error prone, add a check to catch at least future bugs here. As Neil says, its not hot path. Introduced by 8a07eb0a5 ("sctp: Add ASCONF operation on the single-homed host"). [1] http://www.spinics.net/lists/linux-sctp/msg02132.html [2] http://www.spinics.net/lists/linux-sctp/msg02133.html Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Michio Honda <micchie@sfc.wide.ad.jp> Acked-By: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-12net: sctp: fix bug in sctp_poll for SOCK_SELECT_ERR_QUEUEDaniel Borkmann1-1/+1
If we do not add braces around ... mask |= POLLERR | sock_flag(sk, SOCK_SELECT_ERR_QUEUE) ? POLLPRI : 0; ... then this condition always evaluates to true as POLLERR is defined as 8 and binary or'd with whatever result comes out of sock_flag(). Hence instead of (X | Y) ? A : B, transform it into X | (Y ? A : B). Unfortunatelty, commit 8facd5fb73 ("net: fix smatch warnings inside datagram_poll") forgot about SCTP. :-( Introduced by 7d4c04fc170 ("net: add option to enable error queue packets waking select"). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04net: sctp: Fix data chunk fragmentation for MTU values which are not ↵Alexander Sverdlin1-2/+2
multiple of 4 net: sctp: Fix data chunk fragmentation for MTU values which are not multiple of 4 Initially the problem was observed with ipsec, but later it became clear that SCTP data chunk fragmentation algorithm has problems with MTU values which are not multiple of 4. Test program was used which just transmits 2000 bytes long packets to other host. tcpdump was used to observe re-fragmentation in IP layer after SCTP already fragmented data chunks. With MTU 1500: 12:54:34.082904 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto SCTP (132), length 1500) 10.151.38.153.39303 > 10.151.24.91.54321: sctp (1) [DATA] (B) [TSN: 2366088589] [SID: 0] [SSEQ 1] [PPID 0x0] 12:54:34.082933 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto SCTP (132), length 596) 10.151.38.153.39303 > 10.151.24.91.54321: sctp (1) [DATA] (E) [TSN: 2366088590] [SID: 0] [SSEQ 1] [PPID 0x0] 12:54:34.090576 IP (tos 0x2,ECT(0), ttl 63, id 0, offset 0, flags [DF], proto SCTP (132), length 48) 10.151.24.91.54321 > 10.151.38.153.39303: sctp (1) [SACK] [cum ack 2366088590] [a_rwnd 79920] [#gap acks 0] [#dup tsns 0] With MTU 1499: 13:02:49.955220 IP (tos 0x2,ECT(0), ttl 64, id 48215, offset 0, flags [+], proto SCTP (132), length 1492) 10.151.38.153.39084 > 10.151.24.91.54321: sctp[|sctp] 13:02:49.955249 IP (tos 0x2,ECT(0), ttl 64, id 48215, offset 1472, flags [none], proto SCTP (132), length 28) 10.151.38.153 > 10.151.24.91: ip-proto-132 13:02:49.955262 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto SCTP (132), length 600) 10.151.38.153.39084 > 10.151.24.91.54321: sctp (1) [DATA] (E) [TSN: 404355346] [SID: 0] [SSEQ 1] [PPID 0x0] 13:02:49.956770 IP (tos 0x2,ECT(0), ttl 63, id 0, offset 0, flags [DF], proto SCTP (132), length 48) 10.151.24.91.54321 > 10.151.38.153.39084: sctp (1) [SACK] [cum ack 404355346] [a_rwnd 79920] [#gap acks 0] [#dup tsns 0] Here problem in data portion limit calculation leads to re-fragmentation in IP, which is sub-optimal. The problem is max_data initial value, which doesn't take into account the fact, that data chunk must be padded to 4-bytes boundary. It's enough to correct max_data, because all later adjustments are correctly aligned to 4-bytes boundary. After the fix is applied, everything is fragmented correctly for uneven MTUs: 15:16:27.083881 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto SCTP (132), length 1496) 10.151.38.153.53417 > 10.151.24.91.54321: sctp (1) [DATA] (B) [TSN: 3077098183] [SID: 0] [SSEQ 1] [PPID 0x0] 15:16:27.083907 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto SCTP (132), length 600) 10.151.38.153.53417 > 10.151.24.91.54321: sctp (1) [DATA] (E) [TSN: 3077098184] [SID: 0] [SSEQ 1] [PPID 0x0] 15:16:27.085640 IP (tos 0x2,ECT(0), ttl 63, id 0, offset 0, flags [DF], proto SCTP (132), length 48) 10.151.24.91.54321 > 10.151.38.153.53417: sctp (1) [SACK] [cum ack 3077098184] [a_rwnd 79920] [#gap acks 0] [#dup tsns 0] The bug was there for years already, but - is a performance issue, the packets are still transmitted - doesn't show up with default MTU 1500, but possibly with ipsec (MTU 1438) Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nsn.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04net: sctp: probe: allow more advanced ingress filtering by markDaniel Borkmann1-5/+13
