summaryrefslogtreecommitdiff
path: root/net/ethtool
AgeCommit message (Collapse)AuthorFilesLines
9 daysethtool: Avoid overflowing userspace buffer on stats queryGal Pressman1-6/+24
[ Upstream commit 7b07be1ff1cb6c49869910518650e8d0abc7d25f ] The ethtool -S command operates across three ioctl calls: ETHTOOL_GSSET_INFO for the size, ETHTOOL_GSTRINGS for the names, and ETHTOOL_GSTATS for the values. If the number of stats changes between these calls (e.g., due to device reconfiguration), userspace's buffer allocation will be incorrect, potentially leading to buffer overflow. Drivers are generally expected to maintain stable stat counts, but some drivers (e.g., mlx5, bnx2x, bna, ksz884x) use dynamic counters, making this scenario possible. Some drivers try to handle this internally: - bnad_get_ethtool_stats() returns early in case stats.n_stats is not equal to the driver's stats count. - micrel/ksz884x also makes sure not to write anything beyond stats.n_stats and overflow the buffer. However, both use stats.n_stats which is already assigned with the value returned from get_sset_count(), hence won't solve the issue described here. Change ethtool_get_strings(), ethtool_get_stats(), ethtool_get_phy_stats() to not return anything in case of a mismatch between userspace's size and get_sset_size(), to prevent buffer overflow. The returned n_stats value will be equal to zero, to reflect that nothing has been returned. This could result in one of two cases when using upstream ethtool, depending on when the size change is detected: 1. When detected in ethtool_get_strings(): # ethtool -S eth2 no stats available 2. When detected in get stats, all stats will be reported as zero. Both cases are presumably transient, and a subsequent ethtool call should succeed. Other than the overflow avoidance, these two cases are very evident (no output/cleared stats), which is arguably better than presenting incorrect/shifted stats. I also considered returning an error instead of a "silent" response, but that seems more destructive towards userspace apps. Notes: - This patch does not claim to fix the inherent race, it only makes sure that we do not overflow the userspace buffer, and makes for a more predictable behavior. - RTNL lock is held during each ioctl, the race window exists between the separate ioctl calls when the lock is released. - Userspace ethtool always fills stats.n_stats, but it is likely that these stats ioctls are implemented in other userspace applications which might not fill it. The added code checks that it's not zero, to prevent any regressions. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20251208121901.3203692-1-gal@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-25net: ethtool: Don't call .cleanup_data when prepare_data failsMaxime Chevallier1-3/+5
[ Upstream commit 4f038a6a02d20859a3479293cbf172b0f14cbdd6 ] There's a consistent pattern where the .cleanup_data() callback is called when .prepare_data() fails, when it should really be called to clean after a successful .prepare_data() as per the documentation. Rewrite the error-handling paths to make sure we don't cleanup un-prepared data. Fixes: c781ff12a2f3 ("ethtool: Allow network drivers to dump arbitrary EEPROM data") Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250407130511.75621-1-maxime.chevallier@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08net: avoid race between device unregistration and ethnl opsAntoine Tenart1-1/+1
[ Upstream commit 12e070eb6964b341b41677fd260af5a305316a1f ] The following trace can be seen if a device is being unregistered while its number of channels are being modified. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 3754 at kernel/locking/mutex.c:564 __mutex_lock+0xc8a/0x1120 CPU: 3 UID: 0 PID: 3754 Comm: ethtool Not tainted 6.13.0-rc6+ #771 RIP: 0010:__mutex_lock+0xc8a/0x1120 Call Trace: <TASK> ethtool_check_max_channel+0x1ea/0x880 ethnl_set_channels+0x3c3/0xb10 ethnl_default_set_doit+0x306/0x650 genl_family_rcv_msg_doit+0x1e3/0x2c0 genl_rcv_msg+0x432/0x6f0 netlink_rcv_skb+0x13d/0x3b0 genl_rcv+0x28/0x40 netlink_unicast+0x42e/0x720 netlink_sendmsg+0x765/0xc20 __sys_sendto+0x3ac/0x420 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e This is because unregister_netdevice_many_notify might run before the rtnl lock section of ethnl operations, eg. set_channels in the above example. In this example the rss lock would be destroyed by the device unregistration path before being used again, but in general running ethnl operations while dismantle has started is not a good idea. Fix this by denying any operation on devices being unregistered. A check was already there in ethnl_ops_begin, but not wide enough. Note that the same issue cannot be seen on the ioctl version (__dev_ethtool) because the device reference is retrieved from within the rtnl lock section there. Once dismantle started, the net device is unlisted and no reference will be found. Fixes: dde91ccfa25f ("ethtool: do not perform operations on net devices being unregistered") Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/20250116092159.50890-1-atenart@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14ethtool: Fix wrong mod state in case of verbose and no_mask bitsetKory Maincent1-4/+44
