summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)AuthorFilesLines
2012-12-10mac80211: fix remain-on-channel (non-)cancellingJohannes Berg1-2/+0
commit 6bdd253f635f7b2ef027d116933a6c9ec148b87f upstream. Felix Liao reported that when an interface is set DOWN while another interface is executing a ROC, the warning in ieee80211_start_next_roc() (about the first item on the list having started already) triggers. This is because ieee80211_roc_purge() calls it even if it never actually changed the list of ROC items. To fix this, simply remove the function call. If it is needed then it will be done by the ieee80211_sw_roc_work() function when the ROC item that is being removed while active is cleaned up. Reported-by: Felix Liao <Felix.Liao@watchguard.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-03mac80211: deinitialize ibss-internals after emptiness checkSimon Wunderlich1-4/+4
commit b78a4932f5fb11fadf41e69c606a33fa6787574c upstream. The check whether the IBSS is active and can be removed should be performed before deinitializing the fields used for the check/search. Otherwise, the configured BSS will not be found and removed properly. To make it more clear for the future, rename sdata->u.ibss to the local pointer ifibss which is used within the checks. This behaviour was introduced by f3209bea110cade12e2b133da8b8499689cb0e2e ("mac80211: fix IBSS teardown race") Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Cc: Ignacy Gawedzki <i@lri.fr> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-27mac80211: call skb_dequeue/ieee80211_free_txskb instead of __skb_queue_purgeFelix Fietkau4-6/+20
commit 1f98ab7fef48a2968f37f422c256c9fbd978c3f0 upstream. Fixes more wifi status skb leaks, leading to hostapd/wpa_supplicant hangs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-27mac80211: don't send null data packet when not associatedJohannes Berg1-0/+2
commit 20f544eea03db4b498942558b882d463ce575c3e upstream. On resume or firmware recovery, mac80211 sends a null data packet to see if the AP is still around and hasn't disconnected us. However, it always does this even if it wasn't even connected before, leading to a warning in the new channel context code. Fix this by checking that it's associated. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-27mac80211: sync acccess to tx_filtered/ps_tx_buf queuesArik Nemtsov1-0/+5
commit 987c285c2ae2e4e32aca3a9b3252d28171c75711 upstream. These are accessed without a lock when ending STA PSM. If the sta_cleanup timer accesses these lists at the same time, we might crash. This may fix some mysterious crashes we had during ieee80211_sta_ps_deliver_wakeup. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-18mac80211: fix SSID copy on IBSS JOINAntonio Quartulli1-1/+1
commit badecb001a310408d3473b1fc2ed5aefd0bc92a9 upstream. The 'ssid' field of the cfg80211_ibss_params is a u8 pointer and its length is likely to be less than IEEE80211_MAX_SSID_LEN most of the time. This patch fixes the ssid copy in ieee80211_ibss_join() by using the SSID length to prevent it from reading beyond the string. Signed-off-by: Antonio Quartulli <ordex@autistici.org> [rewrapped commit message, small rewording] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-18mac80211: make sure data is accessible in EAPOL checkJohannes Berg1-8/+10
commit 6dbda2d00d466225f9db1dc695ff852443f28832 upstream. The code to allow EAPOL frames even when the station isn't yet marked associated needs to check that the incoming frame is long enough and due to paged RX it also can't assume skb->data contains the right data, it must use skb_copy_bits(). Fix this to avoid using data that doesn't really exist. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-18mac80211: verify that skb data is presentJohannes Berg1-1/+31
commit 9b395bc3be1cebf0144a127c7e67d56dbdac0930 upstream. A number of places in the mesh code don't check that the frame data is present and in the skb header when trying to access. Add those checks and the necessary pskb_may_pull() calls. This prevents accessing data that doesn't actually exist. To do this, export ieee80211_get_mesh_hdrlen() to be able to use it in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-18mac80211: check management frame header lengthJohannes Berg1-4/+8
commit 4a4f1a5808c8bb0b72a4f6e5904c53fb8c9cd966 upstream. Due to pskb_may_pull() checking the skb length, all non-management frames are checked on input whether their 802.11 header is fully present. Also add that check for management frames and remove a check that is now duplicate. This prevents accessing skb data beyond the frame end. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-18mac80211: don't inspect Sequence Control field on control framesJavier Cardona1-0/+4
commit f7fbf70ee9db6da6033ae50d100e017ac1f26555 upstream. Per IEEE Std. 802.11-2012, Sec 8.2.4.4.1, the sequence Control field is not present in control frames. We noticed this problem when processing Block Ack Requests. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Javier Lopez <jlopex@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-18mac80211: Only process mesh config header on frames that RA_MATCHJavier Cardona1-4/+2
