summaryrefslogtreecommitdiff
path: root/net/mac80211/mlme.c
AgeCommit message (Collapse)AuthorFilesLines
2019-07-29mac80211: don't WARN on short WMM parameters from APBrian Norris1-0/+10
In a very similar spirit to commit c470bdc1aaf3 ("mac80211: don't WARN on bad WMM parameters from buggy APs"), an AP may not transmit a fully-formed WMM IE. For example, it may miss or repeat an Access Category. The above loop won't catch that and will instead leave one of the four ACs zeroed out. This triggers the following warning in drv_conf_tx() wlan0: invalid CW_min/CW_max: 0/0 and it may leave one of the hardware queues unconfigured. If we detect such a case, let's just print a warning and fall back to the defaults. Tested with a hacked version of hostapd, intentionally corrupting the IEs in hostapd_eid_wmm(). Cc: stable@vger.kernel.org Signed-off-by: Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20190726224758.210953-1-briannorris@chromium.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-3/+22
Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
2019-07-09Merge branch 'linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 5.3: API: - Test shash interface directly in testmgr - cra_driver_name is now mandatory Algorithms: - Replace arc4 crypto_cipher with library helper - Implement 5 way interleave for ECB, CBC and CTR on arm64 - Add xxhash - Add continuous self-test on noise source to drbg - Update jitter RNG Drivers: - Add support for SHA204A random number generator - Add support for 7211 in iproc-rng200 - Fix fuzz test failures in inside-secure - Fix fuzz test failures in talitos - Fix fuzz test failures in qat" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits) crypto: stm32/hash - remove interruptible condition for dma crypto: stm32/hash - Fix hmac issue more than 256 bytes crypto: stm32/crc32 - rename driver file crypto: amcc - remove memset after dma_alloc_coherent crypto: ccp - Switch to SPDX license identifiers crypto: ccp - Validate the the error value used to index error messages crypto: doc - Fix formatting of new crypto engine content crypto: doc - Add parameter documentation crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR crypto: arm64/aes-ce - add 5 way interleave routines crypto: talitos - drop icv_ool crypto: talitos - fix hash on SEC1. crypto: talitos - move struct talitos_edesc into talitos.h lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE crypto/NX: Set receive window credits to max number of CRBs in RxFIFO crypto: asymmetric_keys - select CRYPTO_HASH where needed crypto: serpent - mark __serpent_setkey_sbox noinline crypto: testmgr - dynamically allocate crypto_shash crypto: testmgr - dynamically allocate testvec_config crypto: talitos - eliminate unneeded 'done' functions at build time ...
2019-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+1
Minor SPDX change conflict. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-21Merge tag 'spdx-5.2-rc6' of ↵Linus Torvalds1-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull still more SPDX updates from Greg KH: "Another round of SPDX updates for 5.2-rc6 Here is what I am guessing is going to be the last "big" SPDX update for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that were "easy" to determine by pattern matching. The ones after this are going to be a bit more difficult and the people on the spdx list will be discussing them on a case-by-case basis now. Another 5000+ files are fixed up, so our overall totals are: Files checked: 64545 Files with SPDX: 45529 Compared to the 5.1 kernel which was: Files checked: 63848 Files with SPDX: 22576 This is a huge improvement. Also, we deleted another 20000 lines of boilerplate license crud, always nice to see in a diffstat" * tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485 ...
