summaryrefslogtreecommitdiff
path: root/net/ipv6
AgeCommit message (Collapse)AuthorFilesLines
2018-04-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller1-27/+28
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree, they are: 1) Fix SIP conntrack with phones sending session descriptions for different media types but same port numbers, from Florian Westphal. 2) Fix incorrect rtnl_lock mutex logic from IPVS sync thread, from Julian Anastasov. 3) Skip compat array allocation in ebtables if there is no entries, also from Florian. 4) Do not lose left/right bits when shifting marks from xt_connmark, from Jack Ma. 5) Silence false positive memleak in conntrack extensions, from Cong Wang. 6) Fix CONFIG_NF_REJECT_IPV6=m link problems, from Arnd Bergmann. 7) Cannot kfree rule that is already in list in nf_tables, switch order so this error handling is not required, from Florian Westphal. 8) Release set name in error path, from Florian. 9) include kmemleak.h in nf_conntrack_extend.c, from Stepheh Rothwell. 10) NAT chain and extensions depend on NF_TABLES. 11) Out of bound access when renaming chains, from Taehee Yoo. 12) Incorrect casting in xt_connmark leads to wrong bitshifting. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23net/ipv6: Fix missing rcu dereferences on fromDavid Ahern1-5/+10
kbuild test robot reported 2 uses of rt->from not properly accessed using rcu_dereference: 1. add rcu_dereference_protected to rt6_remove_exception_rt and make sure it is always called with rcu lock held. 2. change rt6_do_redirect to take a reference on 'from' when accessed the first time so it can be used the sceond time outside of the lock Fixes: a68886a69180 ("net/ipv6: Make from in rt6_info rcu protected") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23net/ipv6: add rcu locking to ip6_negative_adviceDavid Ahern1-0/+2
syzbot reported a suspicious rcu_dereference_check: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 lockdep_rcu_suspicious+0x14a/0x153 kernel/locking/lockdep.c:4592 rt6_check_expired+0x38b/0x3e0 net/ipv6/route.c:410 ip6_negative_advice+0x67/0xc0 net/ipv6/route.c:2204 dst_negative_advice include/net/sock.h:1786 [inline] sock_setsockopt+0x138f/0x1fe0 net/core/sock.c:1051 __sys_setsockopt+0x2df/0x390 net/socket.c:1899 SYSC_setsockopt net/socket.c:1914 [inline] SyS_setsockopt+0x34/0x50 net/socket.c:1911 Add rcu locking around call to rt6_check_expired in ip6_negative_advice. Fixes: a68886a69180 ("net/ipv6: Make from in rt6_info rcu protected") Reported-by: syzbot+2422c9e35796659d2273@syzkaller.appspotmail.com Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23ipv6: add RTA_TABLE and RTA_PREFSRC to rtm_ipv6_policyEric Dumazet1-0/+2
KMSAN reported use of uninit-value that I tracked to lack of proper size check on RTA_TABLE attribute. I also believe RTA_PREFSRC lacks a similar check. Fixes: 86872cb57925 ("[IPv6] route: FIB6 configuration using struct fib6_config") Fixes: c3968a857a6b ("ipv6: RTA_PREFSRC support for ipv6 route source address selection") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23net: fib_rules: add extack supportRoopa Prabhu2-3/+7
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23ipv6: sr: fix NULL pointer dereference in seg6_do_srh_encap()- v4 pktsAhmed Abdelsalam1-1/+1