commit 555cb715be8ef98b8ec362b23dfc254d432a35b1 upstream. Doing otherwise is wrong, and may wreak havoc on the mpp tables, specially if the frame is encrypted. Reported-by: Chaoxing Lin <Chaoxing.Lin@ultra-3eti.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-18mac80211: use blacklist for duplicate IE checkJohannes Berg1-7/+35
commit 9690fb169b433a66485c808e4fc352b8a0f8d866 upstream. Instead of the current whitelist which accepts duplicates only for the quiet and vendor IEs, use a blacklist of all IEs (that we currently parse) that can't be duplicated. This avoids detecting a beacon as corrupt in the future when new IEs are added that can be duplicated. Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31cfg80211/mac80211: avoid state mishmash on deauthStanislaw Gruszka1-2/+3
commit 6863255bd0e48bc41ae5a066d5c771801e92735a upstream. Avoid situation when we are on associate state in mac80211 and on disassociate state in cfg80211. This can results on crash during modules unload (like showed on this thread: http://marc.info/?t=134373976300001&r=1&w=2) and possibly other problems. Reported-by: Pedro Francisco <pedrogfrancisco@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31mac80211: use ieee80211_free_txskb in a few more placesFelix Fietkau3-5/+5
commit d4fa14cd62bd078c8e3ef39283b9f237e5b2ff0f upstream. Free tx status skbs when draining power save buffers, pending frames, or when tearing down a vif. Fixes remaining conditions that can lead to hostapd/wpa_supplicant hangs when running out of socket write memory. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31mac80211: check if key has TKIP type before updating IVStanislaw Gruszka1-1/+2
commit 4045f72bcf3c293c7c5932ef001742d8bb5ded76 upstream. This patch fix corruption which can manifest itself by following crash when switching on rfkill switch with rt2x00 driver: https://bugzilla.redhat.com/attachment.cgi?id=615362 Pointer key->u.ccmp.tfm of group key get corrupted in: ieee80211_rx_h_michael_mic_verify(): /* update IV in key information to be able to detect replays */ rx->key->u.tkip.rx[rx->security_idx].iv32 = rx->tkip_iv32; rx->key->u.tkip.rx[rx->security_idx].iv16 = rx->tkip_iv16; because rt2x00 always set RX_FLAG_MMIC_STRIPPED, even if key is not TKIP. We already check type of the key in different path in ieee80211_rx_h_michael_mic_verify() function, so adding additional check here is reasonable. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31mac80211: connect with HT20 if HT40 is not permittedJohannes Berg1-10/+20
commit 3a40414f826a8f1096d9b94c4a53ef91b25ba28d upstream. Some changes to fix issues with HT40 APs in Korea and follow-up changes to allow using HT40 even if the local regulatory database disallows it caused issues with iwlwifi (and could cause issues with other devices); iwlwifi firmware would assert if you tried to connect to an AP that has an invalid configuration (e.g. using HT40- on channel 140.) Fix this, while avoiding the "Korean AP" issue by disabling HT40 and advertising HT20 to the AP when connecting. Reported-by: Florian Reitmeir <florian@reitmeir.org> Tested-by: Florian Reitmeir <florian@reitmeir.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-28mac80211: call drv_get_tsf() in sleepable contextThomas Pedersen1-2/+1
commit 55fabefe3695241e6ccfa0cd4974f3fa497693dc upstream. The call to drv_get/set_tsf() was put on the workqueue to perform tsf adjustments since that function might sleep. However it ended up inside a spinlock, whose critical section must be atomic. Do tsf adjustment outside the spinlock instead, and get rid of a warning. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-21mac80211: use ieee80211_free_txskb to fix possible skb leaksFelix Fietkau2-12/+14
commit c3e7724b6bc2f25e46c38dbe68f09d71fafeafb8 upstream. A few places free skbs using dev_kfree_skb even though they're called after ieee80211_subif_start_xmit might have cloned it for tracking tx status. Use ieee80211_free_txskb here to prevent skb leaks. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05Merge branch 'for-john' of ↵John W. Linville2-5/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2012-09-05mac80211: Various small fixes for cfg.c: mpath_set_pinfo()LEO Airwarosu Yoichi Shinoda1-5/+4
Various small fixes for net/mac80211/cfg.c:mpath_set_pinfo(): Initialize *pinfo before filling members in, handle MESH_PATH_RESOLVED correctly, and remove bogus assignment; result in correct display of FLAGS values and meaningful EXPTIME for expired paths in iw utility. Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-04mac80211: clear bssid on auth/assoc failureEliad Peller1-0/+4
ifmgd->bssid wasn't cleared properly in some auth/assoc failure cases, causing mac80211 and the low-level driver to go out of sync. Clear ifmgd->bssid on failure, and notify the driver. Cc: stable@kernel.org # 3.4+ Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-23Merge branch 'for-john' of ↵John W. Linville1-22/+16
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2012-08-22mac80211: fix DS to MBSS address translationThomas Pedersen1-22/+16
