summaryrefslogtreecommitdiff
path: root/net/ipv6/ip6_output.c
AgeCommit message (Collapse)AuthorFilesLines
2018-07-23ip: hash fragments consistentlyPaolo Abeni1-0/+2
The skb hash for locally generated ip[v6] fragments belonging to the same datagram can vary in several circumstances: * for connected UDP[v6] sockets, the first fragment get its hash via set_owner_w()/skb_set_hash_from_sk() * for unconnected IPv6 UDPv6 sockets, the first fragment can get its hash via ip6_make_flowlabel()/skb_get_hash_flowi6(), if auto_flowlabel is enabled For the following frags the hash is usually computed via skb_get_hash(). The above can cause OoO for unconnected IPv6 UDPv6 socket: in that scenario the egress tx queue can be selected on a per packet basis via the skb hash. It may also fool flow-oriented schedulers to place fragments belonging to the same datagram in different flows. Fix the issue by copying the skb hash from the head frag into the others at fragmentation time. Before this commit: perf probe -a "dev_queue_xmit skb skb->hash skb->l4_hash:b1@0/8 skb->sw_hash:b1@1/8" netperf -H $IPV4 -t UDP_STREAM -l 5 -- -m 2000 -n & perf record -e probe:dev_queue_xmit -e probe:skb_set_owner_w -a sleep 0.1 perf script probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=3713014309 l4_hash=1 sw_hash=0 probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=0 l4_hash=0 sw_hash=0 After this commit: probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=2171763177 l4_hash=1 sw_hash=0 probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=2171763177 l4_hash=1 sw_hash=0 Fixes: b73c3d0e4f0e ("net: Save TX flow hash in sock and set in skbuf on xmit") Fixes: 67800f9b1f4e ("ipv6: Call skb_get_hash_flowi6 to get skb->hash in ip6_make_flowlabel") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-20ip: limit use of gso_size to udpWillem de Bruijn1-1/+2
The ipcm(6)_cookie field gso_size is set only in the udp path. The ip layer copies this to cork only if sk_type is SOCK_DGRAM. This check proved too permissive. Ping and l2tp sockets have the same type. Limit to sockets of type SOCK_DGRAM and protocol IPPROTO_UDP to exclude ping sockets. v1 -> v2 - remove irrelevant whitespace changes Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT") Reported-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04vrf: check the original netdevice for generating redirectStephen Suryaputra1-1/+2
Use the right device to determine if redirect should be sent especially when using vrf. Same as well as when sending the redirect. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
S390 bpf_jit.S is removed in net-next and had changes in 'net', since that code isn't used any more take the removal. TLS data structures split the TX and RX components in 'net-next', put the new struct members from the bug fix in 'net' into the RX part. The 'net-next' tree had some reworking of how the ERSPAN code works in the GRE tunneling code, overlapping with a one-line headroom calculation fix in 'net'. Overlapping changes in __sock_map_ctx_update_elem(), keep the bits that read the prog members via READ_ONCE() into local variables before using them. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: test tailroom before appending to linear skbWillem de Bruijn1-1/+2
Device features may change during transmission. In particular with corking, a device may toggle scatter-gather in between allocating and writing to an skb. Do not unconditionally assume that !NETIF_F_SG at write time implies that the same held at alloc time and thus the skb has sufficient tailroom. This issue predates git history. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller1-22/+0
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree, more relevant updates in this batch are: 1) Add Maglev support to IPVS. Moreover, store lastest server weight in IPVS since this is needed by maglev, patches from from Inju Song. 2) Preparation works to add iptables flowtable support, patches from Felix Fietkau. 3) Hand over flows back to conntrack slow path in case of TCP RST/FIN packet is seen via new teardown state, also from Felix. 4) Add support for extended netlink error reporting for nf_tables. 5) Support for larger timeouts that 23 days in nf_tables, patch from Florian Westphal. 6) Always set an upper limit to dynamic sets, also from Florian. 7) Allow number generator to make map lookups, from Laura Garcia. 8) Use hash_32() instead of opencode hashing in IPVS, from Vicent Bernat. 9) Extend ip6tables SRH match to support previous, next and last SID, from Ahmed Abdelsalam. 10) Move Passive OS fingerprint nf_osf.c, from Fernando Fernandez. 11) Expose nf_conntrack_max through ctnetlink, from Florent Fourcot. 12) Several housekeeping patches for xt_NFLOG, x_tables and ebtables, from Taehee Yoo. 13) Unify meta bridge with core nft_meta, then make nft_meta built-in. Make rt and exthdr built-in too, again from Florian. 14) Missing initialization of tbl->entries in IPVS, from Cong Wang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-26udp: paged allocation with gsoWillem de Bruijn1-5/+14