2019-06-20net/mac80211: move WEP handling to ARC4 library interfaceArd Biesheuvel1-1/+2
The WEP code in the mac80211 subsystem currently uses the crypto API to access the arc4 (RC4) cipher, which is overly complicated, and doesn't really have an upside in this particular case, since ciphers are always synchronous and therefore always implemented in software. Given that we have no accelerated software implementations either, it is much more straightforward to invoke a generic library interface directly. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+11
Honestly all the conflicts were simple overlapping changes, nothing really interesting to report. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14mac80211: use STA info in rate_control_send_low()Johannes Berg1-1/+6
Even if we have a station, we currently call rate_control_send_low() with the NULL station unless further rate control (driver, minstrel) has been initialized. Change this so we can use more information about the station to use a better rate. For example, when we associate with an AP, we will now use the lowest rate it advertised as supported (that we can) rather than the lowest mandatory rate. This aligns our behaviour with most other 802.11 implementations. To make this possible, we need to also ensure that we have non-zero rates at all times, so in case we really have *nothing* pre-fill the supp_rates bitmap with the very lowest mandatory bitmap (11b and 11a on 2.4 and 5 GHz respectively). Additionally, hostapd appears to be giving us an empty supported rates bitmap (it can and should do better, since the STA must have supported for at least the basic rates in the BSS), so ignore any such bitmaps that would actually zero out the supp_rates, and in that case just keep the pre-filled mandatory rates. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14mac80211: dynamically enable the TWT requester support on STA interfacesJohn Crispin1-2/+16
Turn TWT for STA interfaces when they associate and/or receive a beacon where the twt_responder bit has changed. Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-05-24mac80211: handle deauthentication/disassociation from TDLS peerYu Wang1-1/+11
When receiving a deauthentication/disassociation frame from a TDLS peer, a station should not disconnect the current AP, but only disable the current TDLS link if it's enabled. Without this change, a TDLS issue can be reproduced by following the steps as below: 1. STA-1 and STA-2 are connected to AP, bidirection traffic is running between STA-1 and STA-2. 2. Set up TDLS link between STA-1 and STA-2, stay for a while, then teardown TDLS link. 3. Repeat step #2 and monitor the connection between STA and AP. During the test, one STA may send a deauthentication/disassociation frame to another, after TDLS teardown, with reason code 6/7, which means: Class 2/3 frame received from nonassociated STA. On receive this frame, the receiver STA will disconnect the current AP and then reconnect. It's not a expected behavior, purpose of this frame should be disabling the TDLS link, not the link with AP. Cc: stable@vger.kernel.org Signed-off-by: Yu Wang <yyuwang@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211/cfg80211: update bss channel on channel switchSergey Matyukevich1-3/+0
FullMAC STAs have no way to update bss channel after CSA channel switch completion. As a result, user-space tools may provide inconsistent channel info. For instance, consider the following two commands: $ sudo iw dev wlan0 link $ sudo iw dev wlan0 info The latter command gets channel info from the hardware, so most probably its output will be correct. However the former command gets channel info from scan cache, so its output will contain outdated channel info. In fact, current bss channel info will not be updated until the next [re-]connect. Note that mac80211 STAs have a workaround for this, but it requires access to internal cfg80211 data, see ieee80211_chswitch_work: /* XXX: shouldn't really modify cfg80211-owned data! */ ifmgd->associated->channel = sdata->csa_chandef.chan; This patch suggests to convert mac80211 workaround into cfg80211 behavior and to update current bss channel in cfg80211_ch_switch_notify. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: ignore quiet mode in probeSara Sharon1-3/+3
Some buggy APs keep the CSA IE in probes after the channel switch was completed and can silence us for no good reason. Apply quiet mode only from beacons. If there is real channel switch going on, we will see the beacon anyway. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: allow CSA to self with immediate quietSara Sharon1-1/+2
Currently, due to some buggy APs that continue to include CSA IEs after the switch, we ignore CSA to same channel. However, some other APs may do CSA to self in order to have immediate quiet. Allow it. Do it only for beacons. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: notify driver on subsequent CSA beaconsSara Sharon1-11/+16
Some drivers may want to track further the CSA beacons, for example to compensate for buggy APs that change the beacon count or quiet mode during CSA flow. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: abort CSA if beacon does not include CSA IEsSara Sharon1-6/+37
In case we receive a beacon without CSA IE while we are in the middle of channel switch - abort the operation. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: support max channel switch time elementSara Sharon1-0/+1