In case of seg6 in encap mode, seg6_do_srh_encap() calls set_tun_src() in order to set the src addr of outer IPv6 header. The net_device is required for set_tun_src(). However calling ip6_dst_idev() on dst_entry in case of IPv4 traffic results on the following bug. Using just dst->dev should fix this BUG. [ 196.242461] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 196.242975] PGD 800000010f076067 P4D 800000010f076067 PUD 10f060067 PMD 0 [ 196.243329] Oops: 0000 [#1] SMP PTI [ 196.243468] Modules linked in: nfsd auth_rpcgss nfs_acl nfs lockd grace fscache sunrpc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd input_leds glue_helper led_class pcspkr serio_raw mac_hid video autofs4 hid_generic usbhid hid e1000 i2c_piix4 ahci pata_acpi libahci [ 196.244362] CPU: 2 PID: 1089 Comm: ping Not tainted 4.16.0+ #1 [ 196.244606] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 196.244968] RIP: 0010:seg6_do_srh_encap+0x1ac/0x300 [ 196.245236] RSP: 0018:ffffb2ce00b23a60 EFLAGS: 00010202 [ 196.245464] RAX: 0000000000000000 RBX: ffff8c7f53eea300 RCX: 0000000000000000 [ 196.245742] RDX: 0000f10000000000 RSI: ffff8c7f52085a6c RDI: ffff8c7f41166850 [ 196.246018] RBP: ffffb2ce00b23aa8 R08: 00000000000261e0 R09: ffff8c7f41166800 [ 196.246294] R10: ffffdce5040ac780 R11: ffff8c7f41166828 R12: ffff8c7f41166808 [ 196.246570] R13: ffff8c7f52085a44 R14: ffffffffb73211c0 R15: ffff8c7e69e44200 [ 196.246846] FS: 00007fc448789700(0000) GS:ffff8c7f59d00000(0000) knlGS:0000000000000000 [ 196.247286] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 196.247526] CR2: 0000000000000000 CR3: 000000010f05a000 CR4: 00000000000406e0 [ 196.247804] Call Trace: [ 196.247972] seg6_do_srh+0x15b/0x1c0 [ 196.248156] seg6_output+0x3c/0x220 [ 196.248341] ? prandom_u32+0x14/0x20 [ 196.248526] ? ip_idents_reserve+0x6c/0x80 [ 196.248723] ? __ip_select_ident+0x90/0x100 [ 196.248923] ? ip_append_data.part.50+0x6c/0xd0 [ 196.249133] lwtunnel_output+0x44/0x70 [ 196.249328] ip_send_skb+0x15/0x40 [ 196.249515] raw_sendmsg+0x8c3/0xac0 [ 196.249701] ? _copy_from_user+0x2e/0x60 [ 196.249897] ? rw_copy_check_uvector+0x53/0x110 [ 196.250106] ? _copy_from_user+0x2e/0x60 [ 196.250299] ? copy_msghdr_from_user+0xce/0x140 [ 196.250508] sock_sendmsg+0x36/0x40 [ 196.250690] ___sys_sendmsg+0x292/0x2a0 [ 196.250881] ? _cond_resched+0x15/0x30 [ 196.251074] ? copy_termios+0x1e/0x70 [ 196.251261] ? _copy_to_user+0x22/0x30 [ 196.251575] ? tty_mode_ioctl+0x1c3/0x4e0 [ 196.251782] ? _cond_resched+0x15/0x30 [ 196.251972] ? mutex_lock+0xe/0x30 [ 196.252152] ? vvar_fault+0xd2/0x110 [ 196.252337] ? __do_fault+0x1f/0xc0 [ 196.252521] ? __handle_mm_fault+0xc1f/0x12d0 [ 196.252727] ? __sys_sendmsg+0x63/0xa0 [ 196.252919] __sys_sendmsg+0x63/0xa0 [ 196.253107] do_syscall_64+0x72/0x200 [ 196.253305] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 196.253530] RIP: 0033:0x7fc4480b0690 [ 196.253715] RSP: 002b:00007ffde9f252f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 196.254053] RAX: ffffffffffffffda RBX: 0000000000000040 RCX: 00007fc4480b0690 [ 196.254331] RDX: 0000000000000000 RSI: 000000000060a360 RDI: 0000000000000003 [ 196.254608] RBP: 00007ffde9f253f0 R08: 00000000002d1e81 R09: 0000000000000002 [ 196.254884] R10: 00007ffde9f250c0 R11: 0000000000000246 R12: 0000000000b22070 [ 196.255205] R13: 20c49ba5e353f7cf R14: 431bde82d7b634db R15: 00007ffde9f278fe [ 196.255484] Code: a5 0f b6 45 c0 41 88 41 28 41 0f b6 41 2c 48 c1 e0 04 49 8b 54 01 38 49 8b 44 01 30 49 89 51 20 49 89 41 18 48 8b 83 b0 00 00 00 <48> 8b 30 49 8b 86 08 0b 00 00 48 8b 40 20 48 8b 50 08 48 0b 10 [ 196.256190] RIP: seg6_do_srh_encap+0x1ac/0x300 RSP: ffffb2ce00b23a60 [ 196.256445] CR2: 0000000000000000 [ 196.256676] ---[ end trace 71af7d093603885c ]--- Fixes: 8936ef7604c11 ("ipv6: sr: fix NULL pointer dereference when setting encap source address") Signed-off-by: Ahmed Abdelsalam <amsalam20@gmail.com> Acked-by: David Lebrun <dlebrun@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-21net/ipv6: Remove unncessary check on f6i in fib6_checkDavid Ahern1-2/+1
Dan reported an imbalance in fib6_check on use of f6i and checking whether it is null. Since fib6_check is only called if f6i is non-null, remove the unnecessary check. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-21net/ipv6: Make from in rt6_info rcu protectedDavid Ahern3-31/+82