When sending large datagrams that are later segmented, store data in page frags to avoid copying from linear in skb_segment. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-26udp: generate gso with UDP_SEGMENTWillem de Bruijn1-2/+4
Support generic segmentation offload for udp datagrams. Callers can concatenate and send at once the payload of multiple datagrams with the same destination. To set segment size, the caller sets socket option UDP_SEGMENT to the length of each discrete payload. This value must be smaller than or equal to the relevant MTU. A follow-up patch adds cmsg UDP_SEGMENT to specify segment size on a per send call basis. Total byte length may then exceed MTU. If not an exact multiple of segment size, the last segment will be shorter. The implementation adds a gso_size field to the udp socket, ip(v6) cmsg cookie and inet_cork structure to be able to set the value at setsockopt or cmsg time and to work with both lockless and corked paths. Initial benchmark numbers show UDP GSO about as expensive as TCP GSO. tcp tso 3197 MB/s 54232 msg/s 54232 calls/s 6,457,754,262 cycles tcp gso 1765 MB/s 29939 msg/s 29939 calls/s 11,203,021,806 cycles tcp without tso/gso * 739 MB/s 12548 msg/s 12548 calls/s 11,205,483,630 cycles udp 876 MB/s 14873 msg/s 624666 calls/s 11,205,777,429 cycles udp gso 2139 MB/s 36282 msg/s 36282 calls/s 11,204,374,561 cycles [*] after reverting commit 0a6b2a1dc2a2 ("tcp: switch to GSO being always on") Measured total system cycles ('-a') for one core while pinning both the network receive path and benchmark process to that core: perf stat -a -C 12 -e cycles \ ./udpgso_bench_tx -C 12 -4 -D "$DST" -l 4 Note the reduction in calls/s with GSO. Bytes per syscall drops increases from 1470 to 61818. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-26udp: expose inet cork to udpWillem de Bruijn1-10/+10
UDP segmentation offload needs access to inet_cork in the udp layer. Pass the struct to ip(6)_make_skb instead of allocating it on the stack in that function itself. This patch is a noop otherwise. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-21net/ipv6: Make from in rt6_info rcu protectedDavid Ahern1-2/+7
When a dst entry is created from a fib entry, the 'from' in rt6_info is set to the fib entry. The 'from' reference is used most notably for cookie checking - making sure stale dst entries are updated if the fib entry is changed. When a fib entry is deleted, the pcpu routes on it are walked releasing the fib6_info reference. This is needed for the fib6_info cleanup to happen and to make sure all device references are released in a timely manner. There is a race window when a FIB entry is deleted and the 'from' on the pcpu route is dropped and the pcpu route hits a cookie check. Handle this race using rcu on from. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-21ipv6: make ip6_dst_mtu_forward inlineFelix Fietkau1-22/+0
Just like ip_dst_mtu_maybe_forward(), to avoid a dependency with ipv6.ko. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-04-18net/ipv6: separate handling of FIB entries from dst based routesDavid Ahern1-1/+2
Last step before flipping the data type for FIB entries: - use fib6_info_alloc to create FIB entries in ip6_route_info_create and addrconf_dst_alloc - use fib6_info_release in place of dst_release, ip6_rt_put and rt6_release - remove the dst_hold before calling __ip6_ins_rt or ip6_del_rt - when purging routes, drop per-cpu routes - replace inc and dec of rt6i_ref with fib6_info_hold and fib6_info_release - use rt->from since it points to the FIB entry - drop references to exception bucket, fib6_metrics and per-cpu from dst entries (those are relevant for fib entries only) Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17ipv6: Count interface receive statistics on the ingress netdevStephen Suryaputra1-11/+7
The statistics such as InHdrErrors should be counted on the ingress netdev rather than on the dev from the dst, which is the egress. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-06net/ipv6: Increment OUTxxx counters after netfilter hookJeff Barnhill1-2/+5
At the end of ip6_forward(), IPSTATS_MIB_OUTFORWDATAGRAMS and IPSTATS_MIB_OUTOCTETS are incremented immediately before the NF_HOOK call for NFPROTO_IPV6 / NF_INET_FORWARD. As a result, these counters get incremented regardless of whether or not the netfilter hook allows the packet to continue being processed. This change increments the counters in ip6_forward_finish() so that it will not happen if the netfilter hook chooses to terminate the packet, which is similar to how IPv4 works. Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04net: avoid unneeded atomic operation in ip*_append_data()Paolo Abeni1-1/+2
After commit 694aba690de0 ("ipv4: factorize sk_wmem_alloc updates done by __ip_append_data()") and commit 1f4c6eb24029 ("ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()"), when transmitting sub MTU datagram, an addtional, unneeded atomic operation is performed in ip*_append_data() to update wmem_alloc: in the above condition the delta is 0. The above cause small but measurable performance regression in UDP xmit tput test with packet size below MTU. This change avoids such overhead updating wmem_alloc only if wmem_alloc_delta is non zero. The error path is left intentionally unmodified: it's a slow path and simplicity is preferred to performances. Fixes: 694aba690de0 ("ipv4: factorize sk_wmem_alloc updates done by __ip_append_data()") Fixes: 1f4c6eb24029 ("ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04ipv6: allow to cache dst for a connected sk in ip6_sk_dst_lookup_flow()Alexey Kodanev1-3/+12
