summaryrefslogtreecommitdiff
path: root/net/mac80211/agg-tx.c
AgeCommit message (Collapse)AuthorFilesLines
2013-01-24mac80211: fix aggregation state with current driversJohannes Berg1-7/+10
For drivers that don't actually flush their queues when aggregation stop with the IEEE80211_AMPDU_TX_STOP_FLUSH or IEEE80211_AMPDU_TX_STOP_FLUSH_CONT reasons is done, like iwlwifi or iwlegacy, mac80211 can then transmit on a TID that the driver still considers busy. This happens in the following way: - IEEE80211_AMPDU_TX_STOP_FLUSH requested - driver marks TID as emptying - mac80211 removes tid_tx data, this can copy packets to the TX pending queues and also let new packets through to the driver - driver gets unexpected TX as it wasn't completely converted to the new API In iwlwifi, this lead to the following warning: WARNING: at drivers/net/wireless/iwlwifi/dvm/tx.c:442 iwlagn_tx_skb+0xc47/0xce0 Tx while agg.state = 4 Modules linked in: [...] Pid: 0, comm: kworker/0:0 Tainted: G W 3.1.0 #1 Call Trace: [<c1046e42>] warn_slowpath_common+0x72/0xa0 [<c1046f13>] warn_slowpath_fmt+0x33/0x40 [<fddffa17>] iwlagn_tx_skb+0xc47/0xce0 [iwldvm] [<fddfcaa3>] iwlagn_mac_tx+0x23/0x40 [iwldvm] [<fd8c98b6>] __ieee80211_tx+0xf6/0x3c0 [mac80211] [<fd8cbe00>] ieee80211_tx+0xd0/0x100 [mac80211] [<fd8cc176>] ieee80211_xmit+0x96/0xe0 [mac80211] [<fd8cc578>] ieee80211_subif_start_xmit+0x348/0xc80 [mac80211] [<c1445207>] dev_hard_start_xmit+0x337/0x6d0 [<c145eee9>] sch_direct_xmit+0xa9/0x210 [<c14462c0>] dev_queue_xmit+0x1b0/0x8e0 Fortunately, solving this problem is easy as the station is being destroyed, so such transmit packets can only happen due to races. Instead of trying to close the race just let the race not reach the drivers by making two changes: 1) remove the explicit aggregation session teardown in the managed mode code, the same thing will be done when the station is removed, in __sta_info_destroy. 2) When aggregation stop with AGG_STOP_DESTROY_STA is requested, leave the tid_tx data around as stopped. It will be cleared and freed in cleanup_single_sta later, but until then any racy packets will be put onto the tid_tx pending queue instead of transmitted which is fine since the station is being removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-19mac80211: improve aggregation debug messagesJohannes Berg1-17/+27
A lot of the aggregation messages don't indicate the station so they're hard to understand if there are multiple sessions in progress. Make that easier by adding the MAC address to most messages. Also add the TID if it wasn't already there. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: split TX aggregation stop actionJohannes Berg1-5/+35
When TX aggregation is stopped, there are a few different cases: - connection with the peer was dropped - session stop was requested locally - session stop was requested by the peer - connection was dropped while a session is stopping The behaviour in these cases should be different, if the connection is dropped then the driver should drop all frames, otherwise the frames may continue to be transmitted, aggregated in the case of a locally requested session stop or unaggregated in the case of the peer requesting session stop. Split these different cases so that the driver can act accordingly; however, treat local and remote stop the same way and ask the driver to not send frames as aggregated packets any more. In the case of connection drop, the stop callback the driver is otherwise supposed to call is no longer required. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: move ieee80211_remove_tid_tx functionJohannes Berg1-103/+103
To call it from ___ieee80211_stop_tx_ba_session, move the function and dependencies up. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: split out aggregation TX removalJohannes Berg1-18/+30
Create the function ieee80211_remove_tid_tx to call it from ___ieee80211_stop_tx_ba_session later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: split aggregation stop by reasonJohannes Berg1-9/+8
The initiator/tx doesn't really identify why an aggregation session is stopped, give a reason for stopping that more clearly identifies what's going on. This will help tell the driver clearly what is expected of it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-07mac80211: warn only once if ampdu_action isn't assignedChaitanya1-1/+1
New drivers that might not support ampdu_action yet while in development cause a lot of warnings, use WARN_ON_ONCE instead. Signed-off-by: T Krushna Chaitanya <chaitanyatk@posedge.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19mac80211: introduce IEEE80211_NUM_TIDS and use itJohannes Berg1-6/+6
Introduce IEEE80211_NUM_TIDS in the generic 802.11 header file and use it in place of STA_TID_NUM and NUM_RX_DATA_QUEUES which are both really the number of TIDs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-21mac80211: don't send delBA on addBA failureJohannes Berg1-1/+1
There's no reason to send a delBA when the peer refused our addBA, so change that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-07mac80211: request TX status for BlockAck RequestsChristian Lamparter1-1/+2
