summaryrefslogtreecommitdiff
path: root/net/mptcp
AgeCommit message (Collapse)AuthorFilesLines
2020-12-15mptcp: use MPTCPOPT_HMAC_LEN macroGeliang Tang1-1/+1
Use the macro MPTCPOPT_HMAC_LEN instead of a constant in struct mptcp_options_received. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-15mptcp: remove address when netlink flushes addrsGeliang Tang1-5/+10
When the PM netlink flushes the addresses, invoke the remove address function mptcp_nl_remove_subflow_and_signal_addr to remove the addresses and the subflows. Since this function should not be invoked under lock, move __flush_addrs out of the pernet->lock. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-15mptcp: attach subflow socket to parent cgroupNicolas Rybowski1-0/+27
It has been observed that the kernel sockets created for the subflows (except the first one) are not in the same cgroup as their parents. That's because the additional subflows are created by kernel workers. This is a problem with eBPF programs attached to the parent's cgroup won't be executed for the children. But also with any other features of CGroup linked to a sk. This patch fixes this behaviour. As the subflow sockets are created by the kernel, we can't use 'mem_cgroup_sk_alloc' because of the current context being the one of the kworker. This is why we have to do low level memcg manipulation, if required. Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Suggested-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Nicolas Rybowski <nicolas.rybowski@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14Merge branch 'linus' of ↵Linus Torvalds3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add speed testing on 1420-byte blocks for networking Algorithms: - Improve performance of chacha on ARM for network packets - Improve performance of aegis128 on ARM for network packets Drivers: - Add support for Keem Bay OCS AES/SM4 - Add support for QAT 4xxx devices - Enable crypto-engine retry mechanism in caam - Enable support for crypto engine on sdm845 in qce - Add HiSilicon PRNG driver support" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits) crypto: qat - add capability detection logic in qat_4xxx crypto: qat - add AES-XTS support for QAT GEN4 devices crypto: qat - add AES-CTR support for QAT GEN4 devices crypto: atmel-i2c - select CONFIG_BITREVERSE crypto: hisilicon/trng - replace atomic_add_return() crypto: keembay - Add support for Keem Bay OCS AES/SM4 dt-bindings: Add Keem Bay OCS AES bindings crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd crypto: seed - remove trailing semicolon in macro definition crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg crypto: cpt - Fix sparse warnings in cptpf hwrng: ks-sa - Add dependency on IOMEM and OF crypto: lib/blake2s - Move selftest prototype into header file crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata crypto: ecdh - avoid unaligned accesses in ecdh_set_secret() crypto: ccree - rework cache parameters handling crypto: cavium - Use dma_set_mask_and_coherent to simplify code crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code ...
2020-12-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-10mptcp: be careful on subflows shutdownPaolo Abeni1-2/+10
When the workqueue disposes of the msk, the subflows can still receive some data from the peer after __mptcp_close_ssk() completes. The above could trigger a race between the msk receive path and the msk destruction. Acquiring the mptcp_data_lock() in __mptcp_destroy_sock() will not save the day: the rx path could be reached even after msk destruction completes. Instead use the subflow 'disposable' flag to prevent entering the msk receive path after __mptcp_close_ssk(). Fixes: e16163b6e2b7 ("mptcp: refactor shutdown and close") Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10mptcp: plug subflow context memory leakPaolo Abeni1-2/+3