When a dst entry is created from a fib entry, the 'from' in rt6_info is set to the fib entry. The 'from' reference is used most notably for cookie checking - making sure stale dst entries are updated if the fib entry is changed. When a fib entry is deleted, the pcpu routes on it are walked releasing the fib6_info reference. This is needed for the fib6_info cleanup to happen and to make sure all device references are released in a timely manner. There is a race window when a FIB entry is deleted and the 'from' on the pcpu route is dropped and the pcpu route hits a cookie check. Handle this race using rcu on from. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-21net/ipv6: Move release of fib6_info from pcpu routes to helperDavid Ahern1-18/+23
Code move only; no functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-21net/ipv6: Move rcu locking to callers of fib6_get_cookie_safeDavid Ahern1-3/+10
A later patch protects 'from' in rt6_info and this simplifies the locking needed by it. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-21net/ipv6: Move rcu_read_lock to callers of ip6_rt_cache_allocDavid Ahern1-7/+6
A later patch protects 'from' in rt6_info and this simplifies the locking needed by it. With the move, the fib6_info_hold for the uncached_rt is no longer needed since the rcu_lock is still held. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-21net/ipv6: Rename rt6_get_cookie_safeDavid Ahern1-2/+2
rt6_get_cookie_safe takes a fib6_info and checks the sernum of the node. Update the name to reflect its purpose. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-21net/ipv6: Clean up rt expires helpersDavid Ahern1-0/+9
rt6_clean_expires and rt6_set_expires are no longer used. Removed them. rt6_update_expires has 1 caller in route.c, so move it from the header. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-21netfilter: nf_flow_table: cache mtu in struct flow_offload_tupleFelix Fietkau1-14/+3
Reduces the number of cache lines touched in the offload forwarding path. This is safe because PMTU limits are bypassed for the forwarding path (see commit f87c10a8aa1e for more details). Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-04-21ipv6: make ip6_dst_mtu_forward inlineFelix Fietkau1-22/+0
Just like ip_dst_mtu_maybe_forward(), to avoid a dependency with ipv6.ko. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-04-20net/ipv6: Fix ip6_convert_metrics() bugEric Dumazet1-11/+9
If ip6_convert_metrics() fails to allocate memory, it should not overwrite rt->fib6_metrics or we risk a crash later as syzbot found. BUG: KASAN: null-ptr-deref in atomic_read include/asm-generic/atomic-instrumented.h:21 [inline] BUG: KASAN: null-ptr-deref in refcount_sub_and_test+0x92/0x330 lib/refcount.c:179 Read of size 4 at addr 0000000000000044 by task syzkaller832429/4487 CPU: 1 PID: 4487 Comm: syzkaller832429 Not tainted 4.16.0+ #6 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 kasan_report_error mm/kasan/report.c:352 [inline] kasan_report.cold.7+0x6d/0x2fe mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 kasan_check_read+0x11/0x20 mm/kasan/kasan.c:272 atomic_read include/asm-generic/atomic-instrumented.h:21 [inline] refcount_sub_and_test+0x92/0x330 lib/refcount.c:179 refcount_dec_and_test+0x1a/0x20 lib/refcount.c:212 fib6_info_destroy+0x2d0/0x3c0 net/ipv6/ip6_fib.c:206 fib6_info_release include/net/ip6_fib.h:304 [inline] ip6_route_info_create+0x677/0x3240 net/ipv6/route.c:3020 ip6_route_add+0x23/0xb0 net/ipv6/route.c:3030 inet6_rtm_newroute+0x142/0x160 net/ipv6/route.c:4406 rtnetlink_rcv_msg+0x466/0xc10 net/core/rtnetlink.c:4648 