summaryrefslogtreecommitdiff
path: root/net/core
AgeCommit message (Collapse)AuthorFilesLines
2022-04-25devlink: introduce line card device info infrastructureJiri Pirko1-1/+70
Extend the line card info message with information (e.g., FW version) about devices found on the line card. Example: $ devlink lc info pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 versions: fixed: hw.revision 0 running: ini.version 4 devices: device 0 versions: running: fw 19.2010.1310 device 1 versions: running: fw 19.2010.1310 device 2 versions: running: fw 19.2010.1310 device 3 versions: running: fw 19.2010.1310 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25devlink: introduce line card info get messageJiri Pirko1-4/+126
Allow the driver to provide per line card info get op to fill-up info, similar to the "devlink dev info". Example: $ devlink lc info pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 versions: fixed: hw.revision 0 running: ini.version 4 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25devlink: introduce line card devices supportJiri Pirko1-1/+103
Line card can contain one or more devices that makes sense to make visible to the user. For example, this can be a gearbox with flash memory, which could be updated. Provide the driver possibility to attach such devices to a line card and expose those to user. Example: $ devlink lc show pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 state active type 16x100G supported_types: 16x100G devices: device 0 device 1 device 2 device 3 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hookEyal Birger1-4/+3
xmit_check_hhlen() observes the dst for getting the device hard header length to make sure a modified packet can fit. When a helper which changes the dst - such as bpf_skb_set_tunnel_key() - is called as part of the xmit program the accessed dst is no longer valid. This leads to the following splat: BUG: kernel NULL pointer dereference, address: 00000000000000de #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 798 Comm: ping Not tainted 5.18.0-rc2+ #103 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 RIP: 0010:bpf_xmit+0xfb/0x17f Code: c6 c0 4d cd 8e 48 c7 c7 7d 33 f0 8e e8 42 09 fb ff 48 8b 45 58 48 8b 95 c8 00 00 00 48 2b 95 c0 00 00 00 48 83 e0 fe 48 8b 00 <0f> b7 80 de 00 00 00 39 c2 73 22 29 d0 b9 20 0a 00 00 31 d2 48 89 RSP: 0018:ffffb148c0bc7b98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000240008 RCX: 0000000000000000 RDX: 0000000000000010 RSI: 00000000ffffffea RDI: 00000000ffffffff RBP: ffff922a828a4e00 R08: ffffffff8f1350e8 R09: 00000000ffffdfff R10: ffffffff8f055100 R11: ffffffff8f105100 R12: 0000000000000000 R13: ffff922a828a4e00 R14: 0000000000000040 R15: 0000000000000000 FS: 00007f414e8f0080(0000) GS:ffff922afdc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000de CR3: 0000000002d80006 CR4: 0000000000370ef0 Call Trace: <TASK> lwtunnel_xmit.cold+0x71/0xc8 ip_finish_output2+0x279/0x520 ? __ip_finish_output.part.0+0x21/0x130 Fix by fetching the device hard header length before running the BPF code. Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure") Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220420165219.1755407-1-eyal.birger@gmail.com
2022-04-22ipv6: Use ipv6_only_sock() helper in condition.Kuniyuki Iwashima1-1/+1
This patch replaces some sk_ipv6only tests with ipv6_only_sock(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22Revert "rtnetlink: return EINVAL when request cannot succeed"Florent Fourcot1-1/+1
This reverts commit b6177d3240a4 ip-link command is testing kernel capability by sending a RTM_NEWLINK request, without any argument. It accepts everything in reply, except EOPNOTSUPP and EINVAL (functions iplink_have_newlink / accept_msg) So we must keep compatiblity here, invalid empty message should not return EINVAL Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Tested-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-21net: Change skb_ensure_writable()'s write_len param to unsigned int typeLiu Jian1-1/+1
Both pskb_may_pull() and skb_clone_writable()'s length parameters are of type unsigned int already. Therefore, change this function's write_len param to unsigned int type. Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20220416105801.88708-3-liujian56@huawei.com
2022-04-21bpf: Enlarge offset check value to INT_MAX in bpf_skb_{load,store}_bytesLiu Jian1-2/+2
The data length of skb frags + frag_list may be greater than 0xffff, and skb_header_pointer can not handle negative offset. So, here INT_MAX is used to check the validity of offset. Add the same change to the related function skb_store_bytes. Fixes: 05c74e5e53f6 ("bpf: add bpf_skb_load_bytes helper") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20220416105801.88708-2-liujian56@huawei.com
2022-04-20flow_dissector: Add number of vlan tags dissectorBoris Sukholitko1-0/+20
