summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)AuthorFilesLines
2020-03-11mac80211: consider more elements in parsing CRCJohannes Berg1-6/+12
[ Upstream commit a04564c99bb4a92f805a58e56b2d22cc4978f152 ] We only use the parsing CRC for checking if a beacon changed, and elements with an ID > 63 cannot be represented in the filter. Thus, like we did before with WMM and Cisco vendor elements, just statically add these forgotten items to the CRC: - WLAN_EID_VHT_OPERATION - WLAN_EID_OPMODE_NOTIF I guess that in most cases when VHT/HE operation change, the HT operation also changed, and so the change was picked up, but we did notice that pure operating mode notification changes were ignored. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-22-luca@coelho.fi [restrict to VHT for the mac80211 branch] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-05mac80211: Fix TKIP replay protection immediately after key setupJouni Malinen1-3/+15
[ Upstream commit 6f601265215a421f425ba3a4850a35861d024643 ] TKIP replay protection was skipped for the very first frame received after a new key is configured. While this is potentially needed to avoid dropping a frame in some cases, this does leave a window for replay attacks with group-addressed frames at the station side. Any earlier frame sent by the AP using the same key would be accepted as a valid frame and the internal RSC would then be updated to the TSC from that frame. This would allow multiple previously transmitted group-addressed frames to be replayed until the next valid new group-addressed frame from the AP is received by the station. Fix this by limiting the no-replay-protection exception to apply only for the case where TSC=0, i.e., when this is for the very first frame protected using the new key, and the local RSC had not been set to a higher value when configuring the key (which may happen with GTK). Signed-off-by: Jouni Malinen <j@w1.fi> Link: https://lore.kernel.org/r/20200107153545.10934-1-j@w1.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-05cfg80211: Fix radar event during another phy CACOrr Mazor1-0/+23
[ Upstream commit 26ec17a1dc5ecdd8d91aba63ead6f8b5ad5dea0d ] In case a radar event of CAC_FINISHED or RADAR_DETECTED happens during another phy is during CAC we might need to cancel that CAC. If we got a radar in a channel that another phy is now doing CAC on then the CAC should be canceled there. If, for example, 2 phys doing CAC on the same channels, or on comptable channels, once on of them will finish his CAC the other might need to cancel his CAC, since it is no longer relevant. To fix that the commit adds an callback and implement it in mac80211 to end CAC. This commit also adds a call to said callback if after a radar event we see the CAC is no longer relevant Signed-off-by: Orr Mazor <Orr.Mazor@tandemg.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20191222145449.15792-1-Orr.Mazor@tandemg.com [slightly reformat/reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-05mac80211: mesh: restrict airtime metric to peered established plinksMarkus Theil1-0/+3
[ Upstream commit 02a614499600af836137c3fbc4404cd96365fff2 ] The following warning is triggered every time an unestablished mesh peer gets dumped. Checks if a peer link is established before retrieving the airtime link metric. [ 9563.022567] WARNING: CPU: 0 PID: 6287 at net/mac80211/mesh_hwmp.c:345 airtime_link_metric_get+0xa2/0xb0 [mac80211] [ 9563.022697] Hardware name: PC Engines apu2/apu2, BIOS v4.10.0.3 [ 9563.022756] RIP: 0010:airtime_link_metric_get+0xa2/0xb0 [mac80211] [ 9563.022838] Call Trace: [ 9563.022897] sta_set_sinfo+0x936/0xa10 [mac80211] [ 9563.022964] ieee80211_dump_station+0x6d/0x90 [mac80211] [ 9563.023062] nl80211_dump_station+0x154/0x2a0 [cfg80211] [ 9563.023120] netlink_dump+0x17b/0x370 [ 9563.023130] netlink_recvmsg+0x2a4/0x480 [ 9563.023140] ____sys_recvmsg+0xa6/0x160 [ 9563.023154] ___sys_recvmsg+0x93/0xe0 [ 9563.023169] __sys_recvmsg+0x7e/0xd0 [ 9563.023210] do_syscall_64+0x4e/0x140 [ 9563.023217] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20191203180644.70653-1-markus.theil@tu-ilmenau.de [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27mac80211: accept deauth frames in IBSS modeJohannes Berg1-1/+10
[ Upstream commit 95697f9907bfe3eab0ef20265a766b22e27dde64 ] We can process deauth frames and all, but we drop them very early in the RX path today - this could never have worked. Fixes: 2cc59e784b54 ("mac80211: reply to AUTH with DEAUTH if sta allocation fails in IBSS") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20191004123706.15768-2-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27mac80211: minstrel_ht: fix per-group max throughput rate initializationFelix Fietkau1-1/+1