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2448 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4666 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x58b/0x740 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x9f0/0xfa0 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:639 ___sys_sendmsg+0x805/0x940 net/socket.c:2117 __sys_sendmsg+0x115/0x270 net/socket.c:2155 SYSC_sendmsg net/socket.c:2164 [inline] SyS_sendmsg+0x29/0x30 net/socket.c:2162 do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: d4ead6b34b67 ("net/ipv6: move metrics from dst to rt6_info") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Ahern <dsa@cumulusnetworks.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net/ipv6: Fix gfp_flags arg to addrconf_prefix_routeDavid Ahern1-2/+2
Eric noticed that __ipv6_ifa_notify is called under rcu_read_lock, so the gfp argument to addrconf_prefix_route can not be GFP_KERNEL. While scrubbing other calls I noticed addrconf_addr_gen has one place with GFP_ATOMIC that can be GFP_KERNEL. Fixes: acb54e3cba404 ("net/ipv6: Add gfp_flags to route add functions") Reported-by: syzbot+2add39b05179b31f912f@syzkaller.appspotmail.com Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net/ipv6: Remove fib6_idevDavid Ahern2-21/+47
fib6_idev can be obtained from __in6_dev_get on the nexthop device rather than caching it in the fib6_info. Remove it. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net/ipv6: Remove unnecessary checks on fib6_idevDavid Ahern1-22/+2
Prior to 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address") host routes and anycast routes were installed with the device set to loopback (or VRF device once that feature was added). In the older code dst.dev was set to loopback (needed for packet tx) and rt6i_idev was used to denote the actual interface. Commit 4832c30d5458 changed the code to have dst.dev pointing to the real device with the switch to lo or vrf device done on dst clones. As a consequence of this change a couple of device checks during route lookups are no longer needed. Remove them. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net/ipv6: Remove aca_idevDavid Ahern2-5/+2
aca_idev has only 1 user - inet6_fill_ifacaddr - and it only wants the device index which can be extracted from the fib6_info nexthop. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net/ipv6: Rename addrconf_dst_allocDavid Ahern3-43/+43
addrconf_dst_alloc now returns a fib6_info. Update the name and its users to reflect the change. Rename only; no functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net/ipv6: Rename fib6_info struct elementsDavid Ahern5-238/+238
Change the prefix for fib6_info struct elements from rt6i_ to fib6_. rt6i_pcpu and rt6i_exception_bucket are left as is given that they point to rt6_info entries. Rename only; not functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19netfilter: nf_tables: NAT chain and extensions require NF_TABLESPablo Neira Ayuso1-27/+28
Move these options inside the scope of the 'if' NF_TABLES and NF_TABLES_IPV6 dependencies. This patch fixes: net/ipv6/netfilter/nft_chain_nat_ipv6.o: In function `nft_nat_do_chain': >> net/ipv6/netfilter/nft_chain_nat_ipv6.c:37: undefined reference to `nft_do_chain' net/ipv6/netfilter/nft_chain_nat_ipv6.o: In function `nft_chain_nat_ipv6_exit': >> net/ipv6/netfilter/nft_chain_nat_ipv6.c:94: undefined reference to `nft_unregister_chain_type' net/ipv6/netfilter/nft_chain_nat_ipv6.o: In function `nft_chain_nat_ipv6_init': >> net/ipv6/netfilter/nft_chain_nat_ipv6.c:87: undefined reference to `nft_register_chain_type' that happens with: CONFIG_NF_TABLES=m CONFIG_NFT_CHAIN_NAT_IPV6=y Fixes: 02c7b25e5f54 ("netfilter: nf_tables: build-in filter chain type") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-04-19ipv6: frags: fix a lockdep false positiveEric Dumazet1-11/+12
