summaryrefslogtreecommitdiff
path: root/net/ipv4/udp_offload.c
AgeCommit message (Collapse)AuthorFilesLines
2018-12-16udp: use indirect call wrappers for GRO socket lookupPaolo Abeni1-2/+6
This avoids another indirect call for UDP GRO. Again, the test for the IPv6 variant is performed first. v1 -> v2: - adapted to INDIRECT_CALL_ changes Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: use indirect call wrappers at GRO transport layerPaolo Abeni1-3/+4
This avoids an indirect call in the receive path for TCP and UDP packets. TCP takes precedence on UDP, so that we have a single additional conditional in the common case. When IPV6 is build as module, all gro symbols except UDPv6 are builtin, while the latter belong to the ipv6 module, so we need some special care. v1 -> v2: - adapted to INDIRECT_CALL_ changes v2 -> v3: - fix build issue with CONFIG_IPV6=m Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08udp: implement GRO for plain UDP sockets.Paolo Abeni1-22/+87
This is the RX counterpart of commit bec1f6f69736 ("udp: generate gso with UDP_SEGMENT"). When UDP_GRO is enabled, such socket is also eligible for GRO in the rx path: UDP segments directed to such socket are assembled into a larger GSO_UDP_L4 packet. The core UDP GRO support is enabled with setsockopt(UDP_GRO). Initial benchmark numbers: Before: udp rx: 1079 MB/s 769065 calls/s After: udp rx: 1466 MB/s 24877 calls/s This change introduces a side effect in respect to UDP tunnels: after a UDP tunnel creation, now the kernel performs a lookup per ingress UDP packet, while before such lookup happened only if the ingress packet carried a valid internal header csum. rfc v2 -> rfc v3: - fixed typos in macro name and comments - really enforce UDP_GRO_CNT_MAX, instead of UDP_GRO_CNT_MAX + 1 - acquire socket lock in UDP_GRO setsockopt rfc v1 -> rfc v2: - use a new option to enable UDP GRO - use static keys to protect the UDP GRO socket lookup Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05udp: gro behind static keyWillem de Bruijn1-1/+1
Avoid the socket lookup cost in udp_gro_receive if no socket has a udp tunnel callback configured. udp_sk(sk)->gro_receive requires a registration with setup_udp_tunnel_sock, which enables the static key. Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-03Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Simple overlapping changes in stmmac driver. Adjust skb_gro_flush_final_remcsum function signature to make GRO list changes in net-next, as per Stephen Rothwell's example merge resolution. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02net: fix use-after-free in GRO with ESPSabrina Dubroca1-1/+1
Since the addition of GRO for ESP, gro_receive can consume the skb and return -EINPROGRESS. In that case, the lower layer GRO handler cannot touch the skb anymore. Commit 5f114163f2f5 ("net: Add a skb_gro_flush_final helper.") converted some of the gro_receive handlers that can lead to ESP's gro_receive so that they wouldn't access the skb when -EINPROGRESS is returned, but missed other spots, mainly in tunneling protocols. This patch finishes the conversion to using skb_gro_flush_final(), and adds a new helper, skb_gro_flush_final_remcsum(), used in VXLAN and GUE. Fixes: 5f114163f2f5 ("net: Add a skb_gro_flush_final helper.") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26net: Convert GRO SKB handling to list_head.David Miller1-6/+7
Manage pending per-NAPI GRO packets via list_head. Return an SKB pointer from the GRO receive handlers. When GRO receive handlers return non-NULL, it means that this SKB needs to be completed at this time and removed from the NAPI queue. Several operations are greatly simplified by this transformation, especially timing out the oldest SKB in the list when gro_count exceeds MAX_GRO_SKBS, and napi_gro_flush() which walks the queue in reverse order. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11udp: avoid refcount_t saturation in __udp_gso_segment()Eric Dumazet1-3/+11