This is a follow-up commit for commit b1dcdc68b1f4 ("net: tcp_probe: allow more advanced ingress filtering by mark") that allows for advanced SCTP probe module filtering based on skb mark (for a more detailed description and advantages using mark, refer to b1dcdc68b1f4). The current option to filter by a given port is still being preserved. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29net: sctp: sctp_verify_init: clean up mandatory checks and add commentDaniel Borkmann1-14/+12
Add a comment related to RFC4960 explaning why we do not check for initial TSN, and while at it, remove yoda notation checks and clean up code from checks of mandatory conditions. That's probably just really minor, but makes reviewing easier. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23net: sctp_probe: simplify code by using %pISc format specifierDaniel Borkmann1-7/+2
We can simply use the %pISc format specifier that was recently added and thus remove some code that distinguishes between IPv4 and IPv6. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-4/+4
2013-08-16net: proc_fs: trivial: print UIDs as unsigned intFrancesco Fusco1-2/+2
UIDs are printed in the proc_fs as signed int, whereas they are unsigned int. Signed-off-by: Francesco Fusco <ffusco@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-14net: sctp: Add rudimentary infrastructure to account for control chunksVlad Yasevich1-30/+69
This patch adds a base infrastructure that allows SCTP to do memory accounting for control chunks. Real accounting code will follow. This patch alos fixes the following triggered bug ... [ 553.109742] kernel BUG at include/linux/skbuff.h:1813! [ 553.109766] invalid opcode: 0000 [#1] SMP [ 553.109789] Modules linked in: sctp libcrc32c rfcomm [...] [ 553.110259] uinput i915 i2c_algo_bit drm_kms_helper e1000e drm ptp pps_core i2c_core wmi video sunrpc [ 553.110320] CPU: 0 PID: 1636 Comm: lt-test_1_to_1_ Not tainted 3.11.0-rc3+ #2 [ 553.110350] Hardware name: LENOVO 74597D6/74597D6, BIOS 6DET60WW (3.10 ) 09/17/2009 [ 553.110381] task: ffff88020a01dd40 ti: ffff880204ed0000 task.ti: ffff880204ed0000 [ 553.110411] RIP: 0010:[<ffffffffa0698017>] [<ffffffffa0698017>] skb_orphan.part.9+0x4/0x6 [sctp] [ 553.110459] RSP: 0018:ffff880204ed1bb8 EFLAGS: 00010286 [ 553.110483] RAX: ffff8802086f5a40 RBX: ffff880204303300 RCX: 0000000000000000 [ 553.110487] RDX: ffff880204303c28 RSI: ffff8802086f5a40 RDI: ffff880202158000 [ 553.110487] RBP: ffff880204ed1bb8 R08: 0000000000000000 R09: 0000000000000000 [ 553.110487] R10: ffff88022f2d9a04 R11: ffff880233001600 R12: 0000000000000000 [ 553.110487] R13: ffff880204303c00 R14: ffff8802293d0000 R15: ffff880202158000 [ 553.110487] FS: 00007f31b31fe740(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000 [ 553.110487] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 553.110487] CR2: 000000379980e3e0 CR3: 000000020d225000 CR4: 00000000000407f0 [ 553.110487] Stack: [ 553.110487] ffff880204ed1ca8 ffffffffa068d7fc 0000000000000000 0000000000000000 [ 553.110487] 0000000000000000 ffff8802293d0000 ffff880202158000 ffffffff81cb7900 [ 553.110487] 0000000000000000 0000400000001c68 ffff8802086f5a40 000000000000000f [ 553.110487] Call Trace: [ 553.110487] [<ffffffffa068d7fc>] sctp_sendmsg+0x6bc/0xc80 [sctp] [ 553.110487] [<ffffffff8128f185>] ? sock_has_perm+0x75/0x90 [ 553.110487] [<ffffffff815a3593>] inet_sendmsg+0x63/0xb0 [ 553.110487] [<ffffffff8128f2b3>] ? selinux_socket_sendmsg+0x23/0x30 [ 553.110487] [<ffffffff8151c5d6>] sock_sendmsg+0xa6/0xd0 [ 553.110487] [<ffffffff81637b05>] ? _raw_spin_unlock_bh+0x15/0x20 [ 553.110487] [<ffffffff8151cd38>] SYSC_sendto+0x128/0x180 [ 553.110487] [<ffffffff8151ce6b>] ? SYSC_connect+0xdb/0x100 [ 553.110487] [<ffffffffa0690031>] ? sctp_inet_listen+0x71/0x1f0 [sctp] [ 553.110487] [<ffffffff8151d35e>] SyS_sendto+0xe/0x10 [ 553.110487] [<ffffffff81640202>] system_call_fastpath+0x16/0x1b [ 553.110487] Code: e0 48 c7 c7 00 22 6a a0 e8 67 a3 f0 e0 48 c7 [...] [ 553.110487] RIP [<ffffffffa0698017>] skb_orphan.part.9+0x4/0x6 [sctp] [ 553.110487] RSP <ffff880204ed1bb8> [ 553.121578] ---[ end trace 46c20c5903ef5be2 ]--- The approach taken here is to split data and control chunks creation a bit. Data chunks already have memory accounting so noting needs to happen. For control chunks, add stubs handlers. Signed-off-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13net: sctp: sctp_transport_destroy{, _rcu}: fix potential pointer corruptionDaniel Borkmann1-2/+2