[ Upstream commit 910c4788d6155b2202ec88273376cd7ecdc24f0a ] A bitset without mask in a _SET request means we want exactly the bits in the bitset to be set. This works correctly for compact format but when verbose format is parsed, ethnl_update_bitset32_verbose() only sets the bits present in the request bitset but does not clear the rest. The commit 6699170376ab ("ethtool: fix application of verbose no_mask bitset") fixes this issue by clearing the whole target bitmap before we start iterating. The solution proposed brought an issue with the behavior of the mod variable. As the bitset is always cleared the old value will always differ to the new value. Fix it by adding a new function to compare bitmaps and a temporary variable which save the state of the old bitmap. Fixes: 6699170376ab ("ethtool: fix application of verbose no_mask bitset") Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20241202153358.1142095-1-kory.maincent@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04ethtool: check device is present when getting link settingsJamie Bainbridge1-0/+3
[ Upstream commit a699781c79ecf6cfe67fb00a0331b4088c7c8466 ] A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd7fb65 ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17e2d01 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd7fb65 ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-18ethtool: netlink: do not return SQI value if link is downOleksij Rempel1-13/+28
[ Upstream commit c184cf94e73b04ff7048d045f5413899bc664788 ] Do not attach SQI value if link is down. "SQI values are only valid if link-up condition is present" per OpenAlliance specification of 100Base-T1 Interoperability Test suite [1]. The same rule would apply for other link types. [1] https://opensig.org/automotive-ethernet-specifications/# Fixes: 806602191592 ("ethtool: provide UAPI for PHY Signal Quality Index (SQI)") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Woojung Huh <woojung.huh@microchip.com> Link: https://patch.msgid.link/20240709061943.729381-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-21net: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool()Su Hui1-1/+1
[ Upstream commit 0dcc53abf58d572d34c5313de85f607cd33fc691 ] Clang static checker (scan-build) warning: net/ethtool/ioctl.c:line 2233, column 2 Called function pointer is null (null dereference). Return '-EOPNOTSUPP' when 'ops->get_ethtool_phy_stats' is NULL to fix this typo error. Fixes: 201ed315f967 ("net/ethtool/ioctl: split ethtool_get_phy_stats into multiple helpers") Signed-off-by: Su Hui <suhui@nfschina.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Link: https://lore.kernel.org/r/20240605034742.921751-1-suhui@nfschina.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26ethtool: netlink: Add missing ethnl_ops_begin/completeLudvig Pärsson1-2/+7
[ Upstream commit f1172f3ee3a98754d95b968968920a7d03fdebcc ] Accessing an ethernet device that is powered off or clock gated might cause the CPU to hang. Add ethnl_ops_begin/complete in ethnl_set_features() to protect against this. Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Ludvig Pärsson <ludvig.parsson@axis.com> Link: https://lore.kernel.org/r/20240117-etht2-v2-1-1a96b6e8c650@axis.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-08ethtool: don't propagate EOPNOTSUPP from dumpsJakub Kicinski1-0/+1
[ Upstream commit cbeb989e41f4094f54bec2cecce993f26f547bea ] The default dump handler needs to clear ret before returning. Otherwise if the last interface returns an inconsequential error this error will propagate to user space. This may confuse user space (ethtool CLI seems to ignore it, but YNL doesn't). It will also terminate the dump early for mutli-skb dump, because netlink core treats EOPNOTSUPP as a real error. Fixes: 728480f12442 ("ethtool: default handlers for GET requests") Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231126225806.2143528-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-19Revert "ethtool: Fix mod state of verbose no_mask bitset"Kory Maincent1-26/+6
This reverts commit 108a36d07c01edbc5942d27c92494d1c6e4d45a0. It was reported that this fix breaks the possibility to remove existing WoL flags. For example: ~$ ethtool lan2 ... Supports Wake-on: pg Wake-on: d ... ~$ ethtool -s lan2 wol gp ~$ ethtool lan2 ... Wake-on: pg ... ~$ ethtool -s lan2 wol d ~$ ethtool lan2 ... Wake-on: pg ... This worked correctly before this commit because we were always updating a zero bitmap (since commit 6699170376ab ("ethtool: fix application of verbose no_mask bitset"), that is) so that the rest was left zero naturally. But now the 1->0 change (old_val is true, bit not present in netlink nest) no longer works. Reported-by: Oleksij Rempel <o.rempel@pengutronix.de> Reported-by: Michal Kubecek <mkubecek@suse.cz> Closes: https://lore.kernel.org/netdev/20231019095140.l6fffnszraeb6iiw@lion.mk-sys.cz/ Cc: stable@vger.kernel.org Fixes: 108a36d07c01 ("ethtool: Fix mod state of verbose no_mask bitset") Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/r/20231019-feature_ptp_bitset_fix-v1-1-70f3c429a221@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-11ethtool: Fix mod state of verbose no_mask bitsetKory Maincent1-6/+26