Add 'connected' parameter to ip6_sk_dst_lookup_flow() and update the cache only if ip6_sk_dst_check() returns NULL and a socket is connected. The function is used as before, the new behavior for UDP sockets in udpv6_sendmsg() will be enabled in the next patch. Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+9
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c, we had some overlapping changes: 1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE --> MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE 2) In 'net-next' params->log_rq_size is renamed to be params->log_rq_mtu_frames. 3) In 'net-next' params->hard_mtu is added. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()Eric Dumazet1-5/+12
While testing my inet defrag changes, I found that the senders could spend ~20% of cpu cycles in skb_set_owner_w() updating sk->sk_wmem_alloc for every fragment they cook, competing with TX completion of prior skbs possibly happening on another cpus. The solution to this problem is to use alloc_skb() instead of sock_wmalloc() and manually perform a single sk_wmem_alloc change. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26ipv6: the entire IPv6 header chain must fit the first fragmentPaolo Abeni1-4/+9
While building ipv6 datagram we currently allow arbitrary large extheaders, even beyond pmtu size. The syzbot has found a way to exploit the above to trigger the following splat: kernel BUG at ./include/linux/skbuff.h:2073! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 4230 Comm: syzkaller672661 Not tainted 4.16.0-rc2+ #326 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__skb_pull include/linux/skbuff.h:2073 [inline] RIP: 0010:__ip6_make_skb+0x1ac8/0x2190 net/ipv6/ip6_output.c:1636 RSP: 0018:ffff8801bc18f0f0 EFLAGS: 00010293 RAX: ffff8801b17400c0 RBX: 0000000000000738 RCX: ffffffff84f01828 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8801b415ac18 RBP: ffff8801bc18f360 R08: ffff8801b4576844 R09: 0000000000000000 R10: ffff8801bc18f380 R11: ffffed00367aee4e R12: 00000000000000d6 R13: ffff8801b415a740 R14: dffffc0000000000 R15: ffff8801b45767c0 FS: 0000000001535880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002000b000 CR3: 00000001b4123001 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip6_finish_skb include/net/ipv6.h:969 [inline] udp_v6_push_pending_frames+0x269/0x3b0 net/ipv6/udp.c:1073 udpv6_sendmsg+0x2a96/0x3400 net/ipv6/udp.c:1343 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:764 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg+0xca/0x110 net/socket.c:640 ___sys_sendmsg+0x320/0x8b0 net/socket.c:2046 __sys_sendmmsg+0x1ee/0x620 net/socket.c:2136 SYSC_sendmmsg net/socket.c:2167 [inline] SyS_sendmmsg+0x35/0x60 net/socket.c:2162 do_syscall_64+0x280/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x4404c9 RSP: 002b:00007ffdce35f948 EFLAGS: 00000217 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004404c9 RDX: 0000000000000003 RSI: 0000000020001f00 RDI: 0000000000000003 RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 0000000020000080 R11: 0000000000000217 R12: 0000000000401df0 R13: 0000000000401e80 R14: 0000000000000000 R15: 0000000000000000 Code: ff e8 1d 5e b9 fc e9 15 e9 ff ff e8 13 5e b9 fc e9 44 e8 ff ff e8 29 5e b9 fc e9 c0 e6 ff ff e8 3f f3 80 fc 0f 0b e8 38 f3 80 fc <0f> 0b 49 8d 87 80 00 00 00 4d 8d 87 84 00 00 00 48 89 85 20 fe RIP: __skb_pull include/linux/skbuff.h:2073 [inline] RSP: ffff8801bc18f0f0 RIP: __ip6_make_skb+0x1ac8/0x2190 net/ipv6/ip6_output.c:1636 RSP: ffff8801bc18f0f0 As stated by RFC 7112 section 5: When a host fragments an IPv6 datagram, it MUST include the entire IPv6 Header Chain in the First Fragment. So this patch addresses the issue dropping datagrams with excessive extheader length. It also updates the error path to report to the calling socket nonnegative pmtu values. The issue apparently predates git history. v1 -> v2: cleanup error path, as per Eric's suggestion Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+91e6f9932ff122fa4410@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
All of the conflicts were cases of overlapping changes. In net/core/devlink.c, we have to make care that the resouce size_params have become a struct member rather than a pointer to such an object. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-05net: rename skb_gso_validate_mtu -> skb_gso_validate_network_lenDaniel Axtens1-1/+1
If you take a GSO skb, and split it into packets, will the network length (L3 headers + L4 headers + payload) of those packets be small enough to fit within a given MTU? skb_gso_validate_mtu gives you the answer to that question. However, we recently added to add a way to validate the MAC length of a split GSO skb (L2+L3+L4+payload), and the names get confusing, so rename skb_gso_validate_mtu to skb_gso_validate_network_len Signed-off-by: Daniel Axtens <dja@axtens.net> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01ip6mr: Make mroute_sk rcu-basedYuval Mintz1-1/+1
