summaryrefslogtreecommitdiff
path: root/net/mac80211/sta_info.h
AgeCommit message (Collapse)AuthorFilesLines
2013-02-11wireless: fix kernel-docJohannes Berg1-0/+1
Fix most kernel-doc warnings, for some reason it seems to have issues with __aligned, don't remove the documentation entries it considers to be in excess due to that. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-04mac80211: mesh power save basicsMarco Porsch1-0/+11
Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: split aggregation stop by reasonJohannes Berg1-0/+7
The initiator/tx doesn't really identify why an aggregation session is stopped, give a reason for stopping that more clearly identifies what's going on. This will help tell the driver clearly what is expected of it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: optimise AP stop RCU handlingJohannes Berg1-0/+14
If there are VLANs, stopping an AP is inefficient as it calls rcu_barrier() once for each interface (the VLANs and the AP itself). Optimise this by moving rcu_barrier() out of the station cleanups and calling it only once for all interfaces combined. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: optimise roaming time againJohannes Berg1-1/+19
The last fixes re-added the RCU synchronize penalty on roaming to fix the races. Split up sta_info_flush() now to get rid of that again, and let managed mode (and only it) delay the actual destruction. Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: remove final sta_info_flush()Johannes Berg1-2/+1
When all interfaces have been removed, there can't be any stations left over, so there's no need to flush again. Remove this, and all code associated with it, which also simplifies the function. Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: fix station destruction in AP/mesh modesJohannes Berg1-1/+2
Unfortunately, commit b22cfcfcae5b, intended to speed up roaming by avoiding the synchronize_rcu() broke AP/mesh modes as it moved some code into that work item that will still call into the driver at a time where it's no longer expected to handle this: after the AP or mesh has been stopped. To fix this problem remove the per-station work struct, maintain a station cleanup list instead and flush this list when stations are flushed. To keep this patch smaller for stable, do this when the stations are flushed (sta_info_flush()). This unfortunately brings back the original roaming delay; I'll fix that again in a separate patch. Also, Ben reported that the original commit could sometimes (with many interfaces) cause long delays when an interface is set down, due to blocking on flush_workqueue(). Since we now maintain the cleanup list, this particular change of the original patch can be reverted. Cc: stable@vger.kernel.org [3.7] Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-29mac80211: re-organize the rx rate calculation logicSaravana1-0/+2
Currently the logic to fill a struct rate_info with a STA's last RX rate is accessible only in the cfg.c. As the RX rate calculation might be needed elsewhere, split this out into a separate function. Signed-off-by: Saravana <saravanad@posedge.com> [fix various whitespace issues, reword commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-29mac80211: add debugfs file for last ack signalSaravana1-0/+2
Add a debugfs file showing the signal strength of the ack frame that is received for the currently sent tx packet Signed-off-by: Saravana <saravanad@posedge.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26mac80211: support drivers reporting VHT RXJohannes Berg1-1/+3
Add support to mac80211 for having drivers report received VHT MCS information. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26mac80211: convert to channel definition structJohannes Berg1-2/+2
Convert mac80211 (and where necessary, some drivers a little bit) to the new channel definition struct. This will allow extending mac80211 for VHT, which is currently restricted to channel contexts since there are no drivers using that which makes it easier. As I also don't care about VHT for drivers not using the channel context API, I won't convert the previous API to VHT support. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19mac80211: introduce IEEE80211_NUM_TIDS and use itJohannes Berg1-10/+9
Introduce IEEE80211_NUM_TIDS in the generic 802.11 header file and use it in place of STA_TID_NUM and NUM_RX_DATA_QUEUES which are both really the number of TIDs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-10mac80211: use call_rcu() on sta deletionEliad Peller1-0/+2
mac80211 calls synchronize_rcu() on sta deletion, which increase the roaming time significantly. Convert it into a call_rcu() mechanism, in order to avoid blocking. Since some of the cleanup functions might sleep, schedule from the call_rcu callback a new work that will do the actual cleanup. In order to make sure the cleanup occurs before the interface went down, flush local->workqueue on ieee80211_do_stop(). Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-12mac80211: add missing kernel-docAshok Nagarajan1-0/+3
Add a few kernel-doc descriptions that were missed during mesh development. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-09mac80211: add some missing kernel-docJohannes Berg1-0/+2
Add a few kernel-doc descriptions that were missed during development. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-05-15Merge branch 'master' of ↵David S. Miller1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
2012-05-10mac80211: Convert compare_ether_addr to ether_addr_equal by handJoe Perches1-1/+1
spatch/coccinelle isn't perfect. It doesn't understand __aligned(x) and doesn't convert functions it can't parse. Convert the remaining compare_ether_addr uses. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09mac80211: Implement HT mixed protection modeAshok Nagarajan1-0/+1