Because ieee80211_tx_status in status.c checks if outgoing BlockAck requests have been acked, it is necessary to tell the driver that tx feedback for this sort of frame is important. Otherwise, the stack will continue to send the same BlockAck request over and over, which can cause the receiver to flush or clean its reorder buffer over and over. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-24mac80211: clean up debuggingJohannes Berg1-31/+41
There are a few things that make the logging and debugging in mac80211 less useful than it should be right now: * a lot of messages should be pr_info, not pr_debug * wholesale use of pr_debug makes it require *both* Kconfig and dynamic configuration * there are still a lot of ifdefs * the style is very inconsistent, sometimes the sdata->name is printed in front Clean up everything, introducing new macros and separating out the station MLME debugging into a new Kconfig symbol. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-05net: mac80211: Add and use ht_vdbg debugging macroJoe Perches1-74/+29
Simplify the use of #ifdef CONFIG_MAC80211_HT_DEBUG/#endif by adding a logging macro to encapsulate the test. Convert the appropriate uses too. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05net: mac80211: Convert printk(KERN_DEBUG to pr_debugJoe Perches1-38/+30
Standardize the debugging to be able to use dynamic_debug. Coalesce formats, align arguments. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mac80211: fix TX aggregation session timerJohannes Berg1-2/+8
In commit 12d3952fc4a1cd96234bc7023bf7eefeb0bb6355 ("mac80211: optimize aggregation session timeout handling") two bugs were introduced: 1) RCU usage was completely broken since no locks are held 2) the timer must not rearm when agg session is stopping Reported-and-tested-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mac80211: add improved HW queue controlJohannes Berg1-19/+20
mac80211 currently only supports one hardware queue per AC. This is already problematic for off-channel uses since if we go off channel while the BE queue is full and then try to send an off-channel frame the frame will never go out. This will become worse when we support multi-channel since then a queue on one channel might be full, but we have to stop the software queue for all channels. That is obviously not desirable. To address this problem allow drivers to register more hardware queues, and allow them to map them to virtual interfaces. When they stop a hardware queue the corresponding AC software queues on the correct interfaces will be stopped as well. Additionally, there's an off-channel queue to solve that problem and a per-interface after-DTIM beacon queue. This allows drivers to manage software queues closer to how the hardware works. Currently, there's a limit of 16 hardware queues. This may or may not be sufficient, we can adjust it as needed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: optimize aggregation session timeout handlingFelix Fietkau1-2/+16
Calling mod_timer from the rx/tx hotpath is somewhat expensive, and the timeout doesn't need to be so precise. Switch to a different strategy: Schedule the timer initially, store jiffies of all last rx/tx activity which would previously modify the timer, and let the timer re-arm itself after checking the last rx/tx timestamp. Make the session timers deferrable to avoid causing extra wakeups on systems running on battery. This visibly reduces CPU load under high network load on small embedded systems. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19mac80211: split addba retries in timeNikolay Martynov1-0/+19
Currently code allows three (HT_AGG_MAX_RETRIES) unanswered addba requests. When this limit is reached aggregation is turned off for given TID permanently. This doesn't seem right: three requests is not that much, some 'blackout' can happen, but effect of it affects whole connection indefinitely. This patch increases number of retries to 15. Also, when there have been 3 or more retries it splits further retries apart by 15 seconds instead of sending them in very short period of time. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15mac80211: Use appropriate TID for sending BAR, ADDBA and DELBA framesHelmut Schaa1-2/+2
Currently BAR, ADDBA and DELBA frames are always sent using AC_VO. If the TID for which a BA session is established is assigned to a different queue BAR, ADDBA and DELBA frames can "overtake" frames of the according BA session. Hence, always put BA session related frames into the same queue as the BA sessions data frames. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14Merge branch 'master' of ↵John W. Linville1-45/+41
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c
2011-12-14mac80211: Purge A-MPDU TX queues before station destructionsYogesh Ashok Powar1-0/+2
