summaryrefslogtreecommitdiff
path: root/net/openvswitch
AgeCommit message (Collapse)AuthorFilesLines
2015-09-30openvswitch: Zero flows on allocation.Jesse Gross3-11/+14
[ Upstream commit ae5f2fb1d51fa128a460bcfbe3c56d7ab8bf6a43 ] When support for megaflows was introduced, OVS needed to start installing flows with a mask applied to them. Since masking is an expensive operation, OVS also had an optimization that would only take the parts of the flow keys that were covered by a non-zero mask. The values stored in the remaining pieces should not matter because they are masked out. While this works fine for the purposes of matching (which must always look at the mask), serialization to netlink can be problematic. Since the flow and the mask are serialized separately, the uninitialized portions of the flow can be encoded with whatever values happen to be present. In terms of functionality, this has little effect since these fields will be masked out by definition. However, it leaks kernel memory to userspace, which is a potential security vulnerability. It is also possible that other code paths could look at the masked key and get uninitialized data, although this does not currently appear to be an issue in practice. This removes the mask optimization for flows that are being installed. This was always intended to be the case as the mask optimizations were really targetting per-packet flow operations. Fixes: 03f0d916 ("openvswitch: Mega flow implementation") Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-10-17openvswitch: fix panic with multiple vlan headersJiri Benc1-0/+5
[ Upstream commit 2ba5af42a7b59ef01f9081234d8855140738defd ] When there are multiple vlan headers present in a received frame, the first one is put into vlan_tci and protocol is set to ETH_P_8021Q. Anything in the skb beyond the VLAN TPID may be still non-linear, including the inner TCI and ethertype. While ovs_flow_extract takes care of IP and IPv6 headers, it does nothing with ETH_P_8021Q. Later, if OVS_ACTION_ATTR_POP_VLAN is executed, __pop_vlan_tci pulls the next vlan header into vlan_tci. This leads to two things: 1. Part of the resulting ethernet header is in the non-linear part of the skb. When eth_type_trans is called later as the result of OVS_ACTION_ATTR_OUTPUT, kernel BUGs in __skb_pull. Also, __pop_vlan_tci is in fact accessing random data when it reads past the TPID. 2. network_header points into the ethernet header instead of behind it. mac_len is set to a wrong value (10), too. Reported-by: Yulong Pei <ypei@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-04-25openvswitch: fix vport-netdev unregisterAlexei Starovoitov3-5/+19
commit b07c26511e94ab856f3700c56d582c0da36d5b4d upstream. The combination of two commits: commit 8e4e1713e4 ("openvswitch: Simplify datapath locking.") commit 2537b4dd0a ("openvswitch:: link upper device for port devices") introduced a bug where upper_dev wasn't unlinked upon netdev_unregister notification The following steps: modprobe openvswitch ovs-dpctl add-dp test ip tuntap add dev tap1 mode tap ovs-dpctl add-if test tap1 ip tuntap del dev tap1 mode tap are causing multiple warnings: [ 62.747557] gre: GRE over IPv4 demultiplexor driver [ 62.749579] openvswitch: Open vSwitch switching datapath [ 62.755087] device test entered promiscuous mode [ 62.765911] device tap1 entered promiscuous mode [ 62.766033] IPv6: ADDRCONF(NETDEV_UP): tap1: link is not ready [ 62.769017] ------------[ cut here ]------------ [ 62.769022] WARNING: CPU: 1 PID: 3267 at net/core/dev.c:5501 rollback_registered_many+0x20f/0x240() [ 62.769023] Modules linked in: openvswitch gre vxlan ip_tunnel libcrc32c ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_CHECKSUM iptable_mangle ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc vhost_net macvtap macvlan vhost kvm_intel kvm dm_crypt iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi hid_generic mxm_wmi eeepc_wmi asus_wmi sparse_keymap dm_multipath psmouse serio_raw usbhid hid parport_pc ppdev firewire_ohci lpc_ich firewire_core e1000e crc_itu_t binfmt_misc igb dca ptp pps_core mac_hid wmi lp parport i2o_config i2o_block video [ 62.769051] CPU: 1 PID: 3267 Comm: ip Not tainted 3.12.0-rc3+ #60 [ 62.769052] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012 [ 62.769053] 0000000000000009 ffff8807f25cbd28 ffffffff8175e575 0000000000000006 [ 62.769055] 0000000000000000 ffff8807f25cbd68 ffffffff8105314c ffff8807f25cbd58 [ 62.769057] ffff8807f2634000 ffff8807f25cbdc8 ffff8807f25cbd88 