In ipmr the mr_table socket is handled under RCU. Introduce the same for ip6mr. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABELBen Hutchings1-1/+1
Commit 513674b5a2c9 ("net: reevalulate autoflowlabel setting after sysctl setting") removed the initialisation of ipv6_pinfo::autoflowlabel and added a second flag to indicate whether this field or the net namespace default should be used. The getsockopt() handling for this case was not updated, so it currently returns 0 for all sockets for which IPV6_AUTOFLOWLABEL is not explicitly enabled. Fix it to return the effective value, whether that has been set at the socket or net namespace level. Fixes: 513674b5a2c9 ("net: reevalulate autoflowlabel setting after sysctl ...") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+5
Overlapping changes all over. The mini-qdisc bits were a little bit tricky, however. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15ipv6: ip6_make_skb() needs to clear cork.base.dstEric Dumazet1-0/+1
In my last patch, I missed fact that cork.base.dst was not initialized in ip6_make_skb() : If ip6_setup_cork() returns an error, we might attempt a dst_release() on some random pointer. Fixes: 862c03ee1deb ("ipv6: fix possible mem leaks in ipv6_make_skb()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15ipv6: fix udpv6 sendmsg crash caused by too small MTUMike Maloney1-2/+4
The logic in __ip6_append_data() assumes that the MTU is at least large enough for the headers. A device's MTU may be adjusted after being added while sendmsg() is processing data, resulting in __ip6_append_data() seeing any MTU. For an mtu smaller than the size of the fragmentation header, the math results in a negative 'maxfraglen', which causes problems when refragmenting any previous skb in the skb_write_queue, leaving it possibly malformed. Instead sendmsg returns EINVAL when the mtu is calculated to be less than IPV6_MIN_MTU. Found by syzkaller: kernel BUG at ./include/linux/skbuff.h:2064! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 14216 Comm: syz-executor5 Not tainted 4.13.0-rc4+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801d0b68580 task.stack: ffff8801ac6b8000 RIP: 0010:__skb_pull include/linux/skbuff.h:2064 [inline] RIP: 0010:__ip6_make_skb+0x18cf/0x1f70 net/ipv6/ip6_output.c:1617 RSP: 0018:ffff8801ac6bf570 EFLAGS: 00010216 RAX: 0000000000010000 RBX: 0000000000000028 RCX: ffffc90003cce000 RDX: 00000000000001b8 RSI: ffffffff839df06f RDI: ffff8801d9478ca0 RBP: ffff8801ac6bf780 R08: ffff8801cc3f1dbc R09: 0000000000000000 R10: ffff8801ac6bf7a0 R11: 43cb4b7b1948a9e7 R12: ffff8801cc3f1dc8 R13: ffff8801cc3f1d40 R14: 0000000000001036 R15: dffffc0000000000 FS: 00007f43d740c700(0000) GS:ffff8801dc100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7834984000 CR3: 00000001d79b9000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip6_finish_skb include/net/ipv6.h:911 [inline] udp_v6_push_pending_frames+0x255/0x390 net/ipv6/udp.c:1093 udpv6_sendmsg+0x280d/0x31a0 net/ipv6/udp.c:1363 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x352/0x5a0 net/socket.c:1750 SyS_sendto+0x40/0x50 net/socket.c:1718 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4512e9 RSP: 002b:00007f43d740bc08 EFLAGS: 00000216 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00000000007180a8 RCX: 00000000004512e9 RDX: 000000000000002e RSI: 0000000020d08000 RDI: 0000000000000005 RBP: 0000000000000086 R08: 00000000209c1000 R09: 000000000000001c R10: 0000000000040800 R11: 0000000000000216 R12: 00000000004b9c69 R13: 00000000ffffffff R14: 0000000000000005 R15: 00000000202c2000 Code: 9e 01 fe e9 c5 e8 ff ff e8 7f 9e 01 fe e9 4a ea ff ff 48 89 f7 e8 52 9e 01 fe e9 aa eb ff ff e8 a8 b6 cf fd 0f 0b e8 a1 b6 cf fd <0f> 0b 49 8d 45 78 4d 8d 45 7c 48 89 85 78 fe ff ff 49 8d 85 ba RIP: __skb_pull include/linux/skbuff.h:2064 [inline] RSP: ffff8801ac6bf570 RIP: __ip6_make_skb+0x18cf/0x1f70 net/ipv6/ip6_output.c:1617 RSP: ffff8801ac6bf570 Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Mike Maloney <maloney@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+3
BPF alignment tests got a conflict because the registers are output as Rn_w instead of just Rn in net-next, and in net a fixup for a testcase prohibits logical operations on pointers before using them. Also, we should attempt to patch BPF call args if JIT always on is enabled. Instead, if we fail to JIT the subprogs we should pass an error back up and fail immediately. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11ipv6: fix possible mem leaks in ipv6_make_skb()Eric Dumazet1-2/+3
ip6_setup_cork() might return an error, while memory allocations have been done and must be rolled back. Fixes: 6422398c2ab0 ("ipv6: introduce ipv6_make_skb") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Reported-by: Mike Maloney <maloney@google.com> Acked-by: Mike Maloney <maloney@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08netfilter: flow table support for IPv6Pablo Neira Ayuso1-1/+2