For some reason, Willem thought that the issue we fixed for TCP in commit 7ec318feeed1 ("tcp: gso: avoid refcount_t warning from tcp_gso_segment()") was not relevant for UDP GSO. But syzbot found its way. refcount_t: saturated; leaking memory. WARNING: CPU: 0 PID: 10261 at lib/refcount.c:78 refcount_add_not_zero+0x2d4/0x320 lib/refcount.c:78 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 10261 Comm: syz-executor5 Not tainted 4.17.0-rc3+ #38 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 panic+0x22f/0x4de kernel/panic.c:184 __warn.cold.8+0x163/0x1b3 kernel/panic.c:536 report_bug+0x252/0x2d0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] do_error_trap+0x1de/0x490 arch/x86/kernel/traps.c:296 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:992 RIP: 0010:refcount_add_not_zero+0x2d4/0x320 lib/refcount.c:78 RSP: 0018:ffff880196db6b90 EFLAGS: 00010282 RAX: 0000000000000026 RBX: 00000000ffffff01 RCX: ffffc900040d9000 RDX: 0000000000004a29 RSI: ffffffff8160f6f1 RDI: ffff880196db66f0 RBP: ffff880196db6c78 R08: ffff8801b33d6740 R09: 0000000000000002 R10: ffff8801b33d6740 R11: 0000000000000000 R12: 0000000000000000 R13: 00000000ffffffff R14: ffff880196db6c50 R15: 0000000000020101 refcount_add+0x1b/0x70 lib/refcount.c:102 __udp_gso_segment+0xaa5/0xee0 net/ipv4/udp_offload.c:272 udp4_ufo_fragment+0x592/0x7a0 net/ipv4/udp_offload.c:301 inet_gso_segment+0x639/0x12b0 net/ipv4/af_inet.c:1342 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 __skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865 skb_gso_segment include/linux/netdevice.h:4050 [inline] validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3122 __dev_queue_xmit+0xbf8/0x34c0 net/core/dev.c:3579 dev_queue_xmit+0x17/0x20 net/core/dev.c:3620 neigh_direct_output+0x15/0x20 net/core/neighbour.c:1401 neigh_output include/net/neighbour.h:483 [inline] ip_finish_output2+0xa5f/0x1840 net/ipv4/ip_output.c:229 ip_finish_output+0x828/0xf80 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:277 [inline] ip_output+0x21b/0x850 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] ip_local_out+0xc5/0x1b0 net/ipv4/ip_output.c:124 ip_send_skb+0x40/0xe0 net/ipv4/ip_output.c:1434 udp_send_skb.isra.37+0x5eb/0x1000 net/ipv4/udp.c:825 udp_push_pending_frames+0x5c/0xf0 net/ipv4/udp.c:853 udp_v6_push_pending_frames+0x380/0x3e0 net/ipv6/udp.c:1105 udp_lib_setsockopt+0x59a/0x600 net/ipv4/udp.c:2403 udpv6_setsockopt+0x95/0xa0 net/ipv6/udp.c:1447 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3046 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903 __do_sys_setsockopt net/socket.c:1914 [inline] __se_sys_setsockopt net/socket.c:1911 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: ad405857b174 ("udp: better wmem accounting on gso") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-09udp: Do not copy destructor if one is not presentAlexander Duyck1-8/+14
This patch makes it so that if a destructor is not present we avoid trying to update the skb socket or any reference counting that would be associated with the NULL socket and/or descriptor. By doing this we can support traffic coming from another namespace without any issues. Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-09udp: Add support for software checksum and GSO_PARTIAL with GSO offloadAlexander Duyck1-10/+19
This patch adds support for a software provided checksum and GSO_PARTIAL segmentation support. With this we can offload UDP segmentation on devices that only have partial support for tunnels. Since we are no longer needing the hardware checksum we can drop the checks in the segmentation code that were verifying if it was present. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-09udp: Partially unroll handling of first segment and last segmentAlexander Duyck1-14/+19
This patch allows us to take care of unrolling the first segment and the last segment of the loop for processing the segmented skb. Part of the motivation for this is that it makes it easier to process the fact that the first fame and all of the frames in between should be mostly identical in terms of header data, and the last frame has differences in the length and partial checksum. In addition I am dropping the header length calculation since we don't really need it for anything but the last frame and it can be easily obtained by just pulling the data_len and offset of tail from the transport header. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-09udp: Do not pass checksum as a parameter to GSO segmentationAlexander Duyck1-14/+18
This patch is meant to allow us to avoid having to recompute the checksum from scratch and have it passed as a parameter. Instead of taking that approach we can take advantage of the fact that the length that was used to compute the existing checksum is included in the UDP header. Finally to avoid the need to invert the result we can just call csum16_add and csum16_sub directly. By doing this we can avoid a number of instructions in the loop that is handling segmentation. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-09udp: Do not pass MSS as parameter to GSO segmentationAlexander Duyck1-2/+4