A bitset without mask in a _SET request means we want exactly the bits in the bitset to be set. This works correctly for compact format but when verbose format is parsed, ethnl_update_bitset32_verbose() only sets the bits present in the request bitset but does not clear the rest. The commit 6699170376ab fixes this issue by clearing the whole target bitmap before we start iterating. The solution proposed brought an issue with the behavior of the mod variable. As the bitset is always cleared the old val will always differ to the new val. Fix it by adding a new temporary variable which save the state of the old bitmap. Fixes: 6699170376ab ("ethtool: fix application of verbose no_mask bitset") Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231009133645.44503-1-kory.maincent@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-03ethtool: plca: fix plca enable data type while parsing the valueParthiban Veerasooran1-16/+29
The ETHTOOL_A_PLCA_ENABLED data type is u8. But while parsing the value from the attribute, nla_get_u32() is used in the plca_update_sint() function instead of nla_get_u8(). So plca_cfg.enabled variable is updated with some garbage value instead of 0 or 1 and always enables plca even though plca is disabled through ethtool application. This bug has been fixed by parsing the values based on the attributes type in the policy. Fixes: 8580e16c28f3 ("net/ethtool: add netlink interface for the PLCA RS") Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230908044548.5878-1-Parthiban.Veerasooran@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-16ethtool: netlink: always pass genl_info to .prepare_dataJakub Kicinski25-47/+47
We had a number of bugs in the past because developers forgot to fully test dumps, which pass NULL as info to .prepare_data. .prepare_data implementations would try to access info->extack leading to a null-deref. Now that dumps and notifications can access struct genl_info we can pass it in, and remove the info null checks. Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # pause Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230814214723.2924989-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-16ethtool: netlink: simplify arguments to ethnl_default_parse()Jakub Kicinski1-12/+9
Pass struct genl_info directly instead of its members. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230814214723.2924989-10-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-16genetlink: use attrs from struct genl_infoJakub Kicinski2-2/+3
Since dumps carry struct genl_info now, use the attrs pointer from genl_info and remove the one in struct genl_dumpit_info. Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230814214723.2924989-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-03net: transfer rtnl_lock() requirement from ethtool_set_ethtool_phy_ops() to ↵Vladimir Oltean1-2/+1
caller phy_init() and phy_exit() will have to do more stuff under rtnl_lock() in a future change. Since rtnl_unlock() -> netdev_run_todo() does a lot of stuff under the hood, it's a pity to lock and unlock the rtnetlink mutex twice in a row. Change the calling convention such that the only caller of ethtool_set_ethtool_phy_ops(), phy_device.c, provides a context where the rtnl_mutex is already acquired. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230801142824.1772134-11-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-31net: flow_dissector: Use 64bits for used_keysRatheesh Kannoth1-8/+8
As 32bits of dissector->used_keys are exhausted, increase the size to 64bits. This is base change for ESP/AH flow dissector patch. Please find patch and discussions at https://lore.kernel.org/netdev/ZMDNjD46BvZ5zp5I@corigine.com/T/#t Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Tested-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-28net: convert some netlink netdev iterators to depend on the xarrayJakub Kicinski2-93/+43
Reap the benefits of easier iteration thanks to the xarray. Convert just the genetlink ones, those are easier to test. Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230726185530.2247698-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-28net: ethtool: Unify ETHTOOL_{G,S}RXFH rxnfc copyJoe Damato1-37/+38
ETHTOOL_GRXFH correctly copies in the full struct ethtool_rxnfc when FLOW_RSS is set; ETHTOOL_SRXFH needs a similar code path to handle the FLOW_RSS case so that ethtool can set the flow hash for custom RSS contexts (if supported by the driver). The copy code from ETHTOOL_GRXFH has been pulled out in to a helper so that it can be called in both ETHTOOL_{G,S}RXFH code paths. Acked-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Joe Damato <jdamato@fastly.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-15net: create device lookup API with reference trackingJakub Kicinski1-5/+5
New users of dev_get_by_index() and dev_get_by_name() keep getting added and it would be nice to steer them towards the APIs with reference tracking. Add variants of those calls which allocate the reference tracker and use them in a couple of places. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-14ethtool: ioctl: account for sopass diff in set_wolJustin Chen1-1/+2
sopass won't be set if wolopt doesn't change. This means the following will fail to set the correct sopass. ethtool -s eth0 wol s sopass 11:22:33:44:55:66 ethtool -s eth0 wol s sopass 22:44:55:66:77:88 Make sure we call into the driver layer set_wol if sopass is different. Fixes: 55b24334c0f2 ("ethtool: ioctl: improve error checking for set_wol") Signed-off-by: Justin Chen <justin.chen@broadcom.com> Link: https://lore.kernel.org/r/1686605822-34544-1-git-send-email-justin.chen@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12net: ethtool: don't require empty header nestsJakub Kicinski1-0/+2
