summaryrefslogtreecommitdiff
path: root/net/ipv6/addrconf.c
AgeCommit message (Collapse)AuthorFilesLines
2013-04-14ipv6: statically link register_inet6addr_notifier()Cong Wang1-21/+3
Tomas reported the following build error: net/built-in.o: In function `ieee80211_unregister_hw': (.text+0x10f0e1): undefined reference to `unregister_inet6addr_notifier' net/built-in.o: In function `ieee80211_register_hw': (.text+0x10f610): undefined reference to `register_inet6addr_notifier' make: *** [vmlinux] Error 1 when built IPv6 as a module. So we have to statically link these symbols. Reported-by: Tomas Melin <tomas.melin@iki.fi> Cc: Tomas Melin <tomas.melin@iki.fi> Cc: "David S. Miller" <davem@davemloft.net> Cc: YOSHIFUJI Hidaki <yoshfuji@linux-ipv6.org> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02net IPv6 : Fix broken IPv6 routing table after loopback down-upBalakumaran Kannan1-0/+27
IPv6 Routing table becomes broken once we do ifdown, ifup of the loopback(lo) interface. After down-up, routes of other interface's IPv6 addresses through 'lo' are lost. IPv6 addresses assigned to all interfaces are routed through 'lo' for internal communication. Once 'lo' is down, those routing entries are removed from routing table. But those removed entries are not being re-created properly when 'lo' is brought up. So IPv6 addresses of other interfaces becomes unreachable from the same machine. Also this breaks communication with other machines because of NDISC packet processing failure. This patch fixes this issue by reading all interface's IPv6 addresses and adding them to IPv6 routing table while bringing up 'lo'. ==Testing== Before applying the patch: $ route -A inet6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2000::20/128 :: U 256 0 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo ::1/128 :: Un 0 1 0 lo 2000::20/128 :: Un 0 1 0 lo fe80::xxxx:xxxx:xxxx:xxxx/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo $ sudo ifdown lo $ sudo ifup lo $ route -A inet6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2000::20/128 :: U 256 0 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo ::1/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo $ After applying the patch: $ route -A inet6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2000::20/128 :: U 256 0 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo ::1/128 :: Un 0 1 0 lo 2000::20/128 :: Un 0 1 0 lo fe80::xxxx:xxxx:xxxx:xxxx/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo $ sudo ifdown lo $ sudo ifup lo $ route -A inet6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2000::20/128 :: U 256 0 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo ::1/128 :: Un 0 1 0 lo 2000::20/128 :: Un 0 1 0 lo fe80::xxxx:xxxx:xxxx:xxxx/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo $ Signed-off-by: Balakumaran Kannan <Balakumaran.Kannan@ap.sony.com> Signed-off-by: Maruthi Thotad <Maruthi.Thotad@ap.sony.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-25ipv6: fix bad free of addrconf_init_netHong Zhiguo1-16/+10
Signed-off-by: Hong Zhiguo <honkiko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-28hlist: drop the node parameter from iteratorsSasha Levin1-21/+11
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-18net: proc: change proc_net_remove to remove_proc_entryGao feng1-1/+1
proc_net_remove is only used to remove proc entries that under /proc/net,it's not a general function for removing proc entries of netns. if we want to remove some proc entries which under /proc/net/stat/, we still need to call remove_proc_entry. this patch use remove_proc_entry to replace proc_net_remove. we can remove proc_net_remove after this patch. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18net: proc: change proc_net_fops_create to proc_createGao feng1-1/+1
Right now, some modules such as bonding use proc_create to create proc entries under /proc/net/, and other modules such as ipv4 use proc_net_fops_create. It looks a little chaos.this patch changes all of proc_net_fops_create to proc_create. we can remove proc_net_fops_create after this patch. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11ipv6: by default join ff01::1 and in case of forwarding ff01::2 and ff05:2Hannes Frederic Sowa1-2/+13