When a MPTCP listener socket is closed with unaccepted children pending, the ULP release callback will be invoked, but nobody will call into __mptcp_close_ssk() on the corresponding subflow. As a consequence, at ULP release time, the 'disposable' flag will be cleared and the subflow context memory will be leaked. This change addresses the issue always freeing the context if the subflow is still in the accept queue at ULP release time. Additionally, this fixes an incorrect code reference in the related comment. Note: this fix leverages the changes introduced by the previous commit. Fixes: e16163b6e2b7 ("mptcp: refactor shutdown and close") Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10mptcp: link MPC subflow into msk only after acceptPaolo Abeni5-6/+35
Christoph reported the following splat: WARNING: CPU: 0 PID: 4615 at net/ipv4/inet_connection_sock.c:1031 inet_csk_listen_stop+0x8e8/0xad0 net/ipv4/inet_connection_sock.c:1031 Modules linked in: CPU: 0 PID: 4615 Comm: syz-executor.4 Not tainted 5.9.0 #37 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:inet_csk_listen_stop+0x8e8/0xad0 net/ipv4/inet_connection_sock.c:1031 Code: 03 00 00 00 e8 79 b2 3d ff e9 ad f9 ff ff e8 1f 76 ba fe be 02 00 00 00 4c 89 f7 e8 62 b2 3d ff e9 14 f9 ff ff e8 08 76 ba fe <0f> 0b e9 97 f8 ff ff e8 fc 75 ba fe be 03 00 00 00 4c 89 f7 e8 3f RSP: 0018:ffffc900037f7948 EFLAGS: 00010293 RAX: ffff88810a349c80 RBX: ffff888114ee1b00 RCX: ffffffff827b14cd RDX: 0000000000000000 RSI: ffffffff827b1c38 RDI: 0000000000000005 RBP: ffff88810a2a8000 R08: ffff88810a349c80 R09: fffff520006fef1f R10: 0000000000000003 R11: fffff520006fef1e R12: ffff888114ee2d00 R13: dffffc0000000000 R14: 0000000000000001 R15: ffff888114ee1d68 FS: 00007f2ac1945700(0000) GS:ffff88811b400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd44798bc0 CR3: 0000000109810002 CR4: 0000000000170ef0 Call Trace: __tcp_close+0xd86/0x1110 net/ipv4/tcp.c:2433 __mptcp_close_ssk+0x256/0x430 net/mptcp/protocol.c:1761 __mptcp_destroy_sock+0x49b/0x770 net/mptcp/protocol.c:2127 mptcp_close+0x62d/0x910 net/mptcp/protocol.c:2184 inet_release+0xe9/0x1f0 net/ipv4/af_inet.c:434 __sock_release+0xd2/0x280 net/socket.c:596 sock_close+0x15/0x20 net/socket.c:1277 __fput+0x276/0x960 fs/file_table.c:281 task_work_run+0x109/0x1d0 kernel/task_work.c:151 get_signal+0xe8f/0x1d40 kernel/signal.c:2561 arch_do_signal+0x88/0x1b60 arch/x86/kernel/signal.c:811 exit_to_user_mode_loop kernel/entry/common.c:161 [inline] exit_to_user_mode_prepare+0x9b/0xf0 kernel/entry/common.c:191 syscall_exit_to_user_mode+0x22/0x150 kernel/entry/common.c:266 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f2ac1254469 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ff 49 2b 00 f7 d8 64 89 01 48 RSP: 002b:00007f2ac1944dc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffbf RBX: 000000000069bf00 RCX: 00007f2ac1254469 RDX: 0000000000000000 RSI: 0000000000008982 RDI: 0000000000000003 RBP: 000000000069bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000069bf0c R13: 00007ffeb53f178f R14: 00000000004668b0 R15: 0000000000000003 After commit 0397c6d85f9c ("mptcp: keep unaccepted MPC subflow into join list"), the msk's workqueue and/or PM can touch the MPC subflow - and acquire its socket lock - even if it's still unaccepted. If the above event races with the relevant listener socket close, we can end-up with the above splat. This change addresses the issue delaying the MPC socket insertion in conn_list at accept time - that is, partially reverting the blamed commit. We must additionally ensure that mptcp_pm_fully_established() happens after accept() time, or the PM will not be able to handle properly such event - conn_list could be empty otherwise. In the receive path, we check the subflow list node to ensure it is out of the listener queue. Be sure client subflows do not match transiently such condition moving them into the join list earlier at creation time. Since we now have multiple mptcp_pm_fully_established() call sites from different code-paths, said helper can now race with itself. Use an additional PM status bit to avoid multiple notifications. Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/103 Fixes: 0397c6d85f9c ("mptcp: keep unaccepted MPC subflow into join list"), Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10mptcp: use the variable sk instead of open-codingGeliang Tang1-2/+2
Since the local variable sk has been defined, use it instead of open-coding. Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10mptcp: rename add_addr_signal and mptcp_add_addr_statusGeliang Tang3-16/+16