Ethtool currently requires a header nest (which is used to carry the common family options) in all requests including dumps. $ cli.py --spec netlink/specs/ethtool.yaml --dump channels-get lib.ynl.NlError: Netlink error: Invalid argument nl_len = 64 (48) nl_flags = 0x300 nl_type = 2 error: -22 extack: {'msg': 'request header missing'} $ cli.py --spec netlink/specs/ethtool.yaml --dump channels-get \ --json '{"header":{}}'; ) [{'combined-count': 1, 'combined-max': 1, 'header': {'dev-index': 2, 'dev-name': 'enp1s0'}}] Requiring the header nest to always be there may seem nice from the consistency perspective, but it's not serving any practical purpose. We shouldn't burden the user like this. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-09ethtool: ioctl: improve error checking for set_wolJustin Chen1-2/+12
The netlink version of set_wol checks for not supported wolopts and avoids setting wol when the correct wolopt is already set. If we do the same with the ioctl version then we can remove these checks from the driver layer. Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Justin Chen <justin.chen@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/1686179653-29750-1-git-send-email-justin.chen@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-03ethtool: Fix uninitialized number of lanesIdo Schimmel1-1/+1
It is not possible to set the number of lanes when setting link modes using the legacy IOCTL ethtool interface. Since 'struct ethtool_link_ksettings' is not initialized in this path, drivers receive an uninitialized number of lanes in 'struct ethtool_link_ksettings::lanes'. When this information is later queried from drivers, it results in the ethtool code making decisions based on uninitialized memory, leading to the following KMSAN splat [1]. In practice, this most likely only happens with the tun driver that simply returns whatever it got in the set operation. As far as I can tell, this uninitialized memory is not leaked to user space thanks to the 'ethtool_ops->cap_link_lanes_supported' check in linkmodes_prepare_data(). Fix by initializing the structure in the IOCTL path. Did not find any more call sites that pass an uninitialized structure when calling 'ethtool_ops::set_link_ksettings()'. [1] BUG: KMSAN: uninit-value in ethnl_update_linkmodes net/ethtool/linkmodes.c:273 [inline] BUG: KMSAN: uninit-value in ethnl_set_linkmodes+0x190b/0x19d0 net/ethtool/linkmodes.c:333 ethnl_update_linkmodes net/ethtool/linkmodes.c:273 [inline] ethnl_set_linkmodes+0x190b/0x19d0 net/ethtool/linkmodes.c:333 ethnl_default_set_doit+0x88d/0xde0 net/ethtool/netlink.c:640 genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline] genl_rcv_msg+0x141a/0x14c0 net/netlink/genetlink.c:1065 netlink_rcv_skb+0x3f8/0x750 net/netlink/af_netlink.c:2577 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0xf41/0x1270 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x127d/0x1430 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmsg net/socket.c:2584 [inline] __do_sys_sendmsg net/socket.c:2593 [inline] __se_sys_sendmsg net/socket.c:2591 [inline] __x64_sys_sendmsg+0x36b/0x540 net/socket.c:2591 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was stored to memory at: tun_get_link_ksettings+0x37/0x60 drivers/net/tun.c:3544 __ethtool_get_link_ksettings+0x17b/0x260 net/ethtool/ioctl.c:441 ethnl_set_linkmodes+0xee/0x19d0 net/ethtool/linkmodes.c:327 ethnl_default_set_doit+0x88d/0xde0 net/ethtool/netlink.c:640 genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline] genl_rcv_msg+0x141a/0x14c0 net/netlink/genetlink.c:1065 netlink_rcv_skb+0x3f8/0x750 net/netlink/af_netlink.c:2577 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0xf41/0x1270 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x127d/0x1430 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmsg net/socket.c:2584 [inline] __do_sys_sendmsg net/socket.c:2593 [inline] __se_sys_sendmsg net/socket.c:2591 [inline] __x64_sys_sendmsg+0x36b/0x540 net/socket.c:2591 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was stored to memory at: tun_set_link_ksettings+0x37/0x60 drivers/net/tun.c:3553 ethtool_set_link_ksettings+0x600/0x690 net/ethtool/ioctl.c:609 __dev_ethtool net/ethtool/ioctl.c:3024 [inline] dev_ethtool+0x1db9/0x2a70 net/ethtool/ioctl.c:3078 dev_ioctl+0xb07/0x1270 net/core/dev_ioctl.c:524 sock_do_ioctl+0x295/0x540 net/socket.c:1213 sock_ioctl+0x729/0xd90 net/socket.c:1316 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl+0x222/0x400 fs/ioctl.c:856 __x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Local variable link_ksettings created at: ethtool_set_link_ksettings+0x54/0x690 net/ethtool/ioctl.c:577 __dev_ethtool net/ethtool/ioctl.c:3024 [inline] dev_ethtool+0x1db9/0x2a70 net/ethtool/ioctl.c:3078 Fixes: 012ce4dd3102 ("ethtool: Extend link modes settings uAPI with lanes") Reported-and-tested-by: syzbot+ef6edd9f1baaa54d6235@syzkaller.appspotmail.com Link: https://lore.kernel.org/netdev/0000000000004bb41105fa70f361@google.com/ Reviewed-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-25net: ethtool: coalesce: try to make user settings stick twiceJakub Kicinski1-11/+43