There is no point in passing MSS as a parameter for for the GSO segmentation call as it is already available via the shared info for the skb itself. Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02udp: Complement partial checksum for GSO packetSean Tranchetti1-0/+1
Using the udp_v4_check() function to calculate the pseudo header for the newly segmented UDP packets results in assigning the complement of the value to the UDP header checksum field. Always undo the complement the partial checksum value in order to match the case where GSO is not used on the UDP transmit path. Fixes: ee80d1ebe5ba ("udp: add udp gso") Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-28udp: remove stray export symbolWillem de Bruijn1-1/+0
UDP GSO needs to export __udp_gso_segment to call it from ipv6. I accidentally exported static ipv4 function __udp4_gso_segment. Remove that EXPORT_SYMBOL_GPL. Fixes: ee80d1ebe5ba ("udp: add udp gso") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-26udp: better wmem accounting on gsoWillem de Bruijn1-1/+15
skb_segment by default transfers allocated wmem from the gso skb to the tail of the segment list. This underreports real truesize of the list, especially if the tail might be dropped. Similar to tcp_gso_segment, update wmem_alloc with the aggregate list truesize and make each segment responsible for its own share by setting skb->destructor. Clear gso_skb->destructor prior to calling skb_segment to skip the default assignment to tail. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-26udp: add udp gsoWillem de Bruijn1-1/+52
Implement generic segmentation offload support for udp datagrams. A follow-up patch adds support to the protocol stack to generate such packets. UDP GSO is not UFO. UFO fragments a single large datagram. GSO splits a large payload into a number of discrete UDP datagrams. The implementation adds a GSO type SKB_UDP_GSO_L4 to differentiate it from UFO (SKB_UDP_GSO). IPPROTO_UDPLITE is excluded, as that protocol has no gso handler registered. [ Export __udp_gso_segment for ipv6. -DaveM ] Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23gso: validate gso_type in GSO handlersWillem de Bruijn1-0/+3
Validate gso_type during segmentation as SKB_GSO_DODGY sources may pass packets where the gso_type does not match the contents. Syzkaller was able to enter the SCTP gso handler with a packet of gso_type SKB_GSO_TCPV4. On entry of transport layer gso handlers, verify that the gso_type matches the transport protocol. Fixes: 90017accff61 ("sctp: Add GSO support") Link: http://lkml.kernel.org/r/<001a1137452496ffc305617e5fe0@google.com> Reported-by: syzbot+fee64147a25aecd48055@syzkaller.appspotmail.com Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-23net: accept UFO datagrams from tuntap and packetWillem de Bruijn1-4/+45
Tuntap and similar devices can inject GSO packets. Accept type VIRTIO_NET_HDR_GSO_UDP, even though not generating UFO natively. Processes are expected to use feature negotiation such as TUNSETOFFLOAD to detect supported offload types and refrain from injecting other packets. This process breaks down with live migration: guest kernels do not renegotiate flags, so destination hosts need to expose all features that the source host does. Partially revert the UFO removal from 182e0b6b5846~1..d9d30adf5677. This patch introduces nearly(*) no new code to simplify verification. It brings back verbatim tuntap UFO negotiation, VIRTIO_NET_HDR_GSO_UDP insertion and software UFO segmentation. It does not reinstate protocol stack support, hardware offload (NETIF_F_UFO), SKB_GSO_UDP tunneling in SKB_GSO_SOFTWARE or reception of VIRTIO_NET_HDR_GSO_UDP packets in tuntap. To support SKB_GSO_UDP reappearing in the stack, also reinstate logic in act_csum and openvswitch. Achieve equivalence with v4.13 HEAD by squashing in commit 939912216fa8 ("net: skb_needs_check() removes CHECKSUM_UNNECESSARY check for tx.") and reverting commit 8d63bee643f1 ("net: avoid skb_warn_bad_offload false positives on UFO"). (*) To avoid having to bring back skb_shinfo(skb)->ip6_frag_id, ipv6_proxy_select_ident is changed to return a __be32 and this is assigned directly to the frag_hdr. Also, SKB_GSO_UDP is inserted at the end of the enum to minimize code churn. Tested Booted a v4.13 guest kernel with