Cc: Erik Hugne <erik.hugne@ericsson.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Conflicts: drivers/net/ethernet/intel/e1000e/ethtool.c drivers/net/vmxnet3/vmxnet3_drv.c drivers/net/wireless/iwlwifi/dvm/tx.c net/ipv6/route.c The ipv6 route.c conflict is simple, just ignore the 'net' side change as we fixed the same problem in 'net-next' by eliminating cached neighbours from ipv6 routes. The e1000e conflict is an addition of a new statistic in the ethtool code, trivial. The vmxnet3 conflict is about one change in 'net' removing a guarding conditional, whilst in 'net-next' we had a netdev_info() conversion. The iwlwifi conflict is dealing with a WARN_ON() conversion in 'net-next' vs. a revert happening in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-30ipv6 addrconf: Fix interface identifiers of 802.15.4 devices.YOSHIFUJI Hideaki / 吉藤英明1-0/+1
The "Universal/Local" (U/L) bit must be complmented according to RFC4944 and RFC2464. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29ipv4: introduce address lifetimeJiri Pirko1-4/+0
There are some usecase when lifetime of ipv4 addresses might be helpful. For example: 1) initramfs networkmanager uses a DHCP daemon to learn network configuration parameters 2) initramfs networkmanager addresses, routes and DNS configuration 3) initramfs networkmanager is requested to stop 4) initramfs networkmanager stops all daemons including dhclient 5) there are addresses and routes configured but no daemon running. If the system doesn't start networkmanager for some reason, addresses and routes will be used forever, which violates RFC 2131. This patch is essentially a backport of ivp6 address lifetime mechanism for ipv4 addresses. Current "ip" tool supports this without any patch (since it does not distinguish between ipv4 and ipv6 addresses in this perspective. Also, this should be back-compatible with all current netlink users. Reported-by: Pavel Šimerda <psimerda@redhat.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-22ipv6: Use IS_ERR_OR_NULL().YOSHIFUJI Hideaki / 吉藤英明1-2/+2
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11ipv6: use addrconf_get_prefix_route for prefix route lookup [v2]Romain Kuntz1-14/+11
Replace ip6_route_lookup() with addrconf_get_prefix_route() when looking up for a prefix route. This ensures that the connected prefix is looked up in the main table, and avoids the selection of other matching routes located in different tables as well as blackhole or prohibited entries. In addition, this fixes an Opps introduced by commit 64c6d08e (ipv6: del unreachable route when an addr is deleted on lo), that would occur when a blackhole or prohibited entry is selected by ip6_route_lookup(). Such entries have a NULL rt6i_table argument, which is accessed by __ip6_del_rt() when trying to lock rt6i_table->tb6_lock. The function addrconf_is_prefix_route() is not used anymore and is removed. [v2] Minor indentation cleanup and log updates. Signed-off-by: Romain Kuntz <r.kuntz@ipflavors.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11ipv6: fix the noflags test in addrconf_get_prefix_routeRomain Kuntz1-1/+1
The tests on the flags in addrconf_get_prefix_route() does no make much sense: the 'noflags' parameter contains the set of flags that must not match with the route flags, so the test must be done against 'noflags', and not against 'flags'. Signed-off-by: Romain Kuntz <r.kuntz@ipflavors.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-20ipv6: addrconf.c: remove unnecessary "if"Cong Ding1-2/+1
the value of err is always negative if it goes to errout, so we don't need to check the value of err. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04ipv6: Protect ->mc_forwarding access with CONFIG_IPV6_MROUTEDavid S. Miller1-1/+4
Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-04netconf: advertise mc_forwarding statusNicolas Dichtel1-2/+8
This patch advertise the MC_FORWARDING status for IPv4 and IPv6. This field is readonly, only multicast engine in the kernel updates it. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03ipv6: Make 'addrconf_rs_timer' send Router Solicitations (and re-arm itself) ↵Shmulik Ladkani1-1/+1
if Router Advertisements are accepted As of 026359b [ipv6: Send ICMPv6 RSes only when RAs are accepted], Router Solicitations are sent whenever kernel accepts Router Advertisements on the interface. However, this logic isn't reflected in 'addrconf_rs_timer'. The timer fails to issue subsequent RS messages (and fails to re-arm itself) if forwarding is enabled and the special hybrid mode is enabled (accept_ra=2). Fix the condition determining whether next RS should be sent, by using 'ipv6_accept_ra()'. Reported-by: Ami Koren <amikoren@yahoo.com> Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-01ipv6: unify logic evaluating inet6_dev's accept_ra propertyShmulik Ladkani1-2/+1