SET_COALESCE may change operation mode and parameters in one call. Changing operation mode may cause the driver to reset the parameter values to what is a reasonable default for new operation mode. Since driver does not know which parameters come from user and which are echoed back from ->get, driver may ignore the parameters when switching operation modes. This used to be inevitable for ioctl() but in netlink we know which parameters are actually specified by the user. We could inform which parameters were set by the user but this would lead to a lot of code duplication in the drivers. Instead try to call the drivers twice if both mode and params are changed. The set method already checks if any params need updating so in case the driver did the right thing the first time around - there will be no second call to it's ->set method (only an extra call to ->get()). For mlx5 for example before this patch we'd see: # ethtool -C eth0 adaptive-rx on adaptive-tx on # ethtool -C eth0 adaptive-rx off adaptive-tx off \ tx-usecs 123 rx-usecs 123 Adaptive RX: off TX: off rx-usecs: 3 rx-frames: 32 tx-usecs: 16 tx-frames: 32 [...] After the change: # ethtool -C eth0 adaptive-rx on adaptive-tx on # ethtool -C eth0 adaptive-rx off adaptive-tx off \ tx-usecs 123 rx-usecs 123 Adaptive RX: off TX: off rx-usecs: 123 rx-frames: 32 tx-usecs: 123 tx-frames: 32 [...] This only works for netlink, so it's a small discrepancy between netlink and ioctl(). Since we anticipate most users to move to netlink I believe it's worth making their lives easier. Link: https://lore.kernel.org/r/20230420233302.944382-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-21net: ethtool: mm: sanitize some UAPI configurationsVladimir Oltean1-0/+10
The verify-enabled boolean (ETHTOOL_A_MM_VERIFY_ENABLED) was intended to be a sub-setting of tx-enabled (ETHTOOL_A_MM_TX_ENABLED). IOW, MAC Merge TX can be enabled with or without verification, but verification with TX disabled makes no sense. The pmac-enabled boolean (ETHTOOL_A_MM_PMAC_ENABLED) was intended to be a global toggle from an API perspective, whereas tx-enabled just handles the TX direction. IOW, the pMAC can be enabled with or without TX, but it doesn't make sense to enable TX if the pMAC is not enabled. Add two checks which sanitize and reject these invalid cases. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-14net: ethtool: create and export ethtool_dev_mm_supported()Vladimir Oltean1-0/+23
Create a wrapper over __ethtool_dev_mm_supported() which also calls ethnl_ops_begin() and ethnl_ops_complete(). It can be used by other code layers, such as tc, to make sure that preemptible TCs are supported (this is true if an underlying MAC Merge layer exists). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-3/+4
Conflicts: drivers/net/ethernet/google/gve/gve.h 3ce934558097 ("gve: Secure enough bytes in the first TX desc for all TCP pkts") 75eaae158b1b ("gve: Add XDP DROP and TX support for GQI-QPL format") https://lore.kernel.org/all/20230406104927.45d176f5@canb.auug.org.au/ https://lore.kernel.org/all/c5872985-1a95-0bc8-9dcc-b6f23b439e9d@tessares.net/ Adjacent changes: net/can/isotp.c 051737439eae ("can: isotp: fix race between isotp_sendsmg() and isotp_release()") 96d1c81e6a04 ("can: isotp: add module parameter for maximum pdu size") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-05ethtool: reset #lanes when lanes is omittedAndy Roulin1-3/+4
If the number of lanes was forced and then subsequently the user omits this parameter, the ksettings->lanes is reset. The driver should then reset the number of lanes to the device's default for the specified speed. However, although the ksettings->lanes is set to 0, the mod variable is not set to true to indicate the driver and userspace should be notified of the changes. The consequence is that the same ethtool operation will produce different results based on the initial state. If the initial state is: $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 2 Duplex: Full Auto-negotiation: on then executing 'ethtool -s swp1 speed 50000 autoneg off' will yield: $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 2 Duplex: Full Auto-negotiation: off While if the initial state is: $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 1 Duplex: Full Auto-negotiation: off executing the same 'ethtool -s swp1 speed 50000 autoneg off' results in: $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 1 Duplex: Full Auto-negotiation: off This patch fixes this behavior. Omitting lanes will always results in the driver choosing the default lane width for the chosen speed. In this scenario, regardless of the initial state, the end state will be, e.g., $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 2 Duplex: Full Auto-negotiation: off Fixes: 012ce4dd3102 ("ethtool: Extend link modes settings uAPI with lanes") Signed-off-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/ac238d6b-8726-8156-3810-6471291dbc7f@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29ipv6: Remove in6addr_any alternatives.Kuniyuki Iwashima1-5/+5
Some code defines the IPv6 wildcard address as a local variable and use it with memcmp() or ipv6_addr_equal(). Let's use in6addr_any and ipv6_addr_any() instead. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-28ethtool: Add support for configuring tx_push_buf_lenShay Agroskin2-3/+33