Since the RM_ADDR signal had been reused with add_addr_signal, it's not suitable to call it add_addr_signal or mptcp_add_addr_status. So this patch renamed add_addr_signal to addr_signal, and renamed mptcp_add_addr_status to mptcp_addr_signal_status. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10mptcp: drop rm_addr_signal flagGeliang Tang2-5/+17
This patch reused add_addr_signal for the RM_ADDR announcing signal, by defining a new ADD_ADDR status named MPTCP_RM_ADDR_SIGNAL. Then the flag rm_addr_signal in PM could be dropped. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10mptcp: print out port and ahmac when receiving ADD_ADDRGeliang Tang1-3/+3
This patch printed out more debugging information for the ADD_ADDR suboption parsing on the incoming path. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10mptcp: add port parameter for mptcp_pm_announce_addrGeliang Tang3-6/+11
This patch added a new parameter 'port' for mptcp_pm_announce_addr. If this parameter is true, we set the MPTCP_ADD_ADDR_PORT bit of the add_addr_signal. That means the announced address is added with a port number. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10mptcp: send out dedicated packet for ADD_ADDR using portGeliang Tang3-5/+15
The process is similar to that of the ADD_ADDR IPv6, this patch also sent out a pure ack for the ADD_ADDR using port. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10mptcp: add the outgoing ADD_ADDR port supportGeliang Tang3-7/+20
This patch added a new add_addr_signal type named MPTCP_ADD_ADDR_PORT, to identify it is an address with port to be added. It also added a new parameter 'port' for both mptcp_add_addr_len and mptcp_pm_add_addr_signal. In mptcp_established_options_add_addr, we check whether the announced address is added with port. If it is, we put this port number to mptcp_out_options's port field. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10mptcp: use adding up size to get ADD_ADDR lengthGeliang Tang1-4/+8
This patch uses adding up size to get the ADD_ADDR suboption length rather than returning the ADD_ADDR size constants. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10mptcp: add port support for ADD_ADDR suboption writingGeliang Tang2-8/+32
In rfc8684, the length of ADD_ADDR suboption with IPv4 address and port is 18 octets, but mptcp_write_options is 32-bit aligned, so we need to pad it to 20 octets. All the other port related option lengths need to be added up 2 octets similarly. This patch added a new field 'port' in mptcp_out_options. When this field is set with a port number, we need to add up 4 octets for the ADD_ADDR suboption, and put the port number into the suboption. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10mptcp: unify ADD_ADDR and ADD_ADDR6 suboptions writingGeliang Tang1-20/+17
The length of ADD_ADDR6 is 12 octets longer than ADD_ADDR. That's the only difference between them. This patch dropped the duplicate code between ADD_ADDR and ADD_ADDR6 suboptions writing, and unify them into one. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10mptcp: unify ADD_ADDR and echo suboptions writingGeliang Tang1-18/+19
There are two differences between ADD_ADDR suboption and ADD_ADDR echo suboption: The length of the former is 8 octets longer than the length of the latter. The former's echo-flag is 0, and latter's echo-flag is 1. This patch added two local variables, len and echo, to unify ADD_ADDR and ADD_ADDR echo suboptions writing. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08mptcp: print new line in mptcp_seq_show() if mptcp isn't in useJianguo Wu1-0/+1
When do cat /proc/net/netstat, the output isn't append with a new line, it looks like this: [root@localhost ~]# cat /proc/net/netstat ... MPTcpExt: 0 0 0 0 0 0 0 0 0 0 0 0 0[root@localhost ~]# This is because in mptcp_seq_show(), if mptcp isn't in use, net->mib.mptcp_statistics is NULL, so it just puts all 0 after "MPTcpExt:", and return, forgot the '\n'. After this patch: [root@localhost ~]# cat /proc/net/netstat ... MPTcpExt: 0 0 0 0 0 0 0 0 0 0 0 0 0 [root@localhost ~]# Fixes: fc518953bc9c8d7d ("mptcp: add and use MIB counter infrastructure") Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Acked-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/142e2fd9-58d9-bb13-fb75-951cccc2331e@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03mptcp: emit tcp reset when a join request failsFlorian Westphal1-11/+36