As of 026359b [ipv6: Send ICMPv6 RSes only when RAs are accepted], the logic determining whether to send Router Solicitations is identical to the logic determining whether kernel accepts Router Advertisements. However the condition itself is repeated in several code locations. Unify it by introducing 'ipv6_accept_ra()' accessor. Also, simplify the condition expression, making it more readable. No semantic change. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-19net: Enable a userns root rtnl calls that are safe for unprivilged usersEric W. Biederman1-6/+0
- Only allow moving network devices to network namespaces you have CAP_NET_ADMIN privileges over. - Enable creating/deleting/modifying interfaces - Enable adding/deleting addresses - Enable adding/setting/deleting neighbour entries - Enable adding/removing routes - Enable adding/removing fib rules - Enable setting the forwarding state - Enable adding/removing ipv6 address labels - Enable setting bridge parameter Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-19net: Enable some sysctls that are safe for the userns rootEric W. Biederman1-4/+0
- Enable the per device ipv4 sysctls: net/ipv4/conf/<if>/forwarding net/ipv4/conf/<if>/mc_forwarding net/ipv4/conf/<if>/accept_redirects net/ipv4/conf/<if>/secure_redirects net/ipv4/conf/<if>/shared_media net/ipv4/conf/<if>/rp_filter net/ipv4/conf/<if>/send_redirects net/ipv4/conf/<if>/accept_source_route net/ipv4/conf/<if>/accept_local net/ipv4/conf/<if>/src_valid_mark net/ipv4/conf/<if>/proxy_arp net/ipv4/conf/<if>/medium_id net/ipv4/conf/<if>/bootp_relay net/ipv4/conf/<if>/log_martians net/ipv4/conf/<if>/tag net/ipv4/conf/<if>/arp_filter net/ipv4/conf/<if>/arp_announce net/ipv4/conf/<if>/arp_ignore net/ipv4/conf/<if>/arp_accept net/ipv4/conf/<if>/arp_notify net/ipv4/conf/<if>/proxy_arp_pvlan net/ipv4/conf/<if>/disable_xfrm net/ipv4/conf/<if>/disable_policy net/ipv4/conf/<if>/force_igmp_version net/ipv4/conf/<if>/promote_secondaries net/ipv4/conf/<if>/route_localnet - Enable the global ipv4 sysctl: net/ipv4/ip_forward - Enable the per device ipv6 sysctls: net/ipv6/conf/<if>/forwarding net/ipv6/conf/<if>/hop_limit net/ipv6/conf/<if>/mtu net/ipv6/conf/<if>/accept_ra net/ipv6/conf/<if>/accept_redirects net/ipv6/conf/<if>/autoconf net/ipv6/conf/<if>/dad_transmits net/ipv6/conf/<if>/router_solicitations net/ipv6/conf/<if>/router_solicitation_interval net/ipv6/conf/<if>/router_solicitation_delay net/ipv6/conf/<if>/force_mld_version net/ipv6/conf/<if>/use_tempaddr net/ipv6/conf/<if>/temp_valid_lft net/ipv6/conf/<if>/temp_prefered_lft net/ipv6/conf/<if>/regen_max_retry net/ipv6/conf/<if>/max_desync_factor net/ipv6/conf/<if>/max_addresses net/ipv6/conf/<if>/accept_ra_defrtr net/ipv6/conf/<if>/accept_ra_pinfo net/ipv6/conf/<if>/accept_ra_rtr_pref net/ipv6/conf/<if>/router_probe_interval net/ipv6/conf/<if>/accept_ra_rt_info_max_plen net/ipv6/conf/<if>/proxy_ndp net/ipv6/conf/<if>/accept_source_route net/ipv6/conf/<if>/optimistic_dad net/ipv6/conf/<if>/mc_forwarding net/ipv6/conf/<if>/disable_ipv6 net/ipv6/conf/<if>/accept_dad net/ipv6/conf/<if>/force_tllao - Enable the global ipv6 sysctls: net/ipv6/bindv6only net/ipv6/icmp/ratelimit Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-19net: Allow userns root to control ipv6Eric W. Biederman1-2/+2
Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) and capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns, CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls. Settings that merely control a single network device are allowed. Either the network device is a logical network device where restrictions make no difference or the network device is hardware NIC that has been explicity moved from the initial network namespace. In general policy and network stack state changes are allowed while resource control is left unchanged. Allow the SIOCSIFADDR ioctl to add ipv6 addresses. Allow the SIOCDIFADDR ioctl to delete ipv6 addresses. Allow the SIOCADDRT ioctl to add ipv6 routes. Allow the SIOCDELRT ioctl to delete ipv6 routes. Allow creation of ipv6 raw sockets. Allow setting the IPV6_JOIN_ANYCAST socket