2018 REVmd of the spec introduces the max channel switch time element which is optionally included in beacons/probes when there is a channel switch / extended channel switch element. The value represents the maximum delay between the time the AP transmitted the last beacon in current channel and the expected time of the first beacon in the new channel, in TU. Parse the value and pass it to the driver. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22cfg80211: Report Association Request frame IEs in association eventsJouni Malinen1-2/+12
This extends the NL80211_CMD_ASSOCIATE event case to report NL80211_ATTR_REQ_IE similarly to what is already done with the NL80211_CMD_CONNECT events if the driver provides this information. In practice, this adds (Re)Association Request frame information element reporting to mac80211 drivers for the cases where user space SME is used. This provides more information for user space to figure out which capabilities were negotiated for the association. For example, this can be used to determine whether HT, VHT, or HE is used. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08mac80211: indicate support for multiple BSSIDSara Sharon1-0/+15
Set multi-bssid support flags according to driver support. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08mac80211: support multi-bssidSara Sharon1-37/+88
Add support for multi-bssid. This includes: - Parsing multi-bssid element - Overriding DTIM values - Taking into account in various places the inner BSSID instead of transmitter BSSID - Save aside some multi-bssid properties needed by drivers Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08mac80211: pass bssids to elements parsing functionSara Sharon1-19/+26
In multiple BSSID, we have nested IEs inside the multiple BSSID IE, that override the external ones for that specific BSS. As preparation for supporting that, pass 2 BSSIDs to the parse function, the transmitter, and the selected BSSID, so it can know which IEs to choose. If the selected BSSID is NULL, the outer ones will be applied. Change ieee80211_bss_info_update to parse elements itself, instead of receiving them parsed, so we have the relevant bss entry in hand. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-19Merge tag 'mac80211-next-for-davem-2018-12-19' of ↵David S. Miller1-14/+39
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time we have too many changes to list, highlights: * virt_wifi - wireless control simulation on top of another network interface * hwsim configurability to test capabilities similar to real hardware * various mesh improvements * various radiotap vendor data fixes in mac80211 * finally the nl_set_extack_cookie_u64() we talked about previously, used for * peer measurement APIs, right now only with FTM (flight time measurement) for location * made nl80211 radio/interface announcements more complete * various new HE (802.11ax) things: updates, TWT support, ... ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18mac80211: do not advertise HE cap IE if HE disabledShaul Triebitz1-10/+9
When disabling HE due to the lack of HT/VHT, do it at an earlier stage to avoid advertising HE capabilities IE. Also, at this point, no need to check if AP supports HE, since it is already checked earlier (in ieee80211_prep_channel). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18mac80211: set STA flag DISABLE_HE if HE is not supportedShaul Triebitz1-2/+4
Up until now, the IEEE80211_STA_DISABLE_HE flag was set only based on whether the AP has advertised HE capabilities. This flag should be set also if STA does not support HE (regardless of the AP support). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18mac80211: update driver when MU EDCA params changeShaul Triebitz1-2/+10
Similar to WMM IE, if MU_EDCA IE parameters changed (or ceased to exist) tell the Driver about it. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18mac80211: propagate the support for TWT to the driverEmmanuel Grumbach1-0/+16
TWT is a feature that was added in 11ah and enhanced in 11ax. There are two bits that need to be set if we want to use the feature in 11ax: one in the HE Capability IE and one in the Extended Capability IE. This is because of backward compatibility between 11ah and 11ax. In order to simplify the flow for the low level driver in managed mode, aggregate the two bits and add a boolean that tells whether TWT is supported or not, but only if 11ax is supported. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09mac80211: fix missing unlock on error in ieee80211_mark_sta_auth()Wei Yongjun1-4/+8
Add the missing unlock before return from function ieee80211_mark_sta_auth() in the error handling case. Cc: stable@vger.kernel.org Fixes: fc107a933071 ("mac80211: Helper function for marking STA authenticated") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> [use result variable/label instead of duplicating] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-11mac80211: Extend SAE authentication in infra BSS STA modeJouni Malinen1-23/+47