ffff8807f25cbdc8 [ 62.769059] Call Trace: [ 62.769062] [<ffffffff8175e575>] dump_stack+0x55/0x76 [ 62.769065] [<ffffffff8105314c>] warn_slowpath_common+0x8c/0xc0 [ 62.769067] [<ffffffff8105319a>] warn_slowpath_null+0x1a/0x20 [ 62.769069] [<ffffffff8162a04f>] rollback_registered_many+0x20f/0x240 [ 62.769071] [<ffffffff8162a101>] rollback_registered+0x31/0x40 [ 62.769073] [<ffffffff8162a488>] unregister_netdevice_queue+0x58/0x90 [ 62.769075] [<ffffffff8154f900>] __tun_detach+0x140/0x340 [ 62.769077] [<ffffffff8154fb36>] tun_chr_close+0x36/0x60 [ 62.769080] [<ffffffff811bddaf>] __fput+0xff/0x260 [ 62.769082] [<ffffffff811bdf5e>] ____fput+0xe/0x10 [ 62.769084] [<ffffffff8107b515>] task_work_run+0xb5/0xe0 [ 62.769087] [<ffffffff810029b9>] do_notify_resume+0x59/0x80 [ 62.769089] [<ffffffff813a41fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 62.769091] [<ffffffff81770f5a>] int_signal+0x12/0x17 [ 62.769093] ---[ end trace 838756c62e156ffb ]--- [ 62.769481] ------------[ cut here ]------------ [ 62.769485] WARNING: CPU: 1 PID: 92 at fs/sysfs/inode.c:325 sysfs_hash_and_remove+0xa9/0xb0() [ 62.769486] sysfs: can not remove 'master', no directory [ 62.769486] Modules linked in: openvswitch gre vxlan ip_tunnel libcrc32c ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_CHECKSUM iptable_mangle ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc vhost_net macvtap macvlan vhost kvm_intel kvm dm_crypt iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi hid_generic mxm_wmi eeepc_wmi asus_wmi sparse_keymap dm_multipath psmouse serio_raw usbhid hid parport_pc ppdev firewire_ohci lpc_ich firewire_core e1000e crc_itu_t binfmt_misc igb dca ptp pps_core mac_hid wmi lp parport i2o_config i2o_block video [ 62.769514] CPU: 1 PID: 92 Comm: kworker/1:2 Tainted: G W 3.12.0-rc3+ #60 [ 62.769515] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012 [ 62.769518] Workqueue: events ovs_dp_notify_wq [openvswitch] [ 62.769519] 0000000000000009 ffff880807ad3ac8 ffffffff8175e575 0000000000000006 [ 62.769521] ffff880807ad3b18 ffff880807ad3b08 ffffffff8105314c ffff880807ad3b28 [ 62.769523] 0000000000000000 ffffffff81a87a1f ffff8807f2634000 ffff880037038500 [ 62.769525] Call Trace: [ 62.769528] [<ffffffff8175e575>] dump_stack+0x55/0x76 [ 62.769529] [<ffffffff8105314c>] warn_slowpath_common+0x8c/0xc0 [ 62.769531] [<ffffffff81053236>] warn_slowpath_fmt+0x46/0x50 [ 62.769533] [<ffffffff8123e7e9>] sysfs_hash_and_remove+0xa9/0xb0 [ 62.769535] [<ffffffff81240e96>] sysfs_remove_link+0x26/0x30 [ 62.769538] [<ffffffff81631ef7>] __netdev_adjacent_dev_remove+0xf7/0x150 [ 62.769540] [<ffffffff81632037>] __netdev_adjacent_dev_unlink_lists+0x27/0x50 [ 62.769542] [<ffffffff8163213a>] __netdev_adjacent_dev_unlink_neighbour+0x3a/0x50 [ 62.769544] [<ffffffff8163218d>] netdev_upper_dev_unlink+0x3d/0x140 [ 62.769548] [<ffffffffa033c2db>] netdev_destroy+0x4b/0x80 [openvswitch] [ 62.769550] [<ffffffffa033b696>] ovs_vport_del+0x46/0x60 [openvswitch] [ 62.769552] [<ffffffffa0335314>] ovs_dp_detach_port+0x44/0x60 [openvswitch] [ 62.769555] [<ffffffffa0336574>] ovs_dp_notify_wq+0xb4/0x150 [openvswitch] [ 62.769557] [<ffffffff81075c28>] process_one_work+0x1d8/0x6a0 [ 62.769559] [<ffffffff81075bc8>] ? process_one_work+0x178/0x6a0 [ 62.769562] [<ffffffff8107659b>] worker_thread+0x11b/0x370 [ 62.769564] [<ffffffff81076480>] ? rescuer_thread+0x350/0x350 [ 62.769566] [<ffffffff8107f44a>] kthread+0xea/0xf0 [ 62.769568] [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150 [ 62.769570] [<ffffffff81770bac>] ret_from_fork+0x7c/0xb0 [ 62.769572] [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150 [ 62.769573] ---[ end trace 838756c62e156ffc ]--- [ 62.769574] ------------[ cut here ]------------ [ 62.769576] WARNING: CPU: 1 PID: 92 at fs/sysfs/inode.c:325 sysfs_hash_and_remove+0xa9/0xb0() [ 62.769577] sysfs: can not remove 'upper_test', no directory [ 62.769577] Modules linked in: openvswitch gre vxlan ip_tunnel libcrc32c ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_CHECKSUM iptable_mangle ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc vhost_net macvtap macvlan vhost kvm_intel kvm dm_crypt iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi hid_generic mxm_wmi eeepc_wmi asus_wmi sparse_keymap dm_multipath psmouse serio_raw usbhid hid parport_pc ppdev firewire_ohci lpc_ich firewire_core e1000e crc_itu_t binfmt_misc igb dca ptp pps_core mac_hid wmi lp parport i2o_config i2o_block video [ 62.769603] CPU: 1 PID: 92 Comm: kworker/1:2 Tainted: G W 3.12.0-rc3+ #60 [ 62.769604] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012 [ 62.769606] Workqueue: events ovs_dp_notify_wq [openvswitch] [ 62.769607] 0000000000000009 ffff880807ad3ac8 ffffffff8175e575 0000000000000006 [ 62.769609] ffff880807ad3b18 ffff880807ad3b08 ffffffff8105314c ffff880807ad3b58 [ 62.769611] 0000000000000000 ffff880807ad3bd9 ffff8807f2634000 ffff880037038500 [ 62.769613] Call Trace: [ 62.769615] [<ffffffff8175e575>] dump_stack+0x55/0x76 [ 62.769617] [<ffffffff8105314c>] warn_slowpath_common+0x8c/0xc0 [ 62.769619] [<ffffffff81053236>] warn_slowpath_fmt+0x46/0x50 [ 62.769621] [<ffffffff8123e7e9>] sysfs_hash_and_remove+0xa9/0xb0 [ 62.769622] [<ffffffff81240e96>] sysfs_remove_link+0x26/0x30 [ 62.769624] [<ffffffff81631f22>] __netdev_adjacent_dev_remove+0x122/0x150 [ 62.769627] [<ffffffff81632037>] __netdev_adjacent_dev_unlink_lists+0x27/0x50 [ 62.769629] [<ffffffff8163213a>] __netdev_adjacent_dev_unlink_neighbour+0x3a/0x50 [ 62.769631] [<ffffffff8163218d>] netdev_upper_dev_unlink+0x3d/0x140 [ 62.769633] [<ffffffffa033c2db>] netdev_destroy+0x4b/0x80 [openvswitch] [ 62.769636] [<ffffffffa033b696>] ovs_vport_del+0x46/0x60 [openvswitch] [ 62.769638] [<ffffffffa0335314>] ovs_dp_detach_port+0x44/0x60 [openvswitch] [ 62.769640] [<ffffffffa0336574>] ovs_dp_notify_wq+0xb4/0x150 [openvswitch] [ 62.769642] [<ffffffff81075c28>] process_one_work+0x1d8/0x6a0 [ 62.769644] [<ffffffff81075bc8>] ? process_one_work+0x178/0x6a0 [ 62.769646] [<ffffffff8107659b>] worker_thread+0x11b/0x370 [ 62.769648] [<ffffffff81076480>] ? rescuer_thread+0x350/0x350 [ 62.769650] [<ffffffff8107f44a>] kthread+0xea/0xf0 [ 62.769652] [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150 [ 62.769654] [<ffffffff81770bac>] ret_from_fork+0x7c/0xb0 [ 62.769656] [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150 [ 62.769657] ---[ end trace 838756c62e156ffd ]--- [ 62.769724] device tap1 left promiscuous mode This patch also affects moving devices between net namespaces. OVS used to ignore netns move notifications which caused problems. Like: ovs-dpctl add-if test tap1 ip link set tap1 netns 3512 and then removing tap1 inside the namespace will cause hang on missing dev_put. With this patch OVS will detach dev upon receiving netns move event. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2013-09-12net: ovs: flow: fix potential illegal memory access in __parse_flow_nlattrsDaniel Borkmann1-0/+1
In function __parse_flow_nlattrs(), we check for condition (type > OVS_KEY_ATTR_MAX) and if true, print an error, but we do not return from this function as in other checks. It seems this has been forgotten, as otherwise, we could access beyond the memory of ovs_key_lens, which is of ovs_key_lens[OVS_KEY_ATTR_MAX + 1]. Hence, a maliciously prepared nla_type from user space could access beyond this upper limit. Introduced by 03f0d916a ("openvswitch: Mega flow implementation"). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Andy Zhou <azhou@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05openvswitch: Fix alignment of struct sw_flow_key.Jesse Gross2-1/+2
sw_flow_key alignment was declared as " __aligned(__alignof__(long))". However, this breaks on the m68k architecture where long is 32 bit in size but 16 bit aligned by default. This aligns to the size of a long to ensure that we can always do comparsions in full long-sized chunks. It also adds an additional build check to catch any reduction in alignment. CC: Andy Zhou <azhou@nicira.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04tunnels: harmonize cleanup done on skb on xmit pathNicolas Dichtel1-1/+1
The goal of this patch is to harmonize cleanup done on a skbuff on xmit path. Before this patch, behaviors were different depending of the tunnel type. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04vxlan: remove net arg from vxlan[6]_xmit_skb()Nicolas Dichtel1-1/+1
This argument is not used, let's remove it. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04iptunnels: remove net arg from iptunnel_xmit()Nicolas Dichtel1-1/+1
This argument is not used, let's remove it. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-01vxlan: add ipv6 supportCong Wang1-1/+1
This patch adds IPv6 support to vxlan device, as the new version RFC already mentions it: http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-03 Cc: David Stevens <dlstevens@us.ibm.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28openvswitch: optimize flow compare and mask functionsAndy Zhou2-39/+44
