summaryrefslogtreecommitdiff
path: root/net/ipv6/ila
AgeCommit message (Collapse)AuthorFilesLines
2017-01-25net: Specify the owning module for lwtunnel opsRobert Shearman1-0/+1
Modules implementing lwtunnel ops should not be allowed to unload while there is state alive using those ops, so specify the owning module for all lwtunnel ops. Signed-off-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-02ila: Fix crash caused by rhashtable changesTom Herbert1-3/+13
commit ca26893f05e86 ("rhashtable: Add rhlist interface") added a field to rhashtable_iter so that length became 56 bytes and would exceed the size of args in netlink_callback (which is 48 bytes). The netlink diag dump function already has been allocating a iter structure and storing the pointed to that in the args of netlink_callback. ila_xlat also uses rhahstable_iter but is still putting that directly in the arg block. Now since rhashtable_iter size is increased we are overwriting beyond the structure. The next field happens to be cb_mutex pointer in netlink_sock and hence the crash. Fix is to alloc the rhashtable_iter and save it as pointer in arg. Tested: modprobe ila ./ip ila add loc 3333:0:0:0 loc_match 2222:0:0:1, ./ip ila list # NO crash now Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: mark families as __ro_after_initJohannes Berg1-2/+2
Now genl_register_family() is the only thing (other than the users themselves, perhaps, but I didn't find any doing that) writing to the family struct. In all families that I found, genl_register_family() is only called from __init functions (some indirectly, in which case I've add __init annotations to clarifly things), so all can actually be marked __ro_after_init. This protects the data structure from accidental corruption. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: statically initialize familiesJohannes Berg1-10/+14
Instead of providing macros/inline functions to initialize the families, make all users initialize them statically and get rid of the macros. This reduces the kernel code size by about 1.6k on x86-64 (with allyesconfig). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: no longer support using static family IDsJohannes Berg1-1/+0
Static family IDs have never really been used, the only use case was the workaround I introduced for those users that assumed their family ID was also their multicast group ID. Additionally, because static family IDs would never be reserved by the generic netlink code, using a relatively low ID would only work for built-in families that can be registered immediately after generic netlink is started, which is basically only the control family (apart from the workaround code, which I also had to add code for so it would reserve those IDs) Thus, anything other than GENL_ID_GENERATE is flawed and luckily not used except in the cases I mentioned. Move those workarounds into a few lines of code, and then get rid of GENL_ID_GENERATE entirely, making it more robust. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24lwt: Remove unused len fieldThomas Graf1-3/+1
The field is initialized by ILA and MPLS but never used. Remove it. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20ila: Fix tailroom allocation of lwtstateThomas Graf1-1/+1
Tailroom is supposed to be of length sizeof(struct ila_lwt) but sizeof(struct ila_params) is currently allocated. This leads to the dst_cache and connected member of ila_lwt being referenced out of bounds. struct ila_lwt { struct ila_params p; struct dst_cache dst_cache; u32 connected : 1; }; Fixes: 65d7ab8de582 ("net: Identifier Locator Addressing module") Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17ila: Don't use dest cache when gateway is setTom Herbert1-0/+8
If the gateway is set on an ILA route we don't need to bother with using the destination cache in the ILA route. Translation does not change the routing in this case so we can stick with orig_output in the lwstate output function. Tested: Ran netperf with and without gateway for LWT route. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-16ila: Cache a route to translated addressTom Herbert1-6/+74
Add a dst_cache to ila_lwt structure. This holds a cached route for the translated address. In ila_output we now perform a route lookup after translation and if possible (destination in original route is full 128 bits) we set the dst_cache. Subsequent calls to ila_output can then use the cache to avoid the route lookup. This eliminates the need to set the gateway on ILA routes as previously was being done. Now we can do something like: ./ip route add 3333::2000:0:0:2/128 encap ila 2222:0:0:2 \ csum-mode neutral-map dev eth0 ## No via needed! Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02ila: make nla_policy conststephen hemminger2-2/+2
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18kcm: Use stream parserTom Herbert1-1/+0
Adapt KCM to use the stream parser. This mostly involves removing the RX handling and setting up the strparser using the interface. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-16ila: Fix checksum neutral mappingTom Herbert1-5/+5
The algorithm for checksum neutral mapping is incorrect. This problem was being hidden since we were previously always performing checksum offload on the translated addresses and only with IPv6 HW csum. Enabling an ILA router shows the issue. Corrected algorithm: old_loc is the original locator in the packet, new_loc is the value to overwrite with and is found in the lookup table. old_flag is the old flag value (zero of CSUM_NEUTRAL_FLAG) and new_flag is then (old_flag ^ CSUM_NEUTRAL_FLAG) & CSUM_NEUTRAL_FLAG. Need SUM(new_id + new_flag + diff) == SUM(old_id + old_flag) for checksum neutral translation. Solving for diff gives: diff = (old_id - new_id) + (old_flag - new_flag) compute_csum_diff8(new_id, old_id) gives old_id - new_id If old_flag is set old_flag - new_flag = old_flag = CSUM_NEUTRAL_FLAG Else old_flag - new_flag = -new_flag = ~CSUM_NEUTRAL_FLAG Tested: - Implemented a user space program that creates random addresses and random locators to overwrite. Compares the checksum over the address before and after translation (must always be equal) - Enabled ILA router and showed proper operation. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08ila: Perform only one translation in forwarding pathTom Herbert4-9/+12