This attribute, which is part of ethtool's ring param configuration allows the user to specify the maximum number of the packet's payload that can be written directly to the device. Example usage: # ethtool -G [interface] tx-push-buf-len [number of bytes] Co-developed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-21net: ethtool: fix __ethtool_dev_mm_supported() implementationVladimir Oltean1-1/+1
The MAC Merge layer is supported when ops->get_mm() returns 0. The implementation was changed during review, and in this process, a bug was introduced. Link: https://lore.kernel.org/netdev/20230111161706.1465242-5-vladimir.oltean@nxp.com/ Fixes: 04692c9020b7 ("net: ethtool: netlink: retrieve stats from multiple sources (eMAC, pMAC)") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Link: https://lore.kernel.org/all/20230220122343.1156614-2-vladimir.oltean@nxp.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-21ethtool: pse-pd: Fix double word in commentsBo Liu1-1/+1
Remove the repeated word "for" in comments. Signed-off-by: Bo Liu <liubo03@inspur.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20230221083036.2414-1-liubo03@inspur.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-13net: ethtool: extend ringparam set/get APIs for rx_pushShannon Nelson2-3/+16
Similar to what was done for TX_PUSH, add an RX_PUSH concept to the ethtool interfaces. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-07ethtool: mm: fix get_mm() return code not propagating to user spaceVladimir Oltean1-1/+1
If ops->get_mm() returns a non-zero error code, we goto out_complete, but there, we return 0. Fix that to propagate the "ret" variable to the caller. If ops->get_mm() succeeds, it will always return 0. Fixes: 2b30f8291a30 ("net: ethtool: add support for MAC Merge layer") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230206094932.446379-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-27ethtool: netlink: convert commands to common SETJakub Kicinski16-725/+508
Convert all SET commands where new common code is applicable. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-27ethtool: netlink: handle SET intro/outro in the common codeJakub Kicinski3-50/+100
Most ethtool SET callbacks follow the same general structure. ethnl_parse_header_dev_get() rtnl_lock() ethnl_ops_begin() ... do stuff ... ethtool_notify() ethnl_ops_complete() rtnl_unlock() ethnl_parse_header_dev_put() This leads to a lot of copy / pasted code an bugs when people mis-handle the error path. Add a generic implementation of this pattern with a .set callback in struct ethnl_request_ops called to "do stuff". Also add an optional .set_validate which is called before ethnl_ops_begin() -- a lot of implementations do basic request capability / sanity checking at that point. Because we want to avoid generating the notification when no change happened - adopt a slightly hairy return values: - 0 means nothing to do (no notification) - 1 means done / continue - negative error codes on error Reuse .hdr_attr from struct ethnl_request_ops, GET and SET use the same attr spaces in all cases. Convert pause as an example (and to avoid unused function warnings). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net: ethtool: fix NULL pointer dereference in pause_prepare_data()Vladimir Oltean1-1/+1
In the following call path: ethnl_default_dumpit -> ethnl_default_dump_one -> ctx->ops->prepare_data -> pause_prepare_data struct genl_info *info will be passed as NULL, and pause_prepare_data() dereferences it while getting the extended ack pointer. To avoid that, just set the extack to NULL if "info" is NULL, since the netlink extack handling messages know how to deal with that. The pattern "info ? info->extack : NULL" is present in quite a few other "prepare_data" implementations, so it's clear that it's a more general problem to be dealt with at a higher level, but the code should have at least adhered to the current conventions to avoid the NULL dereference. Fixes: 04692c9020b7 ("net: ethtool: netlink: retrieve stats from multiple sources (eMAC, pMAC)") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reported-by: syzbot+9d44aae2720fc40b8474@syzkaller.appspotmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net: ethtool: fix NULL pointer dereference in stats_prepare_data()Vladimir Oltean1-1/+1
In the following call path: ethnl_default_dumpit -> ethnl_default_dump_one -> ctx->ops->prepare_data -> stats_prepare_data struct genl_info *info will be passed as NULL, and stats_prepare_data() dereferences it while getting the extended ack pointer. To avoid that, just set the extack to NULL if "info" is NULL, since the netlink extack handling messages know how to deal with that. The pattern "info ? info->extack : NULL" is present in quite a few other "prepare_data" implementations, so it's clear that it's a more general problem to be dealt with at a higher level, but the code should have at least adhered to the current conventions to avoid the NULL dereference. Fixes: 04692c9020b7 ("net: ethtool: netlink: retrieve stats from multiple sources (eMAC, pMAC)") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-23ethtool: Add and use ethnl_update_bool.David S. Miller2-1/+27
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-23net: ethtool: add helpers for aggregate statisticsVladimir Oltean1-0/+127