Make sure the sw_flow_key structure and valid mask boundaries are always machine word aligned. Optimize the flow compare and mask operations using machine word size operations. This patch improves throughput on average by 15% when CPU is the bottleneck of forwarding packets. This patch is inspired by ideas and code from a patch submitted by Peter Klausler titled "replace memcmp() with specialized comparator". However, The original patch only optimizes for architectures support unaligned machine word access. This patch optimizes for all architectures. Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-27openvswitch: Rename key_len to key_endAndy Zhou2-16/+17
Key_end is a better name describing the ending boundary than key_len. Rename those variables to make it less confusing. Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-27openvswitch: Add SCTP supportJoe Stringer5-4/+115
This patch adds support for rewriting SCTP src,dst ports similar to the functionality already available for TCP/UDP. Rewriting SCTP ports is expensive due to double-recalculation of the SCTP checksums; this is performed to ensure that packets traversing OVS with invalid checksums will continue to the destination with any checksum corruption intact. Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Joe Stringer <joe@wand.net.nz> Signed-off-by: Ben Pfaff <blp@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-24openvswitch: Mega flow implementationAndy Zhou5-512/+1123
Add wildcarded flow support in kernel datapath. Wildcarded flow can improve OVS flow set up performance by avoid sending matching new flows to the user space program. The exact performance boost will largely dependent on wildcarded flow hit rate. In case all new flows hits wildcard flows, the flow set up rate is within 5% of that of linux bridge module. Pravin has made significant contributions to this patch. Including API clean ups and bug fixes. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-24openvswitch: check CONFIG_OPENVSWITCH_GRE in makefileCong Wang2-4/+4
Cc: Jesse Gross <jesse@nicira.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-24openvswitch: Fix argument descriptions in vport.c.Justin Pettit1-1/+2
Signed-off-by: Justin Pettit <jpettit@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-24openvswitch:: link upper device for port devicesJiri Pirko1-1/+19
Link upper device properly. That will make IFLA_MASTER filled up. Set the master to port 0 of the datapath under which the port belongs. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-24openvswitch: Use non rcu hlist_del() flow table entry.Pravin B Shelar1-1/+1
Flow table destroy is done in rcu call-back context. Therefore there is no need to use rcu variant of hlist_del(). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-24openvswitch: Use RCU lock for dp dump operation.Pravin B Shelar1-6/+7
RCUfy dp-dump operation which is already read-only. This makes all ovs dump operations lockless. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-24openvswitch: Use RCU lock for flow dump operation.Pravin B Shelar1-8/+9
Flow dump operation is read-only operation. There is no need to take ovs-lock. Following patch use rcu-lock for dumping flows. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-20openvswitch: Add vxlan tunneling support.Pravin B Shelar5-0/+225
Following patch adds vxlan vport type for openvswitch using vxlan api. So now there is vxlan dependency for openvswitch. CC: Jesse Gross <jesse@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-15openvswitch: Reset tunnel key between input and output.Jesse Gross1-0/+1
It doesn't make sense to output a tunnel packet using the same parameters that it was received with since that will generally just result in the packet going back to us. As a result, userspace assumes that the tunnel key is cleared when transitioning through the switch. In the majority of cases this doesn't matter since a packet is either going to a tunnel port (in which the key is overwritten with new values) or to a non-tunnel port (in which case the key is ignored). However, it's theoreticaly possible that userspace could rely on the documented behavior, so this corrects it. Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-15openvswitch: Use correct type while allocating flex array.Pravin B Shelar1-1/+1
Flex array is used to allocate hash buckets which is type struct hlist_head, but we use `struct hlist_head *` to calculate array size. Since hlist_head is of size pointer it works fine. Following patch use correct type. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-15openvswitch: Fix bad merge resolution.Jesse Gross1-3/+0