Section 9.23.3.5 of IEEE 80211s standard describes the protection rules for HT mesh STA in a MBSS. Three HT protection modes are supported for now: non-HT mixed mode - is selected if any non-HT peers are present in our MBSS. 20MHz-protection mode - is selected if all peers in our 20/40MHz MBSS support HT and atleast one HT20 peer is present. no-protection mode - is selected otherwise. This is a limited implementation of 9.23.3.5, which only considers mesh peers when determining the HT protection mode. Station's channel_type needs to be maintained. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Reviewed-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: Implement mesh synchronization frameworkJavier Cardona1-0/+5
This patch adds MBSS extensible synchronization framework (Sec. 13.13.2 of IEEE Std. 802.11-2012). The framework is implemented via an ops table which defines the following functions: rx_bcn_presp() - this is called every time a mesh beacon is received. adjust_tbtt() - this is called immediately before a beacon is about to be transmitted. The default neighbor offset synchronization defined in the standard is implemented. We also provide template functions for vendor specific methods. When neighbor offset synchronization is active (which is the default) mesh neighbors in the same MBSS will track timing offsets to each other and compensate clock drift. In our tests we observed that this mesh synchronization implementation successfully corrected drifts between stations of ~2PPM while introducing a jitter of ~20us. It is also possible to test this framework on mac80211_hwsim simulated phys to see how it behaves under different topologies, over poor links, etc. Signed-off-by: Marco Porsch <marco.porsch@s2005.tu-chemnitz.de> Signed-off-by: Pavel Zubarev <pavel.zubarev@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: remove channel type argument from rate_updateJohannes Berg1-0/+2
The channel type argument to the rate_update() callback isn't really the correct way to give the rate control algorithm about the desired RX bandwidth of the peer. Remove this argument, and instead update the STA capabilities with 20/40 appropriately. The SMPS update done by this callback works in the same way, so this makes the callback cleaner. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: optimize aggregation session timeout handlingFelix Fietkau1-0/+4
Calling mod_timer from the rx/tx hotpath is somewhat expensive, and the timeout doesn't need to be so precise. Switch to a different strategy: Schedule the timer initially, store jiffies of all last rx/tx activity which would previously modify the timer, and let the timer re-arm itself after checking the last rx/tx timestamp. Make the session timers deferrable to avoid causing extra wakeups on systems running on battery. This visibly reduces CPU load under high network load on small embedded systems. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07mac80211: fix mesh airtime link metric estimatingThomas Pedersen1-0/+3
Airtime link metric estimation was broken in HT mesh, use cfg80211_calculate_bitrate to get the right rate value. Also factor out tx rate copying from sta_set_sinfo(). Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06mac80211: use compare_ether_addr on MAC addresses instead of memcmpFelix Fietkau1-1/+2
Because of the constant size and guaranteed 16 bit alignment, the inline compare_ether_addr function is much cheaper than calling memcmp. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-07mac80211: call rate control only after initJohannes Berg1-0/+2
There are situations where we don't have the necessary rate control information yet for station entries, e.g. when associating. This currently doesn't really happen due to the dummy station handling; explicitly disabling rate control when it's not initialised will allow us to remove dummy stations. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mac80211: remove dummy STA supportJohannes Berg1-29/+1
The dummy STA support was added because I didn't want to change the driver API at the time. Now that we have state transitions triggering station add/remove in the driver, we only call add once a station reaches ASSOCIATED, so we can remove the dummy station stuff again. While at it, tighten the RX check and accept only port control (EAP) frames from the AP station if it's not associated yet -- in other cases there's no race. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mac80211: add sta_state callbackJohannes Berg1-9/+0
(based on Eliad's patch) Add a callback to notify the low-level driver whenever the state of a station changes. The driver is only notified when the station is actually in the mac80211 hash table, not for pre-insert state transitions. To allow the driver to replace sta_add/remove calls with this, call extra transitions with the NOTEXIST state. This callback can fail, so we need to be careful in handling it when a station is inserted, particularly in the IBSS case where we still keep the station entry around for mac80211 purposes. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mac80211: add NOTEXIST station stateJohannes Berg1-0/+1
This will be used by drivers later if they need to have stations inserted all the time, in mac80211 has no purpose, is never used and sta_state starts out in NONE. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-31mac80211: station state transition error handlingJohannes Berg1-5/+12
In the future, when we start notifying drivers, state transitions could potentially fail. To make it easier to distinguish between programming bugs and driver failures: * rename sta_info_move_state() to sta_info_pre_move_state() which can only be called before the station is inserted (and check this with a new station flag). * rename sta_info_move_state_checked() to just plain sta_info_move_state(), as it will be the regular function that can fail for more than just one reason (bad transition or an error from the driver) This makes the programming model easier -- one of the functions can only be called before insertion and can't fail, the other can fail. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19cfg80211: Return beacon loss count in stationPaul Stewart1-0/+2