When a pMAC exists but the driver is unable to atomically query the aggregate eMAC+pMAC statistics, the user should be given back at least the sum of eMAC and pMAC counters queried separately. This is a generic problem, so add helpers in ethtool to do this operation, if the driver doesn't have a better way to report aggregate stats. Do this in a way that does not require changes to these functions when new stats are added (basically treat the structures as an array of u64 values, except for the first element which is the stats source). In include/linux/ethtool.h, there is already a section where helper function prototypes should be placed. The trouble is, this section is too early, before the definitions of struct ethtool_eth_mac_stats et.al. Move that section at the end and append these new helpers to it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-23net: ethtool: netlink: retrieve stats from multiple sources (eMAC, pMAC)Vladimir Oltean5-3/+99
IEEE 802.3-2018 clause 99 defines a MAC Merge sublayer which contains an Express MAC and a Preemptible MAC. Both MACs are hidden to higher and lower layers and visible as a single MAC (packet classification to eMAC or pMAC on TX is done based on priority; classification on RX is done based on SFD). For devices which support a MAC Merge sublayer, it is desirable to retrieve individual packet counters from the eMAC and the pMAC, as well as aggregate statistics (their sum). Introduce a new ETHTOOL_A_STATS_SRC attribute which is part of the policy of ETHTOOL_MSG_STATS_GET and, and an ETHTOOL_A_PAUSE_STATS_SRC which is part of the policy of ETHTOOL_MSG_PAUSE_GET (accepted when ETHTOOL_FLAG_STATS is set in the common ethtool header). Both of these take values from enum ethtool_mac_stats_src, defaulting to "aggregate" in the absence of the attribute. Existing drivers do not need to pay attention to this enum which was added to all driver-facing structures, just the ones which report the MAC merge layer as supported. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-23net: ethtool: add support for MAC Merge layerVladimir Oltean4-2/+280
The MAC merge sublayer (IEEE 802.3-2018 clause 99) is one of 2 specifications (the other being Frame Preemption; IEEE 802.1Q-2018 clause 6.7.2), which work together to minimize latency caused by frame interference at TX. The overall goal of TSN is for normal traffic and traffic with a bounded deadline to be able to cohabitate on the same L2 network and not bother each other too much. The standards achieve this (partly) by introducing the concept of preemptible traffic, i.e. Ethernet frames that have a custom value for the Start-of-Frame-Delimiter (SFD), and these frames can be fragmented and reassembled at L2 on a link-local basis. The non-preemptible frames are called express traffic, they are transmitted using a normal SFD, and they can preempt preemptible frames, therefore having lower latency, which can matter at lower (100 Mbps) link speeds, or at high MTUs (jumbo frames around 9K). Preemption is not recursive, i.e. a P frame cannot preempt another P frame. Preemption also does not depend upon priority, or otherwise said, an E frame with prio 0 will still preempt a P frame with prio 7. In terms of implementation, the standards talk about the presence of an express MAC (eMAC) which handles express traffic, and a preemptible MAC (pMAC) which handles preemptible traffic, and these MACs are multiplexed on the same MII by a MAC merge layer. To support frame preemption, the definition of the SFD was generalized to SMD (Start-of-mPacket-Delimiter), where an mPacket is essentially an Ethernet frame fragment, or a complete frame. Stations unaware of an SMD value different from the standard SFD will treat P frames as error frames. To prevent that from happening, a negotiation process is defined. On RX, packets are dispatched to the eMAC or pMAC after being filtered by their SMD. On TX, the eMAC/pMAC classification decision is taken by the 802.1Q spec, based on packet priority (each of the 8 user priority values may have an admin-status of preemptible or express). The MAC Merge layer and the Frame Preemption parameters have some degree of independence in terms of how software stacks are supposed to deal with them. The activation of the MM layer is supposed to be controlled by an LLDP daemon (after it has been communicated that the link partner also supports it), after which a (hardware-based or not) verification handshake takes place, before actually enabling the feature. So the process is intended to be relatively plug-and-play. Whereas FP settings are supposed to be coordinated across a network using something approximating NETCONF. The support contained here is exclusively for the 802.3 (MAC Merge) portions and not for the 802.1Q (Frame Preemption) parts. This API is sufficient for an LLDP daemon to do its job. The FP adminStatus variable from 802.1Q is outside the scope of an LLDP daemon. I have taken a few creative licenses and augmented the Linux kernel UAPI compared to the standard managed objects recommended by IEEE 802.3. These are: - ETHTOOL_A_MM_PMAC_ENABLED: According to Figure 99-6: Receive Processing state diagram, a MAC Merge layer is always supposed to be able to receive P frames. However, this implies keeping the pMAC powered on, which will consume needless power in applications where FP will never be used. If LLDP is used, the reception of an Additional Ethernet