lockdep does not know that the locks used by IPv4 defrag and IPv6 reassembly units are of different classes. It complains because of following chains : 1) sch_direct_xmit() (lock txq->_xmit_lock) dev_hard_start_xmit() xmit_one() dev_queue_xmit_nit() packet_rcv_fanout() ip_check_defrag() ip_defrag() spin_lock() (lock frag queue spinlock) 2) ip6_input_finish() ipv6_frag_rcv() (lock frag queue spinlock) ip6_frag_queue() icmpv6_param_prob() (lock txq->_xmit_lock at some point) We could add lockdep annotations, but we also can make sure IPv6 calls icmpv6_param_prob() only after the release of the frag queue spinlock, since this naturally makes frag queue spinlock a leaf in lock hierarchy. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Remove unused code and variables for rt6_infoDavid Ahern3-49/+2
Drop unneeded elements from rt6_info struct and rearrange layout to something more relevant for the data path. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Flip FIB entries to fib6_infoDavid Ahern5-200/+201
Convert all code paths referencing a FIB entry from rt6_info to fib6_info. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: separate handling of FIB entries from dst based routesDavid Ahern6-147/+113
Last step before flipping the data type for FIB entries: - use fib6_info_alloc to create FIB entries in ip6_route_info_create and addrconf_dst_alloc - use fib6_info_release in place of dst_release, ip6_rt_put and rt6_release - remove the dst_hold before calling __ip6_ins_rt or ip6_del_rt - when purging routes, drop per-cpu routes - replace inc and dec of rt6i_ref with fib6_info_hold and fib6_info_release - use rt->from since it points to the FIB entry - drop references to exception bucket, fib6_metrics and per-cpu from dst entries (those are relevant for fib entries only) Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: introduce fib6_info struct and helpersDavid Ahern1-0/+60
Add fib6_info struct and alloc, destroy, hold and release helpers. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Cleanup exception and cache route handlingDavid Ahern2-77/+81
IPv6 FIB will only contain FIB entries with exception routes added to the FIB entry. Once this transformation is complete, FIB lookups will return a fib6_info with the lookup functions still returning a dst based rt6_info. The current code uses rt6_info for both paths and overloads the rt6_info variable usually called 'rt'. This patch introduces a new 'f6i' variable name for the result of the FIB lookup and keeps 'rt' as the dst based return variable. 'f6i' becomes a fib6_info in a later patch which is why it is introduced as f6i now; avoids the additional churn in the later patch. In addition, remove RTF_CACHE and dst checks from fib6 add and delete since they can not happen now and will never happen after the data type flip. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Add gfp_flags to route add functionsDavid Ahern3-25/+34
Most FIB entries can be added using memory allocated with GFP_KERNEL. Add gfp_flags to ip6_route_add and addrconf_dst_alloc. Code paths that can be reached from the packet path (e.g., ndisc and autoconfig) or atomic notifiers use GFP_ATOMIC; paths from user context (adding addresses and routes) use GFP_KERNEL. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Create a neigh_lookup for FIB entriesDavid Ahern2-15/+26
The router discovery code has a FIB entry and wants to validate the gateway has a neighbor entry. Refactor the existing dst_neigh_lookup for IPv6 and create a new function that takes the gateway and device and returns a neighbor entry. Use the new function in ndisc_router_discovery to validate the gateway. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Move dst flags to booleans in fib entriesDavid Ahern2-7/+26