If station info contains a beacon loss count, return it to userspace. Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19mac80211: split addba retries in timeNikolay Martynov1-1/+5
Currently code allows three (HT_AGG_MAX_RETRIES) unanswered addba requests. When this limit is reached aggregation is turned off for given TID permanently. This doesn't seem right: three requests is not that much, some 'blackout' can happen, but effect of it affects whole connection indefinitely. This patch increases number of retries to 15. Also, when there have been 3 or more retries it splits further retries apart by 15 seconds instead of sending them in very short period of time. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15mac80211: make address arguments to sta_info_alloc constJohannes Berg1-1/+1
No real changes, just note that they are const. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15mac80211: refactor station state transitionsJohannes Berg1-0/+37
Station entries can have various states, the most important ones being auth, assoc and authorized. This patch prepares us for telling the driver about these states, we don't want to confuse drivers with strange transitions, so with this we enforce that they move in the right order between them (back and forth); some transitions might happen before the driver even knows about the station, but at least runtime transitions will be ordered correctly. As a consequence, IBSS and MESH stations will now have the ASSOC flag set (so they can transition to AUTHORIZED), and we can get rid of a special case in TX processing. When freeing a station, unwind the state so that other parts of the code (or drivers later) can rely on the transitions. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-01mac80211: remove unused function declarationMohammed Shafi Shajakhan1-1/+0
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28mac80211: timeout tx agg sessions in way similar to rx agg sessionsNikolay Martynov1-0/+2
Currently tx aggregation is not being timed out even if timeout is specified when aggregation is opened. Tx tid stays active until delba arrives from recipient (i.e. recipient times out tid when it is inactive). The problem with this approach is that delba can get lost in the air and tx tid will stay perpetually opened on the originator while closed on recipient thus all data sent via this tid will be lost. This patch implements tx tid timeouting in way very similar to rx tid timeouting. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-22mac80211: remove unused ASSOC_AP flagJohannes Berg1-2/+0
WLAN_STA_ASSOC_AP indicates that the station entry is for an AP we're associated to but isn't used so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-10mac80211: send unexpected 4addr eventJohannes Berg1-0/+8
Implement the cfg80211 notification but only send one event per associated station to avoid having tons of events if the station thinks it should be allowed to use 4addr frames but it isn't. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: optimise station flagsJohannes Berg1-70/+34
The flaglock in struct sta_info has long been something that I wanted to get rid of, this finally does the conversion to atomic bitops. The conversion itself is straight-forward in most places, a few things needed to change a bit since we can no longer use multiple bits at the same time. On x86-64, this is a fairly significant code size reduction: text data bss dec hex 427861 23648 1008 452517 6e7a5 before 425383 23648 976 450007 6ddd7 after Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: reply only once to each PS-pollJohannes Berg1-1/+1
If a PS-poll frame is retried (but was received) there is no way to detect that since it has no sequence number. As a consequence, the standard asks us to not react to PS-poll frames until the response to one made it out (was ACKed or lost). Implement this by using the WLAN_STA_SP flags to also indicate a PS-Poll "service period" and the IEEE80211_TX_STATUS_EOSP flag for the response packet to indicate the end of the "SP" as usual. We could use separate flags, but that will most likely completely confuse drivers, and while the standard doesn't exclude simultaneously polling using uAPSD and PS-Poll, doing that seems quite problematic. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: implement uAPSDJohannes Berg1-0/+8
Add uAPSD support to mac80211. This is probably not possible with all devices, so advertising it with the cfg80211 flag will be left up to drivers that want it. Due to my previous patches it is now a fairly straight-forward extension. Drivers need to have accurate TX status reporting for the EOSP frame. For drivers that buffer themselves, the provided APIs allow releasing the right number of frames, but then drivers need to set EOSP and more-data themselves. This is documented in more detail in the new code itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: split PS buffers into ACsJohannes Berg1-12/+12
For uAPSD support we'll need to have per-AC PS buffers. As this is a major undertaking, split the buffers before really adding support for uAPSD. This already makes some reference to the uapsd_queues variable, but for now that will never be non-zero. Since book-keeping is complicated, also change the logic for keeping a maximum of frames only and allow 64 frames per AC (up from 128 for a station). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: unify TIM bit handlingJohannes Berg1-2/+1
Currently, the TIM bit for a given station is set and cleared all over the place. Since the logic to set/clear it will become much more complex when we add uAPSD support, as a first step let's collect the entire logic in one place. This requires a few small adjustments to other places. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: data path modification for TDLS peersArik Nemtsov1-1/+4