When a station leaves suddenly while ampdu traffic to that station is still running, there is a possibility that the ampdu pending queues are not freed due to a race condition leading to memory leaks. In '__sta_info_destroy' when we attempt to destroy the ampdu sessions in 'ieee80211_sta_tear_down_BA_sessions', the driver calls 'ieee80211_stop_tx_ba_cb_irqsafe' to delete the ampdu structures (tid_tx) and splice the pending queues and this job gets queued in sdata workqueue. However, the sta entry can get destroyed before the above work gets scheduled and hence the race. Purging the queues and freeing the tid_tx to avoid the leak. The better solution would be to fix the race, but that can be taken up in a separate patch. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-08mac80211: fix another race in aggregation startJohannes Berg1-45/+41
Emmanuel noticed that when mac80211 stops the queues for aggregation that can leave a packet pending. This packet will be given to the driver after the AMPDU callback, but as a non-aggregated packet which messes up the sequence number etc. I also noticed by looking at the code that if packets are being processed while we clear the WANT_START bit, they might see it cleared already and queue up on tid_tx->pending. If the driver then rejects the new aggregation session we leak the packet. Fix both of these issues by changing this code to not stop the queues at all. Instead, let packets queue up on the tid_tx->pending queue instead of letting them get to the driver, and add code to recover properly in case the driver rejects the session. (The patch looks large because it has to move two functions to before their new use.) Cc: stable@vger.kernel.org Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07mac80211: Add HT operation modes for IBSSAlexander Simon1-1/+4
The HT mode is set by iw (previous patchsets). The interface is set into the specified HT mode. HT mode and capabilities are announced in beacons. If we add a station that uses HT also, the fastest matching HT mode will be used for transmission. That means if we are using HT40+ and we add a station running on HT40-, we would transfer at HT20. If we join an IBSS with HT40, but the secondary channel is not available, we will fall back into HT20 as well. Allow frame aggregation to start in IBSS mode. Signed-off-by: Alexander Simon <an.alexsimon@googlemail.com> [siwu@hrz.tu-chemnitz.de: Updates] * remove implicit channel_type enum assumptions * use rate_control_rate_init() if channel type changed * remove channel flags check * activate HT IBSS feature support * slightly reword commit message * rebase on wireless-testing Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07mac80211: handle protection mode, RIFS and ADDBA for HT IBSSSimon Wunderlich1-0/+21
* Follow 802.11n-2009 9.13.3.1 for protection mode and ADDBA * Send ADDBA only to HT STAs - implement 11.5.1.1 partially Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-03Merge branch 'master' of ↵John W. Linville1-3/+39
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/libertas/cfg.c
2011-11-28mac80211: do not pass AP VLAN vif pointers to driversFelix Fietkau1-2/+2
This fixes frequent WARN_ONs when using AP VLAN + aggregation, as these vifs are virtual and not registered with drivers. Use sta_info_get_bss instead of sta_info_get in aggregation callbacks, so that these callbacks can find the station entry when called with the AP vif. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28mac80211: timeout tx agg sessions in way similar to rx agg sessionsNikolay Martynov1-1/+34
Currently tx aggregation is not being timed out even if timeout is specified when aggregation is opened. Tx tid stays active until delba arrives from recipient (i.e. recipient times out tid when it is inactive). The problem with this approach is that delba can get lost in the air and tx tid will stay perpetually opened on the originator while closed on recipient thus all data sent via this tid will be lost. This patch implements tx tid timeouting in way very similar to rx tid timeouting. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28mac80211: fix race between the AGG SM and the Tx data pathEmmanuel Grumbach1-0/+14
When a packet is supposed to sent be as an a-MPDU, mac80211 sets IEEE80211_TX_CTL_AMPDU to let the driver know. On the other hand, mac80211 configures the driver for aggregration with the ampdu_action callback. There is race between these two mechanisms since the following scenario can occur when the BA agreement is torn down: Tx softIRQ drv configuration ========== ================= check OPERATIONAL bit Set the TX_CTL_AMPDU bit in the packet clear OPERATIONAL bit stop Tx AGG Pass Tx packet to the driver. In that case the driver would get a packet with TX_CTL_AMPDU set although it has already been notified that the BA session has been torn down. To fix this, we need to synchronize all the Qdisc activity after we cleared the OPERATIONAL bit. After that step, all the following packets will be buffered until the driver reports it is ready to get new packets for this RA / TID. This buffering allows not to run into another race that would send packets with TX_CTL_AMPDU unset while the driver hasn't been requested to tear down the BA session yet. This race occurs in practice and iwlwifi complains with a WARN_ON when it happens. Cc: stable@kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28mac80211: fix race condition caused by late addBA responseNikolay Martynov1-1/+17