[ Upstream commit 56dd918ff06e3ee24d8067e93ed12b2a39e71394 ] The group number needs to be multiplied by the number of rates per group to get the full rate index Fixes: 5935839ad735 ("mac80211: improve minstrel_ht rate sorting by throughput & probability") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20190820095449.45255-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-17mac80211: Do not send Layer 2 Update frame before authorizationJouni Malinen2-10/+8
commit 3e493173b7841259a08c5c8e5cbe90adb349da7e upstream. The Layer 2 Update frame is used to update bridges when a station roams to another AP even if that STA does not transmit any frames after the reassociation. This behavior was described in IEEE Std 802.11F-2003 as something that would happen based on MLME-ASSOCIATE.indication, i.e., before completing 4-way handshake. However, this IEEE trial-use recommended practice document was published before RSN (IEEE Std 802.11i-2004) and as such, did not consider RSN use cases. Furthermore, IEEE Std 802.11F-2003 was withdrawn in 2006 and as such, has not been maintained amd should not be used anymore. Sending out the Layer 2 Update frame immediately after association is fine for open networks (and also when using SAE, FT protocol, or FILS authentication when the station is actually authenticated by the time association completes). However, it is not appropriate for cases where RSN is used with PSK or EAP authentication since the station is actually fully authenticated only once the 4-way handshake completes after authentication and attackers might be able to use the unauthenticated triggering of Layer 2 Update frame transmission to disrupt bridge behavior. Fix this by postponing transmission of the Layer 2 Update frame from station entry addition to the point when the station entry is marked authorized. Similarly, send out the VLAN binding update only if the STA entry has already been authorized. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17cfg80211/mac80211: make ieee80211_send_layer2_update a public functionDedy Lansky1-46/+2
commit 30ca1aa536211f5ac3de0173513a7a99a98a97f3 upstream. Make ieee80211_send_layer2_update() a common function so other drivers can re-use it. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 4.14 as dependency of commit 3e493173b784 "mac80211: Do not send Layer 2 Update frame before authorization"] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31mac80211: consider QoS Null frames for STA_NULLFUNC_ACKEDThomas Pedersen1-1/+2
[ Upstream commit 08a5bdde3812993cb8eb7aa9124703df0de28e4b ] Commit 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing") let STAs send QoS Null frames as PS triggers if the AP was a QoS STA. However, the mac80211 PS stack relies on an interface flag IEEE80211_STA_NULLFUNC_ACKED for determining trigger frame ACK, which was not being set for acked non-QoS Null frames. The effect is an inability to trigger hardware sleep via IEEE80211_CONF_PS since the QoS Null frame was seemingly never acked. This bug only applies to drivers which set both IEEE80211_HW_REPORTS_TX_ACK_STATUS and IEEE80211_HW_PS_NULLFUNC_STACK. Detect the acked QoS Null frame to restore STA power save. Fixes: 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing") Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20191119053538.25979-4-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05mac80211: fix station inactive_time shortly after bootAhmed Zaki1-1/+2
[ Upstream commit 285531f9e6774e3be71da6673d475ff1a088d675 ] In the first 5 minutes after boot (time of INITIAL_JIFFIES), ieee80211_sta_last_active() returns zero if last_ack is zero. This leads to "inactive time" showing jiffies_to_msecs(jiffies). # iw wlan0 station get fc:ec:da:64:a6:dd Station fc:ec:da:64:a6:dd (on wlan0) inactive time: 4294894049 ms . . connected time: 70 seconds Fix by returning last_rx if last_ack == 0. Signed-off-by: Ahmed Zaki <anzaki@gmail.com> Link: https://lore.kernel.org/r/20191031121243.27694-1-anzaki@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-24mac80211: minstrel: fix sampling/reporting of CCK rates in HT modeFelix Fietkau1-4/+10
[ Upstream commit 972b66b86f85f4e8201db454f4c3e9d990cf9836 ] Long/short preamble selection cannot be sampled separately, since it depends on the BSS state. Because of that, sampling attempts to currently not used preamble modes are not counted in the statistics, which leads to CCK rates being sampled too often. Fix statistics accounting for long/short preamble by increasing the index where necessary. Fix excessive CCK rate sampling by dropping unsupported sample attempts. This improves throughput on 2.4 GHz channels Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-24mac80211: minstrel: fix CCK rate group streams valueFelix Fietkau1-1/+1