This patch adds the IPv6 flow table type, that implements the datapath flow table to forward IPv6 traffic. This patch exports ip6_dst_mtu_forward() that is required to check for mtu to pass up packets that need PMTUD handling to the classic forwarding path. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-12-27ipv6: Reinject IPv6 packets if IPsec policy matches after SNATTobias Brunner1-0/+8
If SNAT modifies the source address the resulting packet might match an IPsec policy, reinject the packet if that's the case. The exact same thing is already done for IPv4. Signed-off-by: Tobias Brunner <tobias@strongswan.org> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+10
Lots of overlapping changes. Also on the net-next side the XDP state management is handled more in the generic layers so undo the 'net' nfp fix which isn't applicable in net-next. Include a necessary change by Jakub Kicinski, with log message: ==================== cls_bpf no longer takes care of offload tracking. Make sure netdevsim performs necessary checks. This fixes a warning caused by TC trying to remove a filter it has not added. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21net: reevalulate autoflowlabel setting after sysctl settingShaohua Li1-2/+10
sysctl.ip6.auto_flowlabels is default 1. In our hosts, we set it to 2. If sockopt doesn't set autoflowlabel, outcome packets from the hosts are supposed to not include flowlabel. This is true for normal packet, but not for reset packet. The reason is ipv6_pinfo.autoflowlabel is set in sock creation. Later if we change sysctl.ip6.auto_flowlabels, the ipv6_pinfo.autoflowlabel isn't changed, so the sock will keep the old behavior in terms of auto flowlabel. Reset packet is suffering from this problem, because reset packet is sent from a special control socket, which is created at boot time. Since sysctl.ipv6.auto_flowlabels is 1 by default, the control socket will always have its ipv6_pinfo.autoflowlabel set, even after user set sysctl.ipv6.auto_flowlabels to 1, so reset packset will always have flowlabel. Normal sock created before sysctl setting suffers from the same issue. We can't even turn off autoflowlabel unless we kill all socks in the hosts. To fix this, if IPV6_AUTOFLOWLABEL sockopt is used, we use the autoflowlabel setting from user, otherwise we always call ip6_default_np_autolabel() which has the new settings of sysctl. Note, this changes behavior a little bit. Before commit 42240901f7c4 (ipv6: Implement different admin modes for automatic flow labels), the autoflowlabel behavior of a sock isn't sticky, eg, if sysctl changes, existing connection will change autoflowlabel behavior. After that commit, autoflowlabel behavior is sticky in the whole life of the sock. With this patch, the behavior isn't sticky again. Cc: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Tom Herbert <tom@quantonium.net> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30xfrm: Move dst->path into struct xfrm_dstDavid Miller1-2/+2
The first member of an IPSEC route bundle chain sets it's dst->path to the underlying ipv4/ipv6 route that carries the bundle. Stated another way, if one were to follow the xfrm_dst->child chain of the bundle, the final non-NULL pointer would be the path and point to either an ipv4 or an ipv6 route. This is largely used to make sure that PMTU events propagate down to the correct ipv4 or ipv6 route. When we don't have the top of an IPSEC bundle 'dst->path == dst'. Move it down into xfrm_dst and key off of dst->xfrm. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <edumazet@google.com>
2017-10-22ipv6: flowlabel: do not leave opt->tot_len with garbageEric Dumazet1-2/+2
When syzkaller team brought us a C repro for the crash [1] that had been reported many times in the past, I finally could find the root cause. If FlowLabel info is merged by fl6_merge_options(), we leave part of the opt_space storage provided by udp/raw/l2tp with random value in opt_space.tot_len, unless a control message was provided at sendmsg() time. Then ip6_setup_cork() would use this random value to perform a kzalloc() call. Undefined behavior and crashes. Fix is to properly set tot_len in fl6_merge_options() At the same time, we can also avoid consuming memory and cpu cycles to clear it, if every option is copied via a kmemdup(). This is the change in ip6_setup_cork(). [1] kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 6613 Comm: syz-executor0 Not tainted 4.14.0-rc4+ #127 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801cb64a100 task.stack: ffff8801cc350000 RIP: 0010:ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168 RSP: 0018:ffff8801cc357550 EFLAGS: 00010203 RAX: dffffc0000000000 RBX: ffff8801cc357748 RCX: 0000000000000010 RDX: 0000000000000002 RSI: ffffffff842bd1d9 RDI: 0000000000000014 RBP: ffff8801cc357620 R08: ffff8801cb17f380 R09: ffff8801cc357b10 R10: ffff8801cb64a100 R11: 0000000000000000 R12: ffff8801cc357ab0 R13: ffff8801cc357b10 R14: 0000000000000000 R15: ffff8801c3bbf0c0 FS: 00007f9c5c459700(0000) GS:ffff8801db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020324000 CR3: 00000001d1cf2000 CR4: 00000000001406f0 DR0: 