RFC 8684 says: If the token is unknown or the host wants to refuse subflow establishment (for example, due to a limit on the number of subflows it will permit), the receiver will send back a reset (RST) signal, analogous to an unknown port in TCP, containing an MP_TCPRST option (Section 3.6) with an "MPTCP specific error" reason code. mptcp-next doesn't support MP_TCPRST yet, this can be added in another change. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03tcp: merge 'init_req' and 'route_req' functionsFlorian Westphal1-12/+24
The Multipath-TCP standard (RFC 8684) says that an MPTCP host should send a TCP reset if the token in a MP_JOIN request is unknown. At this time we don't do this, the 3whs completes and the 'new subflow' is reset afterwards. There are two ways to allow MPTCP to send the reset. 1. override 'send_synack' callback and emit the rst from there. The drawback is that the request socket gets inserted into the listeners queue just to get removed again right away. 2. Send the reset from the 'route_req' function instead. This avoids the 'add&remove request socket', but route_req lacks the skb that is required to send the TCP reset. Instead of just adding the skb to that function for MPTCP sake alone, Paolo suggested to merge init_req and route_req functions. This saves one indirection from syn processing path and provides the skb to the merged function at the same time. 'send reset on unknown mptcp join token' is added in next patch. Suggested-by: Paolo Abeni <pabeni@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-02mptcp: avoid potential infinite loop in mptcp_recvmsg()Eric Dumazet1-1/+1
If a packet is ready in receive queue, and application isssues a recvmsg()/recvfrom()/recvmmsg() request asking for zero bytes, we hang in mptcp_recvmsg(). Fixes: ea4ca586b16f ("mptcp: refine MPTCP-level ack scheduling") Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Link: https://lore.kernel.org/r/20201202171657.1185108-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01mptcp: use mptcp release_cb for delayed tasksPaolo Abeni4-117/+168
We have some tasks triggered by the subflow receive path which require to access the msk socket status, specifically: mptcp_clean_una() and mptcp_push_pending() We have almost everything in place to defer to the msk release_cb such tasks when the msk sock is owned. Since the worker is no more used to clean the acked data, for fallback sockets we need to explicitly flush them. As an added bonus we can move the wake-up code in __mptcp_clean_una(), simplify a lot mptcp_poll() and move the timer update under the data lock. The worker is now used only to process and send DATA_FIN packets and do the mptcp-level retransmissions. Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01mptcp: avoid a few atomic ops in the rx pathPaolo Abeni4-43/+34
Extending the data_lock scope in mptcp_incoming_option we can use that to protect both snd_una and wnd_end. In the typical case, we will have a single atomic op instead of 2 Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01mptcp: allocate TX skbs in msk contextPaolo Abeni2-42/+210
Move the TX skbs allocation in mptcp_sendmsg() scope, and tentatively pre-allocate a skbs number proportional to the sendmsg() length. Use the ssk tx skb cache to prevent the subflow allocation. This allows removing the msk skb extension cache and will make possible the later patches. Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01mptcp: protect the rx path with the msk socket spinlockPaolo Abeni2-47/+107
Such spinlock is currently used only to protect the 'owned' flag inside the socket lock itself. With this patch, we extend its scope to protect the whole msk receive path and sk_forward_memory. Given the above, we can always move data into the msk receive queue (and OoO queue) from the subflow. We leverage the previous commit, so that we need to acquire the spinlock in the tx path only when moving fwd memory. recvmsg() must now explicitly acquire the socket spinlock when moving skbs out of sk_receive_queue. To reduce the number of lock operations required we use a second rx queue and splice the first into the latter in mptcp_lock_sock(). Additionally rmem allocated memory is bulk-freed via release_cb() Acked-by: Florian Westphal <fw@strlen.de> Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01mptcp: implement wmem reservationPaolo Abeni2-7/+86