Probably this one is quite unlikely to be triggered, but it's more safe to do the call_rcu() at the end after we have dropped the reference on the asoc and freed sctp packet chunks. The reason why is because in sctp_transport_destroy_rcu() the transport is being kfree()'d, and if we're unlucky enough we could run into corrupted pointers. Probably that's more of theoretical nature, but it's safer to have this simple fix. Introduced by commit 8c98653f ("sctp: sctp_close: fix release of bindings for deferred call_rcu's"). I also did the 8c98653f regression test and it's fine that way. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13net: sctp: sctp_assoc_control_transport: fix MTU size in SCTP_PF stateDaniel Borkmann1-2/+2
The SCTP Quick failover draft [1] section 5.1, point 5 says that the cwnd should be 1 MTU. So, instead of 1, set it to 1 MTU. [1] https://tools.ietf.org/html/draft-nishida-tsvwg-sctp-failover-05 Reported-by: Karl Heiss <kheiss@gmail.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-10Revert "net: sctp: convert sctp_checksum_disable module param into sctp sysctl"David S. Miller4-18/+6
This reverts commit cda5f98e36576596b9230483ec52bff3cc97eb21. As per Vlad's request. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09net: sctp: trivial: update bug report in header commentDaniel Borkmann27-162/+0
With the restructuring of the lksctp.org site, we only allow bug reports through the SCTP mailing list linux-sctp@vger.kernel.org, not via SF, as SF is only used for web hosting and nothing more. While at it, also remove the obvious statement that bugs will be fixed and incooperated into the kernel. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09net: sctp: convert sctp_checksum_disable module param into sctp sysctlDaniel Borkmann4-6/+18
Get rid of the last module parameter for SCTP and make this configurable via sysctl for SCTP like all the rest of SCTP's configuration knobs. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02sctp: Don't lookup dst if transport dst is still validfan.du1-1/+1
When sctp sits on IPv6, sctp_transport_dst_check pass cookie as ZERO, as a result ip6_dst_check always fail out. This behaviour makes transport->dst useless, because every sctp_packet_transmit must look for valid dst. Add a dst_cookie into sctp_transport, and set the cookie whenever we get new dst for sctp_transport. So dst validness could be checked against it. Since I have split genid for IPv4 and IPv6, also delete/add IPv6 address will also bump IPv6 genid. So issues we discussed in: http://marc.info/?l=linux-netdev&m=137404469219410&w=4 have all been sloved for this patch. Signed-off-by: Fan Du <fan.du@windriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-28net/sctp: Refactor SCTP skb checksum computationJoe Stringer1-9/+1
This patch consolidates the SCTP checksum calculation code from various places to a single new function, sctp_compute_cksum(skb, offset). Signed-off-by: Joe Stringer <joe@wand.net.nz> Reviewed-by: Julian Anastasov <ja@ssi.bg> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-25net: sctp: trivial: update mailing list addressDaniel Borkmann27-28/+28
The SCTP mailing list address to send patches or questions to is linux-sctp@vger.kernel.org and not lksctp-developers@lists.sourceforge.net anymore. Therefore, update all occurences. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-09net: sctp: confirm route during forward progressDaniel Borkmann2-0/+15
This fix has been proposed originally by Vlad Yasevich. He says: When SCTP makes forward progress (receives a SACK that acks new chunks, renegs, or answeres 0-window probes) or when HB-ACK arrives, mark the route as confirmed so we don't unnecessarily send NUD probes. Having a simple SCTP client/server that exchange data chunks every 1sec, without this patch ARP requests are sent periodically every 40-60sec. With this fix applied, an ARP request is only done once right at the "session" beginning. Also, when clearing the related ARP cache entry manually during the session, a new request is correctly done. I have only "backported" this to net-next and tested that it works, so full credit goes to Vlad. Signed-off-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03sctp: use get_unused_fd_flags(0) instead of get_unused_fd()Yann Droneaud1-1/+1