option. Allow setting the IPV6_FL_A_RENEW parameter of the IPV6_FLOWLABEL_MGR socket option. Allow setting the IPV6_TRANSPARENT socket option. Allow setting the IPV6_HOPOPTS socket option. Allow setting the IPV6_RTHDRDSTOPTS socket option. Allow setting the IPV6_DSTOPTS socket option. Allow setting the IPV6_IPSEC_POLICY socket option. Allow setting the IPV6_XFRM_POLICY socket option. Allow sending packets with the IPV6_2292HOPOPTS control message. Allow sending packets with the IPV6_2292DSTOPTS control message. Allow sending packets with the IPV6_RTHDRDSTOPTS control message. Allow setting the multicast routing socket options on non multicast routing sockets. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL, and SIOCDELTUNNEL ioctls for setting up, changing and deleting tunnels over ipv6. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL, SIOCDELTUNNEL ioctls for setting up, changing and deleting ipv6 over ipv4 tunnels. Allow the SIOCADDPRL, SIOCDELPRL, SIOCCHGPRL ioctls for adding, deleting, and changing the potential router list for ISATAP tunnels. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-19net: Push capable(CAP_NET_ADMIN) into the rtnl methodsEric W. Biederman1-0/+6
- In rtnetlink_rcv_msg convert the capable(CAP_NET_ADMIN) check to ns_capable(net->user-ns, CAP_NET_ADMIN). Allowing unprivileged users to make netlink calls to modify their local network namespace. - In the rtnetlink doit methods add capable(CAP_NET_ADMIN) so that calls that are not safe for unprivileged users are still protected. Later patches will remove the extra capable calls from methods that are safe for unprivilged users. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-19net: Don't export sysctls to unprivileged usersEric W. Biederman1-0/+4
In preparation for supporting the creation of network namespaces by unprivileged users, modify all of the per net sysctl exports and refuse to allow them to unprivileged users. This makes it safe for unprivileged users in general to access per net sysctls, and allows sysctls to be exported to unprivileged users on an individual basis as they are deemed safe. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13ipv6: add knob to send unsolicited ND on link-layer address changeHannes Frederic Sowa1-0/+8
This patch introduces a new knob ndisc_notify. If enabled, the kernel will transmit an unsolicited neighbour advertisement on link-layer address change to update the neighbour tables of the corresponding hosts more quickly. This is the equivalent to arp_notify in ipv4 world. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03ipv6: introduce ip6_rt_put()Amerigo Wang1-4/+3
As suggested by Eric, we could introduce a helper function for ipv6 too, to avoid checking if rt is NULL before dst_release(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03ipv6: remove a useless NULL checkAmerigo Wang1-1/+1
In dev_forward_change(), it is useless to check if idev->dev is NULL, it is always non-NULL here. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01ipv6: use IS_ENABLED()Amerigo Wang1-10/+10
#if defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE) can be replaced by #if IS_ENABLED(CONFIG_FOO) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-29rtnl/ipv6: add support of RTM_GETNETCONFNicolas Dichtel1-2/+73
This message allows to get the devconf for an interface. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-29rtnl/ipv6: use netconf msg to advertise forwarding statusNicolas Dichtel1-0/+77
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-16ipv6: addrconf: fix /proc/net/if_inet6Eric Dumazet1-6/+9
Commit 1d5783030a1 (ipv6/addrconf: speedup /proc/net/if_inet6 filling) added bugs hiding some devices from if_inet6 and breaking applications. "ip -6 addr" could still display all IPv6 addresses, while "ifconfig -a" couldnt. One way to reproduce the bug is by starting in a shell : unshare -n /bin/bash ifconfig lo up And in original net namespace, lo device disappeared from if_inet6 Reported-by: Jan Hinnerk Stosch <janhinnerk.stosch@gmail.com> Tested-by: Jan Hinnerk Stosch <janhinnerk.stosch@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mihai Maruseac <mihai.maruseac@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-03ipv6: don't add link local route when there is no link local addressNicolas Dichtel1-13/+2