This leverages the previous commit to reserve the wmem required for the sendmsg() operation when the msk socket lock is first acquired. Some heuristics are used to get a reasonable [over] estimation of the whole memory required. If we can't forward alloc such amount fallback to a reasonable small chunk, otherwise enter the wait for memory path. When sendmsg() needs more memory it looks at wmem_reserved first and if that is exhausted, move more space from sk_forward_alloc. The reserved memory is not persistent and is released at the next socket unlock via the release_cb(). Overall this will simplify the next patch. Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01mptcp: open code mptcp variant for lock_sockPaolo Abeni1-0/+13
This allows invoking an additional callback under the socket spin lock. Will be used by the next patches to avoid additional spin lock contention. Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-3/+2
Trivial conflict in CAN, keep the net-next + the byteswap wrapper. Conflicts: drivers/net/can/usb/gs_usb.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27mptcp: fix NULL ptr dereference on bad MPJPaolo Abeni1-3/+2
If an msk listener receives an MPJ carrying an invalid token, it will zero the request socket msk entry. That should later cause fallback and subflow reset - as per RFC - at subflow_syn_recv_sock() time due to failing hmac validation. Since commit 4cf8b7e48a09 ("subflow: introduce and use mptcp_can_accept_new_subflow()"), we unconditionally dereference - in mptcp_can_accept_new_subflow - the subflow request msk before performing hmac validation. In the above scenario we hit a NULL ptr dereference. Address the issue doing the hmac validation earlier. Fixes: 4cf8b7e48a09 ("subflow: introduce and use mptcp_can_accept_new_subflow()") Tested-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/03b2cfa3ac80d8fc18272edc6442a9ddf0b1e34e.1606400227.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-26mptcp: be careful on MPTCP-level ack.Paolo Abeni1-18/+49
We can enter the main mptcp_recvmsg() loop even when no subflows are connected. As note by Eric, that would result in a divide by zero oops on ack generation. Address the issue by checking the subflow status before sending the ack. Additionally protect mptcp_recvmsg() against invocation with weird socket states. v1 -> v2: - removed unneeded inline keyword - Jakub Reported-and-suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Fixes: ea4ca586b16f ("mptcp: refine MPTCP-level ack scheduling") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/5370c0ae03449239e3d1674ddcfb090cf6f20abe.1606253206.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25mptcp: put reference in mptcp timeout timerFlorian Westphal1-0/+1
On close this timer might be scheduled. mptcp uses sk_reset_timer for this, so the a reference on the mptcp socket is taken. This causes a refcount leak which can for example be reproduced with 'mp_join_server_v4.pkt' from the mptcp-packetdrill repo. The leak has nothing to do with join requests, v1_mp_capable_bind_no_cs.pkt works too when replacing the last ack mpcapable to v1 instead of v0. unreferenced object 0xffff888109bba040 (size 2744): comm "packetdrill", [..] backtrace: [..] sk_prot_alloc.isra.0+0x2b/0xc0 [..] sk_clone_lock+0x2f/0x740 [..] mptcp_sk_clone+0x33/0x1a0 [..] subflow_syn_recv_sock+0x2b1/0x690 [..] Fixes: e16163b6e2b7 ("mptcp: refactor shutdown and close") Cc: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20201124162446.11448-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-21mptcp: refine MPTCP-level ack schedulingPaolo Abeni4-57/+61