Macro get_unused_fd() is used to allocate a file descriptor with default flags. Those default flags (0) can be "unsafe": O_CLOEXEC must be used by default to not leak file descriptor across exec(). Instead of macro get_unused_fd(), functions anon_inode_getfd() or get_unused_fd_flags() should be used with flags given by userspace. If not possible, flags should be set to O_CLOEXEC to provide userspace with a default safe behavor. In a further patch, get_unused_fd() will be removed so that new code start using anon_inode_getfd() or get_unused_fd_flags() with correct flags. This patch replaces calls to get_unused_fd() with equivalent call to get_unused_fd_flags(0) to preserve current behavor for existing code. The hard coded flag value (0) should be reviewed on a per-subsystem basis, and, if possible, set to O_CLOEXEC. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: sctp: get rid of SCTP_DBG_TSNS entirelyDaniel Borkmann2-114/+0
After having reworked the debugging framework, Neil and Vlad agreed to get rid of the leftover SCTP_DBG_TSNS code for a couple of reasons: We can use systemtap scripts to investigate these things, we now have pr_debug() helpers that make life easier, and if we really need anything else besides those tools, we will be forced to come up with something better than we have there. Therefore, get rid of this ifdef debugging code entirely for now. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: Neil Horman <nhorman@tuxdriver.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: sctp: rework debugging framework to use pr_debug and friendsDaniel Borkmann16-409/+383
We should get rid of all own SCTP debug printk macros and use the ones that the kernel offers anyway instead. This makes the code more readable and conform to the kernel code, and offers all the features of dynamic debbuging that pr_debug() et al has, such as only turning on/off portions of debug messages at runtime through debugfs. The runtime cost of having CONFIG_DYNAMIC_DEBUG enabled, but none of the debug statements printing, is negligible [1]. If kernel debugging is completly turned off, then these statements will also compile into "empty" functions. While we're at it, we also need to change the Kconfig option as it /now/ only refers to the ifdef'ed code portions in outqueue.c that enable further debugging/tracing of SCTP transaction fields. Also, since SCTP_ASSERT code was enabled with this Kconfig option and has now been removed, we transform those code parts into WARNs resp. where appropriate BUG_ONs so that those bugs can be more easily detected as probably not many people have SCTP debugging permanently turned on. To turn on all SCTP debugging, the following steps are needed: # mount -t debugfs none /sys/kernel/debug # echo -n 'module sctp +p' > /sys/kernel/debug/dynamic_debug/control This can be done more fine-grained on a per file, per line basis and others as described in [2]. [1] https://www.kernel.org/doc/ols/2009/ols2009-pages-39-46.pdf [2] Documentation/dynamic-debug-howto.txt Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-26net: sctp: simplify sctp_get_portDaniel Borkmann1-4/+1
No need to have an extra ret variable when we directly can return the value of sctp_get_port_local(). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-26net: sctp: decouple cleaning some socket data from endpointDaniel Borkmann2-10/+25
Rather instead of having the endpoint clean the garbage from the socket, use a sk_destruct handler sctp_destruct_sock(), that does the job for that when there are no more references on the socket. At least do this for our crypto transform through crypto_free_hash() that is allocated when in listening state. Also, perform sctp_put_port() only when sk is valid. At a later point in time we can still determine if there's an option of placing this into sk_prot->unhash() or sctp_endpoint_free() without any races. For now, leave it in sctp_endpoint_destroy() though. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-26net: sctp: minor: sctp_seq_dump_local_addrs add missing newlineDaniel Borkmann1-1/+1
A trailing newline has been forgotten to add into the WARN(). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-26net: sctp: migrate cookie life from timeval to ktimeDaniel Borkmann3-29/+12
Currently, SCTP code defines its own timeval functions (since timeval is rarely used inside the kernel by others), namely tv_lt() and TIMEVAL_ADD() macros, that operate on SCTP cookie expiration. We might as well remove all those, and operate directly on ktime structures for a couple of reasons: ktime is available on all archs; complexity of ktime calculations depending on the arch is less than (reduces to a simple arithmetic operations on archs with BITS_PER_LONG == 64 or CONFIG_KTIME_SCALAR) or equal to timeval functions (other archs); code becomes more readable; macros can be thrown out. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-20sctp: Convert __list_for_each use to list_for_eachDave Jones1-1/+1
Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-4/+8
Conflicts: drivers/net/wireless/ath/ath9k/Kconfig drivers/net/xen-netback/netback.c net/batman-adv/bat_iv_ogm.c net/wireless/nl80211.c The ath9k Kconfig conflict was a change of a Kconfig option name right next to the deletion of another option. The xen-netback conflict was overlapping changes involving the handling of the notify list in xen_netbk_rx_action(). Batman conflict resolution provided by Antonio Quartulli, basically keep everything in both conflict hunks. The nl80211 conflict is a little more involved. In 'net' we added a dynamic memory allocation to nl80211_dump_wiphy() to fix a race that Linus reported. Meanwhile in 'net-next' the handlers were converted to use pre and post doit handlers which use a flag to determine whether to hold the RTNL mutex around the operation. However, the dump handlers to not use this logic. Instead they have to explicitly do the locking. There were apparent bugs in the conversion of nl80211_dump_wiphy() in that we were not dropping the RTNL mutex in all the return paths, and it seems we very much should be doing so. So I fixed that whilst handling the overlapping changes. To simplify the initial returns, I take the RTNL mutex after we try to allocate 'tb'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-18net: sctp: remove SCTP_STATIC macroDaniel Borkmann8-65/+57
SCTP_STATIC is just another define for the static keyword. It's use is inconsistent in the SCTP code anyway and it was introduced in the initial implementation of SCTP in 2.5. We have a regression suite in lksctp-tools, but this is for user space only, so noone makes use of this macro anymore. The kernel test suite for 2.5 is incompatible with the current SCTP code anyway. So simply Remove it, to be more consistent with the rest of the kernel code. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-18net: sctp: get rid of t_new macro for kzallocDaniel Borkmann6-6/+7
t_new rather obfuscates things where everyone else is using actual function names instead of that macro, so replace it with kzalloc, which is the function t_new wraps. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-15net: sctp: sctp_association_init: put refs in reverse orderDaniel Borkmann1-4/+3
In case we need to bail out for whatever reason during assoc init, we call sctp_endpoint_put() and then sock_put(), however, we've hold both refs in reverse, non-symmetric order, so first sctp_endpoint_hold() and then sock_hold(). Reverse this, so that in an error case we have sock_put() and then sctp_endpoint_put(). Actually shouldn't matter too much, since both cleanup paths do the right thing, but that way, it is more consistent with the rest of the code. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-15net: sctp: minor: remove variable in sctp_init_sockDaniel Borkmann1-4/+2
It's only used at this one time, so we could remove it as well. This is valid and also makes it more explicit/obvious that in case of error the sp->ep is NULL here, i.e. for the sctp_destroy_sock() check that was recently added. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-15net: sctp: sctp_sf_do_prm_asoc: do SCTP_CMD_INIT_CHOOSE_TRANSPORT firstDaniel Borkmann1-4/+4
While this currently cannot trigger any NULL pointer dereference in sctp_seq_dump_local_addrs(), better change the order of commands to prevent a future bug to happen. Although we first add SCTP_CMD_NEW_ASOC and then set the SCTP_CMD_INIT_CHOOSE_TRANSPORT, it is okay for now, since this primitive is only called by sctp_connect() or sctp_sendmsg() with sctp_assoc_add_peer() set first. However, lets do this precaution and first set the transport and then add it to the association hashlist to prevent in future something to possibly triggering this. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-15net: sctp: sideeffect: throw BUG if primary_path is NULLDaniel Borkmann2-4/+13
This clearly states a BUG somewhere in the SCTP code as e.g. fixed once in f28156335 ("sctp: Use correct sideffect command in duplicate cookie handling"). If this ever happens, throw a trace in the sideeffect engine where assocs clearly must have a primary_path assigned. When in sctp_seq_dump_local_addrs() also throw a WARN and bail out since we do not need to panic for printing this one asterisk. Also, it will avoid the not so obvious case when primary != NULL test passes and at a later point in time triggering a NULL ptr dereference caused by primary. While at it, also fix up the white space. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-14sctp: fully initialize sctp_outq in sctp_outq_initNeil Horman1-4/+2