QEMU. On a host kernel before this patch `ethtool -k eth0` shows UFO disabled. After the patch, it is enabled, same as on a v4.13 host kernel. A UFO packet sent from the guest appears on the tap device: host: nc -l -p -u 8000 & tcpdump -n -i tap0 guest: dd if=/dev/zero of=payload.txt bs=1 count=2000 nc -u 192.16.1.1 8000 < payload.txt Direct tap to tap transmission of VIRTIO_NET_HDR_GSO_UDP succeeds, packets arriving fragmented: ./with_tap_pair.sh ./tap_send_ufo tap0 tap1 (from https://github.com/wdebruij/kerneltools/tree/master/tests) Changes v1 -> v2 - simplified set_offload change (review comment) - documented test procedure Link: http://lkml.kernel.org/r/<CAF=yD-LuUeDuL9YWPJD9ykOZ0QCjNeznPDr6whqZ9NGMNF12Mw@mail.gmail.com> Fixes: fb652fdfe837 ("macvlan/macvtap: Remove NETIF_F_UFO advertisement.") Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-08gso: fix payload length when gso_size is zeroAlexey Kodanev1-1/+1
When gso_size reset to zero for the tail segment in skb_segment(), later in ipv6_gso_segment(), __skb_udp_tunnel_segment() and gre_gso_segment() we will get incorrect results (payload length, pcsum) for that segment. inet_gso_segment() already has a check for gso_size before calculating payload. The issue was found with LTP vxlan & gre tests over ixgbe NIC. Fixes: 07b26c9454a2 ("gso: Support partial splitting at the frag_list pointer") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-17inet: Remove software UFO fragmenting code.David S. Miller1-54/+4
Rename udp{4,6}_ufo_fragment() to udp{4,6}_tunnel_segment() and only handle tunnel segmentation. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-17net: Remove all references to SKB_GSO_UDP.David S. Miller1-4/+2
Such packets are no longer possible. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24udp: disable inner UDP checksum offloads in IPsec caseAnsis Atteka1-0/+3
Otherwise, UDP checksum offloads could corrupt ESP packets by attempting to calculate UDP checksum when this inner UDP packet is already protected by IPsec. One way to reproduce this bug is to have a VM with virtio_net driver (UFO set to ON in the guest VM); and then encapsulate all guest's Ethernet frames in Geneve; and then further encrypt Geneve with IPsec. In this case following symptoms are observed: 1. If using ixgbe NIC, then it will complain with following error message: ixgbe 0000:01:00.1: partial checksum but l4 proto=32! 2. Receiving IPsec stack will drop all the corrupted ESP packets and increase XfrmInStateProtoError counter in /proc/net/xfrm_stat. 3. iperf UDP test from the VM with packet sizes above MTU will not work at all. 4. iperf TCP test from the VM will get ridiculously low performance because. Signed-off-by: Ansis Atteka <aatteka@ovn.org> Co-authored-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: add recursion limit to GROSabrina Dubroca1-1/+1
Currently, GRO can do unlimited recursion through the gro_receive handlers. This was fixed for tunneling protocols by limiting tunnel GRO to one level with encap_mark, but both VLAN and TEB still have this problem. Thus, the kernel is vulnerable to a stack overflow, if we receive a packet composed entirely of VLAN headers. This patch adds a recursion counter to the GRO layer to prevent stack overflow. When a gro_receive function hits the recursion limit, GRO is aborted for this skb and it is processed normally. This recursion counter is put in the GRO CB, but could be turned into a percpu counter if we run out of space in the CB. Thanks to Vladimír Beneš <vbenes@redhat.com> for the initial bug report. Fixes: CVE-2016-7039 Fixes: 9b174d88c257 ("net: Add Transparent Ethernet Bridging GRO support.") Fixes: 66e5133f19e9 ("vlan: Add GRO support for non hardware accelerated vlan") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Jiri Benc <jbenc@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20gso: Support partial splitting at the frag_list pointerSteffen Klassert1-2/+4
Since commit 8a29111c7 ("net: gro: allow to build full sized skb") gro may build buffers with a frag_list. This can hurt forwarding because most NICs can't offload such packets, they need to be segmented in software. This patch splits buffers with a frag_list at the frag_list pointer into buffers that can be TSO offloaded. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-21gso: Remove arbitrary checks for unsupported GSOTom Herbert1-10/+0