Our customers in the fiber telecom world have network configurations where they would like to control their traffic according to the number of tags appearing in the packet. For example, TR247 GPON conformance test suite specification mostly talks about untagged, single, double tagged packets and gives lax guidelines on the vlan protocol vs. number of vlan tags. This is different from the common IT networks where 802.1Q and 802.1ad protocols are usually describe single and double tagged packet. GPON configurations that we work with have arbitrary mix the above protocols and number of vlan tags in the packet. The goal is to make the following TC commands possible: tc filter add dev eth1 ingress flower \ num_of_vlans 1 vlan_prio 5 action drop From our logs, we have redirect rules such that: tc filter add dev $GPON ingress flower num_of_vlans $N \ action mirred egress redirect dev $DEV where N can range from 0 to 3 and $DEV is the function of $N. Also there are rules setting skb mark based on the number of vlans: tc filter add dev $GPON ingress flower num_of_vlans $N vlan_prio \ $P action skbedit mark $M This new dissector allows extracting the number of vlan tags existing in the packet. Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20bpf: Fix usage of trace RCU in local storage.KP Singh1-3/+3
bpf_{sk,task,inode}_storage_free() do not need to use call_rcu_tasks_trace as no BPF program should be accessing the owner as it's being destroyed. The only other reader at this point is bpf_local_storage_map_free() which uses normal RCU. The only path that needs trace RCU are: * bpf_local_storage_{delete,update} helpers * map_{delete,update}_elem() syscalls Fixes: 0fe4b381a59e ("bpf: Allow bpf_local_storage to be used by sleepable programs") Signed-off-by: KP Singh <kpsingh@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20220418155158.2865678-1-kpsingh@kernel.org
2022-04-19rtnetlink: return EINVAL when request cannot succeedFlorent Fourcot1-1/+1
A request without interface name/interface index/interface group cannot work. We should return EINVAL Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Signed-off-by: Brian Baboch <brian.baboch@wifirst.fr> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19rtnetlink: return ENODEV when IFLA_ALT_IFNAME is used in dellinkFlorent Fourcot1-1/+1
If IFLA_ALT_IFNAME is set and given interface is not found, we should return ENODEV and be consistent with IFLA_IFNAME behaviour This commit extends feature of commit 76c9ac0ee878, "net: rtnetlink: add possibility to use alternative names as message handle" CC: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Signed-off-by: Brian Baboch <brian.baboch@wifirst.fr> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19rtnetlink: enable alt_ifname for setlink/newlinkFlorent Fourcot1-40/+29
buffer called "ifname" given in function rtnl_dev_get is always valid when called by setlink/newlink, but contains only empty string when IFLA_IFNAME is not given. So IFLA_ALT_IFNAME is always ignored This patch fixes rtnl_dev_get function with a remove of ifname argument, and move ifname copy in do_setlink when required. It extends feature of commit 76c9ac0ee878, "net: rtnetlink: add possibility to use alternative names as message handle"" CC: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Signed-off-by: Brian Baboch <brian.baboch@wifirst.fr> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19rtnetlink: return ENODEV when ifname does not exist and group is givenFlorent Fourcot1-4/+14
When the interface does not exist, and a group is given, the given parameters are being set to all interfaces of the given group. The given IFNAME/ALT_IF_NAME are being ignored in that case. That can be dangerous since a typo (or a deleted interface) can produce weird side effects for caller: Case 1: IFLA_IFNAME=valid_interface IFLA_GROUP=1 MTU=1234 Case 1 will update MTU and group of the given interface "valid_interface". Case 2: IFLA_IFNAME=doesnotexist IFLA_GROUP=1 MTU=1234 Case 2 will update MTU of all interfaces in group 1. IFLA_IFNAME is ignored in this case This behaviour is not consistent and dangerous. In order to fix this issue, we now return ENODEV when the given IFNAME does not exist. Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Signed-off-by: Brian Baboch <brian.baboch@wifirst.fr> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19net: sched: use queue_mapping to pick tx queueTonghao Zhang1-2/+29
This patch fixes issue: * If we install tc filters with act_skbedit in clsact hook. It doesn't work, because netdev_core_pick_tx() overwrites queue_mapping. $ tc filter ... action skbedit queue_mapping 1 And this patch is useful: * We can use FQ + EDT to implement efficient policies. Tx queues are picked by xps, ndo_select_queue of netdev driver, or skb hash in netdev_core_pick_tx(). In fact, the netdev driver, and skb hash are _not_ under control. xps uses the CPUs map to select Tx queues, but we can't figure out which task_struct of pod/containter running on this cpu in most case. We can use clsact filters to classify one pod/container traffic to one Tx queue. Why ? In containter networking environment, there are two kinds of pod/ containter/net-namespace. One kind (e.g. P1, P2), the high throughput is key in these applications. But avoid running out of network resource, the outbound traffic of these pods is limited, using or sharing one dedicated Tx queues assigned HTB/TBF/FQ Qdisc. Other kind of pods (e.g. Pn), the low latency of data access is key. And the traffic is not limited. Pods use or share other dedicated Tx queues assigned FIFO Qdisc. This choice provides two benefits. First, contention on the HTB/FQ Qdisc lock is significantly reduced since fewer CPUs contend for the same queue. More importantly, Qdisc contention can be eliminated completely if each CPU has its own FIFO Qdisc for the second kind of pods. There must be a mechanism in place to support classifying traffic based on pods/container to different Tx queues. Note that clsact is outside of Qdisc while Qdisc can run a classifier to select a sub-queue under the lock. In general recording the decision in the skb seems a little heavy handed. This patch introduces a per-CPU variable, suggested by Eric. The xmit.skip_txqueue flag is firstly cleared in __dev_queue_xmit(). - Tx Qdisc may install that skbedit actions, then xmit.skip_txqueue flag is set in qdisc->enqueue() though tx queue has been selected in netdev_tx_queue_mapping() or netdev_core_pick_tx(). That flag is cleared firstly in __dev_queue_xmit(), is useful: - Avoid picking Tx queue with netdev_tx_queue_mapping() in next netdev in such case: eth0 macvlan - eth0.3 vlan - eth0 ixgbe-phy: For example, eth0, macvlan in pod, which root Qdisc install skbedit queue_mapping, send packets to eth0.3, vlan in host. In __dev_queue_xmit() of eth0.3, clear the flag, does not select tx queue according to skb->queue_mapping because there is no filters in clsact or tx Qdisc of this netdev. Same action taked in eth0, ixgbe in Host. - Avoid picking Tx queue for next packet. If we set xmit.skip_txqueue in tx Qdisc (qdisc->enqueue()), the proper way to clear it is clearing it in __dev_queue_xmit when processing next packets. For performance reasons, use the static key. If user does not config the NET_EGRESS, the patch will not be compiled. +----+ +----+ +----+ | P1 | | P2 | | Pn | +----+ +----+ +----+ | | | +-----------+-----------+ | | clsact/skbedit | MQ v +-----------+-----------+ | q0 | q1 | qn v v v HTB/FQ HTB/FQ ... FIFO Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Alexander Lobakin <alobakin@pm.me> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Talal Ahmad <talalahmad@google.com> Cc: Kevin Hao <haokexin@gmail.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Kees Cook <keescook@chromium.org> Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com> Cc: Antoine Tenart <atenart@kernel.org> Cc: Wei Wang <weiwan@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-18devlink: add port to line card relationship setJiri Pirko1-1/+25
In order to properly inform user about relationship between port and line card, introduce a driver API to set line card for a port. Use this information to extend port devlink netlink message by line card index and also include the line card index into phys_port_name and by that into a netdevice name. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18devlink: implement line card active stateJiri Pirko1-0/+41
Allow driver to mark a line card as active. Expose this state to the userspace over devlink netlink interface with proper notifications. 'active' state means that line card was plugged in after being provisioned. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18devlink: implement line card provisioningJiri Pirko1-3/+319
In order to be able to configure all needed stuff on a port/netdevice of a line card without the line card being present, introduce line card provisioning. Basically by setting a type, provisioning process will start and driver is supposed to create a placeholder for instances (ports/netdevices) for a line card type. Allow the user to query the supported line card types over line card get command. Then implement two netlink command SET to allow user to set/unset the card type. On the driver API side, add provision/unprovision ops and supported types array to be advertised. Upon provision op call, the driver should take care of creating the instances for the particular line card type. Introduce provision_set/clear() functions to be called by the driver once the provisioning/unprovisioning is done on its side. These helpers are not to be called directly due to the async nature of provisioning. Example: $ devlink port # No ports are listed $ devlink lc pci/0000:01:00.0: lc 1 state unprovisioned supported_types: 16x100G lc 2 state unprovisioned supported_types: 16x100G lc 3 state unprovisioned supported_types: 16x100G lc 4 state unprovisioned supported_types: 16x100G lc 5 state unprovisioned supported_types: 16x100G lc 6 state unprovisioned supported_types: 16x100G lc 7 state unprovisioned supported_types: 16x100G lc 8 state unprovisioned supported_types: 16x100G $ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G $ devlink lc show pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 state active type 16x100G supported_types: 16x100G $ devlink port pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4 pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4 pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4 pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4 pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4 pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4 pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4 pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4 pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4 pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4 pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4 pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4 pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4 pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4 pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4 pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4 $ devlink lc set pci/0000:01:00.0 lc 8 notype Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18devlink: add support to create line card and expose to userJiri Pirko1-1/+269
Extend the devlink API so the driver is going to be able to create and destroy linecard instances. There can be multiple line cards per devlink device. Expose this new type of object over devlink netlink API to the userspace, with notifications. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15net: page_pool: introduce ethtool statsLorenzo Bianconi1-1/+62
Introduce page_pool APIs to report stats through ethtool and reduce duplicated code in each driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni2-1/+5
2022-04-14rtnetlink: Fix handling of disabled L3 stats in RTM_GETSTATS repliesPetr Machata1-0/+3
When L3 stats are disabled, rtnl_offload_xstats_get_size_stats() returns size of 0, which is supposed to be an indication that the corresponding attribute should not be emitted. However, instead, the current code reserves a 0-byte attribute. The reason this does not show up as a citation on a kasan kernel is that netdev_offload_xstats_get(), which is supposed to fill in the data, never ends up getting called, because rtnl_offload_xstats_get_stats() notices that the stats are not actually used and skips the call. Thus a zero-length IFLA_OFFLOAD_XSTATS_L3_STATS attribute ends up in a response, confusing the userspace. Fix by skipping the L3-stats related block in rtnl_offload_xstats_fill(). Fixes: 0e7788fd7622 ("net: rtnetlink: Add UAPI for obtaining L3 offload xstats") Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/591b58e7623edc3eb66dd1fcfa8c8f133d090974.1649794741.git.petrm@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-13net: rtnetlink: add ndm flags and state mask attributesNikolay Aleksandrov1-0/+2
Add ndm flags/state masks which will be used for bulk delete filtering. All of these are used by the bridge and vxlan drivers. Also minimal attr policy validation is added, it is up to ndo_fdb_del_bulk implementers to further validate them. Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13net: rtnetlink: add NLM_F_BULK support to rtnl_fdb_delNikolay Aleksandrov1-19/+48
When NLM_F_BULK is specified in a fdb del message we need to handle it differently. First since this is a new call we can strictly validate the passed attributes, at first only ifindex and vlan are allowed as these will be the initially supported filter attributes, any other attribute is rejected. The mac address is no longer mandatory, but we use it to error out in older kernels because it cannot be specified with bulk request (the attribute is not allowed) and then we have to dispatch the call to ndo_fdb_del_bulk if the device supports it. The del bulk callback can do further validation of the attributes if necessary. Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13net: rtnetlink: add bulk delete support flagNikolay Aleksandrov1-0/+8
Add a new rtnl flag (RTNL_FLAG_BULK_DEL_SUPPORTED) which is used to verify that the delete operation allows bulk object deletion. Also emit a warning if anyone tries to set it for non-delete kind. Suggested-by: David Ahern <dsahern@kernel.org> Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13net: rtnetlink: add helper to extract msg type's kindNikolay Aleksandrov1-1/+1
Add a helper which extracts the msg type's kind using the kind mask (0x3). Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13net: rtnetlink: add msg kind namesNikolay Aleksandrov1-3/+3
Add rtnl kind names instead of using raw values. We'll need to check for DEL kind later to validate bulk flag support. Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-12page_pool: Add recycle stats to page_pool_put_page_bulkLorenzo Bianconi1-2/+13
Add missing recycle stats to page_pool_put_page_bulk routine. Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Link: https://lore.kernel.org/r/3712178b51c007cfaed910ea80e68f00c916b1fa.1649685634.git.lorenzo@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-12net: remove noblock parameter from recvmsg() entitiesOliver Hartkopp1-2/+1