Previous implementation of SAE authentication in infrastructure BSS was somewhat restricting and not exactly clean way of handling the two auth() operations. This ended up removing and re-adding the STA entry for the AP in the middle of authentication and also messing up authentication state tracking through the sequence of four Authentication frames. Furthermore, this did not work if the AP ended up sending out SAE Confirm (auth trans #2) immediately after SAE Commit (auth trans #1) before the station had time to transmit its SAE Confirm. Clean up authentication state handling for the SAE case to allow two rounds of auth() calls without dropping all state between those operations. Track peer Confirmed status and mark authentication completed only once both ends have confirmed. ieee80211_mgd_auth() check for EBUSY cases is now handling only the pending association (ifmgd->assoc_data) while all pending authentication (ifmgd->auth_data) cases are allowed to proceed to allow user space to start a new connection attempt from scratch even if the previously requested authentication is still waiting completion. This is needed to avoid making SAE error cases with retries take excessive amount of time with no means for the user space to stop that (apart from setting the netdev down). As an extra bonus, the end of ieee80211_rx_mgmt_auth() can be cleaned up to avoid the extra copy of the cfg80211_rx_mlme_mgmt() call for ongoing SAE authentication since the new ieee80211_mark_sta_auth() helper function can handle both completion of authentication and updates to the STA entry under the same condition and there is no need to return from the function between those operations. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-11mac80211: Move ieee80211_mgd_auth() EBUSY check to be before allocationJouni Malinen1-7/+4
This makes it easier to conditionally replace full allocation of auth_data to use reallocation for the case of continuing SAE authentication. Furthermore, there was not really any point in having this check done so late in the function after having already completed number of steps that cannot be used anyway in the error case. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-11mac80211: Helper function for marking STA authenticatedJouni Malinen1-12/+22
Authentication exchange can be completed in both TX and RX paths for SAE, so move this common functionality into a helper function to avoid having to implement practically the same operations in two places when extending SAE implementation in the following commits. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-05mac80211: fix saving a few HE valuesNaftali Goldstein1-10/+7
After masking the he_oper_params, to get the requested values as integers one must rshift and not lshift. Fix that by using the le32_get_bits() macro. Fixes: 41cbb0f5a295 ("mac80211: add support for HE") Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> [converted to use le32_get_bits()] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-05mac80211: add ability to parse CCFS2Johannes Berg1-2/+4
With newer VHT implementations, it's necessary to look at the HT operation's CCFS2 field to identify the actual bandwidth used. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-04Merge tag 'mac80211-for-davem-2018-09-03' of ↵David S. Miller1-2/+68
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Here are quite a large number of fixes, notably: * various A-MSDU building fixes (currently only affects mt76) * syzkaller & spectre fixes in hwsim * TXQ vs. teardown fix that was causing crashes * embed WMM info in reg rule, bad code here had been causing crashes * one compilation issue with fix from Arnd (rfkill-gpio includes) * fixes for a race and bad data during/after channel switch * nl80211: a validation fix, attribute type & unit fixes along with other small fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03mac80211: don't Tx a deauth frame if the AP forbade TxEmmanuel Grumbach1-2/+15
If the driver fails to properly prepare for the channel switch, mac80211 will disconnect. If the CSA IE had mode set to 1, it means that the clients are not allowed to send any Tx on the current channel, and that includes the deauthentication frame. Make sure that we don't send the deauthentication frame in this case. In iwlwifi, this caused a failure to flush queues since the firmware already closed the queues after having parsed the CSA IE. Then mac80211 would wait until the deauthentication frame would go out (drv_flush(drop=false)) and that would never happen. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-03mac80211: Fix station bandwidth setting after channel switchIlan Peer1-0/+53
When performing a channel switch flow for a managed interface, the flow did not update the bandwidth of the AP station and the rate scale algorithm. In case of a channel width downgrade, this would result with the rate scale algorithm using a bandwidth that does not match the interface channel configuration. Fix this by updating the AP station bandwidth and rate scaling algorithm before the actual channel change in case of a bandwidth downgrade, or after the actual channel change in case of a bandwidth upgrade. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-29mac80211: remove unnecessary NULL checkJohannes Berg1-2/+1
We don't need to check if he_oper is NULL before calling ieee80211_verify_sta_he_mcs_support() as it - now - will correctly check this itself. Remove the redundant check. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-29mac80211: fix potential null pointer dereferenceGustavo A. R. Silva1-1/+3