[ Upstream commit 80df9be67c44cb636bbc92caeddad8caf334c53c ] Fixes a harmless underflow issue when CCK rates are actively being used Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-24mac80211: minstrel: fix using short preamble CCK rates on HT clientsFelix Fietkau1-3/+1
[ Upstream commit 37439f2d6e43ae79e22be9be159f0af157468f82 ] mi->supported[MINSTREL_CCK_GROUP] needs to be updated short preamble rates need to be marked as supported regardless of whether it's currently enabled. Its state can change at any time without a rate_update call. Fixes: 782dda00ab8e ("mac80211: minstrel_ht: move short preamble check out of get_rate") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-29mac80211: Reject malformed SSID elementsWill Deacon1-2/+3
commit 4152561f5da3fca92af7179dd538ea89e248f9d0 upstream. Although this shouldn't occur in practice, it's a good idea to bounds check the length field of the SSID element prior to using it for things like allocations or memcpy operations. Cc: <stable@vger.kernel.org> Cc: Kees Cook <keescook@chromium.org> Reported-by: Nicolas Waisman <nico@semmle.com> Signed-off-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20191004095132.15777-1-will@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-29mac80211: fix txq null pointer dereferenceMiaoqing Pan1-2/+9
[ Upstream commit 8ed31a264065ae92058ce54aa3cc8da8d81dc6d7 ] If the interface type is P2P_DEVICE or NAN, read the file of '/sys/kernel/debug/ieee80211/phyx/netdev:wlanx/aqm' will get a NULL pointer dereference. As for those interface type, the pointer sdata->vif.txq is NULL. Unable to handle kernel NULL pointer dereference at virtual address 00000011 CPU: 1 PID: 30936 Comm: cat Not tainted 4.14.104 #1 task: ffffffc0337e4880 task.stack: ffffff800cd20000 PC is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211] LR is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211] [...] Process cat (pid: 30936, stack limit = 0xffffff800cd20000) [...] [<ffffff8000b7cd00>] ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211] [<ffffff8000b7c414>] ieee80211_if_read+0x60/0xbc [mac80211] [<ffffff8000b7ccc4>] ieee80211_if_read_aqm+0x28/0x30 [mac80211] [<ffffff80082eff94>] full_proxy_read+0x2c/0x48 [<ffffff80081eef00>] __vfs_read+0x2c/0xd4 [<ffffff80081ef084>] vfs_read+0x8c/0x108 [<ffffff80081ef494>] SyS_read+0x40/0x7c Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/1569549796-8223-1-git-send-email-miaoqing@codeaurora.org [trim useless data from commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-06mac80211: fix possible sta leakJohannes Berg1-4/+5
commit 5fd2f91ad483baffdbe798f8a08f1b41442d1e24 upstream. If TDLS station addition is rejected, the sta memory is leaked. Avoid this by moving the check before the allocation. Cc: stable@vger.kernel.org Fixes: 7ed5285396c2 ("mac80211: don't initiate TDLS connection if station is not associated to AP") Link: https://lore.kernel.org/r/20190801073033.7892-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-16mac80211: don't WARN on short WMM parameters from APBrian Norris1-0/+10
commit 05aaa5c97dce4c10a9e7eae2f1569a684e0c5ced upstream. In a very similar spirit to commit c470bdc1aaf3 ("mac80211: don't WARN on bad WMM parameters from buggy APs"), an AP may not transmit a fully-formed WMM IE. For example, it may miss or repeat an Access Category. The above loop won't catch that and will instead leave one of the four ACs zeroed out. This triggers the following warning in drv_conf_tx() wlan0: invalid CW_min/CW_max: 0/0 and it may leave one of the hardware queues unconfigured. If we detect such a case, let's just print a warning and fall back to the defaults. Tested with a hacked version of hostapd, intentionally corrupting the IEs in hostapd_eid_wmm(). Cc: stable@vger.kernel.org Signed-off-by: Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20190726224758.210953-1-briannorris@chromium.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-16mac80211: don't warn about CW params when not using themBrian Norris1-4/+9