Continuing to wean FIB paths off of dst_entry, use a bool to hold requests for certain dst settings. Add a helper to convert the flags to DST flags when a FIB entry is converted to a dst_entry. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Add rt6_info create function for ip6_pol_route_lookupDavid Ahern1-4/+25
ip6_pol_route_lookup is the lookup function for ip6_route_lookup and rt6_lookup. At the moment it returns either a reference to a FIB entry or a cached exception. To move FIB entries to a separate struct, this lookup function needs to convert FIB entries to an rt6_info that is returned to the caller. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Add fib6_null_entryDavid Ahern2-32/+56
ip6_null_entry will stay a dst based return for lookups that fail to match an entry. Add a new fib6_null_entry which constitutes the root node and leafs for fibs. Replace existing references to ip6_null_entry with the new fib6_null_entry when dealing with FIBs. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: move expires into rt6_infoDavid Ahern4-17/+19
Add expires to rt6_info for FIB entries, and add fib6 helpers to manage it. Data path use of dst.expires remains. The transition is fairly straightforward: when working with fib entries, rt->dst.expires is just rt->expires, rt6_clean_expires is replaced with fib6_clean_expires, rt6_set_expires becomes fib6_set_expires, and rt6_check_expired becomes fib6_check_expired, where the fib6 versions are added by this patch. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: move metrics from dst to rt6_infoDavid Ahern3-210/+123
Similar to IPv4, add fib metrics to the fib struct, which at the moment is rt6_info. Will be moved to fib6_info in a later patch. Copy metrics into dst by reference using refcount. To make the transition: - add dst_metrics to rt6_info. Default to dst_default_metrics if no metrics are passed during route add. No need for a separate pmtu entry; it can reference the MTU slot in fib6_metrics - ip6_convert_metrics allocates memory in the FIB entry and uses ip_metrics_convert to copy from netlink attribute to metrics entry - the convert metrics call is done in ip6_route_info_create simplifying the route add path + fib6_commit_metrics and fib6_copy_metrics and the temporary mx6_config are no longer needed - add fib6_metric_set helper to change the value of a metric in the fib entry since dst_metric_set can no longer be used - cow_metrics for IPv6 can drop to dst_cow_metrics_generic - rt6_dst_from_metrics_check is no longer needed - rt6_fill_node needs the FIB entry and dst as separate arguments to keep compatibility with existing output. Current dst address is renamed to dest. (to be consistent with IPv4 rt6_fill_node really should be split into 2 functions similar to fib_dump_info and rt_fill_info) - rt6_fill_node no longer needs the temporary metrics variable Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Defer initialization of dst to data pathDavid Ahern1-41/+74
Defer setting dst input, output and error until fib entry is copied. The reject path from ip6_route_info_create is moved to a new function ip6_rt_init_dst_reject with a helper doing the conversion from fib6_type to dst error. The remainder of the new ip6_rt_init_dst is an amalgamtion of dst code from addrconf_dst_alloc and the non-reject path of ip6_route_info_create. The dst output function is always ip6_output and the input function is either ip6_input (local routes), ip6_mc_input (multicast routes) or ip6_forward (anything else). A couple of places using dst.error are updated to look at rt6i_flags. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Move nexthop data to fib6_nhDavid Ahern3-76/+94