The internal recvmsg() functions have two parameters 'flags' and 'noblock' that were merged inside skb_recv_datagram(). As a follow up patch to commit f4b41f062c42 ("net: remove noblock parameter from skb_recv_datagram()") this patch removes the separate 'noblock' parameter for recvmsg(). Analogue to the referenced patch for skb_recv_datagram() the 'flags' and 'noblock' parameters are unnecessarily split up with e.g. err = sk->sk_prot->recvmsg(sk, msg, size, flags & MSG_DONTWAIT, flags & ~MSG_DONTWAIT, &addr_len); or in err = INDIRECT_CALL_2(sk->sk_prot->recvmsg, tcp_recvmsg, udp_recvmsg, sk, msg, size, flags & MSG_DONTWAIT, flags & ~MSG_DONTWAIT, &addr_len); instead of simply using only flags all the time and check for MSG_DONTWAIT where needed (to preserve for the formerly separated no(n)block condition). Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20220411124955.154876-1-socketcan@hartkopp.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-11net: skb: rename SKB_DROP_REASON_PTYPE_ABSENTMenglong Dong1-5/+3
As David Ahern suggested, the reasons for skb drops should be more general and not be code based. Therefore, rename SKB_DROP_REASON_PTYPE_ABSENT to SKB_DROP_REASON_UNHANDLED_PROTO, which is used for the cases of no L3 protocol handler, no L4 protocol handler, version extensions, etc. From previous discussion, now we have the aim to make these reasons more abstract and users based, avoiding code based. Signed-off-by: Menglong Dong <imagedong@tencent.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-11net: sock: introduce sock_queue_rcv_skb_reason()Menglong Dong1-6/+24
In order to report the reasons of skb drops in 'sock_queue_rcv_skb()', introduce the function 'sock_queue_rcv_skb_reason()'. As the return value of 'sock_queue_rcv_skb()' is used as the error code, we can't make it as drop reason and have to pass extra output argument. 'sock_queue_rcv_skb()' is used in many places, so we can't change it directly. Introduce the new function 'sock_queue_rcv_skb_reason()' and make 'sock_queue_rcv_skb()' an inline call to it. Reviewed-by: Hao Peng <flyingpeng@tencent.com> Reviewed-by: Jiang Biao <benbjiang@tencent.com> Signed-off-by: Menglong Dong <imagedong@tencent.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-08flow_dissector: fix false-positive __read_overflow2_field() warningJakub Kicinski1-1/+1
Bounds checking is unhappy that we try to copy both Ethernet addresses but pass pointer to the first one. Luckily destination address is the first field so pass the pointer to the entire header, whatever. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-08net/sched: flower: fix parsing of ethertype following VLAN headerVlad Buslov1-0/+1
A tc flower filter matching TCA_FLOWER_KEY_VLAN_ETH_TYPE is expected to match the L2 ethertype following the first VLAN header, as confirmed by linked discussion with the maintainer. However, such rule also matches packets that have additional second VLAN header, even though filter has both eth_type and vlan_ethtype set to "ipv4". Looking at the code this seems to be mostly an artifact of the way flower uses flow dissector. First, even though looking at the uAPI eth_type and vlan_ethtype appear like a distinct fields, in flower they are all mapped to the same key->basic.n_proto. Second, flow dissector skips following VLAN header as no keys for FLOW_DISSECTOR_KEY_CVLAN are set and eventually assigns the value of n_proto to last parsed header. With these, such filters ignore any headers present between first VLAN header and first "non magic" header (ipv4 in this case) that doesn't result FLOW_DISSECT_RET_PROTO_AGAIN. Fix the issue by extending flow dissector VLAN key structure with new 'vlan_eth_type' field that matches first ethertype following previously parsed VLAN header. Modify flower classifier to set the new flow_dissector_key_vlan->vlan_eth_type with value obtained from TCA_FLOWER_KEY_VLAN_ETH_TYPE/TCA_FLOWER_KEY_CVLAN_ETH_TYPE uAPIs. Link: https://lore.kernel.org/all/Yjhgi48BpTGh6dig@nanopsycho/ Fixes: 9399ae9a6cb2 ("net_sched: flower: Add vlan support") Fixes: d64efd0926ba ("net/sched: flower: Add supprt for matching on QinQ vlan headers") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-8/+24
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-08net-core: rx_otherhost_dropped to core_statsJeffrey Ji1-0/+1
Increment rx_otherhost_dropped counter when packet dropped due to mismatched dest MAC addr. An example when this drop can occur is when manually crafting raw packets that will be consumed by a user space application via a tap device. For testing purposes local traffic was generated using trafgen for the client and netcat to start a server Tested: Created 2 netns, sent 1 packet using trafgen from 1 to the other with "{eth(daddr=$INCORRECT_MAC...}", verified that iproute2 showed the counter was incremented. (Also had to modify iproute2 to show the stat, additional patch for that coming next.) Signed-off-by: Jeffrey Ji <jeffreyji@google.com> Reviewed-by: Brian Vazquez <brianvv@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220406172600.1141083-1-jeffreyjilinux@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-08net: extract a few internals from netdevice.hJakub Kicinski10-0/+106