0000000020001010 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Call Trace: ip6_make_skb+0x282/0x530 net/ipv6/ip6_output.c:1729 udpv6_sendmsg+0x2769/0x3380 net/ipv6/udp.c:1340 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x358/0x5a0 net/socket.c:1750 SyS_sendto+0x40/0x50 net/socket.c:1718 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4520a9 RSP: 002b:00007f9c5c458c08 EFLAGS: 00000216 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 00000000004520a9 RDX: 0000000000000001 RSI: 0000000020fd1000 RDI: 0000000000000016 RBP: 0000000000000086 R08: 0000000020e0afe4 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004bb1ee R13: 00000000ffffffff R14: 0000000000000016 R15: 0000000000000029 Code: e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 ea 0f 00 00 48 8d 79 04 48 b8 00 00 00 00 00 fc ff df 45 8b 74 24 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 RIP: ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168 RSP: ffff8801cc357550 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+0
Two minor conflicts in virtio_net driver (bug fix overlapping addition of a helper) and MAINTAINERS (new driver edit overlapping revamp of PHY entry). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-26ipv6: Don't increase IPSTATS_MIB_FRAGFAILS twice in ip6_fragment()Stefano Brivio1-4/+0
RFC 2465 defines ipv6IfStatsOutFragFails as: "The number of IPv6 datagrams that have been discarded because they needed to be fragmented at this output interface but could not be." The existing implementation, instead, would increase the counter twice in case we fail to allocate room for single fragments: once for the fragment, once for the datagram. This didn't look intentional though. In one of the two affected affected failure paths, the double increase was simply a result of a new 'goto fail' statement, introduced to avoid a skb leak. The other path appears to be affected since at least 2.6.12-rc2. Reported-by: Sabrina Dubroca <sdubroca@redhat.com> Fixes: 1d325d217c7f ("ipv6: ip6_fragment: fix headroom tests and skb leak") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-17inet: Stop generating UFO packets.David S. Miller1-76/+0
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert sock.sk_wmem_alloc from atomic_t to refcount_tReshetova, Elena1-2/+2
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
A set of overlapping changes in macvlan and the rocker driver, nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-23net: account for current skb length when deciding about UFOMichal Kubeček1-1/+1
Our customer encountered stuck NFS writes for blocks starting at specific offsets w.r.t. page boundary caused by networking stack sending packets via UFO enabled device with wrong checksum. The problem can be reproduced by composing a long UDP datagram from multiple parts using MSG_MORE flag: sendto(sd, buff, 1000, MSG_MORE, ...); sendto(sd, buff, 1000, MSG_MORE, ...); sendto(sd, buff, 3000, 0, ...); Assume this packet is to be routed via a device with MTU 1500 and NETIF_F_UFO enabled. When second sendto() gets into __ip_append_data(), this condition is tested (among others) to decide whether to call ip_ufo_append_data(): ((length + fragheaderlen) > mtu) || (skb && skb_is_gso(skb)) At the moment, we already have skb with 1028 bytes of data which is not marked for GSO so that the test is false (fragheaderlen is usually 20). Thus we append second 1000 bytes to this skb without invoking UFO. Third sendto(), however, has sufficient length to trigger the UFO path so that we end up with non-UFO skb followed by a UFO one. Later on, udp_send_skb() uses udp_csum() to calculate the checksum but that assumes all fragments have correct checksum in skb->csum which is not true for UFO fragments. When checking against MTU, we need to add skb->len to length of new segment if we already have a partially filled skb and fragheaderlen only if there isn't one. In the IPv6 case, skb can only be null if this is the first segment so that we have to use headersize (length of the first IPv6 header) rather than fragheaderlen (length of IPv6 header of further fragments) for skb == NULL. Fixes: e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach") Fixes: e4c5e13aa45c ("ipv6: Should use consistent conditional judgement for ip6 fragment between __ip6_append_data and ip6_finish_output") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-18ipv6: remove unnecessary dst_hold() in ip6_fragment()Wei Wang1-4/+0
In ipv6 tx path, rcu_read_lock() is taken so that dst won't get freed during the execution of ip6_fragment(). Hence, no need to hold dst in it. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg1-2/+2
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-10Remove the redundant skb->dev initialization in ip6_fragmentChenbo Feng1-1/+0
After moves the skb->dev and skb->protocol initialization into ip6_output, setting the skb->dev inside ip6_fragment is unnecessary. Fixes: 97a7a37a7b7b("ipv6: Initial skb->dev and skb->protocol in ip6_output") Signed-off-by: Chenbo Feng <fengc@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09ipv6: Initial skb->dev and skb->protocol in ip6_outputChenbo Feng1-3/+3