In several gso_segment functions there are checks of gso_type against a seemingly arbitrary list of SKB_GSO_* flags. This seems like an attempt to identify unsupported GSO types, but since the stack is the one that set these GSO types in the first place this seems unnecessary to do. If a combination isn't valid in the first place that stack should not allow setting it. This is a code simplication especially for add new GSO types. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+5
In netdevice.h we removed the structure in net-next that is being changes in 'net'. In macsec.c and rtnetlink.c we have overlaps between fixes in 'net' and the u64 attribute changes in 'net-next'. The mlx5 conflicts have to do with vxlan support dependencies. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-07udp_offload: Set encapsulation before inner completes.Jarno Rajahalme1-3/+5
UDP tunnel segmentation code relies on the inner offsets being set for an UDP tunnel GSO packet, but the inner *_complete() functions will set the inner offsets only if 'encapsulation' is set before calling them. Currently, udp_gro_complete() sets 'encapsulation' only after the inner *_complete() functions are done. This causes the inner offsets having invalid values after udp_gro_complete() returns, which in turn will make it impossible to properly segment the packet in case it needs to be forwarded, which would be visible to the user either as invalid packets being sent or as packet loss. This patch fixes this by setting skb's 'encapsulation' in udp_gro_complete() before calling into the inner complete functions, and by making each possible UDP tunnel gro_complete() callback set the inner_mac_header to the beginning of the tunnel payload. Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Reviewed-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14GSO: Support partial segmentation offloadAlexander Duyck1-6/+21
This patch adds support for something I am referring to as GSO partial. The basic idea is that we can support a broader range of devices for segmentation if we use fixed outer headers and have the hardware only really deal with segmenting the inner header. The idea behind the naming is due to the fact that everything before csum_start will be fixed headers, and everything after will be the region that is handled by hardware. With the current implementation it allows us to add support for the following GSO types with an inner TSO_MANGLEID or TSO6 offload: NETIF_F_GSO_GRE NETIF_F_GSO_GRE_CSUM NETIF_F_GSO_IPIP NETIF_F_GSO_SIT NETIF_F_UDP_TUNNEL NETIF_F_UDP_TUNNEL_CSUM In the case of hardware that already supports tunneling we may be able to extend this further to support TSO_TCPV4 without TSO_MANGLEID if the hardware can support updating inner IPv4 headers. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07udp: Remove udp_offloadsTom Herbert1-63/+0
Now that the UDP encapsulation GRO functions have been moved to the UDP socket we not longer need the udp_offload insfrastructure so removing it. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07udp: Add GRO functions to UDP socketTom Herbert1-32/+20
This patch adds GRO functions (gro_receive and gro_complete) to UDP sockets. udp_gro_receive is changed to perform socket lookup on a packet. If a socket is found the related GRO functions are called. This features obsoletes using UDP offload infrastructure for GRO (udp_offload). This has the advantage of not being limited to provide offload on a per port basis, GRO is now applied to whatever individual UDP sockets are bound to. This also allows the possbility of "application defined GRO"-- that is we can attach something like a BPF program to a UDP socket to perfrom GRO on an application layer protocol. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-23net: Reset encap_level to avoid resetting features on inner IP headersAlexander Duyck1-0/+1
This patch corrects an oversight in which we were allowing the encap_level value to pass from the outer headers to the inner headers. As a result we were incorrectly identifying UDP or GRE tunnels as also making use of ipip or sit when the second header actually represented a tunnel encapsulated in either a UDP or GRE tunnel which already had the features masked. Fixes: 76443456227097179c1482 ("net: Move GSO csum into SKB_GSO_CB") Reported-by: Tom Herbert <tom@herbertland.com> Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-20tunnels: Don't apply GRO to multiple layers of encapsulation.Jesse Gross1-3/+3