There's a number of functions and static variables used under net/core/ but not from the outside. We currently dump most of them into netdevice.h. That bad for many reasons: - netdevice.h is very cluttered, hard to figure out what the APIs are; - netdevice.h is very long; - we have to touch netdevice.h more which causes expensive incremental builds. Create a header under net/core/ and move some declarations. The new header is also a bit of a catch-all but that's fine, if we create more specific headers people will likely over-think where their declaration fit best. And end up putting them in netdevice.h, again. More work should be done on splitting netdevice.h into more targeted headers, but that'd be more time consuming so small steps. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-08net: unexport a handful of dev_* functionsJakub Kicinski1-6/+0
We have a bunch of functions which are only used under net/core/ yet they get exported. Remove the exports. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-07Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski1-4/+13
Alexei Starovoitov says: ==================== pull-request: bpf 2022-04-06 We've added 8 non-merge commits during the last 8 day(s) which contain a total of 9 files changed, 139 insertions(+), 36 deletions(-). The main changes are: 1) rethook related fixes, from Jiri and Masami. 2) Fix the case when tracing bpf prog is attached to struct_ops, from Martin. 3) Support dual-stack sockets in bpf_tcp_check_syncookie, from Maxim. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Adjust bpf_tcp_check_syncookie selftest to test dual-stack sockets bpf: Support dual-stack sockets in bpf_tcp_check_syncookie bpf: selftests: Test fentry tracing a struct_ops program bpf: Resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT rethook: Fix to use WRITE_ONCE() for rethook:: Handler selftests/bpf: Fix warning comparing pointer to 0 bpf: Fix sparse warnings in kprobe_multi_resolve_syms bpftool: Explicit errno handling in skeletons ==================== Link: https://lore.kernel.org/r/20220407031245.73026-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-06tcp: add accessors to read/set tp->snd_cwndEric Dumazet1-1/+1
We had various bugs over the years with code breaking the assumption that tp->snd_cwnd is greater than zero. Lately, syzbot reported the WARN_ON_ONCE(!tp->prior_cwnd) added in commit 8b8a321ff72c ("tcp: fix zero cwnd in tcp_cwnd_reduction") can trigger, and without a repro we would have to spend considerable time finding the bug. Instead of complaining too late, we want to catch where and when tp->snd_cwnd is set to an illegal value. Signed-off-by: Eric Dumazet <edumazet@google.com> Suggested-by: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Link: https://lore.kernel.org/r/20220405233538.947344-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-06bpf: Support dual-stack sockets in bpf_tcp_check_syncookieMaxim Mikityanskiy1-4/+13
bpf_tcp_gen_syncookie looks at the IP version in the IP header and validates the address family of the socket. It supports IPv4 packets in AF_INET6 dual-stack sockets. On the other hand, bpf_tcp_check_syncookie looks only at the address family of the socket, ignoring the real IP version in headers, and validates only the packet size. This implementation has some drawbacks: 1. Packets are not validated properly, allowing a BPF program to trick bpf_tcp_check_syncookie into handling an IPv6 packet on an IPv4 socket. 2. Dual-stack sockets fail the checks on IPv4 packets. IPv4 clients end up receiving a SYNACK with the cookie, but the following ACK gets dropped. This patch fixes these issues by changing the checks in bpf_tcp_check_syncookie to match the ones in bpf_tcp_gen_syncookie. IP version from the header is taken into account, and it is validated properly with address family. Fixes: 399040847084 ("bpf: add helper to check for a valid SYN cookie") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Acked-by: Arthur Fabre <afabre@cloudflare.com> Link: https://lore.kernel.org/bpf/20220406124113.2795730-1-maximmi@nvidia.com
2022-04-06net: ethernet: mtk_eth_soc: implement flow offloading to WED devicesFelix Fietkau1-0/+4
This allows hardware flow offloading from Ethernet to WLAN on MT7622 SoC Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-06net: remove noblock parameter from skb_recv_datagram()Oliver Hartkopp1-3/+2