[ Upstream commit d2b3fe42bc629c2d4002f652b3abdfb2e72991c7 ] ieee80211_set_wmm_default() normally sets up the initial CW min/max for each queue, except that it skips doing this if the driver doesn't support ->conf_tx. We still end up calling drv_conf_tx() in some cases (e.g., ieee80211_reconfig()), which also still won't do anything useful...except it complains here about the invalid CW parameters. Let's just skip the WARN if we weren't going to do anything useful with the parameters. Signed-off-by: Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20190718015712.197499-1-briannorris@chromium.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-21mac80211: only warn once on chanctx_conf being NULLYibo Zhao1-1/+1
[ Upstream commit 563572340173865a9a356e6bb02579e6998a876d ] In multiple SSID cases, it takes time to prepare every AP interface to be ready in initializing phase. If a sta already knows everything it needs to join one of the APs and sends authentication to the AP which is not fully prepared at this point of time, AP's channel context could be NULL. As a result, warning message occurs. Even worse, if the AP is under attack via tools such as MDK3 and massive authentication requests are received in a very short time, console will be hung due to kernel warning messages. WARN_ON_ONCE() could be a better way for indicating warning messages without duplicate messages to flood the console. Johannes: We still need to address the underlying problem, but we don't really have a good handle on it yet. Suppress the worst side-effects for now. Signed-off-by: Zhi Chen <zhichen@codeaurora.org> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> [johannes: add note, change subject] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-21mac80211: free peer keys before vif down in meshPradeep Kumar Chitrapu1-0/+1
[ Upstream commit 0112fa557c3bb3a002bc85760dc3761d737264d3 ] freeing peer keys after vif down is resulting in peer key uninstall to fail due to interface lookup failure. so fix that. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-21mac80211: mesh: fix RCU warningThomas Pedersen1-1/+4
[ Upstream commit 551842446ed695641a00782cd118cbb064a416a1 ] ifmsh->csa is an RCU-protected pointer. The writer context in ieee80211_mesh_finish_csa() is already mutually exclusive with wdev->sdata.mtx, but the RCU checker did not know this. Use rcu_dereference_protected() to avoid a warning. fixes the following warning: [ 12.519089] ============================= [ 12.520042] WARNING: suspicious RCU usage [ 12.520652] 5.1.0-rc7-wt+ #16 Tainted: G W [ 12.521409] ----------------------------- [ 12.521972] net/mac80211/mesh.c:1223 suspicious rcu_dereference_check() usage! [ 12.522928] other info that might help us debug this: [ 12.523984] rcu_scheduler_active = 2, debug_locks = 1 [ 12.524855] 5 locks held by kworker/u8:2/152: [ 12.525438] #0: 00000000057be08c ((wq_completion)phy0){+.+.}, at: process_one_work+0x1a2/0x620 [ 12.526607] #1: 0000000059c6b07a ((work_completion)(&sdata->csa_finalize_work)){+.+.}, at: process_one_work+0x1a2/0x620 [ 12.528001] #2: 00000000f184ba7d (&wdev->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x2f/0x90 [ 12.529116] #3: 00000000831a1f54 (&local->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x47/0x90 [ 12.530233] #4: 00000000fd06f988 (&local->chanctx_mtx){+.+.}, at: ieee80211_csa_finalize_work+0x51/0x90 Signed-off-by: Thomas Pedersen <thomas@eero.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-25mac80211: Do not use stack memory with scatterlist for GMACJouni Malinen1-1/+6
commit a71fd9dac23613d96ba3c05619a8ef4fd6cdf9b9 upstream. ieee80211_aes_gmac() uses the mic argument directly in sg_set_buf() and that does not allow use of stack memory (e.g., BUG_ON() is hit in sg_set_buf() with CONFIG_DEBUG_SG). BIP GMAC TX side is fine for this since it can use the skb data buffer, but the RX side was using a stack variable for deriving the local MIC value to compare against the received one. Fix this by allocating heap memory for the mic buffer. This was found with hwsim test case ap_cipher_bip_gmac_128 hitting that BUG_ON() and kernel panic. Cc: stable@vger.kernel.org Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-25mac80211: handle deauthentication/disassociation from TDLS peerYu Wang3-1/+37
commit 79c92ca42b5a3e0ea172ea2ce8df8e125af237da upstream. When receiving a deauthentication/disassociation frame from a TDLS peer, a station should not disconnect the current AP, but only disable the current TDLS link if it's enabled. Without this change, a TDLS issue can be reproduced by following the steps as below: 1. STA-1 and STA-2 are connected to AP, bidirection traffic is running between STA-1 and STA-2. 2. Set up TDLS link between STA-1 and STA-2, stay for a while, then teardown TDLS link. 3. Repeat step #2 and monitor the connection between STA and AP. During the test, one STA may send a deauthentication/disassociation frame to another, after TDLS teardown, with reason code 6/7, which means: Class 2/3 frame received from nonassociated STA. On receive this frame, the receiver STA will disconnect the current AP and then reconnect. It's not a expected behavior, purpose of this frame should be disabling the TDLS link, not the link with AP. Cc: stable@vger.kernel.org Signed-off-by: Yu Wang <yyuwang@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-25mac80211: drop robust management frames from unknown TAJohannes Berg1-0/+2