When drivers express support for TSO of encapsulated packets, they only mean that they can do it for one layer of encapsulation. Supporting additional levels would mean updating, at a minimum, more IP length fields and they are unaware of this. No encapsulation device expresses support for handling offloaded encapsulated packets, so we won't generate these types of frames in the transmit path. However, GRO doesn't have a check for multiple levels of encapsulation and will attempt to build them. UDP tunnel GRO actually does prevent this situation but it only handles multiple UDP tunnels stacked on top of each other. This generalizes that solution to prevent any kind of tunnel stacking that would cause problems. Fixes: bf5a755f ("net-gre-gro: Add GRE support to the GRO stack") Signed-off-by: Jesse Gross <jesse@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14GSO/UDP: Use skb->len instead of udph->len to determine length of original skbAlexander Duyck1-5/+10
It is possible for tunnels to end up generating IP or IPv6 datagrams that are larger than 64K and expecting to be segmented. As such we need to deal with length values greater than 64K. In order to accommodate this we need to update the code to work with a 32b length value instead of a 16b one. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26GSO: Provide software checksum of tunneled UDP fragmentation offloadAlexander Duyck1-3/+12
On reviewing the code I realized that GRE and UDP tunnels could cause a kernel panic if we used GSO to segment a large UDP frame that was sent through the tunnel with an outer checksum and hardware offloads were not available. In order to correct this we need to update the feature flags that are passed to the skb_segment function so that in the event of UDP fragmentation being requested for the inner header the segmentation function will correctly generate the checksum for the payload if we cannot segment the outer header. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11udp: Use uh->len instead of skb->len to compute checksum in segmentationAlexander Duyck1-15/+13
The segmentation code was having to do a bunch of work to pull the skb->len and strip the udp header offset before the value could be used to adjust the checksum. Instead of doing all this work we can just use the value that goes into uh->len since that is the correct value with the correct byte order that we need anyway. By using this value we can save ourselves a bunch of pain as there is no need to do multiple byte swaps. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11udp: Clean up the use of flags in UDP segmentation offloadAlexander Duyck1-19/+18
This patch goes though and cleans up the logic related to several of the control flags used in UDP segmentation. Specifically the use of dont_encap isn't really needed as we can just check the skb for CHECKSUM_PARTIAL and if it isn't set then we don't need to update the internal headers. As such we can just drop that value. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: Update remote checksum segmentation to support use of GSO checksumAlexander Duyck1-12/+10
This patch addresses two main issues. First in the case of remote checksum offload we were avoiding dealing with scatter-gather issues. As a result it would be possible to assemble a series of frames that used frags instead of being linearized as they should have if remote checksum offload was enabled. Second I have updated the code so that we now let GSO take care of doing the checksum on the data itself and drop the special case that was added for remote checksum offload. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: Drop unecessary enc_features variable from tunnel segmentation functionsAlexander Duyck1-3/+3
The enc_features variable isn't necessary since features isn't used anywhere after we create enc_features so instead just use a destructive AND on features itself and save ourselves the variable declaration. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+7
Conflicts: drivers/net/bonding/bond_main.c drivers/net/ethernet/mellanox/mlxsw/spectrum.h drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c The bond_main.c and mellanox switch conflicts were cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11udp: restrict offloads to one namespaceHannes Frederic Sowa1-3/+7