skb_recv_datagram() has two parameters 'flags' and 'noblock' that are merged inside skb_recv_datagram() by 'flags | (noblock ? MSG_DONTWAIT : 0)' As 'flags' may contain MSG_DONTWAIT as value most callers split the 'flags' into 'flags' and 'noblock' with finally obsolete bit operations like this: skb_recv_datagram(sk, flags & ~MSG_DONTWAIT, flags & MSG_DONTWAIT, &rc); And this is not even done consistently with the 'flags' parameter. This patch removes the obsolete and costly splitting into two parameters and only performs bit operations when really needed on the caller side. One missing conversion thankfully reported by kernel test robot. I missed to enable kunit tests to build the mctp code. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-06net: ensure net_todo_list is processed quicklyJohannes Berg2-1/+34
In [1], Will raised a potential issue that the cfg80211 code, which does (from a locking perspective) rtnl_lock() wiphy_lock() rtnl_unlock() might be suspectible to ABBA deadlocks, because rtnl_unlock() calls netdev_run_todo(), which might end up calling rtnl_lock() again, which could then deadlock (see the comment in the code added here for the scenario). Some back and forth and thinking ensued, but clearly this can't happen if the net_todo_list is empty at the rtnl_unlock() here. Clearly, the code here cannot actually put an entry on it, and all other users of rtnl_unlock() will empty it since that will always go through netdev_run_todo(), emptying the list. So the only other way to get there would be to add to the list and then unlock the RTNL without going through rtnl_unlock(), which is only possible through __rtnl_unlock(). However, this isn't exported and not used in many places, and none of them seem to be able to unregister before using it. Therefore, add a WARN_ON() in the code to ensure this invariant won't be broken, so that the cfg80211 (or any similar) code stays safe. [1] https://lore.kernel.org/r/Yjzpo3TfZxtKPMAG@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220404113847.0ee02e4a70da.Ic73d206e217db20fd22dcec14fe5442ca732804b@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-01skbuff: fix coalescing for page_pool fragment recyclingJean-Philippe Brucker1-4/+11
Fix a use-after-free when using page_pool with page fragments. We encountered this problem during normal RX in the hns3 driver: (1) Initially we have three descriptors in the RX queue. The first one allocates PAGE1 through page_pool, and the other two allocate one half of PAGE2 each. Page references look like this: RX_BD1 _______ PAGE1 RX_BD2 _______ PAGE2 RX_BD3 _________/ (2) Handle RX on the first descriptor. Allocate SKB1, eventually added to the receive queue by tcp_queue_rcv(). (3) Handle RX on the second descriptor. Allocate SKB2 and pass it to netif_receive_skb(): netif_receive_skb(SKB2) ip_rcv(SKB2) SKB3 = skb_clone(SKB2) SKB2 and SKB3 share a reference to PAGE2 through skb_shinfo()->dataref. The other ref to PAGE2 is still held by RX_BD3: SKB2 ---+- PAGE2 SKB3 __/ / RX_BD3 _________/ (3b) Now while handling TCP, coalesce SKB3 with SKB1: tcp_v4_rcv(SKB3) tcp_try_coalesce(to=SKB1, from=SKB3) // succeeds kfree_skb_partial(SKB3) skb_release_data(SKB3) // drops one dataref SKB1 _____ PAGE1 \____ SKB2 _____ PAGE2 / RX_BD3 _________/ In skb_try_coalesce(), __skb_frag_ref() takes a page reference to PAGE2, where it should instead have increased the page_pool frag reference, pp_frag_count. Without coalescing, when releasing both SKB2 and SKB3, a single reference to PAGE2 would be dropped. Now when releasing SKB1 and SKB2, two references to PAGE2 will be dropped, resulting in underflow. (3c) Drop SKB2: af_packet_rcv(SKB2) consume_skb(SKB2) skb_release_data(SKB2) // drops second dataref page_pool_return_skb_page(PAGE2) // drops one pp_frag_count SKB1 _____ PAGE1 \____ PAGE2 / RX_BD3 _________/ (4) Userspace calls recvmsg() Copies SKB1 and releases it. Since SKB3 was coalesced with SKB1, we release the SKB3 page as well: tcp_eat_recv_skb(SKB1) skb_release_data(SKB1) page_pool_return_skb_page(PAGE1) page_pool_return_skb_page(PAGE2) // drops second pp_frag_count (5) PAGE2 is freed, but the third RX descriptor was still using it! In our case this causes IOMMU faults, but it would silently corrupt memory if the IOMMU was disabled. Change the logic that checks whether pp_recycle SKBs can be coalesced. We still reject differing pp_recycle between 'from' and 'to' SKBs, but in order to avoid the situation described above, we also reject coalescing when both 'from' and 'to' are pp_recycled and 'from' is cloned. The new logic allows coalescing a cloned pp_recycle SKB into a page refcounted one, because in this case the release (4) will drop the right reference, the one taken by skb_try_coalesce(). Fixes: 53e0961da1c7 ("page_pool: add frag page recycling support in page pool") Suggested-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-29net: move net_unlink_todo() out of the headerJohannes Berg1-0/+10
There's no reason for this to be in netdevice.h, it's all just used in dev.c. Also make it no longer inline and let the compiler decide to do that by itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220325225023.f49b9056fe1c.I6b901a2df00000837a9bd251a8dd259bd23f5ded@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-24Merge tag 'net-next-5.18' of ↵Linus Torvalds21-559/+1999
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ...