Move the initialization of skb->dev and skb->protocol from ip6_finish_output2 to ip6_output. This can make the skb->dev and skb->protocol information avalaible to the CGROUP eBPF filter. Signed-off-by: Chenbo Feng <fengc@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22ipv6: fix out of bound writes in __ip6_append_data()Eric Dumazet1-7/+8
Andrey Konovalov and idaifish@gmail.com reported crashes caused by one skb shared_info being overwritten from __ip6_append_data() Andrey program lead to following state : copy -4200 datalen 2000 fraglen 2040 maxfraglen 2040 alloclen 2048 transhdrlen 0 offset 0 fraggap 6200 The skb_copy_and_csum_bits(skb_prev, maxfraglen, data + transhdrlen, fraggap, 0); is overwriting skb->head and skb_shared_info Since we apparently detect this rare condition too late, move the code earlier to even avoid allocating skb and risking crashes. Once again, many thanks to Andrey and syzkaller team. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Reported-by: <idaifish@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18ipv6: Check ip6_find_1stfragopt() return value properly.David S. Miller1-4/+3
Do not use unsigned variables to see if it returns a negative error or not. Fixes: 2423496af35d ("ipv6: Prevent overrun when parsing v6 header options") Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17ipv6: Prevent overrun when parsing v6 header optionsCraig Gallek1-0/+4
The KASAN warning repoted below was discovered with a syzkaller program. The reproducer is basically: int s = socket(AF_INET6, SOCK_RAW, NEXTHDR_HOP); send(s, &one_byte_of_data, 1, MSG_MORE); send(s, &more_than_mtu_bytes_data, 2000, 0); The socket() call sets the nexthdr field of the v6 header to NEXTHDR_HOP, the first send call primes the payload with a non zero byte of data, and the second send call triggers the fragmentation path. The fragmentation code tries to parse the header options in order to figure out where to insert the fragment option. Since nexthdr points to an invalid option, the calculation of the size of the network header can made to be much larger than the linear section of the skb and data is read outside of it. This fix makes ip6_find_1stfrag return an error if it detects running out-of-bounds. [ 42.361487] ================================================================== [ 42.364412] BUG: KASAN: slab-out-of-bounds in ip6_fragment+0x11c8/0x3730 [ 42.365471] Read of size 840 at addr ffff88000969e798 by task ip6_fragment-oo/3789 [ 42.366469] [ 42.366696] CPU: 1 PID: 3789 Comm: ip6_fragment-oo Not tainted 4.11.0+ #41 [ 42.367628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1ubuntu1 04/01/2014 [ 42.368824] Call Trace: [ 42.369183] dump_stack+0xb3/0x10b [ 42.369664] print_address_description+0x73/0x290 [ 42.370325] kasan_report+0x252/0x370 [ 42.370839] ? ip6_fragment+0x11c8/0x3730 [ 42.371396] check_memory_region+0x13c/0x1a0 [ 42.371978] memcpy+0x23/0x50 [ 42.372395] ip6_fragment+0x11c8/0x3730 [ 42.372920] ? nf_ct_expect_unregister_notifier+0x110/0x110 [ 42.373681] ? ip6_copy_metadata+0x7f0/0x7f0 [ 42.374263] ? ip6_forward+0x2e30/0x2e30 [ 42.374803] ip6_finish_output+0x584/0x990 [ 42.375350] ip6_output+0x1b7/0x690 [ 42.375836] ? ip6_finish_output+0x990/0x990 [ 42.376411] ? ip6_fragment+0x3730/0x3730 [ 42.376968] ip6_local_out+0x95/0x160 [ 42.377471] ip6_send_skb+0xa1/0x330 [ 42.377969] ip6_push_pending_frames+0xb3/0xe0 [ 42.378589] rawv6_sendmsg+0x2051/0x2db0 [ 42.379129] ? rawv6_bind+0x8b0/0x8b0 [ 42.379633] ? _copy_from_user+0x84/0xe0 [ 42.380193] ? debug_check_no_locks_freed+0x290/0x290 [ 42.380878] ? ___sys_sendmsg+0x162/0x930 [ 42.381427] ? rcu_read_lock_sched_held+0xa3/0x120 [ 42.382074] ? sock_has_perm+0x1f6/0x290 [ 42.382614] ? ___sys_sendmsg+0x167/0x930 [ 42.383173] ? lock_downgrade+0x660/0x660 [ 42.383727] inet_sendmsg+0x123/0x500 [ 42.384226] ? inet_sendmsg+0x123/0x500 [ 42.384748] ? inet_recvmsg+0x540/0x540 [ 42.385263] sock_sendmsg+0xca/0x110 [ 42.385758] SYSC_sendto+0x217/0x380 [ 42.386249] ? SYSC_connect+0x310/0x310 [ 42.386783] ? __might_fault+0x110/0x1d0 [ 42.387324] ? lock_downgrade+0x660/0x660 [ 42.387880] ? __fget_light+0xa1/0x1f0 [ 42.388403] ? __fdget+0x18/0x20 [ 42.388851] ? sock_common_setsockopt+0x95/0xd0 [ 42.389472] ? SyS_setsockopt+0x17f/0x260 [ 42.390021] ? entry_SYSCALL_64_fastpath+0x5/0xbe [ 42.390650] SyS_sendto+0x40/0x50 [ 42.391103] entry_SYSCALL_64_fastpath+0x1f/0xbe [ 42.391731] RIP: 0033:0x7fbbb711e383 [ 42.392217] RSP: 002b:00007ffff4d34f28 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 42.393235] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fbbb711e383 [ 42.394195] RDX: 0000000000001000 RSI: 00007ffff4d34f60 RDI: 0000000000000003 [ 42.395145] RBP: 0000000000000046 R08: 00007ffff4d34f40 R09: 0000000000000018 [ 42.396056] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000400aad [ 42.396598] R13: 0000000000000066 R14: 00007ffff4d34ee0 R15: 00007fbbb717af00 [ 42.397257] [ 42.397411] Allocated by task 3789: [ 42.397702] save_stack_trace+0x16/0x20 [ 42.398005] save_stack+0x46/0xd0 [ 42.398267] kasan_kmalloc+0xad/0xe0 [ 42.398548] kasan_slab_alloc+0x12/0x20 [ 42.398848] __kmalloc_node_track_caller+0xcb/0x380 [ 