udp tunnel offloads tend to aggregate datagrams based on inner headers. gro engine gets notified by tunnel implementations about possible offloads. The match is solely based on the port number. Imagine a tunnel bound to port 53, the offloading will look into all DNS packets and tries to aggregate them based on the inner data found within. This could lead to data corruption and malformed DNS packets. While this patch minimizes the problem and helps an administrator to find the issue by querying ip tunnel/fou, a better way would be to match on the specific destination ip address so if a user space socket is bound to the same address it will conflict. Cc: Tom Herbert <tom@herbertland.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16net: Eliminate NETIF_F_GEN_CSUM and NETIF_F_V[46]_CSUMTom Herbert1-2/+3
These netif flags are unnecessary convolutions. It is more straightforward to just use NETIF_F_HW_CSUM, NETIF_F_IP_CSUM, and NETIF_F_IPV6_CSUM directly. This patch also: - Cleans up can_checksum_protocol - Simplifies netdev_intersect_features Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-03ipv4: coding style: comparison for inequality with NULLIan Morris1-2/+2
The ipv4 code uses a mixture of coding styles. In some instances check for non-NULL pointer is done as x != NULL and sometimes as x. x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-12udp: Set SKB_GSO_UDP_TUNNEL* in UDP GRO pathTom Herbert1-1/+12
Properly set GSO types and skb->encapsulation in the UDP tunnel GRO complete so that packets are properly represented for GSO. This sets SKB_GSO_UDP_TUNNEL or SKB_GSO_UDP_TUNNEL_CSUM depending on whether non-zero checksums were received, and sets SKB_GSO_TUNNEL_REMCSUM if the remote checksum option was processed. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14udp: pass udp_offload struct to UDP gro callbacksTom Herbert1-2/+5
This patch introduces udp_offload_callbacks which has the same GRO functions (but not a GSO function) as offload_callbacks, except there is an argument to a udp_offload struct passed to gro_receive and gro_complete functions. This additional argument can be used to retrieve the per port structure of the encapsulation for use in gro processing (mostly by doing container_of on the structure). Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06net: Remove MPLS GSO feature.Pravin B Shelar1-2/+1
Device can export MPLS GSO support in dev->mpls_features same way it export vlan features in dev->vlan_features. So it is safe to remove NETIF_F_GSO_MPLS redundant flag. Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-06udp: Changes to udp_offload to support remote checksum offloadTom Herbert1-2/+16
Add a new GSO type, SKB_GSO_TUNNEL_REMCSUM, which indicates remote checksum offload being done (in this case inner checksum must not be offloaded to the NIC). Added logic in __skb_udp_tunnel_segment to handle remote checksum offload case. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06udp: Offload outer UDP tunnel csum if availableTom Herbert1-16/+36
In __skb_udp_tunnel_segment if outer UDP checksums are enabled and ip_summed is not already CHECKSUM_PARTIAL, set up checksum offload if device features allow it. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-20net: gso: use feature flag argument in all protocol gso handlersFlorian Westphal1-1/+1
skb_gso_segment() has a 'features' argument representing offload features available to the output path. A few handlers, e.g. GRE, instead re-fetch the features of skb->dev and use those instead of the provided ones when handing encapsulation/tunnels. Depending on dev->hw_enc_features of the output device skb_gso_segment() can then return NULL even when the caller has disabled all GSO feature bits, as segmentation of inner header thinks device will take care of segmentation. This e.g. affects the tbf scheduler, which will silently drop GRE-encap GSO skbs that did not fit the remaining token quota as the segmentation does not work when device supports corresponding hw offload capabilities. Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-04fou: eliminate IPv4,v6 specific GRO functionsTom Herbert1-0/+1
This patch removes fou[46]_gro_receive and fou[46]_gro_complete functions. The v4 or v6 variants were chosen for the UDP offloads based on the address family of the socket this is not necessary or correct. Alternatively, this patch adds is_ipv6 to napi_gro_skb. This is set in udp6_gro_receive and unset in udp4_gro_receive. In fou_gro_receive the value is used to select the correct inet_offloads for the protocol of the outer IP header. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>