Mark the STA entries of enabled TDLS peers with a new "peer authorized" flag. During link setup, allow special TDLS setup frames through the AP, but otherwise drop all packets destined to the peer. This is required by the TDLS (802.11z) specification in order to prevent reordering of MSDUs between the AP and direct paths. When setup completes and the peer is authorized, send data directly, bypassing the AP. In the Rx path, allow data to be received directly from TDLS peers. Signed-off-by: Arik Nemtsov <arik@wizery.com> Cc: Kalyan C Gaddam <chakkal@iit.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30nl80211/mac80211: allow adding TDLS peers as stationsArik Nemtsov1-0/+2
When adding a TDLS peer STA, mark it with a new flag in both nl80211 and mac80211. Before adding a peer, make sure the wiphy supports TDLS and our operating mode is appropriate (managed). In addition, make sure all peers are removed on disassociation. A TDLS peer is first added just before link setup is initiated. In later setup stages we have more info about peer supported rates, capabilities, etc. This info is reported via nl80211_set_station(). Signed-off-by: Arik Nemtsov <arik@wizery.com> Cc: Kalyan C Gaddam <chakkal@iit.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13mac80211: retry sending failed BAR frames later instead of tearing down aggrFelix Fietkau1-0/+5
Unfortunately failed BAR tx attempts happen more frequently than I expected, and the resulting aggregation teardowns cause performance issues, as the aggregation session does not always get re-established properly. Instead of tearing down the entire aggr session, we can simply store the SSN of the last failed BAR tx attempt, wait for the first successful tx status event, and then send another BAR with the same SSN. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-26mac80211: fix race condition between assoc_done and first EAP packetGuy Eilam1-1/+29
When associating to an AP, the station might miss the first EAP packet that the AP sends due to a race condition between the association success procedure and the rx flow in mac80211. In such cases, the packet might fall in ieee80211_rx_h_check due to the fact that the relevant rx->sta wasn't allocated yet. Allocation of the relevant station info struct before actually sending the association request and setting it with a new dummy_sta flag solve this problem. The station will accept only EAP packets from the AP while it is in the pre-association/dummy state. This dummy station entry is not seen by normal sta_info_get() calls, only by sta_info_get_bss_rx(). The driver is not notified for the first insertion of the dummy station. The driver is notified only after the association is complete and the dummy flag is removed from the station entry. That way, all the rest of the code flow should be untouched by this change. Signed-off-by: Guy Eilam <guy@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08mac80211: simplify RX PN/IV handlingJohannes Berg1-1/+2
The current rx->queue value is slightly confusing. It is set to 16 on non-QoS frames, including data, and then used for sequence number and PN/IV checks. Until recently, we had a TKIP IV checking bug that had been introduced in 2008 to fix a seqno issue. Before that, we always used TID 0 for checking the PN or IV on non-QoS packets. Go back to the old status for PN/IV checks using the TID 0 counter for non-QoS by splitting up the rx->queue value into "seqno_idx" and "security_idx" in order to avoid confusion in the future. They each have special rules on the value used for non- QoS data frames. Since the handling is now unified, also revert the special TKIP handling from my patch "mac80211: fix TKIP replay vulnerability". Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07mac80211: Stop BA session event from deviceShahar Levi1-0/+3
Some devices support BT/WLAN co-existence algorigthms. In order not to harm the system performance and user experience, the device requests not to allow any RX BA session and tear down existing RX BA sessions based on system constraints such as periodic BT activity that needs to limit WLAN activity (eg.SCO or A2DP). In such cases, the intention is to limit the duration of the RX PPDU and therefore prevent the peer device to use A-MPDU aggregation. Adding ieee80211_stop_rx_ba_session() callback that can be used by the driver to stop existing BA sessions. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16nl80211: Move peer link state definition to nl80211Javier Cardona1-3/+3
These definitions need to be exposed now that we can set the peer link states via NL80211_ATTR_STA_PLINK_STATE. They were already being (opaquely) reported by NL80211_STA_INFO_PLINK_STATE. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16mac80211: sparse RCU annotationsJohannes Berg1-5/+12
This adds sparse RCU annotations to most of mac80211, only the mesh code remains to be done. Due the the previous patches, the annotations are pretty simple. The only thing that this actually changes is removing the RCU usage of key->sta in debugfs since this pointer isn't actually an RCU-managed pointer (it only has a single assignment done before the key even goes live). As that is otherwise harmless, I decided to make it part of this patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16mac80211: fix TX a-MPDU lockingJohannes Berg1-0/+4
During my quest to make mac80211 not have any RCU warnings from sparse, I came across the a-MPDU code again and it wasn't quite clear why it isn't racy. So instead of assigning the tid_tx array with just the spinlock held in ieee80211_start_tx_ba_session use a separate temporary array protected only by the spinlock and protect all assignments to the "live" array by both the spinlock and the mutex so that other code is easily verified to be correct. Due to pointer assignment atomicity I don't think this is a real issue, but I'm not sure, especially on Alpha the current code might be problematic. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>