The destination address of unicast frames forwarded through a mesh gate was being replaced with the broadcast address. Instead leave the original destination address as the mesh DA. If the nexthop address is not in the mpath table it will be resolved. If that fails, the frame will be forwarded to known mesh gates. Reported-by: Cedric Voncken <cedric.voncken@acksys.fr> Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-02Merge branch 'for-john' of ↵John W. Linville3-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2012-08-01mac80211: cancel mesh path timerJohannes Berg1-0/+1
The mesh path timer needs to be canceled when leaving the mesh as otherwise it could fire after the interface has been removed already. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-01mac80211: clear timer bits when disconnectingJohannes Berg2-0/+4
There's a corner case that can happen when we suspend with a timer running, then resume and disconnect. If we connect again, suspend and resume we might start timers that shouldn't be running. Reset the timer flags to avoid this. This affects both mesh and managed modes. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-30mac80211: don't clear sched_scan_sdata on sched scan stop requestEliad Peller1-1/+0
ieee80211_request_sched_scan_stop() cleared local->sched_scan_sdata. However, sched_scan_sdata should be cleared only after the driver calls ieee80211_sched_scan_stopped() (like with normal hw scan). Clearing sched_scan_sdata too early caused ieee80211_sched_scan_stopped_work to exit prematurely without properly cleaning all the sched scan resources and without calling cfg80211_sched_scan_stopped (so userspace wasn't notified about sched scan completion). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-30Merge remote-tracking branch 'wireless/master' into mac80211Johannes Berg40-2002/+2150
2012-07-27Merge branch 'for-3.6-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem update from Bryan Wu. * 'for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (50 commits) leds-lp8788: forgotten unlock at lp8788_led_work LEDS: propagate error codes in blinkm_detect() LEDS: memory leak in blinkm_led_common_set() leds: add new lp8788 led driver LEDS: add BlinkM RGB LED driver, documentation and update MAINTAINERS leds: max8997: Simplify max8997_led_set_mode implementation leds/leds-s3c24xx: use devm_gpio_request leds: convert Network Space v2 LED driver to devm_kzalloc() and cleanup error exit path leds: convert DAC124S085 LED driver to devm_kzalloc() leds: convert LM3530 LED driver to devm_kzalloc() and cleanup error exit path leds: convert TCA6507 LED driver to devm_kzalloc() leds: convert Freescale MC13783 LED driver to devm_kzalloc() and cleanup error exit path leds: convert ADP5520 LED driver to devm_kzalloc() and cleanup error exit path leds: convert PCA955x LED driver to devm_kzalloc() and cleanup error exit path leds: convert Sun Fire LED driver to devm_kzalloc() and cleanup error exit path leds: convert PCA9532 LED driver to devm_kzalloc() leds: convert LT3593 LED driver to devm_kzalloc() leds: convert Renesas TPU LED driver to devm_kzalloc() and cleanup error exit path leds: convert LP5523 LED driver to devm_kzalloc() and cleanup error exit path leds: convert PCA9633 LED driver to devm_kzalloc() ...
2012-07-24mac80211: fix scan_sdata assignmentJohannes Berg1-1/+1
We need to use RCU to assign scan_sdata. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-24leds: Rename led_brightness_set() to led_set_brightness()Shuah Khan1-1/+1
Rename leds external interface led_brightness_set() to led_set_brightness(). This is the second phase of the change to reduce confusion between the leds internal and external interfaces that set brightness. With this change, now the external interface is led_set_brightness(). The first phase renamed the internal interface led_set_brightness() to __led_set_brightness(). There are no changes to the interface implementations. Signed-off-by: Shuah Khan <shuahkhan@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-07-20Merge branch 'master' of ↵John W. Linville16-227/+250
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-07-19Merge branch 'for-john' of ↵John W. Linville1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-07-18mac80211: flush stations before stop beaconingEliad Peller1-0/+1
When AP interface is going down, the stations are flushed (in ieee80211_do_stop()) only after the beaconing was stopped. However, drivers might rely on stations being removed before the beaconing was stopped, in order to clean up properly. Fix it by flushing the stations on ap stop. (we already do the same for other interface types, e.g. in ieee80211_set_disassoc()) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-17Merge branch 'master' of ↵John W. Linville1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-07-17Merge branch 'for-john' of ↵John W. Linville5-20/+36
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-07-17mac80211: go out of PS before sending disassocEliad Peller1-6/+11
on disassoc, ieee80211_set_disassoc() goes out of PS before indicating BSS_CHANGED_ASSOC (not sure why this is needed, but some drivers might count on the current behavior). However, it does it after sending the disassoc frame, which results in null-data frame being sent (in order to go out of ps) after we were already sent the disassoc, which is invalid. Fix it by going out of ps before sending the disassoc. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-17mac80211: fix tx-mgmt cookie value being left uninitializedNicolas Cavallari1-0/+1