When setting up ILA in a router we noticed that the the encapsulation is invoked twice: once in the route input path and again upon route output. To resolve this we add a flag set_csum_neutral for the ila_update_ipv6_locator. If this flag is set and the checksum neutral bit is also set we assume that checksum-neutral translation has already been performed and take no further action. The flag is set only in ila_output path. The flag is not set for ila_input and ila_xlat. Tested: Used 3 netns to set to emulate a router and two hosts. The router translates SIR addresses between the two destinations in other two netns. Verified ping and netperf are functional. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10ila: ipv6/ila: fix nlsize calculation for lwtunnelTom Herbert1-2/+4
The handler 'ila_fill_encap_info' adds two attributes: ILA_ATTR_LOCATOR and ILA_ATTR_CSUM_MODE. nla_total_size_64bit() must be use for ILA_ATTR_LOCATOR. Also, do nla_put_u8 instead of nla_put_u64 for ILA_ATTR_CSUM_MODE. Fixes: f13a82d87b21 ("ipv6: use nla_put_u64_64bit()") Fixes: 90bfe662db13 ("ila: add checksum neutral ILA translations") Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+1
Conflicts: net/ipv4/ip_gre.c Minor conflicts between tunnel bug fixes in net and ipv6 tunnel cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03ipv6/ila: fix nlsize calculation for lwtunnelNicolas Dichtel1-2/+1
The handler 'ila_fill_encap_info' adds one attribute: ILA_ATTR_LOCATOR. Fixes: 65d7ab8de582 ("net: Identifier Locator Addressing module") CC: Tom Herbert <tom@herbertland.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26ila: add checksum neutral ILA translationsTom Herbert4-15/+105
Support checksum neutral ILA as described in the ILA draft. The low order 16 bits of the identifier are used to contain the checksum adjustment value. The csum-mode parameter is added to described checksum processing. There are three values: - adjust transport checksum (previous behavior) - do checksum neutral mapping - do nothing On output the csum-mode in the ila_params is checked and acted on. If mode is checksum neutral mapping then to mapping and set C-bit. On input, C-bit is checked. If it is set checksum-netural mapping is done (regardless of csum-mode in ila params) and C-bit will be cleared. If it is not set then action in csum-mode is taken. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26ila: xlat changesTom Herbert1-69/+34
Change model of xlat to be used only for input where lookup is done on the locator part of an address (comparing to locator_match as key in rhashtable). This is needed for checksum neutral translation which obfuscates the low order 16 bits of the identifier. It also permits hosts to be in muliple ILA domains (each locator can map to a different SIR address). A check is also added to disallow translating non-ILA addresses (check of type in identifier). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26ila: Add struct definitions and helpersTom Herbert4-82/+161
Add structures for identifiers, locators, and an ila address which is composed of a locator and identifier and in6_addr can be cast to it. This includes a three bit type field and enums for the types defined in ILA I-D. In ILA lwt don't allow user to set a translation for a non-ILA address (type of identifier is zero meaning it is an IID). This also requires that the destination prefix is at least 65 bytes (64 bit locator and first byte of identifier). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25ipv6: use nla_put_u64_64bit()Nicolas Dichtel2-7/+11
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-05rhashtable: accept GFP flags in rhashtable_walk_initBob Copeland1-1/+2
In certain cases, the 802.11 mesh pathtable code wants to iterate over all of the entries in the forwarding table from the receive path, which is inside an RCU read-side critical section. Enable walks inside atomic sections by allowing GFP_ATOMIC allocations for the walker state. Change all existing callsites to pass in GFP_KERNEL. Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Bob Copeland <me@bobcopeland.com> [also adjust gfs2/glock.c and rhashtable tests] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-22ila: autoload moduleRobert Shearman1-0/+1
Avoid users having to manually load the module by adding a module alias allowing it to be autoloaded by the lwt infra. Signed-off-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16ila: Add generic ILA translation facilityTom Herbert4-1/+691
This patch implements an ILA tanslation table. This table can be configured with identifier to locator mappings, and can be be queried to resolve a mapping. Queries can be parameterized based on interface, direction (incoming or outoing), and matching locator. The table is implemented using rhashtable and is configured via netlink (through "ip ila .." in iproute). The table may be used as alternative means to do do ILA tanslations other than the lw tunnels Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16ila: Create net/ipv6/ila directoryTom Herbert4-0/+300
Create ila directory in preparation for supporting other hooks in the kernel than LWT for doing ILA. This includes: - Moving ila.c to ila/ila_lwt.c - Splitting out some common functions into ila_common.c Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-06 18:29:24 +0300