Send timely MPTCP-level ack is somewhat difficult when the insertion into the msk receive level is performed by the worker. It needs TCP-level dup-ack to notify the MPTCP-level ack_seq increase, as both the TCP-level ack seq and the rcv window are unchanged. We can actually avoid processing incoming data with the worker, and let the subflow or recevmsg() send ack as needed. When recvmsg() moves the skbs inside the msk receive queue, the msk space is still unchanged, so tcp_cleanup_rbuf() could end-up skipping TCP-level ack generation. Anyway, when __mptcp_move_skbs() is invoked, a known amount of bytes is going to be consumed soon: we update rcv wnd computation taking them in account. Additionally we need to explicitly trigger tcp_cleanup_rbuf() when recvmsg() consumes a significant amount of the receive buffer. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-21mptcp: track window announced to peerFlorian Westphal3-6/+29
OoO handling attempts to detect when packet is out-of-window by testing current ack sequence and remaining space vs. sequence number. This doesn't work reliably. Store the highest allowed sequence number that we've announced and use it to detect oow packets. Do this when mptcp options get written to the packet (wire format). For this to work we need to move the write_options call until after stack selected a new tcp window. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-21mptcp: send out dedicated ADD_ADDR packetGeliang Tang5-6/+80
When ADD_ADDR suboption includes an IPv6 address, the size is 28 octets. It will not fit when other MPTCP suboptions are included in this packet, e.g. DSS. So here we send out an ADD_ADDR dedicated packet to carry only ADD_ADDR suboption, no other MPTCP suboptions. In mptcp_pm_announce_addr, we check whether this is an IPv6 ADD_ADDR. If it is, we set the flag MPTCP_ADD_ADDR_IPV6 to true. Then we call mptcp_pm_nl_add_addr_send_ack to sent out a new pure ACK packet. In mptcp_established_options_add_addr, we check whether this is a pure ACK packet for ADD_ADDR. If it is, we drop all other MPTCP suboptions in this packet, only put ADD_ADDR suboption in it. Suggested-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-21mptcp: change add_addr_signal typeGeliang Tang2-9/+21
This patch changed the 'add_addr_signal' type from bool to char, so that we could encode the addr type there. Suggested-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-21mptcp: keep unaccepted MPC subflow into join listPaolo Abeni3-21/+22
This will simplify all operation dealing with subflows before accept time (e.g. data fin processing, add_addr). The join list is already flushed by mptcp_stream_accept() before returning the newly created msk to the user space. This also fixes an potential bug present into the old code: conn_list was manipulated without helding the msk lock in mptcp_stream_accept(). Tested-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-21mptcp: skip to next candidate if subflow has unacked dataFlorian Westphal1-1/+4
In case a subflow path is blocked, MPTCP-level retransmit may not take place anymore because such subflow is likely to have unacked data left in its write queue. Ignore subflows that have experienced loss and test next candidate. Fixes: 3b1d6210a95773691 ("mptcp: implement and use MPTCP-level retransmission") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-21mptcp: fix state tracking for fallback socketPaolo Abeni1-5/+13
We need to cope with some more state transition for fallback sockets, or could still end-up moving to TCP_CLOSE too early and avoid spooling some pending data Fixes: e16163b6e2b7 ("mptcp: refactor shutdown and close") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-21mptcp: drop WORKER_RUNNING status bitPaolo Abeni2-8/+1
Only mptcp_close() can actually cancel the workqueue, no need to add and use this flag. Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20mptcp: update rtx timeout only if required.Paolo Abeni1-4/+5
We must start the retransmission timer only there are pending data in the rtx queue. Otherwise we can hit a WARN_ON in mptcp_reset_timer(), as syzbot demonstrated. Reported-and-tested-by: syzbot+42aa53dafb66a07e5a24@syzkaller.appspotmail.com Fixes: d9ca1de8c0cd ("mptcp: move page frag allocation in mptcp_sendmsg()") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://lore.kernel.org/r/1a72039f112cae048c44d398ffa14e0a1432db3d.1605737083.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20crypto: sha - split sha.h into sha1.h and sha2.hEric Biggers3-3/+3