In commit 2f94aabd9f6c925d77aecb3ff020f1cc12ed8f86 (refactor sctp_outq_teardown to insure proper re-initalization) we modified sctp_outq_teardown to use sctp_outq_init to fully re-initalize the outq structure. Steve West recently asked me why I removed the q->error = 0 initalization from sctp_outq_teardown. I did so because I was operating under the impression that sctp_outq_init would properly initalize that value for us, but it doesn't. sctp_outq_init operates under the assumption that the outq struct is all 0's (as it is when called from sctp_association_init), but using it in __sctp_outq_teardown violates that assumption. We should do a memset in sctp_outq_init to ensure that the entire structure is in a known state there instead. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: "West, Steve (NSN - US/Fort Worth)" <steve.west@nsn.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: netdev@vger.kernel.org CC: davem@davemloft.net Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13net: Convert uses of typedef ctl_table to struct ctl_tableJoe Perches1-5/+5
Reduce the uses of this unnecessary typedef. Done via perl script: $ git grep --name-only -w ctl_table net | \ xargs perl -p -i -e '\ sub trim { my ($local) = @_; $local =~ s/(^\s+|\s+$)//g; return $local; } \ s/\b(?<!struct\s)ctl_table\b(\s*\*\s*|\s+\w+)/"struct ctl_table " . trim($1)/ge' Reflow the modified lines that now exceed 80 columns. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13sctp: Correct byte order of access to skb->{network, transport}_headerSimon Horman1-1/+1
Corrects an byte order conflict introduced by 158874cac61245b84e939c92c53db7000122b7b0 ("sctp: Correct access to skb->{network, transport}_header"). The values in question are host byte order. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-11net: sctp: fix NULL pointer dereference in socket destructionDaniel Borkmann1-0/+6
While stress testing sctp sockets, I hit the following panic: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp] PGD 7cead067 PUD 7ce76067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: sctp(F) libcrc32c(F) [...] CPU: 7 PID: 2950 Comm: acc Tainted: GF 3.10.0-rc2+ #1 Hardware name: Dell Inc. PowerEdge T410/0H19HD, BIOS 1.6.3 02/01/2011 task: ffff88007ce0e0c0 ti: ffff88007b568000 task.ti: ffff88007b568000 RIP: 0010:[<ffffffffa0490c4e>] [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp] RSP: 0018:ffff88007b569e08 EFLAGS: 00010292 RAX: 0000000000000000 RBX: ffff88007db78a00 RCX: dead000000200200 RDX: ffffffffa049fdb0 RSI: ffff8800379baf38 RDI: 0000000000000000 RBP: ffff88007b569e18 R08: ffff88007c230da0 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880077990d00 R14: 0000000000000084 R15: ffff88007db78a00 FS: 00007fc18ab61700(0000) GS:ffff88007fc60000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000020 CR3: 000000007cf9d000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88007b569e38 ffff88007db78a00 ffff88007b569e38 ffffffffa049fded ffffffff81abf0c0 ffff88007db78a00 ffff88007b569e58 ffffffff8145b60e 0000000000000000 0000000000000000 ffff88007b569eb8 ffffffff814df36e Call Trace: [<ffffffffa049fded>] sctp_destroy_sock+0x3d/0x80 [sctp] [<ffffffff8145b60e>] sk_common_release+0x1e/0xf0 [<ffffffff814df36e>] inet_create+0x2ae/0x350 [<ffffffff81455a6f>] __sock_create+0x11f/0x240 [<ffffffff81455bf0>] sock_create+0x30/0x40 [<ffffffff8145696c>] SyS_socket+0x4c/0xc0 [<ffffffff815403be>] ? do_page_fault+0xe/0x10 [<ffffffff8153cb32>] ? page_fault+0x22/0x30 [<ffffffff81544e02>] system_call_fastpath+0x16/0x1b Code: 0c c9 c3 66 2e 0f 1f 84 00 00 00 00 00 e8 fb fe ff ff c9 c3 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 <48> 8b 47 20 48 89 fb c6 47 1c 01 c6 40 12 07 e8 9e 68 01 00 48 RIP [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp] RSP <ffff88007b569e08> CR2: 0000000000000020 ---[ end trace e0d71ec1108c1dd9 ]--- I did not hit this with the lksctp-tools functional tests, but with a small, multi-threaded test program, that heavily allocates, binds, listens and waits in accept on sctp sockets, and then randomly kills some of them (no need for an actual client in this case to hit this). Then, again, allocating, binding, etc, and