When an address is added on loopback (ip -6 a a 2002::1/128 dev lo), a route to fe80::/64 is added in the main table: unreachable fe80::/64 dev lo proto kernel metric 256 error -101 This route does not match any prefix (no fe80:: address on lo). In fact, addrconf_dev_config() will not add link local address because this function filters interfaces by type. If the link local address is added manually, the route to the link local prefix will be automatically added by addrconf_add_linklocal(). Note also, that this route is not deleted when the address is removed. After looking at the code, it seems that addrconf_add_lroute() is redundant with addrconf_add_linklocal(), because this function will add the link local route when the link local address is configured. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-02ipv6: del unreachable route when an addr is deleted on loNicolas Dichtel1-2/+8
When an address is added on loopback (ip -6 a a 2002::1/128 dev lo), two routes are added: - one in the local table: local 2002::1 via :: dev lo proto none metric 0 - one the in main table (for the prefix): unreachable 2002::1 dev lo proto kernel metric 256 error -101 When the address is deleted, the route inserted in the main table remains because we use rt6_lookup(), which returns NULL when dst->error is set, which is the case here! Thus, it is better to use ip6_route_lookup() to avoid this kind of filter. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-14ipv6: replace write lock with read lock when get route infoLi RongQing1-2/+2
geting route info does not write rt->rt6i_table, so replace write lock with read lock Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-14ipv6: Compare addresses only bits up to the prefix length (RFC6724).YOSHIFUJI Hideaki / 吉藤英明1-2/+4
Compare bits up to the source address's prefix length only to allows DNS load balancing to continue to be used as a tie breaker. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-10netlink: Rename pid to portid to avoid confusionEric W. Biederman1-16/+16
It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextPablo Neira Ayuso1-27/+8
This merges (3f509c6 netfilter: nf_nat_sip: fix incorrect handling of EBUSY for RTCP expectation) to Patrick McHardy's IPv6 NAT changes.
2012-09-01ipv6: remove some deadcodeSorin Dumitru1-22/+7
__ipv6_regen_rndid no longer returns anything other than 0 so there's no point in verifying what it returns Signed-off-by: Sorin Dumitru <sdumitru@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30netfilter: ip6tables: add MASQUERADE targetPatrick McHardy1-1/+1
Signed-off-by: Patrick McHardy <kaber@trash.net>
2012-08-23net: reinstate rtnl in call_netdevice_notifiers()Eric Dumazet1-5/+1
Eric Biederman pointed out that not holding RTNL while calling call_netdevice_notifiers() was racy. This patch is a direct transcription his feedback against commit 0115e8e30d6fc (net: remove delay at device dismantle) Thanks Eric ! Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-23net: remove delay at device dismantleEric Dumazet1-1/+5
I noticed extra one second delay in device dismantle, tracked down to a call to dst_dev_event() while some call_rcu() are still in RCU queues. These call_rcu() were posted by rt_free(struct rtable *rt) calls. We then wait a little (but one second) in netdev_wait_allrefs() before kicking again NETDEV_UNREGISTER. As the call_rcu() are now completed, dst_dev_event() can do the needed device swap on busy dst. To solve this problem, add a new NETDEV_UNREGISTER_FINAL, called after a rcu_barrier(), but outside of RTNL lock. Use NETDEV_UNREGISTER_FINAL with care ! Change dst_dev_event() handler to react to NETDEV_UNREGISTER_FINAL Also remove NETDEV_UNREGISTER_BATCH, as its not used anymore after IP cache removal. With help from Gao feng Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15ipv6: addrconf: Avoid calling netdevice notifiers with RCU read-side lockBen Hutchings1-3/+1