commit 588f7d39b3592a36fb7702ae3b8bdd9be4621e2f upstream. When receiving a robust management frame, drop it if we don't have rx->sta since then we don't have a security association and thus couldn't possibly validate the frame. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-31mac80211/cfg80211: update bss channel on channel switchSergey Matyukevich1-3/+0
[ Upstream commit 5dc8cdce1d722c733f8c7af14c5fb595cfedbfa8 ] FullMAC STAs have no way to update bss channel after CSA channel switch completion. As a result, user-space tools may provide inconsistent channel info. For instance, consider the following two commands: $ sudo iw dev wlan0 link $ sudo iw dev wlan0 info The latter command gets channel info from the hardware, so most probably its output will be correct. However the former command gets channel info from scan cache, so its output will contain outdated channel info. In fact, current bss channel info will not be updated until the next [re-]connect. Note that mac80211 STAs have a workaround for this, but it requires access to internal cfg80211 data, see ieee80211_chswitch_work: /* XXX: shouldn't really modify cfg80211-owned data! */ ifmgd->associated->channel = sdata->csa_chandef.chan; This patch suggests to convert mac80211 workaround into cfg80211 behavior and to update current bss channel in cfg80211_ch_switch_notify. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-25mac80211: Fix kernel panic due to use of txq after freeBhagavathi Perumal S1-0/+3
[ Upstream commit f1267cf3c01b12e0f843fb6a7450a7f0b2efab8a ] The txq of vif is added to active_txqs list for ATF TXQ scheduling in the function ieee80211_queue_skb(), but it was not properly removed before freeing the txq object. It was causing use after free of the txq objects from the active_txqs list, result was kernel panic due to invalid memory access. Fix kernel invalid memory access by properly removing txq object from active_txqs list before free the object. Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16mac80211: fix memory accounting with A-MSDU aggregationFelix Fietkau1-0/+3
[ Upstream commit eb9b64e3a9f8483e6e54f4e03b2ae14ae5db2690 ] skb->truesize can change due to memory reallocation or when adding extra fragments. Adjust fq->memory_usage accordingly Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16mac80211: Increase MAX_MSG_LENAndrei Otcheretianski1-1/+6
[ Upstream commit 78be2d21cc1cd3069c6138dcfecec62583130171 ] Looks that 100 chars isn't enough for messages, as we keep getting warnings popping from different places due to message shortening. Instead of trying to shorten the prints, just increase the buffer size. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16mac80211: fix unaligned access in mesh table hash functionFelix Fietkau1-1/+1
[ Upstream commit 40586e3fc400c00c11151804dcdc93f8c831c808 ] The pointer to the last four bytes of the address is not guaranteed to be aligned, so we need to use __get_unaligned_cpu32 here Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-27mac80211: do not call driver wake_tx_queue op during reconfigFelix Fietkau1-0/+3
commit 4856bfd230985e43e84c26473c91028ff0a533bd upstream. There are several scenarios in which mac80211 can call drv_wake_tx_queue after ieee80211_restart_hw has been called and has not yet completed. Driver private structs are considered uninitialized until mac80211 has uploaded the vifs, stations and keys again, so using private tx queue data during that time is not safe. The driver can also not rely on drv_reconfig_complete to figure out when it is safe to accept drv_wake_tx_queue calls again, because it is only called after all tx queues are woken again. To fix this, bail out early in drv_wake_tx_queue if local->in_reconfig is set. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23mac80211: Fix Tx aggregation session tear down with ITXQsIlan Peer1-1/+3