If addBA responses comes in just after addba_resp_timer has expired mac80211 will still accept it and try to open the aggregation session. This causes drivers to be confused and in some cases even crash. This patch fixes the race condition and makes sure that if addba_resp_timer has expired addBA response is not longer accepted and we do not try to open half-closed session. Cc: stable@vger.kernel.org Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> [some adjustments] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28mac80211: don't stop a single aggregation session twiceJohannes Berg1-2/+8
Nikolay noticed (by code review) that mac80211 can attempt to stop an aggregation session while it is already being stopped. So to fix it, check whether stop is already being done and bail out if so. Also move setting the STOPPING state into the lock so things are properly atomic. Cc: stable@vger.kernel.org Reported-by: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-22Merge branch 'master' of ↵John W. Linville1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux Conflicts: drivers/net/wireless/iwlegacy/iwl-debugfs.c drivers/net/wireless/iwlegacy/iwl-rx.c drivers/net/wireless/iwlegacy/iwl-scan.c drivers/net/wireless/iwlegacy/iwl-tx.c include/net/bluetooth/bluetooth.h
2011-11-09mac80211: allow frame aggregation for meshThomas Pedersen1-7/+3
Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Ashok Nagarajan <anagar6@uic.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-01net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modulesPaul Gortmaker1-0/+1
These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-30mac80211: optimise station flagsJohannes Berg1-1/+1
The flaglock in struct sta_info has long been something that I wanted to get rid of, this finally does the conversion to atomic bitops. The conversion itself is straight-forward in most places, a few things needed to change a bit since we can no longer use multiple bits at the same time. On x86-64, this is a fairly significant code size reduction: text data bss dec hex 427861 23648 1008 452517 6e7a5 before 425383 23648 976 450007 6ddd7 after Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14mac80211: make ieee80211_send_bar available for driversFelix Fietkau1-1/+3
To properly maintain the peer's block ack window, the driver needs to be able to control the new starting sequence number that is sent along with the BlockAckReq frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13mac80211: add flag to indicate HW only Tx-agg setup supportArik Nemtsov1-1/+2
When this flag is set, Tx A-MPDU sessions will not be started by mac80211. This flag is required for devices that support Tx A-MPDU setup in hardware. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13mac80211: Remove unnecessary OOM logging messagesJoe Perches1-27/+8
Removing unnecessary messages saves code and text. Site specific OOM messages are duplications of a generic MM out of memory message and aren't really useful, so just delete them. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22wireless: Introduce defines for BAR TID_INFO & MULTI_TID fieldsHelmut Schaa1-1/+1
While at it also fix the indention of the other IEEE80211_BAR_CTRL_ defines. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09mac80211: Stop TX BA session if buf_size is zeroHelmut Schaa1-11/+7
If we receive an ADDBA response with status code 0 and a buf_size of 0 we should stop the TX BA session as otherwise we'll end up queuing frames in ieee80211_tx_prep_agg forever instead of sending them out as non AMPDUs. This fixes a problem with AVM Fritz Stick N wireless devices where frames to this device are not transmitted anymore by mac80211. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds1-21/+38
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits) macvlan: fix panic if lowerdev in a bond tg3: Add braces around 5906 workaround. tg3: Fix NETIF_F_LOOPBACK error macvlan: remove one synchronize_rcu() call networking: NET_CLS_ROUTE4 depends on INET irda: Fix error propagation in ircomm_lmp_connect_response() irda: Kill set but unused variable 'bytes' in irlan_check_command_param() irda: Kill set but unused variable 'clen' in ircomm_connect_indication() rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport() be2net: Kill set but unused variable 'req' in lancer_fw_download() irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication() atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined. rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer(). rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler() rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection() rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window() pkt_sched: Kill set but unused variable 'protocol' in tc_classify() isdn: capi: Use pr_debug() instead of ifdefs. tg3: Update version to 3.119 tg3: Apply rx_discards fix to 5719/5720 ... Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c as per Davem.