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2, and <crypto/sha3.h> contains declarations for SHA-3. This organization is inconsistent, but more importantly SHA-1 is no longer considered to be cryptographically secure. So to the extent possible, SHA-1 shouldn't be grouped together with any of the other SHA versions, and usage of it should be phased out. Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and <crypto/sha2.h>, and make everyone explicitly specify whether they want the declarations for SHA-1, SHA-2, or both. This avoids making the SHA-1 declarations visible to files that don't want anything to do with SHA-1. It also prepares for potentially moving sha1.h into a new insecure/ or dangerous/ directory. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-16mptcp: send explicit ack on delayed ack_seq incrPaolo Abeni1-13/+21
When the worker moves some bytes from the OoO queue into the receive queue, the msk->ask_seq is updated, the MPTCP-level ack carrying that value needs to wait the next ingress packet, possibly slowing down or hanging the peer Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16mptcp: keep track of advertised windows right edgeFlorian Westphal3-5/+69
Before sending 'x' new bytes also check that the new snd_una would be within the permitted receive window. For every ACK that also contains a DSS ack, check whether its tcp-level receive window would advance the current mptcp window right edge and update it if so. Signed-off-by: Florian Westphal <fw@strlen.de> Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16mptcp: rework poll+nospace handlingFlorian Westphal3-51/+54
MPTCP maintains a status bit, MPTCP_SEND_SPACE, that is set when at least one subflow and the mptcp socket itself are writeable. mptcp_poll returns EPOLLOUT if the bit is set. mptcp_sendmsg makes sure MPTCP_SEND_SPACE gets cleared when last write has used up all subflows or the mptcp socket wmem. This reworks nospace handling as follows: MPTCP_SEND_SPACE is replaced with MPTCP_NOSPACE, i.e. inverted meaning. This bit is set when the mptcp socket is not writeable. The mptcp-level ack path schedule will then schedule the mptcp worker to allow it to free already-acked data (and reduce wmem usage). This will then wake userspace processes that wait for a POLLOUT event. sendmsg will set MPTCP_NOSPACE only when it has to wait for more wmem (blocking I/O case). poll path will set MPTCP_NOSPACE in case the mptcp socket is not writeable. Normal tcp-level notification (SOCK_NOSPACE) is only enabled in case the subflow socket has no available wmem. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16mptcp: try to push pending data on snd una updatesPaolo Abeni1-0/+3
After the previous patch we may end-up with unsent data in the write buffer. If such buffer is full, the writer will block for unlimited time. We need to trigger the MPTCP xmit path even for the subflow rx path, on MPTCP snd_una updates. Keep things simple and just schedule the work queue if needed. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16mptcp: move page frag allocation in mptcp_sendmsg()Paolo Abeni1-217/+189
mptcp_sendmsg() is refactored so that first it copies the data provided from user space into the send queue, and then tries to spool the send queue via sendmsg_frag. There a subtle change in the mptcp level collapsing on consecutive data fragment: we now allow that only on unsent data. The latter don't need to deal with msghdr data anymore and can be simplified in a relevant way. snd_nxt and write_seq are now tracked independently. Overall this allows some relevant cleanup and will allow sending pending mptcp data on msk una update in later patch. Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16mptcp: refactor shutdown and closePaolo Abeni5-110/+273
We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16mptcp: introduce MPTCP snd_nxtPaolo Abeni3-12/+16
Track the next MPTCP sequence number used on xmit, currently always equal to write_next. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-18 23:48:57 +0300