[ Upstream commit 6157ca0d6bfe437691b1e98a62e2efe12b6714da ] When mac80211 requests the low level driver to stop an ongoing Tx aggregation, the low level driver is expected to call ieee80211_stop_tx_ba_cb_irqsafe() to indicate that it is ready to stop the session. The callback in turn schedules a worker to complete the session tear down, which in turn also handles the relevant state for the intermediate Tx queue. However, as this flow in asynchronous, the intermediate queue should be stopped and not continue servicing frames, as in such a case frames that are dequeued would be marked as part of an aggregation, although the aggregation is already been stopped. Fix this by stopping the intermediate Tx queue, before calling the low level driver to stop the Tx aggregation. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05mac80211: Add attribute aligned(2) to struct 'action'Mathieu Malaterre1-1/+1
[ Upstream commit 7c53eb5d87bc21464da4268c3c0c47457b6d9c9b ] During refactor in commit 9e478066eae4 ("mac80211: fix MU-MIMO follow-MAC mode") a new struct 'action' was declared with packed attribute as: struct { struct ieee80211_hdr_3addr hdr; u8 category; u8 action_code; } __packed action; But since struct 'ieee80211_hdr_3addr' is declared with an aligned keyword as: struct ieee80211_hdr { __le16 frame_control; __le16 duration_id; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; __le16 seq_ctrl; u8 addr4[ETH_ALEN]; } __packed __aligned(2); Solve the ambiguity of placing aligned structure in a packed one by adding the aligned(2) attribute to struct 'action'. This removes the following warning (W=1): net/mac80211/rx.c:234:2: warning: alignment 1 of 'struct <anonymous>' is less than 2 [-Wpacked-not-aligned] Cc: Johannes Berg <johannes.berg@intel.com> Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05mac80211: don't initiate TDLS connection if station is not associated to APBalaji Pothunoori1-0/+4
[ Upstream commit 7ed5285396c257fd4070b1e29e7b2341aae2a1ce ] Following call trace is observed while adding TDLS peer entry in driver during TDLS setup. Call Trace: [<c1301476>] dump_stack+0x47/0x61 [<c10537d2>] __warn+0xe2/0x100 [<fa22415f>] ? sta_apply_parameters+0x49f/0x550 [mac80211] [<c1053895>] warn_slowpath_null+0x25/0x30 [<fa22415f>] sta_apply_parameters+0x49f/0x550 [mac80211] [<fa20ad42>] ? sta_info_alloc+0x1c2/0x450 [mac80211] [<fa224623>] ieee80211_add_station+0xe3/0x160 [mac80211] [<c1876fe3>] nl80211_new_station+0x273/0x420 [<c170f6d9>] genl_rcv_msg+0x219/0x3c0 [<c170f4c0>] ? genl_rcv+0x30/0x30 [<c170ee7e>] netlink_rcv_skb+0x8e/0xb0 [<c170f4ac>] genl_rcv+0x1c/0x30 [<c170e8aa>] netlink_unicast+0x13a/0x1d0 [<c170ec18>] netlink_sendmsg+0x2d8/0x390 [<c16c5acd>] sock_sendmsg+0x2d/0x40 [<c16c6369>] ___sys_sendmsg+0x1d9/0x1e0 Fixing this by allowing TDLS setup request only when we have completed association. Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05mac80211: fix miscounting of ttl-dropped framesBob Copeland1-1/+3
[ Upstream commit a0dc02039a2ee54fb4ae400e0b755ed30e73e58c ] In ieee80211_rx_h_mesh_fwding, we increment the 'dropped_frames_ttl' counter when we decrement the ttl to zero. For unicast frames destined for other hosts, we stop processing the frame at that point. For multicast frames, we do not rebroadcast it in this case, but we do pass the frame up the stack to process it on this STA. That doesn't match the usual definition of "dropped," so don't count those as such. With this change, something like `ping6 -i0.2 ff02::1%mesh0` from a peer in a ttl=1 network no longer increments the counter rapidly. Signed-off-by: Bob Copeland <bobcopeland@fb.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-27mac80211: Free mpath object when rhashtable insertion failsHerbert Xu1-8/+9
commit 4ff3a9d14c6c06eaa4e5976c61599ea2bd9e81b2 upstream. When rhashtable insertion fails the mesh table code doesn't free the now-orphan mesh path object. This patch fixes that. Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27mac80211: Restore vif beacon interval if start ap failsRakesh Pillai1-1/+5
commit 83e37e0bdd1470bbe6612250b745ad39b1a7b130 upstream. The starting of AP interface can fail due to invalid beacon interval, which does not match the minimum gcd requirement set by the wifi driver. In such case, the beacon interval of that interface gets updated with that invalid beacon interval. The next time that interface is brought up in AP mode, an interface combination check is performed and the beacon interval is taken from the previously set value. In a case where an invalid beacon interval, i.e. a beacon interval value which does not satisfy the minimum gcd criteria set by the driver, is set, all the subsequent trials to bring that interface in AP mode will fail, even if the subsequent trials have a valid beacon interval. To avoid this, in case of a failure in bringing up an interface in AP mode due to interface combination error, the interface beacon interval which is stored in bss conf, needs to be restored with the last working value of beacon interval. Tested on ath10k using WCN3990. Cc: stable@vger.kernel.org Fixes: 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals") Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-15mac80211: ensure that mgmt tx skbs have tailroom for encryptionFelix Fietkau1-3/+9