git silently included an extra hunk in vport_cmd_set() during automatic merging. This code is unreachable so it does not actually introduce a problem but it is clearly incorrect. Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-07-02openvswitch: Add Kconfig dependency on GRE-DEMUX.Pravin B Shelar3-5/+18
Openvswitch uses function from NET_IPGRE_DEMUX module. Add Kconfig dependency to fix following compilation errors: http://marc.info/?l=linux-netdev&m=137244035226634 CC: Jesse Gross <jesse@nicira.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Pravin Shelar <pshelar@nicira.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24openvswitch: Use correct config guard.Pravin B Shelar2-2/+2
This bug was introduced by commit aa310701e787087 (openvswitch: Add gre tunnel support.) Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-20openvswitch: Add gre tunnel support.Pravin B Shelar7-2/+322
Add gre vport implementation. Most of gre protocol processing is pushed to gre module. It make use of gre demultiplexer therefore it can co-exist with linux device based gre tunnels. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-20openvswitch: Optimize flow key match for non tunnel flows.Pravin B Shelar3-20/+42
Following patch adds start offset for sw_flow-key, so that we can skip tunneling information in key for non-tunnel flows. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-20openvswitch: Expand action buffer size.Pravin B Shelar1-1/+1
MAX_ACTIONS_BUFSIZE limits action list size, set tunnel action needs extra space on action list, for now increase max actions list limit. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-20openvswitch: Add tunneling interface.Pravin B Shelar9-7/+233
Add ovs tunnel interface for set tunnel action for userspace. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-20openvswitch: Copy individual actions.Pravin B Shelar3-58/+225
Rather than validating actions and then copying all actiaons in one block, following patch does same operation in single pass. This validate and copy action one by one. This is required for ovs tunneling patch. This patch does not change any functionality. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-15Merge branch 'master' of ↵David S. Miller9-36/+51
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch Jesse Gross says: ==================== A few miscellaneous improvements and cleanups before the GRE tunnel integration series. Intended for net-next/3.11. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-15openvswitch: Simplify interface ovs_flow_metadata_from_nlattrs()Pravin B Shelar3-18/+13
This is not functional change, this is just code cleanup. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-06-15openvswitch: make skb->csum consistent with rest of networking stack.Pravin B Shelar5-0/+17
Following patch keeps skb->csum correct across ovs. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-06-15openvswitch: Fix misspellings in comments and docs.Andy Hill1-1/+1
Flagged with: https://github.com/lyda/misspell-check Run with: git ls-files | misspellings -f - Signed-off-by: Andy Hill <hillad@gmail.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-06-15openvswitch: fix variable names in commentLorand Jakab1-2/+2
Signed-off-by: Lorand Jakab <lojakab@cisco.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-06-15openvswitch: Unify vport error stats handling.Pravin B Shelar3-6/+11
Following patch changes vport->send return type so that vport layer can do error accounting. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-06-15openvswitch: Remove unused get_config vport op.Jesse Gross2-4/+0
The get_config vport op is left over from old compatibility code, it is neither used nor implemented any more. Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-06-15openvswitch: Immediately exit on error in ovs_vport_cmd_set().Jesse Gross1-5/+7
It is an error to try to change the type of a vport using the set command. However, while we check that this is an error, we still proceed to allocate memory which then gets freed immediately. This stops processing after noticing the error, which does not actually fix a bug but is more correct. Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-05-29net: pass info struct via netdevice notifierJiri Pirko1-1/+1