Capabilities TLV from the link partner is sufficient indication that the pMAC should be enabled. So my proposal is that in Linux, we keep the pMAC turned off by default and that user space turns it on when needed. - ETHTOOL_A_MM_VERIFY_ENABLED: The IEEE managed object is called aMACMergeVerifyDisableTx. I opted for consistency (positive logic) in the boolean netlink attributes offered, so this is also positive here. Other than the meaning being reversed, they correspond to the same thing. - ETHTOOL_A_MM_MAX_VERIFY_TIME: I found it most reasonable for a LLDP daemon to maximize the verifyTime variable (delay between SMD-V transmissions), to maximize its chances that the LP replies. IEEE says that the verifyTime can range between 1 and 128 ms, but the NXP ENETC stupidly keeps this variable in a 7 bit register, so the maximum supported value is 127 ms. I could have chosen to hardcode this in the LLDP daemon to a lower value, but why not let the kernel expose its supported range directly. - ETHTOOL_A_MM_TX_MIN_FRAG_SIZE: the standard managed object is called aMACMergeAddFragSize, and expresses the "additional" fragment size (on top of ETH_ZLEN), whereas this expresses the absolute value of the fragment size. - ETHTOOL_A_MM_RX_MIN_FRAG_SIZE: there doesn't appear to exist a managed object mandated by the standard, but user space clearly needs to know what is the minimum supported fragment size of our local receiver, since LLDP must advertise a value no lower than that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-4/+7
drivers/net/ipa/ipa_interrupt.c drivers/net/ipa/ipa_interrupt.h 9ec9b2a30853 ("net: ipa: disable ipa interrupt during suspend") 8e461e1f092b ("net: ipa: introduce ipa_interrupt_enable()") d50ed3558719 ("net: ipa: enable IPA interrupt handlers separate from registration") https://lore.kernel.org/all/20230119114125.5182c7ab@canb.auug.org.au/ https://lore.kernel.org/all/79e46152-8043-a512-79d9-c3b905462774@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-14plca.c: fix obvious mistake in checking retvalPiergiorgio Beruto1-5/+5
Revert a wrong fix that was done during the review process. The intention was to substitute "if(ret < 0)" with "if(ret)". Unfortunately, the intended fix did not meet the code. Besides, after additional review, it was decided that "if(ret < 0)" was actually the right thing to do. Fixes: 8580e16c28f3 ("net/ethtool: add netlink interface for the PLCA RS") Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/f2277af8951a51cfee2fb905af8d7a812b7beaf4.1673616357.git.piergiorgio.beruto@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13ethtool: add tx aggregation parametersDaniele Palmas1-2/+20
Add the following ethtool tx aggregation parameters: ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES Maximum size in bytes of a tx aggregated block of frames. ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES Maximum number of frames that can be aggregated into a block. ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS Time in usecs after the first packet arrival in an aggregated block for the block to be sent. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-13ethtool: add netlink attr in rss get reply only if value is not nullSudheer Mogilappagari1-4/+7
Current code for RSS_GET ethtool command includes netlink attributes in reply message to user space even if they are null. Added checks to include netlink attribute in reply message only if a value is received from driver. Drivers might return null for RSS indirection table or hash key. Instead of including attributes with empty value in the reply message, add netlink attribute only if there is content. Fixes: 7112a04664bf ("ethtool: add netlink based get rss support") Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/r/20230111235607.85509-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11drivers/net/phy: add the link modes for the 10BASE-T1S Ethernet PHYPiergiorgio Beruto1-0/+8
This patch adds the link modes for the IEEE 802.3cg Clause 147 10BASE-T1S Ethernet PHY. According to the specifications, the 10BASE-T1S supports Point-To-Point Full-Duplex, Point-To-Point Half-Duplex and/or Point-To-Multipoint (AKA Multi-Drop) Half-Duplex operations. Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-11net/ethtool: add netlink interface for the PLCA RSPiergiorgio Beruto4-1/+313
Add support for configuring the PLCA Reconciliation Sublayer on multi-drop PHYs that support IEEE802.3cg-2019 Clause 148 (e.g., 10BASE-T1S). This patch adds the appropriate netlink interface to ethtool. Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28net/ethtool/ioctl: split ethtool_get_phy_stats into multiple helpersDaniil Tatianin1-33/+69
So that it's easier to follow and make sense of the branching and various conditions. Stats retrieval has been split into two separate functions ethtool_get_phy_stats_phydev & ethtool_get_phy_stats_ethtool. The former attempts to retrieve the stats using phydev & phy_ops, while the latter uses ethtool_ops. Actual n_stats validation & array allocation has been moved into a new ethtool_vzalloc_stats_array helper. This also fixes a potential NULL dereference of ops->get_ethtool_phy_stats where it was getting called in an else branch unconditionally without making sure it was actually present. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-21 03:52:22 +0300