commit 9d0f50b80222dc273e67e4e14410fcfa4130a90c upstream. Some drivers use IEEE80211_KEY_FLAG_SW_MGMT_TX to indicate that management frames need to be software encrypted. Since normal data packets are still encrypted by the hardware, crypto_tx_tailroom_needed_cnt gets decremented after key upload to hw. This can lead to passing skbs to ccmp_encrypt_skb, which don't have the necessary tailroom for software encryption. Change the code to add tailroom for encrypted management packets, even if crypto_tx_tailroom_needed_cnt is 0. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-12mac80211: fix radiotap vendor presence bitmap handlingJohannes Berg1-2/+3
[ Upstream commit efc38dd7d5fa5c8cdd0c917c5d00947aa0539443 ] Due to the alignment handling, it actually matters where in the code we add the 4 bytes for the presence bitmap to the length; the first field is the timestamp with 8 byte alignment so we need to add the space for the extra vendor namespace presence bitmap *before* we do any alignment for the fields. Move the presence bitmap length accounting to the right place to fix the alignment for the data properly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-13mac80211: free skb fraglist before freeing the skbSara Sharon1-0/+5
[ Upstream commit 34b1e0e9efe101822e83cc62d22443ed3867ae7a ] mac80211 uses the frag list to build AMSDU. When freeing the skb, it may not be really freed, since someone is still holding a reference to it. In that case, when TCP skb is being retransmitted, the pointer to the frag list is being reused, while the data in there is no longer valid. Since we will never get frag list from the network stack, as mac80211 doesn't advertise the capability, we can safely free and nullify it before releasing the SKB. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21mac80211: Fix condition validating WMM IEIlan Peer1-1/+1
[ Upstream commit 911a26484c33e10de6237228ca1d7293548e9f49 ] Commit c470bdc1aaf3 ("mac80211: don't WARN on bad WMM parameters from buggy APs") handled cases where an AP reports a zeroed WMM IE. However, the condition that checks the validity accessed the wrong index in the ieee80211_tx_queue_params array, thus wrongly deducing that the parameters are invalid. Fix it. Fixes: c470bdc1aaf3 ("mac80211: don't WARN on bad WMM parameters from buggy APs") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21mac80211: don't WARN on bad WMM parameters from buggy APsEmmanuel Grumbach1-1/+2
[ Upstream commit c470bdc1aaf36669e04ba65faf1092b2d1c6cabe ] Apparently, some APs are buggy enough to send a zeroed WMM IE. Don't WARN on this since this is not caused by a bug on the client's system. This aligns the condition of the WARNING in drv_conf_tx with the validity check in ieee80211_sta_wmm_params. We will now pick the default values whenever we get a zeroed WMM IE. This has been reported here: https://bugzilla.kernel.org/show_bug.cgi?id=199161 Fixes: f409079bb678 ("mac80211: sanity check CW_min/CW_max towards driver") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13mac80211: ignore NullFunc frames in the duplicate detectionEmmanuel Grumbach1-0/+1
commit 990d71846a0b7281bd933c34d734e6afc7408e7e upstream. NullFunc packets should never be duplicate just like QoS-NullFunc packets. We saw a client that enters / exits power save with NullFunc frames (and not with QoS-NullFunc) despite the fact that the association supports HT. This specific client also re-uses a non-zero sequence number for different NullFunc frames. At some point, the client had to send a retransmission of the NullFunc frame and we dropped it, leading to a misalignment in the power save state. Fix this by never consider a NullFunc frame as duplicate, just like we do for QoS NullFunc frames. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201449 CC: <stable@vger.kernel.org> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13mac80211: fix reordering of buffered broadcast packetsFelix Fietkau1-2/+2