42.399224] __kmalloc_reserve.isra.32+0x41/0xe0 [ 42.399654] __alloc_skb+0xf8/0x580 [ 42.400003] sock_wmalloc+0xab/0xf0 [ 42.400346] __ip6_append_data.isra.41+0x2472/0x33d0 [ 42.400813] ip6_append_data+0x1a8/0x2f0 [ 42.401122] rawv6_sendmsg+0x11ee/0x2db0 [ 42.401505] inet_sendmsg+0x123/0x500 [ 42.401860] sock_sendmsg+0xca/0x110 [ 42.402209] ___sys_sendmsg+0x7cb/0x930 [ 42.402582] __sys_sendmsg+0xd9/0x190 [ 42.402941] SyS_sendmsg+0x2d/0x50 [ 42.403273] entry_SYSCALL_64_fastpath+0x1f/0xbe [ 42.403718] [ 42.403871] Freed by task 1794: [ 42.404146] save_stack_trace+0x16/0x20 [ 42.404515] save_stack+0x46/0xd0 [ 42.404827] kasan_slab_free+0x72/0xc0 [ 42.405167] kfree+0xe8/0x2b0 [ 42.405462] skb_free_head+0x74/0xb0 [ 42.405806] skb_release_data+0x30e/0x3a0 [ 42.406198] skb_release_all+0x4a/0x60 [ 42.406563] consume_skb+0x113/0x2e0 [ 42.406910] skb_free_datagram+0x1a/0xe0 [ 42.407288] netlink_recvmsg+0x60d/0xe40 [ 42.407667] sock_recvmsg+0xd7/0x110 [ 42.408022] ___sys_recvmsg+0x25c/0x580 [ 42.408395] __sys_recvmsg+0xd6/0x190 [ 42.408753] SyS_recvmsg+0x2d/0x50 [ 42.409086] entry_SYSCALL_64_fastpath+0x1f/0xbe [ 42.409513] [ 42.409665] The buggy address belongs to the object at ffff88000969e780 [ 42.409665] which belongs to the cache kmalloc-512 of size 512 [ 42.410846] The buggy address is located 24 bytes inside of [ 42.410846] 512-byte region [ffff88000969e780, ffff88000969e980) [ 42.411941] The buggy address belongs to the page: [ 42.412405] page:ffffea000025a780 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 [ 42.413298] flags: 0x100000000008100(slab|head) [ 42.413729] raw: 0100000000008100 0000000000000000 0000000000000000 00000001800c000c [ 42.414387] raw: ffffea00002a9500 0000000900000007 ffff88000c401280 0000000000000000 [ 42.415074] page dumped because: kasan: bad access detected [ 42.415604] [ 42.415757] Memory state around the buggy address: [ 42.416222] ffff88000969e880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 42.416904] ffff88000969e900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 42.417591] >ffff88000969e980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 42.418273] ^ [ 42.418588] ffff88000969ea00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 42.419273] ffff88000969ea80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 42.419882] ================================================================== Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13ipv6: avoid write to a possibly cloned skbFlorian Westphal1-1/+6
ip6_fragment, in case skb has a fraglist, checks if the skb is cloned. If it is, it will move to the 'slow path' and allocates new skbs for each fragment. However, right before entering the slowpath loop, it updates the nexthdr value of the last ipv6 extension header to NEXTHDR_FRAGMENT, to account for the fragment header that will be inserted in the new ipv6-fragment skbs. In case original skb is cloned this munges nexthdr value of another skb. Avoid this by doing the nexthdr update for each of the new fragment skbs separately. This was observed with tcpdump on a bridge device where netfilter ipv6 reassembly is active: tcpdump shows malformed fragment headers as the l4 header (icmpv6, tcp, etc). is decoded as a fragment header. Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Reported-by: Andreas Karis <akaris@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-10udp: avoid ufo handling on IP payload compression packetsAlexey Kodanev1-1/+1
commit c146066ab802 ("ipv4: Don't use ufo handling on later transformed packets") and commit f89c56ce710a ("ipv6: Don't use ufo handling on later transformed packets") added a check that 'rt->dst.header_len' isn't zero in order to skip UFO, but it doesn't include IPcomp in transport mode where it equals zero. Packets, after payload compression, may not require further fragmentation, and if original length exceeds MTU, later compressed packets will be transmitted incorrectly. This can be reproduced with LTP udp_ipsec.sh test on veth device with enabled UFO, MTU is 1500 and UDP payload is 2000: * IPv4 case, offset is wrong + unnecessary fragmentation udp_ipsec.sh -p comp -m transport -s 2000 & tcpdump -ni ltp_ns_veth2 ... IP (tos 0x0, ttl 64, id 45203, offset 0, flags [+], proto Compressed IP (108), length 49) 10.0.0.2 > 10.0.0.1: IPComp(cpi=0x1000) IP (tos 0x0, ttl 64, id 45203, offset 1480, flags [none], proto UDP (17), length 21) 10.0.0.2 > 10.0.0.1: ip-proto-17 * IPv6 case, sending small fragments udp_ipsec.sh -6 -p comp -m transport -s 2000 & tcpdump -ni ltp_ns_veth2 ... IP6 (flowlabel 0x6b9ba, hlim 64, next-header Compressed IP (108) payload length: 37) fd00::2 > fd00::1: IPComp(cpi=0x1000) IP6 (flowlabel 0x6b9ba, hlim 64, next-header Compressed IP (108) payload length: 21) fd00::2 > fd00::1: IPComp(cpi=0x1000) Fix it by checking 'rt->dst.xfrm' pointer to 'xfrm_state' struct, skip UFO if xfrm is set. So the new check will include both cases: IPcomp and IPsec. Fixes: c146066ab802 ("ipv4: Don't use ufo handling on later transformed packets") Fixes: f89c56ce710a ("ipv6: Don't use ufo handling on later transformed packets") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-17 23:47:48 +0300