Introduce fib6_nh structure and move nexthop related data from rt6_info and rt6_info.dst to fib6_nh. References to dev, gateway or lwtstate from a FIB lookup perspective are converted to use fib6_nh; datapath references to dst version are left as is. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Save route type in rt6_infoDavid Ahern2-26/+22
The RTN_ type for IPv6 FIB entries is currently embedded in rt6i_flags and dst.error. Since dst is going to be removed, it can no longer be relied on for FIB dumps so save the route type as fib6_type. fc_type is set in current users based on the algorithm in rt6_fill_node: - rt6i_flags contains RTF_LOCAL: fc_type = RTN_LOCAL - rt6i_flags contains RTF_ANYCAST: fc_type = RTN_ANYCAST - else fc_type = RTN_UNICAST Similarly, fib6_type is set in the rt6_info templates based on the RTF_REJECT section of rt6_fill_node converting dst.error to RTN type. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Move support functions up in route.cDavid Ahern1-60/+59
Code move only. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Pass net namespace to route functionsDavid Ahern4-50/+59
Pass network namespace reference into route add, delete and get functions. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Pass net to fib6_update_sernumDavid Ahern2-7/+6
Pass net namespace to fib6_update_sernum. It can not be marked const as fib6_new_sernum will change ipv6.fib6_sernum. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17ipv6: send netlink notifications for manually configured addressesLorenzo Bianconi1-8/+5
Send a netlink notification when userspace adds a manually configured address if DAD is enabled and optimistic flag isn't set. Moreover send RTM_DELADDR notifications for tentative addresses. Some userspace applications (e.g. NetworkManager) are interested in addr netlink events albeit the address is still in tentative state, however events are not sent if DAD process is not completed. If the address is added and immediately removed userspace listeners are not notified. This behaviour can be easily reproduced by using veth interfaces: $ ip -b - <<EOF > link add dev vm1 type veth peer name vm2 > link set dev vm1 up > link set dev vm2 up > addr add 2001:db8:a:b:1:2:3:4/64 dev vm1 > addr del 2001:db8:a:b:1:2:3:4/64 dev vm1 EOF This patch reverts the behaviour introduced by the commit f784ad3d79e5 ("ipv6: do not send RTM_DELADDR for tentative addresses") Suggested-by: Thomas Haller <thaller@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17ipv6: Count interface receive statistics on the ingress netdevStephen Suryaputra5-50/+34
The statistics such as InHdrErrors should be counted on the ingress netdev rather than on the dev from the dst, which is the egress. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17net/ipv6: Make __inet6_bind staticDavid Ahern1-27/+26
BPF core gets access to __inet6_bind via ipv6_bpf_stub_impl, so it is not invoked directly outside of af_inet6.c. Make it static and move inet6_bind after to avoid forward declaration. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17tcp: implement mmap() for zero copy receiveEric Dumazet1-1/+1