he_op is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after he_op has been properly null checked. Notice that, currently, he_op is already being null checked before calling this function at 4593: 4593 if (!he_oper || 4594 !ieee80211_verify_sta_he_mcs_support(sband, he_oper)) 4595 ifmgd->flags |= IEEE80211_STA_DISABLE_HE; but in case ieee80211_verify_sta_he_mcs_support is ever called without verifying he_oper is not null, we will end up having a null pointer dereference. So, we better don't take any chances. Addresses-Coverity-ID: 1470068 ("Dereference before null check") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-18mac80211: add support for HELuca Coelho1-17/+271
Add support for HE in mac80211 conforming with P802.11ax_D1.4. Johannes: Fix another bug with the buf_size comparison in agg-rx.c. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-15mac80211: split ieee80211_send_probe_req()Johannes Berg1-5/+17
This function is passed many more parameters in the scan case than in the MLME case, and differentiates the two cases inside. Split it up and make both versions static to simplify things. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2018-06-15mac80211: add probe request building flagsJohannes Berg1-2/+3
Add flags to pass through to probe request building and change the "bool directed" to be one of them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2018-05-23mac80211: Support adding duration for prepare_tx() callbackIlan Peer1-6/+11
There are specific cases, such as SAE authentication exchange, that might require long duration to complete. For such cases, add support for indicating to the driver the required duration of the prepare_tx() operation, so the driver would still be able to complete the frame exchange. Currently, indicate the duration only for SAE authentication exchange, as SAE authentication can take up to 2000 msec (as defined in IEEE P802.11-REVmd D1.0 p. 3504). As the patch modified the prepare_tx() callback API, also modify the relevant code in iwlwifi. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-07mac80211: Adjust SAE authentication timeoutIlan Peer1-7/+18
The IEEE P802.11-REVmd D1.0 specification updated the SAE authentication timeout to be 2000 milliseconds (see dot11RSNASAERetransPeriod). Update the SAE timeout setting accordingly. While at it, reduce some code duplication in the timeout configuration. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-04-19mac80211: Fix condition validating WMM IEIlan Peer1-1/+1
Commit c470bdc1aaf3 ("mac80211: don't WARN on bad WMM parameters from buggy APs") handled cases where an AP reports a zeroed WMM IE. However, the condition that checks the validity accessed the wrong index in the ieee80211_tx_queue_params array, thus wrongly deducing that the parameters are invalid. Fix it. Fixes: c470bdc1aaf3 ("mac80211: don't WARN on bad WMM parameters from buggy APs") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29Merge tag 'mac80211-next-for-davem-2018-03-29' of ↵David S. Miller1-77/+91
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== We have a fair number of patches, but many of them are from the first bullet here: * EAPoL-over-nl80211 from Denis - this will let us fix some long-standing issues with bridging, races with encryption and more * DFS offload support from the qtnfmac folks * regulatory database changes for the new ETSI adaptivity requirements * various other fixes and small enhancements ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29mac80211: don't WARN on bad WMM parameters from buggy APsEmmanuel Grumbach1-1/+2
Apparently, some APs are buggy enough to send a zeroed WMM IE. Don't WARN on this since this is not caused by a bug on the client's system. This aligns the condition of the WARNING in drv_conf_tx with the validity check in ieee80211_sta_wmm_params. We will now pick the default values whenever we get a zeroed WMM IE. This has been reported here: https://bugzilla.kernel.org/show_bug.cgi?id=199161 Fixes: f409079bb678 ("mac80211: sanity check CW_min/CW_max towards driver") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29mac80211: Send control port frames over nl80211Denis Kenzior1-0/+2
If userspace requested control port frames to go over 80211, then do so. The control packets are intercepted just prior to delivery of the packet to the underlying network device. Pre-authentication type frames (protocol: 0x88c7) are also forwarded over nl80211. Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29mac80211: remove shadowing duplicated variableJohannes Berg1-2/+0
We already have 'ifmgd' here, and it's already assigned to the same value, so remove the duplicate. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29mac80211: limit wmm params to comply with ETSI requirementsHaim Dreyfuss1-0/+1
ETSI has recently added new requirements that restrict the WMM parameter values for 5GHz frequencies. We need to take care of the following scenarios in order to comply with these new requirements: 1. When using mac80211 default values; 2. When the userspace tries to configure its own values; 3. When associating to an AP which advertises WWM IE. When associating to an AP, the client uses the values in the advertised WMM IE. But the AP may not comply with the new ETSI requirements, so the client needs to check the current regulatory rules and use those limits accordingly. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-21mac80211: inform wireless layer when frame RSSI is invalidTosoni1-74/+86
When the low-level driver returns an invalid RSSI indication, set the signal value to 0 as an indication to the upper layer. Also, skip average level computation if signal is invalid. Signed-off-by: Jean Pierre TOSONI <jp.tosoni@acksys.fr> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-21 05:41:33 +0300