2011-05-16mac80211: sparse RCU annotationsJohannes Berg1-15/+21
This adds sparse RCU annotations to most of mac80211, only the mesh code remains to be done. Due the the previous patches, the annotations are pretty simple. The only thing that this actually changes is removing the RCU usage of key->sta in debugfs since this pointer isn't actually an RCU-managed pointer (it only has a single assignment done before the key even goes live). As that is otherwise harmless, I decided to make it part of this patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16mac80211: fix TX a-MPDU lockingJohannes Berg1-6/+17
During my quest to make mac80211 not have any RCU warnings from sparse, I came across the a-MPDU code again and it wasn't quite clear why it isn't racy. So instead of assigning the tid_tx array with just the spinlock held in ieee80211_start_tx_ba_session use a separate temporary array protected only by the spinlock and protect all assignments to the "live" array by both the spinlock and the mutex so that other code is easily verified to be correct. Due to pointer assignment atomicity I don't think this is a real issue, but I'm not sure, especially on Alpha the current code might be problematic. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-08net,rcu: convert call_rcu(kfree_tid_tx) to kfree_rcu()Lai Jiangshan1-11/+3
The rcu callback kfree_tid_tx() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(kfree_tid_tx). Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Acked-by: "David S. Miller" <davem@davemloft.net>
2011-01-19mac80211: allow advertising correct maximum aggregate sizeJohannes Berg1-1/+2
Currently, mac80211 always advertises that it may send up to 64 subframes in an aggregate. This is fine, since it's the max, but might as well be set to zero instead since it doesn't have any information. However, drivers might have that information, so allow them to set a variable giving it, which will then be used. The default of zero will be fine since to the peer that means we don't know and it will just use its own limit for the buffer size. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19mac80211: track receiver's aggregation reorder buffer sizeJohannes Berg1-3/+17
The aggregation code currently doesn't implement the buffer size negotiation. It will always request a max buffer size (which is fine, if a little pointless, as the mac80211 code doesn't know and might just use 0 instead), but if the peer requests a smaller size it isn't possible to honour this request. In order to fix this, look at the buffer size in the addBA response frame, keep track of it and pass it to the driver in the ampdu_action callback when called with the IEEE80211_AMPDU_TX_OPERATIONAL action. That way the driver can limit the number of subframes in aggregates appropriately. Note that this doesn't fix any drivers apart from the addition of the new argument -- they all need to be updated separately to use this variable! Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16mac80211: Add timeout to BA session start APISujith Manoharan1-2/+5
Allow drivers or rate control algorithms to specify BlockAck session timeout when initiating an ADDBA transaction. This is useful in cases where maintaining persistent BA sessions does not incur any overhead. The current timeout value of 5000 TUs is retained for all non ath9k/ath9k_htc drivers. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07mac80211: avoid transmitting delBA to old APJohannes Berg1-5/+9
When roaming while we have active BA session, we can end up transmitting delBA frames to the old AP while we're already on the new AP's channel, which can cause warnings. Simply avoid sending those frames, but still tear down the internal session state, since they are not really necessary anyway as we will implicitly disassociate when sending the association to the new AP. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06mac80211: delete AddBA response timerJohannes Berg1-0/+2
We never delete the addBA response timer, which is typically fine, but if the station it belongs to is deleted very quickly after starting the BA session, before the peer had a chance to reply, the timer may fire after the station struct has been freed already. Therefore, we need to delete the timer in a suitable spot -- best when the session is being stopped (which will happen even then) in which case the delete will be a no-op most of the time. I've reproduced the scenario and tested the fix. This fixes the crash reported at http://mid.gmane.org/4CAB6F96.6090701@candelatech.com Cc: stable@kernel.org Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14mac80211: update aggregation documentationJohannes Berg1-16/+27
Even before the recent changes, the documentation for TX aggregation was somewhat out of date. Update it and also add documentation for the RX side. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14mac80211: change TX aggregation lockingJohannes Berg1-41/+53
To prepare for allowing drivers to sleep in ampdu_action, change the locking in the TX aggregation code to use the mutex the RX part already uses. The spinlock is still necessary around some code to avoid races with TX, but now we can also synchronize_net() to avoid getting an inconsistent sequence number. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14mac80211: defer TX agg session teardown to workJohannes Berg1-5/+5
Since we want the code to be able to sleep in the future, it must not be called from the timer directly. To achieve that, simply call the function drivers would call, and also use RCU in the timer to get the struct so we don't need to rely on the spinlock in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-18 04:28:43 +0300