So far, only net_device * could be passed along with netdevice notifier event. This patch provides a possibility to pass custom structure able to provide info that event listener needs to know. Signed-off-by: Jiri Pirko <jiri@resnulli.us> v2->v3: fix typo on simeth shortened dev_getter shortened notifier_info struct name v1->v2: fix notifier_call parameter in call_netdevice_notifier() Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30openvswitch: Remove unneeded ovs_netdev_get_ifindex()Thomas Graf5-12/+2
The only user is get_dpifindex(), no need to redirect via the port operations. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-25openvswitch: Use parallel_ops genl.Pravin B Shelar1-4/+8
OVS locking was recently changed to have private OVS lock which simplified overall locking. Therefore there is no need to have another global genl lock to protect OVS data structures. Following patch uses of parallel_ops genl family for OVS. This also allows more granual OVS locking using ovs_mutex for protecting OVS data structures, which gives more concurrencey. E.g multiple genl operations OVS_PACKET_CMD_EXECUTE can run in parallel, etc. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-13/+19
Conflicts: drivers/net/ethernet/emulex/benet/be_main.c drivers/net/ethernet/intel/igb/igb_main.c drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c include/net/scm.h net/batman-adv/routing.c net/ipv4/tcp_input.c The e{uid,gid} --> {uid,gid} credentials fix conflicted with the cleanup in net-next to now pass cred structs around. The be2net driver had a bug fix in 'net' that overlapped with the VLAN interface changes by Patrick McHardy in net-next. An IGB conflict existed because in 'net' the build_skb() support was reverted, and in 'net-next' there was a comment style fix within that code. Several batman-adv conflicts were resolved by making sure that all calls to batadv_is_my_mac() are changed to have a new bat_priv first argument. Eric Dumazet's TS ECR fix in TCP in 'net' conflicted with the F-RTO rewrite in 'net-next', mostly overlapping changes. Thanks to Stephen Rothwell and Antonio Quartulli for help with several of these merge resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: add protocol argument to packet tagging functionsPatrick McHardy2-4/+4
Add a protocol argument to the VLAN packet tagging functions. In case of HW tagging, we need that protocol available in the ndo_start_xmit functions, so it is stored in a new field in the skb. The new field fits into a hole (on 64 bit) and doesn't increase the sks's size. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy1-1/+1
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-16openvswitch: Use generic struct pcpu_tstats.Pravin B Shelar2-20/+13
Rather than defining ovs specific stats struct (vport_percpu_stats), we can use existing pcpu_tstats to achieve exactly same functionality. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-04-16openvswitch: Simplify datapath locking.Pravin B Shelar7-167/+298
Currently OVS uses combination of genl and rtnl lock to protect datapath state. This was done due to networking stack locking. But this has complicated locking and there are few lock ordering issues with new tunneling protocols. Following patch simplifies locking by introducing new ovs mutex and now this lock is used to protect entire ovs state. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-04-11openvswitch: datapath.h: Fix a stale comment.Andy Zhou1-1/+0
Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-04-03openvswitch: Don't insert empty OVS_VPORT_ATTR_OPTIONS attributeThomas Graf1-6/+8
The port specific options are currently unused resulting in an empty OVS_VPORT_ATTR_OPTIONS nested attribute being inserted into every OVS_VPORT_CMD_GET message. Don't insert OVS_VPORT_ATTR_OPTIONS if no options are present. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-03-30openvswitch: Move common genl notify code into ovs_notify()Thomas Graf1-20/+16
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-03-30openvswitch: Refine Netlink message size calculation and kill FLOW_BUFSIZEThomas Graf2-45/+52
Kills the FLOW_BUFSIZE constant which needs to be calculated manually and replaces it with key_attr_size() based on nla_total_size(). Calculates the size of datapath messages instead of relying on NLMSG_DEFAULT_SIZE and moves the existing message size calculations into own functions for clarity. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jesse Gross <jesse@nicira.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 15:11:58 +0300