then killing child processes. This panic then only occurs when ``echo 1 > /proc/sys/net/sctp/auth_enable'' is set. The cause for that is actually very simple: in sctp_endpoint_init() we enter the path of sctp_auth_init_hmacs(). There, we try to allocate our crypto transforms through crypto_alloc_hash(). In our scenario, it then can happen that crypto_alloc_hash() fails with -EINTR from crypto_larval_wait(), thus we bail out and release the socket via sk_common_release(), sctp_destroy_sock() and hit the NULL pointer dereference as soon as we try to access members in the endpoint during sctp_endpoint_free(), since endpoint at that time is still NULL. Now, if we have that case, we do not need to do any cleanup work and just leave the destruction handler. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31sctp: Correct byte order of access to skb->{network, transport}_headerSimon Horman1-1/+1
Corrects an byte order conflict introduced by "sctp: Correct access to skb->{network, transport}_header". All the values in question are host byte order. Reported-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-29sctp: Correct access to skb->{network, transport}_headerSimon Horman2-2/+2
This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case sk_buff_data_t will be a pointer, however, skb->{network,transport}_header is now __u16. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds12-66/+39
Pull networking updates from David Miller: "Highlights (1721 non-merge commits, this has to be a record of some sort): 1) Add 'random' mode to team driver, from Jiri Pirko and Eric Dumazet. 2) Make it so that any driver that supports configuration of multiple MAC addresses can provide the forwarding database add and del calls by providing a default implementation and hooking that up if the driver doesn't have an explicit set of handlers. From Vlad Yasevich. 3) Support GSO segmentation over tunnels and other encapsulating devices such as VXLAN, from Pravin B Shelar. 4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton. 5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita Dukkipati. 6) In the PHY layer, allow supporting wake-on-lan in situations where the PHY registers have to be written for it to be configured. Use it to support wake-on-lan in mv643xx_eth. From Michael Stapelberg. 7) Significantly improve firewire IPV6 support, from YOSHIFUJI Hideaki. 8) Allow multiple packets to be sent in a single transmission using network coding in batman-adv, from Martin Hundebøll. 9) Add support for T5 cxgb4 chips, from Santosh Rastapur. 10) Generalize the VXLAN forwarding tables so that there is more flexibility in configurating various aspects of the endpoints. From David Stevens. 11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver, from Dmitry Kravkov. 12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo Neira Ayuso. 13) Start adding networking selftests. 14) In situations of overload on the same AF_PACKET fanout socket, or per-cpu packet receive queue, minimize drop by distributing the load to other cpus/fanouts. From Willem de Bruijn and Eric Dumazet. 15) Add support for new payload offset BPF instruction, from Daniel Borkmann. 16) Convert several drivers over to mdoule_platform_driver(), from Sachin Kamat. 17) Provide a minimal BPF JIT image disassembler userspace tool, from Daniel Borkmann. 18) Rewrite F-RTO implementation in TCP to match the final specification of it in RFC4138 and RFC5682. From Yuchung Cheng. 19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear you like netlink, so I implemented netlink dumping of netlink sockets.") From Andrey Vagin. 20) Remove ugly passing of rtnetlink attributes into rtnl_doit functions, from Thomas Graf. 21) Allow userspace to be able to see if a configuration change occurs in the middle of an address or device list dump, from Nicolas Dichtel. 22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes Frederic Sowa. 23) Increase accuracy of packet length used by packet scheduler, from Jason Wang. 24) Beginning set of changes to make ipv4/ipv6 fragment handling more scalable and less susceptible to overload and locking contention, from Jesper Dangaard Brouer. 25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*() instead. From Hong Zhiguo. 26) Optimize route usage in IPVS by avoiding reference counting where possible, from Julian Anastasov. 27) Convert IPVS schedulers to RCU, also from Julian Anastasov. 28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger Eitzenberger. 