commit "mac80211: unify SW/offload remain-on-channel" moved the cookie assignment from ieee80211_mgmt_tx() to ieee80211_start_roc_work(). But the latter is only called where offchannel is needed. If offchannel isn't needed/used, a uninitialized cookie value would be returned to userspace. This patch sets the cookie value when offchannel isn't used. Signed-off-by: Nicolas Cavallari <cavallar@lri.fr> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-13cfg80211/mac80211: re-add get_channel operationJohannes Berg1-0/+11
This essentially reverts commit 2e165b818456 but introduces the get_channel operation with a new wireless_dev argument so that you can retrieve the channel per interface. This is necessary as even though we can track all interface channels (except monitor) we can't track the channel type used. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-13Revert "mac80211: refactor virtual monitor code"Johannes Berg3-17/+14
This reverts commit 870d37fc22f3e40f9f23e06c581c8538fc16a2f0. This code doesn't work as cfg80211 will call set_monitor_enabled at the wrong time and it doesn't seem to be possible to fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-13mac80211: fix use after freeAlan Cox1-2/+4
roc is destroyed then roc->started is referenced. Keep a local cache. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12Merge branch 'for-john' of ↵John W. Linville16-206/+209
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/iwmc3200wifi/cfg80211.c drivers/net/wireless/mwifiex/cfg80211.c
2012-07-12Merge branch 'master' of ↵John W. Linville11-194/+258
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-07-12mac80211: iterate the virtual monitor interfaceJohannes Berg2-10/+28
If the virtual monitor interface is requested by the driver, it should also be iterated over when the driver wants to iterate all active interfaces. To allow that protect it with the iflist_mtx. Change-Id: I58ac5de2f4ce93d12c5a98ecd2859f60158d5d69 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12minstrel_ht: enable frame aggregation for fixed rateSylvain Roger Rieunier1-2/+6
When sample_idx is set to a value other than -1 it activates the IEEE80211_TX_CTL_RATE_CTRL_PROBE flag which disables frame aggregation. To allow frame aggregation during fixed rate it is necessary to set max_tp_rate, max_tp_rate2 and max_prob_rate instead of sample_idx. Signed-off-by: Sylvain Roger Rieunier <sylvain.roger.rieunier@gmail.com> [reword commit message a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12mac80211: tx: do not drop non-robust mgmt to non-MFP stas.Nicolas Cavallari1-0/+3
When drop_unencrypted is enabled and MFP is disabled, non-robust management frames for not-yet associated STA are dropped. This isn't visible as many management frames sent from the kernel have TX_INTFL_DONT_ENCRYPT set and management frames injected from a monitor vif have TX_CTL_INJECTED so aren't dropped. But management frames sent from userspace via NL80211_CMD_FRAME do not have this flag set, so are dropped. This patch make it always accept non-robust management frames. Signed-off-by: Nicolas Cavallari <cavallar@lri.fr> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12mac80211: restructure key selectionJohannes Berg1-9/+13
The "no key" case in key selection that decides whether to drop the frame or not is impossible to understand, restructure the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> [cavallar@lri.fr: removed blank line and restructured action frame clause] Signed-off-by: Nicolas Cavallari <cavallar@lri.fr>
2012-07-12mac80211: add time synchronisation with BSS for assocJohannes Berg4-10/+16
Some drivers (iwlegacy, iwlwifi and rt2x00) today use the bss_conf.last_tsf value. By itself though that value is completely worthless since it may be ancient. What really is needed is synchronisation between some device time and the TSF. To clarify this, rename bss_conf.last_tsf to sync_tsf and add sync_device_ts which is obtained from rx_status which gets a new field device_timestamp for this purpose. This is intentionally not using the mactime field since that is used for other things and in IBSS is expected to sync with the IBSS's TSF which isn't necessarily true for the device timestamp. Also, since we have the information and it's useful even before the connection has been established, give all the timing details to the driver before authenticating. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12mac80211: redesign scan RXJohannes Berg4-80/+32
Scan receive is rather inefficient when there are multiple virtual interfaces. We iterate all of the virtual interfaces and then notify cfg80211 about each beacon many times. Redesign scan RX to happen before everything else. Then we can also get rid of IEEE80211_RX_IN_SCAN since we don't have to accept frames into the RX handlers for scanning or scheduled scanning any more. Overall, this simplifies the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12mac80211: track scheduled scan virtual interfaceJohannes Berg4-14/+15
Instead of tracking whether or not we're in a scheduled scan, track the virtual interface (sdata) in an RCU-protected pointer to make it usable from RX to check the MAC address. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-24 04:20:53 +0300