2022-03-22Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski4-90/+104
Alexei Starovoitov says: ==================== pull-request: bpf-next 2022-03-21 v2 We've added 137 non-merge commits during the last 17 day(s) which contain a total of 143 files changed, 7123 insertions(+), 1092 deletions(-). The main changes are: 1) Custom SEC() handling in libbpf, from Andrii. 2) subskeleton support, from Delyan. 3) Use btf_tag to recognize __percpu pointers in the verifier, from Hao. 4) Fix net.core.bpf_jit_harden race, from Hou. 5) Fix bpf_sk_lookup remote_port on big-endian, from Jakub. 6) Introduce fprobe (multi kprobe) _without_ arch bits, from Masami. The arch specific bits will come later. 7) Introduce multi_kprobe bpf programs on top of fprobe, from Jiri. 8) Enable non-atomic allocations in local storage, from Joanne. 9) Various var_off ptr_to_btf_id fixed, from Kumar. 10) bpf_ima_file_hash helper, from Roberto. 11) Add "live packet" mode for XDP in BPF_PROG_RUN, from Toke. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (137 commits) selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" bpftool: Fix a bug in subskeleton code generation bpf: Fix bpf_prog_pack when PMU_SIZE is not defined bpf: Fix bpf_prog_pack for multi-node setup bpf: Fix warning for cast from restricted gfp_t in verifier bpf, arm: Fix various typos in comments libbpf: Close fd in bpf_object__reuse_map bpftool: Fix print error when show bpf map bpf: Fix kprobe_multi return probe backtrace Revert "bpf: Add support to inline bpf_get_func_ip helper on x86" bpf: Simplify check in btf_parse_hdr() selftests/bpf/test_lirc_mode2.sh: Exit with proper code bpf: Check for NULL return from bpf_get_btf_vmlinux selftests/bpf: Test skipping stacktrace bpf: Adjust BPF stack helper functions to accommodate skip > 0 bpf: Select proper size for bpf_prog_pack ... ==================== Link: https://lore.kernel.org/r/20220322050159.5507-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21net: Revert the softirq will run annotation in ____napi_schedule().Sebastian Andrzej Siewior1-2/+1
The lockdep annotation lockdep_assert_softirq_will_run() expects that either hard or soft interrupts are disabled because both guaranty that the "raised" soft-interrupts will be processed once the context is left. This triggers in flush_smp_call_function_from_idle() but it this case it explicitly calls do_softirq() in case of pending softirqs. Revert the "softirq will run" annotation in ____napi_schedule() and move the check back to __netif_rx() as it was. Keep the IRQ-off assert in ____napi_schedule() because this is always required. Fixes: fbd9a2ceba5c7 ("net: Add lockdep asserts to ____napi_schedule().") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/YjhD3ZKWysyw8rc6@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21devlink: hold the instance lock during eswitch_mode callbacksJakub Kicinski1-6/+0
Make the devlink core hold the instance lock during eswitch_mode callbacks. Cheat in case of mlx5 (see the cover letter). Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21devlink: add explicitly locked flavor of the rate node APIsJakub Kicinski1-25/+61
We'll need an explicitly locked rate node API for netdevsim to switch eswitch mode setting to locked. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 14:29:12 +0300