commit 9ec1190d065998650fd9260dea8cf3e1f56c0e8c upstream. If the buffered broadcast queue contains packets, letting new packets bypass that queue can lead to heavy reordering, since the driver is probably throttling transmission of buffered multicast packets after beacons. Keep buffering packets until the buffer has been cleared (and no client is in powersave mode). Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13mac80211: ignore tx status for PS stations in ieee80211_tx_status_extFelix Fietkau1-0/+2
commit a317e65face482371de30246b6494feb093ff7f9 upstream. Make it behave like regular ieee80211_tx_status calls, except for the lack of filtered frame processing. This fixes spurious low-ack triggered disconnections with powersave clients connected to an AP. Fixes: f027c2aca0cf4 ("mac80211: add ieee80211_tx_status_noskb") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13mac80211: Clear beacon_int in ieee80211_do_stopBen Greear1-0/+2
commit 5c21e8100dfd57c806e833ae905e26efbb87840f upstream. This fixes stale beacon-int values that would keep a netdev from going up. To reproduce: Create two VAP on one radio. vap1 has beacon-int 100, start it. vap2 has beacon-int 240, start it (and it will fail because beacon-int mismatch). reconfigure vap2 to have beacon-int 100 and start it. It will fail because the stale beacon-int 240 will be used in the ifup path and hostapd never gets a chance to set the new beacon interval. Cc: stable@vger.kernel.org Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-04mac80211: fix TX status reporting for ieee80211sYuan-Chi Pang3-8/+8
[ Upstream commit c42055105785580563535e6d3143cad95c7ac7ee ] TX status reporting to ieee80211s is through ieee80211s_update_metric. There are two problems about ieee80211s_update_metric: 1. The purpose is to estimate the fail probability to a specific link. No need to restrict to data frame. 2. Current implementation does not work if wireless driver does not pass tx_status with skb. Fix this by removing ieee80211_is_data condition, passing ieee80211_tx_status directly to ieee80211s_update_metric, and putting it in both __ieee80211_tx_status and ieee80211_tx_status_ext. Signed-off-by: Yuan-Chi Pang <fu3mo6goo@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-04mac80211: TDLS: fix skb queue/priority assignmentJohannes Berg1-4/+4
[ Upstream commit cb59bc14e830028d2244861216df038165d7625d ] If the TDLS setup happens over a connection to an AP that doesn't have QoS, we nevertheless assign a non-zero TID (skb->priority) and queue mapping, which may confuse us or drivers later. Fix it by just assigning the special skb->priority and then using ieee80211_select_queue() just like other data frames would go through. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-04mac80211: fix pending queue hang due to TX_DROPBob Copeland1-1/+1
[ Upstream commit 6eae4a6c2be387fec41b0d2782c4fffb57159498 ] In our environment running lots of mesh nodes, we are seeing the pending queue hang periodically, with the debugfs queues file showing lines such as: 00: 0x00000000/348 i.e. there are a large number of frames but no stop reason set. One way this could happen is if queue processing from the pending tasklet exited early without processing all frames, and without having some future event (incoming frame, stop reason flag, ...) to reschedule it. Exactly this can occur today if ieee80211_tx() returns false due to packet drops or power-save buffering in the tx handlers. In the past, this function would return true in such cases, and the change to false doesn't seem to be intentional. Fix this case by reverting to the previous behavior. Fixes: bb42f2d13ffc ("mac80211: Move reorder-sensitive TX handlers to after TXQ dequeue") Signed-off-by: Bob Copeland <bobcopeland@fb.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-04mac80211: Always report TX statusAndrei Otcheretianski1-5/+2
[ Upstream commit 8682250b3c1b75a45feb7452bc413d004cfe3778 ] If a frame is dropped for any reason, mac80211 wouldn't report the TX status back to user space. As the user space may rely on the TX_STATUS to kick its state machines, resends etc, it's better to just report this frame as not acked instead. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-10-13mac80211: fix setting IEEE80211_KEY_FLAG_RX_MGMT for AP mode keysFelix Fietkau1-1/+1
commit 211710ca74adf790b46ab3867fcce8047b573cd1 upstream. key->sta is only valid after ieee80211_key_link, which is called later in this function. Because of that, the IEEE80211_KEY_FLAG_RX_MGMT is never set when management frame protection is enabled. Fixes: e548c49e6dc6b ("mac80211: add key flag for management keys") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 20:06:31 +0300