29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG, nfnetlink_log, and nfnetlink_queue. From Gao feng. 30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa. 31) Support several new r8169 chips, from Hayes Wang. 32) Support tokenized interface identifiers in ipv6, from Daniel Borkmann. 33) Use usbnet_link_change() helper in USB net driver, from Ming Lei. 34) Add 802.1ad vlan offload support, from Patrick McHardy. 35) Support mmap() based netlink communication, also from Patrick McHardy. 36) Support HW timestamping in mlx4 driver, from Amir Vadai. 37) Rationalize AF_PACKET packet timestamping when transmitting, from Willem de Bruijn and Daniel Borkmann. 38) Bring parity to what's provided by /proc/net/packet socket dumping and the info provided by netlink socket dumping of AF_PACKET sockets. From Nicolas Dichtel. 39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin Poirier" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) filter: fix va_list build error af_unix: fix a fatal race with bit fields bnx2x: Prevent memory leak when cnic is absent bnx2x: correct reading of speed capabilities net: sctp: attribute printl with __printf for gcc fmt checks netlink: kconfig: move mmap i/o into netlink kconfig netpoll: convert mutex into a semaphore netlink: Fix skb ref counting. net_sched: act_ipt forward compat with xtables mlx4_en: fix a build error on 32bit arches Revert "bnx2x: allow nvram test to run when device is down" bridge: avoid OOPS if root port not found drivers: net: cpsw: fix kernel warn on cpsw irq enable sh_eth: use random MAC address if no valid one supplied 3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA) tg3: fix to append hardware time stamping flags unix/stream: fix peeking with an offset larger than data in queue unix/dgram: fix peeking with an offset larger than data in queue unix/dgram: peek beyond 0-sized skbs openvswitch: Remove unneeded ovs_netdev_get_ifindex() ...
2013-05-01net: sctp: attribute printl with __printf for gcc fmt checksDaniel Borkmann1-1/+1
Let GCC check for format string errors in sctp's probe printl function. This patch fixes the warning when compiled with W=1: net/sctp/probe.c:73:2: warning: function might be possible candidate for 'gnu_printf' format attribute [-Wmissing-format-attribute] Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual stuff, mostly comment fixes, typo fixes, printk fixes and small code cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits) mm: Convert print_symbol to %pSR gfs2: Convert print_symbol to %pSR m32r: Convert print_symbol to %pSR iostats.txt: add easy-to-find description for field 6 x86 cmpxchg.h: fix wrong comment treewide: Fix typo in printk and comments doc: devicetree: Fix various typos docbook: fix 8250 naming in device-drivers pata_pdc2027x: Fix compiler warning treewide: Fix typo in printks mei: Fix comments in drivers/misc/mei treewide: Fix typos in kernel messages pm44xx: Fix comment for "CONFIG_CPU_IDLE" doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP" mmzone: correct "pags" to "pages" in comment. kernel-parameters: remove outdated 'noresidual' parameter Remove spurious _H suffixes from ifdef comments sound: Remove stray pluses from Kconfig file radio-shark: Fix printk "CONFIG_LED_CLASS" doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE ...
2013-04-30sctp: convert sctp_assoc_set_id() to use idr_alloc_cyclic()Jeff Layton1-14/+2
Signed-off-by: Jeff Layton <jlayton@redhat.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-23net: sctp: minor: remove dead code from sctp_packetDaniel Borkmann1-4/+1
struct sctp_packet is currently embedded into sctp_transport or sits on the stack as 'singleton' in sctp_outq_flush(). Therefore, its member 'malloced' is always 0, thus a kfree() is never called. Because of that, we can just remove this code. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-17net: sctp: sctp_ulpq: remove 'malloced' struct memberDaniel Borkmann1-3/+0
The structure sctp_ulpq is embedded into sctp_association and never separately allocated, also ulpq->malloced is always 0, so that kfree() is never called. Therefore, remove this code. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-17net: sctp: sctp_bind_addr: remove dead codeDaniel Borkmann1-7/+0
The sctp_bind_addr structure has a 'malloced' member that is always set to 0, thus in sctp_bind_addr_free() the kfree() part can never be called. This part is embedded into sctp_ep_common anyway and never alloced. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>