Cong Wang reports that lockdep detected suspicious RCU usage while enabling IPV6 forwarding: [ 1123.310275] =============================== [ 1123.442202] [ INFO: suspicious RCU usage. ] [ 1123.558207] 3.6.0-rc1+ #109 Not tainted [ 1123.665204] ------------------------------- [ 1123.768254] include/linux/rcupdate.h:430 Illegal context switch in RCU read-side critical section! [ 1123.992320] [ 1123.992320] other info that might help us debug this: [ 1123.992320] [ 1124.307382] [ 1124.307382] rcu_scheduler_active = 1, debug_locks = 0 [ 1124.522220] 2 locks held by sysctl/5710: [ 1124.648364] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81768498>] rtnl_trylock+0x15/0x17 [ 1124.882211] #1: (rcu_read_lock){.+.+.+}, at: [<ffffffff81871df8>] rcu_lock_acquire+0x0/0x29 [ 1125.085209] [ 1125.085209] stack backtrace: [ 1125.332213] Pid: 5710, comm: sysctl Not tainted 3.6.0-rc1+ #109 [ 1125.441291] Call Trace: [ 1125.545281] [<ffffffff8109d915>] lockdep_rcu_suspicious+0x109/0x112 [ 1125.667212] [<ffffffff8107c240>] rcu_preempt_sleep_check+0x45/0x47 [ 1125.781838] [<ffffffff8107c260>] __might_sleep+0x1e/0x19b [...] [ 1127.445223] [<ffffffff81757ac5>] call_netdevice_notifiers+0x4a/0x4f [...] [ 1127.772188] [<ffffffff8175e125>] dev_disable_lro+0x32/0x6b [ 1127.885174] [<ffffffff81872d26>] dev_forward_change+0x30/0xcb [ 1128.013214] [<ffffffff818738c4>] addrconf_forward_change+0x85/0xc5 [...] addrconf_forward_change() uses RCU iteration over the netdev list, which is unnecessary since it already holds the RTNL lock. We also cannot reasonably require netdevice notifier functions not to sleep. Reported-by: Cong Wang <amwang@redhat.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-18ipv6: add ipv6_addr_hash() helperEric Dumazet1-13/+8
Introduce ipv6_addr_hash() helper doing a XOR on all bits of an IPv6 address, with an optimized x86_64 version. Use it in flow dissector, as suggested by Andrew McGregor, to reduce hash collision probabilities in fq_codel (and other users of flow dissector) Use it in ip6_tunnel.c and use more bit shuffling, as suggested by David Laight, as existing hash was ignoring most of them. Use it in sunrpc and use more bit shuffling, using hash_32(). Use it in net/ipv6/addrconf.c, using hash_32() as well. As a cleanup, use it in net/ipv4/tcp_metrics.c Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrew McGregor <andrewmcgr@gmail.com> Cc: Dave Taht <dave.taht@gmail.com> Cc: Tom Herbert <therbert@google.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16Merge branch 'delete-tokenring' of ↵David S. Miller1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
2012-05-16net: ipv4 and ipv6: Convert printk(KERN_DEBUG to pr_debugJoe Perches1-9/+8
Use the current debugging style and enable dynamic_debug. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16net: ipv6: Standardize prefixes for message loggingJoe Perches1-30/+23
Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16net: delete all instances of special processing for token ringPaul Gortmaker1-2/+0
We are going to delete the Token ring support. This removes any special processing in the core networking for token ring, (aside from net/tr.c itself), leaving the drivers and remaining tokenring support present but inert. The mass removal of the drivers and net/tr.c will be in a separate commit, so that the history of these files that we still care about won't have the giant deletion tied into their history. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-05-15net: Convert net_ratelimit uses to net_<level>_ratelimitedJoe Perches1-10/+7
Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-116lowpan: IPv6 link local addressalex.bluesman.smirnov@gmail.com1-1/+13
According to the RFC4944 (Transmission of IPv6 Packets over IEEE 802.15.4 Networks), chapter 7: The IPv6 link-local address [RFC4291] for an IEEE 802.15.4 interface is formed by appending the Interface Identifier, as defined above, to the prefix FE80::/64. 10 bits 54 bits 64 bits +----------+-----------------------+----------------------------+ |1111111010| (zeros) | Interface Identifier | +----------+-----------------------+----------------------------+ This patch adds IPv6 address generation support for the 6lowpan interfaces. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21net ipv6: Convert addrconf to use register_net_sysctlEric W. Biederman1-28/+4
Using an ascii path to register_net_sysctl as opposed to the slightly awkward ctl_path allows for much simpler code. We no longer need to malloc dev_name to keep it alive the length of our sysctl register instead we can use a small temporary buffer on the stack. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-6/+3
Conflicts: drivers/net/ethernet/atheros/atlx/atl1.c drivers/net/ethernet/atheros/atlx/atl1.h Resolved a conflict between a DMA error bug fix and NAPI support changes in the atl1 driver. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 18:17:16 +0300