Some networks can make sure TCP payload can exactly fit 4KB pages, with well chosen MSS/MTU and architectures. Implement mmap() system call so that applications can avoid copying data without complex splice() games. Note that a successful mmap( X bytes) on TCP socket is consuming bytes, as if recvmsg() has been done. (tp->copied += X) Only PROT_READ mappings are accepted, as skb page frags are fundamentally shared and read only. If tcp_mmap() finds data that is not a full page, or a patch of urgent data, -EINVAL is returned, no bytes are consumed. Application must fallback to recvmsg() to read the problematic sequence. mmap() wont block, regardless of socket being in blocking or non-blocking mode. If not enough bytes are in receive queue, mmap() would return -EAGAIN, or -EIO if socket is in a state where no other bytes can be added into receive queue. An application might use SO_RCVLOWAT, poll() and/or ioctl( FIONREAD) to efficiently use mmap() On the sender side, MSG_EOR might help to clearly separate unaligned headers and 4K-aligned chunks if necessary. Tested: mlx4 (cx-3) 40Gbit NIC, with tcp_mmap program provided in following patch. MTU set to 4168 (4096 TCP payload, 40 bytes IPv6 header, 32 bytes TCP header) Without mmap() (tcp_mmap -s) received 32768 MB (0 % mmap'ed) in 8.13342 s, 33.7961 Gbit, cpu usage user:0.034 sys:3.778, 116.333 usec per MB, 63062 c-switches received 32768 MB (0 % mmap'ed) in 8.14501 s, 33.748 Gbit, cpu usage user:0.029 sys:3.997, 122.864 usec per MB, 61903 c-switches received 32768 MB (0 % mmap'ed) in 8.11723 s, 33.8635 Gbit, cpu usage user:0.048 sys:3.964, 122.437 usec per MB, 62983 c-switches received 32768 MB (0 % mmap'ed) in 8.39189 s, 32.7552 Gbit, cpu usage user:0.038 sys:4.181, 128.754 usec per MB, 55834 c-switches With mmap() on receiver (tcp_mmap -s -z) received 32768 MB (100 % mmap'ed) in 8.03083 s, 34.2278 Gbit, cpu usage user:0.024 sys:1.466, 45.4712 usec per MB, 65479 c-switches received 32768 MB (100 % mmap'ed) in 7.98805 s, 34.4111 Gbit, cpu usage user:0.026 sys:1.401, 43.5486 usec per MB, 65447 c-switches received 32768 MB (100 % mmap'ed) in 7.98377 s, 34.4296 Gbit, cpu usage user:0.028 sys:1.452, 45.166 usec per MB, 65496 c-switches received 32768 MB (99.9969 % mmap'ed) in 8.01838 s, 34.281 Gbit, cpu usage user:0.02 sys:1.446, 44.7388 usec per MB, 65505 c-switches Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17tcp: fix SO_RCVLOWAT and RCVBUF autotuningEric Dumazet1-0/+1
Applications might use SO_RCVLOWAT on TCP socket hoping to receive one [E]POLLIN event only when a given amount of bytes are ready in socket receive queue. Problem is that receive autotuning is not aware of this constraint, meaning sk_rcvbuf might be too small to allow all bytes to be stored. Add a new (struct proto_ops)->set_rcvlowat method so that a protocol can override the default setsockopt(SO_RCVLOWAT) behavior. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17ipv6: remove unnecessary check in addrconf_prefix_rcv_add_addr()Lorenzo Bianconi1-2/+1
Remove unnecessary check on update_lft variable in addrconf_prefix_rcv_add_addr routine since it is always set to 0. Moreover remove update_lft re-initialization to 0 Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16xfrm: Fix warning in xfrm6_tunnel_net_exit.Steffen Klassert1-0/+3
We need to make sure that all states are really deleted before we check that the state lists are empty. Otherwise we trigger a warning. Fixes: baeb0dbbb5659 ("xfrm6_tunnel: exit_net cleanup check added") Reported-and-tested-by:syzbot+777bf170a89e7b326405@syzkaller.appspotmail.com Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-04-06net/ipv6: Increment OUTxxx counters after netfilter hookJeff Barnhill1-2/+5
At the end of ip6_forward(), IPSTATS_MIB_OUTFORWDATAGRAMS and IPSTATS_MIB_OUTOCTETS are incremented immediately before the NF_HOOK call for NFPROTO_IPV6 / NF_INET_FORWARD. As a result, these counters get incremented regardless of whether or not the netfilter hook allows the packet to continue being processed. This change increments the counters in ip6_forward_finish() so that it will not happen if the netfilter hook chooses to terminate the packet, which is similar to how IPv4 works. Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 12:28:16 +0300